| /* | |
| * x86 SMP booting functions | |
| * | |
| * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> | |
| * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com> | |
| * Copyright 2001 Andi Kleen, SuSE Labs. | |
| * | |
| * Much of the core SMP work is based on previous work by Thomas Radke, to | |
| * whom a great many thanks are extended. | |
| * | |
| * Thanks to Intel for making available several different Pentium, | |
| * Pentium Pro and Pentium-II/Xeon MP machines. | |
| * Original development of Linux SMP code supported by Caldera. | |
| * | |
| * This code is released under the GNU General Public License version 2 | |
| * | |
| * Fixes | |
| * Felix Koop : NR_CPUS used properly | |
| * Jose Renau : Handle single CPU case. | |
| * Alan Cox : By repeated request 8) - Total BogoMIP report. | |
| * Greg Wright : Fix for kernel stacks panic. | |
| * Erich Boleyn : MP v1.4 and additional changes. | |
| * Matthias Sattler : Changes for 2.1 kernel map. | |
| * Michel Lespinasse : Changes for 2.1 kernel map. | |
| * Michael Chastain : Change trampoline.S to gnu as. | |
| * Alan Cox : Dumb bug: 'B' step PPro's are fine | |
| * Ingo Molnar : Added APIC timers, based on code | |
| * from Jose Renau | |
| * Ingo Molnar : various cleanups and rewrites | |
| * Tigran Aivazian : fixed "0.00 in /proc/uptime on SMP" bug. | |
| * Maciej W. Rozycki : Bits for genuine 82489DX APICs | |
| * Andi Kleen : Changed for SMP boot into long mode. | |
| * Rusty Russell : Hacked into shape for new "hotplug" boot process. | |
| * Andi Kleen : Converted to new state machine. | |
| * Various cleanups. | |
| * Probably mostly hotplug CPU ready now. | |
| * Ashok Raj : CPU hotplug support | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/mm.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/thread_info.h> | |
| #include <linux/module.h> | |
| #include <linux/delay.h> | |
| #include <linux/mc146818rtc.h> | |
| #include <linux/smp.h> | |
| #include <linux/kdebug.h> | |
| #include <asm/mtrr.h> | |
| #include <asm/pgalloc.h> | |
| #include <asm/desc.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/proto.h> | |
| #include <asm/nmi.h> | |
| #include <asm/irq.h> | |
| #include <asm/hw_irq.h> | |
| #include <asm/numa.h> | |
| /* Number of siblings per CPU package */ | |
| int smp_num_siblings = 1; | |
| EXPORT_SYMBOL(smp_num_siblings); | |
| /* Last level cache ID of each logical CPU */ | |
| DEFINE_PER_CPU(u16, cpu_llc_id) = BAD_APICID; | |
| /* Bitmask of currently online CPUs */ | |
| cpumask_t cpu_online_map __read_mostly; | |
| EXPORT_SYMBOL(cpu_online_map); | |
| /* | |
| * Private maps to synchronize booting between AP and BP. | |
| * Probably not needed anymore, but it makes for easier debugging. -AK | |
| */ | |
| cpumask_t cpu_callin_map; | |
| cpumask_t cpu_callout_map; | |
| cpumask_t cpu_possible_map; | |
| EXPORT_SYMBOL(cpu_possible_map); | |
| /* Per CPU bogomips and other parameters */ | |
| DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info); | |
| EXPORT_PER_CPU_SYMBOL(cpu_info); | |
| /* Set when the idlers are all forked */ | |
| int smp_threads_ready; | |
| /* representing HT siblings of each logical CPU */ | |
| DEFINE_PER_CPU(cpumask_t, cpu_sibling_map); | |
| EXPORT_PER_CPU_SYMBOL(cpu_sibling_map); | |
| /* representing HT and core siblings of each logical CPU */ | |
| DEFINE_PER_CPU(cpumask_t, cpu_core_map); | |
| EXPORT_PER_CPU_SYMBOL(cpu_core_map); | |
| /* | |
| * Trampoline 80x86 program as an array. | |
| */ | |
| extern const unsigned char trampoline_data[]; | |
| extern const unsigned char trampoline_end[]; | |
| /* State of each CPU */ | |
| DEFINE_PER_CPU(int, cpu_state) = { 0 }; | |
| /* | |
| * Store all idle threads, this can be reused instead of creating | |
| * a new thread. Also avoids complicated thread destroy functionality | |
| * for idle threads. | |
| */ | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| /* | |
