| /* | |
| * Copyright(c) 2007 Intel Corporation. All rights reserved. | |
| * Copyright(c) 2008 Red Hat, Inc. All rights reserved. | |
| * Copyright(c) 2008 Mike Christie | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms and conditions of the GNU General Public License, | |
| * version 2, as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along with | |
| * this program; if not, write to the Free Software Foundation, Inc., | |
| * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
| * | |
| * Maintained at www.Open-FCoE.org | |
| */ | |
| /* | |
| * Fibre Channel exchange and sequence handling. | |
| */ | |
| #include <linux/timer.h> | |
| #include <linux/gfp.h> | |
| #include <linux/err.h> | |
| #include <scsi/fc/fc_fc2.h> | |
| #include <scsi/libfc.h> | |
| #include <scsi/fc_encode.h> | |
| /* | |
| * fc_exch_debug can be set in debugger or at compile time to get more logs. | |
| */ | |
| static int fc_exch_debug; | |
| #define FC_DEBUG_EXCH(fmt...) \ | |
| do { \ | |
| if (fc_exch_debug) \ | |
| FC_DBG(fmt); \ | |
| } while (0) | |
| static struct kmem_cache *fc_em_cachep; /* cache for exchanges */ | |
| /* | |
| * Structure and function definitions for managing Fibre Channel Exchanges | |
| * and Sequences. | |
| * | |
| * The three primary structures used here are fc_exch_mgr, fc_exch, and fc_seq. | |
| * | |
| * fc_exch_mgr holds the exchange state for an N port | |
| * | |
| * fc_exch holds state for one exchange and links to its active sequence. | |
| * | |
| * fc_seq holds the state for an individual sequence. | |
| */ | |
| /* | |
| * Exchange manager. | |
| * | |
| * This structure is the center for creating exchanges and sequences. | |
| * It manages the allocation of exchange IDs. | |
| */ | |
| struct fc_exch_mgr { | |
| enum fc_class class; /* default class for sequences */ | |
| spinlock_t em_lock; /* exchange manager lock, | |
| must be taken before ex_lock */ | |
| u16 last_xid; /* last allocated exchange ID */ | |
| u16 min_xid; /* min exchange ID */ | |
| u16 max_xid; /* max exchange ID */ | |
| u16 max_read; /* max exchange ID for read */ | |
| u16 last_read; /* last xid allocated for read */ | |
| u32 total_exches; /* total allocated exchanges */ | |
| struct list_head ex_list; /* allocated exchanges list */ | |
| struct fc_lport *lp; /* fc device instance */ | |
| mempool_t *ep_pool; /* reserve ep's */ | |
| /* | |
| * currently exchange mgr stats are updated but not used. | |
| * either stats can be expose via sysfs or remove them | |
| * all together if not used XXX | |
| */ | |
| struct { | |
| atomic_t no_free_exch; | |
| atomic_t no_free_exch_xid; | |
| atomic_t xid_not_found; | |
| atomic_t xid_busy; | |
| atomic_t seq_not_found; | |
| atomic_t non_bls_resp; | |
| } stats; | |
| struct fc_exch **exches; /* for exch pointers indexed by xid */ | |
| }; | |
| #define fc_seq_exch(sp) container_of(sp, struct fc_exch, seq) | |
| static void fc_exch_rrq(struct fc_exch *); | |
| static void fc_seq_ls_acc(struct fc_seq *); | |
| static void fc_seq_ls_rjt(struct fc_seq *, enum fc_els_rjt_reason, | |
| enum fc_els_rjt_explan); | |
