| /* |
| * Fitipower FC0013 tuner driver |
| * |
| * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net> |
| * partially based on driver code from Fitipower |
| * Copyright (C) 2010 Fitipower Integrated Technology Inc |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include "fc0013.h" |
| #include "fc0013-priv.h" |
| |
| static int fc0013_writereg(struct fc0013_priv *priv, u8 reg, u8 val) |
| { |
| u8 buf[2] = {reg, val}; |
| struct i2c_msg msg = { |
| .addr = priv->addr, .flags = 0, .buf = buf, .len = 2 |
| }; |
| |
| if (i2c_transfer(priv->i2c, &msg, 1) != 1) { |
| err("I2C write reg failed, reg: %02x, val: %02x", reg, val); |
| return -EREMOTEIO; |
| } |
| return 0; |
| } |
| |
| static int fc0013_readreg(struct fc0013_priv *priv, u8 reg, u8 *val) |
| { |
| struct i2c_msg msg[2] = { |
| { .addr = priv->addr, .flags = 0, .buf = ®, .len = 1 }, |
| { .addr = priv->addr, .flags = I2C_M_RD, .buf = val, .len = 1 }, |
| }; |
| |
| if (i2c_transfer(priv->i2c, msg, 2) != 2) { |
| err("I2C read reg failed, reg: %02x", reg); |
| return -EREMOTEIO; |
| } |
| return 0; |
| } |
| |
| static void fc0013_release(struct dvb_frontend *fe) |
| { |
| kfree(fe->tuner_priv); |
| fe->tuner_priv = NULL; |
| } |
| |
| static int fc0013_init(struct dvb_frontend *fe) |
| { |
| struct fc0013_priv *priv = fe->tuner_priv; |
| int i, ret = 0; |
| unsigned char reg[] = { |
| 0x00, /* reg. 0x00: dummy */ |
| 0x09, /* reg. 0x01 */ |
| 0x16, /* reg. 0x02 */ |
| 0x00, /* reg. 0x03 */ |
| 0x00, /* reg. 0x04 */ |
| 0x17, /* reg. 0x05 */ |
| 0x02, /* reg. 0x06 */ |
| 0x0a, /* reg. 0x07: CHECK */ |
| 0xff, /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256, |
| Loop Bw 1/8 */ |
| 0x6f, /* reg. 0x09: enable LoopThrough */ |
| 0xb8, /* reg. 0x0a: Disable LO Test Buffer */ |
| 0x82, /* reg. 0x0b: CHECK */ |
| 0xfc, /* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */ |
| 0x01, /* reg. 0x0d: AGC Not Forcing & LNA Forcing, may need 0x02 */ |
| 0x00, /* reg. 0x0e */ |
| 0x00, /* reg. 0x0f */ |
| 0x00, /* reg. 0x10 */ |
| 0x00, /* reg. 0x11 */ |
| 0x00, /* reg. 0x12 */ |
| 0x00, /* reg. 0x13 */ |
| 0x50, /* reg. 0x14: DVB-t High Gain, UHF. |
| Middle Gain: 0x48, Low Gain: 0x40 */ |
| 0x01, /* reg. 0x15 */ |
| }; |
| |
| switch (priv->xtal_freq) { |
| case FC_XTAL_27_MHZ: |
| case FC_XTAL_28_8_MHZ: |
| reg[0x07] |= 0x20; |
| break; |
| case FC_XTAL_36_MHZ: |
| default: |
| break; |
| } |
| |
| if (priv->dual_master) |
| reg[0x0c] |= 0x02; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ |
| |
| for (i = 1; i < sizeof(reg); i++) { |
| ret = fc0013_writereg(priv, i, reg[i]); |
| if (ret) |
| break; |
| } |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ |
| |
| if (ret) |
| err("fc0013_writereg failed: %d", ret); |
| |
| return ret; |
| } |
| |
| static int fc0013_sleep(struct dvb_frontend *fe) |
| { |
| /* nothing to do here */ |
| return 0; |
| } |
| |
| int fc0013_rc_cal_add(struct dvb_frontend *fe, int rc_val) |
| { |
| struct fc0013_priv *priv = fe->tuner_priv; |
