| /******************************************************************************* | |
| Intel 10 Gigabit PCI Express Linux driver | |
| Copyright(c) 1999 - 2008 Intel Corporation. | |
| This program is free software; you can redistribute it and/or modify it | |
| under the terms and conditions of the GNU General Public License, | |
| version 2, as published by the Free Software Foundation. | |
| This program is distributed in the hope it will be useful, but WITHOUT | |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| more details. | |
| You should have received a copy of the GNU General Public License along with | |
| this program; if not, write to the Free Software Foundation, Inc., | |
| 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
| The full GNU General Public License is included in this distribution in | |
| the file called "COPYING". | |
| Contact Information: | |
| e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
| *******************************************************************************/ | |
| #include <linux/pci.h> | |
| #include <linux/delay.h> | |
| #include <linux/sched.h> | |
| #include "ixgbe_common.h" | |
| #include "ixgbe_phy.h" | |
| static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw); | |
| static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw); | |
| static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw); | |
| static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw); | |
| static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw); | |
| static void ixgbe_standby_eeprom(struct ixgbe_hw *hw); | |
| static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, | |
| u16 count); | |
| static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count); | |
| static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); | |
| static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); | |
| static void ixgbe_release_eeprom(struct ixgbe_hw *hw); | |
| static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw); | |
| static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index); | |
| static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index); | |
| static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); | |
| static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr); | |
| static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq); | |
| /** | |
| * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx | |
| * @hw: pointer to hardware structure | |
| * | |
| * Starts the hardware by filling the bus info structure and media type, clears | |
| * all on chip counters, initializes receive address registers, multicast | |
| * table, VLAN filter table, calls routine to set up link and flow control | |
| * settings, and leaves transmit and receive units disabled and uninitialized | |
| **/ | |
| s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) | |
| { | |
| u32 ctrl_ext; | |
| /* Set the media type */ | |
| hw->phy.media_type = hw->mac.ops.get_media_type(hw); | |
| /* Identify the PHY */ | |
| hw->phy.ops.identify(hw); | |
| /* | |
| * Store MAC address from RAR0, clear receive address registers, and | |
| * clear the multicast table | |
| */ | |
| hw->mac.ops.init_rx_addrs(hw); | |
| /* Clear the VLAN filter table */ | |
| hw->mac.ops.clear_vfta(hw); | |
| /* Set up link */ | |
| hw->mac.ops.setup_link(hw); | |
| /* Clear statistics registers */ | |
| hw->mac.ops.clear_hw_cntrs(hw); | |
| /* Set No Snoop Disable */ | |
| ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); | |
| ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS; | |
| IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); | |
| IXGBE_WRITE_FLUSH(hw); | |
| /* Clear adapter stopped flag */ | |
| hw->adapter_stopped = false; | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_init_hw_generic - Generic hardware initialization | |
| * @hw: pointer to hardware structure | |
| * | |
| * Initialize the hardware by resetting the hardware, filling the bus info | |
| * structure and media type, clears all on chip counters, initializes receive | |
| * address registers, multicast table, VLAN filter table, calls routine to set | |
| * up link and flow control settings, and leaves transmit and receive units | |
| * disabled and uninitialized | |
| **/ | |
| s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) | |
| { | |
| /* Reset the hardware */ | |
| hw->mac.ops.reset_hw(hw); | |
| /* Start the HW */ | |
| hw->mac.ops.start_hw(hw); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters | |
| * @hw: pointer to hardware structure | |
| * | |
| * Clears all hardware statistics counters by reading them from the hardware | |
| * Statistics counters are clear on read. | |
| **/ | |
| s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) | |
| { | |
| u16 i = 0; | |
| IXGBE_READ_REG(hw, IXGBE_CRCERRS); | |
| IXGBE_READ_REG(hw, IXGBE_ILLERRC); | |
| IXGBE_READ_REG(hw, IXGBE_ERRBC); | |
| IXGBE_READ_REG(hw, IXGBE_MSPDC); | |
| for (i = 0; i < 8; i++) | |
| IXGBE_READ_REG(hw, IXGBE_MPC(i)); | |
| IXGBE_READ_REG(hw, IXGBE_MLFC); | |
| IXGBE_READ_REG(hw, IXGBE_MRFC); | |
| IXGBE_READ_REG(hw, IXGBE_RLEC); | |
| IXGBE_READ_REG(hw, IXGBE_LXONTXC); | |
| IXGBE_READ_REG(hw, IXGBE_LXONRXC); | |
| IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); | |
| IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); | |
| for (i = 0; i < 8; i++) { | |
| IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); | |
| IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); | |
| IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); | |
| IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); | |
| } | |
| IXGBE_READ_REG(hw, IXGBE_PRC64); | |
| IXGBE_READ_REG(hw, IXGBE_PRC127); | |
| IXGBE_READ_REG(hw, IXGBE_PRC255); | |
| IXGBE_READ_REG(hw, IXGBE_PRC511); | |
| IXGBE_READ_REG(hw, IXGBE_PRC1023); | |
| IXGBE_READ_REG(hw, IXGBE_PRC1522); | |
| IXGBE_READ_REG(hw, IXGBE_GPRC); | |
| IXGBE_READ_REG(hw, IXGBE_BPRC); | |
| IXGBE_READ_REG(hw, IXGBE_MPRC); | |
| IXGBE_READ_REG(hw, IXGBE_GPTC); | |
| IXGBE_READ_REG(hw, IXGBE_GORCL); | |
| IXGBE_READ_REG(hw, IXGBE_GORCH); | |
| IXGBE_READ_REG(hw, IXGBE_GOTCL); | |
| IXGBE_READ_REG(hw, IXGBE_GOTCH); | |
| for (i = 0; i < 8; i++) | |
| IXGBE_READ_REG(hw, IXGBE_RNBC(i)); | |
| IXGBE_READ_REG(hw, IXGBE_RUC); | |
