| /* | |
| * Block driver for media (i.e., flash cards) | |
| * | |
| * Copyright 2002 Hewlett-Packard Company | |
| * Copyright 2005-2008 Pierre Ossman | |
| * | |
| * Use consistent with the GNU GPL is permitted, | |
| * provided that this copyright notice is | |
| * preserved in its entirety in all copies and derived works. | |
| * | |
| * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, | |
| * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS | |
| * FITNESS FOR ANY PARTICULAR PURPOSE. | |
| * | |
| * Many thanks to Alessandro Rubini and Jonathan Corbet! | |
| * | |
| * Author: Andrew Christian | |
| * 28 May 2002 | |
| */ | |
| #include <linux/moduleparam.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/fs.h> | |
| #include <linux/errno.h> | |
| #include <linux/hdreg.h> | |
| #include <linux/kdev_t.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/mutex.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/string_helpers.h> | |
| #include <linux/mmc/card.h> | |
| #include <linux/mmc/host.h> | |
| #include <linux/mmc/mmc.h> | |
| #include <linux/mmc/sd.h> | |
| #include <asm/system.h> | |
| #include <asm/uaccess.h> | |
| #include "queue.h" | |
| /* | |
| * max 8 partitions per card | |
| */ | |
| #define MMC_SHIFT 3 | |
| #define MMC_NUM_MINORS (256 >> MMC_SHIFT) | |
| static DECLARE_BITMAP(dev_use, MMC_NUM_MINORS); | |
| /* | |
| * There is one mmc_blk_data per slot. | |
| */ | |
| struct mmc_blk_data { | |
| spinlock_t lock; | |
| struct gendisk *disk; | |
| struct mmc_queue queue; | |
| unsigned int usage; | |
| unsigned int read_only; | |
| }; | |
| static DEFINE_MUTEX(open_lock); | |
| static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk) | |
| { | |
| struct mmc_blk_data *md; | |
| mutex_lock(&open_lock); | |
| md = disk->private_data; | |
| if (md && md->usage == 0) | |
| md = NULL; | |
| if (md) | |
| md->usage++; | |
| mutex_unlock(&open_lock); | |
| return md; | |
| } | |
| static void mmc_blk_put(struct mmc_blk_data *md) | |
| { | |
| mutex_lock(&open_lock); | |
| md->usage--; | |
| if (md->usage == 0) { | |
| int devidx = MINOR(disk_devt(md->disk)) >> MMC_SHIFT; | |
| __clear_bit(devidx, dev_use); | |
| put_disk(md->disk); | |
| kfree(md); | |
| } | |
| mutex_unlock(&open_lock); | |
| } | |
| static int mmc_blk_open(struct block_device *bdev, fmode_t mode) | |
| { | |
| struct mmc_blk_data *md = mmc_blk_get(bdev->bd_disk); | |
| int ret = -ENXIO; | |
| if (md) { | |
| if (md->usage == 2) | |
| check_disk_change(bdev); | |
| ret = 0; | |
| if ((mode & FMODE_WRITE) && md->read_only) { | |
| mmc_blk_put(md); | |
| ret = -EROFS; | |
| } | |
| } | |
| return ret; | |
| } | |
| static int mmc_blk_release(struct gendisk *disk, fmode_t mode) | |
| { | |
| struct mmc_blk_data *md = disk->private_data; | |
| mmc_blk_put(md); | |
| return 0; | |
| } | |
| static int | |
| mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo) | |
| { | |
| geo->cylinders = get_capacity(bdev->bd_disk) / (4 * 16); | |
| geo->heads = 4; | |
| geo->sectors = 16; | |
| return 0; | |
| } | |
| static struct block_device_operations mmc_bdops = { | |
| .open = mmc_blk_open, | |
| .release = mmc_blk_release, | |
| .getgeo = mmc_blk_getgeo, | |
| .owner = THIS_MODULE, | |
| }; | |
| struct mmc_blk_request { | |
| struct mmc_request mrq; | |
| struct mmc_command cmd; | |
| struct mmc_command stop; | |
| struct mmc_data data; | |
| }; | |
| static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) | |
| { | |
| int err; | |
| __be32 blocks; | |
