| /* | |
| * Copyright 2002-2005, Instant802 Networks, Inc. | |
| * Copyright 2005-2006, Devicescape Software, Inc. | |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> | |
| * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * | |
| * Transmit and frame generation functions. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/bitmap.h> | |
| #include <linux/rcupdate.h> | |
| #include <net/net_namespace.h> | |
| #include <net/ieee80211_radiotap.h> | |
| #include <net/cfg80211.h> | |
| #include <net/mac80211.h> | |
| #include <asm/unaligned.h> | |
| #include "ieee80211_i.h" | |
| #include "led.h" | |
| #include "mesh.h" | |
| #include "wep.h" | |
| #include "wpa.h" | |
| #include "wme.h" | |
| #include "rate.h" | |
| #define IEEE80211_TX_OK 0 | |
| #define IEEE80211_TX_AGAIN 1 | |
| #define IEEE80211_TX_FRAG_AGAIN 2 | |
| /* misc utils */ | |
| static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, int group_addr, | |
| int next_frag_len) | |
| { | |
| int rate, mrate, erp, dur, i; | |
| struct ieee80211_rate *txrate; | |
| struct ieee80211_local *local = tx->local; | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_hdr *hdr; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| /* assume HW handles this */ | |
| if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS) | |
| return 0; | |
| /* uh huh? */ | |
| if (WARN_ON_ONCE(info->control.rates[0].idx < 0)) | |
| return 0; | |
| sband = local->hw.wiphy->bands[tx->channel->band]; | |
| txrate = &sband->bitrates[info->control.rates[0].idx]; | |
| erp = txrate->flags & IEEE80211_RATE_ERP_G; | |
| /* | |
| * data and mgmt (except PS Poll): | |
| * - during CFP: 32768 | |
| * - during contention period: | |
| * if addr1 is group address: 0 | |
| * if more fragments = 0 and addr1 is individual address: time to | |
| * transmit one ACK plus SIFS | |
| * if more fragments = 1 and addr1 is individual address: time to | |
| * transmit next fragment plus 2 x ACK plus 3 x SIFS | |
| * | |
| * IEEE 802.11, 9.6: | |
| * - control response frame (CTS or ACK) shall be transmitted using the | |
| * same rate as the immediately previous frame in the frame exchange | |
| * sequence, if this rate belongs to the PHY mandatory rates, or else | |
| * at the highest possible rate belonging to the PHY rates in the | |
| * BSSBasicRateSet | |
| */ | |
| hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| if (ieee80211_is_ctl(hdr->frame_control)) { | |
| /* TODO: These control frames are not currently sent by | |
| * mac80211, but should they be implemented, this function | |
| * needs to be updated to support duration field calculation. | |
| * | |
| * RTS: time needed to transmit pending data/mgmt frame plus | |
| * one CTS frame plus one ACK frame plus 3 x SIFS | |
| * CTS: duration of immediately previous RTS minus time | |
| * required to transmit CTS and its SIFS | |
| * ACK: 0 if immediately previous directed data/mgmt had | |
| * more=0, with more=1 duration in ACK frame is duration | |
| * from previous frame minus time needed to transmit ACK | |
| * and its SIFS | |
| * PS Poll: BIT(15) | BIT(14) | aid | |
| */ | |
| return 0; | |
| } | |
| /* data/mgmt */ | |
| if (0 /* FIX: data/mgmt during CFP */) | |
| return cpu_to_le16(32768); | |
| if (group_addr) /* Group address as the destination - no ACK */ | |
| return 0; | |
| /* Individual destination address: | |
| * IEEE 802.11, Ch. 9.6 (after IEEE 802.11g changes) | |
| * CTS and ACK frames shall be transmitted using the highest rate in | |
| * basic rate set that is less than or equal to the rate of the | |
| * immediately previous frame and that is using the same modulation | |
| * (CCK or OFDM). If no basic rate set matches with these requirements, | |
| * the highest mandatory rate of the PHY that is less than or equal to | |
| * the rate of the previous frame is used. | |
| * Mandatory rates for IEEE 802.11g PHY: 1, 2, 5.5, 11, 6, 12, 24 Mbps | |
| */ | |
| rate = -1; | |
| /* use lowest available if everything fails */ | |
| mrate = sband->bitrates[0].bitrate; | |
| for (i = 0; i < sband->n_bitrates; i++) { | |
| struct ieee80211_rate *r = &sband->bitrates[i]; | |
| if (r->bitrate > txrate->bitrate) | |
| break; | |
| if (tx->sdata->vif.bss_conf.basic_rates & BIT(i)) | |
| rate = r->bitrate; | |
| switch (sband->band) { | |
| case IEEE80211_BAND_2GHZ: { | |
| u32 flag; | |
| if (tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) | |
| flag = IEEE80211_RATE_MANDATORY_G; | |
| else | |
| flag = IEEE80211_RATE_MANDATORY_B; | |
| if (r->flags & flag) | |
| mrate = r->bitrate; | |
| break; | |
| } | |
| case IEEE80211_BAND_5GHZ: | |
| if (r->flags & IEEE80211_RATE_MANDATORY_A) | |
| mrate = r->bitrate; | |
| break; | |
| case IEEE80211_NUM_BANDS: | |
| WARN_ON(1); | |
| break; | |
| } | |
| } | |
| if (rate == -1) { | |
| /* No matching basic rate found; use highest suitable mandatory | |
| * PHY rate */ | |
| rate = mrate; | |
| } | |
| /* Time needed to transmit ACK | |
| * (10 bytes + 4-byte FCS = 112 bits) plus SIFS; rounded up | |
| * to closest integer */ | |
| dur = ieee80211_frame_duration(local, 10, rate, erp, | |
| tx->sdata->vif.bss_conf.use_short_preamble); | |
| if (next_frag_len) { | |
| /* Frame is fragmented: duration increases with time needed to | |
| * transmit next fragment plus ACK and 2 x SIFS. */ | |
| dur *= 2; /* ACK + SIFS */ | |
| /* next fragment */ | |
| dur += ieee80211_frame_duration(local, next_frag_len, | |
| txrate->bitrate, erp, | |
| tx->sdata->vif.bss_conf.use_short_preamble); | |
| } | |
| return cpu_to_le16(dur); | |
| } | |
| static int inline is_ieee80211_device(struct ieee80211_local *local, | |
| struct net_device *dev) | |
| { | |
| return local == wdev_priv(dev->ieee80211_ptr); | |
| } | |
| /* tx handlers */ | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| u32 sta_flags; | |
| if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED)) | |
| return TX_CONTINUE; | |
| if (unlikely(tx->local->sw_scanning) && | |
| !ieee80211_is_probe_req(hdr->frame_control)) | |
| return TX_DROP; | |
| if (tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT) | |
| return TX_CONTINUE; | |
| if (tx->flags & IEEE80211_TX_PS_BUFFERED) | |
| return TX_CONTINUE; | |
| sta_flags = tx->sta ? get_sta_flags(tx->sta) : 0; | |
| if (likely(tx->flags & IEEE80211_TX_UNICAST)) { | |
| if (unlikely(!(sta_flags & WLAN_STA_ASSOC) && | |
| tx->sdata->vif.type != NL80211_IFTYPE_ADHOC && | |
| ieee80211_is_data(hdr->frame_control))) { | |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | |
| printk(KERN_DEBUG "%s: dropped data frame to not " | |
| "associated station %pM\n", | |
| tx->dev->name, hdr->addr1); | |
| #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ | |
| I802_DEBUG_INC(tx->local->tx_handlers_drop_not_assoc); | |
| return TX_DROP; | |
| } | |
| } else { | |
| if (unlikely(ieee80211_is_data(hdr->frame_control) && | |
| tx->local->num_sta == 0 && | |
| tx->sdata->vif.type != NL80211_IFTYPE_ADHOC)) { | |
| /* | |
| * No associated STAs - no need to send multicast | |
| * frames. | |
| */ | |
| return TX_DROP; | |
| } | |
| return TX_CONTINUE; | |
| } | |
| return TX_CONTINUE; | |
| } | |
| /* This function is called whenever the AP is about to exceed the maximum limit | |
| * of buffered frames for power saving STAs. This situation should not really | |
| * happen often during normal operation, so dropping the oldest buffered packet | |
| * from each queue should be OK to make some room for new frames. */ | |
| static void purge_old_ps_buffers(struct ieee80211_local *local) | |
| { | |
| int total = 0, purged = 0; | |
| struct sk_buff *skb; | |
| struct ieee80211_sub_if_data *sdata; | |
| struct sta_info *sta; | |
| /* | |
