| /* | |
| * linux/drivers/ide/ide-disk.c Version 1.18 Mar 05, 2003 | |
| * | |
| * Copyright (C) 1994-1998 Linus Torvalds & authors (see below) | |
| * Copyright (C) 1998-2002 Linux ATA Development | |
| * Andre Hedrick <andre@linux-ide.org> | |
| * Copyright (C) 2003 Red Hat <alan@redhat.com> | |
| */ | |
| /* | |
| * Mostly written by Mark Lord <mlord@pobox.com> | |
| * and Gadi Oxman <gadio@netvision.net.il> | |
| * and Andre Hedrick <andre@linux-ide.org> | |
| * | |
| * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c. | |
| * | |
| * Version 1.00 move disk only code from ide.c to ide-disk.c | |
| * support optional byte-swapping of all data | |
| * Version 1.01 fix previous byte-swapping code | |
| * Version 1.02 remove ", LBA" from drive identification msgs | |
| * Version 1.03 fix display of id->buf_size for big-endian | |
| * Version 1.04 add /proc configurable settings and S.M.A.R.T support | |
| * Version 1.05 add capacity support for ATA3 >= 8GB | |
| * Version 1.06 get boot-up messages to show full cyl count | |
| * Version 1.07 disable door-locking if it fails | |
| * Version 1.08 fixed CHS/LBA translations for ATA4 > 8GB, | |
| * process of adding new ATA4 compliance. | |
| * fixed problems in allowing fdisk to see | |
| * the entire disk. | |
| * Version 1.09 added increment of rq->sector in ide_multwrite | |
| * added UDMA 3/4 reporting | |
| * Version 1.10 request queue changes, Ultra DMA 100 | |
| * Version 1.11 added 48-bit lba | |
| * Version 1.12 adding taskfile io access method | |
| * Version 1.13 added standby and flush-cache for notifier | |
| * Version 1.14 added acoustic-wcache | |
| * Version 1.15 convert all calls to ide_raw_taskfile | |
| * since args will return register content. | |
| * Version 1.16 added suspend-resume-checkpower | |
| * Version 1.17 do flush on standby, do flush on ATA < ATA6 | |
| * fix wcache setup. | |
| */ | |
| #define IDEDISK_VERSION "1.18" | |
| #undef REALLY_SLOW_IO /* most systems can safely undef this */ | |
| //#define DEBUG | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/string.h> | |
| #include <linux/kernel.h> | |
| #include <linux/timer.h> | |
| #include <linux/mm.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/major.h> | |
| #include <linux/errno.h> | |
| #include <linux/genhd.h> | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/mutex.h> | |
| #include <linux/leds.h> | |
| #define _IDE_DISK | |
| #include <linux/ide.h> | |
| #include <asm/byteorder.h> | |
| #include <asm/irq.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/io.h> | |
| #include <asm/div64.h> | |
| struct ide_disk_obj { | |
| ide_drive_t *drive; | |
| ide_driver_t *driver; | |
| struct gendisk *disk; | |
| struct kref kref; | |
| }; | |
| static DEFINE_MUTEX(idedisk_ref_mutex); | |
| #define to_ide_disk(obj) container_of(obj, struct ide_disk_obj, kref) | |
| #define ide_disk_g(disk) \ | |
| container_of((disk)->private_data, struct ide_disk_obj, driver) | |
| static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) | |
| { | |
| struct ide_disk_obj *idkp = NULL; | |
| mutex_lock(&idedisk_ref_mutex); | |
| idkp = ide_disk_g(disk); | |
| if (idkp) | |
| kref_get(&idkp->kref); | |
| mutex_unlock(&idedisk_ref_mutex); | |
| return idkp; | |
| } | |
| static void ide_disk_release(struct kref *); | |
| static void ide_disk_put(struct ide_disk_obj *idkp) | |
| { | |
| mutex_lock(&idedisk_ref_mutex); | |
| kref_put(&idkp->kref, ide_disk_release); | |
| mutex_unlock(&idedisk_ref_mutex); | |
| } | |
| /* | |
| * lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity" | |
| * value for this drive (from its reported identification information). | |
| * | |
| * Returns: 1 if lba_capacity looks sensible | |
| * 0 otherwise | |
| * | |
| * It is called only once for each drive. | |
| */ | |
| static int lba_capacity_is_ok (struct hd_driveid *id) | |
| { | |
| unsigned long lba_sects, chs_sects, head, tail; | |
| /* No non-LBA info .. so valid! */ | |
| if (id->cyls == 0) | |
| return 1; | |
| /* | |
| * The ATA spec tells large drives to return | |
| * C/H/S = 16383/16/63 independent of their size. | |
| * Some drives can be jumpered to use 15 heads instead of 16. | |
| * Some drives can be jumpered to use 4092 cyls instead of 16383. | |
| */ | |
| if ((id->cyls == 16383 | |
| || (id->cyls == 4092 && id->cur_cyls == 16383)) && | |
| id->sectors == 63 && | |
| (id->heads == 15 || id->heads == 16) && | |
| (id->lba_capacity >= 16383*63*id->heads)) | |
| return 1; | |
| lba_sects = id->lba_capacity; | |
| chs_sects = id->cyls * id->heads * id->sectors; | |
| /* perform a rough sanity check on lba_sects: within 10% is OK */ | |
| if ((lba_sects - chs_sects) < chs_sects/10) | |
| return 1; | |
| /* some drives have the word order reversed */ | |
| head = ((lba_sects >> 16) & 0xffff); | |
| tail = (lba_sects & 0xffff); | |
| lba_sects = (head | (tail << 16)); | |
| if ((lba_sects - chs_sects) < chs_sects/10) { | |
| id->lba_capacity = lba_sects; | |
| return 1; /* lba_capacity is (now) good */ | |
