| /* | |
| * PCI Express Hot Plug Controller Driver | |
| * | |
| * Copyright (C) 1995,2001 Compaq Computer Corporation | |
| * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) | |
| * Copyright (C) 2001 IBM Corp. | |
| * Copyright (C) 2003-2004 Intel Corporation | |
| * | |
| * All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or (at | |
| * your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | |
| * NON INFRINGEMENT. See the GNU General Public License for more | |
| * details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * | |
| * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/pci.h> | |
| #include "pciehp.h" | |
| #include <linux/interrupt.h> | |
| #include <linux/time.h> | |
| /* Global variables */ | |
| int pciehp_debug; | |
| int pciehp_poll_mode; | |
| int pciehp_poll_time; | |
| int pciehp_force; | |
| struct workqueue_struct *pciehp_wq; | |
| #define DRIVER_VERSION "0.4" | |
| #define DRIVER_AUTHOR "Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>, Dely Sy <dely.l.sy@intel.com>" | |
| #define DRIVER_DESC "PCI Express Hot Plug Controller Driver" | |
| MODULE_AUTHOR(DRIVER_AUTHOR); | |
| MODULE_DESCRIPTION(DRIVER_DESC); | |
| MODULE_LICENSE("GPL"); | |
| module_param(pciehp_debug, bool, 0644); | |
| module_param(pciehp_poll_mode, bool, 0644); | |
| module_param(pciehp_poll_time, int, 0644); | |
| module_param(pciehp_force, bool, 0644); | |
| MODULE_PARM_DESC(pciehp_debug, "Debugging mode enabled or not"); | |
| MODULE_PARM_DESC(pciehp_poll_mode, "Using polling mechanism for hot-plug events or not"); | |
| MODULE_PARM_DESC(pciehp_poll_time, "Polling mechanism frequency, in seconds"); | |
| MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if _OSC and OSHP are missing"); | |
| #define PCIE_MODULE_NAME "pciehp" | |
| static int set_attention_status (struct hotplug_slot *slot, u8 value); | |
| static int enable_slot (struct hotplug_slot *slot); | |
| static int disable_slot (struct hotplug_slot *slot); | |
| static int get_power_status (struct hotplug_slot *slot, u8 *value); | |
| static int get_attention_status (struct hotplug_slot *slot, u8 *value); | |
| static int get_latch_status (struct hotplug_slot *slot, u8 *value); | |
| static int get_adapter_status (struct hotplug_slot *slot, u8 *value); | |
| static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); | |
| static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); | |
| static struct hotplug_slot_ops pciehp_hotplug_slot_ops = { | |
| .owner = THIS_MODULE, | |
| .set_attention_status = set_attention_status, | |
| .enable_slot = enable_slot, | |
| .disable_slot = disable_slot, | |
| .get_power_status = get_power_status, | |
| .get_attention_status = get_attention_status, | |
| .get_latch_status = get_latch_status, | |
| .get_adapter_status = get_adapter_status, | |
| .get_max_bus_speed = get_max_bus_speed, | |
| .get_cur_bus_speed = get_cur_bus_speed, | |
| }; | |
| /* | |
| * Check the status of the Electro Mechanical Interlock (EMI) | |
| */ | |
| static int get_lock_status(struct hotplug_slot *hotplug_slot, u8 *value) | |
| { | |
| struct slot *slot = hotplug_slot->private; | |
| return (slot->hpc_ops->get_emi_status(slot, value)); | |
| } | |
| /* | |
| * sysfs interface for the Electro Mechanical Interlock (EMI) | |
| * 1 == locked, 0 == unlocked | |
| */ | |
| static ssize_t lock_read_file(struct hotplug_slot *slot, char *buf) | |
| { | |
| int retval; | |
| u8 value; | |
| retval = get_lock_status(slot, &value); | |
| if (retval) | |
| goto lock_read_exit; | |
| retval = sprintf (buf, "%d\n", value); | |
| lock_read_exit: | |
| return retval; | |
| } | |
| /* | |
| * Change the status of the Electro Mechanical Interlock (EMI) | |
| * This is a toggle - in addition there must be at least 1 second | |
| * in between toggles. | |
| */ | |
| static int set_lock_status(struct hotplug_slot *hotplug_slot, u8 status) | |
| { | |
| struct slot *slot = hotplug_slot->private; | |
