| /* | |
| * Block device elevator/IO-scheduler. | |
| * | |
| * Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE | |
| * | |
| * 30042000 Jens Axboe <axboe@suse.de> : | |
| * | |
| * Split the elevator a bit so that it is possible to choose a different | |
| * one or even write a new "plug in". There are three pieces: | |
| * - elevator_fn, inserts a new request in the queue list | |
| * - elevator_merge_fn, decides whether a new buffer can be merged with | |
| * an existing request | |
| * - elevator_dequeue_fn, called when a request is taken off the active list | |
| * | |
| * 20082000 Dave Jones <davej@suse.de> : | |
| * Removed tests for max-bomb-segments, which was breaking elvtune | |
| * when run without -bN | |
| * | |
| * Jens: | |
| * - Rework again to work with bio instead of buffer_heads | |
| * - loose bi_dev comparisons, partition handling is right now | |
| * - completely modularize elevator setup and teardown | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/fs.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/elevator.h> | |
| #include <linux/bio.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/init.h> | |
| #include <linux/compiler.h> | |
| #include <linux/delay.h> | |
| #include <linux/blktrace_api.h> | |
| #include <asm/uaccess.h> | |
| static DEFINE_SPINLOCK(elv_list_lock); | |
| static LIST_HEAD(elv_list); | |
| /* | |
| * can we safely merge with this request? | |
| */ | |
| inline int elv_rq_merge_ok(struct request *rq, struct bio *bio) | |
| { | |
| if (!rq_mergeable(rq)) | |
| return 0; | |
| /* | |
| * different data direction or already started, don't merge | |
| */ | |
| if (bio_data_dir(bio) != rq_data_dir(rq)) | |
| return 0; | |
| /* | |
| * same device and no special stuff set, merge is ok | |
| */ | |
| if (rq->rq_disk == bio->bi_bdev->bd_disk && | |
| !rq->waiting && !rq->special) | |
| return 1; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(elv_rq_merge_ok); | |
| static inline int elv_try_merge(struct request *__rq, struct bio *bio) | |
| { | |
| int ret = ELEVATOR_NO_MERGE; | |
| /* | |
| * we can merge and sequence is ok, check if it's possible | |
| */ | |
| if (elv_rq_merge_ok(__rq, bio)) { | |
| if (__rq->sector + __rq->nr_sectors == bio->bi_sector) | |
| ret = ELEVATOR_BACK_MERGE; | |
| else if (__rq->sector - bio_sectors(bio) == bio->bi_sector) | |
| ret = ELEVATOR_FRONT_MERGE; | |
| } | |
| return ret; | |
| } | |
| static struct elevator_type *elevator_find(const char *name) | |
| { | |
| struct elevator_type *e = NULL; | |
| struct list_head *entry; | |
| list_for_each(entry, &elv_list) { | |
| struct elevator_type *__e; | |
| __e = list_entry(entry, struct elevator_type, list); | |
| if (!strcmp(__e->elevator_name, name)) { | |
| e = __e; | |
| break; | |
| } | |
| } | |
| return e; | |
| } | |
| static void elevator_put(struct elevator_type *e) | |
| { | |
| module_put(e->elevator_owner); | |
| } | |
| static struct elevator_type *elevator_get(const char *name) | |
| { | |
| struct elevator_type *e; | |
| spin_lock_irq(&elv_list_lock); | |
| e = elevator_find(name); | |
| if (e && !try_module_get(e->elevator_owner)) | |
| e = NULL; | |
| spin_unlock_irq(&elv_list_lock); | |
| return e; | |
| } | |
| static void *elevator_init_queue(request_queue_t *q, struct elevator_queue *eq) | |
| { | |
| return eq->ops->elevator_init_fn(q, eq); | |
| } | |
| static void elevator_attach(request_queue_t *q, struct elevator_queue *eq, | |
