| /* |
| * Copyright (C) 2015 Microchip Technology |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mii.h> |
| #include <linux/ethtool.h> |
| #include <linux/phy.h> |
| #include <linux/microchipphy.h> |
| #include <linux/delay.h> |
| #include <linux/of.h> |
| #include <dt-bindings/net/microchip-lan78xx.h> |
| |
| #define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>" |
| #define DRIVER_DESC "Microchip LAN88XX PHY driver" |
| |
| struct lan88xx_priv { |
| int chip_id; |
| int chip_rev; |
| __u32 wolopts; |
| }; |
| |
| static int lan88xx_read_page(struct phy_device *phydev) |
| { |
| return __phy_read(phydev, LAN88XX_EXT_PAGE_ACCESS); |
| } |
| |
| static int lan88xx_write_page(struct phy_device *phydev, int page) |
| { |
| return __phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, page); |
| } |
| |
| static int lan88xx_phy_config_intr(struct phy_device *phydev) |
| { |
| int rc; |
| |
| if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { |
| /* unmask all source and clear them before enable */ |
| rc = phy_write(phydev, LAN88XX_INT_MASK, 0x7FFF); |
| rc = phy_read(phydev, LAN88XX_INT_STS); |
| rc = phy_write(phydev, LAN88XX_INT_MASK, |
| LAN88XX_INT_MASK_MDINTPIN_EN_ | |
| LAN88XX_INT_MASK_LINK_CHANGE_); |
| } else { |
| rc = phy_write(phydev, LAN88XX_INT_MASK, 0); |
| } |
| |
| return rc < 0 ? rc : 0; |
| } |
| |
| static int lan88xx_phy_ack_interrupt(struct phy_device *phydev) |
| { |
| int rc = phy_read(phydev, LAN88XX_INT_STS); |
| |
| return rc < 0 ? rc : 0; |
| } |
| |
| static int lan88xx_suspend(struct phy_device *phydev) |
| { |
| struct lan88xx_priv *priv = phydev->priv; |
| |
| /* do not power down PHY when WOL is enabled */ |
| if (!priv->wolopts) |
| genphy_suspend(phydev); |
| |
| return 0; |
| } |
| |
| static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr, |
| u32 data) |
| { |
| int val, save_page, ret = 0; |
| u16 buf; |
| |
| /* Save current page */ |
| save_page = phy_save_page(phydev); |
| if (save_page < 0) { |
| pr_warn("Failed to get current page\n"); |
| goto err; |
| } |
| |
| /* Switch to TR page */ |
| lan88xx_write_page(phydev, LAN88XX_EXT_PAGE_ACCESS_TR); |
| |
| ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA, |
| (data & 0xFFFF)); |
| if (ret < 0) { |
| pr_warn("Failed to write TR low data\n"); |
| goto err; |
| } |
| |
| ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA, |
| (data & 0x00FF0000) >> 16); |
| if (ret < 0) { |
| pr_warn("Failed to write TR high data\n"); |
| goto err; |
| } |
| |
| /* Config control bits [15:13] of register */ |
| buf = (regaddr & ~(0x3 << 13));/* Clr [14:13] to write data in reg */ |
| buf |= 0x8000; /* Set [15] to Packet transmit */ |
| |
| ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf); |
| if (ret < 0) { |
| pr_warn("Failed to write data in reg\n"); |
| goto err; |
| } |
| |
| usleep_range(1000, 2000);/* Wait for Data to be written */ |
| val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR); |
| if (!(val & 0x8000)) |
| pr_warn("TR Register[0x%X] configuration failed\n", regaddr); |
| err: |
| return phy_restore_page(phydev, save_page, ret); |
| } |
| |
| static void lan88xx_config_TR_regs(struct phy_device *phydev) |
| { |
| int err; |
| |
| /* Get access to Channel 0x1, Node 0xF , Register 0x01. |
| * Write 24-bit value 0x12B00A to register. Setting MrvlTrFix1000Kf, |
| * MrvlTrFix1000Kp, MasterEnableTR bits. |
| */ |
| err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A); |