| int retval; | |
| u8 value; | |
| mutex_lock(&slot->ctrl->crit_sect); | |
| /* has it been >1 sec since our last toggle? */ | |
| if ((get_seconds() - slot->last_emi_toggle) < 1) { | |
| mutex_unlock(&slot->ctrl->crit_sect); | |
| return -EINVAL; | |
| } | |
| /* see what our current state is */ | |
| retval = get_lock_status(hotplug_slot, &value); | |
| if (retval || (value == status)) | |
| goto set_lock_exit; | |
| slot->hpc_ops->toggle_emi(slot); | |
| set_lock_exit: | |
| mutex_unlock(&slot->ctrl->crit_sect); | |
| return 0; | |
| } | |
| /* | |
| * sysfs interface which allows the user to toggle the Electro Mechanical | |
| * Interlock. Valid values are either 0 or 1. 0 == unlock, 1 == lock | |
| */ | |
| static ssize_t lock_write_file(struct hotplug_slot *hotplug_slot, | |
| const char *buf, size_t count) | |
| { | |
| struct slot *slot = hotplug_slot->private; | |
| unsigned long llock; | |
| u8 lock; | |
| int retval = 0; | |
| llock = simple_strtoul(buf, NULL, 10); | |
| lock = (u8)(llock & 0xff); | |
| switch (lock) { | |
| case 0: | |
| case 1: | |
| retval = set_lock_status(hotplug_slot, lock); | |
| break; | |
| default: | |
| ctrl_err(slot->ctrl, "%d is an invalid lock value\n", | |
| lock); | |
| retval = -EINVAL; | |
| } | |
| if (retval) | |
| return retval; | |
| return count; | |
| } | |
| static struct hotplug_slot_attribute hotplug_slot_attr_lock = { | |
| .attr = {.name = "lock", .mode = S_IFREG | S_IRUGO | S_IWUSR}, | |
| .show = lock_read_file, | |
| .store = lock_write_file | |
| }; | |
| /** | |
| * release_slot - free up the memory used by a slot | |
| * @hotplug_slot: slot to free | |
| */ | |
| static void release_slot(struct hotplug_slot *hotplug_slot) | |
| { | |
| struct slot *slot = hotplug_slot->private; | |
| ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", | |
| __func__, hotplug_slot_name(hotplug_slot)); | |
| kfree(hotplug_slot->info); | |
| kfree(hotplug_slot); | |
| } | |
| static int init_slots(struct controller *ctrl) | |
| { | |
| struct slot *slot; | |
| struct hotplug_slot *hotplug_slot; | |
| struct hotplug_slot_info *info; | |
| char name[SLOT_NAME_SIZE]; | |
| int retval = -ENOMEM; | |
| list_for_each_entry(slot, &ctrl->slot_list, slot_list) { | |
| hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL); | |
| if (!hotplug_slot) | |
| goto error; | |
| info = kzalloc(sizeof(*info), GFP_KERNEL); | |
| if (!info) | |
| goto error_hpslot; | |
| /* register this slot with the hotplug pci core */ | |
| hotplug_slot->info = info; | |
| hotplug_slot->private = slot; | |
| hotplug_slot->release = &release_slot; | |
| hotplug_slot->ops = &pciehp_hotplug_slot_ops; | |
| slot->hotplug_slot = hotplug_slot; | |
| snprintf(name, SLOT_NAME_SIZE, "%u", slot->number); | |
| ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x " | |
| "hp_slot=%x sun=%x slot_device_offset=%x\n", | |
| pci_domain_nr(ctrl->pci_dev->subordinate), | |
| slot->bus, slot->device, slot->hp_slot, slot->number, | |
| ctrl->slot_device_offset); | |
| retval = pci_hp_register(hotplug_slot, | |
| ctrl->pci_dev->subordinate, | |
| slot->device, | |
| name); | |
| if (retval) { | |
| ctrl_err(ctrl, "pci_hp_register failed with error %d\n", | |
| retval); | |
| goto error_info; | |
| } | |
| get_power_status(hotplug_slot, &info->power_status); | |
| get_attention_status(hotplug_slot, &info->attention_status); | |
| get_latch_status(hotplug_slot, &info->latch_status); | |
| get_adapter_status(hotplug_slot, &info->adapter_status); | |
| /* create additional sysfs entries */ | |
| if (EMI(ctrl)) { | |
| retval = sysfs_create_file(&hotplug_slot->pci_slot->kobj, | |
| &hotplug_slot_attr_lock.attr); | |
| if (retval) { | |
| pci_hp_deregister(hotplug_slot); | |
| ctrl_err(ctrl, "Cannot create additional sysfs " | |
| "entries\n"); | |
| goto error_info; | |
| } | |
| } | |
| } | |
| return 0; | |
| error_info: | |
| kfree(info); | |