| * Needed only for CONFIG_HOTPLUG_CPU because __cpuinitdata is | |
| * removed after init for !CONFIG_HOTPLUG_CPU. | |
| */ | |
| static DEFINE_PER_CPU(struct task_struct *, idle_thread_array); | |
| #define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x)) | |
| #define set_idle_for_cpu(x,p) (per_cpu(idle_thread_array, x) = (p)) | |
| #else | |
| struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ; | |
| #define get_idle_for_cpu(x) (idle_thread_array[(x)]) | |
| #define set_idle_for_cpu(x,p) (idle_thread_array[(x)] = (p)) | |
| #endif | |
| /* | |
| * Currently trivial. Write the real->protected mode | |
| * bootstrap into the page concerned. The caller | |
| * has made sure it's suitably aligned. | |
| */ | |
| static unsigned long __cpuinit setup_trampoline(void) | |
| { | |
| void *tramp = __va(SMP_TRAMPOLINE_BASE); | |
| memcpy(tramp, trampoline_data, trampoline_end - trampoline_data); | |
| return virt_to_phys(tramp); | |
| } | |
| /* | |
| * The bootstrap kernel entry code has set these up. Save them for | |
| * a given CPU | |
| */ | |
| static void __cpuinit smp_store_cpu_info(int id) | |
| { | |
| struct cpuinfo_x86 *c = &cpu_data(id); | |
| *c = boot_cpu_data; | |
| c->cpu_index = id; | |
| identify_cpu(c); | |
| print_cpu_info(c); | |
| } | |
| static atomic_t init_deasserted __cpuinitdata; | |
| /* | |
| * Report back to the Boot Processor. | |
| * Running on AP. | |
| */ | |
| void __cpuinit smp_callin(void) | |
| { | |
| int cpuid, phys_id; | |
| unsigned long timeout; | |
| /* | |
| * If waken up by an INIT in an 82489DX configuration | |
| * we may get here before an INIT-deassert IPI reaches | |
| * our local APIC. We have to wait for the IPI or we'll | |
| * lock up on an APIC access. | |
| */ | |
| while (!atomic_read(&init_deasserted)) | |
| cpu_relax(); | |
| /* | |
| * (This works even if the APIC is not enabled.) | |
| */ | |
| phys_id = GET_APIC_ID(apic_read(APIC_ID)); | |
| cpuid = smp_processor_id(); | |
| if (cpu_isset(cpuid, cpu_callin_map)) { | |
| panic("smp_callin: phys CPU#%d, CPU#%d already present??\n", | |
| phys_id, cpuid); | |
| } | |
| Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id); | |
| /* | |
| * STARTUP IPIs are fragile beasts as they might sometimes | |
| * trigger some glue motherboard logic. Complete APIC bus | |
| * silence for 1 second, this overestimates the time the | |
| * boot CPU is spending to send the up to 2 STARTUP IPIs | |
| * by a factor of two. This should be enough. | |
| */ | |
| /* | |
| * Waiting 2s total for startup (udelay is not yet working) | |
| */ | |
| timeout = jiffies + 2*HZ; | |
| while (time_before(jiffies, timeout)) { | |
| /* | |
| * Has the boot CPU finished it's STARTUP sequence? | |
| */ | |
| if (cpu_isset(cpuid, cpu_callout_map)) | |
| break; | |
| cpu_relax(); | |
| } | |
| if (!time_before(jiffies, timeout)) { | |
| panic("smp_callin: CPU%d started up but did not get a callout!\n", | |
| cpuid); | |
| } | |
| /* | |
| * the boot CPU has finished the init stage and is spinning | |
| * on callin_map until we finish. We are free to set up this | |
| * CPU, first the APIC. (this is probably redundant on most | |
| * boards) | |
| */ | |
| Dprintk("CALLIN, before setup_local_APIC().\n"); | |
| setup_local_APIC(); | |
| end_local_APIC_setup(); | |
| /* | |
| * Get our bogomips. | |
| * | |
| * Need to enable IRQs because it can take longer and then | |
| * the NMI watchdog might kill us. | |
| */ | |
| local_irq_enable(); | |
| calibrate_delay(); | |
| local_irq_disable(); | |
| Dprintk("Stack at about %p\n",&cpuid); | |
| /* | |
| * Save our processor parameters | |
| */ | |
| smp_store_cpu_info(cpuid); | |
| /* | |
| * Allow the master to continue. | |
| */ | |
| cpu_set(cpuid, cpu_callin_map); | |
| } | |
| /* maps the cpu to the sched domain representing multi-core */ | |
| cpumask_t cpu_coregroup_map(int cpu) | |
| { | |
| struct cpuinfo_x86 *c = &cpu_data(cpu); | |
