| /* | |
| * Copyright(c) 2007 Intel Corporation. All rights reserved. | |
| * Copyright(c) 2008 Red Hat, Inc. All rights reserved. | |
| * Copyright(c) 2008 Mike Christie | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms and conditions of the GNU General Public License, | |
| * version 2, as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along with | |
| * this program; if not, write to the Free Software Foundation, Inc., | |
| * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
| * | |
| * Maintained at www.Open-FCoE.org | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/delay.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/err.h> | |
| #include <linux/crc32.h> | |
| #include <scsi/scsi_tcq.h> | |
| #include <scsi/scsi.h> | |
| #include <scsi/scsi_host.h> | |
| #include <scsi/scsi_device.h> | |
| #include <scsi/scsi_cmnd.h> | |
| #include <scsi/fc/fc_fc2.h> | |
| #include <scsi/libfc.h> | |
| #include <scsi/fc_encode.h> | |
| MODULE_AUTHOR("Open-FCoE.org"); | |
| MODULE_DESCRIPTION("libfc"); | |
| MODULE_LICENSE("GPL v2"); | |
| static int fc_fcp_debug; | |
| #define FC_DEBUG_FCP(fmt...) \ | |
| do { \ | |
| if (fc_fcp_debug) \ | |
| FC_DBG(fmt); \ | |
| } while (0) | |
| static struct kmem_cache *scsi_pkt_cachep; | |
| /* SRB state definitions */ | |
| #define FC_SRB_FREE 0 /* cmd is free */ | |
| #define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */ | |
| #define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */ | |
| #define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */ | |
| #define FC_SRB_ABORTED (1 << 3) /* abort acknowleged */ | |
| #define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */ | |
| #define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */ | |
| #define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */ | |
| #define FC_SRB_NOMEM (1 << 7) /* dropped to out of mem */ | |
| #define FC_SRB_READ (1 << 1) | |
| #define FC_SRB_WRITE (1 << 0) | |
| /* | |
| * The SCp.ptr should be tested and set under the host lock. NULL indicates | |
| * that the command has been retruned to the scsi layer. | |
| */ | |
| #define CMD_SP(Cmnd) ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr) | |
| #define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in) | |
| #define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual) | |
| #define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status) | |
| #define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual) | |
| struct fc_fcp_internal { | |
| mempool_t *scsi_pkt_pool; | |
| struct list_head scsi_pkt_queue; | |
| u8 throttled; | |
| }; | |
| #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv) | |
| /* | |
| * function prototypes | |
| * FC scsi I/O related functions | |
| */ | |
| static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *); | |
| static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *); | |
| static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *); | |
| static void fc_fcp_complete_locked(struct fc_fcp_pkt *); | |
| static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *); | |
| static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp); | |
| static void fc_timeout_error(struct fc_fcp_pkt *); | |
| static void fc_fcp_timeout(unsigned long data); | |
| static void fc_fcp_rec(struct fc_fcp_pkt *); | |
| static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *); | |
| static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *); | |
| static void fc_io_compl(struct fc_fcp_pkt *); | |
| static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32); | |
| static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *); | |
| static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *); | |
| /* | |
| * command status codes | |
| */ | |
| #define FC_COMPLETE 0 | |
| #define FC_CMD_ABORTED 1 | |
| #define FC_CMD_RESET 2 | |
| #define FC_CMD_PLOGO 3 | |
| #define FC_SNS_RCV 4 | |
| #define FC_TRANS_ERR 5 | |
| #define FC_DATA_OVRRUN 6 | |
| #define FC_DATA_UNDRUN 7 | |
| #define FC_ERROR 8 | |
| #define FC_HRD_ERROR 9 | |
| #define FC_CMD_TIME_OUT 10 | |
| /* | |
| * Error recovery timeout values. | |
| */ | |
| #define FC_SCSI_ER_TIMEOUT (10 * HZ) | |
| #define FC_SCSI_TM_TOV (10 * HZ) | |
| #define FC_SCSI_REC_TOV (2 * HZ) | |
| #define FC_HOST_RESET_TIMEOUT (30 * HZ) | |
| #define FC_MAX_ERROR_CNT 5 | |
| #define FC_MAX_RECOV_RETRY 3 | |
| #define FC_FCP_DFLT_QUEUE_DEPTH 32 | |
| /** | |
| * fc_fcp_pkt_alloc - allocation routine for scsi_pkt packet | |
| * @lp: fc lport struct | |
| * @gfp: gfp flags for allocation | |
| * | |
| * This is used by upper layer scsi driver. | |
| * Return Value : scsi_pkt structure or null on allocation failure. | |
| * Context : call from process context. no locking required. | |
| */ | |
| static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lp, gfp_t gfp) | |
| { | |
| struct fc_fcp_internal *si = fc_get_scsi_internal(lp); | |
| struct fc_fcp_pkt *fsp; | |
| fsp = mempool_alloc(si->scsi_pkt_pool, gfp); | |
| if (fsp) { | |
| memset(fsp, 0, sizeof(*fsp)); | |
| fsp->lp = lp; | |
| atomic_set(&fsp->ref_cnt, 1); | |
| init_timer(&fsp->timer); | |
| INIT_LIST_HEAD(&fsp->list); | |
| spin_lock_init(&fsp->scsi_pkt_lock); | |
| } | |
| return fsp; | |
| } | |
| /** | |
| * fc_fcp_pkt_release() - release hold on scsi_pkt packet | |
| * @fsp: fcp packet struct | |
| * | |
| * This is used by upper layer scsi driver. | |
| * Context : call from process and interrupt context. | |
| * no locking required | |
| */ | |
| static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp) | |
| { | |
| if (atomic_dec_and_test(&fsp->ref_cnt)) { | |
| struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp); | |
| mempool_free(fsp, si->scsi_pkt_pool); | |
| } | |
| } | |
| static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp) | |
| { | |
| atomic_inc(&fsp->ref_cnt); | |
| } | |
| /** | |
| * fc_fcp_pkt_destory() - release hold on scsi_pkt packet | |
| * @seq: exchange sequence | |
| * @fsp: fcp packet struct | |
| * | |
| * Release hold on scsi_pkt packet set to keep scsi_pkt | |
| * till EM layer exch resource is not freed. | |
| * Context : called from from EM layer. | |
| * no locking required | |
| */ | |
| static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp) | |
| { | |
| fc_fcp_pkt_release(fsp); | |
| } | |
| /** | |
| * fc_fcp_lock_pkt() - lock a packet and get a ref to it. | |
| * @fsp: fcp packet | |
| * | |
| * We should only return error if we return a command to scsi-ml before | |
| * getting a response. This can happen in cases where we send a abort, but | |
| * do not wait for the response and the abort and command can be passing | |
| * each other on the wire/network-layer. | |
| * | |
| * Note: this function locks the packet and gets a reference to allow | |
| * callers to call the completion function while the lock is held and | |
| * not have to worry about the packets refcount. | |
| * | |
| * TODO: Maybe we should just have callers grab/release the lock and | |
| * have a function that they call to verify the fsp and grab a ref if | |
| * needed. | |
| */ | |
| static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp) | |
| { | |
| spin_lock_bh(&fsp->scsi_pkt_lock); | |
| if (fsp->state & FC_SRB_COMPL) { | |
| spin_unlock_bh(&fsp->scsi_pkt_lock); | |
| return -EPERM; | |
| } | |
| fc_fcp_pkt_hold(fsp); | |
| return 0; | |
| } | |
| static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp) | |
| { | |
| spin_unlock_bh(&fsp->scsi_pkt_lock); | |
| fc_fcp_pkt_release(fsp); | |
| } | |
| static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay) | |
| { | |
| if (!(fsp->state & FC_SRB_COMPL)) | |
| mod_timer(&fsp->timer, jiffies + delay); | |
| } | |
| static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp) | |
| { | |
| if (!fsp->seq_ptr) | |
| return -EINVAL; | |
| fsp->state |= FC_SRB_ABORT_PENDING; | |
