|  | /********************************************************************** | 
|  | * Author: Cavium Networks | 
|  | * | 
|  | * Contact: support@caviumnetworks.com | 
|  | * This file is part of the OCTEON SDK | 
|  | * | 
|  | * Copyright (c) 2003-2007 Cavium Networks | 
|  | * | 
|  | * This file is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License, Version 2, as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This file is distributed in the hope that it will be useful, but | 
|  | * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty | 
|  | * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or | 
|  | * NONINFRINGEMENT.  See the GNU General Public License for more | 
|  | * details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this file; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | 
|  | * or visit http://www.gnu.org/licenses/. | 
|  | * | 
|  | * This file may also be available under a different license from Cavium. | 
|  | * Contact Cavium Networks for more information | 
|  | **********************************************************************/ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/phy.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <net/dst.h> | 
|  |  | 
|  | #include <asm/octeon/octeon.h> | 
|  |  | 
|  | #include "ethernet-defines.h" | 
|  | #include "octeon-ethernet.h" | 
|  | #include "ethernet-mem.h" | 
|  | #include "ethernet-rx.h" | 
|  | #include "ethernet-tx.h" | 
|  | #include "ethernet-mdio.h" | 
|  | #include "ethernet-util.h" | 
|  |  | 
|  | #include "cvmx-pip.h" | 
|  | #include "cvmx-pko.h" | 
|  | #include "cvmx-fau.h" | 
|  | #include "cvmx-ipd.h" | 
|  | #include "cvmx-helper.h" | 
|  |  | 
|  | #include "cvmx-gmxx-defs.h" | 
|  | #include "cvmx-smix-defs.h" | 
|  |  | 
|  | #if defined(CONFIG_CAVIUM_OCTEON_NUM_PACKET_BUFFERS) \ | 
|  | && CONFIG_CAVIUM_OCTEON_NUM_PACKET_BUFFERS | 
|  | int num_packet_buffers = CONFIG_CAVIUM_OCTEON_NUM_PACKET_BUFFERS; | 
|  | #else | 
|  | int num_packet_buffers = 1024; | 
|  | #endif | 
|  | module_param(num_packet_buffers, int, 0444); | 
|  | MODULE_PARM_DESC(num_packet_buffers, "\n" | 
|  | "\tNumber of packet buffers to allocate and store in the\n" | 
|  | "\tFPA. By default, 1024 packet buffers are used unless\n" | 
|  | "\tCONFIG_CAVIUM_OCTEON_NUM_PACKET_BUFFERS is defined."); | 
|  |  | 
|  | int pow_receive_group = 15; | 
|  | module_param(pow_receive_group, int, 0444); | 
|  | MODULE_PARM_DESC(pow_receive_group, "\n" | 
|  | "\tPOW group to receive packets from. All ethernet hardware\n" | 
|  | "\twill be configured to send incomming packets to this POW\n" | 
|  | "\tgroup. Also any other software can submit packets to this\n" | 
|  | "\tgroup for the kernel to process."); | 
|  |  | 
|  | int pow_send_group = -1; | 
|  | module_param(pow_send_group, int, 0644); | 
|  | MODULE_PARM_DESC(pow_send_group, "\n" | 
|  | "\tPOW group to send packets to other software on. This\n" | 
|  | "\tcontrols the creation of the virtual device pow0.\n" | 
|  | "\talways_use_pow also depends on this value."); | 
|  |  | 
|  | int always_use_pow; | 
|  | module_param(always_use_pow, int, 0444); | 
|  | MODULE_PARM_DESC(always_use_pow, "\n" | 
|  | "\tWhen set, always send to the pow group. This will cause\n" | 
|  | "\tpackets sent to real ethernet devices to be sent to the\n" | 
|  | "\tPOW group instead of the hardware. Unless some other\n" | 
|  | "\tapplication changes the config, packets will still be\n" | 
|  | "\treceived from the low level hardware. Use this option\n" | 
|  | "\tto allow a CVMX app to intercept all packets from the\n" | 
|  | "\tlinux kernel. You must specify pow_send_group along with\n" | 
|  | "\tthis option."); | 
|  |  | 
|  | char pow_send_list[128] = ""; | 
|  | module_param_string(pow_send_list, pow_send_list, sizeof(pow_send_list), 0444); | 
|  | MODULE_PARM_DESC(pow_send_list, "\n" | 
|  | "\tComma separated list of ethernet devices that should use the\n" | 
