drivers/net/phy/lxt.c - linux - Git at Google

 /*
  * drivers/net/phy/lxt.c
  *
  * Driver for Intel LXT PHYs
  *
  * Author: Andy Fleming
  *
  * Copyright (c) 2004 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  *
  */
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <linux/unistd.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/phy.h>

 #include <asm/io.h>
 #include <asm/irq.h>
 #include <linux/uaccess.h>

 /* The Level one LXT970 is used by many boards				     */

 #define MII_LXT970_IER       17  /* Interrupt Enable Register */

 #define MII_LXT970_IER_IEN	0x0002

 #define MII_LXT970_ISR       18  /* Interrupt Status Register */

 #define MII_LXT970_CONFIG    19  /* Configuration Register    */

 /* ------------------------------------------------------------------------- */
 /* The Level one LXT971 is used on some of my custom boards                  */

 /* register definitions for the 971 */
 #define MII_LXT971_IER		18  /* Interrupt Enable Register */
 #define MII_LXT971_IER_IEN	0x00f2

 #define MII_LXT971_ISR		19  /* Interrupt Status Register */

 /* register definitions for the 973 */
 #define MII_LXT973_PCR 16 /* Port Configuration Register */
 #define PCR_FIBER_SELECT 1

 MODULE_DESCRIPTION("Intel LXT PHY driver");
 MODULE_AUTHOR("Andy Fleming");
 MODULE_LICENSE("GPL");

 static int lxt970_ack_interrupt(struct phy_device *phydev)
 {
 	int err;

 	err = phy_read(phydev, MII_BMSR);

 	if (err < 0)
 		return err;

 	err = phy_read(phydev, MII_LXT970_ISR);

 	if (err < 0)
 		return err;

 	return 0;
 }

 static int lxt970_config_intr(struct phy_device *phydev)
 {
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 		return phy_write(phydev, MII_LXT970_IER, MII_LXT970_IER_IEN);
 	else
 		return phy_write(phydev, MII_LXT970_IER, 0);
 }

 static int lxt970_config_init(struct phy_device *phydev)
 {
 	return phy_write(phydev, MII_LXT970_CONFIG, 0);
 }


 static int lxt971_ack_interrupt(struct phy_device *phydev)
 {
 	int err = phy_read(phydev, MII_LXT971_ISR);

 	if (err < 0)
 		return err;

 	return 0;
 }

 static int lxt971_config_intr(struct phy_device *phydev)
 {
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 		return phy_write(phydev, MII_LXT971_IER, MII_LXT971_IER_IEN);
 	else
 		return phy_write(phydev, MII_LXT971_IER, 0);
 }

 /*
  * A2 version of LXT973 chip has an ERRATA: it randomly return the contents
  * of the previous even register when you read a odd register regularly
  */

 static int lxt973a2_update_link(struct phy_device *phydev)
 {
 	int status;
 	int control;
 	int retry = 8; /* we try 8 times */

 	/* Do a fake read */
 	status = phy_read(phydev, MII_BMSR);

 	if (status < 0)
 		return status;

 	control = phy_read(phydev, MII_BMCR);
 	if (control < 0)
 		return control;

 	do {
 		/* Read link and autonegotiation status */
 		status = phy_read(phydev, MII_BMSR);
 	} while (status >= 0 && retry-- && status == control);

 	if (status < 0)
 		return status;

 	if ((status & BMSR_LSTATUS) == 0)
 		phydev->link = 0;
 	else
 		phydev->link = 1;

 	return 0;
 }

 static int lxt973a2_read_status(struct phy_device *phydev)
 {
 	int adv;
 	int err;
 	int lpa;

 	/* Update the link, but return if there was an error */
 	err = lxt973a2_update_link(phydev);
 	if (err)
 		return err;

 	if (AUTONEG_ENABLE == phydev->autoneg) {
 		int retry = 1;

 		adv = phy_read(phydev, MII_ADVERTISE);

 		if (adv < 0)
 			return adv;

 		do {
 			lpa = phy_read(phydev, MII_LPA);

 			if (lpa < 0)
 				return lpa;