| error_hpslot: | |
| kfree(hotplug_slot); | |
| error: | |
| return retval; | |
| } | |
| static void cleanup_slots(struct controller *ctrl) | |
| { | |
| struct slot *slot; | |
| list_for_each_entry(slot, &ctrl->slot_list, slot_list) { | |
| if (EMI(ctrl)) | |
| sysfs_remove_file(&slot->hotplug_slot->pci_slot->kobj, | |
| &hotplug_slot_attr_lock.attr); | |
| pci_hp_deregister(slot->hotplug_slot); | |
| } | |
| } | |
| /* | |
| * set_attention_status - Turns the Amber LED for a slot on, off or blink | |
| */ | |
| static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status) | |
| { | |
| struct slot *slot = hotplug_slot->private; | |
| ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", | |
| __func__, slot_name(slot)); | |
| hotplug_slot->info->attention_status = status; | |
| if (ATTN_LED(slot->ctrl)) | |
| slot->hpc_ops->set_attention_status(slot, status); | |
| return 0; | |
| } | |
| static int enable_slot(struct hotplug_slot *hotplug_slot) | |
| { | |
| struct slot *slot = hotplug_slot->private; | |
| ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", | |
| __func__, slot_name(slot)); | |
| return pciehp_sysfs_enable_slot(slot); | |
| } | |
| static int disable_slot(struct hotplug_slot *hotplug_slot) | |
| { | |
| struct slot *slot = hotplug_slot->private; | |
| ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", | |
| __func__, slot_name(slot)); | |
| return pciehp_sysfs_disable_slot(slot); | |
| } | |
| static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) | |
| { | |
| struct slot *slot = hotplug_slot->private; | |
| int retval; | |
| ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", | |
| __func__, slot_name(slot)); | |
| retval = slot->hpc_ops->get_power_status(slot, value); | |
| if (retval < 0) | |
| *value = hotplug_slot->info->power_status; | |
| return 0; | |
| } | |
| static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) | |
| { | |
| struct slot *slot = hotplug_slot->private; | |
| int retval; | |
| ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", | |
| __func__, slot_name(slot)); | |
| retval = slot->hpc_ops->get_attention_status(slot, value); | |
| if (retval < 0) | |
| *value = hotplug_slot->info->attention_status; | |
| return 0; | |
| } | |
| static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) | |
| { | |
| struct slot *slot = hotplug_slot->private; | |
| int retval; | |
| ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", | |
| __func__, slot_name(slot)); | |
| retval = slot->hpc_ops->get_latch_status(slot, value); | |
| if (retval < 0) | |
| *value = hotplug_slot->info->latch_status; | |
| return 0; | |
| } | |
| static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) | |
| { | |
| struct slot *slot = hotplug_slot->private; | |
| int retval; | |
| ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", | |
| __func__, slot_name(slot)); | |
| retval = slot->hpc_ops->get_adapter_status(slot, value); | |
| if (retval < 0) | |
| *value = hotplug_slot->info->adapter_status; | |
| return 0; | |
| } | |
| static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, | |
| enum pci_bus_speed *value) | |
| { | |
| struct slot *slot = hotplug_slot->private; | |
| int retval; | |
| ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", | |
| __func__, slot_name(slot)); | |
| retval = slot->hpc_ops->get_max_bus_speed(slot, value); | |
| if (retval < 0) | |
| *value = PCI_SPEED_UNKNOWN; | |
| return 0; | |
| } | |
| static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) | |
| { | |
| struct slot *slot = hotplug_slot->private; | |
| int retval; | |
| ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", | |
| __func__, slot_name(slot)); | |
| retval = slot->hpc_ops->get_cur_bus_speed(slot, value); | |
| if (retval < 0) | |
| *value = PCI_SPEED_UNKNOWN; | |
| return 0; | |
| } | |
| static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_id *id) | |
| { | |
| int rc; | |