|  | "\tPOW for transmit instead of the actual ethernet hardware. This\n" | 
|  | "\tis a per port version of always_use_pow. always_use_pow takes\n" | 
|  | "\tprecedence over this list. For example, setting this to\n" | 
|  | "\t\"eth2,spi3,spi7\" would cause these three devices to transmit\n" | 
|  | "\tusing the pow_send_group."); | 
|  |  | 
|  | int max_rx_cpus = -1; | 
|  | module_param(max_rx_cpus, int, 0444); | 
|  | MODULE_PARM_DESC(max_rx_cpus, "\n" | 
|  | "\t\tThe maximum number of CPUs to use for packet reception.\n" | 
|  | "\t\tUse -1 to use all available CPUs."); | 
|  |  | 
|  | int rx_napi_weight = 32; | 
|  | module_param(rx_napi_weight, int, 0444); | 
|  | MODULE_PARM_DESC(rx_napi_weight, "The NAPI WEIGHT parameter."); | 
|  |  | 
|  | /* | 
|  | * The offset from mac_addr_base that should be used for the next port | 
|  | * that is configured.  By convention, if any mgmt ports exist on the | 
|  | * chip, they get the first mac addresses, The ports controlled by | 
|  | * this driver are numbered sequencially following any mgmt addresses | 
|  | * that may exist. | 
|  | */ | 
|  | static unsigned int cvm_oct_mac_addr_offset; | 
|  |  | 
|  | /** | 
|  | * cvm_oct_poll_queue - Workqueue for polling operations. | 
|  | */ | 
|  | struct workqueue_struct *cvm_oct_poll_queue; | 
|  |  | 
|  | /** | 
|  | * cvm_oct_poll_queue_stopping - flag to indicate polling should stop. | 
|  | * | 
|  | * Set to one right before cvm_oct_poll_queue is destroyed. | 
|  | */ | 
|  | atomic_t cvm_oct_poll_queue_stopping = ATOMIC_INIT(0); | 
|  |  | 
|  | /** | 
|  | * Array of every ethernet device owned by this driver indexed by | 
|  | * the ipd input port number. | 
|  | */ | 
|  | struct net_device *cvm_oct_device[TOTAL_NUMBER_OF_PORTS]; | 
|  |  | 
|  | u64 cvm_oct_tx_poll_interval; | 
|  |  | 
|  | static void cvm_oct_rx_refill_worker(struct work_struct *work); | 
|  | static DECLARE_DELAYED_WORK(cvm_oct_rx_refill_work, cvm_oct_rx_refill_worker); | 
|  |  | 
|  | static void cvm_oct_rx_refill_worker(struct work_struct *work) | 
|  | { | 
|  | /* | 
|  | * FPA 0 may have been drained, try to refill it if we need | 
|  | * more than num_packet_buffers / 2, otherwise normal receive | 
|  | * processing will refill it.  If it were drained, no packets | 
|  | * could be received so cvm_oct_napi_poll would never be | 
|  | * invoked to do the refill. | 
|  | */ | 
|  | cvm_oct_rx_refill_pool(num_packet_buffers / 2); | 
|  |  | 
|  | if (!atomic_read(&cvm_oct_poll_queue_stopping)) | 
|  | queue_delayed_work(cvm_oct_poll_queue, | 
|  | &cvm_oct_rx_refill_work, HZ); | 
|  | } | 
|  |  | 
|  | static void cvm_oct_periodic_worker(struct work_struct *work) | 
|  | { | 
|  | struct octeon_ethernet *priv = container_of(work, | 
|  | struct octeon_ethernet, | 
|  | port_periodic_work.work); | 
|  |  | 
|  | if (priv->poll) | 
|  | priv->poll(cvm_oct_device[priv->port]); | 
|  |  | 
|  | cvm_oct_device[priv->port]->netdev_ops->ndo_get_stats(cvm_oct_device[priv->port]); | 
|  |  | 
|  | if (!atomic_read(&cvm_oct_poll_queue_stopping)) | 
|  | queue_delayed_work(cvm_oct_poll_queue, &priv->port_periodic_work, HZ); | 
|  | } | 
|  |  | 
|  | static __init void cvm_oct_configure_common_hw(void) | 
|  | { | 
|  | /* Setup the FPA */ | 
|  | cvmx_fpa_enable(); | 
|  | cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL, CVMX_FPA_PACKET_POOL_SIZE, | 
|  | num_packet_buffers); | 
|  | cvm_oct_mem_fill_fpa(CVMX_FPA_WQE_POOL, CVMX_FPA_WQE_POOL_SIZE, | 
|  | num_packet_buffers); | 
|  | if (CVMX_FPA_OUTPUT_BUFFER_POOL != CVMX_FPA_PACKET_POOL) | 
|  | cvm_oct_mem_fill_fpa(CVMX_FPA_OUTPUT_BUFFER_POOL, | 
|  | CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE, 128); | 
|  |  | 
|  | if (USE_RED) | 
|  | cvmx_helper_setup_red(num_packet_buffers / 4, | 
|  | num_packet_buffers / 8); | 
|  |  | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cvm_oct_free_work- Free a work queue entry | 