| int ret; |
| u8 rc_cal; |
| int val; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ |
| |
| /* push rc_cal value, get rc_cal value */ |
| ret = fc0013_writereg(priv, 0x10, 0x00); |
| if (ret) |
| goto error_out; |
| |
| /* get rc_cal value */ |
| ret = fc0013_readreg(priv, 0x10, &rc_cal); |
| if (ret) |
| goto error_out; |
| |
| rc_cal &= 0x0f; |
| |
| val = (int)rc_cal + rc_val; |
| |
| /* forcing rc_cal */ |
| ret = fc0013_writereg(priv, 0x0d, 0x11); |
| if (ret) |
| goto error_out; |
| |
| /* modify rc_cal value */ |
| if (val > 15) |
| ret = fc0013_writereg(priv, 0x10, 0x0f); |
| else if (val < 0) |
| ret = fc0013_writereg(priv, 0x10, 0x00); |
| else |
| ret = fc0013_writereg(priv, 0x10, (u8)val); |
| |
| error_out: |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(fc0013_rc_cal_add); |
| |
| int fc0013_rc_cal_reset(struct dvb_frontend *fe) |
| { |
| struct fc0013_priv *priv = fe->tuner_priv; |
| int ret; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ |
| |
| ret = fc0013_writereg(priv, 0x0d, 0x01); |
| if (!ret) |
| ret = fc0013_writereg(priv, 0x10, 0x00); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(fc0013_rc_cal_reset); |
| |
| static int fc0013_set_vhf_track(struct fc0013_priv *priv, u32 freq) |
| { |
| int ret; |
| u8 tmp; |
| |
| ret = fc0013_readreg(priv, 0x1d, &tmp); |
| if (ret) |
| goto error_out; |
| tmp &= 0xe3; |
| if (freq <= 177500) { /* VHF Track: 7 */ |
| ret = fc0013_writereg(priv, 0x1d, tmp | 0x1c); |
| } else if (freq <= 184500) { /* VHF Track: 6 */ |
| ret = fc0013_writereg(priv, 0x1d, tmp | 0x18); |
| } else if (freq <= 191500) { /* VHF Track: 5 */ |
| ret = fc0013_writereg(priv, 0x1d, tmp | 0x14); |
| } else if (freq <= 198500) { /* VHF Track: 4 */ |
| ret = fc0013_writereg(priv, 0x1d, tmp | 0x10); |
| } else if (freq <= 205500) { /* VHF Track: 3 */ |
| ret = fc0013_writereg(priv, 0x1d, tmp | 0x0c); |
| } else if (freq <= 219500) { /* VHF Track: 2 */ |
| ret = fc0013_writereg(priv, 0x1d, tmp | 0x08); |
| } else if (freq < 300000) { /* VHF Track: 1 */ |
| ret = fc0013_writereg(priv, 0x1d, tmp | 0x04); |
| } else { /* UHF and GPS */ |
| ret = fc0013_writereg(priv, 0x1d, tmp | 0x1c); |
| } |
| error_out: |
| return ret; |
| } |
| |
| static int fc0013_set_params(struct dvb_frontend *fe) |
| { |
| struct fc0013_priv *priv = fe->tuner_priv; |
| int i, ret = 0; |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| u32 freq = p->frequency / 1000; |
| u32 delsys = p->delivery_system; |
| unsigned char reg[7], am, pm, multi, tmp; |
| unsigned long f_vco; |
| unsigned short xtal_freq_khz_2, xin, xdiv; |
| bool vco_select = false; |
| |
| if (fe->callback) { |
| ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, |
| FC_FE_CALLBACK_VHF_ENABLE, (freq > 300000 ? 0 : 1)); |
| if (ret) |
| goto exit; |
| } |
| |
| switch (priv->xtal_freq) { |
| case FC_XTAL_27_MHZ: |
| xtal_freq_khz_2 = 27000 / 2; |
| break; |
| case FC_XTAL_36_MHZ: |
| xtal_freq_khz_2 = 36000 / 2; |
| break; |
| case FC_XTAL_28_8_MHZ: |