| void *data) | |
| { | |
| q->elevator = eq; | |
| eq->elevator_data = data; | |
| } | |
| static char chosen_elevator[16]; | |
| static int __init elevator_setup(char *str) | |
| { | |
| /* | |
| * Be backwards-compatible with previous kernels, so users | |
| * won't get the wrong elevator. | |
| */ | |
| if (!strcmp(str, "as")) | |
| strcpy(chosen_elevator, "anticipatory"); | |
| else | |
| strncpy(chosen_elevator, str, sizeof(chosen_elevator) - 1); | |
| return 1; | |
| } | |
| __setup("elevator=", elevator_setup); | |
| static struct kobj_type elv_ktype; | |
| static elevator_t *elevator_alloc(struct elevator_type *e) | |
| { | |
| elevator_t *eq = kmalloc(sizeof(elevator_t), GFP_KERNEL); | |
| if (eq) { | |
| memset(eq, 0, sizeof(*eq)); | |
| eq->ops = &e->ops; | |
| eq->elevator_type = e; | |
| kobject_init(&eq->kobj); | |
| snprintf(eq->kobj.name, KOBJ_NAME_LEN, "%s", "iosched"); | |
| eq->kobj.ktype = &elv_ktype; | |
| mutex_init(&eq->sysfs_lock); | |
| } else { | |
| elevator_put(e); | |
| } | |
| return eq; | |
| } | |
| static void elevator_release(struct kobject *kobj) | |
| { | |
| elevator_t *e = container_of(kobj, elevator_t, kobj); | |
| elevator_put(e->elevator_type); | |
| kfree(e); | |
| } | |
| int elevator_init(request_queue_t *q, char *name) | |
| { | |
| struct elevator_type *e = NULL; | |
| struct elevator_queue *eq; | |
| int ret = 0; | |
| void *data; | |
| INIT_LIST_HEAD(&q->queue_head); | |
| q->last_merge = NULL; | |
| q->end_sector = 0; | |
| q->boundary_rq = NULL; | |
| if (name && !(e = elevator_get(name))) | |
| return -EINVAL; | |
| if (!e && *chosen_elevator && !(e = elevator_get(chosen_elevator))) | |
| printk("I/O scheduler %s not found\n", chosen_elevator); | |
| if (!e && !(e = elevator_get(CONFIG_DEFAULT_IOSCHED))) { | |
| printk("Default I/O scheduler not found, using no-op\n"); | |
| e = elevator_get("noop"); | |
| } | |
| eq = elevator_alloc(e); | |
| if (!eq) | |
| return -ENOMEM; | |
| data = elevator_init_queue(q, eq); | |
| if (!data) { | |
| kobject_put(&eq->kobj); | |
| return -ENOMEM; | |
| } | |
| elevator_attach(q, eq, data); | |
| return ret; | |
| } | |
| void elevator_exit(elevator_t *e) | |
| { | |
| mutex_lock(&e->sysfs_lock); | |
| if (e->ops->elevator_exit_fn) | |
| e->ops->elevator_exit_fn(e); | |
| e->ops = NULL; | |
| mutex_unlock(&e->sysfs_lock); | |
| kobject_put(&e->kobj); | |
| } | |
| /* | |
| * Insert rq into dispatch queue of q. Queue lock must be held on | |
| * entry. If sort != 0, rq is sort-inserted; otherwise, rq will be | |
| * appended to the dispatch queue. To be used by specific elevators. | |
| */ | |
| void elv_dispatch_sort(request_queue_t *q, struct request *rq) | |
| { | |
| sector_t boundary; | |
| struct list_head *entry; | |
| if (q->last_merge == rq) | |
| q->last_merge = NULL; | |
| q->nr_sorted--; | |
| boundary = q->end_sector; | |
| list_for_each_prev(entry, &q->queue_head) { | |
| struct request *pos = list_entry_rq(entry); | |
| if (pos->flags & (REQ_SOFTBARRIER|REQ_HARDBARRIER|REQ_STARTED)) | |
| break; | |
| if (rq->sector >= boundary) { | |
| if (pos->sector < boundary) | |
| continue; | |
| } else { | |
| if (pos->sector >= boundary) | |
| break; | |
| } | |
| if (rq->sector >= pos->sector) | |
| break; | |
| } | |
| list_add(&rq->queuelist, entry); | |
| } | |
| int elv_merge(request_queue_t *q, struct request **req, struct bio *bio) | |
| { | |
| elevator_t *e = q->elevator; | |