| IXGBE_READ_REG(hw, IXGBE_RFC); | |
| IXGBE_READ_REG(hw, IXGBE_ROC); | |
| IXGBE_READ_REG(hw, IXGBE_RJC); | |
| IXGBE_READ_REG(hw, IXGBE_MNGPRC); | |
| IXGBE_READ_REG(hw, IXGBE_MNGPDC); | |
| IXGBE_READ_REG(hw, IXGBE_MNGPTC); | |
| IXGBE_READ_REG(hw, IXGBE_TORL); | |
| IXGBE_READ_REG(hw, IXGBE_TORH); | |
| IXGBE_READ_REG(hw, IXGBE_TPR); | |
| IXGBE_READ_REG(hw, IXGBE_TPT); | |
| IXGBE_READ_REG(hw, IXGBE_PTC64); | |
| IXGBE_READ_REG(hw, IXGBE_PTC127); | |
| IXGBE_READ_REG(hw, IXGBE_PTC255); | |
| IXGBE_READ_REG(hw, IXGBE_PTC511); | |
| IXGBE_READ_REG(hw, IXGBE_PTC1023); | |
| IXGBE_READ_REG(hw, IXGBE_PTC1522); | |
| IXGBE_READ_REG(hw, IXGBE_MPTC); | |
| IXGBE_READ_REG(hw, IXGBE_BPTC); | |
| for (i = 0; i < 16; i++) { | |
| IXGBE_READ_REG(hw, IXGBE_QPRC(i)); | |
| IXGBE_READ_REG(hw, IXGBE_QBRC(i)); | |
| IXGBE_READ_REG(hw, IXGBE_QPTC(i)); | |
| IXGBE_READ_REG(hw, IXGBE_QBTC(i)); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_read_pba_num_generic - Reads part number from EEPROM | |
| * @hw: pointer to hardware structure | |
| * @pba_num: stores the part number from the EEPROM | |
| * | |
| * Reads the part number from the EEPROM. | |
| **/ | |
| s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num) | |
| { | |
| s32 ret_val; | |
| u16 data; | |
| ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data); | |
| if (ret_val) { | |
| hw_dbg(hw, "NVM Read Error\n"); | |
| return ret_val; | |
| } | |
| *pba_num = (u32)(data << 16); | |
| ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &data); | |
| if (ret_val) { | |
| hw_dbg(hw, "NVM Read Error\n"); | |
| return ret_val; | |
| } | |
| *pba_num |= data; | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_get_mac_addr_generic - Generic get MAC address | |
| * @hw: pointer to hardware structure | |
| * @mac_addr: Adapter MAC address | |
| * | |
| * Reads the adapter's MAC address from first Receive Address Register (RAR0) | |
| * A reset of the adapter must be performed prior to calling this function | |
| * in order for the MAC address to have been loaded from the EEPROM into RAR0 | |
| **/ | |
| s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr) | |
| { | |
| u32 rar_high; | |
| u32 rar_low; | |
| u16 i; | |
| rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0)); | |
| rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0)); | |
| for (i = 0; i < 4; i++) | |
| mac_addr[i] = (u8)(rar_low >> (i*8)); | |
| for (i = 0; i < 2; i++) | |
| mac_addr[i+4] = (u8)(rar_high >> (i*8)); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units | |
| * @hw: pointer to hardware structure | |
| * | |
| * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, | |
| * disables transmit and receive units. The adapter_stopped flag is used by | |
| * the shared code and drivers to determine if the adapter is in a stopped | |
| * state and should not touch the hardware. | |
| **/ | |
| s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) | |
| { | |
| u32 number_of_queues; | |
| u32 reg_val; | |
| u16 i; | |
| /* | |
| * Set the adapter_stopped flag so other driver functions stop touching | |
| * the hardware | |
| */ | |
| hw->adapter_stopped = true; | |
| /* Disable the receive unit */ | |
| reg_val = IXGBE_READ_REG(hw, IXGBE_RXCTRL); | |
| reg_val &= ~(IXGBE_RXCTRL_RXEN); | |
| IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val); | |
| IXGBE_WRITE_FLUSH(hw); | |
| msleep(2); | |
| /* Clear interrupt mask to stop from interrupts being generated */ | |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); | |
| /* Clear any pending interrupts */ | |
| IXGBE_READ_REG(hw, IXGBE_EICR); | |
| /* Disable the transmit unit. Each queue must be disabled. */ | |
| number_of_queues = hw->mac.max_tx_queues; | |
| for (i = 0; i < number_of_queues; i++) { | |
| reg_val = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i)); | |
| if (reg_val & IXGBE_TXDCTL_ENABLE) { | |
| reg_val &= ~IXGBE_TXDCTL_ENABLE; | |
| IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), reg_val); | |
| } | |
| } | |
| /* | |
| * Prevent the PCI-E bus from from hanging by disabling PCI-E master | |
| * access and verify no pending requests | |
| */ | |
| if (ixgbe_disable_pcie_master(hw) != 0) | |
| hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_led_on_generic - Turns on the software controllable LEDs. | |
| * @hw: pointer to hardware structure | |
| * @index: led number to turn on | |
| **/ | |
| s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index) | |
| { | |
| u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); | |
| /* To turn on the LED, set mode to ON. */ | |
| led_reg &= ~IXGBE_LED_MODE_MASK(index); | |
| led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index); | |
| IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); | |
| IXGBE_WRITE_FLUSH(hw); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_led_off_generic - Turns off the software controllable LEDs. | |
| * @hw: pointer to hardware structure | |
| * @index: led number to turn off | |
| **/ | |
| s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index) | |
| { | |
| u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); | |
| /* To turn off the LED, set mode to OFF. */ | |
| led_reg &= ~IXGBE_LED_MODE_MASK(index); | |
| led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index); | |
| IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); | |
| IXGBE_WRITE_FLUSH(hw); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_init_eeprom_params_generic - Initialize EEPROM params | |
| * @hw: pointer to hardware structure | |
| * | |
| * Initializes the EEPROM parameters ixgbe_eeprom_info within the | |
| * ixgbe_hw struct in order to set up EEPROM access. | |
| **/ | |
| s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) | |
| { | |
| struct ixgbe_eeprom_info *eeprom = &hw->eeprom; | |
| u32 eec; | |
| u16 eeprom_size; | |
| if (eeprom->type == ixgbe_eeprom_uninitialized) { | |
| eeprom->type = ixgbe_eeprom_none; | |
| /* Set default semaphore delay to 10ms which is a well | |
| * tested value */ | |
| eeprom->semaphore_delay = 10; | |
| /* | |
| * Check for EEPROM present first. | |
| * If not present leave as none | |
| */ | |
| eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
| if (eec & IXGBE_EEC_PRES) { | |
| eeprom->type = ixgbe_eeprom_spi; | |
| /* | |