| default: |
| xtal_freq_khz_2 = 28800 / 2; |
| break; |
| } |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ |
| |
| /* set VHF track */ |
| ret = fc0013_set_vhf_track(priv, freq); |
| if (ret) |
| goto exit; |
| |
| if (freq < 300000) { |
| /* enable VHF filter */ |
| ret = fc0013_readreg(priv, 0x07, &tmp); |
| if (ret) |
| goto exit; |
| ret = fc0013_writereg(priv, 0x07, tmp | 0x10); |
| if (ret) |
| goto exit; |
| |
| /* disable UHF & disable GPS */ |
| ret = fc0013_readreg(priv, 0x14, &tmp); |
| if (ret) |
| goto exit; |
| ret = fc0013_writereg(priv, 0x14, tmp & 0x1f); |
| if (ret) |
| goto exit; |
| } else if (freq <= 862000) { |
| /* disable VHF filter */ |
| ret = fc0013_readreg(priv, 0x07, &tmp); |
| if (ret) |
| goto exit; |
| ret = fc0013_writereg(priv, 0x07, tmp & 0xef); |
| if (ret) |
| goto exit; |
| |
| /* enable UHF & disable GPS */ |
| ret = fc0013_readreg(priv, 0x14, &tmp); |
| if (ret) |
| goto exit; |
| ret = fc0013_writereg(priv, 0x14, (tmp & 0x1f) | 0x40); |
| if (ret) |
| goto exit; |
| } else { |
| /* disable VHF filter */ |
| ret = fc0013_readreg(priv, 0x07, &tmp); |
| if (ret) |
| goto exit; |
| ret = fc0013_writereg(priv, 0x07, tmp & 0xef); |
| if (ret) |
| goto exit; |
| |
| /* disable UHF & enable GPS */ |
| ret = fc0013_readreg(priv, 0x14, &tmp); |
| if (ret) |
| goto exit; |
| ret = fc0013_writereg(priv, 0x14, (tmp & 0x1f) | 0x20); |
| if (ret) |
| goto exit; |
| } |
| |
| /* select frequency divider and the frequency of VCO */ |
| if (freq < 37084) { /* freq * 96 < 3560000 */ |
| multi = 96; |
| reg[5] = 0x82; |
| reg[6] = 0x00; |
| } else if (freq < 55625) { /* freq * 64 < 3560000 */ |
| multi = 64; |
| reg[5] = 0x02; |
| reg[6] = 0x02; |
| } else if (freq < 74167) { /* freq * 48 < 3560000 */ |
| multi = 48; |
| reg[5] = 0x42; |
| reg[6] = 0x00; |
| } else if (freq < 111250) { /* freq * 32 < 3560000 */ |
| multi = 32; |
| reg[5] = 0x82; |
| reg[6] = 0x02; |
| } else if (freq < 148334) { /* freq * 24 < 3560000 */ |
| multi = 24; |
| reg[5] = 0x22; |
| reg[6] = 0x00; |
| } else if (freq < 222500) { /* freq * 16 < 3560000 */ |
| multi = 16; |
| reg[5] = 0x42; |
| reg[6] = 0x02; |
| } else if (freq < 296667) { /* freq * 12 < 3560000 */ |
| multi = 12; |
| reg[5] = 0x12; |
| reg[6] = 0x00; |
| } else if (freq < 445000) { /* freq * 8 < 3560000 */ |
| multi = 8; |
| reg[5] = 0x22; |
| reg[6] = 0x02; |
| } else if (freq < 593334) { /* freq * 6 < 3560000 */ |
| multi = 6; |
| reg[5] = 0x0a; |
| reg[6] = 0x00; |
| } else if (freq < 950000) { /* freq * 4 < 3800000 */ |
| multi = 4; |
| reg[5] = 0x12; |
| reg[6] = 0x02; |
| } else { |
| multi = 2; |
| reg[5] = 0x0a; |
| reg[6] = 0x02; |
| } |
| |
| f_vco = freq * multi; |
| |
| if (f_vco >= 3060000) { |
| reg[6] |= 0x08; |
| vco_select = true; |
| } |
| |
| if (freq >= 45000) { |
| /* From divided value (XDIV) determined the FA and FP value */ |
| xdiv = (unsigned short)(f_vco / xtal_freq_khz_2); |
| if ((f_vco - xdiv * xtal_freq_khz_2) >= (xtal_freq_khz_2 / 2)) |