| * virtual interfaces are protected by RCU | |
| */ | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(sdata, &local->interfaces, list) { | |
| struct ieee80211_if_ap *ap; | |
| if (sdata->vif.type != NL80211_IFTYPE_AP) | |
| continue; | |
| ap = &sdata->u.ap; | |
| skb = skb_dequeue(&ap->ps_bc_buf); | |
| if (skb) { | |
| purged++; | |
| dev_kfree_skb(skb); | |
| } | |
| total += skb_queue_len(&ap->ps_bc_buf); | |
| } | |
| list_for_each_entry_rcu(sta, &local->sta_list, list) { | |
| skb = skb_dequeue(&sta->ps_tx_buf); | |
| if (skb) { | |
| purged++; | |
| dev_kfree_skb(skb); | |
| } | |
| total += skb_queue_len(&sta->ps_tx_buf); | |
| } | |
| rcu_read_unlock(); | |
| local->total_ps_buffered = total; | |
| #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | |
| printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n", | |
| wiphy_name(local->hw.wiphy), purged); | |
| #endif | |
| } | |
| static ieee80211_tx_result | |
| ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| /* | |
| * broadcast/multicast frame | |
| * | |
| * If any of the associated stations is in power save mode, | |
| * the frame is buffered to be sent after DTIM beacon frame. | |
| * This is done either by the hardware or us. | |
| */ | |
| /* powersaving STAs only in AP/VLAN mode */ | |
| if (!tx->sdata->bss) | |
| return TX_CONTINUE; | |
| /* no buffering for ordered frames */ | |
| if (ieee80211_has_order(hdr->frame_control)) | |
| return TX_CONTINUE; | |
| /* no stations in PS mode */ | |
| if (!atomic_read(&tx->sdata->bss->num_sta_ps)) | |
| return TX_CONTINUE; | |
| /* buffered in mac80211 */ | |
| if (tx->local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING) { | |
| if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) | |
| purge_old_ps_buffers(tx->local); | |
| if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >= | |
| AP_MAX_BC_BUFFER) { | |
| #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | |
| if (net_ratelimit()) { | |
| printk(KERN_DEBUG "%s: BC TX buffer full - " | |
| "dropping the oldest frame\n", | |
| tx->dev->name); | |
| } | |
| #endif | |
| dev_kfree_skb(skb_dequeue(&tx->sdata->bss->ps_bc_buf)); | |
| } else | |
| tx->local->total_ps_buffered++; | |
| skb_queue_tail(&tx->sdata->bss->ps_bc_buf, tx->skb); | |
| return TX_QUEUED; | |
| } | |
| /* buffered in hardware */ | |
| info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM; | |
| return TX_CONTINUE; | |
| } | |
| static ieee80211_tx_result | |
| ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) | |
| { | |
| struct sta_info *sta = tx->sta; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| u32 staflags; | |
| if (unlikely(!sta || ieee80211_is_probe_resp(hdr->frame_control))) | |
| return TX_CONTINUE; | |
| staflags = get_sta_flags(sta); | |
| if (unlikely((staflags & WLAN_STA_PS) && | |
| !(staflags & WLAN_STA_PSPOLL))) { | |
| #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | |
| printk(KERN_DEBUG "STA %pM aid %d: PS buffer (entries " | |
| "before %d)\n", | |
| sta->sta.addr, sta->sta.aid, | |
| skb_queue_len(&sta->ps_tx_buf)); | |
| #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | |
| if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) | |
| purge_old_ps_buffers(tx->local); | |
| if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) { | |
| struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf); | |
| #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | |
| if (net_ratelimit()) { | |
| printk(KERN_DEBUG "%s: STA %pM TX " | |
| "buffer full - dropping oldest frame\n", | |
| tx->dev->name, sta->sta.addr); | |
| } | |
| #endif | |
| dev_kfree_skb(old); | |
| } else | |
| tx->local->total_ps_buffered++; | |
| /* Queue frame to be sent after STA sends an PS Poll frame */ | |
| if (skb_queue_empty(&sta->ps_tx_buf)) | |
| sta_info_set_tim_bit(sta); | |
| info->control.jiffies = jiffies; | |
| skb_queue_tail(&sta->ps_tx_buf, tx->skb); | |
| return TX_QUEUED; | |
| } | |
| #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | |
| else if (unlikely(test_sta_flags(sta, WLAN_STA_PS))) { | |
| printk(KERN_DEBUG "%s: STA %pM in PS mode, but pspoll " | |
| "set -> send frame\n", tx->dev->name, | |
| sta->sta.addr); | |
| } | |
| #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | |
| clear_sta_flags(sta, WLAN_STA_PSPOLL); | |
| return TX_CONTINUE; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_ps_buf(struct ieee80211_tx_data *tx) | |
| { | |
| if (unlikely(tx->flags & IEEE80211_TX_PS_BUFFERED)) | |
| return TX_CONTINUE; | |
| if (tx->flags & IEEE80211_TX_UNICAST) | |
| return ieee80211_tx_h_unicast_ps_buf(tx); | |
| else | |
| return ieee80211_tx_h_multicast_ps_buf(tx); | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_key *key; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| if (unlikely(tx->skb->do_not_encrypt)) | |
| tx->key = NULL; | |
| else if (tx->sta && (key = rcu_dereference(tx->sta->key))) | |
| tx->key = key; | |
| else if ((key = rcu_dereference(tx->sdata->default_key))) | |
| tx->key = key; | |
| else if (tx->sdata->drop_unencrypted && | |
| (tx->skb->protocol != cpu_to_be16(ETH_P_PAE)) && | |
| !(info->flags & IEEE80211_TX_CTL_INJECTED)) { | |
| I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted); | |
| return TX_DROP; | |
| } else | |
| tx->key = NULL; | |
| if (tx->key) { | |
| tx->key->tx_rx_count++; | |
| /* TODO: add threshold stuff again */ | |
| switch (tx->key->conf.alg) { | |
| case ALG_WEP: | |
| if (ieee80211_is_auth(hdr->frame_control)) | |
| break; | |
| case ALG_TKIP: | |
| case ALG_CCMP: | |
| if (!ieee80211_is_data_present(hdr->frame_control)) | |
| tx->key = NULL; | |
| break; | |
| } | |
| } | |
| if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) | |
| tx->skb->do_not_encrypt = 1; | |
| return TX_CONTINUE; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| struct ieee80211_hdr *hdr = (void *)tx->skb->data; | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_rate *rate; | |
| int i, len; | |
| bool inval = false, rts = false, short_preamble = false; | |
| struct ieee80211_tx_rate_control txrc; | |
| memset(&txrc, 0, sizeof(txrc)); | |
| sband = tx->local->hw.wiphy->bands[tx->channel->band]; | |
| len = min_t(int, tx->skb->len + FCS_LEN, | |
| tx->local->fragmentation_threshold); | |
| /* set up the tx rate control struct we give the RC algo */ | |
| txrc.hw = local_to_hw(tx->local); | |
| txrc.sband = sband; | |
| txrc.bss_conf = &tx->sdata->vif.bss_conf; | |
| txrc.skb = tx->skb; | |
| txrc.reported_rate.idx = -1; | |
| txrc.max_rate_idx = tx->sdata->max_ratectrl_rateidx; | |
| /* set up RTS protection if desired */ | |
| if (tx->local->rts_threshold < IEEE80211_MAX_RTS_THRESHOLD && | |
| len > tx->local->rts_threshold) { | |
| txrc.rts = rts = true; | |
| } | |
| /* | |
| * Use short preamble if the BSS can handle it, but not for | |
| * management frames unless we know the receiver can handle | |
| * that -- the management frame might be to a station that | |
| * just wants a probe response. | |
| */ | |
| if (tx->sdata->vif.bss_conf.use_short_preamble && | |
| (ieee80211_is_data(hdr->frame_control) || | |
| (tx->sta && test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE)))) | |
| txrc.short_preamble = short_preamble = true; | |
| rate_control_get_rate(tx->sdata, tx->sta, &txrc); | |
| if (unlikely(info->control.rates[0].idx < 0)) | |
| return TX_DROP; | |
| if (txrc.reported_rate.idx < 0) | |
| txrc.reported_rate = info->control.rates[0]; | |
| if (tx->sta) | |
| tx->sta->last_tx_rate = txrc.reported_rate; | |
| if (unlikely(!info->control.rates[0].count)) | |
| info->control.rates[0].count = 1; | |
| if (is_multicast_ether_addr(hdr->addr1)) { | |
| /* | |
| * XXX: verify the rate is in the basic rateset | |