| static void fc_exch_els_rec(struct fc_seq *, struct fc_frame *); | |
| static void fc_exch_els_rrq(struct fc_seq *, struct fc_frame *); | |
| static struct fc_seq *fc_seq_start_next_locked(struct fc_seq *sp); | |
| /* | |
| * Internal implementation notes. | |
| * | |
| * The exchange manager is one by default in libfc but LLD may choose | |
| * to have one per CPU. The sequence manager is one per exchange manager | |
| * and currently never separated. | |
| * | |
| * Section 9.8 in FC-FS-2 specifies: "The SEQ_ID is a one-byte field | |
| * assigned by the Sequence Initiator that shall be unique for a specific | |
| * D_ID and S_ID pair while the Sequence is open." Note that it isn't | |
| * qualified by exchange ID, which one might think it would be. | |
| * In practice this limits the number of open sequences and exchanges to 256 | |
| * per session. For most targets we could treat this limit as per exchange. | |
| * | |
| * The exchange and its sequence are freed when the last sequence is received. | |
| * It's possible for the remote port to leave an exchange open without | |
| * sending any sequences. | |
| * | |
| * Notes on reference counts: | |
| * | |
| * Exchanges are reference counted and exchange gets freed when the reference | |
| * count becomes zero. | |
| * | |
| * Timeouts: | |
| * Sequences are timed out for E_D_TOV and R_A_TOV. | |
| * | |
| * Sequence event handling: | |
| * | |
| * The following events may occur on initiator sequences: | |
| * | |
| * Send. | |
| * For now, the whole thing is sent. | |
| * Receive ACK | |
| * This applies only to class F. | |
| * The sequence is marked complete. | |
| * ULP completion. | |
| * The upper layer calls fc_exch_done() when done | |
| * with exchange and sequence tuple. | |
| * RX-inferred completion. | |
| * When we receive the next sequence on the same exchange, we can | |
| * retire the previous sequence ID. (XXX not implemented). | |
| * Timeout. | |
| * R_A_TOV frees the sequence ID. If we're waiting for ACK, | |
| * E_D_TOV causes abort and calls upper layer response handler | |
| * with FC_EX_TIMEOUT error. | |
| * Receive RJT | |
| * XXX defer. | |
| * Send ABTS | |
| * On timeout. | |
| * | |
| * The following events may occur on recipient sequences: | |
| * | |
| * Receive | |
| * Allocate sequence for first frame received. | |
| * Hold during receive handler. | |
| * Release when final frame received. | |
| * Keep status of last N of these for the ELS RES command. XXX TBD. | |
| * Receive ABTS | |
| * Deallocate sequence | |
| * Send RJT | |
| * Deallocate | |
| * | |
| * For now, we neglect conditions where only part of a sequence was | |
| * received or transmitted, or where out-of-order receipt is detected. | |
| */ | |
| /* | |
| * Locking notes: | |
| * | |
| * The EM code run in a per-CPU worker thread. | |
| * | |
| * To protect against concurrency between a worker thread code and timers, | |
| * sequence allocation and deallocation must be locked. | |
| * - exchange refcnt can be done atomicly without locks. | |
| * - sequence allocation must be locked by exch lock. | |
