| /* | |
| * linux/drivers/ide/ide-proc.c Version 1.05 Mar 05, 2003 | |
| * | |
| * Copyright (C) 1997-1998 Mark Lord | |
| * Copyright (C) 2003 Red Hat <alan@redhat.com> | |
| */ | |
| /* | |
| * This is the /proc/ide/ filesystem implementation. | |
| * | |
| * Drive/Driver settings can be retrieved by reading the drive's | |
| * "settings" files. e.g. "cat /proc/ide0/hda/settings" | |
| * To write a new value "val" into a specific setting "name", use: | |
| * echo "name:val" >/proc/ide/ide0/hda/settings | |
| * | |
| * Also useful, "cat /proc/ide0/hda/[identify, smart_values, | |
| * smart_thresholds, capabilities]" will issue an IDENTIFY / | |
| * PACKET_IDENTIFY / SMART_READ_VALUES / SMART_READ_THRESHOLDS / | |
| * SENSE CAPABILITIES command to /dev/hda, and then dump out the | |
| * returned data as 256 16-bit words. The "hdparm" utility will | |
| * be updated someday soon to use this mechanism. | |
| * | |
| */ | |
| #include <linux/config.h> | |
| #include <linux/module.h> | |
| #include <asm/uaccess.h> | |
| #include <linux/errno.h> | |
| #include <linux/sched.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/stat.h> | |
| #include <linux/mm.h> | |
| #include <linux/pci.h> | |
| #include <linux/ctype.h> | |
| #include <linux/hdreg.h> | |
| #include <linux/ide.h> | |
| #include <linux/seq_file.h> | |
| #include <asm/io.h> | |
| static int proc_ide_read_imodel | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| ide_hwif_t *hwif = (ide_hwif_t *) data; | |
| int len; | |
| const char *name; | |
| /* | |
| * Neither ide_unknown nor ide_forced should be set at this point. | |
| */ | |
| switch (hwif->chipset) { | |
| case ide_generic: name = "generic"; break; | |
| case ide_pci: name = "pci"; break; | |
| case ide_cmd640: name = "cmd640"; break; | |
| case ide_dtc2278: name = "dtc2278"; break; | |
| case ide_ali14xx: name = "ali14xx"; break; | |
| case ide_qd65xx: name = "qd65xx"; break; | |
| case ide_umc8672: name = "umc8672"; break; | |
| case ide_ht6560b: name = "ht6560b"; break; | |
| case ide_rz1000: name = "rz1000"; break; | |
| case ide_trm290: name = "trm290"; break; | |
| case ide_cmd646: name = "cmd646"; break; | |
| case ide_cy82c693: name = "cy82c693"; break; | |
| case ide_4drives: name = "4drives"; break; | |
| case ide_pmac: name = "mac-io"; break; | |
| default: name = "(unknown)"; break; | |
| } | |
| len = sprintf(page, "%s\n", name); | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| static int proc_ide_read_mate | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| ide_hwif_t *hwif = (ide_hwif_t *) data; | |
| int len; | |
| if (hwif && hwif->mate && hwif->mate->present) | |
| len = sprintf(page, "%s\n", hwif->mate->name); | |
| else | |
| len = sprintf(page, "(none)\n"); | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| static int proc_ide_read_channel | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| ide_hwif_t *hwif = (ide_hwif_t *) data; | |
| int len; | |
| page[0] = hwif->channel ? '1' : '0'; | |
| page[1] = '\n'; | |
| len = 2; | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| static int proc_ide_read_identify | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *)data; | |
| int len = 0, i = 0; | |
| int err = 0; | |
| len = sprintf(page, "\n"); | |
| if (drive) { | |
| unsigned short *val = (unsigned short *) page; | |
| err = taskfile_lib_get_identify(drive, page); | |
| if (!err) { | |
| char *out = ((char *)page) + (SECTOR_WORDS * 4); | |
| page = out; | |
| do { | |
| out += sprintf(out, "%04x%c", | |
| le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); | |
| val += 1; | |
| } while (i < (SECTOR_WORDS * 2)); | |
| len = out - page; | |
| } | |
| } | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| static void proc_ide_settings_warn(void) | |
| { | |
| static int warned = 0; | |
| if (warned) | |
| return; | |