| if (err < 0) |
| pr_warn("Failed to Set Register[0x0F82]\n"); |
| |
| /* Get access to Channel b'10, Node b'1101, Register 0x06. |
| * Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv, |
| * SSTrKp1000Mas bits. |
| */ |
| err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F); |
| if (err < 0) |
| pr_warn("Failed to Set Register[0x168C]\n"); |
| |
| /* Get access to Channel b'10, Node b'1111, Register 0x11. |
| * Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh |
| * bits |
| */ |
| err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620); |
| if (err < 0) |
| pr_warn("Failed to Set Register[0x17A2]\n"); |
| |
| /* Get access to Channel b'10, Node b'1101, Register 0x10. |
| * Write 24-bit value 0xEEFFDD to register. Setting |
| * eee_TrKp1Long_1000, eee_TrKp2Long_1000, eee_TrKp3Long_1000, |
| * eee_TrKp1Short_1000,eee_TrKp2Short_1000, eee_TrKp3Short_1000 bits. |
| */ |
| err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD); |
| if (err < 0) |
| pr_warn("Failed to Set Register[0x16A0]\n"); |
| |
| /* Get access to Channel b'10, Node b'1101, Register 0x13. |
| * Write 24-bit value 0x071448 to register. Setting |
| * slv_lpi_tr_tmr_val1, slv_lpi_tr_tmr_val2 bits. |
| */ |
| err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448); |
| if (err < 0) |
| pr_warn("Failed to Set Register[0x16A6]\n"); |
| |
| /* Get access to Channel b'10, Node b'1101, Register 0x12. |
| * Write 24-bit value 0x13132F to register. Setting |
| * slv_sigdet_timer_val1, slv_sigdet_timer_val2 bits. |
| */ |
| err = lan88xx_TR_reg_set(phydev, 0x16A4, 0x13132F); |
| if (err < 0) |
| pr_warn("Failed to Set Register[0x16A4]\n"); |
| |
| /* Get access to Channel b'10, Node b'1101, Register 0x14. |
| * Write 24-bit value 0x0 to register. Setting eee_3level_delay, |
| * eee_TrKf_freeze_delay bits. |
| */ |
| err = lan88xx_TR_reg_set(phydev, 0x16A8, 0x0); |
| if (err < 0) |
| pr_warn("Failed to Set Register[0x16A8]\n"); |
| |
| /* Get access to Channel b'01, Node b'1111, Register 0x34. |
| * Write 24-bit value 0x91B06C to register. Setting |
| * FastMseSearchThreshLong1000, FastMseSearchThreshShort1000, |
| * FastMseSearchUpdGain1000 bits. |
| */ |
| err = lan88xx_TR_reg_set(phydev, 0x0FE8, 0x91B06C); |
| if (err < 0) |
| pr_warn("Failed to Set Register[0x0FE8]\n"); |
| |
| /* Get access to Channel b'01, Node b'1111, Register 0x3E. |
| * Write 24-bit value 0xC0A028 to register. Setting |
| * FastMseKp2ThreshLong1000, FastMseKp2ThreshShort1000, |
| * FastMseKp2UpdGain1000, FastMseKp2ExitEn1000 bits. |
| */ |
| err = lan88xx_TR_reg_set(phydev, 0x0FFC, 0xC0A028); |
| if (err < 0) |
| pr_warn("Failed to Set Register[0x0FFC]\n"); |
| |
| /* Get access to Channel b'01, Node b'1111, Register 0x35. |
| * Write 24-bit value 0x041600 to register. Setting |
| * FastMseSearchPhShNum1000, FastMseSearchClksPerPh1000, |
| * FastMsePhChangeDelay1000 bits. |
| */ |
| err = lan88xx_TR_reg_set(phydev, 0x0FEA, 0x041600); |
| if (err < 0) |
| pr_warn("Failed to Set Register[0x0FEA]\n"); |
| |
| /* Get access to Channel b'10, Node b'1101, Register 0x03. |
| * Write 24-bit value 0x000004 to register. Setting TrFreeze bits. |
| */ |
| err = lan88xx_TR_reg_set(phydev, 0x1686, 0x000004); |
| if (err < 0) |
| pr_warn("Failed to Set Register[0x1686]\n"); |
| } |
| |
| static int lan88xx_probe(struct phy_device *phydev) |
| { |
| struct device *dev = &phydev->mdio.dev; |
| struct lan88xx_priv *priv; |
| u32 led_modes[4]; |
