| /* | |
| * VMware Detection code. | |
| * | |
| * Copyright (C) 2008, VMware, Inc. | |
| * Author : Alok N Kataria <akataria@vmware.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | |
| * NON INFRINGEMENT. See the GNU General Public License for more | |
| * details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. | |
| * | |
| */ | |
| #include <linux/dmi.h> | |
| #include <linux/module.h> | |
| #include <asm/div64.h> | |
| #include <asm/x86_init.h> | |
| #include <asm/hypervisor.h> | |
| #define CPUID_VMWARE_INFO_LEAF 0x40000000 | |
| #define VMWARE_HYPERVISOR_MAGIC 0x564D5868 | |
| #define VMWARE_HYPERVISOR_PORT 0x5658 | |
| #define VMWARE_PORT_CMD_GETVERSION 10 | |
| #define VMWARE_PORT_CMD_GETHZ 45 | |
| #define VMWARE_PORT_CMD_GETVCPU_INFO 68 | |
| #define VMWARE_PORT_CMD_LEGACY_X2APIC 3 | |
| #define VMWARE_PORT_CMD_VCPU_RESERVED 31 | |
| #define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \ | |
| __asm__("inl (%%dx)" : \ | |
| "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \ | |
| "0"(VMWARE_HYPERVISOR_MAGIC), \ | |
| "1"(VMWARE_PORT_CMD_##cmd), \ | |
| "2"(VMWARE_HYPERVISOR_PORT), "3"(UINT_MAX) : \ | |
| "memory"); | |
| static inline int __vmware_platform(void) | |
| { | |
| uint32_t eax, ebx, ecx, edx; | |
| VMWARE_PORT(GETVERSION, eax, ebx, ecx, edx); | |
| return eax != (uint32_t)-1 && ebx == VMWARE_HYPERVISOR_MAGIC; | |
| } | |
| static unsigned long vmware_get_tsc_khz(void) | |
| { | |
| uint64_t tsc_hz, lpj; | |
| uint32_t eax, ebx, ecx, edx; | |
| VMWARE_PORT(GETHZ, eax, ebx, ecx, edx); | |
| tsc_hz = eax | (((uint64_t)ebx) << 32); | |
| do_div(tsc_hz, 1000); | |
| BUG_ON(tsc_hz >> 32); | |
| printk(KERN_INFO "TSC freq read from hypervisor : %lu.%03lu MHz\n", | |
| (unsigned long) tsc_hz / 1000, | |
| (unsigned long) tsc_hz % 1000); | |
| if (!preset_lpj) { | |
| lpj = ((u64)tsc_hz * 1000); | |
| do_div(lpj, HZ); | |
| preset_lpj = lpj; | |
| } | |
| return tsc_hz; | |
| } | |
| static void __init vmware_platform_setup(void) | |
| { | |
| uint32_t eax, ebx, ecx, edx; | |
| VMWARE_PORT(GETHZ, eax, ebx, ecx, edx); | |
| if (ebx != UINT_MAX) | |
| x86_platform.calibrate_tsc = vmware_get_tsc_khz; | |
| else | |
| printk(KERN_WARNING | |
| "Failed to get TSC freq from the hypervisor\n"); | |
| } | |
| /* | |
| * While checking the dmi string information, just checking the product | |
| * serial key should be enough, as this will always have a VMware | |
| * specific string when running under VMware hypervisor. | |
| */ | |
| static uint32_t __init vmware_platform(void) | |
| { | |
| if (cpu_has_hypervisor) { | |
| unsigned int eax; | |
| unsigned int hyper_vendor_id[3]; | |
| cpuid(CPUID_VMWARE_INFO_LEAF, &eax, &hyper_vendor_id[0], | |
| &hyper_vendor_id[1], &hyper_vendor_id[2]); | |
| if (!memcmp(hyper_vendor_id, "VMwareVMware", 12)) | |
| return CPUID_VMWARE_INFO_LEAF; | |
| } else if (dmi_available && dmi_name_in_serial("VMware") && | |
| __vmware_platform()) | |
| return 1; | |
| return 0; | |
| } | |
| /* | |
| * VMware hypervisor takes care of exporting a reliable TSC to the guest. | |
| * Still, due to timing difference when running on virtual cpus, the TSC can | |
| * be marked as unstable in some cases. For example, the TSC sync check at | |
| * bootup can fail due to a marginal offset between vcpus' TSCs (though the | |
| * TSCs do not drift from each other). Also, the ACPI PM timer clocksource | |
| * is not suitable as a watchdog when running on a hypervisor because the | |
| * kernel may miss a wrap of the counter if the vcpu is descheduled for a | |
| * long time. To skip these checks at runtime we set these capability bits, | |
| * so that the kernel could just trust the hypervisor with providing a | |
| * reliable virtual TSC that is suitable for timekeeping. | |
| */ | |
| static void vmware_set_cpu_features(struct cpuinfo_x86 *c) | |
| { | |
| set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); | |
| set_cpu_cap(c, X86_FEATURE_TSC_RELIABLE); | |
| } | |
| /* Checks if hypervisor supports x2apic without VT-D interrupt remapping. */ | |
| static bool __init vmware_legacy_x2apic_available(void) | |
| { | |
| uint32_t eax, ebx, ecx, edx; | |
| VMWARE_PORT(GETVCPU_INFO, eax, ebx, ecx, edx); | |
| return (eax & (1 << VMWARE_PORT_CMD_VCPU_RESERVED)) == 0 && | |
| (eax & (1 << VMWARE_PORT_CMD_LEGACY_X2APIC)) != 0; | |
| } | |
| const __refconst struct hypervisor_x86 x86_hyper_vmware = { | |
| .name = "VMware", | |
| .detect = vmware_platform, | |
| .set_cpu_features = vmware_set_cpu_features, | |
| .init_platform = vmware_platform_setup, | |
| .x2apic_available = vmware_legacy_x2apic_available, | |
| }; | |
| EXPORT_SYMBOL(x86_hyper_vmware); |