| printk(KERN_WARNING "Warning: /proc/ide/hd?/settings interface is " | |
| "obsolete, and will be removed soon!\n"); | |
| warned = 1; | |
| } | |
| static int proc_ide_read_settings | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *) data; | |
| ide_settings_t *setting = (ide_settings_t *) drive->settings; | |
| char *out = page; | |
| int len, rc, mul_factor, div_factor; | |
| proc_ide_settings_warn(); | |
| down(&ide_setting_sem); | |
| out += sprintf(out, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n"); | |
| out += sprintf(out, "----\t\t\t-----\t\t---\t\t---\t\t----\n"); | |
| while(setting) { | |
| mul_factor = setting->mul_factor; | |
| div_factor = setting->div_factor; | |
| out += sprintf(out, "%-24s", setting->name); | |
| if ((rc = ide_read_setting(drive, setting)) >= 0) | |
| out += sprintf(out, "%-16d", rc * mul_factor / div_factor); | |
| else | |
| out += sprintf(out, "%-16s", "write-only"); | |
| out += sprintf(out, "%-16d%-16d", (setting->min * mul_factor + div_factor - 1) / div_factor, setting->max * mul_factor / div_factor); | |
| if (setting->rw & SETTING_READ) | |
| out += sprintf(out, "r"); | |
| if (setting->rw & SETTING_WRITE) | |
| out += sprintf(out, "w"); | |
| out += sprintf(out, "\n"); | |
| setting = setting->next; | |
| } | |
| len = out - page; | |
| up(&ide_setting_sem); | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| #define MAX_LEN 30 | |
| static int proc_ide_write_settings(struct file *file, const char __user *buffer, | |
| unsigned long count, void *data) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *) data; | |
| char name[MAX_LEN + 1]; | |
| int for_real = 0; | |
| unsigned long n; | |
| ide_settings_t *setting; | |
| char *buf, *s; | |
| if (!capable(CAP_SYS_ADMIN)) | |
| return -EACCES; | |
| proc_ide_settings_warn(); | |
| if (count >= PAGE_SIZE) | |
| return -EINVAL; | |
| s = buf = (char *)__get_free_page(GFP_USER); | |
| if (!buf) | |
| return -ENOMEM; | |
| if (copy_from_user(buf, buffer, count)) { | |
| free_page((unsigned long)buf); | |
| return -EFAULT; | |
| } | |
| buf[count] = '\0'; | |
| /* | |
| * Skip over leading whitespace | |
| */ | |
| while (count && isspace(*s)) { | |
| --count; | |
| ++s; | |
| } | |
| /* | |
| * Do one full pass to verify all parameters, | |
| * then do another to actually write the new settings. | |
| */ | |
| do { | |
| char *p = s; | |
| n = count; | |
| while (n > 0) { | |
| unsigned val; | |
| char *q = p; | |
| while (n > 0 && *p != ':') { | |
| --n; | |
| p++; | |
| } | |
| if (*p != ':') | |
| goto parse_error; | |
| if (p - q > MAX_LEN) | |
| goto parse_error; | |
| memcpy(name, q, p - q); | |
| name[p - q] = 0; | |
| if (n > 0) { | |
| --n; | |
| p++; | |
| } else | |
| goto parse_error; | |
| val = simple_strtoul(p, &q, 10); | |
| n -= q - p; | |
| p = q; | |
| if (n > 0 && !isspace(*p)) | |
| goto parse_error; | |
| while (n > 0 && isspace(*p)) { | |
| --n; | |
| ++p; | |
| } | |
| down(&ide_setting_sem); | |
| setting = ide_find_setting_by_name(drive, name); | |
| if (!setting) | |
| { | |
| up(&ide_setting_sem); | |
| goto parse_error; | |
| } | |
| if (for_real) | |
| ide_write_setting(drive, setting, val * setting->div_factor / setting->mul_factor); | |
| up(&ide_setting_sem); | |
| } | |
| } while (!for_real++); | |
| free_page((unsigned long)buf); | |
| return count; | |
| parse_error: | |
| free_page((unsigned long)buf); | |
| printk("proc_ide_write_settings(): parse error\n"); | |
| return -EINVAL; | |
| } | |
| int proc_ide_read_capacity | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| int len = sprintf(page,"%llu\n", (long long)0x7fffffff); | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| EXPORT_SYMBOL_GPL(proc_ide_read_capacity); | |
| int proc_ide_read_geometry | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *) data; | |
| char *out = page; | |