| * SPI EEPROM is assumed here. This code would need to | |
| * change if a future EEPROM is not SPI. | |
| */ | |
| eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> | |
| IXGBE_EEC_SIZE_SHIFT); | |
| eeprom->word_size = 1 << (eeprom_size + | |
| IXGBE_EEPROM_WORD_SIZE_SHIFT); | |
| } | |
| if (eec & IXGBE_EEC_ADDR_SIZE) | |
| eeprom->address_bits = 16; | |
| else | |
| eeprom->address_bits = 8; | |
| hw_dbg(hw, "Eeprom params: type = %d, size = %d, address bits: " | |
| "%d\n", eeprom->type, eeprom->word_size, | |
| eeprom->address_bits); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang | |
| * @hw: pointer to hardware structure | |
| * @offset: offset within the EEPROM to be read | |
| * @data: read 16 bit value from EEPROM | |
| * | |
| * Reads 16 bit value from EEPROM through bit-bang method | |
| **/ | |
| s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, | |
| u16 *data) | |
| { | |
| s32 status; | |
| u16 word_in; | |
| u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI; | |
| hw->eeprom.ops.init_params(hw); | |
| if (offset >= hw->eeprom.word_size) { | |
| status = IXGBE_ERR_EEPROM; | |
| goto out; | |
| } | |
| /* Prepare the EEPROM for reading */ | |
| status = ixgbe_acquire_eeprom(hw); | |
| if (status == 0) { | |
| if (ixgbe_ready_eeprom(hw) != 0) { | |
| ixgbe_release_eeprom(hw); | |
| status = IXGBE_ERR_EEPROM; | |
| } | |
| } | |
| if (status == 0) { | |
| ixgbe_standby_eeprom(hw); | |
| /* | |
| * Some SPI eeproms use the 8th address bit embedded in the | |
| * opcode | |
| */ | |
| if ((hw->eeprom.address_bits == 8) && (offset >= 128)) | |
| read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; | |
| /* Send the READ command (opcode + addr) */ | |
| ixgbe_shift_out_eeprom_bits(hw, read_opcode, | |
| IXGBE_EEPROM_OPCODE_BITS); | |
| ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2), | |
| hw->eeprom.address_bits); | |
| /* Read the data. */ | |
| word_in = ixgbe_shift_in_eeprom_bits(hw, 16); | |
| *data = (word_in >> 8) | (word_in << 8); | |
| /* End this read operation */ | |
| ixgbe_release_eeprom(hw); | |
| } | |
| out: | |
| return status; | |
| } | |
| /** | |
| * ixgbe_read_eeprom_generic - Read EEPROM word using EERD | |
| * @hw: pointer to hardware structure | |
| * @offset: offset of word in the EEPROM to read | |
| * @data: word read from the EEPROM | |
| * | |
| * Reads a 16 bit word from the EEPROM using the EERD register. | |
| **/ | |
| s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) | |
| { | |
| u32 eerd; | |
| s32 status; | |
| hw->eeprom.ops.init_params(hw); | |
| if (offset >= hw->eeprom.word_size) { | |
| status = IXGBE_ERR_EEPROM; | |
| goto out; | |
| } | |
| eerd = (offset << IXGBE_EEPROM_READ_ADDR_SHIFT) + | |
| IXGBE_EEPROM_READ_REG_START; | |
| IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); | |
| status = ixgbe_poll_eeprom_eerd_done(hw); | |
| if (status == 0) | |
| *data = (IXGBE_READ_REG(hw, IXGBE_EERD) >> | |
| IXGBE_EEPROM_READ_REG_DATA); | |
| else | |
| hw_dbg(hw, "Eeprom read timed out\n"); | |
| out: | |
| return status; | |
| } | |
| /** | |
| * ixgbe_poll_eeprom_eerd_done - Poll EERD status | |
| * @hw: pointer to hardware structure | |
| * | |
| * Polls the status bit (bit 1) of the EERD to determine when the read is done. | |
| **/ | |
| static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw) | |
| { | |
| u32 i; | |
| u32 reg; | |
| s32 status = IXGBE_ERR_EEPROM; | |
| for (i = 0; i < IXGBE_EERD_ATTEMPTS; i++) { | |
| reg = IXGBE_READ_REG(hw, IXGBE_EERD); | |
| if (reg & IXGBE_EEPROM_READ_REG_DONE) { | |
| status = 0; | |
| break; | |
| } | |
| udelay(5); | |
| } | |
| return status; | |
| } | |
| /** | |
| * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang | |
| * @hw: pointer to hardware structure | |
| * | |
| * Prepares EEPROM for access using bit-bang method. This function should | |
| * be called before issuing a command to the EEPROM. | |
| **/ | |
| static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) | |
| { | |
| s32 status = 0; | |
| u32 eec; | |
| u32 i; | |
| if (ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0) | |
| status = IXGBE_ERR_SWFW_SYNC; | |
| if (status == 0) { | |
| eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
| /* Request EEPROM Access */ | |
| eec |= IXGBE_EEC_REQ; | |
| IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
| for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) { | |
| eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
| if (eec & IXGBE_EEC_GNT) | |
| break; | |
| udelay(5); | |
| } | |
| /* Release if grant not acquired */ | |
| if (!(eec & IXGBE_EEC_GNT)) { | |
| eec &= ~IXGBE_EEC_REQ; | |
| IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
| hw_dbg(hw, "Could not acquire EEPROM grant\n"); | |
| ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); | |
| status = IXGBE_ERR_EEPROM; | |
| } | |
| } | |
| /* Setup EEPROM for Read/Write */ | |
| if (status == 0) { | |
| /* Clear CS and SK */ | |
| eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK); | |
| IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
| IXGBE_WRITE_FLUSH(hw); | |
| udelay(1); | |
| } | |
| return status; | |
| } | |
| /** | |
| * ixgbe_get_eeprom_semaphore - Get hardware semaphore | |
| * @hw: pointer to hardware structure | |
| * | |
| * Sets the hardware semaphores so EEPROM access can occur for bit-bang method | |
| **/ | |
| static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) | |
| { | |
| s32 status = IXGBE_ERR_EEPROM; | |
| u32 timeout; | |
| u32 i; | |
| u32 swsm; | |
| /* Set timeout value based on size of EEPROM */ | |
| timeout = hw->eeprom.word_size + 1; | |
| /* Get SMBI software semaphore between device drivers first */ | |
| for (i = 0; i < timeout; i++) { | |
| /* | |
| * If the SMBI bit is 0 when we read it, then the bit will be | |
| * set and we have the semaphore | |
| */ | |
| swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); | |
| if (!(swsm & IXGBE_SWSM_SMBI)) { | |
| status = 0; | |
| break; | |
| } | |
| msleep(1); | |
| } | |
| /* Now get the semaphore between SW/FW through the SWESMBI bit */ | |
| if (status == 0) { | |
| for (i = 0; i < timeout; i++) { | |
| swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); | |
| /* Set the SW EEPROM semaphore bit to request access */ | |
| swsm |= IXGBE_SWSM_SWESMBI; | |
| IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); | |
| /* | |
| * If we set the bit successfully then we got the | |
| * semaphore. | |
| */ | |
| swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); | |
| if (swsm & IXGBE_SWSM_SWESMBI) | |
| break; | |
| udelay(50); | |
| } | |
| /* | |
| * Release semaphores and return error if SW EEPROM semaphore | |
| * was not granted because we don't have access to the EEPROM | |
| */ | |
| if (i >= timeout) { | |
| hw_dbg(hw, "Driver can't access the Eeprom - Semaphore " | |
| "not granted.\n"); | |
| ixgbe_release_eeprom_semaphore(hw); | |
| status = IXGBE_ERR_EEPROM; | |
| } | |
| } | |
| return status; | |
| } | |
| /** | |
| * ixgbe_release_eeprom_semaphore - Release hardware semaphore | |
| * @hw: pointer to hardware structure | |
| * | |
| * This function clears hardware semaphore bits. | |
| **/ | |
| static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw) | |
| { | |
| u32 swsm; | |
| swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); | |
| /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */ | |
| swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI); | |
| IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); | |
| IXGBE_WRITE_FLUSH(hw); | |
| } | |
| /** | |
| * ixgbe_ready_eeprom - Polls for EEPROM ready | |
| * @hw: pointer to hardware structure | |
| **/ | |
| static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw) | |
| { | |
| s32 status = 0; | |
| u16 i; | |
| u8 spi_stat_reg; | |
| /* | |
| * Read "Status Register" repeatedly until the LSB is cleared. The | |
| * EEPROM will signal that the command has been completed by clearing | |
| * bit 0 of the internal status register. If it's not cleared within | |
| * 5 milliseconds, then error out. | |
| */ | |
| for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) { | |
| ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI, | |
| IXGBE_EEPROM_OPCODE_BITS); | |
| spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8); | |
| if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI)) | |
| break; | |
| udelay(5); | |
| ixgbe_standby_eeprom(hw); | |
| }; | |
| /* | |
| * On some parts, SPI write time could vary from 0-20mSec on 3.3V | |
| * devices (and only 0-5mSec on 5V devices) | |
| */ | |
| if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) { | |
| hw_dbg(hw, "SPI EEPROM Status error\n"); | |
| status = IXGBE_ERR_EEPROM; | |
| } | |
| return status; | |
| } | |
| /** | |
| * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state | |
| * @hw: pointer to hardware structure | |
| **/ | |
| static void ixgbe_standby_eeprom(struct ixgbe_hw *hw) | |
| { | |
| u32 eec; | |
| eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
| /* Toggle CS to flush commands */ | |
| eec |= IXGBE_EEC_CS; | |
| IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
| IXGBE_WRITE_FLUSH(hw); | |
| udelay(1); | |
| eec &= ~IXGBE_EEC_CS; | |
| IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
| IXGBE_WRITE_FLUSH(hw); | |
| udelay(1); | |
| } | |
| /** | |
| * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM. | |
| * @hw: pointer to hardware structure | |
| * @data: data to send to the EEPROM | |
| * @count: number of bits to shift out | |
| **/ | |
| static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, | |
| u16 count) | |
| { | |
| u32 eec; | |
| u32 mask; | |
| u32 i; | |
| eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
| /* | |
| * Mask is used to shift "count" bits of "data" out to the EEPROM | |
| * one bit at a time. Determine the starting bit based on count | |
| */ | |
| mask = 0x01 << (count - 1); | |
| for (i = 0; i < count; i++) { | |
| /* | |
| * A "1" is shifted out to the EEPROM by setting bit "DI" to a | |
| * "1", and then raising and then lowering the clock (the SK | |
| * bit controls the clock input to the EEPROM). A "0" is | |
| * shifted out to the EEPROM by setting "DI" to "0" and then | |
| * raising and then lowering the clock. | |
| */ | |
| if (data & mask) | |
| eec |= IXGBE_EEC_DI; | |
| else | |
| eec &= ~IXGBE_EEC_DI; | |
| IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
| IXGBE_WRITE_FLUSH(hw); | |
| udelay(1); | |
| ixgbe_raise_eeprom_clk(hw, &eec); | |
| ixgbe_lower_eeprom_clk(hw, &eec); | |
| /* | |
| * Shift mask to signify next bit of data to shift in to the | |
| * EEPROM | |
| */ | |
| mask = mask >> 1; | |
| }; | |
| /* We leave the "DI" bit set to "0" when we leave this routine. */ | |
| eec &= ~IXGBE_EEC_DI; | |
| IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
| IXGBE_WRITE_FLUSH(hw); | |
| } | |
| /** | |
| * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM | |
| * @hw: pointer to hardware structure | |
| **/ | |
| static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count) | |
| { | |
| u32 eec; | |
| u32 i; | |
| u16 data = 0; | |
| /* | |
| * In order to read a register from the EEPROM, we need to shift | |
| * 'count' bits in from the EEPROM. Bits are "shifted in" by raising | |
| * the clock input to the EEPROM (setting the SK bit), and then reading | |
| * the value of the "DO" bit. During this "shifting in" process the | |
| * "DI" bit should always be clear. | |
| */ | |
| eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
| eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI); | |
| for (i = 0; i < count; i++) { | |
| data = data << 1; | |
| ixgbe_raise_eeprom_clk(hw, &eec); | |
| eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
| eec &= ~(IXGBE_EEC_DI); | |
| if (eec & IXGBE_EEC_DO) | |
| data |= 1; | |
| ixgbe_lower_eeprom_clk(hw, &eec); | |
| } | |
| return data; | |
| } | |
| /** | |
| * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input. | |
| * @hw: pointer to hardware structure | |
| * @eec: EEC register's current value | |
| **/ | |
| static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) | |
| { | |
| /* | |
| * Raise the clock input to the EEPROM | |
| * (setting the SK bit), then delay | |
| */ | |
| *eec = *eec | IXGBE_EEC_SK; | |
| IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); | |
| IXGBE_WRITE_FLUSH(hw); | |
| udelay(1); | |
| } | |
| /** | |
| * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input. | |
| * @hw: pointer to hardware structure | |
| * @eecd: EECD's current value | |
| **/ | |