| */ | |
| return TX_CONTINUE; | |
| } | |
| /* | |
| * set up the RTS/CTS rate as the fastest basic rate | |
| * that is not faster than the data rate | |
| * | |
| * XXX: Should this check all retry rates? | |
| */ | |
| if (!(info->control.rates[0].flags & IEEE80211_TX_RC_MCS)) { | |
| s8 baserate = 0; | |
| rate = &sband->bitrates[info->control.rates[0].idx]; | |
| for (i = 0; i < sband->n_bitrates; i++) { | |
| /* must be a basic rate */ | |
| if (!(tx->sdata->vif.bss_conf.basic_rates & BIT(i))) | |
| continue; | |
| /* must not be faster than the data rate */ | |
| if (sband->bitrates[i].bitrate > rate->bitrate) | |
| continue; | |
| /* maximum */ | |
| if (sband->bitrates[baserate].bitrate < | |
| sband->bitrates[i].bitrate) | |
| baserate = i; | |
| } | |
| info->control.rts_cts_rate_idx = baserate; | |
| } | |
| for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { | |
| /* | |
| * make sure there's no valid rate following | |
| * an invalid one, just in case drivers don't | |
| * take the API seriously to stop at -1. | |
| */ | |
| if (inval) { | |
| info->control.rates[i].idx = -1; | |
| continue; | |
| } | |
| if (info->control.rates[i].idx < 0) { | |
| inval = true; | |
| continue; | |
| } | |
| /* | |
| * For now assume MCS is already set up correctly, this | |
| * needs to be fixed. | |
| */ | |
| if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS) { | |
| WARN_ON(info->control.rates[i].idx > 76); | |
| continue; | |
| } | |
| /* set up RTS protection if desired */ | |
| if (rts) | |
| info->control.rates[i].flags |= | |
| IEEE80211_TX_RC_USE_RTS_CTS; | |
| /* RC is busted */ | |
| if (WARN_ON_ONCE(info->control.rates[i].idx >= | |
| sband->n_bitrates)) { | |
| info->control.rates[i].idx = -1; | |
| continue; | |
| } | |
| rate = &sband->bitrates[info->control.rates[i].idx]; | |
| /* set up short preamble */ | |
| if (short_preamble && | |
| rate->flags & IEEE80211_RATE_SHORT_PREAMBLE) | |
| info->control.rates[i].flags |= | |
| IEEE80211_TX_RC_USE_SHORT_PREAMBLE; | |
| /* set up G protection */ | |
| if (!rts && tx->sdata->vif.bss_conf.use_cts_prot && | |
| rate->flags & IEEE80211_RATE_ERP_G) | |
| info->control.rates[i].flags |= | |
| IEEE80211_TX_RC_USE_CTS_PROTECT; | |
| } | |
| return TX_CONTINUE; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_misc(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| if (tx->sta) | |
| info->control.sta = &tx->sta->sta; | |
| return TX_CONTINUE; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| u16 *seq; | |
| u8 *qc; | |
| int tid; | |
| /* | |
| * Packet injection may want to control the sequence | |
| * number, if we have no matching interface then we | |
| * neither assign one ourselves nor ask the driver to. | |
| */ | |
| if (unlikely(!info->control.vif)) | |
| return TX_CONTINUE; | |
| if (unlikely(ieee80211_is_ctl(hdr->frame_control))) | |
| return TX_CONTINUE; | |
| if (ieee80211_hdrlen(hdr->frame_control) < 24) | |
| return TX_CONTINUE; | |
| /* | |
| * Anything but QoS data that has a sequence number field | |
| * (is long enough) gets a sequence number from the global | |
| * counter. | |
| */ | |
| if (!ieee80211_is_data_qos(hdr->frame_control)) { | |
| /* driver should assign sequence number */ | |
| info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; | |
| /* for pure STA mode without beacons, we can do it */ | |
| hdr->seq_ctrl = cpu_to_le16(tx->sdata->sequence_number); | |
| tx->sdata->sequence_number += 0x10; | |
| tx->sdata->sequence_number &= IEEE80211_SCTL_SEQ; | |
| return TX_CONTINUE; | |
| } | |
| /* | |
| * This should be true for injected/management frames only, for | |
| * management frames we have set the IEEE80211_TX_CTL_ASSIGN_SEQ | |
| * above since they are not QoS-data frames. | |
| */ | |
| if (!tx->sta) | |
| return TX_CONTINUE; | |
| /* include per-STA, per-TID sequence counter */ | |
| qc = ieee80211_get_qos_ctl(hdr); | |
| tid = *qc & IEEE80211_QOS_CTL_TID_MASK; | |
| seq = &tx->sta->tid_seq[tid]; | |
| hdr->seq_ctrl = cpu_to_le16(*seq); | |
| /* Increase the sequence number. */ | |
| *seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ; | |
| return TX_CONTINUE; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| size_t hdrlen, per_fragm, num_fragm, payload_len, left; | |
| struct sk_buff **frags, *first, *frag; | |
| int i; | |
| u16 seq; | |
| u8 *pos; | |
| int frag_threshold = tx->local->fragmentation_threshold; | |
| if (!(tx->flags & IEEE80211_TX_FRAGMENTED)) | |
| return TX_CONTINUE; | |
| /* | |
| * Warn when submitting a fragmented A-MPDU frame and drop it. | |
| * This scenario is handled in __ieee80211_tx_prepare but extra | |
| * caution taken here as fragmented ampdu may cause Tx stop. | |
| */ | |
| if (WARN_ON(info->flags & IEEE80211_TX_CTL_AMPDU)) | |
| return TX_DROP; | |
| first = tx->skb; | |
| hdrlen = ieee80211_hdrlen(hdr->frame_control); | |
| payload_len = first->len - hdrlen; | |
| per_fragm = frag_threshold - hdrlen - FCS_LEN; | |
| num_fragm = DIV_ROUND_UP(payload_len, per_fragm); | |
| frags = kzalloc(num_fragm * sizeof(struct sk_buff *), GFP_ATOMIC); | |
| if (!frags) | |
| goto fail; | |
| hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREFRAGS); | |
| seq = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ; | |
| pos = first->data + hdrlen + per_fragm; | |
| left = payload_len - per_fragm; | |
| for (i = 0; i < num_fragm - 1; i++) { | |
| struct ieee80211_hdr *fhdr; | |
| size_t copylen; | |
| if (left <= 0) | |
| goto fail; | |
| /* reserve enough extra head and tail room for possible | |
| * encryption */ | |
| frag = frags[i] = | |
| dev_alloc_skb(tx->local->tx_headroom + | |
| frag_threshold + | |
| IEEE80211_ENCRYPT_HEADROOM + | |
| IEEE80211_ENCRYPT_TAILROOM); | |
| if (!frag) | |
| goto fail; | |
| /* Make sure that all fragments use the same priority so | |
| * that they end up using the same TX queue */ | |
| frag->priority = first->priority; | |
| skb_reserve(frag, tx->local->tx_headroom + | |
| IEEE80211_ENCRYPT_HEADROOM); | |
| /* copy TX information */ | |
| info = IEEE80211_SKB_CB(frag); | |
| memcpy(info, first->cb, sizeof(frag->cb)); | |
| /* copy/fill in 802.11 header */ | |
| fhdr = (struct ieee80211_hdr *) skb_put(frag, hdrlen); | |
| memcpy(fhdr, first->data, hdrlen); | |
| fhdr->seq_ctrl = cpu_to_le16(seq | ((i + 1) & IEEE80211_SCTL_FRAG)); | |
| if (i == num_fragm - 2) { | |
| /* clear MOREFRAGS bit for the last fragment */ | |
| fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS); | |
| } else { | |
| /* | |
| * No multi-rate retries for fragmented frames, that | |
| * would completely throw off the NAV at other STAs. | |
| */ | |
| info->control.rates[1].idx = -1; | |
| info->control.rates[2].idx = -1; | |
| info->control.rates[3].idx = -1; | |
| info->control.rates[4].idx = -1; | |
| BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 5); | |
| info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; | |
| } | |
| /* copy data */ | |
| copylen = left > per_fragm ? per_fragm : left; | |
| memcpy(skb_put(frag, copylen), pos, copylen); | |
| skb_copy_queue_mapping(frag, first); | |
| frag->do_not_encrypt = first->do_not_encrypt; | |
| pos += copylen; | |
| left -= copylen; | |
| } | |
| skb_trim(first, hdrlen + per_fragm); | |
| tx->num_extra_frag = num_fragm - 1; | |
| tx->extra_frag = frags; | |
| return TX_CONTINUE; | |
| fail: | |
| if (frags) { | |
| for (i = 0; i < num_fragm - 1; i++) | |
| if (frags[i]) | |
| dev_kfree_skb(frags[i]); | |
| kfree(frags); | |
| } | |
| I802_DEBUG_INC(tx->local->tx_handlers_drop_fragment); | |
| return TX_DROP; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_encrypt(struct ieee80211_tx_data *tx) | |
| { | |
| if (!tx->key) | |