| int ret; | |
| if (q->last_merge) { | |
| ret = elv_try_merge(q->last_merge, bio); | |
| if (ret != ELEVATOR_NO_MERGE) { | |
| *req = q->last_merge; | |
| return ret; | |
| } | |
| } | |
| if (e->ops->elevator_merge_fn) | |
| return e->ops->elevator_merge_fn(q, req, bio); | |
| return ELEVATOR_NO_MERGE; | |
| } | |
| void elv_merged_request(request_queue_t *q, struct request *rq) | |
| { | |
| elevator_t *e = q->elevator; | |
| if (e->ops->elevator_merged_fn) | |
| e->ops->elevator_merged_fn(q, rq); | |
| q->last_merge = rq; | |
| } | |
| void elv_merge_requests(request_queue_t *q, struct request *rq, | |
| struct request *next) | |
| { | |
| elevator_t *e = q->elevator; | |
| if (e->ops->elevator_merge_req_fn) | |
| e->ops->elevator_merge_req_fn(q, rq, next); | |
| q->nr_sorted--; | |
| q->last_merge = rq; | |
| } | |
| void elv_requeue_request(request_queue_t *q, struct request *rq) | |
| { | |
| elevator_t *e = q->elevator; | |
| /* | |
| * it already went through dequeue, we need to decrement the | |
| * in_flight count again | |
| */ | |
| if (blk_account_rq(rq)) { | |
| q->in_flight--; | |
| if (blk_sorted_rq(rq) && e->ops->elevator_deactivate_req_fn) | |
| e->ops->elevator_deactivate_req_fn(q, rq); | |
| } | |
| rq->flags &= ~REQ_STARTED; | |
| elv_insert(q, rq, ELEVATOR_INSERT_REQUEUE); | |
| } | |
| static void elv_drain_elevator(request_queue_t *q) | |
| { | |
| static int printed; | |
| while (q->elevator->ops->elevator_dispatch_fn(q, 1)) | |
| ; | |
| if (q->nr_sorted == 0) | |
| return; | |
| if (printed++ < 10) { | |
| printk(KERN_ERR "%s: forced dispatching is broken " | |
| "(nr_sorted=%u), please report this\n", | |
| q->elevator->elevator_type->elevator_name, q->nr_sorted); | |
| } | |
| } | |
| void elv_insert(request_queue_t *q, struct request *rq, int where) | |
| { | |
| struct list_head *pos; | |
| unsigned ordseq; | |
| int unplug_it = 1; | |
| blk_add_trace_rq(q, rq, BLK_TA_INSERT); | |
| rq->q = q; | |
| switch (where) { | |
| case ELEVATOR_INSERT_FRONT: | |
| rq->flags |= REQ_SOFTBARRIER; | |
| list_add(&rq->queuelist, &q->queue_head); | |
| break; | |
| case ELEVATOR_INSERT_BACK: | |
| rq->flags |= REQ_SOFTBARRIER; | |
| elv_drain_elevator(q); | |
| list_add_tail(&rq->queuelist, &q->queue_head); | |
| /* | |
| * We kick the queue here for the following reasons. | |
| * - The elevator might have returned NULL previously | |
| * to delay requests and returned them now. As the | |
| * queue wasn't empty before this request, ll_rw_blk | |
| * won't run the queue on return, resulting in hang. | |
| * - Usually, back inserted requests won't be merged | |
| * with anything. There's no point in delaying queue | |
| * processing. | |
| */ | |
| blk_remove_plug(q); | |
| q->request_fn(q); | |
| break; | |
| case ELEVATOR_INSERT_SORT: | |
| BUG_ON(!blk_fs_request(rq)); | |
| rq->flags |= REQ_SORTED; | |
| q->nr_sorted++; | |
| if (q->last_merge == NULL && rq_mergeable(rq)) | |
| q->last_merge = rq; | |
| /* | |
| * Some ioscheds (cfq) run q->request_fn directly, so | |
| * rq cannot be accessed after calling | |
| * elevator_add_req_fn. | |
| */ | |
| q->elevator->ops->elevator_add_req_fn(q, rq); | |
| break; | |
| case ELEVATOR_INSERT_REQUEUE: | |
| /* | |
| * If ordered flush isn't in progress, we do front | |
| * insertion; otherwise, requests should be requeued | |
| * in ordseq order. | |
| */ | |
| rq->flags |= REQ_SOFTBARRIER; | |