| return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0); | |
| } | |
| /* | |
| * Retry command. | |
| * An abort isn't needed. | |
| */ | |
| static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp) | |
| { | |
| if (fsp->seq_ptr) { | |
| fsp->lp->tt.exch_done(fsp->seq_ptr); | |
| fsp->seq_ptr = NULL; | |
| } | |
| fsp->state &= ~FC_SRB_ABORT_PENDING; | |
| fsp->io_status = 0; | |
| fsp->status_code = FC_ERROR; | |
| fc_fcp_complete_locked(fsp); | |
| } | |
| /* | |
| * fc_fcp_ddp_setup - calls to LLD's ddp_setup to set up DDP | |
| * transfer for a read I/O indicated by the fc_fcp_pkt. | |
| * @fsp: ptr to the fc_fcp_pkt | |
| * | |
| * This is called in exch_seq_send() when we have a newly allocated | |
| * exchange with a valid exchange id to setup ddp. | |
| * | |
| * returns: none | |
| */ | |
| void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid) | |
| { | |
| struct fc_lport *lp; | |
| if (!fsp) | |
| return; | |
| lp = fsp->lp; | |
| if ((fsp->req_flags & FC_SRB_READ) && | |
| (lp->lro_enabled) && (lp->tt.ddp_setup)) { | |
| if (lp->tt.ddp_setup(lp, xid, scsi_sglist(fsp->cmd), | |
| scsi_sg_count(fsp->cmd))) | |
| fsp->xfer_ddp = xid; | |
| } | |
| } | |
| EXPORT_SYMBOL(fc_fcp_ddp_setup); | |
| /* | |
| * fc_fcp_ddp_done - calls to LLD's ddp_done to release any | |
| * DDP related resources for this I/O if it is initialized | |
| * as a ddp transfer | |
| * @fsp: ptr to the fc_fcp_pkt | |
| * | |
| * returns: none | |
| */ | |
| static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp) | |
| { | |
| struct fc_lport *lp; | |
| if (!fsp) | |
| return; | |
| lp = fsp->lp; | |
| if (fsp->xfer_ddp && lp->tt.ddp_done) { | |
| fsp->xfer_len = lp->tt.ddp_done(lp, fsp->xfer_ddp); | |
| fsp->xfer_ddp = 0; | |
| } | |
| } | |
| /* | |
| * Receive SCSI data from target. | |
| * Called after receiving solicited data. | |
| */ | |
| static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp) | |
| { | |
| struct scsi_cmnd *sc = fsp->cmd; | |
| struct fc_lport *lp = fsp->lp; | |
| struct fcoe_dev_stats *stats; | |
| struct fc_frame_header *fh; | |
| size_t start_offset; | |
| size_t offset; | |
| u32 crc; | |
| u32 copy_len = 0; | |
| size_t len; | |
| void *buf; | |
| struct scatterlist *sg; | |
| size_t remaining; | |
| fh = fc_frame_header_get(fp); | |
| offset = ntohl(fh->fh_parm_offset); | |
| start_offset = offset; | |
| len = fr_len(fp) - sizeof(*fh); | |
| buf = fc_frame_payload_get(fp, 0); | |
| /* if this I/O is ddped, update xfer len */ | |
| fc_fcp_ddp_done(fsp); | |
| if (offset + len > fsp->data_len) { | |
| /* this should never happen */ | |
| if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) && | |
| fc_frame_crc_check(fp)) | |
| goto crc_err; | |
| FC_DEBUG_FCP("data received past end. len %zx offset %zx " | |
| "data_len %x\n", len, offset, fsp->data_len); | |
| fc_fcp_retry_cmd(fsp); | |
| return; | |
| } | |
| if (offset != fsp->xfer_len) | |
| fsp->state |= FC_SRB_DISCONTIG; | |
| crc = 0; | |
| if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) | |
| crc = crc32(~0, (u8 *) fh, sizeof(*fh)); | |
| sg = scsi_sglist(sc); | |
| remaining = len; | |
| while (remaining > 0 && sg) { | |
| size_t off; | |
| void *page_addr; | |
| size_t sg_bytes; | |
| if (offset >= sg->length) { | |
| offset -= sg->length; | |
| sg = sg_next(sg); | |
| continue; | |
| } | |
| sg_bytes = min(remaining, sg->length - offset); | |
| /* | |
| * The scatterlist item may be bigger than PAGE_SIZE, | |
| * but we are limited to mapping PAGE_SIZE at a time. | |
| */ | |
| off = offset + sg->offset; | |
| sg_bytes = min(sg_bytes, (size_t) | |
| (PAGE_SIZE - (off & ~PAGE_MASK))); | |
| page_addr = kmap_atomic(sg_page(sg) + (off >> PAGE_SHIFT), | |
| KM_SOFTIRQ0); | |
| if (!page_addr) | |
| break; /* XXX panic? */ | |
| if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) | |
| crc = crc32(crc, buf, sg_bytes); | |
| memcpy((char *)page_addr + (off & ~PAGE_MASK), buf, | |
| sg_bytes); | |
| kunmap_atomic(page_addr, KM_SOFTIRQ0); | |
| buf += sg_bytes; | |
| offset += sg_bytes; | |
| remaining -= sg_bytes; | |
| copy_len += sg_bytes; | |
| } | |
| if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) { | |
| buf = fc_frame_payload_get(fp, 0); | |
| if (len % 4) { | |
| crc = crc32(crc, buf + len, 4 - (len % 4)); | |
| len += 4 - (len % 4); | |
| } | |
| if (~crc != le32_to_cpu(fr_crc(fp))) { | |
| crc_err: | |
| stats = fc_lport_get_stats(lp); | |
| stats->ErrorFrames++; | |
| /* FIXME - per cpu count, not total count! */ | |
| if (stats->InvalidCRCCount++ < 5) | |
| printk(KERN_WARNING "CRC error on data frame for port (%6x)\n", | |
| fc_host_port_id(lp->host)); | |
| /* | |
| * Assume the frame is total garbage. | |
| * We may have copied it over the good part | |
| * of the buffer. | |
| * If so, we need to retry the entire operation. | |
| * Otherwise, ignore it. | |
| */ | |
| if (fsp->state & FC_SRB_DISCONTIG) | |
| fc_fcp_retry_cmd(fsp); | |
| return; | |
| } | |
| } | |
| if (fsp->xfer_contig_end == start_offset) | |
| fsp->xfer_contig_end += copy_len; | |
| fsp->xfer_len += copy_len; | |
| /* | |
| * In the very rare event that this data arrived after the response | |
| * and completes the transfer, call the completion handler. | |
| */ | |
| if (unlikely(fsp->state & FC_SRB_RCV_STATUS) && | |
| fsp->xfer_len == fsp->data_len - fsp->scsi_resid) | |
| fc_fcp_complete_locked(fsp); | |
| } | |
| /** | |
| * fc_fcp_send_data() - Send SCSI data to target. | |
| * @fsp: ptr to fc_fcp_pkt | |
| * @sp: ptr to this sequence | |
| * @offset: starting offset for this data request | |
| * @seq_blen: the burst length for this data request | |
| * | |
| * Called after receiving a Transfer Ready data descriptor. | |
| * if LLD is capable of seq offload then send down seq_blen | |
| * size of data in single frame, otherwise send multiple FC | |
| * frames of max FC frame payload supported by target port. | |
| * | |
| * Returns : 0 for success. | |
| */ | |
| static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq, | |
| size_t offset, size_t seq_blen) | |
| { | |
| struct fc_exch *ep; | |
| struct scsi_cmnd *sc; | |
| struct scatterlist *sg; | |
| struct fc_frame *fp = NULL; | |
| struct fc_lport *lp = fsp->lp; | |
| size_t remaining; | |
| size_t t_blen; | |
| size_t tlen; | |
| size_t sg_bytes; | |
| size_t frame_offset, fh_parm_offset; | |
| int error; | |
| void *data = NULL; | |
| void *page_addr; | |
| int using_sg = lp->sg_supp; | |
| u32 f_ctl; | |
| WARN_ON(seq_blen <= 0); | |
| if (unlikely(offset + seq_blen > fsp->data_len)) { | |
| /* this should never happen */ | |
| FC_DEBUG_FCP("xfer-ready past end. seq_blen %zx offset %zx\n", | |
| seq_blen, offset); | |
| fc_fcp_send_abort(fsp); | |
| return 0; | |
| } else if (offset != fsp->xfer_len) { | |
| /* Out of Order Data Request - no problem, but unexpected. */ | |
| FC_DEBUG_FCP("xfer-ready non-contiguous. " | |
| "seq_blen %zx offset %zx\n", seq_blen, offset); | |
| } | |
| /* | |
| * if LLD is capable of seq_offload then set transport | |
| * burst length (t_blen) to seq_blen, otherwise set t_blen | |
| * to max FC frame payload previously set in fsp->max_payload. | |
| */ | |
| t_blen = fsp->max_payload; | |
| if (lp->seq_offload) { | |
| t_blen = min(seq_blen, (size_t)lp->lso_max); | |
| FC_DEBUG_FCP("fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n", | |
| fsp, seq_blen, lp->lso_max, t_blen); | |
| } | |
| WARN_ON(t_blen < FC_MIN_MAX_PAYLOAD); | |
| if (t_blen > 512) | |
| t_blen &= ~(512 - 1); /* round down to block size */ | |
| WARN_ON(t_blen < FC_MIN_MAX_PAYLOAD); /* won't go below 256 */ | |
| sc = fsp->cmd; | |
| remaining = seq_blen; | |
| fh_parm_offset = frame_offset = offset; | |
| tlen = 0; | |
| seq = lp->tt.seq_start_next(seq); | |
| f_ctl = FC_FC_REL_OFF; | |
| WARN_ON(!seq); | |
| /* | |
| * If a get_page()/put_page() will fail, don't use sg lists | |