| static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) | |
| { | |
| /* | |
| * Lower the clock input to the EEPROM (clearing the SK bit), then | |
| * delay | |
| */ | |
| *eec = *eec & ~IXGBE_EEC_SK; | |
| IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); | |
| IXGBE_WRITE_FLUSH(hw); | |
| udelay(1); | |
| } | |
| /** | |
| * ixgbe_release_eeprom - Release EEPROM, release semaphores | |
| * @hw: pointer to hardware structure | |
| **/ | |
| static void ixgbe_release_eeprom(struct ixgbe_hw *hw) | |
| { | |
| u32 eec; | |
| eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
| eec |= IXGBE_EEC_CS; /* Pull CS high */ | |
| eec &= ~IXGBE_EEC_SK; /* Lower SCK */ | |
| IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
| IXGBE_WRITE_FLUSH(hw); | |
| udelay(1); | |
| /* Stop requesting EEPROM access */ | |
| eec &= ~IXGBE_EEC_REQ; | |
| IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
| ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); | |
| } | |
| /** | |
| * ixgbe_calc_eeprom_checksum - Calculates and returns the checksum | |
| * @hw: pointer to hardware structure | |
| **/ | |
| static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw) | |
| { | |
| u16 i; | |
| u16 j; | |
| u16 checksum = 0; | |
| u16 length = 0; | |
| u16 pointer = 0; | |
| u16 word = 0; | |
| /* Include 0x0-0x3F in the checksum */ | |
| for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) { | |
| if (hw->eeprom.ops.read(hw, i, &word) != 0) { | |
| hw_dbg(hw, "EEPROM read failed\n"); | |
| break; | |
| } | |
| checksum += word; | |
| } | |
| /* Include all data from pointers except for the fw pointer */ | |
| for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { | |
| hw->eeprom.ops.read(hw, i, &pointer); | |
| /* Make sure the pointer seems valid */ | |
| if (pointer != 0xFFFF && pointer != 0) { | |
| hw->eeprom.ops.read(hw, pointer, &length); | |
| if (length != 0xFFFF && length != 0) { | |
| for (j = pointer+1; j <= pointer+length; j++) { | |
| hw->eeprom.ops.read(hw, j, &word); | |
| checksum += word; | |
| } | |
| } | |
| } | |
| } | |
| checksum = (u16)IXGBE_EEPROM_SUM - checksum; | |
| return checksum; | |
| } | |
| /** | |
| * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum | |
| * @hw: pointer to hardware structure | |
| * @checksum_val: calculated checksum | |
| * | |
| * Performs checksum calculation and validates the EEPROM checksum. If the | |
| * caller does not need checksum_val, the value can be NULL. | |
| **/ | |
| s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, | |
| u16 *checksum_val) | |
| { | |
| s32 status; | |
| u16 checksum; | |
| u16 read_checksum = 0; | |
| /* | |
| * Read the first word from the EEPROM. If this times out or fails, do | |
| * not continue or we could be in for a very long wait while every | |
| * EEPROM read fails | |
| */ | |
| status = hw->eeprom.ops.read(hw, 0, &checksum); | |
| if (status == 0) { | |
| checksum = ixgbe_calc_eeprom_checksum(hw); | |
| hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum); | |
| /* | |
| * Verify read checksum from EEPROM is the same as | |
| * calculated checksum | |
| */ | |
| if (read_checksum != checksum) | |
| status = IXGBE_ERR_EEPROM_CHECKSUM; | |
| /* If the user cares, return the calculated checksum */ | |
| if (checksum_val) | |
| *checksum_val = checksum; | |
| } else { | |
| hw_dbg(hw, "EEPROM read failed\n"); | |
| } | |
| return status; | |
| } | |
| /** | |
| * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum | |
| * @hw: pointer to hardware structure | |
| **/ | |
| s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) | |
| { | |
| s32 status; | |
| u16 checksum; | |
| /* | |
| * Read the first word from the EEPROM. If this times out or fails, do | |
| * not continue or we could be in for a very long wait while every | |
| * EEPROM read fails | |
| */ | |
| status = hw->eeprom.ops.read(hw, 0, &checksum); | |
| if (status == 0) { | |
| checksum = ixgbe_calc_eeprom_checksum(hw); | |
| status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM, | |
| checksum); | |
| } else { | |
| hw_dbg(hw, "EEPROM read failed\n"); | |
| } | |
| return status; | |
| } | |
| /** | |
| * ixgbe_validate_mac_addr - Validate MAC address | |
| * @mac_addr: pointer to MAC address. | |
| * | |
| * Tests a MAC address to ensure it is a valid Individual Address | |
| **/ | |
| s32 ixgbe_validate_mac_addr(u8 *mac_addr) | |
| { | |
| s32 status = 0; | |
| /* Make sure it is not a multicast address */ | |
| if (IXGBE_IS_MULTICAST(mac_addr)) | |
| status = IXGBE_ERR_INVALID_MAC_ADDR; | |
| /* Not a broadcast address */ | |
| else if (IXGBE_IS_BROADCAST(mac_addr)) | |
| status = IXGBE_ERR_INVALID_MAC_ADDR; | |
| /* Reject the zero address */ | |
| else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 && | |
| mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) | |
| status = IXGBE_ERR_INVALID_MAC_ADDR; | |
| return status; | |
| } | |
| /** | |
| * ixgbe_set_rar_generic - Set Rx address register | |
| * @hw: pointer to hardware structure | |
| * @index: Receive address register to write | |
| * @addr: Address to put into receive address register | |
| * @vmdq: VMDq "set" or "pool" index | |
| * @enable_addr: set flag that address is active | |
| * | |
| * Puts an ethernet address into a receive address register. | |
| **/ | |
| s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, | |
| u32 enable_addr) | |
| { | |
| u32 rar_low, rar_high; | |
| u32 rar_entries = hw->mac.num_rar_entries; | |
| /* setup VMDq pool selection before this RAR gets enabled */ | |
| hw->mac.ops.set_vmdq(hw, index, vmdq); | |
| /* Make sure we are using a valid rar index range */ | |
| if (index < rar_entries) { | |
| /* | |
| * HW expects these in little endian so we reverse the byte | |
| * order from network order (big endian) to little endian | |
| */ | |
| rar_low = ((u32)addr[0] | | |
| ((u32)addr[1] << 8) | | |
| ((u32)addr[2] << 16) | | |
| ((u32)addr[3] << 24)); | |
| /* | |
| * Some parts put the VMDq setting in the extra RAH bits, | |
| * so save everything except the lower 16 bits that hold part | |
| * of the address and the address valid bit. | |
| */ | |
| rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); | |
| rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); | |
| rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8)); | |