| xdiv++; |
| |
| pm = (unsigned char)(xdiv / 8); |
| am = (unsigned char)(xdiv - (8 * pm)); |
| |
| if (am < 2) { |
| reg[1] = am + 8; |
| reg[2] = pm - 1; |
| } else { |
| reg[1] = am; |
| reg[2] = pm; |
| } |
| } else { |
| /* fix for frequency less than 45 MHz */ |
| reg[1] = 0x06; |
| reg[2] = 0x11; |
| } |
| |
| /* fix clock out */ |
| reg[6] |= 0x20; |
| |
| /* From VCO frequency determines the XIN ( fractional part of Delta |
| Sigma PLL) and divided value (XDIV) */ |
| xin = (unsigned short)(f_vco - (f_vco / xtal_freq_khz_2) * xtal_freq_khz_2); |
| xin = (xin << 15) / xtal_freq_khz_2; |
| if (xin >= 16384) |
| xin += 32768; |
| |
| reg[3] = xin >> 8; |
| reg[4] = xin & 0xff; |
| |
| if (delsys == SYS_DVBT) { |
| reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */ |
| switch (p->bandwidth_hz) { |
| case 6000000: |
| reg[6] |= 0x80; |
| break; |
| case 7000000: |
| reg[6] |= 0x40; |
| break; |
| case 8000000: |
| default: |
| break; |
| } |
| } else { |
| err("%s: modulation type not supported!", __func__); |
| return -EINVAL; |
| } |
| |
| /* modified for Realtek demod */ |
| reg[5] |= 0x07; |
| |
| for (i = 1; i <= 6; i++) { |
| ret = fc0013_writereg(priv, i, reg[i]); |
| if (ret) |
| goto exit; |
| } |
| |
| ret = fc0013_readreg(priv, 0x11, &tmp); |
| if (ret) |
| goto exit; |
| if (multi == 64) |
| ret = fc0013_writereg(priv, 0x11, tmp | 0x04); |
| else |
| ret = fc0013_writereg(priv, 0x11, tmp & 0xfb); |
| if (ret) |
| goto exit; |
| |
| /* VCO Calibration */ |
| ret = fc0013_writereg(priv, 0x0e, 0x80); |
| if (!ret) |
| ret = fc0013_writereg(priv, 0x0e, 0x00); |
| |
| /* VCO Re-Calibration if needed */ |
| if (!ret) |
| ret = fc0013_writereg(priv, 0x0e, 0x00); |
| |
| if (!ret) { |
| msleep(10); |
| ret = fc0013_readreg(priv, 0x0e, &tmp); |
| } |
| if (ret) |
| goto exit; |
| |
| /* vco selection */ |
| tmp &= 0x3f; |
| |
| if (vco_select) { |
| if (tmp > 0x3c) { |
| reg[6] &= ~0x08; |
| ret = fc0013_writereg(priv, 0x06, reg[6]); |
| if (!ret) |
| ret = fc0013_writereg(priv, 0x0e, 0x80); |
| if (!ret) |
| ret = fc0013_writereg(priv, 0x0e, 0x00); |
| } |
| } else { |
| if (tmp < 0x02) { |
| reg[6] |= 0x08; |
| ret = fc0013_writereg(priv, 0x06, reg[6]); |
| if (!ret) |
| ret = fc0013_writereg(priv, 0x0e, 0x80); |
| if (!ret) |
| ret = fc0013_writereg(priv, 0x0e, 0x00); |
| } |
| } |
| |
| priv->frequency = p->frequency; |
| priv->bandwidth = p->bandwidth_hz; |
| |
| exit: |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ |
| if (ret) |
| warn("%s: failed: %d", __func__, ret); |
| return ret; |
| } |
| |
| static int fc0013_get_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct fc0013_priv *priv = fe->tuner_priv; |
| *frequency = priv->frequency; |
| return 0; |
| } |
| |
| static int fc0013_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| /* always ? */ |
| *frequency = 0; |
| return 0; |
| } |
| |
| static int fc0013_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) |
| { |
| struct fc0013_priv *priv = fe->tuner_priv; |