|  | * | 
|  | * @work_queue_entry: Work queue entry to free | 
|  | * | 
|  | * Returns Zero on success, Negative on failure. | 
|  | */ | 
|  | int cvm_oct_free_work(void *work_queue_entry) | 
|  | { | 
|  | cvmx_wqe_t *work = work_queue_entry; | 
|  |  | 
|  | int segments = work->word2.s.bufs; | 
|  | union cvmx_buf_ptr segment_ptr = work->packet_ptr; | 
|  |  | 
|  | while (segments--) { | 
|  | union cvmx_buf_ptr next_ptr = *(union cvmx_buf_ptr *) | 
|  | cvmx_phys_to_ptr(segment_ptr.s.addr - 8); | 
|  | if (unlikely(!segment_ptr.s.i)) | 
|  | cvmx_fpa_free(cvm_oct_get_buffer_ptr(segment_ptr), | 
|  | segment_ptr.s.pool, | 
|  | DONT_WRITEBACK(CVMX_FPA_PACKET_POOL_SIZE / | 
|  | 128)); | 
|  | segment_ptr = next_ptr; | 
|  | } | 
|  | cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, DONT_WRITEBACK(1)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(cvm_oct_free_work); | 
|  |  | 
|  | /** | 
|  | * cvm_oct_common_get_stats - get the low level ethernet statistics | 
|  | * @dev:    Device to get the statistics from | 
|  | * | 
|  | * Returns Pointer to the statistics | 
|  | */ | 
|  | static struct net_device_stats *cvm_oct_common_get_stats(struct net_device *dev) | 
|  | { | 
|  | cvmx_pip_port_status_t rx_status; | 
|  | cvmx_pko_port_status_t tx_status; | 
|  | struct octeon_ethernet *priv = netdev_priv(dev); | 
|  |  | 
|  | if (priv->port < CVMX_PIP_NUM_INPUT_PORTS) { | 
|  | if (octeon_is_simulation()) { | 
|  | /* The simulator doesn't support statistics */ | 
|  | memset(&rx_status, 0, sizeof(rx_status)); | 
|  | memset(&tx_status, 0, sizeof(tx_status)); | 
|  | } else { | 
|  | cvmx_pip_get_port_status(priv->port, 1, &rx_status); | 
|  | cvmx_pko_get_port_status(priv->port, 1, &tx_status); | 
|  | } | 
|  |  | 
|  | priv->stats.rx_packets += rx_status.inb_packets; | 
|  | priv->stats.tx_packets += tx_status.packets; | 
|  | priv->stats.rx_bytes += rx_status.inb_octets; | 
|  | priv->stats.tx_bytes += tx_status.octets; | 
|  | priv->stats.multicast += rx_status.multicast_packets; | 
|  | priv->stats.rx_crc_errors += rx_status.inb_errors; | 
|  | priv->stats.rx_frame_errors += rx_status.fcs_align_err_packets; | 
|  |  | 
|  | /* | 
|  | * The drop counter must be incremented atomically | 
|  | * since the RX tasklet also increments it. | 
|  | */ | 
|  | #ifdef CONFIG_64BIT | 
|  | atomic64_add(rx_status.dropped_packets, | 
|  | (atomic64_t *)&priv->stats.rx_dropped); | 
|  | #else | 
|  | atomic_add(rx_status.dropped_packets, | 
|  | (atomic_t *)&priv->stats.rx_dropped); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | return &priv->stats; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cvm_oct_common_change_mtu - change the link MTU | 
|  | * @dev:     Device to change | 
|  | * @new_mtu: The new MTU | 
|  | * | 
|  | * Returns Zero on success | 
|  | */ | 
|  | static int cvm_oct_common_change_mtu(struct net_device *dev, int new_mtu) | 
|  | { | 
|  | struct octeon_ethernet *priv = netdev_priv(dev); | 
|  | int interface = INTERFACE(priv->port); | 
|  | int index = INDEX(priv->port); | 
|  | #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) | 
|  | int vlan_bytes = 4; | 
|  | #else | 
|  | int vlan_bytes = 0; | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Limit the MTU to make sure the ethernet packets are between | 
|  | * 64 bytes and 65535 bytes. | 
|  | */ | 
|  | if ((new_mtu + 14 + 4 + vlan_bytes < 64) | 
|  | || (new_mtu + 14 + 4 + vlan_bytes > 65392)) { | 
|  | pr_err("MTU must be between %d and %d.\n", | 
|  | 64 - 14 - 4 - vlan_bytes, 65392 - 14 - 4 - vlan_bytes); | 
|  | return -EINVAL; | 
|  | } | 
|  | dev->mtu = new_mtu; | 
|  |  | 
|  | if ((interface < 2) | 
|  | && (cvmx_helper_interface_get_mode(interface) != | 
|  | CVMX_HELPER_INTERFACE_MODE_SPI)) { | 
|  | /* Add ethernet header and FCS, and VLAN if configured. */ | 
|  | int max_packet = new_mtu + 14 + 4 + vlan_bytes; | 
|  |  | 