| * - If the em_lock and ex_lock must be taken at the same time, then the | |
| * em_lock must be taken before the ex_lock. | |
| */ | |
| /* | |
| * opcode names for debugging. | |
| */ | |
| static char *fc_exch_rctl_names[] = FC_RCTL_NAMES_INIT; | |
| #define FC_TABLE_SIZE(x) (sizeof(x) / sizeof(x[0])) | |
| static inline const char *fc_exch_name_lookup(unsigned int op, char **table, | |
| unsigned int max_index) | |
| { | |
| const char *name = NULL; | |
| if (op < max_index) | |
| name = table[op]; | |
| if (!name) | |
| name = "unknown"; | |
| return name; | |
| } | |
| static const char *fc_exch_rctl_name(unsigned int op) | |
| { | |
| return fc_exch_name_lookup(op, fc_exch_rctl_names, | |
| FC_TABLE_SIZE(fc_exch_rctl_names)); | |
| } | |
| /* | |
| * Hold an exchange - keep it from being freed. | |
| */ | |
| static void fc_exch_hold(struct fc_exch *ep) | |
| { | |
| atomic_inc(&ep->ex_refcnt); | |
| } | |
| /* | |
| * setup fc hdr by initializing few more FC header fields and sof/eof. | |
| * Initialized fields by this func: | |
| * - fh_ox_id, fh_rx_id, fh_seq_id, fh_seq_cnt | |
| * - sof and eof | |
| */ | |
| static void fc_exch_setup_hdr(struct fc_exch *ep, struct fc_frame *fp, | |
| u32 f_ctl) | |
| { | |
| struct fc_frame_header *fh = fc_frame_header_get(fp); | |
| u16 fill; | |
| fr_sof(fp) = ep->class; | |
| if (ep->seq.cnt) | |
| fr_sof(fp) = fc_sof_normal(ep->class); | |
| if (f_ctl & FC_FC_END_SEQ) { | |
| fr_eof(fp) = FC_EOF_T; | |
| if (fc_sof_needs_ack(ep->class)) | |
| fr_eof(fp) = FC_EOF_N; | |
| /* | |
| * Form f_ctl. | |
| * The number of fill bytes to make the length a 4-byte | |
| * multiple is the low order 2-bits of the f_ctl. | |
| * The fill itself will have been cleared by the frame | |
| * allocation. | |
| * After this, the length will be even, as expected by | |
| * the transport. | |
| */ | |
| fill = fr_len(fp) & 3; | |
| if (fill) { | |
| fill = 4 - fill; | |
| /* TODO, this may be a problem with fragmented skb */ | |
| skb_put(fp_skb(fp), fill); | |
| hton24(fh->fh_f_ctl, f_ctl | fill); | |
| } | |
| } else { | |
| WARN_ON(fr_len(fp) % 4 != 0); /* no pad to non last frame */ | |
| fr_eof(fp) = FC_EOF_N; | |
| } | |
| /* | |
| * Initialize remainig fh fields | |
| * from fc_fill_fc_hdr | |
| */ | |
| fh->fh_ox_id = htons(ep->oxid); | |
| fh->fh_rx_id = htons(ep->rxid); | |
| fh->fh_seq_id = ep->seq.id; | |
| fh->fh_seq_cnt = htons(ep->seq.cnt); | |
| } | |
| /* | |
| * Release a reference to an exchange. | |
| * If the refcnt goes to zero and the exchange is complete, it is freed. | |
| */ | |
| static void fc_exch_release(struct fc_exch *ep) | |
| { | |
| struct fc_exch_mgr *mp; | |
| if (atomic_dec_and_test(&ep->ex_refcnt)) { | |
| mp = ep->em; | |
| if (ep->destructor) | |
| ep->destructor(&ep->seq, ep->arg); | |
| if (ep->lp->tt.exch_put) | |
| ep->lp->tt.exch_put(ep->lp, mp, ep->xid); | |
| WARN_ON(!(ep->esb_stat & ESB_ST_COMPLETE)); | |
| mempool_free(ep, mp->ep_pool); | |
| } | |
| } | |
| static int fc_exch_done_locked(struct fc_exch *ep) | |
| { | |
| int rc = 1; | |
| /* | |
| * We must check for completion in case there are two threads | |