| return TX_CONTINUE; | |
| switch (tx->key->conf.alg) { | |
| case ALG_WEP: | |
| return ieee80211_crypto_wep_encrypt(tx); | |
| case ALG_TKIP: | |
| return ieee80211_crypto_tkip_encrypt(tx); | |
| case ALG_CCMP: | |
| return ieee80211_crypto_ccmp_encrypt(tx); | |
| } | |
| /* not reached */ | |
| WARN_ON(1); | |
| return TX_DROP; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| int next_len, i; | |
| int group_addr = is_multicast_ether_addr(hdr->addr1); | |
| if (!(tx->flags & IEEE80211_TX_FRAGMENTED)) { | |
| hdr->duration_id = ieee80211_duration(tx, group_addr, 0); | |
| return TX_CONTINUE; | |
| } | |
| hdr->duration_id = ieee80211_duration(tx, group_addr, | |
| tx->extra_frag[0]->len); | |
| for (i = 0; i < tx->num_extra_frag; i++) { | |
| if (i + 1 < tx->num_extra_frag) | |
| next_len = tx->extra_frag[i + 1]->len; | |
| else | |
| next_len = 0; | |
| hdr = (struct ieee80211_hdr *)tx->extra_frag[i]->data; | |
| hdr->duration_id = ieee80211_duration(tx, 0, next_len); | |
| } | |
| return TX_CONTINUE; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_stats(struct ieee80211_tx_data *tx) | |
| { | |
| int i; | |
| if (!tx->sta) | |
| return TX_CONTINUE; | |
| tx->sta->tx_packets++; | |
| tx->sta->tx_fragments++; | |
| tx->sta->tx_bytes += tx->skb->len; | |
| if (tx->extra_frag) { | |
| tx->sta->tx_fragments += tx->num_extra_frag; | |
| for (i = 0; i < tx->num_extra_frag; i++) | |
| tx->sta->tx_bytes += tx->extra_frag[i]->len; | |
| } | |
| return TX_CONTINUE; | |
| } | |
| /* actual transmit path */ | |
| /* | |
| * deal with packet injection down monitor interface | |
| * with Radiotap Header -- only called for monitor mode interface | |
| */ | |
| static ieee80211_tx_result | |
| __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx, | |
| struct sk_buff *skb) | |
| { | |
| /* | |
| * this is the moment to interpret and discard the radiotap header that | |
| * must be at the start of the packet injected in Monitor mode | |
| * | |
| * Need to take some care with endian-ness since radiotap | |
| * args are little-endian | |
| */ | |
| struct ieee80211_radiotap_iterator iterator; | |
| struct ieee80211_radiotap_header *rthdr = | |
| (struct ieee80211_radiotap_header *) skb->data; | |
| struct ieee80211_supported_band *sband; | |
| int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len); | |
| sband = tx->local->hw.wiphy->bands[tx->channel->band]; | |
| skb->do_not_encrypt = 1; | |
| tx->flags &= ~IEEE80211_TX_FRAGMENTED; | |
| /* | |
| * for every radiotap entry that is present | |
| * (ieee80211_radiotap_iterator_next returns -ENOENT when no more | |
| * entries present, or -EINVAL on error) | |
| */ | |
| while (!ret) { | |
| ret = ieee80211_radiotap_iterator_next(&iterator); | |
| if (ret) | |
| continue; | |
| /* see if this argument is something we can use */ | |
| switch (iterator.this_arg_index) { | |
| /* | |
| * You must take care when dereferencing iterator.this_arg | |
| * for multibyte types... the pointer is not aligned. Use | |
| * get_unaligned((type *)iterator.this_arg) to dereference | |
| * iterator.this_arg for type "type" safely on all arches. | |
| */ | |
| case IEEE80211_RADIOTAP_FLAGS: | |
| if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) { | |
| /* | |
| * this indicates that the skb we have been | |
| * handed has the 32-bit FCS CRC at the end... | |
| * we should react to that by snipping it off | |
| * because it will be recomputed and added | |
| * on transmission | |
| */ | |
| if (skb->len < (iterator.max_length + FCS_LEN)) | |
| return TX_DROP; | |
| skb_trim(skb, skb->len - FCS_LEN); | |
| } | |
| if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP) | |
| tx->skb->do_not_encrypt = 0; | |
| if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG) | |
| tx->flags |= IEEE80211_TX_FRAGMENTED; | |
| break; | |
| /* | |
| * Please update the file | |
| * Documentation/networking/mac80211-injection.txt | |
| * when parsing new fields here. | |
| */ | |
| default: | |
| break; | |
| } | |
| } | |
| if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */ | |
| return TX_DROP; | |
| /* | |
| * remove the radiotap header | |
| * iterator->max_length was sanity-checked against | |
| * skb->len by iterator init | |
| */ | |
| skb_pull(skb, iterator.max_length); | |
| return TX_CONTINUE; | |
| } | |
| /* | |
| * initialises @tx | |
| */ | |
| static ieee80211_tx_result | |
| __ieee80211_tx_prepare(struct ieee80211_tx_data *tx, | |
| struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | |
| struct ieee80211_hdr *hdr; | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| int hdrlen, tid; | |
| u8 *qc, *state; | |
| memset(tx, 0, sizeof(*tx)); | |
| tx->skb = skb; | |
| tx->dev = dev; /* use original interface */ | |
| tx->local = local; | |
| tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| tx->channel = local->hw.conf.channel; | |
| /* | |
| * Set this flag (used below to indicate "automatic fragmentation"), | |
| * it will be cleared/left by radiotap as desired. | |
| */ | |
| tx->flags |= IEEE80211_TX_FRAGMENTED; | |
| /* process and remove the injection radiotap header */ | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED)) { | |
| if (__ieee80211_parse_tx_radiotap(tx, skb) == TX_DROP) | |
| return TX_DROP; | |
| /* | |
| * __ieee80211_parse_tx_radiotap has now removed | |
| * the radiotap header that was present and pre-filled | |
| * 'tx' with tx control information. | |
| */ | |
| } | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| tx->sta = sta_info_get(local, hdr->addr1); | |
| if (tx->sta && ieee80211_is_data_qos(hdr->frame_control)) { | |
| qc = ieee80211_get_qos_ctl(hdr); | |
| tid = *qc & IEEE80211_QOS_CTL_TID_MASK; | |
| state = &tx->sta->ampdu_mlme.tid_state_tx[tid]; | |
| if (*state == HT_AGG_STATE_OPERATIONAL) | |
| info->flags |= IEEE80211_TX_CTL_AMPDU; | |
| } | |
| if (is_multicast_ether_addr(hdr->addr1)) { | |
| tx->flags &= ~IEEE80211_TX_UNICAST; | |
| info->flags |= IEEE80211_TX_CTL_NO_ACK; | |
| } else { | |
| tx->flags |= IEEE80211_TX_UNICAST; | |
| info->flags &= ~IEEE80211_TX_CTL_NO_ACK; | |
| } | |
| if (tx->flags & IEEE80211_TX_FRAGMENTED) { | |
| if ((tx->flags & IEEE80211_TX_UNICAST) && | |
| skb->len + FCS_LEN > local->fragmentation_threshold && | |
| !(info->flags & IEEE80211_TX_CTL_AMPDU)) | |
| tx->flags |= IEEE80211_TX_FRAGMENTED; | |
| else | |
| tx->flags &= ~IEEE80211_TX_FRAGMENTED; | |
| } | |
| if (!tx->sta) | |
| info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; | |
| else if (test_and_clear_sta_flags(tx->sta, WLAN_STA_CLEAR_PS_FILT)) | |
| info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; | |
| hdrlen = ieee80211_hdrlen(hdr->frame_control); | |
| if (skb->len > hdrlen + sizeof(rfc1042_header) + 2) { | |
| u8 *pos = &skb->data[hdrlen + sizeof(rfc1042_header)]; | |
| tx->ethertype = (pos[0] << 8) | pos[1]; | |
| } | |
| info->flags |= IEEE80211_TX_CTL_FIRST_FRAGMENT; | |
| return TX_CONTINUE; | |
| } | |
| /* | |
| * NB: @tx is uninitialised when passed in here | |
| */ | |
| static int ieee80211_tx_prepare(struct ieee80211_local *local, | |
| struct ieee80211_tx_data *tx, | |
| struct sk_buff *skb) | |
| { | |
| struct net_device *dev; | |
| dev = dev_get_by_index(&init_net, skb->iif); | |
| if (unlikely(dev && !is_ieee80211_device(local, dev))) { | |
| dev_put(dev); | |
| dev = NULL; | |
| } | |
| if (unlikely(!dev)) | |
| return -ENODEV; | |
| /* initialises tx with control */ | |
| __ieee80211_tx_prepare(tx, skb, dev); | |
| dev_put(dev); | |
| return 0; | |
| } | |
| static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb, | |
| struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_tx_info *info; | |
| int ret, i; | |
| if (skb) { | |