| } | |
| return 0; /* lba_capacity value may be bad */ | |
| } | |
| /* | |
| * __ide_do_rw_disk() issues READ and WRITE commands to a disk, | |
| * using LBA if supported, or CHS otherwise, to address sectors. | |
| */ | |
| static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block) | |
| { | |
| ide_hwif_t *hwif = HWIF(drive); | |
| unsigned int dma = drive->using_dma; | |
| u8 lba48 = (drive->addressing == 1) ? 1 : 0; | |
| task_ioreg_t command = WIN_NOP; | |
| ata_nsector_t nsectors; | |
| nsectors.all = (u16) rq->nr_sectors; | |
| if (hwif->no_lba48_dma && lba48 && dma) { | |
| if (block + rq->nr_sectors > 1ULL << 28) | |
| dma = 0; | |
| else | |
| lba48 = 0; | |
| } | |
| if (!dma) { | |
| ide_init_sg_cmd(drive, rq); | |
| ide_map_sg(drive, rq); | |
| } | |
| if (IDE_CONTROL_REG) | |
| hwif->OUTB(drive->ctl, IDE_CONTROL_REG); | |
| /* FIXME: SELECT_MASK(drive, 0) ? */ | |
| if (drive->select.b.lba) { | |
| if (lba48) { | |
| task_ioreg_t tasklets[10]; | |
| pr_debug("%s: LBA=0x%012llx\n", drive->name, | |
| (unsigned long long)block); | |
| tasklets[0] = 0; | |
| tasklets[1] = 0; | |
| tasklets[2] = nsectors.b.low; | |
| tasklets[3] = nsectors.b.high; | |
| tasklets[4] = (task_ioreg_t) block; | |
| tasklets[5] = (task_ioreg_t) (block>>8); | |
| tasklets[6] = (task_ioreg_t) (block>>16); | |
| tasklets[7] = (task_ioreg_t) (block>>24); | |
| if (sizeof(block) == 4) { | |
| tasklets[8] = (task_ioreg_t) 0; | |
| tasklets[9] = (task_ioreg_t) 0; | |
| } else { | |
| tasklets[8] = (task_ioreg_t)((u64)block >> 32); | |
| tasklets[9] = (task_ioreg_t)((u64)block >> 40); | |
| } | |
| #ifdef DEBUG | |
| printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n", | |
| drive->name, tasklets[3], tasklets[2], | |
| tasklets[9], tasklets[8], tasklets[7], | |
| tasklets[6], tasklets[5], tasklets[4]); | |
| #endif | |
| hwif->OUTB(tasklets[1], IDE_FEATURE_REG); | |
| hwif->OUTB(tasklets[3], IDE_NSECTOR_REG); | |
| hwif->OUTB(tasklets[7], IDE_SECTOR_REG); | |
| hwif->OUTB(tasklets[8], IDE_LCYL_REG); | |
| hwif->OUTB(tasklets[9], IDE_HCYL_REG); | |
| hwif->OUTB(tasklets[0], IDE_FEATURE_REG); | |
| hwif->OUTB(tasklets[2], IDE_NSECTOR_REG); | |
| hwif->OUTB(tasklets[4], IDE_SECTOR_REG); | |
| hwif->OUTB(tasklets[5], IDE_LCYL_REG); | |
| hwif->OUTB(tasklets[6], IDE_HCYL_REG); | |
| hwif->OUTB(0x00|drive->select.all,IDE_SELECT_REG); | |
| } else { | |
| hwif->OUTB(0x00, IDE_FEATURE_REG); | |
| hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); | |
| hwif->OUTB(block, IDE_SECTOR_REG); | |
| hwif->OUTB(block>>=8, IDE_LCYL_REG); | |
| hwif->OUTB(block>>=8, IDE_HCYL_REG); | |
| hwif->OUTB(((block>>8)&0x0f)|drive->select.all,IDE_SELECT_REG); | |
| } | |
| } else { | |
| unsigned int sect,head,cyl,track; | |
| track = (int)block / drive->sect; | |
| sect = (int)block % drive->sect + 1; | |
| hwif->OUTB(sect, IDE_SECTOR_REG); | |
| head = track % drive->head; | |
| cyl = track / drive->head; | |
| pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect); | |
| hwif->OUTB(0x00, IDE_FEATURE_REG); | |
| hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); | |
| hwif->OUTB(cyl, IDE_LCYL_REG); | |
| hwif->OUTB(cyl>>8, IDE_HCYL_REG); | |
| hwif->OUTB(head|drive->select.all,IDE_SELECT_REG); | |
| } | |
| if (dma) { | |
| if (!hwif->dma_setup(drive)) { | |
| if (rq_data_dir(rq)) { | |
| command = lba48 ? WIN_WRITEDMA_EXT : WIN_WRITEDMA; | |
| if (drive->vdma) | |
| command = lba48 ? WIN_WRITE_EXT: WIN_WRITE; | |
| } else { | |
| command = lba48 ? WIN_READDMA_EXT : WIN_READDMA; | |
| if (drive->vdma) | |
| command = lba48 ? WIN_READ_EXT: WIN_READ; | |
| } | |
| hwif->dma_exec_cmd(drive, command); | |
| hwif->dma_start(drive); | |
| return ide_started; | |
| } | |
| /* fallback to PIO */ | |
| ide_init_sg_cmd(drive, rq); | |
| } | |
| if (rq_data_dir(rq) == READ) { | |
| if (drive->mult_count) { | |
| hwif->data_phase = TASKFILE_MULTI_IN; | |
| command = lba48 ? WIN_MULTREAD_EXT : WIN_MULTREAD; | |
| } else { | |
| hwif->data_phase = TASKFILE_IN; | |
| command = lba48 ? WIN_READ_EXT : WIN_READ; | |
| } | |
| ide_execute_command(drive, command, &task_in_intr, WAIT_CMD, NULL); | |
| return ide_started; | |
| } else { | |
| if (drive->mult_count) { | |
| hwif->data_phase = TASKFILE_MULTI_OUT; | |
| command = lba48 ? WIN_MULTWRITE_EXT : WIN_MULTWRITE; | |
| } else { | |
| hwif->data_phase = TASKFILE_OUT; | |
| command = lba48 ? WIN_WRITE_EXT : WIN_WRITE; | |
| } | |
| /* FIXME: ->OUTBSYNC ? */ | |
| hwif->OUTB(command, IDE_COMMAND_REG); | |
| return pre_task_out_intr(drive, rq); | |
| } | |
| } | |
| /* | |
| * 268435455 == 137439 MB or 28bit limit | |
| * 320173056 == 163929 MB or 48bit addressing | |
| * 1073741822 == 549756 MB or 48bit addressing fake drive | |
| */ | |
| static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block) | |
| { | |
| ide_hwif_t *hwif = HWIF(drive); | |
| BUG_ON(drive->blocked); | |
| if (!blk_fs_request(rq)) { | |
| blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command"); | |
| ide_end_request(drive, 0, 0); | |