| struct mmc_request mrq; | |
| struct mmc_command cmd; | |
| struct mmc_data data; | |
| unsigned int timeout_us; | |
| struct scatterlist sg; | |
| memset(&cmd, 0, sizeof(struct mmc_command)); | |
| cmd.opcode = MMC_APP_CMD; | |
| cmd.arg = card->rca << 16; | |
| cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; | |
| err = mmc_wait_for_cmd(card->host, &cmd, 0); | |
| if (err) | |
| return (u32)-1; | |
| if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD)) | |
| return (u32)-1; | |
| memset(&cmd, 0, sizeof(struct mmc_command)); | |
| cmd.opcode = SD_APP_SEND_NUM_WR_BLKS; | |
| cmd.arg = 0; | |
| cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; | |
| memset(&data, 0, sizeof(struct mmc_data)); | |
| data.timeout_ns = card->csd.tacc_ns * 100; | |
| data.timeout_clks = card->csd.tacc_clks * 100; | |
| timeout_us = data.timeout_ns / 1000; | |
| timeout_us += data.timeout_clks * 1000 / | |
| (card->host->ios.clock / 1000); | |
| if (timeout_us > 100000) { | |
| data.timeout_ns = 100000000; | |
| data.timeout_clks = 0; | |
| } | |
| data.blksz = 4; | |
| data.blocks = 1; | |
| data.flags = MMC_DATA_READ; | |
| data.sg = &sg; | |
| data.sg_len = 1; | |
| memset(&mrq, 0, sizeof(struct mmc_request)); | |
| mrq.cmd = &cmd; | |
| mrq.data = &data; | |
| sg_init_one(&sg, &blocks, 4); | |
| mmc_wait_for_req(card->host, &mrq); | |
| if (cmd.error || data.error) | |
| return (u32)-1; | |
| return ntohl(blocks); | |
| } | |
| static u32 get_card_status(struct mmc_card *card, struct request *req) | |
| { | |
| struct mmc_command cmd; | |
| int err; | |
| memset(&cmd, 0, sizeof(struct mmc_command)); | |
| cmd.opcode = MMC_SEND_STATUS; | |
| if (!mmc_host_is_spi(card->host)) | |
| cmd.arg = card->rca << 16; | |
| cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; | |
| err = mmc_wait_for_cmd(card->host, &cmd, 0); | |
| if (err) | |
| printk(KERN_ERR "%s: error %d sending status comand", | |
| req->rq_disk->disk_name, err); | |
| return cmd.resp[0]; | |
| } | |
| static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) | |
| { | |
| struct mmc_blk_data *md = mq->data; | |
| struct mmc_card *card = md->queue.card; | |
| struct mmc_blk_request brq; | |
| int ret = 1, disable_multi = 0; | |
| mmc_claim_host(card->host); | |
| do { | |
| struct mmc_command cmd; | |
| u32 readcmd, writecmd, status = 0; | |
| memset(&brq, 0, sizeof(struct mmc_blk_request)); | |
| brq.mrq.cmd = &brq.cmd; | |
| brq.mrq.data = &brq.data; | |
| brq.cmd.arg = req->sector; | |
| if (!mmc_card_blockaddr(card)) | |
| brq.cmd.arg <<= 9; | |
| brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; | |
| brq.data.blksz = 512; | |
| brq.stop.opcode = MMC_STOP_TRANSMISSION; | |
| brq.stop.arg = 0; | |
| brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; | |
| brq.data.blocks = req->nr_sectors; | |
| /* | |
| * After a read error, we redo the request one sector at a time | |
| * in order to accurately determine which sectors can be read | |
| * successfully. | |
| */ | |
| if (disable_multi && brq.data.blocks > 1) | |
| brq.data.blocks = 1; | |
| if (brq.data.blocks > 1) { | |
| /* SPI multiblock writes terminate using a special | |
| * token, not a STOP_TRANSMISSION request. | |
| */ | |
| if (!mmc_host_is_spi(card->host) | |
| || rq_data_dir(req) == READ) | |
| brq.mrq.stop = &brq.stop; | |
| readcmd = MMC_READ_MULTIPLE_BLOCK; | |
| writecmd = MMC_WRITE_MULTIPLE_BLOCK; | |
| } else { | |
| brq.mrq.stop = NULL; | |
| readcmd = MMC_READ_SINGLE_BLOCK; | |
| writecmd = MMC_WRITE_BLOCK; | |
