|  | Changes since 2.5.0: | 
|  |  | 
|  | --- | 
|  | [recommended] | 
|  |  | 
|  | New helpers: sb_bread(), sb_getblk(), sb_find_get_block(), set_bh(), | 
|  | sb_set_blocksize() and sb_min_blocksize(). | 
|  |  | 
|  | Use them. | 
|  |  | 
|  | (sb_find_get_block() replaces 2.4's get_hash_table()) | 
|  |  | 
|  | --- | 
|  | [recommended] | 
|  |  | 
|  | New methods: ->alloc_inode() and ->destroy_inode(). | 
|  |  | 
|  | Remove inode->u.foo_inode_i | 
|  | Declare | 
|  | struct foo_inode_info { | 
|  | /* fs-private stuff */ | 
|  | struct inode vfs_inode; | 
|  | }; | 
|  | static inline struct foo_inode_info *FOO_I(struct inode *inode) | 
|  | { | 
|  | return list_entry(inode, struct foo_inode_info, vfs_inode); | 
|  | } | 
|  |  | 
|  | Use FOO_I(inode) instead of &inode->u.foo_inode_i; | 
|  |  | 
|  | Add foo_alloc_inode() and foo_destroy_inode() - the former should allocate | 
|  | foo_inode_info and return the address of ->vfs_inode, the latter should free | 
|  | FOO_I(inode) (see in-tree filesystems for examples). | 
|  |  | 
|  | Make them ->alloc_inode and ->destroy_inode in your super_operations. | 
|  |  | 
|  | Keep in mind that now you need explicit initialization of private data | 
|  | typically between calling iget_locked() and unlocking the inode. | 
|  |  | 
|  | At some point that will become mandatory. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | Change of file_system_type method (->read_super to ->get_sb) | 
|  |  | 
|  | ->read_super() is no more.  Ditto for DECLARE_FSTYPE and DECLARE_FSTYPE_DEV. | 
|  |  | 
|  | Turn your foo_read_super() into a function that would return 0 in case of | 
|  | success and negative number in case of error (-EINVAL unless you have more | 
|  | informative error value to report).  Call it foo_fill_super().  Now declare | 
|  |  | 
|  | int foo_get_sb(struct file_system_type *fs_type, | 
|  | int flags, const char *dev_name, void *data, struct vfsmount *mnt) | 
|  | { | 
|  | return get_sb_bdev(fs_type, flags, dev_name, data, foo_fill_super, | 
|  | mnt); | 
|  | } | 
|  |  | 
|  | (or similar with s/bdev/nodev/ or s/bdev/single/, depending on the kind of | 
|  | filesystem). | 
|  |  | 
|  | Replace DECLARE_FSTYPE... with explicit initializer and have ->get_sb set as | 
|  | foo_get_sb. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | Locking change: ->s_vfs_rename_sem is taken only by cross-directory renames. | 
|  | Most likely there is no need to change anything, but if you relied on | 
|  | global exclusion between renames for some internal purpose - you need to | 
|  | change your internal locking.  Otherwise exclusion warranties remain the | 
|  | same (i.e. parents and victim are locked, etc.). | 
|  |  | 
|  | --- | 
|  | [informational] | 
|  |  | 
|  | Now we have the exclusion between ->lookup() and directory removal (by | 
|  | ->rmdir() and ->rename()).  If you used to need that exclusion and do | 
|  | it by internal locking (most of filesystems couldn't care less) - you | 
|  | can relax your locking. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | ->lookup(), ->truncate(), ->create(), ->unlink(), ->mknod(), ->mkdir(), | 
|  | ->rmdir(), ->link(), ->lseek(), ->symlink(), ->rename() | 
|  | and ->readdir() are called without BKL now.  Grab it on entry, drop upon return | 
|  | - that will guarantee the same locking you used to have.  If your method or its | 
|  | parts do not need BKL - better yet, now you can shift lock_kernel() and | 
|  | unlock_kernel() so that they would protect exactly what needs to be | 
|  | protected. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | BKL is also moved from around sb operations. BKL should have been shifted into | 
|  | individual fs sb_op functions.  If you don't need it, remove it. | 
|  |  | 
|  | --- | 
|  | [informational] | 
|  |  | 
|  | check for ->link() target not being a directory is done by callers.  Feel | 
|  | free to drop it... | 
|  |  | 
|  | --- | 
|  | [informational] | 