| * in the fc_frame structure. | |
| * | |
| * The put_page() may be long after the I/O has completed | |
| * in the case of FCoE, since the network driver does it | |
| * via free_skb(). See the test in free_pages_check(). | |
| * | |
| * Test this case with 'dd </dev/zero >/dev/st0 bs=64k'. | |
| */ | |
| if (using_sg) { | |
| for (sg = scsi_sglist(sc); sg; sg = sg_next(sg)) { | |
| if (page_count(sg_page(sg)) == 0 || | |
| (sg_page(sg)->flags & (1 << PG_lru | | |
| 1 << PG_private | | |
| 1 << PG_locked | | |
| 1 << PG_active | | |
| 1 << PG_slab | | |
| 1 << PG_swapcache | | |
| 1 << PG_writeback | | |
| 1 << PG_reserved | | |
| 1 << PG_buddy))) { | |
| using_sg = 0; | |
| break; | |
| } | |
| } | |
| } | |
| sg = scsi_sglist(sc); | |
| while (remaining > 0 && sg) { | |
| if (offset >= sg->length) { | |
| offset -= sg->length; | |
| sg = sg_next(sg); | |
| continue; | |
| } | |
| if (!fp) { | |
| tlen = min(t_blen, remaining); | |
| /* | |
| * TODO. Temporary workaround. fc_seq_send() can't | |
| * handle odd lengths in non-linear skbs. | |
| * This will be the final fragment only. | |
| */ | |
| if (tlen % 4) | |
| using_sg = 0; | |
| if (using_sg) { | |
| fp = _fc_frame_alloc(lp, 0); | |
| if (!fp) | |
| return -ENOMEM; | |
| } else { | |
| fp = fc_frame_alloc(lp, tlen); | |
| if (!fp) | |
| return -ENOMEM; | |
| data = (void *)(fr_hdr(fp)) + | |
| sizeof(struct fc_frame_header); | |
| } | |
| fh_parm_offset = frame_offset; | |
| fr_max_payload(fp) = fsp->max_payload; | |
| } | |
| sg_bytes = min(tlen, sg->length - offset); | |
| if (using_sg) { | |
| WARN_ON(skb_shinfo(fp_skb(fp))->nr_frags > | |
| FC_FRAME_SG_LEN); | |
| get_page(sg_page(sg)); | |
| skb_fill_page_desc(fp_skb(fp), | |
| skb_shinfo(fp_skb(fp))->nr_frags, | |
| sg_page(sg), sg->offset + offset, | |
| sg_bytes); | |
| fp_skb(fp)->data_len += sg_bytes; | |
| fr_len(fp) += sg_bytes; | |
| fp_skb(fp)->truesize += PAGE_SIZE; | |
| } else { | |
| size_t off = offset + sg->offset; | |
| /* | |
| * The scatterlist item may be bigger than PAGE_SIZE, | |
| * but we must not cross pages inside the kmap. | |
| */ | |
| sg_bytes = min(sg_bytes, (size_t) (PAGE_SIZE - | |
| (off & ~PAGE_MASK))); | |
| page_addr = kmap_atomic(sg_page(sg) + | |
| (off >> PAGE_SHIFT), | |
| KM_SOFTIRQ0); | |
| memcpy(data, (char *)page_addr + (off & ~PAGE_MASK), | |
| sg_bytes); | |
| kunmap_atomic(page_addr, KM_SOFTIRQ0); | |
| data += sg_bytes; | |
| } | |
| offset += sg_bytes; | |
| frame_offset += sg_bytes; | |
| tlen -= sg_bytes; | |
| remaining -= sg_bytes; | |
| if (tlen) | |
| continue; | |
| /* | |
| * Send sequence with transfer sequence initiative in case | |
| * this is last FCP frame of the sequence. | |
| */ | |
| if (remaining == 0) | |
| f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ; | |
| ep = fc_seq_exch(seq); | |
| fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid, | |
| FC_TYPE_FCP, f_ctl, fh_parm_offset); | |
| /* | |
| * send fragment using for a sequence. | |
| */ | |
| error = lp->tt.seq_send(lp, seq, fp); | |
| if (error) { | |
| WARN_ON(1); /* send error should be rare */ | |
| fc_fcp_retry_cmd(fsp); | |
| return 0; | |
| } | |
| fp = NULL; | |
| } | |
| fsp->xfer_len += seq_blen; /* premature count? */ | |
| return 0; | |
| } | |
| static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) | |
| { | |
| int ba_done = 1; | |
| struct fc_ba_rjt *brp; | |
| struct fc_frame_header *fh; | |
| fh = fc_frame_header_get(fp); | |
| switch (fh->fh_r_ctl) { | |
| case FC_RCTL_BA_ACC: | |
| break; | |
| case FC_RCTL_BA_RJT: | |
| brp = fc_frame_payload_get(fp, sizeof(*brp)); | |
| if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR) | |
| break; | |
| /* fall thru */ | |
| default: | |
| /* | |
| * we will let the command timeout | |
| * and scsi-ml recover in this case, | |
| * therefore cleared the ba_done flag. | |
| */ | |
| ba_done = 0; | |
| } | |
| if (ba_done) { | |
| fsp->state |= FC_SRB_ABORTED; | |
| fsp->state &= ~FC_SRB_ABORT_PENDING; | |
| if (fsp->wait_for_comp) | |
| complete(&fsp->tm_done); | |
| else | |
| fc_fcp_complete_locked(fsp); | |
| } | |
| } | |
| /** | |
| * fc_fcp_reduce_can_queue() - drop can_queue | |
| * @lp: lport to drop queueing for | |
| * | |
| * If we are getting memory allocation failures, then we may | |
| * be trying to execute too many commands. We let the running | |
| * commands complete or timeout, then try again with a reduced | |
| * can_queue. Eventually we will hit the point where we run | |
| * on all reserved structs. | |
| */ | |
| static void fc_fcp_reduce_can_queue(struct fc_lport *lp) | |
| { | |
| struct fc_fcp_internal *si = fc_get_scsi_internal(lp); | |
| unsigned long flags; | |
| int can_queue; | |
| spin_lock_irqsave(lp->host->host_lock, flags); | |
| if (si->throttled) | |
| goto done; | |
| si->throttled = 1; | |
| can_queue = lp->host->can_queue; | |
| can_queue >>= 1; | |
| if (!can_queue) | |
| can_queue = 1; | |
| lp->host->can_queue = can_queue; | |
| shost_printk(KERN_ERR, lp->host, "Could not allocate frame.\n" | |
| "Reducing can_queue to %d.\n", can_queue); | |
| done: | |
| spin_unlock_irqrestore(lp->host->host_lock, flags); | |
| } | |
| /** | |
| * fc_fcp_recv() - Reveive FCP frames | |
| * @seq: The sequence the frame is on | |
| * @fp: The FC frame | |
| * @arg: The related FCP packet | |
| * | |
| * Return : None | |
| * Context : called from Soft IRQ context | |
| * can not called holding list lock | |
| */ | |
| static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg) | |
| { | |
| struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg; | |
| struct fc_lport *lport = fsp->lp; | |
| struct fc_frame_header *fh; | |
| struct fcp_txrdy *dd; | |
| u8 r_ctl; | |
| int rc = 0; | |
| if (IS_ERR(fp)) | |
| goto errout; | |
| fh = fc_frame_header_get(fp); | |
| r_ctl = fh->fh_r_ctl; | |
| if (!(lport->state & LPORT_ST_READY)) | |
| goto out; | |
| if (fc_fcp_lock_pkt(fsp)) | |
| goto out; | |
| fsp->last_pkt_time = jiffies; | |
| if (fh->fh_type == FC_TYPE_BLS) { | |
| fc_fcp_abts_resp(fsp, fp); | |
| goto unlock; | |
| } | |
| if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING)) | |
| goto unlock; | |
| if (r_ctl == FC_RCTL_DD_DATA_DESC) { | |
| /* | |
| * received XFER RDY from the target | |
| * need to send data to the target | |
| */ | |
| WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED); | |
| dd = fc_frame_payload_get(fp, sizeof(*dd)); | |
| WARN_ON(!dd); | |
| rc = fc_fcp_send_data(fsp, seq, | |
| (size_t) ntohl(dd->ft_data_ro), | |
| (size_t) ntohl(dd->ft_burst_len)); | |
| if (!rc) | |
| seq->rec_data = fsp->xfer_len; | |
| else if (rc == -ENOMEM) | |
| fsp->state |= FC_SRB_NOMEM; | |
| } else if (r_ctl == FC_RCTL_DD_SOL_DATA) { | |
| /* | |
| * received a DATA frame | |
| * next we will copy the data to the system buffer | |
| */ | |
| WARN_ON(fr_len(fp) < sizeof(*fh)); /* len may be 0 */ | |
| fc_fcp_recv_data(fsp, fp); | |
| seq->rec_data = fsp->xfer_contig_end; | |
| } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) { | |
| WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED); | |
| fc_fcp_resp(fsp, fp); | |
| } else { | |
| FC_DBG("unexpected frame. r_ctl %x\n", r_ctl); | |
| } | |
| unlock: | |
| fc_fcp_unlock_pkt(fsp); | |
| out: | |
| fc_frame_free(fp); | |
| errout: | |
| if (IS_ERR(fp)) | |
| fc_fcp_error(fsp, fp); | |
| else if (rc == -ENOMEM) | |
| fc_fcp_reduce_can_queue(lport); | |
| } | |
| static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) | |
| { | |
| struct fc_frame_header *fh; | |
| struct fcp_resp *fc_rp; | |
| struct fcp_resp_ext *rp_ex; | |
| struct fcp_resp_rsp_info *fc_rp_info; | |
| u32 plen; | |
| u32 expected_len; | |
| u32 respl = 0; | |
| u32 snsl = 0; | |
| u8 flags = 0; | |
| plen = fr_len(fp); | |
| fh = (struct fc_frame_header *)fr_hdr(fp); | |
| if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp))) | |