|  | if (OCTEON_IS_MODEL(OCTEON_CN3XXX) | 
|  | || OCTEON_IS_MODEL(OCTEON_CN58XX)) { | 
|  | /* Signal errors on packets larger than the MTU */ | 
|  | cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX(index, interface), | 
|  | max_packet); | 
|  | } else { | 
|  | /* | 
|  | * Set the hardware to truncate packets larger | 
|  | * than the MTU and smaller the 64 bytes. | 
|  | */ | 
|  | union cvmx_pip_frm_len_chkx frm_len_chk; | 
|  | frm_len_chk.u64 = 0; | 
|  | frm_len_chk.s.minlen = 64; | 
|  | frm_len_chk.s.maxlen = max_packet; | 
|  | cvmx_write_csr(CVMX_PIP_FRM_LEN_CHKX(interface), | 
|  | frm_len_chk.u64); | 
|  | } | 
|  | /* | 
|  | * Set the hardware to truncate packets larger than | 
|  | * the MTU. The jabber register must be set to a | 
|  | * multiple of 8 bytes, so round up. | 
|  | */ | 
|  | cvmx_write_csr(CVMX_GMXX_RXX_JABBER(index, interface), | 
|  | (max_packet + 7) & ~7u); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cvm_oct_common_set_multicast_list - set the multicast list | 
|  | * @dev:    Device to work on | 
|  | */ | 
|  | static void cvm_oct_common_set_multicast_list(struct net_device *dev) | 
|  | { | 
|  | union cvmx_gmxx_prtx_cfg gmx_cfg; | 
|  | struct octeon_ethernet *priv = netdev_priv(dev); | 
|  | int interface = INTERFACE(priv->port); | 
|  | int index = INDEX(priv->port); | 
|  |  | 
|  | if ((interface < 2) | 
|  | && (cvmx_helper_interface_get_mode(interface) != | 
|  | CVMX_HELPER_INTERFACE_MODE_SPI)) { | 
|  | union cvmx_gmxx_rxx_adr_ctl control; | 
|  | control.u64 = 0; | 
|  | control.s.bcst = 1;	/* Allow broadcast MAC addresses */ | 
|  |  | 
|  | if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI) || | 
|  | (dev->flags & IFF_PROMISC)) | 
|  | /* Force accept multicast packets */ | 
|  | control.s.mcst = 2; | 
|  | else | 
|  | /* Force reject multicat packets */ | 
|  | control.s.mcst = 1; | 
|  |  | 
|  | if (dev->flags & IFF_PROMISC) | 
|  | /* | 
|  | * Reject matches if promisc. Since CAM is | 
|  | * shut off, should accept everything. | 
|  | */ | 
|  | control.s.cam_mode = 0; | 
|  | else | 
|  | /* Filter packets based on the CAM */ | 
|  | control.s.cam_mode = 1; | 
|  |  | 
|  | gmx_cfg.u64 = | 
|  | cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); | 
|  | cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), | 
|  | gmx_cfg.u64 & ~1ull); | 
|  |  | 
|  | cvmx_write_csr(CVMX_GMXX_RXX_ADR_CTL(index, interface), | 
|  | control.u64); | 
|  | if (dev->flags & IFF_PROMISC) | 
|  | cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM_EN | 
|  | (index, interface), 0); | 
|  | else | 
|  | cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM_EN | 
|  | (index, interface), 1); | 
|  |  | 
|  | cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), | 
|  | gmx_cfg.u64); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cvm_oct_common_set_mac_address - set the hardware MAC address for a device | 
|  | * @dev:    The device in question. | 
|  | * @addr:   Address structure to change it too. | 
|  |  | 
|  | * Returns Zero on success | 
|  | */ | 
|  | static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr) | 
|  | { | 
|  | struct octeon_ethernet *priv = netdev_priv(dev); | 
|  | union cvmx_gmxx_prtx_cfg gmx_cfg; | 
|  | int interface = INTERFACE(priv->port); | 
|  | int index = INDEX(priv->port); | 
|  |  | 
|  | memcpy(dev->dev_addr, addr + 2, 6); | 
|  |  | 
|  | if ((interface < 2) | 
|  | && (cvmx_helper_interface_get_mode(interface) != | 
|  | CVMX_HELPER_INTERFACE_MODE_SPI)) { | 
|  | int i; | 
|  | uint8_t *ptr = addr; | 
|  | uint64_t mac = 0; | 
|  | for (i = 0; i < 6; i++) | 
|  | mac = (mac << 8) | (uint64_t) (ptr[i + 2]); | 
|  |  | 
|  | gmx_cfg.u64 = | 
|  | cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); | 
|  | cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), | 
|  | gmx_cfg.u64 & ~1ull); | 
|  |  | 
|  | cvmx_write_csr(CVMX_GMXX_SMACX(index, interface), mac); | 