| * tyring to complete this. But the rrq code will reuse the | |
| * ep, and in that case we only clear the resp and set it as | |
| * complete, so it can be reused by the timer to send the rrq. | |
| */ | |
| ep->resp = NULL; | |
| if (ep->state & FC_EX_DONE) | |
| return rc; | |
| ep->esb_stat |= ESB_ST_COMPLETE; | |
| if (!(ep->esb_stat & ESB_ST_REC_QUAL)) { | |
| ep->state |= FC_EX_DONE; | |
| if (cancel_delayed_work(&ep->timeout_work)) | |
| atomic_dec(&ep->ex_refcnt); /* drop hold for timer */ | |
| rc = 0; | |
| } | |
| return rc; | |
| } | |
| static void fc_exch_mgr_delete_ep(struct fc_exch *ep) | |
| { | |
| struct fc_exch_mgr *mp; | |
| mp = ep->em; | |
| spin_lock_bh(&mp->em_lock); | |
| WARN_ON(mp->total_exches <= 0); | |
| mp->total_exches--; | |
| mp->exches[ep->xid - mp->min_xid] = NULL; | |
| list_del(&ep->ex_list); | |
| spin_unlock_bh(&mp->em_lock); | |
| fc_exch_release(ep); /* drop hold for exch in mp */ | |
| } | |
| /* | |
| * Internal version of fc_exch_timer_set - used with lock held. | |
| */ | |
| static inline void fc_exch_timer_set_locked(struct fc_exch *ep, | |
| unsigned int timer_msec) | |
| { | |
| if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE)) | |
| return; | |
| FC_DEBUG_EXCH("Exchange (%4x) timed out, notifying the upper layer\n", | |
| ep->xid); | |
| if (schedule_delayed_work(&ep->timeout_work, | |
| msecs_to_jiffies(timer_msec))) | |
| fc_exch_hold(ep); /* hold for timer */ | |
| } | |
| /* | |
| * Set timer for an exchange. | |
| * The time is a minimum delay in milliseconds until the timer fires. | |
| * Used for upper level protocols to time out the exchange. | |
| * The timer is cancelled when it fires or when the exchange completes. | |
| * Returns non-zero if a timer couldn't be allocated. | |
| */ | |
| static void fc_exch_timer_set(struct fc_exch *ep, unsigned int timer_msec) | |
| { | |
| spin_lock_bh(&ep->ex_lock); | |
| fc_exch_timer_set_locked(ep, timer_msec); | |
| spin_unlock_bh(&ep->ex_lock); | |
| } | |
| int fc_seq_exch_abort(const struct fc_seq *req_sp, unsigned int timer_msec) | |
| { | |
| struct fc_seq *sp; | |
| struct fc_exch *ep; | |
| struct fc_frame *fp; | |
| int error; | |
| ep = fc_seq_exch(req_sp); | |
| spin_lock_bh(&ep->ex_lock); | |
| if (ep->esb_stat & (ESB_ST_COMPLETE | ESB_ST_ABNORMAL) || | |
| ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) { | |
| spin_unlock_bh(&ep->ex_lock); | |
| return -ENXIO; | |
| } | |
| /* | |
| * Send the abort on a new sequence if possible. | |
| */ | |
| sp = fc_seq_start_next_locked(&ep->seq); | |
| if (!sp) { | |
| spin_unlock_bh(&ep->ex_lock); | |
| return -ENOMEM; | |
| } | |
| ep->esb_stat |= ESB_ST_SEQ_INIT | ESB_ST_ABNORMAL; | |
| if (timer_msec) | |
| fc_exch_timer_set_locked(ep, timer_msec); | |
| spin_unlock_bh(&ep->ex_lock); | |
| /* | |
| * If not logged into the fabric, don't send ABTS but leave | |
| * sequence active until next timeout. | |
| */ | |
| if (!ep->sid) | |
| return 0; | |
| /* | |
| * Send an abort for the sequence that timed out. | |
| */ | |
| fp = fc_frame_alloc(ep->lp, 0); | |
| if (fp) { | |
