| /* |
| * TM2 touchkey device driver |
| * |
| * Copyright 2005 Phil Blundell |
| * Copyright 2016 Samsung Electronics Co., Ltd. |
| * |
| * Author: Beomho Seo <beomho.seo@samsung.com> |
| * Author: Jaechul Lee <jcsing.lee@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/i2c.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/pm.h> |
| #include <linux/regulator/consumer.h> |
| |
| #define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey" |
| #define TM2_TOUCHKEY_KEYCODE_REG 0x03 |
| #define TM2_TOUCHKEY_BASE_REG 0x00 |
| #define TM2_TOUCHKEY_CMD_LED_ON 0x10 |
| #define TM2_TOUCHKEY_CMD_LED_OFF 0x20 |
| #define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3) |
| #define TM2_TOUCHKEY_BIT_KEYCODE GENMASK(2, 0) |
| #define TM2_TOUCHKEY_LED_VOLTAGE_MIN 2500000 |
| #define TM2_TOUCHKEY_LED_VOLTAGE_MAX 3300000 |
| |
| enum { |
| TM2_TOUCHKEY_KEY_MENU = 0x1, |
| TM2_TOUCHKEY_KEY_BACK, |
| }; |
| |
| struct tm2_touchkey_data { |
| struct i2c_client *client; |
| struct input_dev *input_dev; |
| struct led_classdev led_dev; |
| struct regulator *vdd; |
| struct regulator_bulk_data regulators[2]; |
| }; |
| |
| static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev, |
| enum led_brightness brightness) |
| { |
| struct tm2_touchkey_data *touchkey = |
| container_of(led_dev, struct tm2_touchkey_data, led_dev); |
| u32 volt; |
| u8 data; |
| |
| if (brightness == LED_OFF) { |
| volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN; |
| data = TM2_TOUCHKEY_CMD_LED_OFF; |
| } else { |
| volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX; |
| data = TM2_TOUCHKEY_CMD_LED_ON; |
| } |
| |
| regulator_set_voltage(touchkey->vdd, volt, volt); |
| i2c_smbus_write_byte_data(touchkey->client, |
| TM2_TOUCHKEY_BASE_REG, data); |
| } |
| |
| static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey) |
| { |
| int error; |
| |
| error = regulator_bulk_enable(ARRAY_SIZE(touchkey->regulators), |
| touchkey->regulators); |
| if (error) |
| return error; |
| |
| /* waiting for device initialization, at least 150ms */ |
| msleep(150); |
| |
| return 0; |
| } |
| |
| static void tm2_touchkey_power_disable(void *data) |
| { |
| struct tm2_touchkey_data *touchkey = data; |
| |
| regulator_bulk_disable(ARRAY_SIZE(touchkey->regulators), |
| touchkey->regulators); |
| } |
| |
| static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid) |
| { |
| struct tm2_touchkey_data *touchkey = devid; |
| int data; |
| int key; |
| |
| data = i2c_smbus_read_byte_data(touchkey->client, |
| TM2_TOUCHKEY_KEYCODE_REG); |
| if (data < 0) { |
| dev_err(&touchkey->client->dev, |
| "failed to read i2c data: %d\n", data); |
| goto out; |
| } |
| |
| switch (data & TM2_TOUCHKEY_BIT_KEYCODE) { |
| case TM2_TOUCHKEY_KEY_MENU: |
| key = KEY_PHONE; |
| break; |
| |
| case TM2_TOUCHKEY_KEY_BACK: |
| key = KEY_BACK; |
| break; |
| |
| default: |
| dev_warn(&touchkey->client->dev, |
| "unhandled keycode, data %#02x\n", data); |
| goto out; |
| } |
| |
| if (data & TM2_TOUCHKEY_BIT_PRESS_EV) { |
| input_report_key(touchkey->input_dev, KEY_PHONE, 0); |
| input_report_key(touchkey->input_dev, KEY_BACK, 0); |
| } else { |
| input_report_key(touchkey->input_dev, key, 1); |
| } |
| |
| input_sync(touchkey->input_dev); |
| |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| static int tm2_touchkey_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct tm2_touchkey_data *touchkey; |
| int error; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA)) { |
| dev_err(&client->dev, "incompatible I2C adapter\n"); |
| return -EIO; |
| } |
| |
| touchkey = devm_kzalloc(&client->dev, sizeof(*touchkey), GFP_KERNEL); |
| if (!touchkey) |