| } | |
| if (rq_data_dir(req) == READ) { | |
| brq.cmd.opcode = readcmd; | |
| brq.data.flags |= MMC_DATA_READ; | |
| } else { | |
| brq.cmd.opcode = writecmd; | |
| brq.data.flags |= MMC_DATA_WRITE; | |
| } | |
| mmc_set_data_timeout(&brq.data, card); | |
| brq.data.sg = mq->sg; | |
| brq.data.sg_len = mmc_queue_map_sg(mq); | |
| /* | |
| * Adjust the sg list so it is the same size as the | |
| * request. | |
| */ | |
| if (brq.data.blocks != req->nr_sectors) { | |
| int i, data_size = brq.data.blocks << 9; | |
| struct scatterlist *sg; | |
| for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) { | |
| data_size -= sg->length; | |
| if (data_size <= 0) { | |
| sg->length += data_size; | |
| i++; | |
| break; | |
| } | |
| } | |
| brq.data.sg_len = i; | |
| } | |
| mmc_queue_bounce_pre(mq); | |
| mmc_wait_for_req(card->host, &brq.mrq); | |
| mmc_queue_bounce_post(mq); | |
| /* | |
| * Check for errors here, but don't jump to cmd_err | |
| * until later as we need to wait for the card to leave | |
| * programming mode even when things go wrong. | |
| */ | |
| if (brq.cmd.error || brq.data.error || brq.stop.error) { | |
| if (brq.data.blocks > 1 && rq_data_dir(req) == READ) { | |
| /* Redo read one sector at a time */ | |
| printk(KERN_WARNING "%s: retrying using single " | |
| "block read\n", req->rq_disk->disk_name); | |
| disable_multi = 1; | |
| continue; | |
| } | |
| status = get_card_status(card, req); | |
| } | |
| if (brq.cmd.error) { | |
| printk(KERN_ERR "%s: error %d sending read/write " | |
| "command, response %#x, card status %#x\n", | |
| req->rq_disk->disk_name, brq.cmd.error, | |
| brq.cmd.resp[0], status); | |
| } | |
| if (brq.data.error) { | |
| if (brq.data.error == -ETIMEDOUT && brq.mrq.stop) | |
| /* 'Stop' response contains card status */ | |
| status = brq.mrq.stop->resp[0]; | |
| printk(KERN_ERR "%s: error %d transferring data," | |
| " sector %u, nr %u, card status %#x\n", | |
| req->rq_disk->disk_name, brq.data.error, | |
| (unsigned)req->sector, | |
| (unsigned)req->nr_sectors, status); | |
| } | |
| if (brq.stop.error) { | |
| printk(KERN_ERR "%s: error %d sending stop command, " | |
| "response %#x, card status %#x\n", | |
| req->rq_disk->disk_name, brq.stop.error, | |
| brq.stop.resp[0], status); | |
| } | |
| if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { | |
| do { | |
| int err; | |
| cmd.opcode = MMC_SEND_STATUS; | |
| cmd.arg = card->rca << 16; | |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; | |
| err = mmc_wait_for_cmd(card->host, &cmd, 5); | |
| if (err) { | |
| printk(KERN_ERR "%s: error %d requesting status\n", | |
| req->rq_disk->disk_name, err); | |
| goto cmd_err; | |
| } | |
| /* | |
| * Some cards mishandle the status bits, | |
| * so make sure to check both the busy | |
| * indication and the card state. | |
| */ | |
| } while (!(cmd.resp[0] & R1_READY_FOR_DATA) || | |
| (R1_CURRENT_STATE(cmd.resp[0]) == 7)); | |
| #if 0 | |
| if (cmd.resp[0] & ~0x00000900) | |
| printk(KERN_ERR "%s: status = %08x\n", | |
| req->rq_disk->disk_name, cmd.resp[0]); | |
| if (mmc_decode_status(cmd.resp)) | |
| goto cmd_err; | |
| #endif | |
| } | |
| if (brq.cmd.error || brq.stop.error || brq.data.error) { | |
| if (rq_data_dir(req) == READ) { | |
| /* | |
| * After an error, we redo I/O one sector at a | |
| * time, so we only reach here after trying to | |
| * read a single sector. | |
| */ | |
| spin_lock_irq(&md->lock); | |
| ret = __blk_end_request(req, -EIO, brq.data.blksz); | |
| spin_unlock_irq(&md->lock); | |