| fc_fill_fc_hdr(fp, FC_RCTL_BA_ABTS, ep->did, ep->sid, | |
| FC_TYPE_BLS, FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); | |
| error = fc_seq_send(ep->lp, sp, fp); | |
| } else | |
| error = -ENOBUFS; | |
| return error; | |
| } | |
| EXPORT_SYMBOL(fc_seq_exch_abort); | |
| /* | |
| * Exchange timeout - handle exchange timer expiration. | |
| * The timer will have been cancelled before this is called. | |
| */ | |
| static void fc_exch_timeout(struct work_struct *work) | |
| { | |
| struct fc_exch *ep = container_of(work, struct fc_exch, | |
| timeout_work.work); | |
| struct fc_seq *sp = &ep->seq; | |
| void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg); | |
| void *arg; | |
| u32 e_stat; | |
| int rc = 1; | |
| spin_lock_bh(&ep->ex_lock); | |
| if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE)) | |
| goto unlock; | |
| e_stat = ep->esb_stat; | |
| if (e_stat & ESB_ST_COMPLETE) { | |
| ep->esb_stat = e_stat & ~ESB_ST_REC_QUAL; | |
| if (e_stat & ESB_ST_REC_QUAL) | |
| fc_exch_rrq(ep); | |
| spin_unlock_bh(&ep->ex_lock); | |
| goto done; | |
| } else { | |
| resp = ep->resp; | |
| arg = ep->arg; | |
| ep->resp = NULL; | |
| if (e_stat & ESB_ST_ABNORMAL) | |
| rc = fc_exch_done_locked(ep); | |
| spin_unlock_bh(&ep->ex_lock); | |
| if (!rc) | |
| fc_exch_mgr_delete_ep(ep); | |
| if (resp) | |
| resp(sp, ERR_PTR(-FC_EX_TIMEOUT), arg); | |
| fc_seq_exch_abort(sp, 2 * ep->r_a_tov); | |
| goto done; | |
| } | |
| unlock: | |
| spin_unlock_bh(&ep->ex_lock); | |
| done: | |
| /* | |
| * This release matches the hold taken when the timer was set. | |
| */ | |
| fc_exch_release(ep); | |
| } | |
| /* | |
| * Allocate a sequence. | |
| * | |
| * We don't support multiple originated sequences on the same exchange. | |
| * By implication, any previously originated sequence on this exchange | |
| * is complete, and we reallocate the same sequence. | |
| */ | |
| static struct fc_seq *fc_seq_alloc(struct fc_exch *ep, u8 seq_id) | |
| { | |
| struct fc_seq *sp; | |
| sp = &ep->seq; | |
| sp->ssb_stat = 0; | |
| sp->cnt = 0; | |
| sp->id = seq_id; | |
| return sp; | |
| } | |
| /* | |
| * fc_em_alloc_xid - returns an xid based on request type | |
| * @lp : ptr to associated lport | |
| * @fp : ptr to the assocated frame | |
| * | |
| * check the associated fc_fsp_pkt to get scsi command type and | |
| * command direction to decide from which range this exch id | |
| * will be allocated from. | |
| * | |
| * Returns : 0 or an valid xid | |
| */ | |
| static u16 fc_em_alloc_xid(struct fc_exch_mgr *mp, const struct fc_frame *fp) | |
| { | |
| u16 xid, min, max; | |
| u16 *plast; | |
| struct fc_exch *ep = NULL; | |
| if (mp->max_read) { | |
| if (fc_fcp_is_read(fr_fsp(fp))) { | |
| min = mp->min_xid; | |
| max = mp->max_read; | |
| plast = &mp->last_read; | |
| } else { | |
| min = mp->max_read + 1; | |
| max = mp->max_xid; | |
| plast = &mp->last_xid; | |
| } | |
| } else { | |
| min = mp->min_xid; | |
| max = mp->max_xid; | |
| plast = &mp->last_xid; | |
| } | |
| xid = *plast; | |
| do { | |
| xid = (xid == max) ? min : xid + 1; | |
| ep = mp->exches[xid - mp->min_xid]; | |