| if (netif_subqueue_stopped(local->mdev, skb)) | |
| return IEEE80211_TX_AGAIN; | |
| info = IEEE80211_SKB_CB(skb); | |
| ret = local->ops->tx(local_to_hw(local), skb); | |
| if (ret) | |
| return IEEE80211_TX_AGAIN; | |
| local->mdev->trans_start = jiffies; | |
| ieee80211_led_tx(local, 1); | |
| } | |
| if (tx->extra_frag) { | |
| for (i = 0; i < tx->num_extra_frag; i++) { | |
| if (!tx->extra_frag[i]) | |
| continue; | |
| info = IEEE80211_SKB_CB(tx->extra_frag[i]); | |
| info->flags &= ~(IEEE80211_TX_CTL_CLEAR_PS_FILT | | |
| IEEE80211_TX_CTL_FIRST_FRAGMENT); | |
| if (netif_subqueue_stopped(local->mdev, | |
| tx->extra_frag[i])) | |
| return IEEE80211_TX_FRAG_AGAIN; | |
| ret = local->ops->tx(local_to_hw(local), | |
| tx->extra_frag[i]); | |
| if (ret) | |
| return IEEE80211_TX_FRAG_AGAIN; | |
| local->mdev->trans_start = jiffies; | |
| ieee80211_led_tx(local, 1); | |
| tx->extra_frag[i] = NULL; | |
| } | |
| kfree(tx->extra_frag); | |
| tx->extra_frag = NULL; | |
| } | |
| return IEEE80211_TX_OK; | |
| } | |
| /* | |
| * Invoke TX handlers, return 0 on success and non-zero if the | |
| * frame was dropped or queued. | |
| */ | |
| static int invoke_tx_handlers(struct ieee80211_tx_data *tx) | |
| { | |
| struct sk_buff *skb = tx->skb; | |
| ieee80211_tx_result res = TX_DROP; | |
| int i; | |
| #define CALL_TXH(txh) \ | |
| res = txh(tx); \ | |
| if (res != TX_CONTINUE) \ | |
| goto txh_done; | |
| CALL_TXH(ieee80211_tx_h_check_assoc) | |
| CALL_TXH(ieee80211_tx_h_ps_buf) | |
| CALL_TXH(ieee80211_tx_h_select_key) | |
| CALL_TXH(ieee80211_tx_h_michael_mic_add) | |
| CALL_TXH(ieee80211_tx_h_rate_ctrl) | |
| CALL_TXH(ieee80211_tx_h_misc) | |
| CALL_TXH(ieee80211_tx_h_sequence) | |
| CALL_TXH(ieee80211_tx_h_fragment) | |
| /* handlers after fragment must be aware of tx info fragmentation! */ | |
| CALL_TXH(ieee80211_tx_h_encrypt) | |
| CALL_TXH(ieee80211_tx_h_calculate_duration) | |
| CALL_TXH(ieee80211_tx_h_stats) | |
| #undef CALL_TXH | |
| txh_done: | |
| if (unlikely(res == TX_DROP)) { | |
| I802_DEBUG_INC(tx->local->tx_handlers_drop); | |
| dev_kfree_skb(skb); | |
| for (i = 0; i < tx->num_extra_frag; i++) | |
| if (tx->extra_frag[i]) | |
| dev_kfree_skb(tx->extra_frag[i]); | |
| kfree(tx->extra_frag); | |
| return -1; | |
| } else if (unlikely(res == TX_QUEUED)) { | |
| I802_DEBUG_INC(tx->local->tx_handlers_queued); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb) | |
| { | |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | |
| struct sta_info *sta; | |
| struct ieee80211_tx_data tx; | |
| ieee80211_tx_result res_prepare; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| int ret, i; | |
| u16 queue; | |
| queue = skb_get_queue_mapping(skb); | |
| WARN_ON(test_bit(queue, local->queues_pending)); | |
| if (unlikely(skb->len < 10)) { | |
| dev_kfree_skb(skb); | |
| return 0; | |
| } | |
| rcu_read_lock(); | |
| /* initialises tx */ | |
| res_prepare = __ieee80211_tx_prepare(&tx, skb, dev); | |
| if (res_prepare == TX_DROP) { | |
| dev_kfree_skb(skb); | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| sta = tx.sta; | |
| tx.channel = local->hw.conf.channel; | |
| info->band = tx.channel->band; | |
| if (invoke_tx_handlers(&tx)) | |
| goto out; | |
| retry: | |
| ret = __ieee80211_tx(local, skb, &tx); | |
| if (ret) { | |
| struct ieee80211_tx_stored_packet *store; | |
| /* | |
| * Since there are no fragmented frames on A-MPDU | |
| * queues, there's no reason for a driver to reject | |
| * a frame there, warn and drop it. | |
| */ | |
| if (WARN_ON(info->flags & IEEE80211_TX_CTL_AMPDU)) | |
| goto drop; | |
| store = &local->pending_packet[queue]; | |
| if (ret == IEEE80211_TX_FRAG_AGAIN) | |
| skb = NULL; | |
| set_bit(queue, local->queues_pending); | |
| smp_mb(); | |
| /* | |
| * When the driver gets out of buffers during sending of | |
| * fragments and calls ieee80211_stop_queue, the netif | |
| * subqueue is stopped. There is, however, a small window | |
| * in which the PENDING bit is not yet set. If a buffer | |
| * gets available in that window (i.e. driver calls | |
| * ieee80211_wake_queue), we would end up with ieee80211_tx | |
| * called with the PENDING bit still set. Prevent this by | |
| * continuing transmitting here when that situation is | |
| * possible to have happened. | |
| */ | |
| if (!__netif_subqueue_stopped(local->mdev, queue)) { | |
| clear_bit(queue, local->queues_pending); | |
| goto retry; | |
| } | |
| store->skb = skb; | |
| store->extra_frag = tx.extra_frag; | |
| store->num_extra_frag = tx.num_extra_frag; | |
| } | |
| out: | |
| rcu_read_unlock(); | |
| return 0; | |
| drop: | |
| if (skb) | |
| dev_kfree_skb(skb); | |
| for (i = 0; i < tx.num_extra_frag; i++) | |
| if (tx.extra_frag[i]) | |
| dev_kfree_skb(tx.extra_frag[i]); | |
| kfree(tx.extra_frag); | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| /* device xmit handlers */ | |
| static int ieee80211_skb_resize(struct ieee80211_local *local, | |
| struct sk_buff *skb, | |
| int head_need, bool may_encrypt) | |
| { | |
| int tail_need = 0; | |
| /* | |
| * This could be optimised, devices that do full hardware | |
| * crypto (including TKIP MMIC) need no tailroom... But we | |
| * have no drivers for such devices currently. | |
| */ | |
| if (may_encrypt) { | |
| tail_need = IEEE80211_ENCRYPT_TAILROOM; | |
| tail_need -= skb_tailroom(skb); | |
| tail_need = max_t(int, tail_need, 0); | |
| } | |
| if (head_need || tail_need) { | |
| /* Sorry. Can't account for this any more */ | |
| skb_orphan(skb); | |
| } | |
| if (skb_header_cloned(skb)) | |
| I802_DEBUG_INC(local->tx_expand_skb_head_cloned); | |
| else | |
| I802_DEBUG_INC(local->tx_expand_skb_head); | |
| if (pskb_expand_head(skb, head_need, tail_need, GFP_ATOMIC)) { | |
| printk(KERN_DEBUG "%s: failed to reallocate TX buffer\n", | |
| wiphy_name(local->hw.wiphy)); | |
| return -ENOMEM; | |
| } | |
| /* update truesize too */ | |
| skb->truesize += head_need + tail_need; | |
| return 0; | |
| } | |
| int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct ieee80211_master_priv *mpriv = netdev_priv(dev); | |
| struct ieee80211_local *local = mpriv->local; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | |
| struct net_device *odev = NULL; | |
| struct ieee80211_sub_if_data *osdata; | |
| int headroom; | |
| bool may_encrypt; | |
| enum { | |
| NOT_MONITOR, | |
| FOUND_SDATA, | |
| UNKNOWN_ADDRESS, | |
| } monitor_iface = NOT_MONITOR; | |
| int ret; | |
| if (skb->iif) | |
| odev = dev_get_by_index(&init_net, skb->iif); | |
| if (unlikely(odev && !is_ieee80211_device(local, odev))) { | |
| dev_put(odev); | |
| odev = NULL; | |
| } | |
| if (unlikely(!odev)) { | |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | |
| printk(KERN_DEBUG "%s: Discarded packet with nonexistent " | |
| "originating device\n", dev->name); | |
| #endif | |
| dev_kfree_skb(skb); | |
| return 0; | |
| } | |
| memset(info, 0, sizeof(*info)); | |
| info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; | |
| osdata = IEEE80211_DEV_TO_SUB_IF(odev); | |
| if (ieee80211_vif_is_mesh(&osdata->vif) && | |
| ieee80211_is_data(hdr->frame_control)) { | |
| if (is_multicast_ether_addr(hdr->addr3)) | |
| memcpy(hdr->addr1, hdr->addr3, ETH_ALEN); | |
| else | |
| if (mesh_nexthop_lookup(skb, osdata)) { | |
| dev_put(odev); | |
| return 0; | |
| } | |
| if (memcmp(odev->dev_addr, hdr->addr4, ETH_ALEN) != 0) | |
| IEEE80211_IFSTA_MESH_CTR_INC(&osdata->u.mesh, | |
| fwded_frames); | |
| } else if (unlikely(osdata->vif.type == NL80211_IFTYPE_MONITOR)) { | |
| struct ieee80211_sub_if_data *sdata; | |
| int hdrlen; | |
| u16 len_rthdr; | |
| info->flags |= IEEE80211_TX_CTL_INJECTED; | |
| monitor_iface = UNKNOWN_ADDRESS; | |
