| /****************************************************************************** | |
| * touchkitusb.c -- Driver for eGalax TouchKit USB Touchscreens | |
| * | |
| * Copyright (C) 2004-2005 by Daniel Ritz <daniel.ritz@gmx.ch> | |
| * Copyright (C) by Todd E. Johnson (mtouchusb.c) | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of the | |
| * License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * | |
| * Based upon mtouchusb.c | |
| * | |
| *****************************************************************************/ | |
| //#define DEBUG | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/usb/input.h> | |
| #define TOUCHKIT_MIN_XC 0x0 | |
| #define TOUCHKIT_MAX_XC 0x07ff | |
| #define TOUCHKIT_XC_FUZZ 0x0 | |
| #define TOUCHKIT_XC_FLAT 0x0 | |
| #define TOUCHKIT_MIN_YC 0x0 | |
| #define TOUCHKIT_MAX_YC 0x07ff | |
| #define TOUCHKIT_YC_FUZZ 0x0 | |
| #define TOUCHKIT_YC_FLAT 0x0 | |
| #define TOUCHKIT_REPORT_DATA_SIZE 16 | |
| #define TOUCHKIT_DOWN 0x01 | |
| #define TOUCHKIT_PKT_TYPE_MASK 0xFE | |
| #define TOUCHKIT_PKT_TYPE_REPT 0x80 | |
| #define TOUCHKIT_PKT_TYPE_DIAG 0x0A | |
| #define DRIVER_VERSION "v0.1" | |
| #define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>" | |
| #define DRIVER_DESC "eGalax TouchKit USB HID Touchscreen Driver" | |
| static int swap_xy; | |
| module_param(swap_xy, bool, 0644); | |
| MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped."); | |
| struct touchkit_usb { | |
| unsigned char *data; | |
| dma_addr_t data_dma; | |
| char buffer[TOUCHKIT_REPORT_DATA_SIZE]; | |
| int buf_len; | |
| struct urb *irq; | |
| struct usb_device *udev; | |
| struct input_dev *input; | |
| char name[128]; | |
| char phys[64]; | |
| }; | |
| static struct usb_device_id touchkit_devices[] = { | |
| {USB_DEVICE(0x3823, 0x0001)}, | |
| {USB_DEVICE(0x0123, 0x0001)}, | |
| {USB_DEVICE(0x0eef, 0x0001)}, | |
| {USB_DEVICE(0x0eef, 0x0002)}, | |
| {} | |
| }; | |
| /* helpers to read the data */ | |
| static inline int touchkit_get_touched(char *data) | |
| { | |
| return (data[0] & TOUCHKIT_DOWN) ? 1 : 0; | |
| } | |
| static inline int touchkit_get_x(char *data) | |
| { | |
| return ((data[3] & 0x0F) << 7) | (data[4] & 0x7F); | |
| } | |
| static inline int touchkit_get_y(char *data) | |
| { | |
| return ((data[1] & 0x0F) << 7) | (data[2] & 0x7F); | |
| } | |
| /* processes one input packet. */ | |
| static void touchkit_process_pkt(struct touchkit_usb *touchkit, | |
| struct pt_regs *regs, char *pkt) | |
| { | |
| int x, y; | |
| /* only process report packets */ | |
| if ((pkt[0] & TOUCHKIT_PKT_TYPE_MASK) != TOUCHKIT_PKT_TYPE_REPT) | |
| return; | |
| if (swap_xy) { | |
| y = touchkit_get_x(pkt); | |
| x = touchkit_get_y(pkt); | |
| } else { | |
| x = touchkit_get_x(pkt); | |
| y = touchkit_get_y(pkt); | |
| } | |
| input_regs(touchkit->input, regs); | |
| input_report_key(touchkit->input, BTN_TOUCH, touchkit_get_touched(pkt)); | |
| input_report_abs(touchkit->input, ABS_X, x); | |
| input_report_abs(touchkit->input, ABS_Y, y); | |
| input_sync(touchkit->input); | |
| } | |
| static int touchkit_get_pkt_len(char *buf) | |
| { | |
| switch (buf[0] & TOUCHKIT_PKT_TYPE_MASK) { | |
| case TOUCHKIT_PKT_TYPE_REPT: | |
| return 5; | |
| case TOUCHKIT_PKT_TYPE_DIAG: | |
| return buf[1] + 2; | |
| } | |
| return 0; | |
| } | |
| static void touchkit_process(struct touchkit_usb *touchkit, int len, | |
| struct pt_regs *regs) | |
| { | |
| char *buffer; | |
| int pkt_len, buf_len, pos; | |
| /* if the buffer contains data, append */ | |
| if (unlikely(touchkit->buf_len)) { | |
| int tmp; | |