| } while ((ep != NULL) && (xid != *plast)); | |
| if (unlikely(ep)) | |
| xid = 0; | |
| else | |
| *plast = xid; | |
| return xid; | |
| } | |
| /* | |
| * fc_exch_alloc - allocate an exchange. | |
| * @mp : ptr to the exchange manager | |
| * @xid: input xid | |
| * | |
| * if xid is supplied zero then assign next free exchange ID | |
| * from exchange manager, otherwise use supplied xid. | |
| * Returns with exch lock held. | |
| */ | |
| struct fc_exch *fc_exch_alloc(struct fc_exch_mgr *mp, | |
| struct fc_frame *fp, u16 xid) | |
| { | |
| struct fc_exch *ep; | |
| /* allocate memory for exchange */ | |
| ep = mempool_alloc(mp->ep_pool, GFP_ATOMIC); | |
| if (!ep) { | |
| atomic_inc(&mp->stats.no_free_exch); | |
| goto out; | |
| } | |
| memset(ep, 0, sizeof(*ep)); | |
| spin_lock_bh(&mp->em_lock); | |
| /* alloc xid if input xid 0 */ | |
| if (!xid) { | |
| /* alloc a new xid */ | |
| xid = fc_em_alloc_xid(mp, fp); | |
| if (!xid) { | |
| printk(KERN_ERR "fc_em_alloc_xid() failed\n"); | |
| goto err; | |
| } | |
| } | |
| fc_exch_hold(ep); /* hold for exch in mp */ | |
| spin_lock_init(&ep->ex_lock); | |
| /* | |
| * Hold exch lock for caller to prevent fc_exch_reset() | |
| * from releasing exch while fc_exch_alloc() caller is | |
| * still working on exch. | |
| */ | |
| spin_lock_bh(&ep->ex_lock); | |
| mp->exches[xid - mp->min_xid] = ep; | |
| list_add_tail(&ep->ex_list, &mp->ex_list); | |
| fc_seq_alloc(ep, ep->seq_id++); | |
| mp->total_exches++; | |
| spin_unlock_bh(&mp->em_lock); | |
| /* | |
| * update exchange | |
| */ | |
| ep->oxid = ep->xid = xid; | |
| ep->em = mp; | |
| ep->lp = mp->lp; | |
| ep->f_ctl = FC_FC_FIRST_SEQ; /* next seq is first seq */ | |
| ep->rxid = FC_XID_UNKNOWN; | |
| ep->class = mp->class; | |
| INIT_DELAYED_WORK(&ep->timeout_work, fc_exch_timeout); | |
| out: | |
| return ep; | |
| err: | |
| spin_unlock_bh(&mp->em_lock); | |
| atomic_inc(&mp->stats.no_free_exch_xid); | |
| mempool_free(ep, mp->ep_pool); | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(fc_exch_alloc); | |
| /* | |
| * Lookup and hold an exchange. | |
| */ | |
| static struct fc_exch *fc_exch_find(struct fc_exch_mgr *mp, u16 xid) | |
| { | |
| struct fc_exch *ep = NULL; | |
| if ((xid >= mp->min_xid) && (xid <= mp->max_xid)) { | |
| spin_lock_bh(&mp->em_lock); | |
| ep = mp->exches[xid - mp->min_xid]; | |
| if (ep) { | |
| fc_exch_hold(ep); | |
| WARN_ON(ep->xid != xid); | |
| } | |
| spin_unlock_bh(&mp->em_lock); | |
| } | |
| return ep; | |
| } | |
| void fc_exch_done(struct fc_seq *sp) | |
| { | |
| struct fc_exch *ep = fc_seq_exch(sp); | |
| int rc; | |
| spin_lock_bh(&ep->ex_lock); | |
| rc = fc_exch_done_locked(ep); | |
| spin_unlock_bh(&ep->ex_lock); | |
| if (!rc) | |
| fc_exch_mgr_delete_ep(ep); | |
| } | |
| EXPORT_SYMBOL(fc_exch_done); | |
| /* | |
| * Allocate a new exchange as responder. | |
| * Sets the responder ID in the frame header. | |
| */ | |
| static struct fc_exch *fc_exch_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) | |
| { | |
| struct fc_exch *ep; | |
| struct fc_frame_header *fh; | |
| ep = mp->lp->tt.exch_get(mp->lp, fp); | |