|  | cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM0(index, interface), | 
|  | ptr[2]); | 
|  | cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM1(index, interface), | 
|  | ptr[3]); | 
|  | cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM2(index, interface), | 
|  | ptr[4]); | 
|  | cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM3(index, interface), | 
|  | ptr[5]); | 
|  | cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM4(index, interface), | 
|  | ptr[6]); | 
|  | cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM5(index, interface), | 
|  | ptr[7]); | 
|  | cvm_oct_common_set_multicast_list(dev); | 
|  | cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), | 
|  | gmx_cfg.u64); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cvm_oct_common_init - per network device initialization | 
|  | * @dev:    Device to initialize | 
|  | * | 
|  | * Returns Zero on success | 
|  | */ | 
|  | int cvm_oct_common_init(struct net_device *dev) | 
|  | { | 
|  | struct octeon_ethernet *priv = netdev_priv(dev); | 
|  | struct sockaddr sa; | 
|  | u64 mac = ((u64)(octeon_bootinfo->mac_addr_base[0] & 0xff) << 40) | | 
|  | ((u64)(octeon_bootinfo->mac_addr_base[1] & 0xff) << 32) | | 
|  | ((u64)(octeon_bootinfo->mac_addr_base[2] & 0xff) << 24) | | 
|  | ((u64)(octeon_bootinfo->mac_addr_base[3] & 0xff) << 16) | | 
|  | ((u64)(octeon_bootinfo->mac_addr_base[4] & 0xff) << 8) | | 
|  | (u64)(octeon_bootinfo->mac_addr_base[5] & 0xff); | 
|  |  | 
|  | mac += cvm_oct_mac_addr_offset; | 
|  | sa.sa_data[0] = (mac >> 40) & 0xff; | 
|  | sa.sa_data[1] = (mac >> 32) & 0xff; | 
|  | sa.sa_data[2] = (mac >> 24) & 0xff; | 
|  | sa.sa_data[3] = (mac >> 16) & 0xff; | 
|  | sa.sa_data[4] = (mac >> 8) & 0xff; | 
|  | sa.sa_data[5] = mac & 0xff; | 
|  |  | 
|  | if (cvm_oct_mac_addr_offset >= octeon_bootinfo->mac_addr_count) | 
|  | printk(KERN_DEBUG "%s: Using MAC outside of the assigned range:" | 
|  | " %pM\n", dev->name, sa.sa_data); | 
|  | cvm_oct_mac_addr_offset++; | 
|  |  | 
|  | /* | 
|  | * Force the interface to use the POW send if always_use_pow | 
|  | * was specified or it is in the pow send list. | 
|  | */ | 
|  | if ((pow_send_group != -1) | 
|  | && (always_use_pow || strstr(pow_send_list, dev->name))) | 
|  | priv->queue = -1; | 
|  |  | 
|  | if (priv->queue != -1) { | 
|  | dev->features |= NETIF_F_SG; | 
|  | if (USE_HW_TCPUDP_CHECKSUM) | 
|  | dev->features |= NETIF_F_IP_CSUM; | 
|  | } | 
|  |  | 
|  | /* We do our own locking, Linux doesn't need to */ | 
|  | dev->features |= NETIF_F_LLTX; | 
|  | SET_ETHTOOL_OPS(dev, &cvm_oct_ethtool_ops); | 
|  |  | 
|  | cvm_oct_phy_setup_device(dev); | 
|  | dev->netdev_ops->ndo_set_mac_address(dev, &sa); | 
|  | dev->netdev_ops->ndo_change_mtu(dev, dev->mtu); | 
|  |  | 
|  | /* | 
|  | * Zero out stats for port so we won't mistakenly show | 
|  | * counters from the bootloader. | 
|  | */ | 
|  | memset(dev->netdev_ops->ndo_get_stats(dev), 0, | 
|  | sizeof(struct net_device_stats)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void cvm_oct_common_uninit(struct net_device *dev) | 
|  | { | 
|  | struct octeon_ethernet *priv = netdev_priv(dev); | 
|  |  | 
|  | if (priv->phydev) | 
|  | phy_disconnect(priv->phydev); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops cvm_oct_npi_netdev_ops = { | 
|  | .ndo_init		= cvm_oct_common_init, | 
|  | .ndo_uninit		= cvm_oct_common_uninit, | 
|  | .ndo_start_xmit		= cvm_oct_xmit, | 
|  | .ndo_set_multicast_list	= cvm_oct_common_set_multicast_list, | 
|  | .ndo_set_mac_address	= cvm_oct_common_set_mac_address, | 
|  | .ndo_do_ioctl		= cvm_oct_ioctl, | 
|  | .ndo_change_mtu		= cvm_oct_common_change_mtu, | 
|  | .ndo_get_stats		= cvm_oct_common_get_stats, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller	= cvm_oct_poll_controller, | 
|  | #endif | 
|  | }; | 
|  | static const struct net_device_ops cvm_oct_xaui_netdev_ops = { | 