| if (enable_addr != 0) | |
| rar_high |= IXGBE_RAH_AV; | |
| IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low); | |
| IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); | |
| } else { | |
| hw_dbg(hw, "RAR index %d is out of range.\n", index); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_clear_rar_generic - Remove Rx address register | |
| * @hw: pointer to hardware structure | |
| * @index: Receive address register to write | |
| * | |
| * Clears an ethernet address from a receive address register. | |
| **/ | |
| s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) | |
| { | |
| u32 rar_high; | |
| u32 rar_entries = hw->mac.num_rar_entries; | |
| /* Make sure we are using a valid rar index range */ | |
| if (index < rar_entries) { | |
| /* | |
| * Some parts put the VMDq setting in the extra RAH bits, | |
| * so save everything except the lower 16 bits that hold part | |
| * of the address and the address valid bit. | |
| */ | |
| rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); | |
| rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); | |
| IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0); | |
| IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); | |
| } else { | |
| hw_dbg(hw, "RAR index %d is out of range.\n", index); | |
| } | |
| /* clear VMDq pool/queue selection for this RAR */ | |
| hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_enable_rar - Enable Rx address register | |
| * @hw: pointer to hardware structure | |
| * @index: index into the RAR table | |
| * | |
| * Enables the select receive address register. | |
| **/ | |
| static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index) | |
| { | |
| u32 rar_high; | |
| rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); | |
| rar_high |= IXGBE_RAH_AV; | |
| IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); | |
| } | |
| /** | |
| * ixgbe_disable_rar - Disable Rx address register | |
| * @hw: pointer to hardware structure | |
| * @index: index into the RAR table | |
| * | |
| * Disables the select receive address register. | |
| **/ | |
| static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index) | |
| { | |
| u32 rar_high; | |
| rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); | |
| rar_high &= (~IXGBE_RAH_AV); | |
| IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); | |
| } | |
| /** | |
| * ixgbe_init_rx_addrs_generic - Initializes receive address filters. | |
| * @hw: pointer to hardware structure | |
| * | |
| * Places the MAC address in receive address register 0 and clears the rest | |
| * of the receive address registers. Clears the multicast table. Assumes | |
| * the receiver is in reset when the routine is called. | |
| **/ | |
| s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) | |
| { | |
| u32 i; | |
| u32 rar_entries = hw->mac.num_rar_entries; | |
| /* | |
| * If the current mac address is valid, assume it is a software override | |
| * to the permanent address. | |
| * Otherwise, use the permanent address from the eeprom. | |
| */ | |
| if (ixgbe_validate_mac_addr(hw->mac.addr) == | |
| IXGBE_ERR_INVALID_MAC_ADDR) { | |
| /* Get the MAC address from the RAR0 for later reference */ | |
| hw->mac.ops.get_mac_addr(hw, hw->mac.addr); | |
| hw_dbg(hw, " Keeping Current RAR0 Addr =%.2X %.2X %.2X ", | |
| hw->mac.addr[0], hw->mac.addr[1], | |
| hw->mac.addr[2]); | |
| hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3], | |
| hw->mac.addr[4], hw->mac.addr[5]); | |
| } else { | |
| /* Setup the receive address. */ | |
| hw_dbg(hw, "Overriding MAC Address in RAR[0]\n"); | |
| hw_dbg(hw, " New MAC Addr =%.2X %.2X %.2X ", | |
| hw->mac.addr[0], hw->mac.addr[1], | |
| hw->mac.addr[2]); | |
| hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3], | |
| hw->mac.addr[4], hw->mac.addr[5]); | |
| hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV); | |
| } | |
| hw->addr_ctrl.overflow_promisc = 0; | |
| hw->addr_ctrl.rar_used_count = 1; | |
| /* Zero out the other receive addresses. */ | |
| hw_dbg(hw, "Clearing RAR[1-%d]\n", rar_entries - 1); | |
| for (i = 1; i < rar_entries; i++) { | |
| IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); | |
| IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); | |
| } | |
| /* Clear the MTA */ | |
| hw->addr_ctrl.mc_addr_in_rar_count = 0; | |
| hw->addr_ctrl.mta_in_use = 0; | |
| IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); | |
| hw_dbg(hw, " Clearing MTA\n"); | |
| for (i = 0; i < hw->mac.mcft_size; i++) | |
| IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); | |
| if (hw->mac.ops.init_uta_tables) | |
| hw->mac.ops.init_uta_tables(hw); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_add_uc_addr - Adds a secondary unicast address. | |
| * @hw: pointer to hardware structure | |
| * @addr: new address | |
| * | |
| * Adds it to unused receive address register or goes into promiscuous mode. | |
| **/ | |
| static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) | |
| { | |
| u32 rar_entries = hw->mac.num_rar_entries; | |
| u32 rar; | |
| hw_dbg(hw, " UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n", | |
| addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); | |
| /* | |
| * Place this address in the RAR if there is room, | |
| * else put the controller into promiscuous mode | |
| */ | |
| if (hw->addr_ctrl.rar_used_count < rar_entries) { | |
| rar = hw->addr_ctrl.rar_used_count - | |
| hw->addr_ctrl.mc_addr_in_rar_count; | |
| hw->mac.ops.set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV); | |
| hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar); | |
| hw->addr_ctrl.rar_used_count++; | |
| } else { | |
| hw->addr_ctrl.overflow_promisc++; | |
| } | |
| hw_dbg(hw, "ixgbe_add_uc_addr Complete\n"); | |
| } | |
| /** | |
| * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses | |
| * @hw: pointer to hardware structure | |
| * @addr_list: the list of new addresses | |
| * @addr_count: number of addresses | |
| * @next: iterator function to walk the address list | |
| * | |
| * The given list replaces any existing list. Clears the secondary addrs from | |
| * receive address registers. Uses unused receive address registers for the | |
| * first secondary addresses, and falls back to promiscuous mode as needed. | |