| *bandwidth = priv->bandwidth; |
| return 0; |
| } |
| |
| #define INPUT_ADC_LEVEL -8 |
| |
| static int fc0013_get_rf_strength(struct dvb_frontend *fe, u16 *strength) |
| { |
| struct fc0013_priv *priv = fe->tuner_priv; |
| int ret; |
| unsigned char tmp; |
| int int_temp, lna_gain, int_lna, tot_agc_gain, power; |
| static const int fc0013_lna_gain_table[] = { |
| /* low gain */ |
| -63, -58, -99, -73, |
| -63, -65, -54, -60, |
| /* middle gain */ |
| 71, 70, 68, 67, |
| 65, 63, 61, 58, |
| /* high gain */ |
| 197, 191, 188, 186, |
| 184, 182, 181, 179, |
| }; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ |
| |
| ret = fc0013_writereg(priv, 0x13, 0x00); |
| if (ret) |
| goto err; |
| |
| ret = fc0013_readreg(priv, 0x13, &tmp); |
| if (ret) |
| goto err; |
| int_temp = tmp; |
| |
| ret = fc0013_readreg(priv, 0x14, &tmp); |
| if (ret) |
| goto err; |
| lna_gain = tmp & 0x1f; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ |
| |
| if (lna_gain < ARRAY_SIZE(fc0013_lna_gain_table)) { |
| int_lna = fc0013_lna_gain_table[lna_gain]; |
| tot_agc_gain = (abs((int_temp >> 5) - 7) - 2 + |
| (int_temp & 0x1f)) * 2; |
| power = INPUT_ADC_LEVEL - tot_agc_gain - int_lna / 10; |
| |
| if (power >= 45) |
| *strength = 255; /* 100% */ |
| else if (power < -95) |
| *strength = 0; |
| else |
| *strength = (power + 95) * 255 / 140; |
| |
| *strength |= *strength << 8; |
| } else { |
| ret = -1; |
| } |
| |
| goto exit; |
| |
| err: |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ |
| exit: |
| if (ret) |
| warn("%s: failed: %d", __func__, ret); |
| return ret; |
| } |
| |
| static const struct dvb_tuner_ops fc0013_tuner_ops = { |
| .info = { |
| .name = "Fitipower FC0013", |
| |
| .frequency_min_hz = 37 * MHz, /* estimate */ |
| .frequency_max_hz = 1680 * MHz, /* CHECK */ |
| }, |
| |
| .release = fc0013_release, |
| |
| .init = fc0013_init, |
| .sleep = fc0013_sleep, |
| |
| .set_params = fc0013_set_params, |
| |
| .get_frequency = fc0013_get_frequency, |
| .get_if_frequency = fc0013_get_if_frequency, |
| .get_bandwidth = fc0013_get_bandwidth, |
| |
| .get_rf_strength = fc0013_get_rf_strength, |
| }; |
| |
| struct dvb_frontend *fc0013_attach(struct dvb_frontend *fe, |
| struct i2c_adapter *i2c, u8 i2c_address, int dual_master, |
| enum fc001x_xtal_freq xtal_freq) |
| { |
| struct fc0013_priv *priv = NULL; |
| |
| priv = kzalloc(sizeof(struct fc0013_priv), GFP_KERNEL); |
| if (priv == NULL) |
| return NULL; |
| |
| priv->i2c = i2c; |
| priv->dual_master = dual_master; |
| priv->addr = i2c_address; |
| priv->xtal_freq = xtal_freq; |
| |
| info("Fitipower FC0013 successfully attached."); |
| |
| fe->tuner_priv = priv; |
| |
| memcpy(&fe->ops.tuner_ops, &fc0013_tuner_ops, |
| sizeof(struct dvb_tuner_ops)); |
| |
| return fe; |
| } |
| EXPORT_SYMBOL(fc0013_attach); |
| |
| MODULE_DESCRIPTION("Fitipower FC0013 silicon tuner driver"); |
| MODULE_AUTHOR("Hans-Frieder Vogt <hfvogt@gmx.net>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION("0.2"); |