| goto len_err; | |
| plen -= sizeof(*fh); | |
| fc_rp = (struct fcp_resp *)(fh + 1); | |
| fsp->cdb_status = fc_rp->fr_status; | |
| flags = fc_rp->fr_flags; | |
| fsp->scsi_comp_flags = flags; | |
| expected_len = fsp->data_len; | |
| /* if ddp, update xfer len */ | |
| fc_fcp_ddp_done(fsp); | |
| if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) { | |
| rp_ex = (void *)(fc_rp + 1); | |
| if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) { | |
| if (plen < sizeof(*fc_rp) + sizeof(*rp_ex)) | |
| goto len_err; | |
| fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1); | |
| if (flags & FCP_RSP_LEN_VAL) { | |
| respl = ntohl(rp_ex->fr_rsp_len); | |
| if (respl != sizeof(*fc_rp_info)) | |
| goto len_err; | |
| if (fsp->wait_for_comp) { | |
| /* Abuse cdb_status for rsp code */ | |
| fsp->cdb_status = fc_rp_info->rsp_code; | |
| complete(&fsp->tm_done); | |
| /* | |
| * tmfs will not have any scsi cmd so | |
| * exit here | |
| */ | |
| return; | |
| } else | |
| goto err; | |
| } | |
| if (flags & FCP_SNS_LEN_VAL) { | |
| snsl = ntohl(rp_ex->fr_sns_len); | |
| if (snsl > SCSI_SENSE_BUFFERSIZE) | |
| snsl = SCSI_SENSE_BUFFERSIZE; | |
| memcpy(fsp->cmd->sense_buffer, | |
| (char *)fc_rp_info + respl, snsl); | |
| } | |
| } | |
| if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) { | |
| if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid)) | |
| goto len_err; | |
| if (flags & FCP_RESID_UNDER) { | |
| fsp->scsi_resid = ntohl(rp_ex->fr_resid); | |
| /* | |
| * The cmnd->underflow is the minimum number of | |
| * bytes that must be transfered for this | |
| * command. Provided a sense condition is not | |
| * present, make sure the actual amount | |
| * transferred is at least the underflow value | |
| * or fail. | |
| */ | |
| if (!(flags & FCP_SNS_LEN_VAL) && | |
| (fc_rp->fr_status == 0) && | |
| (scsi_bufflen(fsp->cmd) - | |
| fsp->scsi_resid) < fsp->cmd->underflow) | |
| goto err; | |
| expected_len -= fsp->scsi_resid; | |
| } else { | |
| fsp->status_code = FC_ERROR; | |
| } | |
| } | |
| } | |
| fsp->state |= FC_SRB_RCV_STATUS; | |
| /* | |
| * Check for missing or extra data frames. | |
| */ | |
| if (unlikely(fsp->xfer_len != expected_len)) { | |
| if (fsp->xfer_len < expected_len) { | |
| /* | |
| * Some data may be queued locally, | |
| * Wait a at least one jiffy to see if it is delivered. | |
| * If this expires without data, we may do SRR. | |
| */ | |
| fc_fcp_timer_set(fsp, 2); | |
| return; | |
| } | |
| fsp->status_code = FC_DATA_OVRRUN; | |
| FC_DBG("tgt %6x xfer len %zx greater than expected len %x. " | |
| "data len %x\n", | |
| fsp->rport->port_id, | |
| fsp->xfer_len, expected_len, fsp->data_len); | |
| } | |
| fc_fcp_complete_locked(fsp); | |
| return; | |
| len_err: | |
| FC_DBG("short FCP response. flags 0x%x len %u respl %u snsl %u\n", | |
| flags, fr_len(fp), respl, snsl); | |
| err: | |
| fsp->status_code = FC_ERROR; | |
| fc_fcp_complete_locked(fsp); | |
| } | |
| /** | |
| * fc_fcp_complete_locked() - complete processing of a fcp packet | |
| * @fsp: fcp packet | |
| * | |
| * This function may sleep if a timer is pending. The packet lock must be | |
| * held, and the host lock must not be held. | |
| */ | |
| static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp) | |
| { | |
| struct fc_lport *lp = fsp->lp; | |
| struct fc_seq *seq; | |
| struct fc_exch *ep; | |
| u32 f_ctl; | |
| if (fsp->state & FC_SRB_ABORT_PENDING) | |
| return; | |
| if (fsp->state & FC_SRB_ABORTED) { | |
| if (!fsp->status_code) | |
| fsp->status_code = FC_CMD_ABORTED; | |
| } else { | |
| /* | |
| * Test for transport underrun, independent of response | |
| * underrun status. | |
| */ | |
| if (fsp->xfer_len < fsp->data_len && !fsp->io_status && | |
| (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) || | |
| fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) { | |
| fsp->status_code = FC_DATA_UNDRUN; | |
| fsp->io_status = 0; | |
| } | |
| } | |
| seq = fsp->seq_ptr; | |
| if (seq) { | |
| fsp->seq_ptr = NULL; | |
| if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) { | |
| struct fc_frame *conf_frame; | |
| struct fc_seq *csp; | |
| csp = lp->tt.seq_start_next(seq); | |
| conf_frame = fc_frame_alloc(fsp->lp, 0); | |
| if (conf_frame) { | |
| f_ctl = FC_FC_SEQ_INIT; | |
| f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ; | |
| ep = fc_seq_exch(seq); | |
| fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL, | |
| ep->did, ep->sid, | |
| FC_TYPE_FCP, f_ctl, 0); | |
| lp->tt.seq_send(lp, csp, conf_frame); | |
| } | |
| } | |
| lp->tt.exch_done(seq); | |
| } | |
| fc_io_compl(fsp); | |
| } | |
| static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error) | |
| { | |
| struct fc_lport *lp = fsp->lp; | |
| if (fsp->seq_ptr) { | |
| lp->tt.exch_done(fsp->seq_ptr); | |
| fsp->seq_ptr = NULL; | |
| } | |
| fsp->status_code = error; | |
| } | |
| /** | |
| * fc_fcp_cleanup_each_cmd() - Cleanup active commads | |
| * @lp: logical port | |
| * @id: target id | |
| * @lun: lun | |
| * @error: fsp status code | |
| * | |
| * If lun or id is -1, they are ignored. | |
| */ | |
| static void fc_fcp_cleanup_each_cmd(struct fc_lport *lp, unsigned int id, | |
| unsigned int lun, int error) | |
| { | |
| struct fc_fcp_internal *si = fc_get_scsi_internal(lp); | |
| struct fc_fcp_pkt *fsp; | |
| struct scsi_cmnd *sc_cmd; | |
| unsigned long flags; | |
| spin_lock_irqsave(lp->host->host_lock, flags); | |
| restart: | |
| list_for_each_entry(fsp, &si->scsi_pkt_queue, list) { | |
| sc_cmd = fsp->cmd; | |
| if (id != -1 && scmd_id(sc_cmd) != id) | |
| continue; | |
| if (lun != -1 && sc_cmd->device->lun != lun) | |
| continue; | |
| fc_fcp_pkt_hold(fsp); | |
| spin_unlock_irqrestore(lp->host->host_lock, flags); | |
| if (!fc_fcp_lock_pkt(fsp)) { | |
| fc_fcp_cleanup_cmd(fsp, error); | |
| fc_io_compl(fsp); | |
| fc_fcp_unlock_pkt(fsp); | |
| } | |
| fc_fcp_pkt_release(fsp); | |
| spin_lock_irqsave(lp->host->host_lock, flags); | |
| /* | |
| * while we dropped the lock multiple pkts could | |
| * have been released, so we have to start over. | |
| */ | |
| goto restart; | |
| } | |
| spin_unlock_irqrestore(lp->host->host_lock, flags); | |
| } | |
| static void fc_fcp_abort_io(struct fc_lport *lp) | |
| { | |
| fc_fcp_cleanup_each_cmd(lp, -1, -1, FC_HRD_ERROR); | |
| } | |
| /** | |
| * fc_fcp_pkt_send() - send a fcp packet to the lower level. | |
| * @lp: fc lport | |
| * @fsp: fc packet. | |
| * | |
| * This is called by upper layer protocol. | |
| * Return : zero for success and -1 for failure | |
| * Context : called from queuecommand which can be called from process | |
| * or scsi soft irq. | |
| * Locks : called with the host lock and irqs disabled. | |
| */ | |
| static int fc_fcp_pkt_send(struct fc_lport *lp, struct fc_fcp_pkt *fsp) | |
| { | |
| struct fc_fcp_internal *si = fc_get_scsi_internal(lp); | |
| int rc; | |
| fsp->cmd->SCp.ptr = (char *)fsp; | |
| fsp->cdb_cmd.fc_dl = htonl(fsp->data_len); | |
| fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK; | |
| int_to_scsilun(fsp->cmd->device->lun, | |
| (struct scsi_lun *)fsp->cdb_cmd.fc_lun); | |
| memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len); | |
| list_add_tail(&fsp->list, &si->scsi_pkt_queue); | |
| spin_unlock_irq(lp->host->host_lock); | |
| rc = lp->tt.fcp_cmd_send(lp, fsp, fc_fcp_recv); | |
| spin_lock_irq(lp->host->host_lock); | |
| if (rc) | |
| list_del(&fsp->list); | |
| return rc; | |
| } | |
| static int fc_fcp_cmd_send(struct fc_lport *lp, struct fc_fcp_pkt *fsp, | |
| void (*resp)(struct fc_seq *, | |
| struct fc_frame *fp, | |
| void *arg)) | |
| { | |
| struct fc_frame *fp; | |
| struct fc_seq *seq; | |
| struct fc_rport *rport; | |
| struct fc_rport_libfc_priv *rp; | |
| const size_t len = sizeof(fsp->cdb_cmd); | |
| int rc = 0; | |
| if (fc_fcp_lock_pkt(fsp)) | |
| return 0; | |