 			/* If both registers are equal, it is suspect but not
 			* impossible, hence a new try
 			*/
 		} while (lpa == adv && retry--);

 		phydev->lp_advertising = mii_lpa_to_ethtool_lpa_t(lpa);

 		lpa &= adv;

 		phydev->speed = SPEED_10;
 		phydev->duplex = DUPLEX_HALF;
 		phydev->pause = phydev->asym_pause = 0;

 		if (lpa & (LPA_100FULL | LPA_100HALF)) {
 			phydev->speed = SPEED_100;

 			if (lpa & LPA_100FULL)
 				phydev->duplex = DUPLEX_FULL;
 		} else {
 			if (lpa & LPA_10FULL)
 				phydev->duplex = DUPLEX_FULL;
 		}

 		if (phydev->duplex == DUPLEX_FULL) {
 			phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
 			phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
 		}
 	} else {
 		int bmcr = phy_read(phydev, MII_BMCR);

 		if (bmcr < 0)
 			return bmcr;

 		if (bmcr & BMCR_FULLDPLX)
 			phydev->duplex = DUPLEX_FULL;
 		else
 			phydev->duplex = DUPLEX_HALF;

 		if (bmcr & BMCR_SPEED1000)
 			phydev->speed = SPEED_1000;
 		else if (bmcr & BMCR_SPEED100)
 			phydev->speed = SPEED_100;
 		else
 			phydev->speed = SPEED_10;

 		phydev->pause = phydev->asym_pause = 0;
 		phydev->lp_advertising = 0;
 	}

 	return 0;
 }

 static int lxt973_probe(struct phy_device *phydev)
 {
 	int val = phy_read(phydev, MII_LXT973_PCR);

 	if (val & PCR_FIBER_SELECT) {
 		/*
 		 * If fiber is selected, then the only correct setting
 		 * is 100Mbps, full duplex, and auto negotiation off.
 		 */
 		val = phy_read(phydev, MII_BMCR);
 		val |= (BMCR_SPEED100 | BMCR_FULLDPLX);
 		val &= ~BMCR_ANENABLE;
 		phy_write(phydev, MII_BMCR, val);
 		/* Remember that the port is in fiber mode. */
 		phydev->priv = lxt973_probe;
 	} else {
 		phydev->priv = NULL;
 	}
 	return 0;
 }

 static int lxt973_config_aneg(struct phy_device *phydev)
 {
 	/* Do nothing if port is in fiber mode. */
 	return phydev->priv ? 0 : genphy_config_aneg(phydev);
 }

 static struct phy_driver lxt97x_driver[] = {
 {
 	.phy_id		= 0x78100000,
 	.name		= "LXT970",
 	.phy_id_mask	= 0xfffffff0,
 	.features	= PHY_BASIC_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= lxt970_config_init,
 	.ack_interrupt	= lxt970_ack_interrupt,
 	.config_intr	= lxt970_config_intr,
 }, {
 	.phy_id		= 0x001378e0,
 	.name		= "LXT971",
 	.phy_id_mask	= 0xfffffff0,
 	.features	= PHY_BASIC_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.ack_interrupt	= lxt971_ack_interrupt,
 	.config_intr	= lxt971_config_intr,
 }, {
 	.phy_id		= 0x00137a10,
 	.name		= "LXT973-A2",
 	.phy_id_mask	= 0xffffffff,
 	.features	= PHY_BASIC_FEATURES,
 	.flags		= 0,
 	.probe		= lxt973_probe,
 	.config_aneg	= lxt973_config_aneg,
 	.read_status	= lxt973a2_read_status,
 }, {
 	.phy_id		= 0x00137a10,
 	.name		= "LXT973",
 	.phy_id_mask	= 0xfffffff0,
 	.features	= PHY_BASIC_FEATURES,
 	.flags		= 0,
 	.probe		= lxt973_probe,
 	.config_aneg	= lxt973_config_aneg,
 } };

 module_phy_driver(lxt97x_driver);

 static struct mdio_device_id __maybe_unused lxt_tbl[] = {
 	{ 0x78100000, 0xfffffff0 },
 	{ 0x001378e0, 0xfffffff0 },
 	{ 0x00137a10, 0xfffffff0 },
 	{ }
 };