| len_rthdr = ieee80211_get_radiotap_len(skb->data); | |
| hdr = (struct ieee80211_hdr *)skb->data + len_rthdr; | |
| hdrlen = ieee80211_hdrlen(hdr->frame_control); | |
| /* check the header is complete in the frame */ | |
| if (likely(skb->len >= len_rthdr + hdrlen)) { | |
| /* | |
| * We process outgoing injected frames that have a | |
| * local address we handle as though they are our | |
| * own frames. | |
| * This code here isn't entirely correct, the local | |
| * MAC address is not necessarily enough to find | |
| * the interface to use; for that proper VLAN/WDS | |
| * support we will need a different mechanism. | |
| */ | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(sdata, &local->interfaces, | |
| list) { | |
| if (!netif_running(sdata->dev)) | |
| continue; | |
| if (sdata->vif.type != NL80211_IFTYPE_AP) | |
| continue; | |
| if (compare_ether_addr(sdata->dev->dev_addr, | |
| hdr->addr2)) { | |
| dev_hold(sdata->dev); | |
| dev_put(odev); | |
| osdata = sdata; | |
| odev = osdata->dev; | |
| skb->iif = sdata->dev->ifindex; | |
| monitor_iface = FOUND_SDATA; | |
| break; | |
| } | |
| } | |
| rcu_read_unlock(); | |
| } | |
| } | |
| may_encrypt = !skb->do_not_encrypt; | |
| headroom = osdata->local->tx_headroom; | |
| if (may_encrypt) | |
| headroom += IEEE80211_ENCRYPT_HEADROOM; | |
| headroom -= skb_headroom(skb); | |
| headroom = max_t(int, 0, headroom); | |
| if (ieee80211_skb_resize(osdata->local, skb, headroom, may_encrypt)) { | |
| dev_kfree_skb(skb); | |
| dev_put(odev); | |
| return 0; | |
| } | |
| if (osdata->vif.type == NL80211_IFTYPE_AP_VLAN) | |
| osdata = container_of(osdata->bss, | |
| struct ieee80211_sub_if_data, | |
| u.ap); | |
| if (likely(monitor_iface != UNKNOWN_ADDRESS)) | |
| info->control.vif = &osdata->vif; | |
| ret = ieee80211_tx(odev, skb); | |
| dev_put(odev); | |
| return ret; | |
| } | |
| int ieee80211_monitor_start_xmit(struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | |
| struct ieee80211_radiotap_header *prthdr = | |
| (struct ieee80211_radiotap_header *)skb->data; | |
| u16 len_rthdr; | |
| /* check for not even having the fixed radiotap header part */ | |
| if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header))) | |
| goto fail; /* too short to be possibly valid */ | |
| /* is it a header version we can trust to find length from? */ | |
| if (unlikely(prthdr->it_version)) | |
| goto fail; /* only version 0 is supported */ | |
| /* then there must be a radiotap header with a length we can use */ | |
| len_rthdr = ieee80211_get_radiotap_len(skb->data); | |
| /* does the skb contain enough to deliver on the alleged length? */ | |
| if (unlikely(skb->len < len_rthdr)) | |
| goto fail; /* skb too short for claimed rt header extent */ | |
| skb->dev = local->mdev; | |
| /* needed because we set skb device to master */ | |
| skb->iif = dev->ifindex; | |
| /* sometimes we do encrypt injected frames, will be fixed | |
| * up in radiotap parser if not wanted */ | |
| skb->do_not_encrypt = 0; | |
| /* | |
| * fix up the pointers accounting for the radiotap | |
| * header still being in there. We are being given | |
| * a precooked IEEE80211 header so no need for | |
| * normal processing | |
| */ | |
| skb_set_mac_header(skb, len_rthdr); | |
| /* | |
| * these are just fixed to the end of the rt area since we | |
| * don't have any better information and at this point, nobody cares | |
| */ | |
| skb_set_network_header(skb, len_rthdr); | |
| skb_set_transport_header(skb, len_rthdr); | |
| /* pass the radiotap header up to the next stage intact */ | |
| dev_queue_xmit(skb); | |
| return NETDEV_TX_OK; | |
| fail: | |
| dev_kfree_skb(skb); | |
| return NETDEV_TX_OK; /* meaning, we dealt with the skb */ | |
| } | |
| /** | |
| * ieee80211_subif_start_xmit - netif start_xmit function for Ethernet-type | |
| * subinterfaces (wlan#, WDS, and VLAN interfaces) | |
| * @skb: packet to be sent | |
| * @dev: incoming interface | |
| * | |
| * Returns: 0 on success (and frees skb in this case) or 1 on failure (skb will | |
| * not be freed, and caller is responsible for either retrying later or freeing | |
| * skb). | |
| * | |
| * This function takes in an Ethernet header and encapsulates it with suitable | |
| * IEEE 802.11 header based on which interface the packet is coming in. The | |
| * encapsulated packet will then be passed to master interface, wlan#.11, for | |
| * transmission (through low-level driver). | |
| */ | |
| int ieee80211_subif_start_xmit(struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = sdata->local; | |
| int ret = 1, head_need; | |
| u16 ethertype, hdrlen, meshhdrlen = 0; | |
| __le16 fc; | |
| struct ieee80211_hdr hdr; | |
| struct ieee80211s_hdr mesh_hdr; | |
| const u8 *encaps_data; | |
| int encaps_len, skip_header_bytes; | |
| int nh_pos, h_pos; | |
| struct sta_info *sta; | |
| u32 sta_flags = 0; | |
| if (unlikely(skb->len < ETH_HLEN)) { | |
| ret = 0; | |
| goto fail; | |
| } | |
| if (!(local->hw.flags & IEEE80211_HW_NO_STACK_DYNAMIC_PS) && | |
| local->dynamic_ps_timeout > 0) { | |
| if (local->hw.conf.flags & IEEE80211_CONF_PS) { | |
| ieee80211_stop_queues_by_reason(&local->hw, | |
| IEEE80211_QUEUE_STOP_REASON_PS); | |
| queue_work(local->hw.workqueue, | |
| &local->dynamic_ps_disable_work); | |
| } | |
| mod_timer(&local->dynamic_ps_timer, jiffies + | |
| msecs_to_jiffies(local->dynamic_ps_timeout)); | |
| } | |
| nh_pos = skb_network_header(skb) - skb->data; | |
| h_pos = skb_transport_header(skb) - skb->data; | |
| /* convert Ethernet header to proper 802.11 header (based on | |
| * operation mode) */ | |
| ethertype = (skb->data[12] << 8) | skb->data[13]; | |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA); | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_AP_VLAN: | |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); | |
| /* DA BSSID SA */ | |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); | |
| memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN); | |
| hdrlen = 24; | |
| break; | |
| case NL80211_IFTYPE_WDS: | |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); | |
| /* RA TA DA SA */ | |
| memcpy(hdr.addr1, sdata->u.wds.remote_addr, ETH_ALEN); | |
| memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); | |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); | |
| hdrlen = 30; | |
| break; | |
| #ifdef CONFIG_MAC80211_MESH | |
| case NL80211_IFTYPE_MESH_POINT: | |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); | |
| if (!sdata->u.mesh.mshcfg.dot11MeshTTL) { | |
| /* Do not send frames with mesh_ttl == 0 */ | |
| sdata->u.mesh.mshstats.dropped_frames_ttl++; | |
| ret = 0; | |
| goto fail; | |
| } | |
| memset(&mesh_hdr, 0, sizeof(mesh_hdr)); | |
| if (compare_ether_addr(dev->dev_addr, | |
| skb->data + ETH_ALEN) == 0) { | |
| /* RA TA DA SA */ | |
| memset(hdr.addr1, 0, ETH_ALEN); | |
| memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); | |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); | |
| meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, sdata); | |
| } else { | |
| /* packet from other interface */ | |
| struct mesh_path *mppath; | |
| memset(hdr.addr1, 0, ETH_ALEN); | |
| memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); | |
| memcpy(hdr.addr4, dev->dev_addr, ETH_ALEN); | |
| if (is_multicast_ether_addr(skb->data)) | |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); | |
| else { | |
| rcu_read_lock(); | |
| mppath = mpp_path_lookup(skb->data, sdata); | |
| if (mppath) | |
| memcpy(hdr.addr3, mppath->mpp, ETH_ALEN); | |
| else | |
| memset(hdr.addr3, 0xff, ETH_ALEN); | |
| rcu_read_unlock(); | |
| } | |
| mesh_hdr.flags |= MESH_FLAGS_AE_A5_A6; | |
| mesh_hdr.ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; | |