|  |  | 
|  | ->link() callers hold ->i_mutex on the object we are linking to.  Some of your | 
|  | problems might be over... | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | new file_system_type method - kill_sb(superblock).  If you are converting | 
|  | an existing filesystem, set it according to ->fs_flags: | 
|  | FS_REQUIRES_DEV		-	kill_block_super | 
|  | FS_LITTER		-	kill_litter_super | 
|  | neither			-	kill_anon_super | 
|  | FS_LITTER is gone - just remove it from fs_flags. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | FS_SINGLE is gone (actually, that had happened back when ->get_sb() | 
|  | went in - and hadn't been documented ;-/).  Just remove it from fs_flags | 
|  | (and see ->get_sb() entry for other actions). | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | ->setattr() is called without BKL now.  Caller _always_ holds ->i_mutex, so | 
|  | watch for ->i_mutex-grabbing code that might be used by your ->setattr(). | 
|  | Callers of notify_change() need ->i_mutex now. | 
|  |  | 
|  | --- | 
|  | [recommended] | 
|  |  | 
|  | New super_block field "struct export_operations *s_export_op" for | 
|  | explicit support for exporting, e.g. via NFS.  The structure is fully | 
|  | documented at its declaration in include/linux/fs.h, and in | 
|  | Documentation/filesystems/nfs/Exporting. | 
|  |  | 
|  | Briefly it allows for the definition of decode_fh and encode_fh operations | 
|  | to encode and decode filehandles, and allows the filesystem to use | 
|  | a standard helper function for decode_fh, and provide file-system specific | 
|  | support for this helper, particularly get_parent. | 
|  |  | 
|  | It is planned that this will be required for exporting once the code | 
|  | settles down a bit. | 
|  |  | 
|  | [mandatory] | 
|  |  | 
|  | s_export_op is now required for exporting a filesystem. | 
|  | isofs, ext2, ext3, resierfs, fat | 
|  | can be used as examples of very different filesystems. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | iget4() and the read_inode2 callback have been superseded by iget5_locked() | 
|  | which has the following prototype, | 
|  |  | 
|  | struct inode *iget5_locked(struct super_block *sb, unsigned long ino, | 
|  | int (*test)(struct inode *, void *), | 
|  | int (*set)(struct inode *, void *), | 
|  | void *data); | 
|  |  | 
|  | 'test' is an additional function that can be used when the inode | 
|  | number is not sufficient to identify the actual file object. 'set' | 
|  | should be a non-blocking function that initializes those parts of a | 
|  | newly created inode to allow the test function to succeed. 'data' is | 
|  | passed as an opaque value to both test and set functions. | 
|  |  | 
|  | When the inode has been created by iget5_locked(), it will be returned with the | 
|  | I_NEW flag set and will still be locked.  The filesystem then needs to finalize | 
|  | the initialization. Once the inode is initialized it must be unlocked by | 
|  | calling unlock_new_inode(). | 
|  |  | 
|  | The filesystem is responsible for setting (and possibly testing) i_ino | 
|  | when appropriate. There is also a simpler iget_locked function that | 
|  | just takes the superblock and inode number as arguments and does the | 
|  | test and set for you. | 
|  |  | 
|  | e.g. | 
|  | inode = iget_locked(sb, ino); | 
|  | if (inode->i_state & I_NEW) { | 
|  | err = read_inode_from_disk(inode); | 
|  | if (err < 0) { | 
|  | iget_failed(inode); | 
|  | return err; | 
|  | } | 
|  | unlock_new_inode(inode); | 
|  | } | 
|  |  | 
|  | Note that if the process of setting up a new inode fails, then iget_failed() | 
|  | should be called on the inode to render it dead, and an appropriate error | 
|  | should be passed back to the caller. | 
|  |  | 
|  | --- | 
|  | [recommended] | 
|  |  | 
|  | ->getattr() finally getting used.  See instances in nfs, minix, etc. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | ->revalidate() is gone.  If your filesystem had it - provide ->getattr() | 
