| /* |
| * max7359_keypad.c - MAX7359 Key Switch Controller Driver |
| * |
| * Copyright (C) 2009 Samsung Electronics |
| * Kim Kyuwon <q1.kim@samsung.com> |
| * |
| * Based on pxa27x_keypad.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456 |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/pm.h> |
| #include <linux/input.h> |
| #include <linux/input/matrix_keypad.h> |
| |
| #define MAX7359_MAX_KEY_ROWS 8 |
| #define MAX7359_MAX_KEY_COLS 8 |
| #define MAX7359_MAX_KEY_NUM (MAX7359_MAX_KEY_ROWS * MAX7359_MAX_KEY_COLS) |
| #define MAX7359_ROW_SHIFT 3 |
| |
| /* |
| * MAX7359 registers |
| */ |
| #define MAX7359_REG_KEYFIFO 0x00 |
| #define MAX7359_REG_CONFIG 0x01 |
| #define MAX7359_REG_DEBOUNCE 0x02 |
| #define MAX7359_REG_INTERRUPT 0x03 |
| #define MAX7359_REG_PORTS 0x04 |
| #define MAX7359_REG_KEYREP 0x05 |
| #define MAX7359_REG_SLEEP 0x06 |
| |
| /* |
| * Configuration register bits |
| */ |
| #define MAX7359_CFG_SLEEP (1 << 7) |
| #define MAX7359_CFG_INTERRUPT (1 << 5) |
| #define MAX7359_CFG_KEY_RELEASE (1 << 3) |
| #define MAX7359_CFG_WAKEUP (1 << 1) |
| #define MAX7359_CFG_TIMEOUT (1 << 0) |
| |
| /* |
| * Autosleep register values (ms) |
| */ |
| #define MAX7359_AUTOSLEEP_8192 0x01 |
| #define MAX7359_AUTOSLEEP_4096 0x02 |
| #define MAX7359_AUTOSLEEP_2048 0x03 |
| #define MAX7359_AUTOSLEEP_1024 0x04 |
| #define MAX7359_AUTOSLEEP_512 0x05 |
| #define MAX7359_AUTOSLEEP_256 0x06 |
| |
| struct max7359_keypad { |
| /* matrix key code map */ |
| unsigned short keycodes[MAX7359_MAX_KEY_NUM]; |
| |
| struct input_dev *input_dev; |
| struct i2c_client *client; |
| }; |
| |
| static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val) |
| { |
| int ret = i2c_smbus_write_byte_data(client, reg, val); |
| |
| if (ret < 0) |
| dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n", |
| __func__, reg, val, ret); |
| return ret; |
| } |
| |
| static int max7359_read_reg(struct i2c_client *client, int reg) |
| { |
| int ret = i2c_smbus_read_byte_data(client, reg); |
| |
| if (ret < 0) |
| dev_err(&client->dev, "%s: reg 0x%x, err %d\n", |
| __func__, reg, ret); |
| return ret; |
| } |
| |
| /* runs in an IRQ thread -- can (and will!) sleep */ |
| static irqreturn_t max7359_interrupt(int irq, void *dev_id) |
| { |
| struct max7359_keypad *keypad = dev_id; |
| struct input_dev *input_dev = keypad->input_dev; |
| int val, row, col, release, code; |
| |
| val = max7359_read_reg(keypad->client, MAX7359_REG_KEYFIFO); |
| row = val & 0x7; |
| col = (val >> 3) & 0x7; |
| release = val & 0x40; |
| |
| code = MATRIX_SCAN_CODE(row, col, MAX7359_ROW_SHIFT); |
| |
| dev_dbg(&keypad->client->dev, |
| "key[%d:%d] %s\n", row, col, release ? "release" : "press"); |
| |
| input_event(input_dev, EV_MSC, MSC_SCAN, code); |
| input_report_key(input_dev, keypad->keycodes[code], !release); |
| input_sync(input_dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Let MAX7359 fall into a deep sleep: |
| * If no keys are pressed, enter sleep mode for 8192 ms. And if any |
| * key is pressed, the MAX7359 returns to normal operating mode. |
| */ |
| static inline void max7359_fall_deepsleep(struct i2c_client *client) |
| { |
| max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_8192); |
| } |
| |
| /* |
| * Let MAX7359 take a catnap: |
| * Autosleep just for 256 ms. |
| */ |
| static inline void max7359_take_catnap(struct i2c_client *client) |
| { |
| max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_256); |
| } |
| |
| static int max7359_open(struct input_dev *dev) |
| { |
| struct max7359_keypad *keypad = input_get_drvdata(dev); |
| |
| max7359_take_catnap(keypad->client); |
| |
| return 0; |
| } |
| |
| static void max7359_close(struct input_dev *dev) |
| { |
| struct max7359_keypad *keypad = input_get_drvdata(dev); |
| |
| max7359_fall_deepsleep(keypad->client); |
| } |
| |
| static void max7359_initialize(struct i2c_client *client) |
| { |
| max7359_write_reg(client, MAX7359_REG_CONFIG, |