| return ide_stopped; | |
| } | |
| ledtrig_ide_activity(); | |
| pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n", | |
| drive->name, rq_data_dir(rq) == READ ? "read" : "writ", | |
| (unsigned long long)block, rq->nr_sectors, | |
| (unsigned long)rq->buffer); | |
| if (hwif->rw_disk) | |
| hwif->rw_disk(drive, rq); | |
| return __ide_do_rw_disk(drive, rq, block); | |
| } | |
| /* | |
| * Queries for true maximum capacity of the drive. | |
| * Returns maximum LBA address (> 0) of the drive, 0 if failed. | |
| */ | |
| static unsigned long idedisk_read_native_max_address(ide_drive_t *drive) | |
| { | |
| ide_task_t args; | |
| unsigned long addr = 0; | |
| /* Create IDE/ATA command request structure */ | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| args.tfRegister[IDE_SELECT_OFFSET] = 0x40; | |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_READ_NATIVE_MAX; | |
| args.command_type = IDE_DRIVE_TASK_NO_DATA; | |
| args.handler = &task_no_data_intr; | |
| /* submit command request */ | |
| ide_raw_taskfile(drive, &args, NULL); | |
| /* if OK, compute maximum address value */ | |
| if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | |
| addr = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24) | |
| | ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16) | |
| | ((args.tfRegister[ IDE_LCYL_OFFSET] ) << 8) | |
| | ((args.tfRegister[IDE_SECTOR_OFFSET] )); | |
| addr++; /* since the return value is (maxlba - 1), we add 1 */ | |
| } | |
| return addr; | |
| } | |
| static unsigned long long idedisk_read_native_max_address_ext(ide_drive_t *drive) | |
| { | |
| ide_task_t args; | |
| unsigned long long addr = 0; | |
| /* Create IDE/ATA command request structure */ | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| args.tfRegister[IDE_SELECT_OFFSET] = 0x40; | |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_READ_NATIVE_MAX_EXT; | |
| args.command_type = IDE_DRIVE_TASK_NO_DATA; | |
| args.handler = &task_no_data_intr; | |
| /* submit command request */ | |
| ide_raw_taskfile(drive, &args, NULL); | |
| /* if OK, compute maximum address value */ | |
| if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | |
| u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) | | |
| (args.hobRegister[IDE_LCYL_OFFSET] << 8) | | |
| args.hobRegister[IDE_SECTOR_OFFSET]; | |
| u32 low = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) | | |
| ((args.tfRegister[IDE_LCYL_OFFSET])<<8) | | |
| (args.tfRegister[IDE_SECTOR_OFFSET]); | |
| addr = ((__u64)high << 24) | low; | |
| addr++; /* since the return value is (maxlba - 1), we add 1 */ | |
| } | |
| return addr; | |
| } | |
| /* | |
| * Sets maximum virtual LBA address of the drive. | |
| * Returns new maximum virtual LBA address (> 0) or 0 on failure. | |
| */ | |
| static unsigned long idedisk_set_max_address(ide_drive_t *drive, unsigned long addr_req) | |
| { | |
| ide_task_t args; | |
| unsigned long addr_set = 0; | |
| addr_req--; | |
| /* Create IDE/ATA command request structure */ | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| args.tfRegister[IDE_SECTOR_OFFSET] = ((addr_req >> 0) & 0xff); | |
| args.tfRegister[IDE_LCYL_OFFSET] = ((addr_req >> 8) & 0xff); | |
| args.tfRegister[IDE_HCYL_OFFSET] = ((addr_req >> 16) & 0xff); | |
| args.tfRegister[IDE_SELECT_OFFSET] = ((addr_req >> 24) & 0x0f) | 0x40; | |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SET_MAX; | |
| args.command_type = IDE_DRIVE_TASK_NO_DATA; | |
| args.handler = &task_no_data_intr; | |
| /* submit command request */ | |
| ide_raw_taskfile(drive, &args, NULL); | |
| /* if OK, read new maximum address value */ | |
| if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | |
| addr_set = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24) | |
| | ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16) | |
| | ((args.tfRegister[ IDE_LCYL_OFFSET] ) << 8) | |
| | ((args.tfRegister[IDE_SECTOR_OFFSET] )); | |
| addr_set++; | |
| } | |
| return addr_set; | |
| } | |
| static unsigned long long idedisk_set_max_address_ext(ide_drive_t *drive, unsigned long long addr_req) | |
| { | |
| ide_task_t args; | |
| unsigned long long addr_set = 0; | |
| addr_req--; | |
| /* Create IDE/ATA command request structure */ | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| args.tfRegister[IDE_SECTOR_OFFSET] = ((addr_req >> 0) & 0xff); | |
| args.tfRegister[IDE_LCYL_OFFSET] = ((addr_req >>= 8) & 0xff); | |
| args.tfRegister[IDE_HCYL_OFFSET] = ((addr_req >>= 8) & 0xff); | |
| args.tfRegister[IDE_SELECT_OFFSET] = 0x40; | |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SET_MAX_EXT; | |
| args.hobRegister[IDE_SECTOR_OFFSET] = (addr_req >>= 8) & 0xff; | |
| args.hobRegister[IDE_LCYL_OFFSET] = (addr_req >>= 8) & 0xff; | |
| args.hobRegister[IDE_HCYL_OFFSET] = (addr_req >>= 8) & 0xff; | |
| args.hobRegister[IDE_SELECT_OFFSET] = 0x40; | |
| args.hobRegister[IDE_CONTROL_OFFSET_HOB]= (drive->ctl|0x80); | |
| args.command_type = IDE_DRIVE_TASK_NO_DATA; | |
| args.handler = &task_no_data_intr; | |