| /* | |
| * For perf, we return last level cache shared map. | |
| * And for power savings, we return cpu_core_map | |
| */ | |
| if (sched_mc_power_savings || sched_smt_power_savings) | |
| return per_cpu(cpu_core_map, cpu); | |
| else | |
| return c->llc_shared_map; | |
| } | |
| /* representing cpus for which sibling maps can be computed */ | |
| static cpumask_t cpu_sibling_setup_map; | |
| static inline void set_cpu_sibling_map(int cpu) | |
| { | |
| int i; | |
| struct cpuinfo_x86 *c = &cpu_data(cpu); | |
| cpu_set(cpu, cpu_sibling_setup_map); | |
| if (smp_num_siblings > 1) { | |
| for_each_cpu_mask(i, cpu_sibling_setup_map) { | |
| if (c->phys_proc_id == cpu_data(i).phys_proc_id && | |
| c->cpu_core_id == cpu_data(i).cpu_core_id) { | |
| cpu_set(i, per_cpu(cpu_sibling_map, cpu)); | |
| cpu_set(cpu, per_cpu(cpu_sibling_map, i)); | |
| cpu_set(i, per_cpu(cpu_core_map, cpu)); | |
| cpu_set(cpu, per_cpu(cpu_core_map, i)); | |
| cpu_set(i, c->llc_shared_map); | |
| cpu_set(cpu, cpu_data(i).llc_shared_map); | |
| } | |
| } | |
| } else { | |
| cpu_set(cpu, per_cpu(cpu_sibling_map, cpu)); | |
| } | |
| cpu_set(cpu, c->llc_shared_map); | |
| if (current_cpu_data.x86_max_cores == 1) { | |
| per_cpu(cpu_core_map, cpu) = per_cpu(cpu_sibling_map, cpu); | |
| c->booted_cores = 1; | |
| return; | |
| } | |
| for_each_cpu_mask(i, cpu_sibling_setup_map) { | |
| if (per_cpu(cpu_llc_id, cpu) != BAD_APICID && | |
| per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) { | |
| cpu_set(i, c->llc_shared_map); | |
| cpu_set(cpu, cpu_data(i).llc_shared_map); | |
| } | |
| if (c->phys_proc_id == cpu_data(i).phys_proc_id) { | |
| cpu_set(i, per_cpu(cpu_core_map, cpu)); | |
| cpu_set(cpu, per_cpu(cpu_core_map, i)); | |
| /* | |
| * Does this new cpu bringup a new core? | |
| */ | |
| if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1) { | |
| /* | |
| * for each core in package, increment | |
| * the booted_cores for this new cpu | |
| */ | |
| if (first_cpu(per_cpu(cpu_sibling_map, i)) == i) | |
| c->booted_cores++; | |
| /* | |
| * increment the core count for all | |
| * the other cpus in this package | |
| */ | |
| if (i != cpu) | |
| cpu_data(i).booted_cores++; | |
| } else if (i != cpu && !c->booted_cores) | |
| c->booted_cores = cpu_data(i).booted_cores; | |
| } | |
| } | |
| } | |
| /* | |
| * Setup code on secondary processor (after comming out of the trampoline) | |
| */ | |
| void __cpuinit start_secondary(void) | |
| { | |
| /* | |
| * Dont put anything before smp_callin(), SMP | |
| * booting is too fragile that we want to limit the | |
| * things done here to the most necessary things. | |
| */ | |
| cpu_init(); | |
| preempt_disable(); | |
| smp_callin(); | |
| /* otherwise gcc will move up the smp_processor_id before the cpu_init */ | |
| barrier(); | |
| /* | |
| * Check TSC sync first: | |
| */ | |
| check_tsc_sync_target(); | |
| if (nmi_watchdog == NMI_IO_APIC) { | |
| disable_8259A_irq(0); | |
| enable_NMI_through_LVT0(); | |
| enable_8259A_irq(0); | |
| } | |
| /* | |
| * The sibling maps must be set before turing the online map on for | |
| * this cpu | |
| */ | |
| set_cpu_sibling_map(smp_processor_id()); | |
| /* | |
| * We need to hold call_lock, so there is no inconsistency | |
| * between the time smp_call_function() determines number of | |
| * IPI recipients, and the time when the determination is made | |
| * for which cpus receive the IPI in genapic_flat.c. Holding this | |
| * lock helps us to not include this cpu in a currently in progress | |
| * smp_call_function(). | |
| */ | |
| lock_ipi_call_lock(); | |
| spin_lock(&vector_lock); | |
| /* Setup the per cpu irq handling data structures */ | |
| __setup_vector_irq(smp_processor_id()); | |
| /* | |
| * Allow the master to continue. | |
| */ | |
| cpu_set(smp_processor_id(), cpu_online_map); | |
| per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; | |
| spin_unlock(&vector_lock); | |