| put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &mesh_hdr.seqnum); | |
| memcpy(mesh_hdr.eaddr1, skb->data, ETH_ALEN); | |
| memcpy(mesh_hdr.eaddr2, skb->data + ETH_ALEN, ETH_ALEN); | |
| sdata->u.mesh.mesh_seqnum++; | |
| meshhdrlen = 18; | |
| } | |
| hdrlen = 30; | |
| break; | |
| #endif | |
| case NL80211_IFTYPE_STATION: | |
| fc |= cpu_to_le16(IEEE80211_FCTL_TODS); | |
| /* BSSID SA DA */ | |
| memcpy(hdr.addr1, sdata->u.sta.bssid, ETH_ALEN); | |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); | |
| hdrlen = 24; | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| /* DA SA BSSID */ | |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | |
| memcpy(hdr.addr3, sdata->u.sta.bssid, ETH_ALEN); | |
| hdrlen = 24; | |
| break; | |
| default: | |
| ret = 0; | |
| goto fail; | |
| } | |
| /* | |
| * There's no need to try to look up the destination | |
| * if it is a multicast address (which can only happen | |
| * in AP mode) | |
| */ | |
| if (!is_multicast_ether_addr(hdr.addr1)) { | |
| rcu_read_lock(); | |
| sta = sta_info_get(local, hdr.addr1); | |
| if (sta) | |
| sta_flags = get_sta_flags(sta); | |
| rcu_read_unlock(); | |
| } | |
| /* receiver and we are QoS enabled, use a QoS type frame */ | |
| if (sta_flags & WLAN_STA_WME && | |
| ieee80211_num_regular_queues(&local->hw) >= 4) { | |
| fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA); | |
| hdrlen += 2; | |
| } | |
| /* | |
| * Drop unicast frames to unauthorised stations unless they are | |
| * EAPOL frames from the local station. | |
| */ | |
| if (!ieee80211_vif_is_mesh(&sdata->vif) && | |
| unlikely(!is_multicast_ether_addr(hdr.addr1) && | |
| !(sta_flags & WLAN_STA_AUTHORIZED) && | |
| !(ethertype == ETH_P_PAE && | |
| compare_ether_addr(dev->dev_addr, | |
| skb->data + ETH_ALEN) == 0))) { | |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | |
| if (net_ratelimit()) | |
| printk(KERN_DEBUG "%s: dropped frame to %pM" | |
| " (unauthorized port)\n", dev->name, | |
| hdr.addr1); | |
| #endif | |
| I802_DEBUG_INC(local->tx_handlers_drop_unauth_port); | |
| ret = 0; | |
| goto fail; | |
| } | |
| hdr.frame_control = fc; | |
| hdr.duration_id = 0; | |
| hdr.seq_ctrl = 0; | |
| skip_header_bytes = ETH_HLEN; | |
| if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { | |
| encaps_data = bridge_tunnel_header; | |
| encaps_len = sizeof(bridge_tunnel_header); | |
| skip_header_bytes -= 2; | |
| } else if (ethertype >= 0x600) { | |
| encaps_data = rfc1042_header; | |
| encaps_len = sizeof(rfc1042_header); | |
| skip_header_bytes -= 2; | |
| } else { | |
| encaps_data = NULL; | |
| encaps_len = 0; | |
| } | |
| skb_pull(skb, skip_header_bytes); | |
| nh_pos -= skip_header_bytes; | |
| h_pos -= skip_header_bytes; | |
| head_need = hdrlen + encaps_len + meshhdrlen - skb_headroom(skb); | |
| /* | |
| * So we need to modify the skb header and hence need a copy of | |
| * that. The head_need variable above doesn't, so far, include | |
| * the needed header space that we don't need right away. If we | |
| * can, then we don't reallocate right now but only after the | |
| * frame arrives at the master device (if it does...) | |
| * | |
| * If we cannot, however, then we will reallocate to include all | |
| * the ever needed space. Also, if we need to reallocate it anyway, | |
| * make it big enough for everything we may ever need. | |
| */ | |
| if (head_need > 0 || skb_cloned(skb)) { | |
| head_need += IEEE80211_ENCRYPT_HEADROOM; | |
| head_need += local->tx_headroom; | |
| head_need = max_t(int, 0, head_need); | |
| if (ieee80211_skb_resize(local, skb, head_need, true)) | |
| goto fail; | |
| } | |
| if (encaps_data) { | |
| memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); | |
| nh_pos += encaps_len; | |
| h_pos += encaps_len; | |
| } | |
| if (meshhdrlen > 0) { | |
| memcpy(skb_push(skb, meshhdrlen), &mesh_hdr, meshhdrlen); | |
| nh_pos += meshhdrlen; | |
| h_pos += meshhdrlen; | |
| } | |
| if (ieee80211_is_data_qos(fc)) { | |
| __le16 *qos_control; | |
| qos_control = (__le16*) skb_push(skb, 2); | |
| memcpy(skb_push(skb, hdrlen - 2), &hdr, hdrlen - 2); | |
| /* | |
| * Maybe we could actually set some fields here, for now just | |
| * initialise to zero to indicate no special operation. | |
| */ | |
| *qos_control = 0; | |
| } else | |
| memcpy(skb_push(skb, hdrlen), &hdr, hdrlen); | |
| nh_pos += hdrlen; | |
| h_pos += hdrlen; | |
| skb->iif = dev->ifindex; | |
| skb->dev = local->mdev; | |
| dev->stats.tx_packets++; | |
| dev->stats.tx_bytes += skb->len; | |
| /* Update skb pointers to various headers since this modified frame | |
| * is going to go through Linux networking code that may potentially | |
| * need things like pointer to IP header. */ | |
| skb_set_mac_header(skb, 0); | |
| skb_set_network_header(skb, nh_pos); | |
| skb_set_transport_header(skb, h_pos); | |
| dev->trans_start = jiffies; | |
| dev_queue_xmit(skb); | |
| return 0; | |
| fail: | |
| if (!ret) | |
| dev_kfree_skb(skb); | |
| return ret; | |
| } | |
| /* | |
| * ieee80211_clear_tx_pending may not be called in a context where | |
| * it is possible that it packets could come in again. | |
| */ | |
| void ieee80211_clear_tx_pending(struct ieee80211_local *local) | |
| { | |
| int i, j; | |
| struct ieee80211_tx_stored_packet *store; | |
| for (i = 0; i < ieee80211_num_regular_queues(&local->hw); i++) { | |
| if (!test_bit(i, local->queues_pending)) | |
| continue; | |
| store = &local->pending_packet[i]; | |
| kfree_skb(store->skb); | |
| for (j = 0; j < store->num_extra_frag; j++) | |
| kfree_skb(store->extra_frag[j]); | |
| kfree(store->extra_frag); | |
| clear_bit(i, local->queues_pending); | |
| } | |
| } | |
| /* | |
| * Transmit all pending packets. Called from tasklet, locks master device | |
| * TX lock so that no new packets can come in. | |
| */ | |
| void ieee80211_tx_pending(unsigned long data) | |
| { | |
| struct ieee80211_local *local = (struct ieee80211_local *)data; | |
| struct net_device *dev = local->mdev; | |
| struct ieee80211_tx_stored_packet *store; | |
| struct ieee80211_tx_data tx; | |
| int i, ret; | |
| netif_tx_lock_bh(dev); | |
| for (i = 0; i < ieee80211_num_regular_queues(&local->hw); i++) { | |
| /* Check that this queue is ok */ | |
| if (__netif_subqueue_stopped(local->mdev, i) && | |
| !test_bit(i, local->queues_pending_run)) | |
| continue; | |
| if (!test_bit(i, local->queues_pending)) { | |
| clear_bit(i, local->queues_pending_run); | |
| ieee80211_wake_queue(&local->hw, i); | |
| continue; | |
| } | |
| clear_bit(i, local->queues_pending_run); | |
| netif_start_subqueue(local->mdev, i); | |
| store = &local->pending_packet[i]; | |
| tx.extra_frag = store->extra_frag; | |
| tx.num_extra_frag = store->num_extra_frag; | |
| tx.flags = 0; | |
| ret = __ieee80211_tx(local, store->skb, &tx); | |
| if (ret) { | |
| if (ret == IEEE80211_TX_FRAG_AGAIN) | |
| store->skb = NULL; | |
| } else { | |
| clear_bit(i, local->queues_pending); | |
| ieee80211_wake_queue(&local->hw, i); | |
| } | |
| } | |
| netif_tx_unlock_bh(dev); | |
| } | |
| /* functions for drivers to get certain frames */ | |
| static void ieee80211_beacon_add_tim(struct ieee80211_if_ap *bss, | |
| struct sk_buff *skb, | |
| struct beacon_data *beacon) | |
| { | |
| u8 *pos, *tim; | |
| int aid0 = 0; | |
| int i, have_bits = 0, n1, n2; | |
| /* Generate bitmap for TIM only if there are any STAs in power save | |
| * mode. */ | |
| if (atomic_read(&bss->num_sta_ps) > 0) | |
| /* in the hope that this is faster than | |
| * checking byte-for-byte */ | |
| have_bits = !bitmap_empty((unsigned long*)bss->tim, | |
| IEEE80211_MAX_AID+1); | |
| if (bss->dtim_count == 0) | |