| * | |
| * Drivers using secondary unicast addresses must set user_set_promisc when | |
| * manually putting the device into promiscuous mode. | |
| **/ | |
| s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list, | |
| u32 addr_count, ixgbe_mc_addr_itr next) | |
| { | |
| u8 *addr; | |
| u32 i; | |
| u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc; | |
| u32 uc_addr_in_use; | |
| u32 fctrl; | |
| u32 vmdq; | |
| /* | |
| * Clear accounting of old secondary address list, | |
| * don't count RAR[0] | |
| */ | |
| uc_addr_in_use = hw->addr_ctrl.rar_used_count - | |
| hw->addr_ctrl.mc_addr_in_rar_count - 1; | |
| hw->addr_ctrl.rar_used_count -= uc_addr_in_use; | |
| hw->addr_ctrl.overflow_promisc = 0; | |
| /* Zero out the other receive addresses */ | |
| hw_dbg(hw, "Clearing RAR[1-%d]\n", uc_addr_in_use); | |
| for (i = 1; i <= uc_addr_in_use; i++) { | |
| IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); | |
| IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); | |
| } | |
| /* Add the new addresses */ | |
| for (i = 0; i < addr_count; i++) { | |
| hw_dbg(hw, " Adding the secondary addresses:\n"); | |
| addr = next(hw, &addr_list, &vmdq); | |
| ixgbe_add_uc_addr(hw, addr, vmdq); | |
| } | |
| if (hw->addr_ctrl.overflow_promisc) { | |
| /* enable promisc if not already in overflow or set by user */ | |
| if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { | |
| hw_dbg(hw, " Entering address overflow promisc mode\n"); | |
| fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); | |
| fctrl |= IXGBE_FCTRL_UPE; | |
| IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); | |
| } | |
| } else { | |
| /* only disable if set by overflow, not by user */ | |
| if (old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { | |
| hw_dbg(hw, " Leaving address overflow promisc mode\n"); | |
| fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); | |
| fctrl &= ~IXGBE_FCTRL_UPE; | |
| IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); | |
| } | |
| } | |
| hw_dbg(hw, "ixgbe_update_uc_addr_list_generic Complete\n"); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_mta_vector - Determines bit-vector in multicast table to set | |
| * @hw: pointer to hardware structure | |
| * @mc_addr: the multicast address | |
| * | |
| * Extracts the 12 bits, from a multicast address, to determine which | |
| * bit-vector to set in the multicast table. The hardware uses 12 bits, from | |
| * incoming rx multicast addresses, to determine the bit-vector to check in | |
| * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set | |
| * by the MO field of the MCSTCTRL. The MO field is set during initialization | |
| * to mc_filter_type. | |
| **/ | |
| static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) | |
| { | |
| u32 vector = 0; | |
| switch (hw->mac.mc_filter_type) { | |
| case 0: /* use bits [47:36] of the address */ | |
| vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); | |
| break; | |
| case 1: /* use bits [46:35] of the address */ | |
| vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); | |
| break; | |
| case 2: /* use bits [45:34] of the address */ | |
| vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); | |
| break; | |
| case 3: /* use bits [43:32] of the address */ | |
| vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); | |
| break; | |
| default: /* Invalid mc_filter_type */ | |
| hw_dbg(hw, "MC filter type param set incorrectly\n"); | |
| break; | |
| } | |
| /* vector can only be 12-bits or boundary will be exceeded */ | |
| vector &= 0xFFF; | |
| return vector; | |
| } | |
| /** | |
| * ixgbe_set_mta - Set bit-vector in multicast table | |
| * @hw: pointer to hardware structure | |
| * @hash_value: Multicast address hash value | |
| * | |
| * Sets the bit-vector in the multicast table. | |
| **/ | |
| static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) | |
| { | |
| u32 vector; | |
| u32 vector_bit; | |
| u32 vector_reg; | |
| u32 mta_reg; | |
| hw->addr_ctrl.mta_in_use++; | |
| vector = ixgbe_mta_vector(hw, mc_addr); | |
| hw_dbg(hw, " bit-vector = 0x%03X\n", vector); | |
| /* | |
| * The MTA is a register array of 128 32-bit registers. It is treated | |
| * like an array of 4096 bits. We want to set bit | |
| * BitArray[vector_value]. So we figure out what register the bit is | |
| * in, read it, OR in the new bit, then write back the new value. The | |
| * register is determined by the upper 7 bits of the vector value and | |
| * the bit within that register are determined by the lower 5 bits of | |
| * the value. | |
| */ | |
| vector_reg = (vector >> 5) & 0x7F; | |
| vector_bit = vector & 0x1F; | |
| mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg)); | |
| mta_reg |= (1 << vector_bit); | |
| IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg); | |
| } | |
| /** | |
| * ixgbe_add_mc_addr - Adds a multicast address. | |
| * @hw: pointer to hardware structure | |
| * @mc_addr: new multicast address | |
| * | |
| * Adds it to unused receive address register or to the multicast table. | |
| **/ | |
| static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr) | |
| { | |
| u32 rar_entries = hw->mac.num_rar_entries; | |
| u32 rar; | |
| hw_dbg(hw, " MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n", | |
| mc_addr[0], mc_addr[1], mc_addr[2], | |
| mc_addr[3], mc_addr[4], mc_addr[5]); | |
| /* | |
| * Place this multicast address in the RAR if there is room, | |
| * else put it in the MTA | |
| */ | |
| if (hw->addr_ctrl.rar_used_count < rar_entries) { | |
| /* use RAR from the end up for multicast */ | |
| rar = rar_entries - hw->addr_ctrl.mc_addr_in_rar_count - 1; | |
| hw->mac.ops.set_rar(hw, rar, mc_addr, 0, IXGBE_RAH_AV); | |
| hw_dbg(hw, "Added a multicast address to RAR[%d]\n", rar); | |
| hw->addr_ctrl.rar_used_count++; | |
| hw->addr_ctrl.mc_addr_in_rar_count++; | |
| } else { | |
| ixgbe_set_mta(hw, mc_addr); | |
| } | |
| hw_dbg(hw, "ixgbe_add_mc_addr Complete\n"); | |
| } | |
| /** | |
| * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses | |
| * @hw: pointer to hardware structure | |
| * @mc_addr_list: the list of new multicast addresses | |
| * @mc_addr_count: number of addresses | |
| * @next: iterator function to walk the multicast address list | |
| * | |
| * The given list replaces any existing list. Clears the MC addrs from receive | |