| int len; | |
| out += sprintf(out,"physical %d/%d/%d\n", | |
| drive->cyl, drive->head, drive->sect); | |
| out += sprintf(out,"logical %d/%d/%d\n", | |
| drive->bios_cyl, drive->bios_head, drive->bios_sect); | |
| len = out - page; | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| EXPORT_SYMBOL(proc_ide_read_geometry); | |
| static int proc_ide_read_dmodel | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *) data; | |
| struct hd_driveid *id = drive->id; | |
| int len; | |
| len = sprintf(page, "%.40s\n", | |
| (id && id->model[0]) ? (char *)id->model : "(none)"); | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| static int proc_ide_read_driver | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *) data; | |
| struct device *dev = &drive->gendev; | |
| ide_driver_t *ide_drv; | |
| int len; | |
| down_read(&dev->bus->subsys.rwsem); | |
| if (dev->driver) { | |
| ide_drv = container_of(dev->driver, ide_driver_t, gen_driver); | |
| len = sprintf(page, "%s version %s\n", | |
| dev->driver->name, ide_drv->version); | |
| } else | |
| len = sprintf(page, "ide-default version 0.9.newide\n"); | |
| up_read(&dev->bus->subsys.rwsem); | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| static int ide_replace_subdriver(ide_drive_t *drive, const char *driver) | |
| { | |
| struct device *dev = &drive->gendev; | |
| int ret = 1; | |
| down_write(&dev->bus->subsys.rwsem); | |
| device_release_driver(dev); | |
| /* FIXME: device can still be in use by previous driver */ | |
| strlcpy(drive->driver_req, driver, sizeof(drive->driver_req)); | |
| device_attach(dev); | |
| drive->driver_req[0] = 0; | |
| if (dev->driver == NULL) | |
| device_attach(dev); | |
| if (dev->driver && !strcmp(dev->driver->name, driver)) | |
| ret = 0; | |
| up_write(&dev->bus->subsys.rwsem); | |
| return ret; | |
| } | |
| static int proc_ide_write_driver | |
| (struct file *file, const char __user *buffer, unsigned long count, void *data) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *) data; | |
| char name[32]; | |
| if (!capable(CAP_SYS_ADMIN)) | |
| return -EACCES; | |
| if (count > 31) | |
| count = 31; | |
| if (copy_from_user(name, buffer, count)) | |
| return -EFAULT; | |
| name[count] = '\0'; | |
| if (ide_replace_subdriver(drive, name)) | |
| return -EINVAL; | |
| return count; | |
| } | |
| static int proc_ide_read_media | |
| (char *page, char **start, off_t off, int count, int *eof, void *data) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *) data; | |
| const char *media; | |
| int len; | |
| switch (drive->media) { | |
| case ide_disk: media = "disk\n"; | |
| break; | |
| case ide_cdrom: media = "cdrom\n"; | |
| break; | |
| case ide_tape: media = "tape\n"; | |
| break; | |
| case ide_floppy:media = "floppy\n"; | |
| break; | |
| default: media = "UNKNOWN\n"; | |
| break; | |
| } | |
| strcpy(page,media); | |
| len = strlen(media); | |
| PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
| } | |
| static ide_proc_entry_t generic_drive_entries[] = { | |
| { "driver", S_IFREG|S_IRUGO, proc_ide_read_driver, proc_ide_write_driver }, | |
| { "identify", S_IFREG|S_IRUSR, proc_ide_read_identify, NULL }, | |
| { "media", S_IFREG|S_IRUGO, proc_ide_read_media, NULL }, | |
| { "model", S_IFREG|S_IRUGO, proc_ide_read_dmodel, NULL }, | |
| { "settings", S_IFREG|S_IRUSR|S_IWUSR,proc_ide_read_settings, proc_ide_write_settings }, | |
| { NULL, 0, NULL, NULL } | |
| }; | |
| void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data) | |
| { | |
| struct proc_dir_entry *ent; | |
| if (!dir || !p) | |
| return; | |
| while (p->name != NULL) { | |
| ent = create_proc_entry(p->name, p->mode, dir); | |
| if (!ent) return; | |
| ent->nlink = 1; | |
| ent->data = data; | |
| ent->read_proc = p->read_proc; | |
| ent->write_proc = p->write_proc; | |
| p++; | |
| } | |
| } | |
