| /* | |
| * Copyright 2010 Tilera Corporation. All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation, version 2. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | |
| * NON INFRINGEMENT. See the GNU General Public License for | |
| * more details. | |
| * | |
| * These routines make two important assumptions: | |
| * | |
| * 1. atomic_t is really an int and can be freely cast back and forth | |
| * (validated in __init_atomic_per_cpu). | |
| * | |
| * 2. userspace uses sys_cmpxchg() for all atomic operations, thus using | |
| * the same locking convention that all the kernel atomic routines use. | |
| */ | |
| #ifndef _ASM_TILE_FUTEX_H | |
| #define _ASM_TILE_FUTEX_H | |
| #ifndef __ASSEMBLY__ | |
| #include <linux/futex.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/errno.h> | |
| #include <asm/atomic.h> | |
| /* | |
| * Support macros for futex operations. Do not use these macros directly. | |
| * They assume "ret", "val", "oparg", and "uaddr" in the lexical context. | |
| * __futex_cmpxchg() additionally assumes "oldval". | |
| */ | |
| #ifdef __tilegx__ | |
| #define __futex_asm(OP) \ | |
| asm("1: {" #OP " %1, %3, %4; movei %0, 0 }\n" \ | |
| ".pushsection .fixup,\"ax\"\n" \ | |
| "0: { movei %0, %5; j 9f }\n" \ | |
| ".section __ex_table,\"a\"\n" \ | |
| ".align 8\n" \ | |
| ".quad 1b, 0b\n" \ | |
| ".popsection\n" \ | |
| "9:" \ | |
| : "=r" (ret), "=r" (val), "+m" (*(uaddr)) \ | |
| : "r" (uaddr), "r" (oparg), "i" (-EFAULT)) | |
| #define __futex_set() __futex_asm(exch4) | |
| #define __futex_add() __futex_asm(fetchadd4) | |
| #define __futex_or() __futex_asm(fetchor4) | |
| #define __futex_andn() ({ oparg = ~oparg; __futex_asm(fetchand4); }) | |
| #define __futex_cmpxchg() \ | |
| ({ __insn_mtspr(SPR_CMPEXCH_VALUE, oldval); __futex_asm(cmpexch4); }) | |
| #define __futex_xor() \ | |
| ({ \ | |
| u32 oldval, n = oparg; \ | |
| if ((ret = __get_user(oldval, uaddr)) == 0) { \ | |
| do { \ | |
| oparg = oldval ^ n; \ | |
| __futex_cmpxchg(); \ | |
| } while (ret == 0 && oldval != val); \ | |
| } \ | |
| }) | |
| /* No need to prefetch, since the atomic ops go to the home cache anyway. */ | |
| #define __futex_prolog() | |
| #else | |
| #define __futex_call(FN) \ | |
| { \ | |
| struct __get_user gu = FN((u32 __force *)uaddr, lock, oparg); \ | |
| val = gu.val; \ | |
| ret = gu.err; \ | |
| } | |
| #define __futex_set() __futex_call(__atomic_xchg) | |
| #define __futex_add() __futex_call(__atomic_xchg_add) | |
| #define __futex_or() __futex_call(__atomic_or) | |
| #define __futex_andn() __futex_call(__atomic_andn) | |
| #define __futex_xor() __futex_call(__atomic_xor) | |
| #define __futex_cmpxchg() \ | |
| { \ | |
| struct __get_user gu = __atomic_cmpxchg((u32 __force *)uaddr, \ | |
| lock, oldval, oparg); \ | |
| val = gu.val; \ | |
| ret = gu.err; \ | |
| } | |
| /* | |
| * Find the lock pointer for the atomic calls to use, and issue a | |
| * prefetch to the user address to bring it into cache. Similar to | |
| * __atomic_setup(), but we can't do a read into the L1 since it might | |
| * fault; instead we do a prefetch into the L2. | |
| */ | |
| #define __futex_prolog() \ | |
| int *lock; \ | |
| __insn_prefetch(uaddr); \ | |
| lock = __atomic_hashed_lock((int __force *)uaddr) | |
| #endif | |
| static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr) | |
| { | |
| int op = (encoded_op >> 28) & 7; | |
| int cmp = (encoded_op >> 24) & 15; | |
| int oparg = (encoded_op << 8) >> 20; | |
| int cmparg = (encoded_op << 20) >> 20; | |
| int uninitialized_var(val), ret; | |
| __futex_prolog(); | |
| /* The 32-bit futex code makes this assumption, so validate it here. */ | |
| BUILD_BUG_ON(sizeof(atomic_t) != sizeof(int)); | |
| if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) | |
| oparg = 1 << oparg; | |
| if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) | |
| return -EFAULT; | |
| pagefault_disable(); | |
| switch (op) { | |
| case FUTEX_OP_SET: | |
| __futex_set(); | |
| break; | |
| case FUTEX_OP_ADD: | |
| __futex_add(); | |
| break; | |
| case FUTEX_OP_OR: | |
| __futex_or(); | |
| break; | |
| case FUTEX_OP_ANDN: | |
| __futex_andn(); | |
| break; | |
| case FUTEX_OP_XOR: | |
| __futex_xor(); | |
| break; | |
| default: | |
| ret = -ENOSYS; | |
| break; | |
| } | |
| pagefault_enable(); | |
| if (!ret) { | |
| switch (cmp) { | |
| case FUTEX_OP_CMP_EQ: | |
| ret = (val == cmparg); | |
| break; | |
| case FUTEX_OP_CMP_NE: | |
| ret = (val != cmparg); | |
| break; | |
| case FUTEX_OP_CMP_LT: | |
| ret = (val < cmparg); | |
| break; | |
| case FUTEX_OP_CMP_GE: | |
| ret = (val >= cmparg); | |
| break; | |
| case FUTEX_OP_CMP_LE: | |
| ret = (val <= cmparg); | |
| break; | |
| case FUTEX_OP_CMP_GT: | |
| ret = (val > cmparg); | |
| break; | |
| default: | |
| ret = -ENOSYS; | |
| } | |
| } | |
| return ret; | |
| } | |
| static inline int futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, | |
| u32 oldval, u32 oparg) | |
| { | |
| int ret, val; | |
| __futex_prolog(); | |
| if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) | |
| return -EFAULT; | |
| __futex_cmpxchg(); | |
| *uval = val; | |
| return ret; | |
| } | |
| #endif /* !__ASSEMBLY__ */ | |
| #endif /* _ASM_TILE_FUTEX_H */ |