| /* submit command request */ | |
| ide_raw_taskfile(drive, &args, NULL); | |
| /* if OK, compute maximum address value */ | |
| if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | |
| u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) | | |
| (args.hobRegister[IDE_LCYL_OFFSET] << 8) | | |
| args.hobRegister[IDE_SECTOR_OFFSET]; | |
| u32 low = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) | | |
| ((args.tfRegister[IDE_LCYL_OFFSET])<<8) | | |
| (args.tfRegister[IDE_SECTOR_OFFSET]); | |
| addr_set = ((__u64)high << 24) | low; | |
| addr_set++; | |
| } | |
| return addr_set; | |
| } | |
| static unsigned long long sectors_to_MB(unsigned long long n) | |
| { | |
| n <<= 9; /* make it bytes */ | |
| do_div(n, 1000000); /* make it MB */ | |
| return n; | |
| } | |
| /* | |
| * Bits 10 of command_set_1 and cfs_enable_1 must be equal, | |
| * so on non-buggy drives we need test only one. | |
| * However, we should also check whether these fields are valid. | |
| */ | |
| static inline int idedisk_supports_hpa(const struct hd_driveid *id) | |
| { | |
| return (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400); | |
| } | |
| /* | |
| * The same here. | |
| */ | |
| static inline int idedisk_supports_lba48(const struct hd_driveid *id) | |
| { | |
| return (id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400) | |
| && id->lba_capacity_2; | |
| } | |
| static void idedisk_check_hpa(ide_drive_t *drive) | |
| { | |
| unsigned long long capacity, set_max; | |
| int lba48 = idedisk_supports_lba48(drive->id); | |
| capacity = drive->capacity64; | |
| if (lba48) | |
| set_max = idedisk_read_native_max_address_ext(drive); | |
| else | |
| set_max = idedisk_read_native_max_address(drive); | |
| if (set_max <= capacity) | |
| return; | |
| printk(KERN_INFO "%s: Host Protected Area detected.\n" | |
| "\tcurrent capacity is %llu sectors (%llu MB)\n" | |
| "\tnative capacity is %llu sectors (%llu MB)\n", | |
| drive->name, | |
| capacity, sectors_to_MB(capacity), | |
| set_max, sectors_to_MB(set_max)); | |
| if (lba48) | |
| set_max = idedisk_set_max_address_ext(drive, set_max); | |
| else | |
| set_max = idedisk_set_max_address(drive, set_max); | |
| if (set_max) { | |
| drive->capacity64 = set_max; | |
| printk(KERN_INFO "%s: Host Protected Area disabled.\n", | |
| drive->name); | |
| } | |
| } | |
| /* | |
| * Compute drive->capacity, the full capacity of the drive | |
| * Called with drive->id != NULL. | |
| * | |
| * To compute capacity, this uses either of | |
| * | |
| * 1. CHS value set by user (whatever user sets will be trusted) | |
| * 2. LBA value from target drive (require new ATA feature) | |
| * 3. LBA value from system BIOS (new one is OK, old one may break) | |
| * 4. CHS value from system BIOS (traditional style) | |
| * | |
| * in above order (i.e., if value of higher priority is available, | |
| * reset will be ignored). | |
| */ | |
| static void init_idedisk_capacity (ide_drive_t *drive) | |
| { | |
| struct hd_driveid *id = drive->id; | |
| /* | |
| * If this drive supports the Host Protected Area feature set, | |
| * then we may need to change our opinion about the drive's capacity. | |
| */ | |
| int hpa = idedisk_supports_hpa(id); | |
| if (idedisk_supports_lba48(id)) { | |
| /* drive speaks 48-bit LBA */ | |
| drive->select.b.lba = 1; | |
| drive->capacity64 = id->lba_capacity_2; | |
| if (hpa) | |
| idedisk_check_hpa(drive); | |
| } else if ((id->capability & 2) && lba_capacity_is_ok(id)) { | |
| /* drive speaks 28-bit LBA */ | |
| drive->select.b.lba = 1; | |
| drive->capacity64 = id->lba_capacity; | |
| if (hpa) | |
| idedisk_check_hpa(drive); | |
| } else { | |
| /* drive speaks boring old 28-bit CHS */ | |
| drive->capacity64 = drive->cyl * drive->head * drive->sect; | |
| } | |
| } | |
| static sector_t idedisk_capacity (ide_drive_t *drive) | |
| { | |
| return drive->capacity64 - drive->sect0; | |
| } | |
| #ifdef CONFIG_PROC_FS | |
| static int smart_enable(ide_drive_t *drive) | |
| { | |
| ide_task_t args; | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| args.tfRegister[IDE_FEATURE_OFFSET] = SMART_ENABLE; | |
| args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS; | |
| args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS; | |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART; | |
| args.command_type = IDE_DRIVE_TASK_NO_DATA; | |
| args.handler = &task_no_data_intr; | |
| return ide_raw_taskfile(drive, &args, NULL); | |
| } | |
| static int get_smart_values(ide_drive_t *drive, u8 *buf) | |
| { | |
| ide_task_t args; | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| args.tfRegister[IDE_FEATURE_OFFSET] = SMART_READ_VALUES; | |
| args.tfRegister[IDE_NSECTOR_OFFSET] = 0x01; | |
| args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS; | |
| args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS; | |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART; | |
| args.command_type = IDE_DRIVE_TASK_IN; | |
| args.data_phase = TASKFILE_IN; | |
| args.handler = &task_in_intr; | |