| if (q->ordseq == 0) { | |
| list_add(&rq->queuelist, &q->queue_head); | |
| break; | |
| } | |
| ordseq = blk_ordered_req_seq(rq); | |
| list_for_each(pos, &q->queue_head) { | |
| struct request *pos_rq = list_entry_rq(pos); | |
| if (ordseq <= blk_ordered_req_seq(pos_rq)) | |
| break; | |
| } | |
| list_add_tail(&rq->queuelist, pos); | |
| /* | |
| * most requeues happen because of a busy condition, don't | |
| * force unplug of the queue for that case. | |
| */ | |
| unplug_it = 0; | |
| break; | |
| default: | |
| printk(KERN_ERR "%s: bad insertion point %d\n", | |
| __FUNCTION__, where); | |
| BUG(); | |
| } | |
| if (unplug_it && blk_queue_plugged(q)) { | |
| int nrq = q->rq.count[READ] + q->rq.count[WRITE] | |
| - q->in_flight; | |
| if (nrq >= q->unplug_thresh) | |
| __generic_unplug_device(q); | |
| } | |
| } | |
| void __elv_add_request(request_queue_t *q, struct request *rq, int where, | |
| int plug) | |
| { | |
| if (q->ordcolor) | |
| rq->flags |= REQ_ORDERED_COLOR; | |
| if (rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) { | |
| /* | |
| * toggle ordered color | |
| */ | |
| if (blk_barrier_rq(rq)) | |
| q->ordcolor ^= 1; | |
| /* | |
| * barriers implicitly indicate back insertion | |
| */ | |
| if (where == ELEVATOR_INSERT_SORT) | |
| where = ELEVATOR_INSERT_BACK; | |
| /* | |
| * this request is scheduling boundary, update | |
| * end_sector | |
| */ | |
| if (blk_fs_request(rq)) { | |
| q->end_sector = rq_end_sector(rq); | |
| q->boundary_rq = rq; | |
| } | |
| } else if (!(rq->flags & REQ_ELVPRIV) && where == ELEVATOR_INSERT_SORT) | |
| where = ELEVATOR_INSERT_BACK; | |
| if (plug) | |
| blk_plug_device(q); | |
| elv_insert(q, rq, where); | |
| } | |
| void elv_add_request(request_queue_t *q, struct request *rq, int where, | |
| int plug) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(q->queue_lock, flags); | |
| __elv_add_request(q, rq, where, plug); | |
| spin_unlock_irqrestore(q->queue_lock, flags); | |
| } | |
| static inline struct request *__elv_next_request(request_queue_t *q) | |
| { | |
| struct request *rq; | |
| while (1) { | |
| while (!list_empty(&q->queue_head)) { | |
| rq = list_entry_rq(q->queue_head.next); | |
| if (blk_do_ordered(q, &rq)) | |
| return rq; | |
| } | |
| if (!q->elevator->ops->elevator_dispatch_fn(q, 0)) | |
| return NULL; | |
| } | |
| } | |
| struct request *elv_next_request(request_queue_t *q) | |
| { | |
| struct request *rq; | |
| int ret; | |
| while ((rq = __elv_next_request(q)) != NULL) { | |
| if (!(rq->flags & REQ_STARTED)) { | |
| elevator_t *e = q->elevator; | |
| /* | |
| * This is the first time the device driver | |
| * sees this request (possibly after | |
| * requeueing). Notify IO scheduler. | |
| */ | |
| if (blk_sorted_rq(rq) && | |
| e->ops->elevator_activate_req_fn) | |
| e->ops->elevator_activate_req_fn(q, rq); | |
| /* | |
| * just mark as started even if we don't start | |
| * it, a request that has been delayed should | |
| * not be passed by new incoming requests | |
| */ | |
| rq->flags |= REQ_STARTED; | |
| blk_add_trace_rq(q, rq, BLK_TA_ISSUE); | |
| } | |
| if (!q->boundary_rq || q->boundary_rq == rq) { | |
| q->end_sector = rq_end_sector(rq); | |
| q->boundary_rq = NULL; | |
| } | |
| if ((rq->flags & REQ_DONTPREP) || !q->prep_rq_fn) | |
| break; | |
| ret = q->prep_rq_fn(q, rq); | |
| if (ret == BLKPREP_OK) { | |
| break; | |
| } else if (ret == BLKPREP_DEFER) { | |
| /* | |