| struct controller *ctrl; | |
| struct slot *t_slot; | |
| u8 value; | |
| struct pci_dev *pdev = dev->port; | |
| if (pciehp_force) | |
| dev_info(&dev->device, | |
| "Bypassing BIOS check for pciehp use on %s\n", | |
| pci_name(pdev)); | |
| else if (pciehp_get_hp_hw_control_from_firmware(pdev)) | |
| goto err_out_none; | |
| ctrl = pcie_init(dev); | |
| if (!ctrl) { | |
| dev_err(&dev->device, "Controller initialization failed\n"); | |
| goto err_out_none; | |
| } | |
| set_service_data(dev, ctrl); | |
| /* Setup the slot information structures */ | |
| rc = init_slots(ctrl); | |
| if (rc) { | |
| if (rc == -EBUSY) | |
| ctrl_warn(ctrl, "Slot already registered by another " | |
| "hotplug driver\n"); | |
| else | |
| ctrl_err(ctrl, "Slot initialization failed\n"); | |
| goto err_out_release_ctlr; | |
| } | |
| /* Enable events after we have setup the data structures */ | |
| rc = pcie_init_notification(ctrl); | |
| if (rc) { | |
| ctrl_err(ctrl, "Notification initialization failed\n"); | |
| goto err_out_release_ctlr; | |
| } | |
| /* Check if slot is occupied */ | |
| t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); | |
| t_slot->hpc_ops->get_adapter_status(t_slot, &value); | |
| if (value) { | |
| if (pciehp_force) | |
| pciehp_enable_slot(t_slot); | |
| } else { | |
| /* Power off slot if not occupied */ | |
| if (POWER_CTRL(ctrl)) { | |
| rc = t_slot->hpc_ops->power_off_slot(t_slot); | |
| if (rc) | |
| goto err_out_free_ctrl_slot; | |
| } | |
| } | |
| return 0; | |
| err_out_free_ctrl_slot: | |
| cleanup_slots(ctrl); | |
| err_out_release_ctlr: | |
| ctrl->hpc_ops->release_ctlr(ctrl); | |
| err_out_none: | |
| return -ENODEV; | |
| } | |
| static void pciehp_remove (struct pcie_device *dev) | |
| { | |
| struct controller *ctrl = get_service_data(dev); | |
| cleanup_slots(ctrl); | |
| ctrl->hpc_ops->release_ctlr(ctrl); | |
| } | |
| #ifdef CONFIG_PM | |
| static int pciehp_suspend (struct pcie_device *dev, pm_message_t state) | |
| { | |
| dev_info(&dev->device, "%s ENTRY\n", __func__); | |
| return 0; | |
| } | |
| static int pciehp_resume (struct pcie_device *dev) | |
| { | |
| dev_info(&dev->device, "%s ENTRY\n", __func__); | |
| if (pciehp_force) { | |
| struct controller *ctrl = get_service_data(dev); | |
| struct slot *t_slot; | |
| u8 status; | |
| /* reinitialize the chipset's event detection logic */ | |
| pcie_enable_notification(ctrl); | |
| t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); | |
| /* Check if slot is occupied */ | |
| t_slot->hpc_ops->get_adapter_status(t_slot, &status); | |
| if (status) | |
| pciehp_enable_slot(t_slot); | |
| else | |
| pciehp_disable_slot(t_slot); | |
| } | |
| return 0; | |
| } | |
| #endif | |
| static struct pcie_port_service_id port_pci_ids[] = { { | |
| .vendor = PCI_ANY_ID, | |
| .device = PCI_ANY_ID, | |
| .port_type = PCIE_ANY_PORT, | |
| .service_type = PCIE_PORT_SERVICE_HP, | |
| .driver_data = 0, | |
| }, { /* end: all zeroes */ } | |
| }; | |
| static struct pcie_port_service_driver hpdriver_portdrv = { | |
| .name = PCIE_MODULE_NAME, | |
| .id_table = &port_pci_ids[0], | |
| .probe = pciehp_probe, | |
| .remove = pciehp_remove, | |
| #ifdef CONFIG_PM | |
| .suspend = pciehp_suspend, | |
| .resume = pciehp_resume, | |
| #endif /* PM */ | |
| }; | |
| static int __init pcied_init(void) | |
| { | |
| int retval = 0; | |
| pciehp_firmware_init(); | |
| retval = pcie_port_service_register(&hpdriver_portdrv); | |
| dbg("pcie_port_service_register = %d\n", retval); | |
| info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); | |
| if (retval) | |
| dbg("Failure to register service\n"); | |
| return retval; | |
| } | |
| static void __exit pcied_cleanup(void) | |
| { | |
| dbg("unload_pciehpd()\n"); | |
| pcie_port_service_unregister(&hpdriver_portdrv); | |
| info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n"); | |
| } | |
| module_init(pcied_init); | |
| module_exit(pcied_cleanup); |