| bss->dtim_count = beacon->dtim_period - 1; | |
| else | |
| bss->dtim_count--; | |
| tim = pos = (u8 *) skb_put(skb, 6); | |
| *pos++ = WLAN_EID_TIM; | |
| *pos++ = 4; | |
| *pos++ = bss->dtim_count; | |
| *pos++ = beacon->dtim_period; | |
| if (bss->dtim_count == 0 && !skb_queue_empty(&bss->ps_bc_buf)) | |
| aid0 = 1; | |
| if (have_bits) { | |
| /* Find largest even number N1 so that bits numbered 1 through | |
| * (N1 x 8) - 1 in the bitmap are 0 and number N2 so that bits | |
| * (N2 + 1) x 8 through 2007 are 0. */ | |
| n1 = 0; | |
| for (i = 0; i < IEEE80211_MAX_TIM_LEN; i++) { | |
| if (bss->tim[i]) { | |
| n1 = i & 0xfe; | |
| break; | |
| } | |
| } | |
| n2 = n1; | |
| for (i = IEEE80211_MAX_TIM_LEN - 1; i >= n1; i--) { | |
| if (bss->tim[i]) { | |
| n2 = i; | |
| break; | |
| } | |
| } | |
| /* Bitmap control */ | |
| *pos++ = n1 | aid0; | |
| /* Part Virt Bitmap */ | |
| memcpy(pos, bss->tim + n1, n2 - n1 + 1); | |
| tim[1] = n2 - n1 + 4; | |
| skb_put(skb, n2 - n1); | |
| } else { | |
| *pos++ = aid0; /* Bitmap control */ | |
| *pos++ = 0; /* Part Virt Bitmap */ | |
| } | |
| } | |
| struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct sk_buff *skb = NULL; | |
| struct ieee80211_tx_info *info; | |
| struct ieee80211_sub_if_data *sdata = NULL; | |
| struct ieee80211_if_ap *ap = NULL; | |
| struct ieee80211_if_sta *ifsta = NULL; | |
| struct beacon_data *beacon; | |
| struct ieee80211_supported_band *sband; | |
| enum ieee80211_band band = local->hw.conf.channel->band; | |
| sband = local->hw.wiphy->bands[band]; | |
| rcu_read_lock(); | |
| sdata = vif_to_sdata(vif); | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) { | |
| ap = &sdata->u.ap; | |
| beacon = rcu_dereference(ap->beacon); | |
| if (ap && beacon) { | |
| /* | |
| * headroom, head length, | |
| * tail length and maximum TIM length | |
| */ | |
| skb = dev_alloc_skb(local->tx_headroom + | |
| beacon->head_len + | |
| beacon->tail_len + 256); | |
| if (!skb) | |
| goto out; | |
| skb_reserve(skb, local->tx_headroom); | |
| memcpy(skb_put(skb, beacon->head_len), beacon->head, | |
| beacon->head_len); | |
| /* | |
| * Not very nice, but we want to allow the driver to call | |
| * ieee80211_beacon_get() as a response to the set_tim() | |
| * callback. That, however, is already invoked under the | |
| * sta_lock to guarantee consistent and race-free update | |
| * of the tim bitmap in mac80211 and the driver. | |
| */ | |
| if (local->tim_in_locked_section) { | |
| ieee80211_beacon_add_tim(ap, skb, beacon); | |
| } else { | |
| unsigned long flags; | |
| spin_lock_irqsave(&local->sta_lock, flags); | |
| ieee80211_beacon_add_tim(ap, skb, beacon); | |
| spin_unlock_irqrestore(&local->sta_lock, flags); | |
| } | |
| if (beacon->tail) | |
| memcpy(skb_put(skb, beacon->tail_len), | |
| beacon->tail, beacon->tail_len); | |
| } else | |
| goto out; | |
| } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { | |
| struct ieee80211_hdr *hdr; | |
| ifsta = &sdata->u.sta; | |
| if (!ifsta->probe_resp) | |
| goto out; | |
| skb = skb_copy(ifsta->probe_resp, GFP_ATOMIC); | |
| if (!skb) | |
| goto out; | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | |
| IEEE80211_STYPE_BEACON); | |
| } else if (ieee80211_vif_is_mesh(&sdata->vif)) { | |
| struct ieee80211_mgmt *mgmt; | |
| u8 *pos; | |
| /* headroom, head length, tail length and maximum TIM length */ | |
| skb = dev_alloc_skb(local->tx_headroom + 400); | |
| if (!skb) | |
| goto out; | |
| skb_reserve(skb, local->hw.extra_tx_headroom); | |
| mgmt = (struct ieee80211_mgmt *) | |
| skb_put(skb, 24 + sizeof(mgmt->u.beacon)); | |
| memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon)); | |
| mgmt->frame_control = | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); | |
| memset(mgmt->da, 0xff, ETH_ALEN); | |
| memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN); | |
| /* BSSID is left zeroed, wildcard value */ | |
| mgmt->u.beacon.beacon_int = | |
| cpu_to_le16(local->hw.conf.beacon_int); | |
| mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */ | |
| pos = skb_put(skb, 2); | |
| *pos++ = WLAN_EID_SSID; | |
| *pos++ = 0x0; | |
| mesh_mgmt_ies_add(skb, sdata); | |
| } else { | |
| WARN_ON(1); | |
| goto out; | |
| } | |
| info = IEEE80211_SKB_CB(skb); | |
| skb->do_not_encrypt = 1; | |
| info->band = band; | |
| /* | |
| * XXX: For now, always use the lowest rate | |
| */ | |
| info->control.rates[0].idx = 0; | |
| info->control.rates[0].count = 1; | |
| info->control.rates[1].idx = -1; | |
| info->control.rates[2].idx = -1; | |
| info->control.rates[3].idx = -1; | |
| info->control.rates[4].idx = -1; | |
| BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 5); | |
| info->control.vif = vif; | |
| info->flags |= IEEE80211_TX_CTL_NO_ACK; | |
| info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; | |
| info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; | |
| out: | |
| rcu_read_unlock(); | |
| return skb; | |
| } | |
| EXPORT_SYMBOL(ieee80211_beacon_get); | |
| void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | |
| const void *frame, size_t frame_len, | |
| const struct ieee80211_tx_info *frame_txctl, | |
| struct ieee80211_rts *rts) | |
| { | |
| const struct ieee80211_hdr *hdr = frame; | |
| rts->frame_control = | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS); | |
| rts->duration = ieee80211_rts_duration(hw, vif, frame_len, | |
| frame_txctl); | |
| memcpy(rts->ra, hdr->addr1, sizeof(rts->ra)); | |
| memcpy(rts->ta, hdr->addr2, sizeof(rts->ta)); | |
| } | |
| EXPORT_SYMBOL(ieee80211_rts_get); | |
| void ieee80211_ctstoself_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | |
| const void *frame, size_t frame_len, | |
| const struct ieee80211_tx_info *frame_txctl, | |
| struct ieee80211_cts *cts) | |
| { | |
| const struct ieee80211_hdr *hdr = frame; | |
| cts->frame_control = | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS); | |
| cts->duration = ieee80211_ctstoself_duration(hw, vif, | |
| frame_len, frame_txctl); | |
| memcpy(cts->ra, hdr->addr1, sizeof(cts->ra)); | |
| } | |
| EXPORT_SYMBOL(ieee80211_ctstoself_get); | |
| struct sk_buff * | |
| ieee80211_get_buffered_bc(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct sk_buff *skb = NULL; | |
| struct sta_info *sta; | |
| struct ieee80211_tx_data tx; | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ieee80211_if_ap *bss = NULL; | |
| struct beacon_data *beacon; | |
| struct ieee80211_tx_info *info; | |
| sdata = vif_to_sdata(vif); | |
| bss = &sdata->u.ap; | |
| if (!bss) | |
| return NULL; | |
| rcu_read_lock(); | |
| beacon = rcu_dereference(bss->beacon); | |
| if (sdata->vif.type != NL80211_IFTYPE_AP || !beacon || !beacon->head) | |
| goto out; | |
| if (bss->dtim_count != 0) | |
| goto out; /* send buffered bc/mc only after DTIM beacon */ | |
| while (1) { | |
| skb = skb_dequeue(&bss->ps_bc_buf); | |
| if (!skb) | |
| goto out; | |
| local->total_ps_buffered--; | |
| if (!skb_queue_empty(&bss->ps_bc_buf) && skb->len >= 2) { | |
| struct ieee80211_hdr *hdr = | |
| (struct ieee80211_hdr *) skb->data; | |
| /* more buffered multicast/broadcast frames ==> set | |
| * MoreData flag in IEEE 802.11 header to inform PS | |
| * STAs */ | |
| hdr->frame_control |= | |
| cpu_to_le16(IEEE80211_FCTL_MOREDATA); | |
| } | |
| if (!ieee80211_tx_prepare(local, &tx, skb)) | |
| break; | |
| dev_kfree_skb_any(skb); | |
| } | |
| info = IEEE80211_SKB_CB(skb); | |
| sta = tx.sta; | |
| tx.flags |= IEEE80211_TX_PS_BUFFERED; | |
| tx.channel = local->hw.conf.channel; | |
| info->band = tx.channel->band; | |
| if (invoke_tx_handlers(&tx)) | |
| skb = NULL; | |
| out: | |
| rcu_read_unlock(); | |
| return skb; | |
| } | |
| EXPORT_SYMBOL(ieee80211_get_buffered_bc); |