|  | .ndo_init		= cvm_oct_xaui_init, | 
|  | .ndo_uninit		= cvm_oct_xaui_uninit, | 
|  | .ndo_open		= cvm_oct_xaui_open, | 
|  | .ndo_stop		= cvm_oct_xaui_stop, | 
|  | .ndo_start_xmit		= cvm_oct_xmit, | 
|  | .ndo_set_multicast_list	= cvm_oct_common_set_multicast_list, | 
|  | .ndo_set_mac_address	= cvm_oct_common_set_mac_address, | 
|  | .ndo_do_ioctl		= cvm_oct_ioctl, | 
|  | .ndo_change_mtu		= cvm_oct_common_change_mtu, | 
|  | .ndo_get_stats		= cvm_oct_common_get_stats, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller	= cvm_oct_poll_controller, | 
|  | #endif | 
|  | }; | 
|  | static const struct net_device_ops cvm_oct_sgmii_netdev_ops = { | 
|  | .ndo_init		= cvm_oct_sgmii_init, | 
|  | .ndo_uninit		= cvm_oct_sgmii_uninit, | 
|  | .ndo_open		= cvm_oct_sgmii_open, | 
|  | .ndo_stop		= cvm_oct_sgmii_stop, | 
|  | .ndo_start_xmit		= cvm_oct_xmit, | 
|  | .ndo_set_multicast_list	= cvm_oct_common_set_multicast_list, | 
|  | .ndo_set_mac_address	= cvm_oct_common_set_mac_address, | 
|  | .ndo_do_ioctl		= cvm_oct_ioctl, | 
|  | .ndo_change_mtu		= cvm_oct_common_change_mtu, | 
|  | .ndo_get_stats		= cvm_oct_common_get_stats, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller	= cvm_oct_poll_controller, | 
|  | #endif | 
|  | }; | 
|  | static const struct net_device_ops cvm_oct_spi_netdev_ops = { | 
|  | .ndo_init		= cvm_oct_spi_init, | 
|  | .ndo_uninit		= cvm_oct_spi_uninit, | 
|  | .ndo_start_xmit		= cvm_oct_xmit, | 
|  | .ndo_set_multicast_list	= cvm_oct_common_set_multicast_list, | 
|  | .ndo_set_mac_address	= cvm_oct_common_set_mac_address, | 
|  | .ndo_do_ioctl		= cvm_oct_ioctl, | 
|  | .ndo_change_mtu		= cvm_oct_common_change_mtu, | 
|  | .ndo_get_stats		= cvm_oct_common_get_stats, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller	= cvm_oct_poll_controller, | 
|  | #endif | 
|  | }; | 
|  | static const struct net_device_ops cvm_oct_rgmii_netdev_ops = { | 
|  | .ndo_init		= cvm_oct_rgmii_init, | 
|  | .ndo_uninit		= cvm_oct_rgmii_uninit, | 
|  | .ndo_open		= cvm_oct_rgmii_open, | 
|  | .ndo_stop		= cvm_oct_rgmii_stop, | 
|  | .ndo_start_xmit		= cvm_oct_xmit, | 
|  | .ndo_set_multicast_list	= cvm_oct_common_set_multicast_list, | 
|  | .ndo_set_mac_address	= cvm_oct_common_set_mac_address, | 
|  | .ndo_do_ioctl		= cvm_oct_ioctl, | 
|  | .ndo_change_mtu		= cvm_oct_common_change_mtu, | 
|  | .ndo_get_stats		= cvm_oct_common_get_stats, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller	= cvm_oct_poll_controller, | 
|  | #endif | 
|  | }; | 
|  | static const struct net_device_ops cvm_oct_pow_netdev_ops = { | 
|  | .ndo_init		= cvm_oct_common_init, | 
|  | .ndo_start_xmit		= cvm_oct_xmit_pow, | 
|  | .ndo_set_multicast_list	= cvm_oct_common_set_multicast_list, | 
|  | .ndo_set_mac_address	= cvm_oct_common_set_mac_address, | 
|  | .ndo_do_ioctl		= cvm_oct_ioctl, | 
|  | .ndo_change_mtu		= cvm_oct_common_change_mtu, | 
|  | .ndo_get_stats		= cvm_oct_common_get_stats, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller	= cvm_oct_poll_controller, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | extern void octeon_mdiobus_force_mod_depencency(void); | 
|  |  | 
|  | static int __init cvm_oct_init_module(void) | 
|  | { | 
|  | int num_interfaces; | 
|  | int interface; | 
|  | int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE; | 
|  | int qos; | 
|  |  | 
|  | octeon_mdiobus_force_mod_depencency(); | 
|  | pr_notice("cavium-ethernet %s\n", OCTEON_ETHERNET_VERSION); | 
|  |  | 
|  | if (OCTEON_IS_MODEL(OCTEON_CN52XX)) | 
|  | cvm_oct_mac_addr_offset = 2; /* First two are the mgmt ports. */ | 
|  | else if (OCTEON_IS_MODEL(OCTEON_CN56XX)) | 
|  | cvm_oct_mac_addr_offset = 1; /* First one is the mgmt port. */ | 
|  | else | 
|  | cvm_oct_mac_addr_offset = 0; | 
|  |  | 
|  | cvm_oct_poll_queue = create_singlethread_workqueue("octeon-ethernet"); | 
|  | if (cvm_oct_poll_queue == NULL) { | 
