| /* | |
| * Driver for GE FPGA based GPIO | |
| * | |
| * Author: Martyn Welch <martyn.welch@ge.com> | |
| * | |
| * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc. | |
| * | |
| * This file is licensed under the terms of the GNU General Public License | |
| * version 2. This program is licensed "as is" without any warranty of any | |
| * kind, whether express or implied. | |
| */ | |
| /* TODO | |
| * | |
| * Configuration of output modes (totem-pole/open-drain) | |
| * Interrupt configuration - interrupts are always generated the FPGA relies on | |
| * the I/O interrupt controllers mask to stop them propergating | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/io.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of_gpio.h> | |
| #include <linux/module.h> | |
| #define GEF_GPIO_DIRECT 0x00 | |
| #define GEF_GPIO_IN 0x04 | |
| #define GEF_GPIO_OUT 0x08 | |
| #define GEF_GPIO_TRIG 0x0C | |
| #define GEF_GPIO_POLAR_A 0x10 | |
| #define GEF_GPIO_POLAR_B 0x14 | |
| #define GEF_GPIO_INT_STAT 0x18 | |
| #define GEF_GPIO_OVERRUN 0x1C | |
| #define GEF_GPIO_MODE 0x20 | |
| static void gef_gpio_set(struct gpio_chip *chip, unsigned offset, int value) | |
| { | |
| struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); | |
| unsigned int data; | |
| data = ioread32be(mmchip->regs + GEF_GPIO_OUT); | |
| if (value) | |
| data = data | BIT(offset); | |
| else | |
| data = data & ~BIT(offset); | |
| iowrite32be(data, mmchip->regs + GEF_GPIO_OUT); | |
| } | |
| static int gef_gpio_dir_in(struct gpio_chip *chip, unsigned offset) | |
| { | |
| unsigned int data; | |
| struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); | |
| data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT); | |
| data = data | BIT(offset); | |
| iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT); | |
| return 0; | |
| } | |
| static int gef_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) | |
| { | |
| unsigned int data; | |
| struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); | |
| /* Set value before switching to output */ | |
| gef_gpio_set(mmchip->regs + GEF_GPIO_OUT, offset, value); | |
| data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT); | |
| data = data & ~BIT(offset); | |
| iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT); | |
| return 0; | |
| } | |
| static int gef_gpio_get(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); | |
| return !!(ioread32be(mmchip->regs + GEF_GPIO_IN) & BIT(offset)); | |
| } | |
| static const struct of_device_id gef_gpio_ids[] = { | |
| { | |
| .compatible = "gef,sbc610-gpio", | |
| .data = (void *)19, | |
| }, { | |
| .compatible = "gef,sbc310-gpio", | |
| .data = (void *)6, | |
| }, { | |
| .compatible = "ge,imp3a-gpio", | |
| .data = (void *)16, | |
| }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, gef_gpio_ids); | |
| static int __init gef_gpio_probe(struct platform_device *pdev) | |
| { | |
| const struct of_device_id *of_id = | |
| of_match_device(gef_gpio_ids, &pdev->dev); | |
| struct of_mm_gpio_chip *mmchip; | |
| mmchip = devm_kzalloc(&pdev->dev, sizeof(*mmchip), GFP_KERNEL); | |
| if (!mmchip) | |
| return -ENOMEM; | |
| /* Setup pointers to chip functions */ | |
| mmchip->gc.ngpio = (u16)(uintptr_t)of_id->data; | |
| mmchip->gc.of_gpio_n_cells = 2; | |
| mmchip->gc.direction_input = gef_gpio_dir_in; | |
| mmchip->gc.direction_output = gef_gpio_dir_out; | |
| mmchip->gc.get = gef_gpio_get; | |
| mmchip->gc.set = gef_gpio_set; | |
| /* This function adds a memory mapped GPIO chip */ | |
| return of_mm_gpiochip_add(pdev->dev.of_node, mmchip); | |
| }; | |
| static struct platform_driver gef_gpio_driver = { | |
| .driver = { | |
| .name = "gef-gpio", | |
| .owner = THIS_MODULE, | |
| .of_match_table = gef_gpio_ids, | |
| }, | |
| }; | |
| module_platform_driver_probe(gef_gpio_driver, gef_gpio_probe); | |
| MODULE_DESCRIPTION("GE I/O FPGA GPIO driver"); | |
| MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com"); | |
| MODULE_LICENSE("GPL"); |