| * the request may have been (partially) prepped. | |
| * we need to keep this request in the front to | |
| * avoid resource deadlock. REQ_STARTED will | |
| * prevent other fs requests from passing this one. | |
| */ | |
| rq = NULL; | |
| break; | |
| } else if (ret == BLKPREP_KILL) { | |
| int nr_bytes = rq->hard_nr_sectors << 9; | |
| if (!nr_bytes) | |
| nr_bytes = rq->data_len; | |
| blkdev_dequeue_request(rq); | |
| rq->flags |= REQ_QUIET; | |
| end_that_request_chunk(rq, 0, nr_bytes); | |
| end_that_request_last(rq, 0); | |
| } else { | |
| printk(KERN_ERR "%s: bad return=%d\n", __FUNCTION__, | |
| ret); | |
| break; | |
| } | |
| } | |
| return rq; | |
| } | |
| void elv_dequeue_request(request_queue_t *q, struct request *rq) | |
| { | |
| BUG_ON(list_empty(&rq->queuelist)); | |
| list_del_init(&rq->queuelist); | |
| /* | |
| * the time frame between a request being removed from the lists | |
| * and to it is freed is accounted as io that is in progress at | |
| * the driver side. | |
| */ | |
| if (blk_account_rq(rq)) | |
| q->in_flight++; | |
| } | |
| int elv_queue_empty(request_queue_t *q) | |
| { | |
| elevator_t *e = q->elevator; | |
| if (!list_empty(&q->queue_head)) | |
| return 0; | |
| if (e->ops->elevator_queue_empty_fn) | |
| return e->ops->elevator_queue_empty_fn(q); | |
| return 1; | |
| } | |
| struct request *elv_latter_request(request_queue_t *q, struct request *rq) | |
| { | |
| elevator_t *e = q->elevator; | |
| if (e->ops->elevator_latter_req_fn) | |
| return e->ops->elevator_latter_req_fn(q, rq); | |
| return NULL; | |
| } | |
| struct request *elv_former_request(request_queue_t *q, struct request *rq) | |
| { | |
| elevator_t *e = q->elevator; | |
| if (e->ops->elevator_former_req_fn) | |
| return e->ops->elevator_former_req_fn(q, rq); | |
| return NULL; | |
| } | |
| int elv_set_request(request_queue_t *q, struct request *rq, struct bio *bio, | |
| gfp_t gfp_mask) | |
| { | |
| elevator_t *e = q->elevator; | |
| if (e->ops->elevator_set_req_fn) | |
| return e->ops->elevator_set_req_fn(q, rq, bio, gfp_mask); | |
| rq->elevator_private = NULL; | |
| return 0; | |
| } | |
| void elv_put_request(request_queue_t *q, struct request *rq) | |
| { | |
| elevator_t *e = q->elevator; | |
| if (e->ops->elevator_put_req_fn) | |
| e->ops->elevator_put_req_fn(q, rq); | |
| } | |
| int elv_may_queue(request_queue_t *q, int rw, struct bio *bio) | |
| { | |
| elevator_t *e = q->elevator; | |
| if (e->ops->elevator_may_queue_fn) | |
| return e->ops->elevator_may_queue_fn(q, rw, bio); | |
| return ELV_MQUEUE_MAY; | |
| } | |
| void elv_completed_request(request_queue_t *q, struct request *rq) | |
| { | |
| elevator_t *e = q->elevator; | |
| /* | |
| * request is released from the driver, io must be done | |
| */ | |
| if (blk_account_rq(rq)) { | |
| q->in_flight--; | |
| if (blk_sorted_rq(rq) && e->ops->elevator_completed_req_fn) | |
| e->ops->elevator_completed_req_fn(q, rq); | |
| } | |
| /* | |
| * Check if the queue is waiting for fs requests to be | |
| * drained for flush sequence. | |
| */ | |
| if (unlikely(q->ordseq)) { | |
| struct request *first_rq = list_entry_rq(q->queue_head.next); | |
| if (q->in_flight == 0 && | |
| blk_ordered_cur_seq(q) == QUEUE_ORDSEQ_DRAIN && | |
| blk_ordered_req_seq(first_rq) > QUEUE_ORDSEQ_DRAIN) { | |
| blk_ordered_complete_seq(q, QUEUE_ORDSEQ_DRAIN, 0); | |
| q->request_fn(q); | |
| } | |
| } | |
| } | |
| #define to_elv(atr) container_of((atr), struct elv_fs_entry, attr) | |