| unlock_ipi_call_lock(); | |
| setup_secondary_clock(); | |
| cpu_idle(); | |
| } | |
| extern volatile unsigned long init_rsp; | |
| extern void (*initial_code)(void); | |
| #ifdef APIC_DEBUG | |
| static void inquire_remote_apic(int apicid) | |
| { | |
| unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 }; | |
| char *names[] = { "ID", "VERSION", "SPIV" }; | |
| int timeout; | |
| u32 status; | |
| printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid); | |
| for (i = 0; i < ARRAY_SIZE(regs); i++) { | |
| printk(KERN_INFO "... APIC #%d %s: ", apicid, names[i]); | |
| /* | |
| * Wait for idle. | |
| */ | |
| status = safe_apic_wait_icr_idle(); | |
| if (status) | |
| printk(KERN_CONT | |
| "a previous APIC delivery may have failed\n"); | |
| apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); | |
| apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]); | |
| timeout = 0; | |
| do { | |
| udelay(100); | |
| status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK; | |
| } while (status == APIC_ICR_RR_INPROG && timeout++ < 1000); | |
| switch (status) { | |
| case APIC_ICR_RR_VALID: | |
| status = apic_read(APIC_RRR); | |
| printk(KERN_CONT "%08x\n", status); | |
| break; | |
| default: | |
| printk(KERN_CONT "failed\n"); | |
| } | |
| } | |
| } | |
| #endif | |
| /* | |
| * Kick the secondary to wake up. | |
| */ | |
| static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int start_rip) | |
| { | |
| unsigned long send_status, accept_status = 0; | |
| int maxlvt, num_starts, j; | |
| Dprintk("Asserting INIT.\n"); | |
| /* | |
| * Turn INIT on target chip | |
| */ | |
| apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); | |
| /* | |
| * Send IPI | |
| */ | |
| apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | |
| | APIC_DM_INIT); | |
| Dprintk("Waiting for send to finish...\n"); | |
| send_status = safe_apic_wait_icr_idle(); | |
| mdelay(10); | |
| Dprintk("Deasserting INIT.\n"); | |
| /* Target chip */ | |
| apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); | |
| /* Send IPI */ | |
| apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); | |
| Dprintk("Waiting for send to finish...\n"); | |
| send_status = safe_apic_wait_icr_idle(); | |
| mb(); | |
| atomic_set(&init_deasserted, 1); | |
| num_starts = 2; | |
| /* | |
| * Run STARTUP IPI loop. | |
| */ | |
| Dprintk("#startup loops: %d.\n", num_starts); | |
| maxlvt = lapic_get_maxlvt(); | |
| for (j = 1; j <= num_starts; j++) { | |
| Dprintk("Sending STARTUP #%d.\n",j); | |
| apic_write(APIC_ESR, 0); | |
| apic_read(APIC_ESR); | |
| Dprintk("After apic_write.\n"); | |
| /* | |
| * STARTUP IPI | |
| */ | |
| /* Target chip */ | |
| apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); | |
| /* Boot on the stack */ | |
| /* Kick the second */ | |
| apic_write(APIC_ICR, APIC_DM_STARTUP | (start_rip >> 12)); | |
| /* | |
| * Give the other CPU some time to accept the IPI. | |
| */ | |
| udelay(300); | |
| Dprintk("Startup point 1.\n"); | |
| Dprintk("Waiting for send to finish...\n"); | |
| send_status = safe_apic_wait_icr_idle(); | |
| /* | |
| * Give the other CPU some time to accept the IPI. | |
| */ | |
| udelay(200); | |
| /* | |
| * Due to the Pentium erratum 3AP. | |
| */ | |
| if (maxlvt > 3) { | |
| apic_write(APIC_ESR, 0); | |
| } | |
| accept_status = (apic_read(APIC_ESR) & 0xEF); | |
| if (send_status || accept_status) | |
| break; | |
| } | |
| Dprintk("After Startup.\n"); | |
| if (send_status) | |
| printk(KERN_ERR "APIC never delivered???\n"); | |
| if (accept_status) | |
| printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status); | |
| return (send_status | accept_status); | |
| } | |
| struct create_idle { | |
| struct work_struct work; | |
| struct task_struct *idle; | |
| struct completion done; | |
| int cpu; | |
| }; | |
| static void __cpuinit do_fork_idle(struct work_struct *work) | |
| { | |
| struct create_idle *c_idle = | |