| return -ENOMEM; |
| |
| touchkey->client = client; |
| i2c_set_clientdata(client, touchkey); |
| |
| touchkey->regulators[0].supply = "vcc"; |
| touchkey->regulators[1].supply = "vdd"; |
| error = devm_regulator_bulk_get(&client->dev, |
| ARRAY_SIZE(touchkey->regulators), |
| touchkey->regulators); |
| if (error) { |
| dev_err(&client->dev, "failed to get regulators: %d\n", error); |
| return error; |
| } |
| |
| /* Save VDD for easy access */ |
| touchkey->vdd = touchkey->regulators[1].consumer; |
| |
| error = tm2_touchkey_power_enable(touchkey); |
| if (error) { |
| dev_err(&client->dev, "failed to power up device: %d\n", error); |
| return error; |
| } |
| |
| error = devm_add_action_or_reset(&client->dev, |
| tm2_touchkey_power_disable, touchkey); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to install poweroff handler: %d\n", error); |
| return error; |
| } |
| |
| /* input device */ |
| touchkey->input_dev = devm_input_allocate_device(&client->dev); |
| if (!touchkey->input_dev) { |
| dev_err(&client->dev, "failed to allocate input device\n"); |
| return -ENOMEM; |
| } |
| |
| touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME; |
| touchkey->input_dev->id.bustype = BUS_I2C; |
| |
| input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE); |
| input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK); |
| |
| error = input_register_device(touchkey->input_dev); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to register input device: %d\n", error); |
| return error; |
| } |
| |
| error = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, tm2_touchkey_irq_handler, |
| IRQF_ONESHOT, |
| TM2_TOUCHKEY_DEV_NAME, touchkey); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to request threaded irq: %d\n", error); |
| return error; |
| } |
| |
| /* led device */ |
| touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME; |
| touchkey->led_dev.brightness = LED_FULL; |
| touchkey->led_dev.max_brightness = LED_ON; |
| touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set; |
| |
| error = devm_led_classdev_register(&client->dev, &touchkey->led_dev); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to register touchkey led: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int __maybe_unused tm2_touchkey_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client); |
| |
| disable_irq(client->irq); |
| tm2_touchkey_power_disable(touchkey); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused tm2_touchkey_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client); |
| int ret; |
| |
| enable_irq(client->irq); |
| |
| ret = tm2_touchkey_power_enable(touchkey); |
| if (ret) |
| dev_err(dev, "failed to enable power: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops, |
| tm2_touchkey_suspend, tm2_touchkey_resume); |
| |
| static const struct i2c_device_id tm2_touchkey_id_table[] = { |
| { TM2_TOUCHKEY_DEV_NAME, 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table); |
| |
| static const struct of_device_id tm2_touchkey_of_match[] = { |
| { .compatible = "cypress,tm2-touchkey", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match); |
| |
| static struct i2c_driver tm2_touchkey_driver = { |
| .driver = { |
| .name = TM2_TOUCHKEY_DEV_NAME, |
| .pm = &tm2_touchkey_pm_ops, |
| .of_match_table = of_match_ptr(tm2_touchkey_of_match), |
| }, |
| .probe = tm2_touchkey_probe, |
| .id_table = tm2_touchkey_id_table, |
| }; |
| module_i2c_driver(tm2_touchkey_driver); |
| |
| MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>"); |
| MODULE_AUTHOR("Jaechul Lee <jcsing.lee@samsung.com>"); |
| MODULE_DESCRIPTION("Samsung touchkey driver"); |
| MODULE_LICENSE("GPL v2"); |