| fp = fc_frame_alloc(lp, sizeof(fsp->cdb_cmd)); | |
| if (!fp) { | |
| rc = -1; | |
| goto unlock; | |
| } | |
| memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len); | |
| fr_fsp(fp) = fsp; | |
| rport = fsp->rport; | |
| fsp->max_payload = rport->maxframe_size; | |
| rp = rport->dd_data; | |
| fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id, | |
| fc_host_port_id(rp->local_port->host), FC_TYPE_FCP, | |
| FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); | |
| seq = lp->tt.exch_seq_send(lp, fp, resp, fc_fcp_pkt_destroy, fsp, 0); | |
| if (!seq) { | |
| fc_frame_free(fp); | |
| rc = -1; | |
| goto unlock; | |
| } | |
| fsp->last_pkt_time = jiffies; | |
| fsp->seq_ptr = seq; | |
| fc_fcp_pkt_hold(fsp); /* hold for fc_fcp_pkt_destroy */ | |
| setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp); | |
| fc_fcp_timer_set(fsp, | |
| (fsp->tgt_flags & FC_RP_FLAGS_REC_SUPPORTED) ? | |
| FC_SCSI_REC_TOV : FC_SCSI_ER_TIMEOUT); | |
| unlock: | |
| fc_fcp_unlock_pkt(fsp); | |
| return rc; | |
| } | |
| /* | |
| * transport error handler | |
| */ | |
| static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) | |
| { | |
| int error = PTR_ERR(fp); | |
| if (fc_fcp_lock_pkt(fsp)) | |
| return; | |
| switch (error) { | |
| case -FC_EX_CLOSED: | |
| fc_fcp_retry_cmd(fsp); | |
| goto unlock; | |
| default: | |
| FC_DBG("unknown error %ld\n", PTR_ERR(fp)); | |
| } | |
| /* | |
| * clear abort pending, because the lower layer | |
| * decided to force completion. | |
| */ | |
| fsp->state &= ~FC_SRB_ABORT_PENDING; | |
| fsp->status_code = FC_CMD_PLOGO; | |
| fc_fcp_complete_locked(fsp); | |
| unlock: | |
| fc_fcp_unlock_pkt(fsp); | |
| } | |
| /* | |
| * Scsi abort handler- calls to send an abort | |
| * and then wait for abort completion | |
| */ | |
| static int fc_fcp_pkt_abort(struct fc_lport *lp, struct fc_fcp_pkt *fsp) | |
| { | |
| int rc = FAILED; | |
| if (fc_fcp_send_abort(fsp)) | |
| return FAILED; | |
| init_completion(&fsp->tm_done); | |
| fsp->wait_for_comp = 1; | |
| spin_unlock_bh(&fsp->scsi_pkt_lock); | |
| rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV); | |
| spin_lock_bh(&fsp->scsi_pkt_lock); | |
| fsp->wait_for_comp = 0; | |
| if (!rc) { | |
| FC_DBG("target abort cmd failed\n"); | |
| rc = FAILED; | |
| } else if (fsp->state & FC_SRB_ABORTED) { | |
| FC_DBG("target abort cmd passed\n"); | |
| rc = SUCCESS; | |
| fc_fcp_complete_locked(fsp); | |
| } | |
| return rc; | |
| } | |
| /* | |
| * Retry LUN reset after resource allocation failed. | |
| */ | |
| static void fc_lun_reset_send(unsigned long data) | |
| { | |
| struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data; | |
| struct fc_lport *lp = fsp->lp; | |
| if (lp->tt.fcp_cmd_send(lp, fsp, fc_tm_done)) { | |
| if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY) | |
| return; | |
| if (fc_fcp_lock_pkt(fsp)) | |
| return; | |
| setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp); | |
| fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV); | |
| fc_fcp_unlock_pkt(fsp); | |
| } | |
| } | |
| /* | |
| * Scsi device reset handler- send a LUN RESET to the device | |
| * and wait for reset reply | |
| */ | |
| static int fc_lun_reset(struct fc_lport *lp, struct fc_fcp_pkt *fsp, | |
| unsigned int id, unsigned int lun) | |
| { | |
| int rc; | |
| fsp->cdb_cmd.fc_dl = htonl(fsp->data_len); | |
| fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET; | |
| int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun); | |
| fsp->wait_for_comp = 1; | |
| init_completion(&fsp->tm_done); | |
| fc_lun_reset_send((unsigned long)fsp); | |
| /* | |
| * wait for completion of reset | |
| * after that make sure all commands are terminated | |
| */ | |
| rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV); | |
| spin_lock_bh(&fsp->scsi_pkt_lock); | |
| fsp->state |= FC_SRB_COMPL; | |
| spin_unlock_bh(&fsp->scsi_pkt_lock); | |
| del_timer_sync(&fsp->timer); | |
| spin_lock_bh(&fsp->scsi_pkt_lock); | |
| if (fsp->seq_ptr) { | |
| lp->tt.exch_done(fsp->seq_ptr); | |
| fsp->seq_ptr = NULL; | |
| } | |
| fsp->wait_for_comp = 0; | |
| spin_unlock_bh(&fsp->scsi_pkt_lock); | |
| if (!rc) { | |
| FC_DBG("lun reset failed\n"); | |
| return FAILED; | |
| } | |
| /* cdb_status holds the tmf's rsp code */ | |
| if (fsp->cdb_status != FCP_TMF_CMPL) | |
| return FAILED; | |
| FC_DBG("lun reset to lun %u completed\n", lun); | |
| fc_fcp_cleanup_each_cmd(lp, id, lun, FC_CMD_ABORTED); | |
| return SUCCESS; | |
| } | |
| /* | |
| * Task Managment response handler | |
| */ | |
| static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg) | |
| { | |
| struct fc_fcp_pkt *fsp = arg; | |
| struct fc_frame_header *fh; | |
| if (IS_ERR(fp)) { | |
| /* | |
| * If there is an error just let it timeout or wait | |
| * for TMF to be aborted if it timedout. | |
| * | |
| * scsi-eh will escalate for when either happens. | |
| */ | |
| return; | |
| } | |
| if (fc_fcp_lock_pkt(fsp)) | |
| return; | |
| /* | |
| * raced with eh timeout handler. | |
| */ | |
| if (!fsp->seq_ptr || !fsp->wait_for_comp) { | |
| spin_unlock_bh(&fsp->scsi_pkt_lock); | |
| return; | |
| } | |
| fh = fc_frame_header_get(fp); | |
| if (fh->fh_type != FC_TYPE_BLS) | |
| fc_fcp_resp(fsp, fp); | |
| fsp->seq_ptr = NULL; | |
| fsp->lp->tt.exch_done(seq); | |
| fc_frame_free(fp); | |
| fc_fcp_unlock_pkt(fsp); | |
| } | |
| static void fc_fcp_cleanup(struct fc_lport *lp) | |
| { | |
| fc_fcp_cleanup_each_cmd(lp, -1, -1, FC_ERROR); | |
| } | |
| /* | |
| * fc_fcp_timeout: called by OS timer function. | |
| * | |
| * The timer has been inactivated and must be reactivated if desired | |
| * using fc_fcp_timer_set(). | |
| * | |
| * Algorithm: | |
| * | |
| * If REC is supported, just issue it, and return. The REC exchange will | |
| * complete or time out, and recovery can continue at that point. | |
| * | |
| * Otherwise, if the response has been received without all the data, | |
| * it has been ER_TIMEOUT since the response was received. | |
| * | |
| * If the response has not been received, | |
| * we see if data was received recently. If it has been, we continue waiting, | |
| * otherwise, we abort the command. | |
| */ | |
| static void fc_fcp_timeout(unsigned long data) | |
| { | |
| struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data; | |
| struct fc_rport *rport = fsp->rport; | |
| struct fc_rport_libfc_priv *rp = rport->dd_data; | |
| if (fc_fcp_lock_pkt(fsp)) | |
| return; | |
| if (fsp->cdb_cmd.fc_tm_flags) | |
| goto unlock; | |
| fsp->state |= FC_SRB_FCP_PROCESSING_TMO; | |
| if (rp->flags & FC_RP_FLAGS_REC_SUPPORTED) | |
| fc_fcp_rec(fsp); | |
| else if (time_after_eq(fsp->last_pkt_time + (FC_SCSI_ER_TIMEOUT / 2), | |
| jiffies)) | |
| fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT); | |
| else if (fsp->state & FC_SRB_RCV_STATUS) | |
| fc_fcp_complete_locked(fsp); | |
| else | |
| fc_timeout_error(fsp); | |
| fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO; | |
| unlock: | |
| fc_fcp_unlock_pkt(fsp); | |
| } | |
| /* | |
| * Send a REC ELS request | |
| */ | |
| static void fc_fcp_rec(struct fc_fcp_pkt *fsp) | |
| { | |
| struct fc_lport *lp; | |
| struct fc_frame *fp; | |
| struct fc_rport *rport; | |
| struct fc_rport_libfc_priv *rp; | |
| lp = fsp->lp; | |
| rport = fsp->rport; | |
| rp = rport->dd_data; | |
| if (!fsp->seq_ptr || rp->rp_state != RPORT_ST_READY) { | |
| fsp->status_code = FC_HRD_ERROR; | |
| fsp->io_status = 0; | |
| fc_fcp_complete_locked(fsp); | |
| return; | |
| } | |
| fp = fc_frame_alloc(lp, sizeof(struct fc_els_rec)); | |
| if (!fp) | |
| goto retry; | |
| fr_seq(fp) = fsp->seq_ptr; | |
| fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id, | |
| fc_host_port_id(rp->local_port->host), FC_TYPE_ELS, | |
| FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); | |
| if (lp->tt.elsct_send(lp, rport, fp, ELS_REC, fc_fcp_rec_resp, | |
| fsp, jiffies_to_msecs(FC_SCSI_REC_TOV))) { | |