| MAX7359_CFG_KEY_RELEASE | /* Key release enable */ |
| MAX7359_CFG_WAKEUP); /* Key press wakeup enable */ |
| |
| /* Full key-scan functionality */ |
| max7359_write_reg(client, MAX7359_REG_DEBOUNCE, 0x1F); |
| |
| /* nINT asserts every debounce cycles */ |
| max7359_write_reg(client, MAX7359_REG_INTERRUPT, 0x01); |
| |
| max7359_fall_deepsleep(client); |
| } |
| |
| static int max7359_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| const struct matrix_keymap_data *keymap_data = |
| dev_get_platdata(&client->dev); |
| struct max7359_keypad *keypad; |
| struct input_dev *input_dev; |
| int ret; |
| int error; |
| |
| if (!client->irq) { |
| dev_err(&client->dev, "The irq number should not be zero\n"); |
| return -EINVAL; |
| } |
| |
| /* Detect MAX7359: The initial Keys FIFO value is '0x3F' */ |
| ret = max7359_read_reg(client, MAX7359_REG_KEYFIFO); |
| if (ret < 0) { |
| dev_err(&client->dev, "failed to detect device\n"); |
| return -ENODEV; |
| } |
| |
| dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret); |
| |
| keypad = devm_kzalloc(&client->dev, sizeof(struct max7359_keypad), |
| GFP_KERNEL); |
| if (!keypad) { |
| dev_err(&client->dev, "failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| input_dev = devm_input_allocate_device(&client->dev); |
| if (!input_dev) { |
| dev_err(&client->dev, "failed to allocate input device\n"); |
| return -ENOMEM; |
| } |
| |
| keypad->client = client; |
| keypad->input_dev = input_dev; |
| |
| input_dev->name = client->name; |
| input_dev->id.bustype = BUS_I2C; |
| input_dev->open = max7359_open; |
| input_dev->close = max7359_close; |
| input_dev->dev.parent = &client->dev; |
| |
| input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); |
| input_dev->keycodesize = sizeof(keypad->keycodes[0]); |
| input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); |
| input_dev->keycode = keypad->keycodes; |
| |
| input_set_capability(input_dev, EV_MSC, MSC_SCAN); |
| input_set_drvdata(input_dev, keypad); |
| |
| error = matrix_keypad_build_keymap(keymap_data, NULL, |
| MAX7359_MAX_KEY_ROWS, |
| MAX7359_MAX_KEY_COLS, |
| keypad->keycodes, |
| input_dev); |
| if (error) { |
| dev_err(&client->dev, "failed to build keymap\n"); |
| return error; |
| } |
| |
| error = devm_request_threaded_irq(&client->dev, client->irq, NULL, |
| max7359_interrupt, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| client->name, keypad); |
| if (error) { |
| dev_err(&client->dev, "failed to register interrupt\n"); |
| return error; |
| } |
| |
| /* Register the input device */ |
| error = input_register_device(input_dev); |
| if (error) { |
| dev_err(&client->dev, "failed to register input device\n"); |
| return error; |
| } |
| |
| /* Initialize MAX7359 */ |
| max7359_initialize(client); |
| |
| device_init_wakeup(&client->dev, 1); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int max7359_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| |
| max7359_fall_deepsleep(client); |
| |
| if (device_may_wakeup(&client->dev)) |
| enable_irq_wake(client->irq); |
| |
| return 0; |
| } |
| |
| static int max7359_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| |
| if (device_may_wakeup(&client->dev)) |
| disable_irq_wake(client->irq); |
| |
| /* Restore the default setting */ |
| max7359_take_catnap(client); |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(max7359_pm, max7359_suspend, max7359_resume); |
| |
| static const struct i2c_device_id max7359_ids[] = { |
| { "max7359", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, max7359_ids); |
| |
| static struct i2c_driver max7359_i2c_driver = { |
| .driver = { |
| .name = "max7359", |
| .pm = &max7359_pm, |
| }, |
| .probe = max7359_probe, |
| .id_table = max7359_ids, |
| }; |
| |
| module_i2c_driver(max7359_i2c_driver); |
| |
| MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>"); |
| MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver"); |
| MODULE_LICENSE("GPL v2"); |