| void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p) | |
| { | |
| if (!dir || !p) | |
| return; | |
| while (p->name != NULL) { | |
| remove_proc_entry(p->name, dir); | |
| p++; | |
| } | |
| } | |
| static void create_proc_ide_drives(ide_hwif_t *hwif) | |
| { | |
| int d; | |
| struct proc_dir_entry *ent; | |
| struct proc_dir_entry *parent = hwif->proc; | |
| char name[64]; | |
| for (d = 0; d < MAX_DRIVES; d++) { | |
| ide_drive_t *drive = &hwif->drives[d]; | |
| if (!drive->present) | |
| continue; | |
| if (drive->proc) | |
| continue; | |
| drive->proc = proc_mkdir(drive->name, parent); | |
| if (drive->proc) | |
| ide_add_proc_entries(drive->proc, generic_drive_entries, drive); | |
| sprintf(name,"ide%d/%s", (drive->name[2]-'a')/2, drive->name); | |
| ent = proc_symlink(drive->name, proc_ide_root, name); | |
| if (!ent) return; | |
| } | |
| } | |
| static void destroy_proc_ide_device(ide_hwif_t *hwif, ide_drive_t *drive) | |
| { | |
| if (drive->proc) { | |
| ide_remove_proc_entries(drive->proc, generic_drive_entries); | |
| remove_proc_entry(drive->name, proc_ide_root); | |
| remove_proc_entry(drive->name, hwif->proc); | |
| drive->proc = NULL; | |
| } | |
| } | |
| static void destroy_proc_ide_drives(ide_hwif_t *hwif) | |
| { | |
| int d; | |
| for (d = 0; d < MAX_DRIVES; d++) { | |
| ide_drive_t *drive = &hwif->drives[d]; | |
| if (drive->proc) | |
| destroy_proc_ide_device(hwif, drive); | |
| } | |
| } | |
| static ide_proc_entry_t hwif_entries[] = { | |
| { "channel", S_IFREG|S_IRUGO, proc_ide_read_channel, NULL }, | |
| { "mate", S_IFREG|S_IRUGO, proc_ide_read_mate, NULL }, | |
| { "model", S_IFREG|S_IRUGO, proc_ide_read_imodel, NULL }, | |
| { NULL, 0, NULL, NULL } | |
| }; | |
| void create_proc_ide_interfaces(void) | |
| { | |
| int h; | |
| for (h = 0; h < MAX_HWIFS; h++) { | |
| ide_hwif_t *hwif = &ide_hwifs[h]; | |
| if (!hwif->present) | |
| continue; | |
| if (!hwif->proc) { | |
| hwif->proc = proc_mkdir(hwif->name, proc_ide_root); | |
| if (!hwif->proc) | |
| return; | |
| ide_add_proc_entries(hwif->proc, hwif_entries, hwif); | |
| } | |
| create_proc_ide_drives(hwif); | |
| } | |
| } | |
| EXPORT_SYMBOL(create_proc_ide_interfaces); | |
| #ifdef CONFIG_BLK_DEV_IDEPCI | |
| void ide_pci_create_host_proc(const char *name, get_info_t *get_info) | |
| { | |
| create_proc_info_entry(name, 0, proc_ide_root, get_info); | |
| } | |
| EXPORT_SYMBOL_GPL(ide_pci_create_host_proc); | |
| #endif | |
| void destroy_proc_ide_interface(ide_hwif_t *hwif) | |
| { | |
| if (hwif->proc) { | |
| destroy_proc_ide_drives(hwif); | |
| ide_remove_proc_entries(hwif->proc, hwif_entries); | |
| remove_proc_entry(hwif->name, proc_ide_root); | |
| hwif->proc = NULL; | |
| } | |
| } | |
| static int proc_print_driver(struct device_driver *drv, void *data) | |
| { | |
| ide_driver_t *ide_drv = container_of(drv, ide_driver_t, gen_driver); | |
| struct seq_file *s = data; | |
| seq_printf(s, "%s version %s\n", drv->name, ide_drv->version); | |
| return 0; | |
| } | |
| static int ide_drivers_show(struct seq_file *s, void *p) | |
| { | |
| bus_for_each_drv(&ide_bus_type, NULL, s, proc_print_driver); | |
| return 0; | |
| } | |
| static int ide_drivers_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, &ide_drivers_show, NULL); | |
| } | |
| static struct file_operations ide_drivers_operations = { | |
| .open = ide_drivers_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| }; | |
| void proc_ide_create(void) | |
| { | |
| struct proc_dir_entry *entry; | |
| if (!proc_ide_root) | |
| return; | |
| create_proc_ide_interfaces(); | |
| entry = create_proc_entry("drivers", 0, proc_ide_root); | |
| if (entry) | |
| entry->proc_fops = &ide_drivers_operations; | |
| } | |
| void proc_ide_destroy(void) | |
| { | |
| remove_proc_entry("drivers", proc_ide_root); | |
| remove_proc_entry("ide", NULL); | |
| } |