| fc_fcp_pkt_hold(fsp); /* hold while REC outstanding */ | |
| return; | |
| } | |
| fc_frame_free(fp); | |
| retry: | |
| if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) | |
| fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV); | |
| else | |
| fc_timeout_error(fsp); | |
| } | |
| /* | |
| * Receive handler for REC ELS frame | |
| * if it is a reject then let the scsi layer to handle | |
| * the timeout. if it is a LS_ACC then if the io was not completed | |
| * then set the timeout and return otherwise complete the exchange | |
| * and tell the scsi layer to restart the I/O. | |
| */ | |
| static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) | |
| { | |
| struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg; | |
| struct fc_els_rec_acc *recp; | |
| struct fc_els_ls_rjt *rjt; | |
| u32 e_stat; | |
| u8 opcode; | |
| u32 offset; | |
| enum dma_data_direction data_dir; | |
| enum fc_rctl r_ctl; | |
| struct fc_rport_libfc_priv *rp; | |
| if (IS_ERR(fp)) { | |
| fc_fcp_rec_error(fsp, fp); | |
| return; | |
| } | |
| if (fc_fcp_lock_pkt(fsp)) | |
| goto out; | |
| fsp->recov_retry = 0; | |
| opcode = fc_frame_payload_op(fp); | |
| if (opcode == ELS_LS_RJT) { | |
| rjt = fc_frame_payload_get(fp, sizeof(*rjt)); | |
| switch (rjt->er_reason) { | |
| default: | |
| FC_DEBUG_FCP("device %x unexpected REC reject " | |
| "reason %d expl %d\n", | |
| fsp->rport->port_id, rjt->er_reason, | |
| rjt->er_explan); | |
| /* fall through */ | |
| case ELS_RJT_UNSUP: | |
| FC_DEBUG_FCP("device does not support REC\n"); | |
| rp = fsp->rport->dd_data; | |
| /* | |
| * if we do not spport RECs or got some bogus | |
| * reason then resetup timer so we check for | |
| * making progress. | |
| */ | |
| rp->flags &= ~FC_RP_FLAGS_REC_SUPPORTED; | |
| fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT); | |
| break; | |
| case ELS_RJT_LOGIC: | |
| case ELS_RJT_UNAB: | |
| /* | |
| * If no data transfer, the command frame got dropped | |
| * so we just retry. If data was transferred, we | |
| * lost the response but the target has no record, | |
| * so we abort and retry. | |
| */ | |
| if (rjt->er_explan == ELS_EXPL_OXID_RXID && | |
| fsp->xfer_len == 0) { | |
| fc_fcp_retry_cmd(fsp); | |
| break; | |
| } | |
| fc_timeout_error(fsp); | |
| break; | |
| } | |
| } else if (opcode == ELS_LS_ACC) { | |
| if (fsp->state & FC_SRB_ABORTED) | |
| goto unlock_out; | |
| data_dir = fsp->cmd->sc_data_direction; | |
| recp = fc_frame_payload_get(fp, sizeof(*recp)); | |
| offset = ntohl(recp->reca_fc4value); | |
| e_stat = ntohl(recp->reca_e_stat); | |
| if (e_stat & ESB_ST_COMPLETE) { | |
| /* | |
| * The exchange is complete. | |
| * | |
| * For output, we must've lost the response. | |
| * For input, all data must've been sent. | |
| * We lost may have lost the response | |
| * (and a confirmation was requested) and maybe | |
| * some data. | |
| * | |
| * If all data received, send SRR | |
| * asking for response. If partial data received, | |
| * or gaps, SRR requests data at start of gap. | |
| * Recovery via SRR relies on in-order-delivery. | |
| */ | |
| if (data_dir == DMA_TO_DEVICE) { | |
| r_ctl = FC_RCTL_DD_CMD_STATUS; | |
| } else if (fsp->xfer_contig_end == offset) { | |
| r_ctl = FC_RCTL_DD_CMD_STATUS; | |
| } else { | |
| offset = fsp->xfer_contig_end; | |
| r_ctl = FC_RCTL_DD_SOL_DATA; | |
| } | |
| fc_fcp_srr(fsp, r_ctl, offset); | |
| } else if (e_stat & ESB_ST_SEQ_INIT) { | |
| /* | |
| * The remote port has the initiative, so just | |
| * keep waiting for it to complete. | |
| */ | |
| fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV); | |
| } else { | |
| /* | |
| * The exchange is incomplete, we have seq. initiative. | |
| * Lost response with requested confirmation, | |
| * lost confirmation, lost transfer ready or | |
| * lost write data. | |
| * | |
| * For output, if not all data was received, ask | |
| * for transfer ready to be repeated. | |
| * | |
| * If we received or sent all the data, send SRR to | |
| * request response. | |
| * | |
| * If we lost a response, we may have lost some read | |
| * data as well. | |
| */ | |
| r_ctl = FC_RCTL_DD_SOL_DATA; | |
| if (data_dir == DMA_TO_DEVICE) { | |
| r_ctl = FC_RCTL_DD_CMD_STATUS; | |
| if (offset < fsp->data_len) | |
| r_ctl = FC_RCTL_DD_DATA_DESC; | |
| } else if (offset == fsp->xfer_contig_end) { | |
| r_ctl = FC_RCTL_DD_CMD_STATUS; | |
| } else if (fsp->xfer_contig_end < offset) { | |
| offset = fsp->xfer_contig_end; | |
| } | |
| fc_fcp_srr(fsp, r_ctl, offset); | |
| } | |
| } | |
| unlock_out: | |
| fc_fcp_unlock_pkt(fsp); | |
| out: | |
| fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */ | |
| fc_frame_free(fp); | |
| } | |
| /* | |
| * Handle error response or timeout for REC exchange. | |
| */ | |
| static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) | |
| { | |
| int error = PTR_ERR(fp); | |
| if (fc_fcp_lock_pkt(fsp)) | |
| goto out; | |
| switch (error) { | |
| case -FC_EX_CLOSED: | |
| fc_fcp_retry_cmd(fsp); | |
| break; | |
| default: | |
| FC_DBG("REC %p fid %x error unexpected error %d\n", | |
| fsp, fsp->rport->port_id, error); | |
| fsp->status_code = FC_CMD_PLOGO; | |
| /* fall through */ | |
| case -FC_EX_TIMEOUT: | |
| /* | |
| * Assume REC or LS_ACC was lost. | |
| * The exchange manager will have aborted REC, so retry. | |
| */ | |
| FC_DBG("REC fid %x error error %d retry %d/%d\n", | |
| fsp->rport->port_id, error, fsp->recov_retry, | |
| FC_MAX_RECOV_RETRY); | |
| if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) | |
| fc_fcp_rec(fsp); | |
| else | |
| fc_timeout_error(fsp); | |
| break; | |
| } | |
| fc_fcp_unlock_pkt(fsp); | |
| out: | |
| fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */ | |
| } | |
| /* | |
| * Time out error routine: | |
| * abort's the I/O close the exchange and | |
| * send completion notification to scsi layer | |
| */ | |
| static void fc_timeout_error(struct fc_fcp_pkt *fsp) | |
| { | |
| fsp->status_code = FC_CMD_TIME_OUT; | |
| fsp->cdb_status = 0; | |
| fsp->io_status = 0; | |
| /* | |
| * if this fails then we let the scsi command timer fire and | |
| * scsi-ml escalate. | |
| */ | |
| fc_fcp_send_abort(fsp); | |
| } | |
| /* | |
| * Sequence retransmission request. | |
| * This is called after receiving status but insufficient data, or | |
| * when expecting status but the request has timed out. | |
| */ | |
| static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset) | |
| { | |
| struct fc_lport *lp = fsp->lp; | |
| struct fc_rport *rport; | |
| struct fc_rport_libfc_priv *rp; | |
| struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr); | |
| struct fc_seq *seq; | |
| struct fcp_srr *srr; | |
| struct fc_frame *fp; | |
| u8 cdb_op; | |
| rport = fsp->rport; | |
| rp = rport->dd_data; | |
| cdb_op = fsp->cdb_cmd.fc_cdb[0]; | |
| if (!(rp->flags & FC_RP_FLAGS_RETRY) || rp->rp_state != RPORT_ST_READY) | |
| goto retry; /* shouldn't happen */ | |
| fp = fc_frame_alloc(lp, sizeof(*srr)); | |
| if (!fp) | |
| goto retry; | |
| srr = fc_frame_payload_get(fp, sizeof(*srr)); | |
| memset(srr, 0, sizeof(*srr)); | |
| srr->srr_op = ELS_SRR; | |
| srr->srr_ox_id = htons(ep->oxid); | |
| srr->srr_rx_id = htons(ep->rxid); | |
| srr->srr_r_ctl = r_ctl; | |
| srr->srr_rel_off = htonl(offset); | |
| fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id, | |
| fc_host_port_id(rp->local_port->host), FC_TYPE_FCP, | |
| FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); | |
| seq = lp->tt.exch_seq_send(lp, fp, fc_fcp_srr_resp, NULL, | |
| fsp, jiffies_to_msecs(FC_SCSI_REC_TOV)); | |
| if (!seq) { | |
| fc_frame_free(fp); | |
| goto retry; | |
| } | |
| fsp->recov_seq = seq; | |
| fsp->xfer_len = offset; | |
| fsp->xfer_contig_end = offset; | |
| fsp->state &= ~FC_SRB_RCV_STATUS; | |
| fc_fcp_pkt_hold(fsp); /* hold for outstanding SRR */ | |
| return; | |
| retry: | |