|  | pr_err("octeon-ethernet: Cannot create workqueue"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | cvm_oct_configure_common_hw(); | 
|  |  | 
|  | cvmx_helper_initialize_packet_io_global(); | 
|  |  | 
|  | /* Change the input group for all ports before input is enabled */ | 
|  | num_interfaces = cvmx_helper_get_number_of_interfaces(); | 
|  | for (interface = 0; interface < num_interfaces; interface++) { | 
|  | int num_ports = cvmx_helper_ports_on_interface(interface); | 
|  | int port; | 
|  |  | 
|  | for (port = cvmx_helper_get_ipd_port(interface, 0); | 
|  | port < cvmx_helper_get_ipd_port(interface, num_ports); | 
|  | port++) { | 
|  | union cvmx_pip_prt_tagx pip_prt_tagx; | 
|  | pip_prt_tagx.u64 = | 
|  | cvmx_read_csr(CVMX_PIP_PRT_TAGX(port)); | 
|  | pip_prt_tagx.s.grp = pow_receive_group; | 
|  | cvmx_write_csr(CVMX_PIP_PRT_TAGX(port), | 
|  | pip_prt_tagx.u64); | 
|  | } | 
|  | } | 
|  |  | 
|  | cvmx_helper_ipd_and_packet_input_enable(); | 
|  |  | 
|  | memset(cvm_oct_device, 0, sizeof(cvm_oct_device)); | 
|  |  | 
|  | /* | 
|  | * Initialize the FAU used for counting packet buffers that | 
|  | * need to be freed. | 
|  | */ | 
|  | cvmx_fau_atomic_write32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0); | 
|  |  | 
|  | /* Initialize the FAU used for counting tx SKBs that need to be freed */ | 
|  | cvmx_fau_atomic_write32(FAU_TOTAL_TX_TO_CLEAN, 0); | 
|  |  | 
|  | if ((pow_send_group != -1)) { | 
|  | struct net_device *dev; | 
|  | pr_info("\tConfiguring device for POW only access\n"); | 
|  | dev = alloc_etherdev(sizeof(struct octeon_ethernet)); | 
|  | if (dev) { | 
|  | /* Initialize the device private structure. */ | 
|  | struct octeon_ethernet *priv = netdev_priv(dev); | 
|  |  | 
|  | dev->netdev_ops = &cvm_oct_pow_netdev_ops; | 
|  | priv->imode = CVMX_HELPER_INTERFACE_MODE_DISABLED; | 
|  | priv->port = CVMX_PIP_NUM_INPUT_PORTS; | 
|  | priv->queue = -1; | 
|  | strcpy(dev->name, "pow%d"); | 
|  | for (qos = 0; qos < 16; qos++) | 
|  | skb_queue_head_init(&priv->tx_free_list[qos]); | 
|  |  | 
|  | if (register_netdev(dev) < 0) { | 
|  | pr_err("Failed to register ethernet device for POW\n"); | 
|  | free_netdev(dev); | 
|  | } else { | 
|  | cvm_oct_device[CVMX_PIP_NUM_INPUT_PORTS] = dev; | 
|  | pr_info("%s: POW send group %d, receive group %d\n", | 
|  | dev->name, pow_send_group, | 
|  | pow_receive_group); | 
|  | } | 
|  | } else { | 
|  | pr_err("Failed to allocate ethernet device for POW\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | num_interfaces = cvmx_helper_get_number_of_interfaces(); | 
|  | for (interface = 0; interface < num_interfaces; interface++) { | 
|  | cvmx_helper_interface_mode_t imode = | 
|  | cvmx_helper_interface_get_mode(interface); | 
|  | int num_ports = cvmx_helper_ports_on_interface(interface); | 
|  | int port; | 
|  |  | 
|  | for (port = cvmx_helper_get_ipd_port(interface, 0); | 
|  | port < cvmx_helper_get_ipd_port(interface, num_ports); | 
|  | port++) { | 
|  | struct octeon_ethernet *priv; | 
|  | struct net_device *dev = | 
|  | alloc_etherdev(sizeof(struct octeon_ethernet)); | 
|  | if (!dev) { | 
|  | pr_err("Failed to allocate ethernet device for port %d\n", port); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Initialize the device private structure. */ | 
|  | priv = netdev_priv(dev); | 
|  |  | 
|  | INIT_DELAYED_WORK(&priv->port_periodic_work, | 
|  | cvm_oct_periodic_worker); | 
|  | priv->imode = imode; | 
|  | priv->port = port; | 
|  | priv->queue = cvmx_pko_get_base_queue(priv->port); | 
|  | priv->fau = fau - cvmx_pko_get_num_queues(port) * 4; | 
|  | for (qos = 0; qos < 16; qos++) | 
|  | skb_queue_head_init(&priv->tx_free_list[qos]); | 
|  | for (qos = 0; qos < cvmx_pko_get_num_queues(port); | 
|  | qos++) | 
|  | cvmx_fau_atomic_write32(priv->fau + qos * 4, 0); | 
|  |  | 
|  | switch (priv->imode) { | 
|  |  | 
|  | /* These types don't support ports to IPD/PKO */ | 
|  | case CVMX_HELPER_INTERFACE_MODE_DISABLED: | 