| continue; | |
| } | |
| goto cmd_err; | |
| } | |
| /* | |
| * A block was successfully transferred. | |
| */ | |
| spin_lock_irq(&md->lock); | |
| ret = __blk_end_request(req, 0, brq.data.bytes_xfered); | |
| spin_unlock_irq(&md->lock); | |
| } while (ret); | |
| mmc_release_host(card->host); | |
| return 1; | |
| cmd_err: | |
| /* | |
| * If this is an SD card and we're writing, we can first | |
| * mark the known good sectors as ok. | |
| * | |
| * If the card is not SD, we can still ok written sectors | |
| * as reported by the controller (which might be less than | |
| * the real number of written sectors, but never more). | |
| */ | |
| if (mmc_card_sd(card)) { | |
| u32 blocks; | |
| blocks = mmc_sd_num_wr_blocks(card); | |
| if (blocks != (u32)-1) { | |
| spin_lock_irq(&md->lock); | |
| ret = __blk_end_request(req, 0, blocks << 9); | |
| spin_unlock_irq(&md->lock); | |
| } | |
| } else { | |
| spin_lock_irq(&md->lock); | |
| ret = __blk_end_request(req, 0, brq.data.bytes_xfered); | |
| spin_unlock_irq(&md->lock); | |
| } | |
| mmc_release_host(card->host); | |
| spin_lock_irq(&md->lock); | |
| while (ret) | |
| ret = __blk_end_request(req, -EIO, blk_rq_cur_bytes(req)); | |
| spin_unlock_irq(&md->lock); | |
| return 0; | |
| } | |
| static inline int mmc_blk_readonly(struct mmc_card *card) | |
| { | |
| return mmc_card_readonly(card) || | |
| !(card->csd.cmdclass & CCC_BLOCK_WRITE); | |
| } | |
| static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) | |
| { | |
| struct mmc_blk_data *md; | |
| int devidx, ret; | |
| devidx = find_first_zero_bit(dev_use, MMC_NUM_MINORS); | |
| if (devidx >= MMC_NUM_MINORS) | |
| return ERR_PTR(-ENOSPC); | |
| __set_bit(devidx, dev_use); | |
| md = kzalloc(sizeof(struct mmc_blk_data), GFP_KERNEL); | |
| if (!md) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| /* | |
| * Set the read-only status based on the supported commands | |
| * and the write protect switch. | |
| */ | |
| md->read_only = mmc_blk_readonly(card); | |
| md->disk = alloc_disk(1 << MMC_SHIFT); | |
| if (md->disk == NULL) { | |
| ret = -ENOMEM; | |
| goto err_kfree; | |
| } | |
| spin_lock_init(&md->lock); | |
| md->usage = 1; | |
| ret = mmc_init_queue(&md->queue, card, &md->lock); | |
| if (ret) | |
| goto err_putdisk; | |
| md->queue.issue_fn = mmc_blk_issue_rq; | |
| md->queue.data = md; | |
| md->disk->major = MMC_BLOCK_MAJOR; | |
| md->disk->first_minor = devidx << MMC_SHIFT; | |
| md->disk->fops = &mmc_bdops; | |
| md->disk->private_data = md; | |
| md->disk->queue = md->queue.queue; | |
| md->disk->driverfs_dev = &card->dev; | |
| /* | |
| * As discussed on lkml, GENHD_FL_REMOVABLE should: | |
| * | |
| * - be set for removable media with permanent block devices | |
| * - be unset for removable block devices with permanent media | |
| * | |
| * Since MMC block devices clearly fall under the second | |
| * case, we do not set GENHD_FL_REMOVABLE. Userspace | |
| * should use the block device creation/destruction hotplug | |
| * messages to tell when the card is present. | |
| */ | |
| sprintf(md->disk->disk_name, "mmcblk%d", devidx); | |
| blk_queue_hardsect_size(md->queue.queue, 512); | |
| if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { | |
| /* | |
| * The EXT_CSD sector count is in number or 512 byte | |
| * sectors. | |
| */ | |
| set_capacity(md->disk, card->ext_csd.sectors); | |
| } else { | |
| /* | |
| * The CSD capacity field is in units of read_blkbits. | |
| * set_capacity takes units of 512 bytes. | |
| */ | |