| container_of(work, struct create_idle, work); | |
| c_idle->idle = fork_idle(c_idle->cpu); | |
| complete(&c_idle->done); | |
| } | |
| /* | |
| * Boot one CPU. | |
| */ | |
| static int __cpuinit do_boot_cpu(int cpu, int apicid) | |
| { | |
| unsigned long boot_error; | |
| int timeout; | |
| unsigned long start_rip; | |
| struct create_idle c_idle = { | |
| .cpu = cpu, | |
| .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done), | |
| }; | |
| INIT_WORK(&c_idle.work, do_fork_idle); | |
| /* allocate memory for gdts of secondary cpus. Hotplug is considered */ | |
| if (!cpu_gdt_descr[cpu].address && | |
| !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) { | |
| printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu); | |
| return -1; | |
| } | |
| /* Allocate node local memory for AP pdas */ | |
| if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) { | |
| struct x8664_pda *newpda, *pda; | |
| int node = cpu_to_node(cpu); | |
| pda = cpu_pda(cpu); | |
| newpda = kmalloc_node(sizeof (struct x8664_pda), GFP_ATOMIC, | |
| node); | |
| if (newpda) { | |
| memcpy(newpda, pda, sizeof (struct x8664_pda)); | |
| cpu_pda(cpu) = newpda; | |
| } else | |
| printk(KERN_ERR | |
| "Could not allocate node local PDA for CPU %d on node %d\n", | |
| cpu, node); | |
| } | |
| alternatives_smp_switch(1); | |
| c_idle.idle = get_idle_for_cpu(cpu); | |
| if (c_idle.idle) { | |
| c_idle.idle->thread.sp = (unsigned long) (((struct pt_regs *) | |
| (THREAD_SIZE + task_stack_page(c_idle.idle))) - 1); | |
| init_idle(c_idle.idle, cpu); | |
| goto do_rest; | |
| } | |
| /* | |
| * During cold boot process, keventd thread is not spun up yet. | |
| * When we do cpu hot-add, we create idle threads on the fly, we should | |
| * not acquire any attributes from the calling context. Hence the clean | |
| * way to create kernel_threads() is to do that from keventd(). | |
| * We do the current_is_keventd() due to the fact that ACPI notifier | |
| * was also queuing to keventd() and when the caller is already running | |
| * in context of keventd(), we would end up with locking up the keventd | |
| * thread. | |
| */ | |
| if (!keventd_up() || current_is_keventd()) | |
| c_idle.work.func(&c_idle.work); | |
| else { | |
| schedule_work(&c_idle.work); | |
| wait_for_completion(&c_idle.done); | |
| } | |
| if (IS_ERR(c_idle.idle)) { | |
| printk("failed fork for CPU %d\n", cpu); | |
| return PTR_ERR(c_idle.idle); | |
| } | |
| set_idle_for_cpu(cpu, c_idle.idle); | |
| do_rest: | |
| cpu_pda(cpu)->pcurrent = c_idle.idle; | |
| start_rip = setup_trampoline(); | |
| init_rsp = c_idle.idle->thread.sp; | |
| load_sp0(&per_cpu(init_tss, cpu), &c_idle.idle->thread); | |
| initial_code = start_secondary; | |
| clear_tsk_thread_flag(c_idle.idle, TIF_FORK); | |
| printk(KERN_INFO "Booting processor %d/%d APIC 0x%x\n", cpu, | |
| cpus_weight(cpu_present_map), | |
| apicid); | |
| /* | |
| * This grunge runs the startup process for | |
| * the targeted processor. | |
| */ | |
| atomic_set(&init_deasserted, 0); | |
| Dprintk("Setting warm reset code and vector.\n"); | |
| CMOS_WRITE(0xa, 0xf); | |
| local_flush_tlb(); | |
| Dprintk("1.\n"); | |
| *((volatile unsigned short *) phys_to_virt(0x469)) = start_rip >> 4; | |
| Dprintk("2.\n"); | |
| *((volatile unsigned short *) phys_to_virt(0x467)) = start_rip & 0xf; | |
| Dprintk("3.\n"); | |
| /* | |
| * Be paranoid about clearing APIC errors. | |
| */ | |
| apic_write(APIC_ESR, 0); | |
| apic_read(APIC_ESR); | |
| /* | |
| * Status is now clean | |
| */ | |
| boot_error = 0; | |
| /* | |
| * Starting actual IPI sequence... | |
| */ | |
| boot_error = wakeup_secondary_via_INIT(apicid, start_rip); | |
| if (!boot_error) { | |
| /* | |
| * allow APs to start initializing. | |
| */ | |
| Dprintk("Before Callout %d.\n", cpu); | |
| cpu_set(cpu, cpu_callout_map); | |
| Dprintk("After Callout %d.\n", cpu); | |
| /* | |
| * Wait 5s total for a response | |
| */ | |
| for (timeout = 0; timeout < 50000; timeout++) { | |
| if (cpu_isset(cpu, cpu_callin_map)) | |
| break; /* It has booted */ | |
| udelay(100); | |
| } | |
| if (cpu_isset(cpu, cpu_callin_map)) { | |
| /* number CPUs logically, starting from 1 (BSP is 0) */ | |
| Dprintk("CPU has booted.\n"); | |
| } else { | |
| boot_error = 1; | |
| if (*((volatile unsigned char *)phys_to_virt(SMP_TRAMPOLINE_BASE)) | |
| == 0xA5) | |
| /* trampoline started but...? */ | |
| printk("Stuck ??\n"); | |
| else | |
| /* trampoline code not run */ | |
| printk("Not responding.\n"); | |
| #ifdef APIC_DEBUG | |
| inquire_remote_apic(apicid); | |
| #endif | |
| } | |
| } | |
| if (boot_error) { | |
| cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */ | |
| clear_bit(cpu, (unsigned long *)&cpu_initialized); /* was set by cpu_init() */ | |
| clear_node_cpumask(cpu); /* was set by numa_add_cpu */ | |
| cpu_clear(cpu, cpu_present_map); | |
| cpu_clear(cpu, cpu_possible_map); | |
| per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID; | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| cycles_t cacheflush_time; | |
| unsigned long cache_decay_ticks; | |
| /* | |
| * Cleanup possible dangling ends... | |
| */ | |
| static __cpuinit void smp_cleanup_boot(void) | |
| { | |
| /* | |
| * Paranoid: Set warm reset code and vector here back | |
| * to default values. | |
| */ | |
| CMOS_WRITE(0, 0xf); | |
| /* | |
| * Reset trampoline flag | |
| */ | |
| *((volatile int *) phys_to_virt(0x467)) = 0; | |
| } | |
| /* | |
| * Fall back to non SMP mode after errors. | |
| * | |
| * RED-PEN audit/test this more. I bet there is more state messed up here. | |
| */ | |
| static __init void disable_smp(void) | |
| { | |
| cpu_present_map = cpumask_of_cpu(0); | |
| cpu_possible_map = cpumask_of_cpu(0); | |
| if (smp_found_config) | |
| phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id); | |
| else | |
| phys_cpu_present_map = physid_mask_of_physid(0); | |
| cpu_set(0, per_cpu(cpu_sibling_map, 0)); | |
| cpu_set(0, per_cpu(cpu_core_map, 0)); | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| int additional_cpus __initdata = -1; | |
| /* | |
| * cpu_possible_map should be static, it cannot change as cpu's | |
| * are onlined, or offlined. The reason is per-cpu data-structures | |
| * are allocated by some modules at init time, and dont expect to | |
| * do this dynamically on cpu arrival/departure. | |
| * cpu_present_map on the other hand can change dynamically. | |
| * In case when cpu_hotplug is not compiled, then we resort to current | |
| * behaviour, which is cpu_possible == cpu_present. | |
| * - Ashok Raj | |
| * | |
| * Three ways to find out the number of additional hotplug CPUs: | |
| * - If the BIOS specified disabled CPUs in ACPI/mptables use that. | |
| * - The user can overwrite it with additional_cpus=NUM | |
| * - Otherwise don't reserve additional CPUs. | |
| * We do this because additional CPUs waste a lot of memory. | |
| * -AK | |
| */ | |
| __init void prefill_possible_map(void) | |
| { | |
| int i; | |
| int possible; | |
| if (additional_cpus == -1) { | |
| if (disabled_cpus > 0) | |
| additional_cpus = disabled_cpus; | |
| else | |
| additional_cpus = 0; | |
| } | |
| possible = num_processors + additional_cpus; | |
| if (possible > NR_CPUS) | |
| possible = NR_CPUS; | |
| printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n", | |
| possible, | |
| max_t(int, possible - num_processors, 0)); | |
| for (i = 0; i < possible; i++) | |
| cpu_set(i, cpu_possible_map); | |
| } | |
| #endif | |
| /* | |
| * Various sanity checks. | |
| */ | |
| static int __init smp_sanity_check(unsigned max_cpus) | |
| { | |
| if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) { | |
| printk("weird, boot CPU (#%d) not listed by the BIOS.\n", | |
| hard_smp_processor_id()); | |
| physid_set(hard_smp_processor_id(), phys_cpu_present_map); | |
| } | |