| /* if only 1 byte in buffer, add another one to get length */ | |
| if (touchkit->buf_len == 1) | |
| touchkit->buffer[1] = touchkit->data[0]; | |
| pkt_len = touchkit_get_pkt_len(touchkit->buffer); | |
| /* unknown packet: drop everything */ | |
| if (!pkt_len) | |
| return; | |
| /* append, process */ | |
| tmp = pkt_len - touchkit->buf_len; | |
| memcpy(touchkit->buffer + touchkit->buf_len, touchkit->data, tmp); | |
| touchkit_process_pkt(touchkit, regs, touchkit->buffer); | |
| buffer = touchkit->data + tmp; | |
| buf_len = len - tmp; | |
| } else { | |
| buffer = touchkit->data; | |
| buf_len = len; | |
| } | |
| /* only one byte left in buffer */ | |
| if (unlikely(buf_len == 1)) { | |
| touchkit->buffer[0] = buffer[0]; | |
| touchkit->buf_len = 1; | |
| return; | |
| } | |
| /* loop over the buffer */ | |
| pos = 0; | |
| while (pos < buf_len) { | |
| /* get packet len */ | |
| pkt_len = touchkit_get_pkt_len(buffer + pos); | |
| /* unknown packet: drop everything */ | |
| if (unlikely(!pkt_len)) | |
| return; | |
| /* full packet: process */ | |
| if (likely(pkt_len <= buf_len)) { | |
| touchkit_process_pkt(touchkit, regs, buffer + pos); | |
| } else { | |
| /* incomplete packet: save in buffer */ | |
| memcpy(touchkit->buffer, buffer + pos, buf_len - pos); | |
| touchkit->buf_len = buf_len - pos; | |
| } | |
| pos += pkt_len; | |
| } | |
| } | |
| static void touchkit_irq(struct urb *urb, struct pt_regs *regs) | |
| { | |
| struct touchkit_usb *touchkit = urb->context; | |
| int retval; | |
| switch (urb->status) { | |
| case 0: | |
| /* success */ | |
| break; | |
| case -ETIMEDOUT: | |
| /* this urb is timing out */ | |
| dbg("%s - urb timed out - was the device unplugged?", | |
| __FUNCTION__); | |
| return; | |
| case -ECONNRESET: | |
| case -ENOENT: | |
| case -ESHUTDOWN: | |
| /* this urb is terminated, clean up */ | |
| dbg("%s - urb shutting down with status: %d", | |
| __FUNCTION__, urb->status); | |
| return; | |
| default: | |
| dbg("%s - nonzero urb status received: %d", | |
| __FUNCTION__, urb->status); | |
| goto exit; | |
| } | |
| touchkit_process(touchkit, urb->actual_length, regs); | |
| exit: | |
| retval = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (retval) | |
| err("%s - usb_submit_urb failed with result: %d", | |
| __FUNCTION__, retval); | |
| } | |
| static int touchkit_open(struct input_dev *input) | |
| { | |
| struct touchkit_usb *touchkit = input->private; | |
| touchkit->irq->dev = touchkit->udev; | |
| if (usb_submit_urb(touchkit->irq, GFP_ATOMIC)) | |
| return -EIO; | |
| return 0; | |
| } | |
| static void touchkit_close(struct input_dev *input) | |
| { | |
| struct touchkit_usb *touchkit = input->private; | |
| usb_kill_urb(touchkit->irq); | |
| } | |
| static int touchkit_alloc_buffers(struct usb_device *udev, | |
| struct touchkit_usb *touchkit) | |
| { | |
| touchkit->data = usb_buffer_alloc(udev, TOUCHKIT_REPORT_DATA_SIZE, | |
| SLAB_ATOMIC, &touchkit->data_dma); | |
| if (!touchkit->data) | |
| return -1; | |
| return 0; | |
| } | |
| static void touchkit_free_buffers(struct usb_device *udev, | |
| struct touchkit_usb *touchkit) | |
| { | |
| if (touchkit->data) | |
| usb_buffer_free(udev, TOUCHKIT_REPORT_DATA_SIZE, | |
| touchkit->data, touchkit->data_dma); | |
| } | |
| static int touchkit_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id) | |
| { | |
| struct touchkit_usb *touchkit; | |
| struct input_dev *input_dev; | |
| struct usb_host_interface *interface; | |
| struct usb_endpoint_descriptor *endpoint; | |
| struct usb_device *udev = interface_to_usbdev(intf); | |
| interface = intf->cur_altsetting; | |