 MODULE_DEVICE_TABLE(mdio, lxt_tbl);
	/*
	* drivers/net/phy/lxt.c
	*
	* Driver for Intel LXT PHYs
	*
	* Author: Andy Fleming
	*
	* Copyright (c) 2004 Freescale Semiconductor, Inc.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*
	*/
	#include <linux/kernel.h>
	#include <linux/string.h>
	#include <linux/errno.h>
	#include <linux/unistd.h>
	#include <linux/interrupt.h>
	#include <linux/init.h>
	#include <linux/delay.h>
	#include <linux/netdevice.h>
	#include <linux/etherdevice.h>
	#include <linux/skbuff.h>
	#include <linux/spinlock.h>
	#include <linux/mm.h>
	#include <linux/module.h>
	#include <linux/mii.h>
	#include <linux/ethtool.h>
	#include <linux/phy.h>

	#include <asm/io.h>
	#include <asm/irq.h>
	#include <linux/uaccess.h>

	/* The Level one LXT970 is used by many boards */

	#define MII_LXT970_IER 17 /* Interrupt Enable Register */

	#define MII_LXT970_IER_IEN 0x0002

	#define MII_LXT970_ISR 18 /* Interrupt Status Register */

	#define MII_LXT970_CONFIG 19 /* Configuration Register */

	/* ------------------------------------------------------------------------- */
	/* The Level one LXT971 is used on some of my custom boards */

	/* register definitions for the 971 */
	#define MII_LXT971_IER 18 /* Interrupt Enable Register */
	#define MII_LXT971_IER_IEN 0x00f2

	#define MII_LXT971_ISR 19 /* Interrupt Status Register */

	/* register definitions for the 973 */
	#define MII_LXT973_PCR 16 /* Port Configuration Register */
	#define PCR_FIBER_SELECT 1

	MODULE_DESCRIPTION("Intel LXT PHY driver");
	MODULE_AUTHOR("Andy Fleming");
	MODULE_LICENSE("GPL");

	static int lxt970_ack_interrupt(struct phy_device *phydev)
	{
	int err;

	err = phy_read(phydev, MII_BMSR);

	if (err < 0)
	return err;

	err = phy_read(phydev, MII_LXT970_ISR);

	if (err < 0)
	return err;

	return 0;
	}

	static int lxt970_config_intr(struct phy_device *phydev)
	{
	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
	return phy_write(phydev, MII_LXT970_IER, MII_LXT970_IER_IEN);
	else
	return phy_write(phydev, MII_LXT970_IER, 0);
	}

	static int lxt970_config_init(struct phy_device *phydev)
	{
	return phy_write(phydev, MII_LXT970_CONFIG, 0);
	}


	static int lxt971_ack_interrupt(struct phy_device *phydev)
	{
	int err = phy_read(phydev, MII_LXT971_ISR);

	if (err < 0)
	return err;

	return 0;
	}

	static int lxt971_config_intr(struct phy_device *phydev)
	{
	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
	return phy_write(phydev, MII_LXT971_IER, MII_LXT971_IER_IEN);
	else
	return phy_write(phydev, MII_LXT971_IER, 0);
	}

	/*
	* A2 version of LXT973 chip has an ERRATA: it randomly return the contents
	* of the previous even register when you read a odd register regularly
	*/

	static int lxt973a2_update_link(struct phy_device *phydev)
	{
	int status;
	int control;
	int retry = 8; /* we try 8 times */

	/* Do a fake read */
	status = phy_read(phydev, MII_BMSR);

	if (status < 0)
	return status;

	control = phy_read(phydev, MII_BMCR);
	if (control < 0)
	return control;

	do {
	/* Read link and autonegotiation status */
	status = phy_read(phydev, MII_BMSR);
	} while (status >= 0 && retry-- && status == control);

	if (status < 0)
	return status;

	if ((status & BMSR_LSTATUS) == 0)
	phydev->link = 0;
	else
	phydev->link = 1;

	return 0;
	}

	static int lxt973a2_read_status(struct phy_device *phydev)
	{
	int adv;
	int err;
	int lpa;

	/* Update the link, but return if there was an error */
	err = lxt973a2_update_link(phydev);
	if (err)
	return err;

	if (AUTONEG_ENABLE == phydev->autoneg) {
	int retry = 1;

	adv = phy_read(phydev, MII_ADVERTISE);

	if (adv < 0)
	return adv;

	do {
	lpa = phy_read(phydev, MII_LPA);

	if (lpa < 0)
	return lpa;