| (void) smart_enable(drive); | |
| return ide_raw_taskfile(drive, &args, buf); | |
| } | |
| static int get_smart_thresholds(ide_drive_t *drive, u8 *buf) | |
| { | |
| ide_task_t args; | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| args.tfRegister[IDE_FEATURE_OFFSET] = SMART_READ_THRESHOLDS; | |
| args.tfRegister[IDE_NSECTOR_OFFSET] = 0x01; | |
| args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS; | |
| args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS; | |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART; | |
| args.command_type = IDE_DRIVE_TASK_IN; | |
| args.data_phase = TASKFILE_IN; | |
| args.handler = &task_in_intr; | |
| (void) smart_enable(drive); | |
| return ide_raw_taskfile(drive, &args, buf); | |
| } | |
| static int proc_idedisk_read_cache | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *) data; | |
| char *out = page; | |
| int len; | |
| if (drive->id_read) | |
| len = sprintf(out,"%i\n", drive->id->buf_size / 2); | |
| else | |
| len = sprintf(out,"(none)\n"); | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| static int proc_idedisk_read_capacity | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| ide_drive_t*drive = (ide_drive_t *)data; | |
| int len; | |
| len = sprintf(page,"%llu\n", (long long)idedisk_capacity(drive)); | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| static int proc_idedisk_read_smart_thresholds | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *)data; | |
| int len = 0, i = 0; | |
| if (!get_smart_thresholds(drive, page)) { | |
| unsigned short *val = (unsigned short *) page; | |
| char *out = ((char *)val) + (SECTOR_WORDS * 4); | |
| page = out; | |
| do { | |
| out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); | |
| val += 1; | |
| } while (i < (SECTOR_WORDS * 2)); | |
| len = out - page; | |
| } | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| static int proc_idedisk_read_smart_values | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *)data; | |
| int len = 0, i = 0; | |
| if (!get_smart_values(drive, page)) { | |
| unsigned short *val = (unsigned short *) page; | |
| char *out = ((char *)val) + (SECTOR_WORDS * 4); | |
| page = out; | |
| do { | |
| out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); | |
| val += 1; | |
| } while (i < (SECTOR_WORDS * 2)); | |
| len = out - page; | |
| } | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| static ide_proc_entry_t idedisk_proc[] = { | |
| { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL }, | |
| { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL }, | |
| { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, | |
| { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_smart_values, NULL }, | |
| { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_smart_thresholds, NULL }, | |
| { NULL, 0, NULL, NULL } | |
| }; | |
| #else | |
| #define idedisk_proc NULL | |
| #endif /* CONFIG_PROC_FS */ | |
| static void idedisk_prepare_flush(request_queue_t *q, struct request *rq) | |
| { | |
| ide_drive_t *drive = q->queuedata; | |
| memset(rq->cmd, 0, sizeof(rq->cmd)); | |
| if (ide_id_has_flush_cache_ext(drive->id) && | |
| (drive->capacity64 >= (1UL << 28))) | |
| rq->cmd[0] = WIN_FLUSH_CACHE_EXT; | |
| else | |
| rq->cmd[0] = WIN_FLUSH_CACHE; | |
| rq->flags |= REQ_DRIVE_TASK; | |
| rq->buffer = rq->cmd; | |
| } | |
| static int idedisk_issue_flush(request_queue_t *q, struct gendisk *disk, | |
| sector_t *error_sector) | |
| { | |
| ide_drive_t *drive = q->queuedata; | |
| struct request *rq; | |
| int ret; | |
| if (!drive->wcache) | |
| return 0; | |
| rq = blk_get_request(q, WRITE, __GFP_WAIT); | |
| idedisk_prepare_flush(q, rq); | |
| ret = blk_execute_rq(q, disk, rq, 0); | |
| /* | |
| * if we failed and caller wants error offset, get it | |
| */ | |
| if (ret && error_sector) | |
| *error_sector = ide_get_error_location(drive, rq->cmd); | |
| blk_put_request(rq); | |
| return ret; | |
| } | |
| /* | |
| * This is tightly woven into the driver->do_special can not touch. | |
| * DON'T do it again until a total personality rewrite is committed. | |
| */ | |
| static int set_multcount(ide_drive_t *drive, int arg) | |
| { | |
| struct request rq; | |
| if (drive->special.b.set_multmode) | |
| return -EBUSY; | |
| ide_init_drive_cmd (&rq); | |
| rq.flags = REQ_DRIVE_CMD; | |
| drive->mult_req = arg; | |
| drive->special.b.set_multmode = 1; | |
| (void) ide_do_drive_cmd (drive, &rq, ide_wait); | |
| return (drive->mult_count == arg) ? 0 : -EIO; | |
| } | |
| static int set_nowerr(ide_drive_t *drive, int arg) | |
| { | |
| if (ide_spin_wait_hwgroup(drive)) | |
| return -EBUSY; | |
| drive->nowerr = arg; | |
| drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT; | |
| spin_unlock_irq(&ide_lock); | |
| return 0; | |
| } | |
| static void update_ordered(ide_drive_t *drive) | |
| { | |
| struct hd_driveid *id = drive->id; | |
| unsigned ordered = QUEUE_ORDERED_NONE; | |
| prepare_flush_fn *prep_fn = NULL; | |
| issue_flush_fn *issue_fn = NULL; | |
| if (drive->wcache) { | |
| unsigned long long capacity; | |
| int barrier; | |
| /* | |
| * We must avoid issuing commands a drive does not | |
| * understand or we may crash it. We check flush cache | |
| * is supported. We also check we have the LBA48 flush | |
| * cache if the drive capacity is too large. By this | |
| * time we have trimmed the drive capacity if LBA48 is | |
| * not available so we don't need to recheck that. | |
| */ | |
| capacity = idedisk_capacity(drive); | |
| barrier = ide_id_has_flush_cache(id) && !drive->noflush && | |
| (drive->addressing == 0 || capacity <= (1ULL << 28) || | |
| ide_id_has_flush_cache_ext(id)); | |
| printk(KERN_INFO "%s: cache flushes %ssupported\n", | |
| drive->name, barrier ? "" : "not "); | |
| if (barrier) { | |
| ordered = QUEUE_ORDERED_DRAIN_FLUSH; | |
| prep_fn = idedisk_prepare_flush; | |
| issue_fn = idedisk_issue_flush; | |
| } | |
| } else | |
| ordered = QUEUE_ORDERED_DRAIN; | |
| blk_queue_ordered(drive->queue, ordered, prep_fn); | |
| blk_queue_issue_flush_fn(drive->queue, issue_fn); | |
| } | |
| static int write_cache(ide_drive_t *drive, int arg) | |
| { | |
| ide_task_t args; | |
| int err = 1; | |
| if (ide_id_has_flush_cache(drive->id)) { | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ? | |
| SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE; | |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SETFEATURES; | |
| args.command_type = IDE_DRIVE_TASK_NO_DATA; | |
| args.handler = &task_no_data_intr; | |
| err = ide_raw_taskfile(drive, &args, NULL); | |
| if (err == 0) | |
| drive->wcache = arg; | |
| } | |
| update_ordered(drive); | |
| return err; | |
| } | |
| static int do_idedisk_flushcache (ide_drive_t *drive) | |
| { | |
| ide_task_t args; | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| if (ide_id_has_flush_cache_ext(drive->id)) | |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_FLUSH_CACHE_EXT; | |
| else | |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_FLUSH_CACHE; | |
| args.command_type = IDE_DRIVE_TASK_NO_DATA; | |
| args.handler = &task_no_data_intr; | |
| return ide_raw_taskfile(drive, &args, NULL); | |
| } | |
| static int set_acoustic (ide_drive_t *drive, int arg) | |
| { | |
| ide_task_t args; | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ? SETFEATURES_EN_AAM : | |
| SETFEATURES_DIS_AAM; | |
| args.tfRegister[IDE_NSECTOR_OFFSET] = arg; | |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SETFEATURES; | |
| args.command_type = IDE_DRIVE_TASK_NO_DATA; | |
| args.handler = &task_no_data_intr; | |
| ide_raw_taskfile(drive, &args, NULL); | |
| drive->acoustic = arg; | |
| return 0; | |
| } | |
| /* | |
| * drive->addressing: | |
| * 0: 28-bit | |
| * 1: 48-bit | |
| * 2: 48-bit capable doing 28-bit | |
| */ | |
| static int set_lba_addressing(ide_drive_t *drive, int arg) | |
| { | |
| drive->addressing = 0; | |
| if (HWIF(drive)->no_lba48) | |
| return 0; | |
| if (!idedisk_supports_lba48(drive->id)) | |
| return -EIO; | |
| drive->addressing = arg; | |
| return 0; | |
| } | |
| static void idedisk_add_settings(ide_drive_t *drive) | |
| { | |
| struct hd_driveid *id = drive->id; | |
| ide_add_setting(drive, "bios_cyl", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->bios_cyl, NULL); | |
| ide_add_setting(drive, "bios_head", SETTING_RW, -1, -1, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); | |
| ide_add_setting(drive, "bios_sect", SETTING_RW, -1, -1, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); | |
| ide_add_setting(drive, "address", SETTING_RW, HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, TYPE_INTA, 0, 2, 1, 1, &drive->addressing, set_lba_addressing); | |
| ide_add_setting(drive, "bswap", SETTING_READ, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->bswap, NULL); | |
| ide_add_setting(drive, "multcount", id ? SETTING_RW : SETTING_READ, HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, TYPE_BYTE, 0, id ? id->max_multsect : 0, 1, 1, &drive->mult_count, set_multcount); | |
| ide_add_setting(drive, "nowerr", SETTING_RW, HDIO_GET_NOWERR, HDIO_SET_NOWERR, TYPE_BYTE, 0, 1, 1, 1, &drive->nowerr, set_nowerr); | |
| ide_add_setting(drive, "lun", SETTING_RW, -1, -1, TYPE_INT, 0, 7, 1, 1, &drive->lun, NULL); | |
| ide_add_setting(drive, "wcache", SETTING_RW, HDIO_GET_WCACHE, HDIO_SET_WCACHE, TYPE_BYTE, 0, 1, 1, 1, &drive->wcache, write_cache); | |
| ide_add_setting(drive, "acoustic", SETTING_RW, HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, TYPE_BYTE, 0, 254, 1, 1, &drive->acoustic, set_acoustic); | |
| ide_add_setting(drive, "failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->failures, NULL); | |
| ide_add_setting(drive, "max_failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->max_failures, NULL); | |
| } | |
| static void idedisk_setup (ide_drive_t *drive) | |
| { | |
| struct hd_driveid *id = drive->id; | |
| unsigned long long capacity; | |
| idedisk_add_settings(drive); | |
| if (drive->id_read == 0) | |
| return; | |
| if (drive->removable) { | |