| endpoint = &interface->endpoint[0].desc; | |
| touchkit = kzalloc(sizeof(struct touchkit_usb), GFP_KERNEL); | |
| input_dev = input_allocate_device(); | |
| if (!touchkit || !input_dev) | |
| goto out_free; | |
| if (touchkit_alloc_buffers(udev, touchkit)) | |
| goto out_free; | |
| touchkit->irq = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!touchkit->irq) { | |
| dbg("%s - usb_alloc_urb failed: touchkit->irq", __FUNCTION__); | |
| goto out_free_buffers; | |
| } | |
| touchkit->udev = udev; | |
| touchkit->input = input_dev; | |
| if (udev->manufacturer) | |
| strlcpy(touchkit->name, udev->manufacturer, sizeof(touchkit->name)); | |
| if (udev->product) { | |
| if (udev->manufacturer) | |
| strlcat(touchkit->name, " ", sizeof(touchkit->name)); | |
| strlcat(touchkit->name, udev->product, sizeof(touchkit->name)); | |
| } | |
| if (!strlen(touchkit->name)) | |
| snprintf(touchkit->name, sizeof(touchkit->name), | |
| "USB Touchscreen %04x:%04x", | |
| le16_to_cpu(udev->descriptor.idVendor), | |
| le16_to_cpu(udev->descriptor.idProduct)); | |
| usb_make_path(udev, touchkit->phys, sizeof(touchkit->phys)); | |
| strlcpy(touchkit->phys, "/input0", sizeof(touchkit->phys)); | |
| input_dev->name = touchkit->name; | |
| input_dev->phys = touchkit->phys; | |
| usb_to_input_id(udev, &input_dev->id); | |
| input_dev->cdev.dev = &intf->dev; | |
| input_dev->private = touchkit; | |
| input_dev->open = touchkit_open; | |
| input_dev->close = touchkit_close; | |
| input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); | |
| input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); | |
| input_set_abs_params(input_dev, ABS_X, TOUCHKIT_MIN_XC, TOUCHKIT_MAX_XC, | |
| TOUCHKIT_XC_FUZZ, TOUCHKIT_XC_FLAT); | |
| input_set_abs_params(input_dev, ABS_Y, TOUCHKIT_MIN_YC, TOUCHKIT_MAX_YC, | |
| TOUCHKIT_YC_FUZZ, TOUCHKIT_YC_FLAT); | |
| usb_fill_int_urb(touchkit->irq, touchkit->udev, | |
| usb_rcvintpipe(touchkit->udev, 0x81), | |
| touchkit->data, TOUCHKIT_REPORT_DATA_SIZE, | |
| touchkit_irq, touchkit, endpoint->bInterval); | |
| touchkit->irq->transfer_dma = touchkit->data_dma; | |
| touchkit->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | |
| input_register_device(touchkit->input); | |
| usb_set_intfdata(intf, touchkit); | |
| return 0; | |
| out_free_buffers: | |
| touchkit_free_buffers(udev, touchkit); | |
| out_free: | |
| input_free_device(input_dev); | |
| kfree(touchkit); | |
| return -ENOMEM; | |
| } | |
| static void touchkit_disconnect(struct usb_interface *intf) | |
| { | |
| struct touchkit_usb *touchkit = usb_get_intfdata(intf); | |
| dbg("%s - called", __FUNCTION__); | |
| if (!touchkit) | |
| return; | |
| dbg("%s - touchkit is initialized, cleaning up", __FUNCTION__); | |
| usb_set_intfdata(intf, NULL); | |
| usb_kill_urb(touchkit->irq); | |
| input_unregister_device(touchkit->input); | |
| usb_free_urb(touchkit->irq); | |
| touchkit_free_buffers(interface_to_usbdev(intf), touchkit); | |
| kfree(touchkit); | |
| } | |
| MODULE_DEVICE_TABLE(usb, touchkit_devices); | |
| static struct usb_driver touchkit_driver = { | |
| .name = "touchkitusb", | |
| .probe = touchkit_probe, | |
| .disconnect = touchkit_disconnect, | |
| .id_table = touchkit_devices, | |
| }; | |
| static int __init touchkit_init(void) | |
| { | |
| return usb_register(&touchkit_driver); | |
| } | |
| static void __exit touchkit_cleanup(void) | |
| { | |
| usb_deregister(&touchkit_driver); | |
| } | |
| module_init(touchkit_init); | |
| module_exit(touchkit_cleanup); | |
| MODULE_AUTHOR(DRIVER_AUTHOR); | |
| MODULE_DESCRIPTION(DRIVER_DESC); | |
| MODULE_LICENSE("GPL"); |