| static ssize_t | |
| elv_attr_show(struct kobject *kobj, struct attribute *attr, char *page) | |
| { | |
| elevator_t *e = container_of(kobj, elevator_t, kobj); | |
| struct elv_fs_entry *entry = to_elv(attr); | |
| ssize_t error; | |
| if (!entry->show) | |
| return -EIO; | |
| mutex_lock(&e->sysfs_lock); | |
| error = e->ops ? entry->show(e, page) : -ENOENT; | |
| mutex_unlock(&e->sysfs_lock); | |
| return error; | |
| } | |
| static ssize_t | |
| elv_attr_store(struct kobject *kobj, struct attribute *attr, | |
| const char *page, size_t length) | |
| { | |
| elevator_t *e = container_of(kobj, elevator_t, kobj); | |
| struct elv_fs_entry *entry = to_elv(attr); | |
| ssize_t error; | |
| if (!entry->store) | |
| return -EIO; | |
| mutex_lock(&e->sysfs_lock); | |
| error = e->ops ? entry->store(e, page, length) : -ENOENT; | |
| mutex_unlock(&e->sysfs_lock); | |
| return error; | |
| } | |
| static struct sysfs_ops elv_sysfs_ops = { | |
| .show = elv_attr_show, | |
| .store = elv_attr_store, | |
| }; | |
| static struct kobj_type elv_ktype = { | |
| .sysfs_ops = &elv_sysfs_ops, | |
| .release = elevator_release, | |
| }; | |
| int elv_register_queue(struct request_queue *q) | |
| { | |
| elevator_t *e = q->elevator; | |
| int error; | |
| e->kobj.parent = &q->kobj; | |
| error = kobject_add(&e->kobj); | |
| if (!error) { | |
| struct elv_fs_entry *attr = e->elevator_type->elevator_attrs; | |
| if (attr) { | |
| while (attr->attr.name) { | |
| if (sysfs_create_file(&e->kobj, &attr->attr)) | |
| break; | |
| attr++; | |
| } | |
| } | |
| kobject_uevent(&e->kobj, KOBJ_ADD); | |
| } | |
| return error; | |
| } | |
| static void __elv_unregister_queue(elevator_t *e) | |
| { | |
| kobject_uevent(&e->kobj, KOBJ_REMOVE); | |
| kobject_del(&e->kobj); | |
| } | |
| void elv_unregister_queue(struct request_queue *q) | |
| { | |
| if (q) | |
| __elv_unregister_queue(q->elevator); | |
| } | |
| int elv_register(struct elevator_type *e) | |
| { | |
| spin_lock_irq(&elv_list_lock); | |
| BUG_ON(elevator_find(e->elevator_name)); | |
| list_add_tail(&e->list, &elv_list); | |
| spin_unlock_irq(&elv_list_lock); | |
| printk(KERN_INFO "io scheduler %s registered", e->elevator_name); | |
| if (!strcmp(e->elevator_name, chosen_elevator) || | |
| (!*chosen_elevator && | |
| !strcmp(e->elevator_name, CONFIG_DEFAULT_IOSCHED))) | |
| printk(" (default)"); | |
| printk("\n"); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(elv_register); | |
| void elv_unregister(struct elevator_type *e) | |
| { | |
| struct task_struct *g, *p; | |
| /* | |
| * Iterate every thread in the process to remove the io contexts. | |
| */ | |
| if (e->ops.trim) { | |
| read_lock(&tasklist_lock); | |
| do_each_thread(g, p) { | |
| task_lock(p); | |
| if (p->io_context) | |
| e->ops.trim(p->io_context); | |
| task_unlock(p); | |
| } while_each_thread(g, p); | |
| read_unlock(&tasklist_lock); | |
| } | |
| spin_lock_irq(&elv_list_lock); | |
| list_del_init(&e->list); | |
| spin_unlock_irq(&elv_list_lock); | |
| } | |
| EXPORT_SYMBOL_GPL(elv_unregister); | |
| /* | |
| * switch to new_e io scheduler. be careful not to introduce deadlocks - | |
| * we don't free the old io scheduler, before we have allocated what we | |
| * need for the new one. this way we have a chance of going back to the old | |
| * one, if the new one fails init for some reason. | |
| */ | |