|  | case CVMX_HELPER_INTERFACE_MODE_PCIE: | 
|  | case CVMX_HELPER_INTERFACE_MODE_PICMG: | 
|  | break; | 
|  |  | 
|  | case CVMX_HELPER_INTERFACE_MODE_NPI: | 
|  | dev->netdev_ops = &cvm_oct_npi_netdev_ops; | 
|  | strcpy(dev->name, "npi%d"); | 
|  | break; | 
|  |  | 
|  | case CVMX_HELPER_INTERFACE_MODE_XAUI: | 
|  | dev->netdev_ops = &cvm_oct_xaui_netdev_ops; | 
|  | strcpy(dev->name, "xaui%d"); | 
|  | break; | 
|  |  | 
|  | case CVMX_HELPER_INTERFACE_MODE_LOOP: | 
|  | dev->netdev_ops = &cvm_oct_npi_netdev_ops; | 
|  | strcpy(dev->name, "loop%d"); | 
|  | break; | 
|  |  | 
|  | case CVMX_HELPER_INTERFACE_MODE_SGMII: | 
|  | dev->netdev_ops = &cvm_oct_sgmii_netdev_ops; | 
|  | strcpy(dev->name, "eth%d"); | 
|  | break; | 
|  |  | 
|  | case CVMX_HELPER_INTERFACE_MODE_SPI: | 
|  | dev->netdev_ops = &cvm_oct_spi_netdev_ops; | 
|  | strcpy(dev->name, "spi%d"); | 
|  | break; | 
|  |  | 
|  | case CVMX_HELPER_INTERFACE_MODE_RGMII: | 
|  | case CVMX_HELPER_INTERFACE_MODE_GMII: | 
|  | dev->netdev_ops = &cvm_oct_rgmii_netdev_ops; | 
|  | strcpy(dev->name, "eth%d"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!dev->netdev_ops) { | 
|  | free_netdev(dev); | 
|  | } else if (register_netdev(dev) < 0) { | 
|  | pr_err("Failed to register ethernet device " | 
|  | "for interface %d, port %d\n", | 
|  | interface, priv->port); | 
|  | free_netdev(dev); | 
|  | } else { | 
|  | cvm_oct_device[priv->port] = dev; | 
|  | fau -= | 
|  | cvmx_pko_get_num_queues(priv->port) * | 
|  | sizeof(uint32_t); | 
|  | queue_delayed_work(cvm_oct_poll_queue, | 
|  | &priv->port_periodic_work, HZ); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | cvm_oct_tx_initialize(); | 
|  | cvm_oct_rx_initialize(); | 
|  |  | 
|  | /* | 
|  | * 150 uS: about 10 1500-byte packtes at 1GE. | 
|  | */ | 
|  | cvm_oct_tx_poll_interval = 150 * (octeon_get_clock_rate() / 1000000); | 
|  |  | 
|  | queue_delayed_work(cvm_oct_poll_queue, &cvm_oct_rx_refill_work, HZ); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit cvm_oct_cleanup_module(void) | 
|  | { | 
|  | int port; | 
|  |  | 
|  | /* Disable POW interrupt */ | 
|  | cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group), 0); | 
|  |  | 
|  | cvmx_ipd_disable(); | 
|  |  | 
|  | /* Free the interrupt handler */ | 
|  | free_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group, cvm_oct_device); | 
|  |  | 
|  | atomic_inc_return(&cvm_oct_poll_queue_stopping); | 
|  | cancel_delayed_work_sync(&cvm_oct_rx_refill_work); | 
|  |  | 
|  | cvm_oct_rx_shutdown(); | 
|  | cvm_oct_tx_shutdown(); | 
|  |  | 
|  | cvmx_pko_disable(); | 
|  |  | 
|  | /* Free the ethernet devices */ | 
|  | for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) { | 
|  | if (cvm_oct_device[port]) { | 
|  | struct net_device *dev = cvm_oct_device[port]; | 
|  | struct octeon_ethernet *priv = netdev_priv(dev); | 
|  | cancel_delayed_work_sync(&priv->port_periodic_work); | 
|  |  | 
|  | cvm_oct_tx_shutdown_dev(dev); | 
|  | unregister_netdev(dev); | 
|  | free_netdev(dev); | 
|  | cvm_oct_device[port] = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | destroy_workqueue(cvm_oct_poll_queue); | 
|  |  | 
|  | cvmx_pko_shutdown(); | 
|  |  | 
|  | cvmx_ipd_free_ptr(); | 
|  |  | 
|  | /* Free the HW pools */ | 
|  | cvm_oct_mem_empty_fpa(CVMX_FPA_PACKET_POOL, CVMX_FPA_PACKET_POOL_SIZE, | 
|  | num_packet_buffers); | 
|  | cvm_oct_mem_empty_fpa(CVMX_FPA_WQE_POOL, CVMX_FPA_WQE_POOL_SIZE, | 
|  | num_packet_buffers); | 
|  | if (CVMX_FPA_OUTPUT_BUFFER_POOL != CVMX_FPA_PACKET_POOL) | 
|  | cvm_oct_mem_empty_fpa(CVMX_FPA_OUTPUT_BUFFER_POOL, | 
|  | CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE, 128); | 
|  | } | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Cavium Networks <support@caviumnetworks.com>"); | 
|  | MODULE_DESCRIPTION("Cavium Networks Octeon ethernet driver."); | 
|  | module_init(cvm_oct_init_module); | 
|  | module_exit(cvm_oct_cleanup_module); |