| set_capacity(md->disk, | |
| card->csd.capacity << (card->csd.read_blkbits - 9)); | |
| } | |
| return md; | |
| err_putdisk: | |
| put_disk(md->disk); | |
| err_kfree: | |
| kfree(md); | |
| out: | |
| return ERR_PTR(ret); | |
| } | |
| static int | |
| mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card) | |
| { | |
| struct mmc_command cmd; | |
| int err; | |
| /* Block-addressed cards ignore MMC_SET_BLOCKLEN. */ | |
| if (mmc_card_blockaddr(card)) | |
| return 0; | |
| mmc_claim_host(card->host); | |
| cmd.opcode = MMC_SET_BLOCKLEN; | |
| cmd.arg = 512; | |
| cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; | |
| err = mmc_wait_for_cmd(card->host, &cmd, 5); | |
| mmc_release_host(card->host); | |
| if (err) { | |
| printk(KERN_ERR "%s: unable to set block size to %d: %d\n", | |
| md->disk->disk_name, cmd.arg, err); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int mmc_blk_probe(struct mmc_card *card) | |
| { | |
| struct mmc_blk_data *md; | |
| int err; | |
| char cap_str[10]; | |
| /* | |
| * Check that the card supports the command class(es) we need. | |
| */ | |
| if (!(card->csd.cmdclass & CCC_BLOCK_READ)) | |
| return -ENODEV; | |
| md = mmc_blk_alloc(card); | |
| if (IS_ERR(md)) | |
| return PTR_ERR(md); | |
| err = mmc_blk_set_blksize(md, card); | |
| if (err) | |
| goto out; | |
| string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2, | |
| cap_str, sizeof(cap_str)); | |
| printk(KERN_INFO "%s: %s %s %s %s\n", | |
| md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), | |
| cap_str, md->read_only ? "(ro)" : ""); | |
| mmc_set_drvdata(card, md); | |
| add_disk(md->disk); | |
| return 0; | |
| out: | |
| mmc_blk_put(md); | |
| return err; | |
| } | |
| static void mmc_blk_remove(struct mmc_card *card) | |
| { | |
| struct mmc_blk_data *md = mmc_get_drvdata(card); | |
| if (md) { | |
| /* Stop new requests from getting into the queue */ | |
| del_gendisk(md->disk); | |
| /* Then flush out any already in there */ | |
| mmc_cleanup_queue(&md->queue); | |
| mmc_blk_put(md); | |
| } | |
| mmc_set_drvdata(card, NULL); | |
| } | |
| #ifdef CONFIG_PM | |
| static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state) | |
| { | |
| struct mmc_blk_data *md = mmc_get_drvdata(card); | |
| if (md) { | |
| mmc_queue_suspend(&md->queue); | |
| } | |
| return 0; | |
| } | |
| static int mmc_blk_resume(struct mmc_card *card) | |
| { | |
| struct mmc_blk_data *md = mmc_get_drvdata(card); | |
| if (md) { | |
| mmc_blk_set_blksize(md, card); | |
| mmc_queue_resume(&md->queue); | |
| } | |
| return 0; | |
| } | |
| #else | |
| #define mmc_blk_suspend NULL | |
| #define mmc_blk_resume NULL | |
| #endif | |
| static struct mmc_driver mmc_driver = { | |
| .drv = { | |
| .name = "mmcblk", | |
| }, | |
| .probe = mmc_blk_probe, | |
| .remove = mmc_blk_remove, | |
| .suspend = mmc_blk_suspend, | |
| .resume = mmc_blk_resume, | |
| }; | |
| static int __init mmc_blk_init(void) | |
| { | |
| int res; | |
| res = register_blkdev(MMC_BLOCK_MAJOR, "mmc"); | |
| if (res) | |
| goto out; | |
| res = mmc_register_driver(&mmc_driver); | |
| if (res) | |
| goto out2; | |
| return 0; | |
| out2: | |
| unregister_blkdev(MMC_BLOCK_MAJOR, "mmc"); | |
| out: | |
| return res; | |
| } | |
| static void __exit mmc_blk_exit(void) | |
| { | |
| mmc_unregister_driver(&mmc_driver); | |
| unregister_blkdev(MMC_BLOCK_MAJOR, "mmc"); | |
| } | |
| module_init(mmc_blk_init); | |
| module_exit(mmc_blk_exit); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver"); | |