| static int elevator_switch(request_queue_t *q, struct elevator_type *new_e) | |
| { | |
| elevator_t *old_elevator, *e; | |
| void *data; | |
| /* | |
| * Allocate new elevator | |
| */ | |
| e = elevator_alloc(new_e); | |
| if (!e) | |
| return 0; | |
| data = elevator_init_queue(q, e); | |
| if (!data) { | |
| kobject_put(&e->kobj); | |
| return 0; | |
| } | |
| /* | |
| * Turn on BYPASS and drain all requests w/ elevator private data | |
| */ | |
| spin_lock_irq(q->queue_lock); | |
| set_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags); | |
| elv_drain_elevator(q); | |
| while (q->rq.elvpriv) { | |
| blk_remove_plug(q); | |
| q->request_fn(q); | |
| spin_unlock_irq(q->queue_lock); | |
| msleep(10); | |
| spin_lock_irq(q->queue_lock); | |
| elv_drain_elevator(q); | |
| } | |
| /* | |
| * Remember old elevator. | |
| */ | |
| old_elevator = q->elevator; | |
| /* | |
| * attach and start new elevator | |
| */ | |
| elevator_attach(q, e, data); | |
| spin_unlock_irq(q->queue_lock); | |
| __elv_unregister_queue(old_elevator); | |
| if (elv_register_queue(q)) | |
| goto fail_register; | |
| /* | |
| * finally exit old elevator and turn off BYPASS. | |
| */ | |
| elevator_exit(old_elevator); | |
| clear_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags); | |
| return 1; | |
| fail_register: | |
| /* | |
| * switch failed, exit the new io scheduler and reattach the old | |
| * one again (along with re-adding the sysfs dir) | |
| */ | |
| elevator_exit(e); | |
| q->elevator = old_elevator; | |
| elv_register_queue(q); | |
| clear_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags); | |
| return 0; | |
| } | |
| ssize_t elv_iosched_store(request_queue_t *q, const char *name, size_t count) | |
| { | |
| char elevator_name[ELV_NAME_MAX]; | |
| size_t len; | |
| struct elevator_type *e; | |
| elevator_name[sizeof(elevator_name) - 1] = '\0'; | |
| strncpy(elevator_name, name, sizeof(elevator_name) - 1); | |
| len = strlen(elevator_name); | |
| if (len && elevator_name[len - 1] == '\n') | |
| elevator_name[len - 1] = '\0'; | |
| e = elevator_get(elevator_name); | |
| if (!e) { | |
| printk(KERN_ERR "elevator: type %s not found\n", elevator_name); | |
| return -EINVAL; | |
| } | |
| if (!strcmp(elevator_name, q->elevator->elevator_type->elevator_name)) { | |
| elevator_put(e); | |
| return count; | |
| } | |
| if (!elevator_switch(q, e)) | |
| printk(KERN_ERR "elevator: switch to %s failed\n",elevator_name); | |
| return count; | |
| } | |
| ssize_t elv_iosched_show(request_queue_t *q, char *name) | |
| { | |
| elevator_t *e = q->elevator; | |
| struct elevator_type *elv = e->elevator_type; | |
| struct list_head *entry; | |
| int len = 0; | |
| spin_lock_irq(q->queue_lock); | |
| list_for_each(entry, &elv_list) { | |
| struct elevator_type *__e; | |
| __e = list_entry(entry, struct elevator_type, list); | |
| if (!strcmp(elv->elevator_name, __e->elevator_name)) | |
| len += sprintf(name+len, "[%s] ", elv->elevator_name); | |
| else | |
| len += sprintf(name+len, "%s ", __e->elevator_name); | |
| } | |
| spin_unlock_irq(q->queue_lock); | |
| len += sprintf(len+name, "\n"); | |
| return len; | |
| } | |
| EXPORT_SYMBOL(elv_dispatch_sort); | |
| EXPORT_SYMBOL(elv_add_request); | |
| EXPORT_SYMBOL(__elv_add_request); | |
| EXPORT_SYMBOL(elv_next_request); | |
| EXPORT_SYMBOL(elv_dequeue_request); | |
| EXPORT_SYMBOL(elv_queue_empty); | |
| EXPORT_SYMBOL(elevator_exit); | |
| EXPORT_SYMBOL(elevator_init); |