| /* | |
| * If we couldn't find an SMP configuration at boot time, | |
| * get out of here now! | |
| */ | |
| if (!smp_found_config) { | |
| printk(KERN_NOTICE "SMP motherboard not detected.\n"); | |
| disable_smp(); | |
| if (APIC_init_uniprocessor()) | |
| printk(KERN_NOTICE "Local APIC not detected." | |
| " Using dummy APIC emulation.\n"); | |
| return -1; | |
| } | |
| /* | |
| * Should not be necessary because the MP table should list the boot | |
| * CPU too, but we do it for the sake of robustness anyway. | |
| */ | |
| if (!physid_isset(boot_cpu_id, phys_cpu_present_map)) { | |
| printk(KERN_NOTICE "weird, boot CPU (#%d) not listed by the BIOS.\n", | |
| boot_cpu_id); | |
| physid_set(hard_smp_processor_id(), phys_cpu_present_map); | |
| } | |
| /* | |
| * If we couldn't find a local APIC, then get out of here now! | |
| */ | |
| if (!cpu_has_apic) { | |
| printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", | |
| boot_cpu_id); | |
| printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n"); | |
| nr_ioapics = 0; | |
| return -1; | |
| } | |
| /* | |
| * If SMP should be disabled, then really disable it! | |
| */ | |
| if (!max_cpus) { | |
| printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n"); | |
| nr_ioapics = 0; | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static void __init smp_cpu_index_default(void) | |
| { | |
| int i; | |
| struct cpuinfo_x86 *c; | |
| for_each_cpu_mask(i, cpu_possible_map) { | |
| c = &cpu_data(i); | |
| /* mark all to hotplug */ | |
| c->cpu_index = NR_CPUS; | |
| } | |
| } | |
| /* | |
| * Prepare for SMP bootup. The MP table or ACPI has been read | |
| * earlier. Just do some sanity checking here and enable APIC mode. | |
| */ | |
| void __init smp_prepare_cpus(unsigned int max_cpus) | |
| { | |
| nmi_watchdog_default(); | |
| smp_cpu_index_default(); | |
| current_cpu_data = boot_cpu_data; | |
| current_thread_info()->cpu = 0; /* needed? */ | |
| set_cpu_sibling_map(0); | |
| if (smp_sanity_check(max_cpus) < 0) { | |
| printk(KERN_INFO "SMP disabled\n"); | |
| disable_smp(); | |
| return; | |
| } | |
| /* | |
| * Switch from PIC to APIC mode. | |
| */ | |
| setup_local_APIC(); | |
| /* | |
| * Enable IO APIC before setting up error vector | |
| */ | |
| if (!skip_ioapic_setup && nr_ioapics) | |
| enable_IO_APIC(); | |
| end_local_APIC_setup(); | |
| if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_id) { | |
| panic("Boot APIC ID in local APIC unexpected (%d vs %d)", | |
| GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_id); | |
| /* Or can we switch back to PIC here? */ | |
| } | |
| /* | |
| * Now start the IO-APICs | |
| */ | |
| if (!skip_ioapic_setup && nr_ioapics) | |
| setup_IO_APIC(); | |
| else | |
| nr_ioapics = 0; | |
| /* | |
| * Set up local APIC timer on boot CPU. | |
| */ | |
| setup_boot_clock(); | |
| } | |
| /* | |
| * Early setup to make printk work. | |
| */ | |
| void __init smp_prepare_boot_cpu(void) | |
| { | |
| int me = smp_processor_id(); | |
| /* already set me in cpu_online_map in boot_cpu_init() */ | |
| cpu_set(me, cpu_callout_map); | |
| per_cpu(cpu_state, me) = CPU_ONLINE; | |
| } | |
| /* | |
| * Entry point to boot a CPU. | |
| */ | |
| int __cpuinit __cpu_up(unsigned int cpu) | |
| { | |
| int apicid = cpu_present_to_apicid(cpu); | |
| unsigned long flags; | |
| int err; | |
| WARN_ON(irqs_disabled()); | |
| Dprintk("++++++++++++++++++++=_---CPU UP %u\n", cpu); | |
| if (apicid == BAD_APICID || apicid == boot_cpu_id || | |
| !physid_isset(apicid, phys_cpu_present_map)) { | |
| printk("__cpu_up: bad cpu %d\n", cpu); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Already booted CPU? | |
| */ | |
| if (cpu_isset(cpu, cpu_callin_map)) { | |
| Dprintk("do_boot_cpu %d Already started\n", cpu); | |
| return -ENOSYS; | |
| } | |
| /* | |
| * Save current MTRR state in case it was changed since early boot | |
| * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync: | |