|  | and let it call whatever you had as ->revlidate() + (for symlinks that | 
|  | had ->revalidate()) add calls in ->follow_link()/->readlink(). | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | ->d_parent changes are not protected by BKL anymore.  Read access is safe | 
|  | if at least one of the following is true: | 
|  | * filesystem has no cross-directory rename() | 
|  | * we know that parent had been locked (e.g. we are looking at | 
|  | ->d_parent of ->lookup() argument). | 
|  | * we are called from ->rename(). | 
|  | * the child's ->d_lock is held | 
|  | Audit your code and add locking if needed.  Notice that any place that is | 
|  | not protected by the conditions above is risky even in the old tree - you | 
|  | had been relying on BKL and that's prone to screwups.  Old tree had quite | 
|  | a few holes of that kind - unprotected access to ->d_parent leading to | 
|  | anything from oops to silent memory corruption. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | FS_NOMOUNT is gone.  If you use it - just set SB_NOUSER in flags | 
|  | (see rootfs for one kind of solution and bdev/socket/pipe for another). | 
|  |  | 
|  | --- | 
|  | [recommended] | 
|  |  | 
|  | Use bdev_read_only(bdev) instead of is_read_only(kdev).  The latter | 
|  | is still alive, but only because of the mess in drivers/s390/block/dasd.c. | 
|  | As soon as it gets fixed is_read_only() will die. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | ->permission() is called without BKL now. Grab it on entry, drop upon | 
|  | return - that will guarantee the same locking you used to have.  If | 
|  | your method or its parts do not need BKL - better yet, now you can | 
|  | shift lock_kernel() and unlock_kernel() so that they would protect | 
|  | exactly what needs to be protected. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | ->statfs() is now called without BKL held.  BKL should have been | 
|  | shifted into individual fs sb_op functions where it's not clear that | 
|  | it's safe to remove it.  If you don't need it, remove it. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | is_read_only() is gone; use bdev_read_only() instead. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | destroy_buffers() is gone; use invalidate_bdev(). | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | fsync_dev() is gone; use fsync_bdev().  NOTE: lvm breakage is | 
|  | deliberate; as soon as struct block_device * is propagated in a reasonable | 
|  | way by that code fixing will become trivial; until then nothing can be | 
|  | done. | 
|  |  | 
|  | [mandatory] | 
|  |  | 
|  | block truncatation on error exit from ->write_begin, and ->direct_IO | 
|  | moved from generic methods (block_write_begin, cont_write_begin, | 
|  | nobh_write_begin, blockdev_direct_IO*) to callers.  Take a look at | 
|  | ext2_write_failed and callers for an example. | 
|  |  | 
|  | [mandatory] | 
|  |  | 
|  | ->truncate is gone.  The whole truncate sequence needs to be | 
|  | implemented in ->setattr, which is now mandatory for filesystems | 
|  | implementing on-disk size changes.  Start with a copy of the old inode_setattr | 
|  | and vmtruncate, and the reorder the vmtruncate + foofs_vmtruncate sequence to | 
|  | be in order of zeroing blocks using block_truncate_page or similar helpers, | 
|  | size update and on finally on-disk truncation which should not fail. | 
|  | setattr_prepare (which used to be inode_change_ok) now includes the size checks | 
|  | for ATTR_SIZE and must be called in the beginning of ->setattr unconditionally. | 
|  |  | 
|  | [mandatory] | 
|  |  | 
|  | ->clear_inode() and ->delete_inode() are gone; ->evict_inode() should | 
|  | be used instead.  It gets called whenever the inode is evicted, whether it has | 
|  | remaining links or not.  Caller does *not* evict the pagecache or inode-associated | 
|  | metadata buffers; the method has to use truncate_inode_pages_final() to get rid | 