| fc_fcp_retry_cmd(fsp); | |
| } | |
| /* | |
| * Handle response from SRR. | |
| */ | |
| static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) | |
| { | |
| struct fc_fcp_pkt *fsp = arg; | |
| struct fc_frame_header *fh; | |
| if (IS_ERR(fp)) { | |
| fc_fcp_srr_error(fsp, fp); | |
| return; | |
| } | |
| if (fc_fcp_lock_pkt(fsp)) | |
| goto out; | |
| fh = fc_frame_header_get(fp); | |
| /* | |
| * BUG? fc_fcp_srr_error calls exch_done which would release | |
| * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT, | |
| * then fc_exch_timeout would be sending an abort. The exch_done | |
| * call by fc_fcp_srr_error would prevent fc_exch.c from seeing | |
| * an abort response though. | |
| */ | |
| if (fh->fh_type == FC_TYPE_BLS) { | |
| fc_fcp_unlock_pkt(fsp); | |
| return; | |
| } | |
| fsp->recov_seq = NULL; | |
| switch (fc_frame_payload_op(fp)) { | |
| case ELS_LS_ACC: | |
| fsp->recov_retry = 0; | |
| fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV); | |
| break; | |
| case ELS_LS_RJT: | |
| default: | |
| fc_timeout_error(fsp); | |
| break; | |
| } | |
| fc_fcp_unlock_pkt(fsp); | |
| fsp->lp->tt.exch_done(seq); | |
| out: | |
| fc_frame_free(fp); | |
| fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */ | |
| } | |
| static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) | |
| { | |
| if (fc_fcp_lock_pkt(fsp)) | |
| goto out; | |
| fsp->lp->tt.exch_done(fsp->recov_seq); | |
| fsp->recov_seq = NULL; | |
| switch (PTR_ERR(fp)) { | |
| case -FC_EX_TIMEOUT: | |
| if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) | |
| fc_fcp_rec(fsp); | |
| else | |
| fc_timeout_error(fsp); | |
| break; | |
| case -FC_EX_CLOSED: /* e.g., link failure */ | |
| /* fall through */ | |
| default: | |
| fc_fcp_retry_cmd(fsp); | |
| break; | |
| } | |
| fc_fcp_unlock_pkt(fsp); | |
| out: | |
| fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */ | |
| } | |
| static inline int fc_fcp_lport_queue_ready(struct fc_lport *lp) | |
| { | |
| /* lock ? */ | |
| return (lp->state == LPORT_ST_READY) && lp->link_up && !lp->qfull; | |
| } | |
| /** | |
| * fc_queuecommand - The queuecommand function of the scsi template | |
| * @cmd: struct scsi_cmnd to be executed | |
| * @done: Callback function to be called when cmd is completed | |
| * | |
| * this is the i/o strategy routine, called by the scsi layer | |
| * this routine is called with holding the host_lock. | |
| */ | |
| int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *)) | |
| { | |
| struct fc_lport *lp; | |
| struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device)); | |
| struct fc_fcp_pkt *fsp; | |
| struct fc_rport_libfc_priv *rp; | |
| int rval; | |
| int rc = 0; | |
| struct fcoe_dev_stats *stats; | |
| lp = shost_priv(sc_cmd->device->host); | |
| rval = fc_remote_port_chkready(rport); | |
| if (rval) { | |
| sc_cmd->result = rval; | |
| done(sc_cmd); | |
| goto out; | |
| } | |
| if (!*(struct fc_remote_port **)rport->dd_data) { | |
| /* | |
| * rport is transitioning from blocked/deleted to | |
| * online | |
| */ | |
| sc_cmd->result = DID_IMM_RETRY << 16; | |
| done(sc_cmd); | |
| goto out; | |
| } | |
| rp = rport->dd_data; | |
| if (!fc_fcp_lport_queue_ready(lp)) { | |
| rc = SCSI_MLQUEUE_HOST_BUSY; | |
| goto out; | |
| } | |
| fsp = fc_fcp_pkt_alloc(lp, GFP_ATOMIC); | |
| if (fsp == NULL) { | |
| rc = SCSI_MLQUEUE_HOST_BUSY; | |
| goto out; | |
| } | |
| /* | |
| * build the libfc request pkt | |
| */ | |
| fsp->cmd = sc_cmd; /* save the cmd */ | |
| fsp->lp = lp; /* save the softc ptr */ | |
| fsp->rport = rport; /* set the remote port ptr */ | |
| sc_cmd->scsi_done = done; | |
| /* | |
| * set up the transfer length | |
| */ | |
| fsp->data_len = scsi_bufflen(sc_cmd); | |
| fsp->xfer_len = 0; | |
| /* | |
| * setup the data direction | |
| */ | |
| stats = fc_lport_get_stats(lp); | |
| if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) { | |
| fsp->req_flags = FC_SRB_READ; | |
| stats->InputRequests++; | |
| stats->InputMegabytes = fsp->data_len; | |
| } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) { | |
| fsp->req_flags = FC_SRB_WRITE; | |
| stats->OutputRequests++; | |
| stats->OutputMegabytes = fsp->data_len; | |
| } else { | |
| fsp->req_flags = 0; | |
| stats->ControlRequests++; | |
| } | |
| fsp->tgt_flags = rp->flags; | |
| init_timer(&fsp->timer); | |
| fsp->timer.data = (unsigned long)fsp; | |
| /* | |
| * send it to the lower layer | |
| * if we get -1 return then put the request in the pending | |
| * queue. | |
| */ | |
| rval = fc_fcp_pkt_send(lp, fsp); | |
| if (rval != 0) { | |
| fsp->state = FC_SRB_FREE; | |
| fc_fcp_pkt_release(fsp); | |
| rc = SCSI_MLQUEUE_HOST_BUSY; | |
| } | |
| out: | |
| return rc; | |
| } | |
| EXPORT_SYMBOL(fc_queuecommand); | |
| /** | |
| * fc_io_compl() - Handle responses for completed commands | |
| * @fsp: scsi packet | |
| * | |
| * Translates a error to a Linux SCSI error. | |
| * | |
| * The fcp packet lock must be held when calling. | |
| */ | |
| static void fc_io_compl(struct fc_fcp_pkt *fsp) | |
| { | |
| struct fc_fcp_internal *si; | |
| struct scsi_cmnd *sc_cmd; | |
| struct fc_lport *lp; | |
| unsigned long flags; | |
| /* release outstanding ddp context */ | |
| fc_fcp_ddp_done(fsp); | |
| fsp->state |= FC_SRB_COMPL; | |
| if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) { | |
| spin_unlock_bh(&fsp->scsi_pkt_lock); | |
| del_timer_sync(&fsp->timer); | |
| spin_lock_bh(&fsp->scsi_pkt_lock); | |
| } | |
| lp = fsp->lp; | |
| si = fc_get_scsi_internal(lp); | |
| spin_lock_irqsave(lp->host->host_lock, flags); | |
| if (!fsp->cmd) { | |
| spin_unlock_irqrestore(lp->host->host_lock, flags); | |
| return; | |
| } | |
| /* | |
| * if a command timed out while we had to try and throttle IO | |
| * and it is now getting cleaned up, then we are about to | |
| * try again so clear the throttled flag incase we get more | |
| * time outs. | |
| */ | |
| if (si->throttled && fsp->state & FC_SRB_NOMEM) | |
| si->throttled = 0; | |
| sc_cmd = fsp->cmd; | |
| fsp->cmd = NULL; | |
| if (!sc_cmd->SCp.ptr) { | |
| spin_unlock_irqrestore(lp->host->host_lock, flags); | |
| return; | |
| } | |
| CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status; | |
| switch (fsp->status_code) { | |
| case FC_COMPLETE: | |
| if (fsp->cdb_status == 0) { | |
| /* | |
| * good I/O status | |
| */ | |
| sc_cmd->result = DID_OK << 16; | |
| if (fsp->scsi_resid) | |
| CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid; | |
| } else if (fsp->cdb_status == QUEUE_FULL) { | |
| struct scsi_device *tmp_sdev; | |
| struct scsi_device *sdev = sc_cmd->device; | |
| shost_for_each_device(tmp_sdev, sdev->host) { | |
| if (tmp_sdev->id != sdev->id) | |
| continue; | |
| if (tmp_sdev->queue_depth > 1) { | |
| scsi_track_queue_full(tmp_sdev, | |
| tmp_sdev-> | |
| queue_depth - 1); | |
| } | |
| } | |
| sc_cmd->result = (DID_OK << 16) | fsp->cdb_status; | |
| } else { | |
| /* | |
| * transport level I/O was ok but scsi | |
| * has non zero status | |
| */ | |
| sc_cmd->result = (DID_OK << 16) | fsp->cdb_status; | |
| } | |
| break; | |
| case FC_ERROR: | |
| sc_cmd->result = DID_ERROR << 16; | |
| break; | |
| case FC_DATA_UNDRUN: | |
| if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) { | |
| /* | |
| * scsi status is good but transport level | |
| * underrun. | |
| */ | |
| sc_cmd->result = DID_OK << 16; | |
| } else { | |
| /* | |
| * scsi got underrun, this is an error | |
| */ | |
| CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid; | |
| sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status; | |
| } | |
| break; | |
| case FC_DATA_OVRRUN: | |
| /* | |
| * overrun is an error | |
| */ | |
| sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status; | |
| break; | |
| case FC_CMD_ABORTED: | |
| sc_cmd->result = (DID_ABORT << 16) | fsp->io_status; | |
| break; | |
| case FC_CMD_TIME_OUT: | |
| sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status; | |
| break; | |
| case FC_CMD_RESET: | |
| sc_cmd->result = (DID_RESET << 16); | |
| break; | |
| case FC_HRD_ERROR: | |
| sc_cmd->result = (DID_NO_CONNECT << 16); | |
| break; | |
| default: | |
| sc_cmd->result = (DID_ERROR << 16); | |
| break; | |
| } | |
| list_del(&fsp->list); | |
| sc_cmd->SCp.ptr = NULL; | |
| sc_cmd->scsi_done(sc_cmd); | |
| spin_unlock_irqrestore(lp->host->host_lock, flags); | |
| /* release ref from initial allocation in queue command */ | |
| fc_fcp_pkt_release(fsp); | |
| } | |
| /** | |
| * fc_fcp_complete() - complete processing of a fcp packet | |
| * @fsp: fcp packet | |
| * | |
| * This function may sleep if a fsp timer is pending. | |
| * The host lock must not be held by caller. | |
| */ | |
| void fc_fcp_complete(struct fc_fcp_pkt *fsp) | |
| { | |
| if (fc_fcp_lock_pkt(fsp)) | |
| return; | |
| fc_fcp_complete_locked(fsp); | |
| fc_fcp_unlock_pkt(fsp); | |
| } | |
| EXPORT_SYMBOL(fc_fcp_complete); | |
| /** | |
| * fc_eh_abort() - Abort a command | |
| * @sc_cmd: scsi command to abort | |
| * | |
| * From scsi host template. | |
| * send ABTS to the target device and wait for the response | |
| * sc_cmd is the pointer to the command to be aborted. | |
| */ | |
| int fc_eh_abort(struct scsi_cmnd *sc_cmd) | |
| { | |
| struct fc_fcp_pkt *fsp; | |
| struct fc_lport *lp; | |
| int rc = FAILED; | |
| unsigned long flags; | |
| lp = shost_priv(sc_cmd->device->host); | |
| if (lp->state != LPORT_ST_READY) | |
| return rc; | |
| else if (!lp->link_up) | |
| return rc; | |
| spin_lock_irqsave(lp->host->host_lock, flags); | |
| fsp = CMD_SP(sc_cmd); | |
| if (!fsp) { | |
| /* command completed while scsi eh was setting up */ | |
| spin_unlock_irqrestore(lp->host->host_lock, flags); | |
| return SUCCESS; | |
| } | |
| /* grab a ref so the fsp and sc_cmd cannot be relased from under us */ | |
| fc_fcp_pkt_hold(fsp); | |
| spin_unlock_irqrestore(lp->host->host_lock, flags); | |
| if (fc_fcp_lock_pkt(fsp)) { | |
| /* completed while we were waiting for timer to be deleted */ | |
| rc = SUCCESS; | |
| goto release_pkt; | |
| } | |
| rc = fc_fcp_pkt_abort(lp, fsp); | |
| fc_fcp_unlock_pkt(fsp); | |
| release_pkt: | |
| fc_fcp_pkt_release(fsp); | |
| return rc; | |
| } | |
| EXPORT_SYMBOL(fc_eh_abort); | |
| /** | |
| * fc_eh_device_reset() Reset a single LUN | |
| * @sc_cmd: scsi command | |
| * | |
| * Set from scsi host template to send tm cmd to the target and wait for the | |
| * response. | |
| */ | |
| int fc_eh_device_reset(struct scsi_cmnd *sc_cmd) | |
| { | |
| struct fc_lport *lp; | |
| struct fc_fcp_pkt *fsp; | |
| struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device)); | |
| int rc = FAILED; | |
| struct fc_rport_libfc_priv *rp; | |
| int rval; | |
| rval = fc_remote_port_chkready(rport); | |
| if (rval) | |
| goto out; | |
| rp = rport->dd_data; | |
| lp = shost_priv(sc_cmd->device->host); | |
| if (lp->state != LPORT_ST_READY) | |
| return rc; | |
| fsp = fc_fcp_pkt_alloc(lp, GFP_NOIO); | |
| if (fsp == NULL) { | |
| FC_DBG("could not allocate scsi_pkt\n"); | |
| sc_cmd->result = DID_NO_CONNECT << 16; | |
| goto out; | |
| } | |
| /* | |
| * Build the libfc request pkt. Do not set the scsi cmnd, because | |
| * the sc passed in is not setup for execution like when sent | |
| * through the queuecommand callout. | |
| */ | |
| fsp->lp = lp; /* save the softc ptr */ | |
| fsp->rport = rport; /* set the remote port ptr */ | |
| /* | |
| * flush outstanding commands | |
| */ | |
| rc = fc_lun_reset(lp, fsp, scmd_id(sc_cmd), sc_cmd->device->lun); | |
| fsp->state = FC_SRB_FREE; | |
| fc_fcp_pkt_release(fsp); | |
| out: | |
| return rc; | |
| } | |
| EXPORT_SYMBOL(fc_eh_device_reset); | |
| /** | |
| * fc_eh_host_reset() - The reset function will reset the ports on the host. | |
| * @sc_cmd: scsi command | |
| */ | |
| int fc_eh_host_reset(struct scsi_cmnd *sc_cmd) | |
| { | |
| struct Scsi_Host *shost = sc_cmd->device->host; | |
| struct fc_lport *lp = shost_priv(shost); | |
| unsigned long wait_tmo; | |
| lp->tt.lport_reset(lp); | |
| wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT; | |
| while (!fc_fcp_lport_queue_ready(lp) && time_before(jiffies, wait_tmo)) | |
| msleep(1000); | |
| if (fc_fcp_lport_queue_ready(lp)) { | |
| shost_printk(KERN_INFO, shost, "Host reset succeeded.\n"); | |
| return SUCCESS; | |
| } else { | |
| shost_printk(KERN_INFO, shost, "Host reset failed. " | |
| "lport not ready.\n"); | |
| return FAILED; | |
| } | |
| } | |
| EXPORT_SYMBOL(fc_eh_host_reset); | |
| /** | |
| * fc_slave_alloc() - configure queue depth | |
| * @sdev: scsi device | |
| * | |
| * Configures queue depth based on host's cmd_per_len. If not set | |
| * then we use the libfc default. | |
| */ | |
| int fc_slave_alloc(struct scsi_device *sdev) | |
| { | |
| struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); | |
| int queue_depth; | |
| if (!rport || fc_remote_port_chkready(rport)) | |
| return -ENXIO; | |
| if (sdev->tagged_supported) { | |
| if (sdev->host->hostt->cmd_per_lun) | |
| queue_depth = sdev->host->hostt->cmd_per_lun; | |
| else | |
| queue_depth = FC_FCP_DFLT_QUEUE_DEPTH; | |
| scsi_activate_tcq(sdev, queue_depth); | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(fc_slave_alloc); | |
| int fc_change_queue_depth(struct scsi_device *sdev, int qdepth) | |
| { | |
| scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); | |
| return sdev->queue_depth; | |
| } | |
| EXPORT_SYMBOL(fc_change_queue_depth); | |
| int fc_change_queue_type(struct scsi_device *sdev, int tag_type) | |
| { | |
| if (sdev->tagged_supported) { | |
| scsi_set_tag_type(sdev, tag_type); | |
| if (tag_type) | |
| scsi_activate_tcq(sdev, sdev->queue_depth); | |
| else | |
| scsi_deactivate_tcq(sdev, sdev->queue_depth); | |
| } else | |
| tag_type = 0; | |
| return tag_type; | |
| } | |
| EXPORT_SYMBOL(fc_change_queue_type); | |
| void fc_fcp_destroy(struct fc_lport *lp) | |
| { | |
| struct fc_fcp_internal *si = fc_get_scsi_internal(lp); | |
| if (!list_empty(&si->scsi_pkt_queue)) | |
| printk(KERN_ERR "Leaked scsi packets.\n"); | |
| mempool_destroy(si->scsi_pkt_pool); | |
| kfree(si); | |
| lp->scsi_priv = NULL; | |
| } | |
| EXPORT_SYMBOL(fc_fcp_destroy); | |
| int fc_fcp_init(struct fc_lport *lp) | |
| { | |
| int rc; | |
| struct fc_fcp_internal *si; | |
| if (!lp->tt.fcp_cmd_send) | |
| lp->tt.fcp_cmd_send = fc_fcp_cmd_send; | |
| if (!lp->tt.fcp_cleanup) | |
| lp->tt.fcp_cleanup = fc_fcp_cleanup; | |
| if (!lp->tt.fcp_abort_io) | |
| lp->tt.fcp_abort_io = fc_fcp_abort_io; | |
| si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL); | |
| if (!si) | |
| return -ENOMEM; | |
| lp->scsi_priv = si; | |
| INIT_LIST_HEAD(&si->scsi_pkt_queue); | |
| si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep); | |
| if (!si->scsi_pkt_pool) { | |
| rc = -ENOMEM; | |
| goto free_internal; | |
| } | |
| return 0; | |
| free_internal: | |
| kfree(si); | |
| return rc; | |
| } | |
| EXPORT_SYMBOL(fc_fcp_init); | |
| static int __init libfc_init(void) | |
| { | |
| int rc; | |
| scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt", | |
| sizeof(struct fc_fcp_pkt), | |
| 0, SLAB_HWCACHE_ALIGN, NULL); | |
| if (scsi_pkt_cachep == NULL) { | |
| FC_DBG("Unable to allocate SRB cache...module load failed!"); | |
| return -ENOMEM; | |
| } | |
| rc = fc_setup_exch_mgr(); | |
| if (rc) | |
| goto destroy_pkt_cache; | |
| rc = fc_setup_rport(); | |
| if (rc) | |
| goto destroy_em; | |
| return rc; | |
| destroy_em: | |
| fc_destroy_exch_mgr(); | |
| destroy_pkt_cache: | |
| kmem_cache_destroy(scsi_pkt_cachep); | |
| return rc; | |
| } | |
| static void __exit libfc_exit(void) | |
| { | |
| kmem_cache_destroy(scsi_pkt_cachep); | |
| fc_destroy_exch_mgr(); | |
| fc_destroy_rport(); | |
| } | |
| module_init(libfc_init); | |
| module_exit(libfc_exit); |