| * address registers and the multicast table. Uses unused receive address | |
| * registers for the first multicast addresses, and hashes the rest into the | |
| * multicast table. | |
| **/ | |
| s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list, | |
| u32 mc_addr_count, ixgbe_mc_addr_itr next) | |
| { | |
| u32 i; | |
| u32 rar_entries = hw->mac.num_rar_entries; | |
| u32 vmdq; | |
| /* | |
| * Set the new number of MC addresses that we are being requested to | |
| * use. | |
| */ | |
| hw->addr_ctrl.num_mc_addrs = mc_addr_count; | |
| hw->addr_ctrl.rar_used_count -= hw->addr_ctrl.mc_addr_in_rar_count; | |
| hw->addr_ctrl.mc_addr_in_rar_count = 0; | |
| hw->addr_ctrl.mta_in_use = 0; | |
| /* Zero out the other receive addresses. */ | |
| hw_dbg(hw, "Clearing RAR[%d-%d]\n", hw->addr_ctrl.rar_used_count, | |
| rar_entries - 1); | |
| for (i = hw->addr_ctrl.rar_used_count; i < rar_entries; i++) { | |
| IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); | |
| IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); | |
| } | |
| /* Clear the MTA */ | |
| hw_dbg(hw, " Clearing MTA\n"); | |
| for (i = 0; i < hw->mac.mcft_size; i++) | |
| IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); | |
| /* Add the new addresses */ | |
| for (i = 0; i < mc_addr_count; i++) { | |
| hw_dbg(hw, " Adding the multicast addresses:\n"); | |
| ixgbe_add_mc_addr(hw, next(hw, &mc_addr_list, &vmdq)); | |
| } | |
| /* Enable mta */ | |
| if (hw->addr_ctrl.mta_in_use > 0) | |
| IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, | |
| IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type); | |
| hw_dbg(hw, "ixgbe_update_mc_addr_list_generic Complete\n"); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_enable_mc_generic - Enable multicast address in RAR | |
| * @hw: pointer to hardware structure | |
| * | |
| * Enables multicast address in RAR and the use of the multicast hash table. | |
| **/ | |
| s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw) | |
| { | |
| u32 i; | |
| u32 rar_entries = hw->mac.num_rar_entries; | |
| struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; | |
| if (a->mc_addr_in_rar_count > 0) | |
| for (i = (rar_entries - a->mc_addr_in_rar_count); | |
| i < rar_entries; i++) | |
| ixgbe_enable_rar(hw, i); | |
| if (a->mta_in_use > 0) | |
| IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE | | |
| hw->mac.mc_filter_type); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_disable_mc_generic - Disable multicast address in RAR | |
| * @hw: pointer to hardware structure | |
| * | |
| * Disables multicast address in RAR and the use of the multicast hash table. | |
| **/ | |
| s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw) | |
| { | |
| u32 i; | |
| u32 rar_entries = hw->mac.num_rar_entries; | |
| struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; | |
| if (a->mc_addr_in_rar_count > 0) | |
| for (i = (rar_entries - a->mc_addr_in_rar_count); | |
| i < rar_entries; i++) | |
| ixgbe_disable_rar(hw, i); | |
| if (a->mta_in_use > 0) | |
| IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_disable_pcie_master - Disable PCI-express master access | |
| * @hw: pointer to hardware structure | |
| * | |
| * Disables PCI-Express master access and verifies there are no pending | |
| * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable | |
| * bit hasn't caused the master requests to be disabled, else 0 | |
| * is returned signifying master requests disabled. | |
| **/ | |
| s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) | |
| { | |
| u32 i; | |
| u32 reg_val; | |
| u32 number_of_queues; | |
| s32 status = IXGBE_ERR_MASTER_REQUESTS_PENDING; | |
| /* Disable the receive unit by stopping each queue */ | |
| number_of_queues = hw->mac.max_rx_queues; | |
| for (i = 0; i < number_of_queues; i++) { | |
| reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); | |
| if (reg_val & IXGBE_RXDCTL_ENABLE) { | |
| reg_val &= ~IXGBE_RXDCTL_ENABLE; | |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val); | |
| } | |
| } | |
| reg_val = IXGBE_READ_REG(hw, IXGBE_CTRL); | |
| reg_val |= IXGBE_CTRL_GIO_DIS; | |
| IXGBE_WRITE_REG(hw, IXGBE_CTRL, reg_val); | |
| for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { | |
| if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) { | |
| status = 0; | |
| break; | |
| } | |
| udelay(100); | |
| } | |
| return status; | |
| } | |
| /** | |
| * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore | |
| * @hw: pointer to hardware structure | |
| * @mask: Mask to specify which semaphore to acquire | |
| * | |
| * Acquires the SWFW semaphore thought the GSSR register for the specified | |
| * function (CSR, PHY0, PHY1, EEPROM, Flash) | |
| **/ | |
| s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) | |
| { | |
| u32 gssr; | |
| u32 swmask = mask; | |
| u32 fwmask = mask << 5; | |
| s32 timeout = 200; | |
| while (timeout) { | |
| if (ixgbe_get_eeprom_semaphore(hw)) | |
| return -IXGBE_ERR_SWFW_SYNC; | |
| gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); | |
| if (!(gssr & (fwmask | swmask))) | |
| break; | |
| /* | |
| * Firmware currently using resource (fwmask) or other software | |
| * thread currently using resource (swmask) | |
| */ | |
| ixgbe_release_eeprom_semaphore(hw); | |
| msleep(5); | |
| timeout--; | |
| } | |
| if (!timeout) { | |
| hw_dbg(hw, "Driver can't access resource, GSSR timeout.\n"); | |
| return -IXGBE_ERR_SWFW_SYNC; | |
| } | |
| gssr |= swmask; | |
| IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); | |
| ixgbe_release_eeprom_semaphore(hw); | |
| return 0; | |
| } | |
| /** | |
| * ixgbe_release_swfw_sync - Release SWFW semaphore | |
| * @hw: pointer to hardware structure | |
| * @mask: Mask to specify which semaphore to release | |
| * | |
| * Releases the SWFW semaphore thought the GSSR register for the specified | |
| * function (CSR, PHY0, PHY1, EEPROM, Flash) | |
| **/ | |
| void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask) | |
| { | |
| u32 gssr; | |
| u32 swmask = mask; | |
| ixgbe_get_eeprom_semaphore(hw); | |
| gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); | |
| gssr &= ~swmask; | |
| IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); | |
| ixgbe_release_eeprom_semaphore(hw); | |
| } | |