	/* If both registers are equal, it is suspect but not
	* impossible, hence a new try
	*/
	} while (lpa == adv && retry--);

	phydev->lp_advertising = mii_lpa_to_ethtool_lpa_t(lpa);

	lpa &= adv;

	phydev->speed = SPEED_10;
	phydev->duplex = DUPLEX_HALF;
	phydev->pause = phydev->asym_pause = 0;

	if (lpa & (LPA_100FULL \| LPA_100HALF)) {
	phydev->speed = SPEED_100;

	if (lpa & LPA_100FULL)
	phydev->duplex = DUPLEX_FULL;
	} else {
	if (lpa & LPA_10FULL)
	phydev->duplex = DUPLEX_FULL;
	}

	if (phydev->duplex == DUPLEX_FULL) {
	phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
	phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
	}
	} else {
	int bmcr = phy_read(phydev, MII_BMCR);

	if (bmcr < 0)
	return bmcr;

	if (bmcr & BMCR_FULLDPLX)
	phydev->duplex = DUPLEX_FULL;
	else
	phydev->duplex = DUPLEX_HALF;

	if (bmcr & BMCR_SPEED1000)
	phydev->speed = SPEED_1000;
	else if (bmcr & BMCR_SPEED100)
	phydev->speed = SPEED_100;
	else
	phydev->speed = SPEED_10;

	phydev->pause = phydev->asym_pause = 0;
	phydev->lp_advertising = 0;
	}

	return 0;
	}

	static int lxt973_probe(struct phy_device *phydev)
	{
	int val = phy_read(phydev, MII_LXT973_PCR);

	if (val & PCR_FIBER_SELECT) {
	/*
	* If fiber is selected, then the only correct setting
	* is 100Mbps, full duplex, and auto negotiation off.
	*/
	val = phy_read(phydev, MII_BMCR);
	val \|= (BMCR_SPEED100 \| BMCR_FULLDPLX);
	val &= ~BMCR_ANENABLE;
	phy_write(phydev, MII_BMCR, val);
	/* Remember that the port is in fiber mode. */
	phydev->priv = lxt973_probe;
	} else {
	phydev->priv = NULL;
	}
	return 0;
	}

	static int lxt973_config_aneg(struct phy_device *phydev)
	{
	/* Do nothing if port is in fiber mode. */
	return phydev->priv ? 0 : genphy_config_aneg(phydev);
	}

	static struct phy_driver lxt97x_driver[] = {
	{
	.phy_id = 0x78100000,
	.name = "LXT970",
	.phy_id_mask = 0xfffffff0,
	.features = PHY_BASIC_FEATURES,
	.flags = PHY_HAS_INTERRUPT,
	.config_init = lxt970_config_init,
	.ack_interrupt = lxt970_ack_interrupt,
	.config_intr = lxt970_config_intr,
	}, {
	.phy_id = 0x001378e0,
	.name = "LXT971",
	.phy_id_mask = 0xfffffff0,
	.features = PHY_BASIC_FEATURES,
	.flags = PHY_HAS_INTERRUPT,
	.ack_interrupt = lxt971_ack_interrupt,
	.config_intr = lxt971_config_intr,
	}, {
	.phy_id = 0x00137a10,
	.name = "LXT973-A2",
	.phy_id_mask = 0xffffffff,
	.features = PHY_BASIC_FEATURES,
	.flags = 0,
	.probe = lxt973_probe,
	.config_aneg = lxt973_config_aneg,
	.read_status = lxt973a2_read_status,
	}, {
	.phy_id = 0x00137a10,
	.name = "LXT973",
	.phy_id_mask = 0xfffffff0,
	.features = PHY_BASIC_FEATURES,
	.flags = 0,
	.probe = lxt973_probe,
	.config_aneg = lxt973_config_aneg,
	} };

	module_phy_driver(lxt97x_driver);

	static struct mdio_device_id __maybe_unused lxt_tbl[] = {
	{ 0x78100000, 0xfffffff0 },
	{ 0x001378e0, 0xfffffff0 },
	{ 0x00137a10, 0xfffffff0 },
	{ }
	};

	MODULE_DEVICE_TABLE(mdio, lxt_tbl);