| int len; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->wolopts = 0; |
| |
| len = of_property_read_variable_u32_array(dev->of_node, |
| "microchip,led-modes", |
| led_modes, |
| 0, |
| ARRAY_SIZE(led_modes)); |
| if (len >= 0) { |
| u32 reg = 0; |
| int i; |
| |
| for (i = 0; i < len; i++) { |
| if (led_modes[i] > 15) |
| return -EINVAL; |
| reg |= led_modes[i] << (i * 4); |
| } |
| for (; i < ARRAY_SIZE(led_modes); i++) |
| reg |= LAN78XX_FORCE_LED_OFF << (i * 4); |
| (void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg); |
| } else if (len == -EOVERFLOW) { |
| return -EINVAL; |
| } |
| |
| /* these values can be used to identify internal PHY */ |
| priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID); |
| priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV); |
| |
| phydev->priv = priv; |
| |
| return 0; |
| } |
| |
| static void lan88xx_remove(struct phy_device *phydev) |
| { |
| struct device *dev = &phydev->mdio.dev; |
| struct lan88xx_priv *priv = phydev->priv; |
| |
| if (priv) |
| devm_kfree(dev, priv); |
| } |
| |
| static int lan88xx_set_wol(struct phy_device *phydev, |
| struct ethtool_wolinfo *wol) |
| { |
| struct lan88xx_priv *priv = phydev->priv; |
| |
| priv->wolopts = wol->wolopts; |
| |
| return 0; |
| } |
| |
| static void lan88xx_set_mdix(struct phy_device *phydev) |
| { |
| int buf; |
| int val; |
| |
| switch (phydev->mdix_ctrl) { |
| case ETH_TP_MDI: |
| val = LAN88XX_EXT_MODE_CTRL_MDI_; |
| break; |
| case ETH_TP_MDI_X: |
| val = LAN88XX_EXT_MODE_CTRL_MDI_X_; |
| break; |
| case ETH_TP_MDI_AUTO: |
| val = LAN88XX_EXT_MODE_CTRL_AUTO_MDIX_; |
| break; |
| default: |
| return; |
| } |
| |
| phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_1); |
| buf = phy_read(phydev, LAN88XX_EXT_MODE_CTRL); |
| buf &= ~LAN88XX_EXT_MODE_CTRL_MDIX_MASK_; |
| buf |= val; |
| phy_write(phydev, LAN88XX_EXT_MODE_CTRL, buf); |
| phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_0); |
| } |
| |
| static int lan88xx_config_init(struct phy_device *phydev) |
| { |
| int val; |
| |
| genphy_config_init(phydev); |
| /*Zerodetect delay enable */ |
| val = phy_read_mmd(phydev, MDIO_MMD_PCS, |
| PHY_ARDENNES_MMD_DEV_3_PHY_CFG); |
| val |= PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_; |
| |
| phy_write_mmd(phydev, MDIO_MMD_PCS, PHY_ARDENNES_MMD_DEV_3_PHY_CFG, |
| val); |
| |
| /* Config DSP registers */ |
| lan88xx_config_TR_regs(phydev); |
| |
| return 0; |
| } |
| |
| static int lan88xx_config_aneg(struct phy_device *phydev) |
| { |
| lan88xx_set_mdix(phydev); |
| |
| return genphy_config_aneg(phydev); |
| } |
| |
| static struct phy_driver microchip_phy_driver[] = { |
| { |
| .phy_id = 0x0007c130, |
| .phy_id_mask = 0xfffffff0, |
| .name = "Microchip LAN88xx", |
| |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| |
| .probe = lan88xx_probe, |
| .remove = lan88xx_remove, |
| |
| .config_init = lan88xx_config_init, |
| .config_aneg = lan88xx_config_aneg, |
| |
| .ack_interrupt = lan88xx_phy_ack_interrupt, |
| .config_intr = lan88xx_phy_config_intr, |
| |
| .suspend = lan88xx_suspend, |
| .resume = genphy_resume, |
| .set_wol = lan88xx_set_wol, |
| .read_page = lan88xx_read_page, |
| .write_page = lan88xx_write_page, |
| } }; |
| |
| module_phy_driver(microchip_phy_driver); |
| |
| static struct mdio_device_id __maybe_unused microchip_tbl[] = { |
| { 0x0007c130, 0xfffffff0 }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(mdio, microchip_tbl); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |