| /* |
| * STMicroelectronics Key Scanning driver |
| * |
| * Copyright (c) 2014 STMicroelectonics Ltd. |
| * Author: Stuart Menefy <stuart.menefy@st.com> |
| * |
| * Based on sh_keysc.c, copyright 2008 Magnus Damm |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/input/matrix_keypad.h> |
| |
| #define ST_KEYSCAN_MAXKEYS 16 |
| |
| #define KEYSCAN_CONFIG_OFF 0x0 |
| #define KEYSCAN_CONFIG_ENABLE 0x1 |
| #define KEYSCAN_DEBOUNCE_TIME_OFF 0x4 |
| #define KEYSCAN_MATRIX_STATE_OFF 0x8 |
| #define KEYSCAN_MATRIX_DIM_OFF 0xc |
| #define KEYSCAN_MATRIX_DIM_X_SHIFT 0x0 |
| #define KEYSCAN_MATRIX_DIM_Y_SHIFT 0x2 |
| |
| struct st_keyscan { |
| void __iomem *base; |
| int irq; |
| struct clk *clk; |
| struct input_dev *input_dev; |
| unsigned long last_state; |
| unsigned int n_rows; |
| unsigned int n_cols; |
| unsigned int debounce_us; |
| }; |
| |
| static irqreturn_t keyscan_isr(int irq, void *dev_id) |
| { |
| struct st_keyscan *keypad = dev_id; |
| unsigned short *keycode = keypad->input_dev->keycode; |
| unsigned long state, change; |
| int bit_nr; |
| |
| state = readl(keypad->base + KEYSCAN_MATRIX_STATE_OFF) & 0xffff; |
| change = keypad->last_state ^ state; |
| keypad->last_state = state; |
| |
| for_each_set_bit(bit_nr, &change, BITS_PER_LONG) |
| input_report_key(keypad->input_dev, |
| keycode[bit_nr], state & BIT(bit_nr)); |
| |
| input_sync(keypad->input_dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int keyscan_start(struct st_keyscan *keypad) |
| { |
| int error; |
| |
| error = clk_enable(keypad->clk); |
| if (error) |
| return error; |
| |
| writel(keypad->debounce_us * (clk_get_rate(keypad->clk) / 1000000), |
| keypad->base + KEYSCAN_DEBOUNCE_TIME_OFF); |
| |
| writel(((keypad->n_cols - 1) << KEYSCAN_MATRIX_DIM_X_SHIFT) | |
| ((keypad->n_rows - 1) << KEYSCAN_MATRIX_DIM_Y_SHIFT), |
| keypad->base + KEYSCAN_MATRIX_DIM_OFF); |
| |
| writel(KEYSCAN_CONFIG_ENABLE, keypad->base + KEYSCAN_CONFIG_OFF); |
| |
| return 0; |
| } |
| |
| static void keyscan_stop(struct st_keyscan *keypad) |
| { |
| writel(0, keypad->base + KEYSCAN_CONFIG_OFF); |
| |
| clk_disable(keypad->clk); |
| } |
| |
| static int keyscan_open(struct input_dev *dev) |
| { |
| struct st_keyscan *keypad = input_get_drvdata(dev); |
| |
| return keyscan_start(keypad); |
| } |
| |
| static void keyscan_close(struct input_dev *dev) |
| { |
| struct st_keyscan *keypad = input_get_drvdata(dev); |
| |
| keyscan_stop(keypad); |
| } |
| |
| static int keypad_matrix_key_parse_dt(struct st_keyscan *keypad_data) |
| { |
| struct device *dev = keypad_data->input_dev->dev.parent; |
| struct device_node *np = dev->of_node; |
| int error; |
| |
| error = matrix_keypad_parse_properties(dev, &keypad_data->n_rows, |
| &keypad_data->n_cols); |
| if (error) { |
| dev_err(dev, "failed to parse keypad params\n"); |
| return error; |
| } |
| |
| of_property_read_u32(np, "st,debounce-us", &keypad_data->debounce_us); |
| |
| dev_dbg(dev, "n_rows=%d n_col=%d debounce=%d\n", |
| keypad_data->n_rows, keypad_data->n_cols, |
| keypad_data->debounce_us); |
| |
| return 0; |
| } |
| |
| static int keyscan_probe(struct platform_device *pdev) |
| { |
| struct st_keyscan *keypad_data; |
| struct input_dev *input_dev; |
| struct resource *res; |
| int error; |
| |
| if (!pdev->dev.of_node) { |
| dev_err(&pdev->dev, "no DT data present\n"); |
| return -EINVAL; |
| } |
| |
| keypad_data = devm_kzalloc(&pdev->dev, sizeof(*keypad_data), |
| GFP_KERNEL); |
| if (!keypad_data) |
| return -ENOMEM; |
| |
| input_dev = devm_input_allocate_device(&pdev->dev); |
| if (!input_dev) { |
| dev_err(&pdev->dev, "failed to allocate the input device\n"); |
| return -ENOMEM; |
| } |
| |
| input_dev->name = pdev->name; |
| input_dev->phys = "keyscan-keys/input0"; |
| input_dev->dev.parent = &pdev->dev; |
| input_dev->open = keyscan_open; |
| input_dev->close = keyscan_close; |
| |
| input_dev->id.bustype = BUS_HOST; |
| |
| error = keypad_matrix_key_parse_dt(keypad_data); |
| if (error) |
| return error; |
| |
| error = matrix_keypad_build_keymap(NULL, NULL, |
| keypad_data->n_rows, |
| keypad_data->n_cols, |
| NULL, input_dev); |
| if (error) { |
| dev_err(&pdev->dev, "failed to build keymap\n"); |
| return error; |
| } |
| |
| input_set_drvdata(input_dev, keypad_data); |
| |
| keypad_data->input_dev = input_dev; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| keypad_data->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(keypad_data->base)) |
| return PTR_ERR(keypad_data->base); |
| |
| keypad_data->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(keypad_data->clk)) { |
| dev_err(&pdev->dev, "cannot get clock\n"); |
| return PTR_ERR(keypad_data->clk); |
| } |
| |
| error = clk_enable(keypad_data->clk); |
| if (error) { |
| dev_err(&pdev->dev, "failed to enable clock\n"); |
| return error; |
| } |
| |
| keyscan_stop(keypad_data); |
| |
| keypad_data->irq = platform_get_irq(pdev, 0); |
| if (keypad_data->irq < 0) { |
| dev_err(&pdev->dev, "no IRQ specified\n"); |
| return -EINVAL; |
| } |
| |
| error = devm_request_irq(&pdev->dev, keypad_data->irq, keyscan_isr, 0, |
| pdev->name, keypad_data); |
| if (error) { |
| dev_err(&pdev->dev, "failed to request IRQ\n"); |
| return error; |
| } |
| |
| error = input_register_device(input_dev); |
| if (error) { |
| dev_err(&pdev->dev, "failed to register input device\n"); |
| return error; |
| } |
| |
| platform_set_drvdata(pdev, keypad_data); |
| |
| device_set_wakeup_capable(&pdev->dev, 1); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int keyscan_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct st_keyscan *keypad = platform_get_drvdata(pdev); |
| struct input_dev *input = keypad->input_dev; |
| |
| mutex_lock(&input->mutex); |
| |
| if (device_may_wakeup(dev)) |
| enable_irq_wake(keypad->irq); |
| else if (input->users) |
| keyscan_stop(keypad); |
| |
| mutex_unlock(&input->mutex); |
| return 0; |
| } |
| |
| static int keyscan_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct st_keyscan *keypad = platform_get_drvdata(pdev); |
| struct input_dev *input = keypad->input_dev; |
| int retval = 0; |
| |
| mutex_lock(&input->mutex); |
| |
| if (device_may_wakeup(dev)) |
| disable_irq_wake(keypad->irq); |
| else if (input->users) |
| retval = keyscan_start(keypad); |
| |
| mutex_unlock(&input->mutex); |
| return retval; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(keyscan_dev_pm_ops, keyscan_suspend, keyscan_resume); |
| |
| static const struct of_device_id keyscan_of_match[] = { |
| { .compatible = "st,sti-keyscan" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, keyscan_of_match); |
| |
| static struct platform_driver keyscan_device_driver = { |
| .probe = keyscan_probe, |
| .driver = { |
| .name = "st-keyscan", |
| .pm = &keyscan_dev_pm_ops, |
| .of_match_table = of_match_ptr(keyscan_of_match), |
| } |
| }; |
| |
| module_platform_driver(keyscan_device_driver); |
| |
| MODULE_AUTHOR("Stuart Menefy <stuart.menefy@st.com>"); |
| MODULE_DESCRIPTION("STMicroelectronics keyscan device driver"); |
| MODULE_LICENSE("GPL"); |