| /* | |
| * Removable disks (eg. SYQUEST); ignore 'WD' drives | |
| */ | |
| if (id->model[0] != 'W' || id->model[1] != 'D') { | |
| drive->doorlocking = 1; | |
| } | |
| } | |
| (void)set_lba_addressing(drive, 1); | |
| if (drive->addressing == 1) { | |
| ide_hwif_t *hwif = HWIF(drive); | |
| int max_s = 2048; | |
| if (max_s > hwif->rqsize) | |
| max_s = hwif->rqsize; | |
| blk_queue_max_sectors(drive->queue, max_s); | |
| } | |
| printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, drive->queue->max_sectors / 2); | |
| /* calculate drive capacity, and select LBA if possible */ | |
| init_idedisk_capacity (drive); | |
| /* limit drive capacity to 137GB if LBA48 cannot be used */ | |
| if (drive->addressing == 0 && drive->capacity64 > 1ULL << 28) { | |
| printk(KERN_WARNING "%s: cannot use LBA48 - full capacity " | |
| "%llu sectors (%llu MB)\n", | |
| drive->name, (unsigned long long)drive->capacity64, | |
| sectors_to_MB(drive->capacity64)); | |
| drive->capacity64 = 1ULL << 28; | |
| } | |
| if (drive->hwif->no_lba48_dma && drive->addressing) { | |
| if (drive->capacity64 > 1ULL << 28) { | |
| printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode will" | |
| " be used for accessing sectors > %u\n", | |
| drive->name, 1 << 28); | |
| } else | |
| drive->addressing = 0; | |
| } | |
| /* | |
| * if possible, give fdisk access to more of the drive, | |
| * by correcting bios_cyls: | |
| */ | |
| capacity = idedisk_capacity (drive); | |
| if (!drive->forced_geom) { | |
| if (idedisk_supports_lba48(drive->id)) { | |
| /* compatibility */ | |
| drive->bios_sect = 63; | |
| drive->bios_head = 255; | |
| } | |
| if (drive->bios_sect && drive->bios_head) { | |
| unsigned int cap0 = capacity; /* truncate to 32 bits */ | |
| unsigned int cylsz, cyl; | |
| if (cap0 != capacity) | |
| drive->bios_cyl = 65535; | |
| else { | |
| cylsz = drive->bios_sect * drive->bios_head; | |
| cyl = cap0 / cylsz; | |
| if (cyl > 65535) | |
| cyl = 65535; | |
| if (cyl > drive->bios_cyl) | |
| drive->bios_cyl = cyl; | |
| } | |
| } | |
| } | |
| printk(KERN_INFO "%s: %llu sectors (%llu MB)", | |
| drive->name, capacity, sectors_to_MB(capacity)); | |
| /* Only print cache size when it was specified */ | |
| if (id->buf_size) | |
| printk (" w/%dKiB Cache", id->buf_size/2); | |
| printk(", CHS=%d/%d/%d", | |
| drive->bios_cyl, drive->bios_head, drive->bios_sect); | |
| if (drive->using_dma) | |
| ide_dma_verbose(drive); | |
| printk("\n"); | |
| /* write cache enabled? */ | |
| if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5))) | |
| drive->wcache = 1; | |
| write_cache(drive, 1); | |
| } | |
| static void ide_cacheflush_p(ide_drive_t *drive) | |
| { | |
| if (!drive->wcache || !ide_id_has_flush_cache(drive->id)) | |
| return; | |
| if (do_idedisk_flushcache(drive)) | |
| printk(KERN_INFO "%s: wcache flush failed!\n", drive->name); | |
| } | |
| static void ide_disk_remove(ide_drive_t *drive) | |
| { | |
| struct ide_disk_obj *idkp = drive->driver_data; | |
| struct gendisk *g = idkp->disk; | |
| ide_unregister_subdriver(drive, idkp->driver); | |
| del_gendisk(g); | |
| ide_cacheflush_p(drive); | |
| ide_disk_put(idkp); | |
| } | |
| static void ide_disk_release(struct kref *kref) | |
| { | |
| struct ide_disk_obj *idkp = to_ide_disk(kref); | |
| ide_drive_t *drive = idkp->drive; | |
| struct gendisk *g = idkp->disk; | |
| drive->driver_data = NULL; | |
| g->private_data = NULL; | |
| put_disk(g); | |
| kfree(idkp); | |
| } | |
| static int ide_disk_probe(ide_drive_t *drive); | |
| static void ide_device_shutdown(ide_drive_t *drive) | |
| { | |
| #ifdef CONFIG_ALPHA | |
| /* On Alpha, halt(8) doesn't actually turn the machine off, | |
| it puts you into the sort of firmware monitor. Typically, | |
| it's used to boot another kernel image, so it's not much | |
| different from reboot(8). Therefore, we don't need to | |
| spin down the disk in this case, especially since Alpha | |
| firmware doesn't handle disks in standby mode properly. | |
| On the other hand, it's reasonably safe to turn the power | |
| off when the shutdown process reaches the firmware prompt, | |
| as the firmware initialization takes rather long time - | |
| at least 10 seconds, which should be sufficient for | |
| the disk to expire its write cache. */ | |
| if (system_state != SYSTEM_POWER_OFF) { | |
| #else | |
| if (system_state == SYSTEM_RESTART) { | |
| #endif | |
| ide_cacheflush_p(drive); | |
| return; | |
| } | |
| printk("Shutdown: %s\n", drive->name); | |
| drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND); | |
| } | |
| static ide_driver_t idedisk_driver = { | |
| .gen_driver = { | |
| .owner = THIS_MODULE, | |
| .name = "ide-disk", | |
| .bus = &ide_bus_type, | |
| }, | |
| .probe = ide_disk_probe, | |
| .remove = ide_disk_remove, | |
| .shutdown = ide_device_shutdown, | |
| .version = IDEDISK_VERSION, | |
| .media = ide_disk, | |
| .supports_dsc_overlap = 0, | |
| .do_request = ide_do_rw_disk, | |
| .end_request = ide_end_request, | |