|  | of those. Caller makes sure async writeback cannot be running for the inode while | 
|  | (or after) ->evict_inode() is called. | 
|  |  | 
|  | ->drop_inode() returns int now; it's called on final iput() with | 
|  | inode->i_lock held and it returns true if filesystems wants the inode to be | 
|  | dropped.  As before, generic_drop_inode() is still the default and it's been | 
|  | updated appropriately.  generic_delete_inode() is also alive and it consists | 
|  | simply of return 1.  Note that all actual eviction work is done by caller after | 
|  | ->drop_inode() returns. | 
|  |  | 
|  | As before, clear_inode() must be called exactly once on each call of | 
|  | ->evict_inode() (as it used to be for each call of ->delete_inode()).  Unlike | 
|  | before, if you are using inode-associated metadata buffers (i.e. | 
|  | mark_buffer_dirty_inode()), it's your responsibility to call | 
|  | invalidate_inode_buffers() before clear_inode(). | 
|  |  | 
|  | NOTE: checking i_nlink in the beginning of ->write_inode() and bailing out | 
|  | if it's zero is not *and* *never* *had* *been* enough.  Final unlink() and iput() | 
|  | may happen while the inode is in the middle of ->write_inode(); e.g. if you blindly | 
|  | free the on-disk inode, you may end up doing that while ->write_inode() is writing | 
|  | to it. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | .d_delete() now only advises the dcache as to whether or not to cache | 
|  | unreferenced dentries, and is now only called when the dentry refcount goes to | 
|  | 0. Even on 0 refcount transition, it must be able to tolerate being called 0, | 
|  | 1, or more times (eg. constant, idempotent). | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | .d_compare() calling convention and locking rules are significantly | 
|  | changed. Read updated documentation in Documentation/filesystems/vfs.txt (and | 
|  | look at examples of other filesystems) for guidance. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  |  | 
|  | .d_hash() calling convention and locking rules are significantly | 
|  | changed. Read updated documentation in Documentation/filesystems/vfs.txt (and | 
|  | look at examples of other filesystems) for guidance. | 
|  |  | 
|  | --- | 
|  | [mandatory] | 
|  | dcache_lock is gone, replaced by fine grained locks. See fs/dcache.c | 
|  | for details of what locks to replace dcache_lock with in order to protect | 
|  | particular things. Most of the time, a filesystem only needs ->d_lock, which | 
|  | protects *all* the dcache state of a given dentry. | 
|  |  | 
|  | -- | 
|  | [mandatory] | 
|  |  | 
|  | Filesystems must RCU-free their inodes, if they can have been accessed | 
|  | via rcu-walk path walk (basically, if the file can have had a path name in the | 
|  | vfs namespace). | 
|  |  | 
|  | Even though i_dentry and i_rcu share storage in a union, we will | 
|  | initialize the former in inode_init_always(), so just leave it alone in | 
|  | the callback.  It used to be necessary to clean it there, but not anymore | 
|  | (starting at 3.2). | 
|  |  | 
|  | -- | 
|  | [recommended] | 
|  | vfs now tries to do path walking in "rcu-walk mode", which avoids | 
|  | atomic operations and scalability hazards on dentries and inodes (see | 
|  | Documentation/filesystems/path-lookup.txt). d_hash and d_compare changes | 
|  | (above) are examples of the changes required to support this. For more complex | 
|  | filesystem callbacks, the vfs drops out of rcu-walk mode before the fs call, so | 
|  | no changes are required to the filesystem. However, this is costly and loses | 
|  | the benefits of rcu-walk mode. We will begin to add filesystem callbacks that | 
|  | are rcu-walk aware, shown below. Filesystems should take advantage of this | 
|  | where possible. | 
|  |  | 
|  | -- | 
|  | [mandatory] | 
|  | d_revalidate is a callback that is made on every path element (if | 
|  | the filesystem provides it), which requires dropping out of rcu-walk mode. This | 
|  | may now be called in rcu-walk mode (nd->flags & LOOKUP_RCU). -ECHILD should be | 
|  | returned if the filesystem cannot handle rcu-walk. See | 
|  | Documentation/filesystems/vfs.txt for more details. | 
|  |  | 
|  | permission is an inode permission check that is called on many or all | 
|  | directory inodes on the way down a path walk (to check for exec permission). It | 
|  | must now be rcu-walk aware (mask & MAY_NOT_BLOCK).  See | 
|  | Documentation/filesystems/vfs.txt for more details. | 
|  |  | 
|  | -- | 
|  | [mandatory] | 
|  | In ->fallocate() you must check the mode option passed in.  If your | 
|  | filesystem does not support hole punching (deallocating space in the middle of a | 
|  | file) you must return -EOPNOTSUPP if FALLOC_FL_PUNCH_HOLE is set in mode. | 
|  | Currently you can only have FALLOC_FL_PUNCH_HOLE with FALLOC_FL_KEEP_SIZE set, | 
|  | so the i_size should not change when hole punching, even when puching the end of | 
|  | a file off. | 
|  |  | 
|  | -- | 
|  | [mandatory] | 
|  | ->get_sb() is gone.  Switch to use of ->mount().  Typically it's just | 
|  | a matter of switching from calling get_sb_... to mount_... and changing the | 
|  | function type.  If you were doing it manually, just switch from setting ->mnt_root | 
|  | to some pointer to returning that pointer.  On errors return ERR_PTR(...). | 
|  |  | 
|  | -- | 
|  | [mandatory] | 
|  | ->permission() and generic_permission()have lost flags | 
|  | argument; instead of passing IPERM_FLAG_RCU we add MAY_NOT_BLOCK into mask. | 
|  | generic_permission() has also lost the check_acl argument; ACL checking | 
|  | has been taken to VFS and filesystems need to provide a non-NULL ->i_op->get_acl | 
|  | to read an ACL from disk. | 
|  |  | 
|  | -- | 
|  | [mandatory] | 
|  | If you implement your own ->llseek() you must handle SEEK_HOLE and | 
|  | SEEK_DATA.  You can hanle this by returning -EINVAL, but it would be nicer to | 
|  | support it in some way.  The generic handler assumes that the entire file is | 
|  | data and there is a virtual hole at the end of the file.  So if the provided | 
|  | offset is less than i_size and SEEK_DATA is specified, return the same offset. | 
|  | If the above is true for the offset and you are given SEEK_HOLE, return the end | 
|  | of the file.  If the offset is i_size or greater return -ENXIO in either case. | 
|  |  | 
|  | [mandatory] | 
|  | If you have your own ->fsync() you must make sure to call | 
|  | filemap_write_and_wait_range() so that all dirty pages are synced out properly. | 
|  | You must also keep in mind that ->fsync() is not called with i_mutex held | 
|  | anymore, so if you require i_mutex locking you must make sure to take it and | 
|  | release it yourself. | 
|  |  | 
|  | -- | 
|  | [mandatory] | 
|  | d_alloc_root() is gone, along with a lot of bugs caused by code | 
|  | misusing it.  Replacement: d_make_root(inode).  The difference is, | 
|  | d_make_root() drops the reference to inode if dentry allocation fails. | 
|  |  | 
|  | -- | 
|  | [mandatory] | 
|  | The witch is dead!  Well, 2/3 of it, anyway.  ->d_revalidate() and | 
|  | ->lookup() do *not* take struct nameidata anymore; just the flags. | 
|  | -- | 
|  | [mandatory] | 
|  | ->create() doesn't take struct nameidata *; unlike the previous | 
|  | two, it gets "is it an O_EXCL or equivalent?" boolean argument.  Note that | 
|  | local filesystems can ignore tha argument - they are guaranteed that the | 
|  | object doesn't exist.  It's remote/distributed ones that might care... | 
|  | -- | 
|  | [mandatory] | 
|  | FS_REVAL_DOT is gone; if you used to have it, add ->d_weak_revalidate() | 
|  | in your dentry operations instead. | 
|  | -- | 
|  | [mandatory] | 
|  | vfs_readdir() is gone; switch to iterate_dir() instead | 
|  | -- | 
|  | [mandatory] | 
|  | ->readdir() is gone now; switch to ->iterate() | 
|  | [mandatory] | 
|  | vfs_follow_link has been removed.  Filesystems must use nd_set_link | 
|  | from ->follow_link for normal symlinks, or nd_jump_link for magic | 
|  | /proc/<pid> style links. | 
|  | -- | 
|  | [mandatory] | 
|  | iget5_locked()/ilookup5()/ilookup5_nowait() test() callback used to be | 
|  | called with both ->i_lock and inode_hash_lock held; the former is *not* | 
|  | taken anymore, so verify that your callbacks do not rely on it (none | 
|  | of the in-tree instances did).  inode_hash_lock is still held, | 
|  | of course, so they are still serialized wrt removal from inode hash, | 
|  | as well as wrt set() callback of iget5_locked(). | 
|  | -- | 
|  | [mandatory] | 
|  | d_materialise_unique() is gone; d_splice_alias() does everything you | 
|  | need now.  Remember that they have opposite orders of arguments ;-/ | 
|  | -- | 
|  | [mandatory] | 
|  | f_dentry is gone; use f_path.dentry, or, better yet, see if you can avoid | 
|  | it entirely. | 
|  | -- | 
|  | [mandatory] | 
|  | never call ->read() and ->write() directly; use __vfs_{read,write} or | 
|  | wrappers; instead of checking for ->write or ->read being NULL, look for | 
|  | FMODE_CAN_{WRITE,READ} in file->f_mode. | 
|  | -- | 
|  | [mandatory] | 
|  | do _not_ use new_sync_{read,write} for ->read/->write; leave it NULL | 
|  | instead. | 
|  | -- | 
|  | [mandatory] | 
|  | ->aio_read/->aio_write are gone.  Use ->read_iter/->write_iter. | 
|  | --- | 
|  | [recommended] | 
|  | for embedded ("fast") symlinks just set inode->i_link to wherever the | 
|  | symlink body is and use simple_follow_link() as ->follow_link(). | 
|  | -- | 
|  | [mandatory] | 
|  | calling conventions for ->follow_link() have changed.  Instead of returning | 
|  | cookie and using nd_set_link() to store the body to traverse, we return | 
|  | the body to traverse and store the cookie using explicit void ** argument. | 
|  | nameidata isn't passed at all - nd_jump_link() doesn't need it and | 
|  | nd_[gs]et_link() is gone. | 
|  | -- | 
|  | [mandatory] | 
|  | calling conventions for ->put_link() have changed.  It gets inode instead of | 
|  | dentry,  it does not get nameidata at all and it gets called only when cookie | 
|  | is non-NULL.  Note that link body isn't available anymore, so if you need it, | 
|  | store it as cookie. | 
|  | -- | 
|  | [mandatory] | 
|  | any symlink that might use page_follow_link_light/page_put_link() must | 
|  | have inode_nohighmem(inode) called before anything might start playing with | 
|  | its pagecache.  No highmem pages should end up in the pagecache of such | 
|  | symlinks.  That includes any preseeding that might be done during symlink | 
|  | creation.  __page_symlink() will honour the mapping gfp flags, so once | 
|  | you've done inode_nohighmem() it's safe to use, but if you allocate and | 
|  | insert the page manually, make sure to use the right gfp flags. | 
|  | -- | 
|  | [mandatory] | 
|  | ->follow_link() is replaced with ->get_link(); same API, except that | 
|  | * ->get_link() gets inode as a separate argument | 
|  | * ->get_link() may be called in RCU mode - in that case NULL | 
|  | dentry is passed | 
|  | -- | 
|  | [mandatory] | 
|  | ->get_link() gets struct delayed_call *done now, and should do | 
|  | set_delayed_call() where it used to set *cookie. | 
|  | ->put_link() is gone - just give the destructor to set_delayed_call() | 
|  | in ->get_link(). | 
|  | -- | 
|  | [mandatory] | 
|  | ->getxattr() and xattr_handler.get() get dentry and inode passed separately. | 
|  | dentry might be yet to be attached to inode, so do _not_ use its ->d_inode | 
|  | in the instances.  Rationale: !@#!@# security_d_instantiate() needs to be | 
|  | called before we attach dentry to inode. | 
|  | -- | 
|  | [mandatory] | 
|  | symlinks are no longer the only inodes that do *not* have i_bdev/i_cdev/ | 
|  | i_pipe/i_link union zeroed out at inode eviction.  As the result, you can't | 
|  | assume that non-NULL value in ->i_nlink at ->destroy_inode() implies that | 
|  | it's a symlink.  Checking ->i_mode is really needed now.  In-tree we had | 
|  | to fix shmem_destroy_callback() that used to take that kind of shortcut; | 
|  | watch out, since that shortcut is no longer valid. | 
|  | -- | 
|  | [mandatory] | 
|  | ->i_mutex is replaced with ->i_rwsem now.  inode_lock() et.al. work as | 
|  | they used to - they just take it exclusive.  However, ->lookup() may be | 
|  | called with parent locked shared.  Its instances must not | 
|  | * use d_instantiate) and d_rehash() separately - use d_add() or | 
|  | d_splice_alias() instead. | 
|  | * use d_rehash() alone - call d_add(new_dentry, NULL) instead. | 
|  | * in the unlikely case when (read-only) access to filesystem | 
|  | data structures needs exclusion for some reason, arrange it | 
|  | yourself.  None of the in-tree filesystems needed that. | 
|  | * rely on ->d_parent and ->d_name not changing after dentry has | 
|  | been fed to d_add() or d_splice_alias().  Again, none of the | 
|  | in-tree instances relied upon that. | 
|  | We are guaranteed that lookups of the same name in the same directory | 
|  | will not happen in parallel ("same" in the sense of your ->d_compare()). | 
|  | Lookups on different names in the same directory can and do happen in | 
|  | parallel now. | 
|  | -- | 
|  | [recommended] | 
|  | ->iterate_shared() is added; it's a parallel variant of ->iterate(). | 
|  | Exclusion on struct file level is still provided (as well as that | 
|  | between it and lseek on the same struct file), but if your directory | 
|  | has been opened several times, you can get these called in parallel. | 
|  | Exclusion between that method and all directory-modifying ones is | 
|  | still provided, of course. | 
|  |  | 
|  | Often enough ->iterate() can serve as ->iterate_shared() without any | 
|  | changes - it is a read-only operation, after all.  If you have any | 
|  | per-inode or per-dentry in-core data structures modified by ->iterate(), | 
|  | you might need something to serialize the access to them.  If you | 
|  | do dcache pre-seeding, you'll need to switch to d_alloc_parallel() for | 
|  | that; look for in-tree examples. | 
|  |  | 
|  | Old method is only used if the new one is absent; eventually it will | 
|  | be removed.  Switch while you still can; the old one won't stay. | 
|  | -- | 
|  | [mandatory] | 
|  | ->atomic_open() calls without O_CREAT may happen in parallel. | 
|  | -- | 
|  | [mandatory] | 
|  | ->setxattr() and xattr_handler.set() get dentry and inode passed separately. | 
|  | dentry might be yet to be attached to inode, so do _not_ use its ->d_inode | 
|  | in the instances.  Rationale: !@#!@# security_d_instantiate() needs to be | 
|  | called before we attach dentry to inode and !@#!@##!@$!$#!@#$!@$!@$ smack | 
|  | ->d_instantiate() uses not just ->getxattr() but ->setxattr() as well. | 
|  | -- | 
|  | [mandatory] | 
|  | ->d_compare() doesn't get parent as a separate argument anymore.  If you | 
|  | used it for finding the struct super_block involved, dentry->d_sb will | 
|  | work just as well; if it's something more complicated, use dentry->d_parent. | 
|  | Just be careful not to assume that fetching it more than once will yield | 
|  | the same value - in RCU mode it could change under you. | 
|  | -- | 
|  | [mandatory] | 
|  | ->rename() has an added flags argument.  Any flags not handled by the | 
|  | filesystem should result in EINVAL being returned. | 
|  | -- | 
|  | [recommended] | 
|  | ->readlink is optional for symlinks.  Don't set, unless filesystem needs | 
|  | to fake something for readlink(2). | 
|  | -- | 
|  | [mandatory] | 
|  | ->getattr() is now passed a struct path rather than a vfsmount and | 
|  | dentry separately, and it now has request_mask and query_flags arguments | 
|  | to specify the fields and sync type requested by statx.  Filesystems not | 
|  | supporting any statx-specific features may ignore the new arguments. |