| */ | |
| mtrr_save_state(); | |
| per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; | |
| /* Boot it! */ | |
| err = do_boot_cpu(cpu, apicid); | |
| if (err < 0) { | |
| Dprintk("do_boot_cpu failed %d\n", err); | |
| return err; | |
| } | |
| /* Unleash the CPU! */ | |
| Dprintk("waiting for cpu %d\n", cpu); | |
| /* | |
| * Make sure and check TSC sync: | |
| */ | |
| local_irq_save(flags); | |
| check_tsc_sync_source(cpu); | |
| local_irq_restore(flags); | |
| while (!cpu_isset(cpu, cpu_online_map)) | |
| cpu_relax(); | |
| err = 0; | |
| return err; | |
| } | |
| /* | |
| * Finish the SMP boot. | |
| */ | |
| void __init smp_cpus_done(unsigned int max_cpus) | |
| { | |
| smp_cleanup_boot(); | |
| setup_ioapic_dest(); | |
| check_nmi_watchdog(); | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| static void remove_siblinginfo(int cpu) | |
| { | |
| int sibling; | |
| struct cpuinfo_x86 *c = &cpu_data(cpu); | |
| for_each_cpu_mask(sibling, per_cpu(cpu_core_map, cpu)) { | |
| cpu_clear(cpu, per_cpu(cpu_core_map, sibling)); | |
| /* | |
| * last thread sibling in this cpu core going down | |
| */ | |
| if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1) | |
| cpu_data(sibling).booted_cores--; | |
| } | |
| for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu)) | |
| cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling)); | |
| cpus_clear(per_cpu(cpu_sibling_map, cpu)); | |
| cpus_clear(per_cpu(cpu_core_map, cpu)); | |
| c->phys_proc_id = 0; | |
| c->cpu_core_id = 0; | |
| cpu_clear(cpu, cpu_sibling_setup_map); | |
| } | |
| static void __ref remove_cpu_from_maps(void) | |
| { | |
| int cpu = smp_processor_id(); | |
| cpu_clear(cpu, cpu_callout_map); | |
| cpu_clear(cpu, cpu_callin_map); | |
| clear_bit(cpu, (unsigned long *)&cpu_initialized); /* was set by cpu_init() */ | |
| clear_node_cpumask(cpu); | |
| } | |
| int __cpu_disable(void) | |
| { | |
| int cpu = smp_processor_id(); | |
| /* | |
| * Perhaps use cpufreq to drop frequency, but that could go | |
| * into generic code. | |
| * | |
| * We won't take down the boot processor on i386 due to some | |
| * interrupts only being able to be serviced by the BSP. | |
| * Especially so if we're not using an IOAPIC -zwane | |
| */ | |
| if (cpu == 0) | |
| return -EBUSY; | |
| if (nmi_watchdog == NMI_LOCAL_APIC) | |
| stop_apic_nmi_watchdog(NULL); | |
| clear_local_APIC(); | |
| /* | |
| * HACK: | |
| * Allow any queued timer interrupts to get serviced | |
| * This is only a temporary solution until we cleanup | |
| * fixup_irqs as we do for IA64. | |
| */ | |
| local_irq_enable(); | |
| mdelay(1); | |
| local_irq_disable(); | |
| remove_siblinginfo(cpu); | |
| spin_lock(&vector_lock); | |
| /* It's now safe to remove this processor from the online map */ | |
| cpu_clear(cpu, cpu_online_map); | |
| spin_unlock(&vector_lock); | |
| remove_cpu_from_maps(); | |
| fixup_irqs(cpu_online_map); | |
| return 0; | |
| } | |
| void __cpu_die(unsigned int cpu) | |
| { | |
| /* We don't do anything here: idle task is faking death itself. */ | |
| unsigned int i; | |
| for (i = 0; i < 10; i++) { | |
| /* They ack this in play_dead by setting CPU_DEAD */ | |
| if (per_cpu(cpu_state, cpu) == CPU_DEAD) { | |
| printk ("CPU %d is now offline\n", cpu); | |
| if (1 == num_online_cpus()) | |
| alternatives_smp_switch(0); | |
| return; | |
| } | |
| msleep(100); | |
| } | |
| printk(KERN_ERR "CPU %u didn't die...\n", cpu); | |
| } | |
| static __init int setup_additional_cpus(char *s) | |
| { | |
| return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL; | |
| } | |
| early_param("additional_cpus", setup_additional_cpus); | |
| #else /* ... !CONFIG_HOTPLUG_CPU */ | |
| int __cpu_disable(void) | |
| { | |
| return -ENOSYS; | |
| } | |
| void __cpu_die(unsigned int cpu) | |
| { | |
| /* We said "no" in __cpu_disable */ | |
| BUG(); | |
| } | |
| #endif /* CONFIG_HOTPLUG_CPU */ |