| .error = __ide_error, | |
| .abort = __ide_abort, | |
| .proc = idedisk_proc, | |
| }; | |
| static int idedisk_open(struct inode *inode, struct file *filp) | |
| { | |
| struct gendisk *disk = inode->i_bdev->bd_disk; | |
| struct ide_disk_obj *idkp; | |
| ide_drive_t *drive; | |
| if (!(idkp = ide_disk_get(disk))) | |
| return -ENXIO; | |
| drive = idkp->drive; | |
| drive->usage++; | |
| if (drive->removable && drive->usage == 1) { | |
| ide_task_t args; | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORLOCK; | |
| args.command_type = IDE_DRIVE_TASK_NO_DATA; | |
| args.handler = &task_no_data_intr; | |
| check_disk_change(inode->i_bdev); | |
| /* | |
| * Ignore the return code from door_lock, | |
| * since the open() has already succeeded, | |
| * and the door_lock is irrelevant at this point. | |
| */ | |
| if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL)) | |
| drive->doorlocking = 0; | |
| } | |
| return 0; | |
| } | |
| static int idedisk_release(struct inode *inode, struct file *filp) | |
| { | |
| struct gendisk *disk = inode->i_bdev->bd_disk; | |
| struct ide_disk_obj *idkp = ide_disk_g(disk); | |
| ide_drive_t *drive = idkp->drive; | |
| if (drive->usage == 1) | |
| ide_cacheflush_p(drive); | |
| if (drive->removable && drive->usage == 1) { | |
| ide_task_t args; | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORUNLOCK; | |
| args.command_type = IDE_DRIVE_TASK_NO_DATA; | |
| args.handler = &task_no_data_intr; | |
| if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL)) | |
| drive->doorlocking = 0; | |
| } | |
| drive->usage--; | |
| ide_disk_put(idkp); | |
| return 0; | |
| } | |
| static int idedisk_getgeo(struct block_device *bdev, struct hd_geometry *geo) | |
| { | |
| struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk); | |
| ide_drive_t *drive = idkp->drive; | |
| geo->heads = drive->bios_head; | |
| geo->sectors = drive->bios_sect; | |
| geo->cylinders = (u16)drive->bios_cyl; /* truncate */ | |
| return 0; | |
| } | |
| static int idedisk_ioctl(struct inode *inode, struct file *file, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| struct block_device *bdev = inode->i_bdev; | |
| struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk); | |
| return generic_ide_ioctl(idkp->drive, file, bdev, cmd, arg); | |
| } | |
| static int idedisk_media_changed(struct gendisk *disk) | |
| { | |
| struct ide_disk_obj *idkp = ide_disk_g(disk); | |
| ide_drive_t *drive = idkp->drive; | |
| /* do not scan partitions twice if this is a removable device */ | |
| if (drive->attach) { | |
| drive->attach = 0; | |
| return 0; | |
| } | |
| /* if removable, always assume it was changed */ | |
| return drive->removable; | |
| } | |
| static int idedisk_revalidate_disk(struct gendisk *disk) | |
| { | |
| struct ide_disk_obj *idkp = ide_disk_g(disk); | |
| set_capacity(disk, idedisk_capacity(idkp->drive)); | |
| return 0; | |
| } | |
| static struct block_device_operations idedisk_ops = { | |
| .owner = THIS_MODULE, | |
| .open = idedisk_open, | |
| .release = idedisk_release, | |
| .ioctl = idedisk_ioctl, | |
| .getgeo = idedisk_getgeo, | |
| .media_changed = idedisk_media_changed, | |
| .revalidate_disk= idedisk_revalidate_disk | |
| }; | |
| MODULE_DESCRIPTION("ATA DISK Driver"); | |
| static int ide_disk_probe(ide_drive_t *drive) | |
| { | |
| struct ide_disk_obj *idkp; | |
| struct gendisk *g; | |
| /* strstr("foo", "") is non-NULL */ | |
| if (!strstr("ide-disk", drive->driver_req)) | |
| goto failed; | |
| if (!drive->present) | |
| goto failed; | |
| if (drive->media != ide_disk) | |
| goto failed; | |
| idkp = kzalloc(sizeof(*idkp), GFP_KERNEL); | |
| if (!idkp) | |
| goto failed; | |
| g = alloc_disk_node(1 << PARTN_BITS, | |
| hwif_to_node(drive->hwif)); | |
| if (!g) | |
| goto out_free_idkp; | |
| ide_init_disk(g, drive); | |
| ide_register_subdriver(drive, &idedisk_driver); | |
| kref_init(&idkp->kref); | |
| idkp->drive = drive; | |
| idkp->driver = &idedisk_driver; | |
| idkp->disk = g; | |
| g->private_data = &idkp->driver; | |
| drive->driver_data = idkp; | |
| idedisk_setup(drive); | |
| if ((!drive->head || drive->head > 16) && !drive->select.b.lba) { | |
| printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n", | |
| drive->name, drive->head); | |
| drive->attach = 0; | |
| } else | |
| drive->attach = 1; | |
| g->minors = 1 << PARTN_BITS; | |
| g->driverfs_dev = &drive->gendev; | |
| g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0; | |
| set_capacity(g, idedisk_capacity(drive)); | |
| g->fops = &idedisk_ops; | |
| add_disk(g); | |
| return 0; | |
| out_free_idkp: | |
| kfree(idkp); | |
| failed: | |
| return -ENODEV; | |
| } | |
| static void __exit idedisk_exit (void) | |
| { | |
| driver_unregister(&idedisk_driver.gen_driver); | |
| } | |
| static int __init idedisk_init(void) | |
| { | |
| return driver_register(&idedisk_driver.gen_driver); | |
| } | |
| MODULE_ALIAS("ide:*m-disk*"); | |
| module_init(idedisk_init); | |
| module_exit(idedisk_exit); | |
| MODULE_LICENSE("GPL"); |