regulators: max8973: fix multiple instance support

Currently the max8973 regulator driver uses a single static struct of
regulator operations for all chip instances, but can overwrite some of its
members depending on configuration. This will affect all other MAX8973
instances on the system. This patch fixes this bug by allocating a separate
copy of the struct for each chip instance.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

drivers/regulator/max8973-regulator.c

diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index adb1414..b2dbdd7 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -100,6 +100,7 @@
 	int curr_vout_reg;
 	int curr_gpio_val;
 	bool valid_dvs_gpio;
+	struct regulator_ops ops;
 };
 
 /*
@@ -240,7 +241,7 @@
 		REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
 }
 
-static struct regulator_ops max8973_dcdc_ops = {
+static const struct regulator_ops max8973_dcdc_ops = {
 	.get_voltage_sel	= max8973_dcdc_get_voltage_sel,
 	.set_voltage_sel	= max8973_dcdc_set_voltage_sel,
 	.list_voltage		= regulator_list_voltage_linear,
@@ -388,10 +389,11 @@
 	}
 
 	i2c_set_clientdata(client, max);
+	max->ops = max8973_dcdc_ops;
 	max->dev = &client->dev;
 	max->desc.name = id->name;
 	max->desc.id = 0;
-	max->desc.ops = &max8973_dcdc_ops;
+	max->desc.ops = &max->ops;
 	max->desc.type = REGULATOR_VOLTAGE;
 	max->desc.owner = THIS_MODULE;
 	max->desc.min_uV = MAX8973_MIN_VOLATGE;
@@ -401,9 +403,9 @@
 	if (!pdata->enable_ext_control) {
 		max->desc.enable_reg = MAX8973_VOUT;
 		max->desc.enable_mask = MAX8973_VOUT_ENABLE;
-		max8973_dcdc_ops.enable = regulator_enable_regmap;
-		max8973_dcdc_ops.disable = regulator_disable_regmap;
-		max8973_dcdc_ops.is_enabled = regulator_is_enabled_regmap;
+		max->ops.enable = regulator_enable_regmap;
+		max->ops.disable = regulator_disable_regmap;
+		max->ops.is_enabled = regulator_is_enabled_regmap;
 	}
 
 	max->enable_external_control = pdata->enable_ext_control;