| if (ep) { | |
| ep->class = fc_frame_class(fp); | |
| /* | |
| * Set EX_CTX indicating we're responding on this exchange. | |
| */ | |
| ep->f_ctl |= FC_FC_EX_CTX; /* we're responding */ | |
| ep->f_ctl &= ~FC_FC_FIRST_SEQ; /* not new */ | |
| fh = fc_frame_header_get(fp); | |
| ep->sid = ntoh24(fh->fh_d_id); | |
| ep->did = ntoh24(fh->fh_s_id); | |
| ep->oid = ep->did; | |
| /* | |
| * Allocated exchange has placed the XID in the | |
| * originator field. Move it to the responder field, | |
| * and set the originator XID from the frame. | |
| */ | |
| ep->rxid = ep->xid; | |
| ep->oxid = ntohs(fh->fh_ox_id); | |
| ep->esb_stat |= ESB_ST_RESP | ESB_ST_SEQ_INIT; | |
| if ((ntoh24(fh->fh_f_ctl) & FC_FC_SEQ_INIT) == 0) | |
| ep->esb_stat &= ~ESB_ST_SEQ_INIT; | |
| fc_exch_hold(ep); /* hold for caller */ | |
| spin_unlock_bh(&ep->ex_lock); /* lock from exch_get */ | |
| } | |
| return ep; | |
| } | |
| /* | |
| * Find a sequence for receive where the other end is originating the sequence. | |
| * If fc_pf_rjt_reason is FC_RJT_NONE then this function will have a hold | |
| * on the ep that should be released by the caller. | |
| */ | |
| static enum fc_pf_rjt_reason fc_seq_lookup_recip(struct fc_exch_mgr *mp, | |
| struct fc_frame *fp) | |
| { | |
| struct fc_frame_header *fh = fc_frame_header_get(fp); | |
| struct fc_exch *ep = NULL; | |
| struct fc_seq *sp = NULL; | |
| enum fc_pf_rjt_reason reject = FC_RJT_NONE; | |
| u32 f_ctl; | |
| u16 xid; | |
| f_ctl = ntoh24(fh->fh_f_ctl); | |
| WARN_ON((f_ctl & FC_FC_SEQ_CTX) != 0); | |
| /* | |
| * Lookup or create the exchange if we will be creating the sequence. | |
| */ | |
| if (f_ctl & FC_FC_EX_CTX) { | |
| xid = ntohs(fh->fh_ox_id); /* we originated exch */ | |
| ep = fc_exch_find(mp, xid); | |
| if (!ep) { | |
| atomic_inc(&mp->stats.xid_not_found); | |
| reject = FC_RJT_OX_ID; | |
| goto out; | |
| } | |
| if (ep->rxid == FC_XID_UNKNOWN) | |
| ep->rxid = ntohs(fh->fh_rx_id); | |
| else if (ep->rxid != ntohs(fh->fh_rx_id)) { | |
| reject = FC_RJT_OX_ID; | |
| goto rel; | |
| } | |
| } else { | |
| xid = ntohs(fh->fh_rx_id); /* we are the responder */ | |
| /* | |
| * Special case for MDS issuing an ELS TEST with a | |
| * bad rxid of 0. | |
| * XXX take this out once we do the proper reject. | |
| */ | |
| if (xid == 0 && fh->fh_r_ctl == FC_RCTL_ELS_REQ && | |
| fc_frame_payload_op(fp) == ELS_TEST) { | |
| fh->fh_rx_id = htons(FC_XID_UNKNOWN); | |
| xid = FC_XID_UNKNOWN; | |
| } | |
| /* | |
| * new sequence - find the exchange | |
| */ | |
| ep = fc_exch_find(mp, xid); | |
| if ((f_ctl & FC_FC_FIRST_SEQ) && fc_sof_is_init(fr_sof(fp))) { | |
| if (ep) { | |
| atomic_inc(&mp->stats.xid_busy); | |
| reject = FC_RJT_RX_ID; | |
| goto rel; | |
| } | |
| ep = fc_exch_resp(mp, fp); | |
| if (!ep) { | |
| reject = FC_RJT_EXCH_EST; /* XXX */ | |
| goto out; | |
| } | |
| xid = ep->xid; /* get our XID */ | |
| } else if (!ep) { | |
| atomic_inc(&mp->stats.xid_not_found); | |
| reject = FC_RJT_RX_ID; /* XID not found */ | |
| goto out; | |
| } | |
| } | |
| /* | |
| * At this point, we have the exchange held. | |
| * Find or create the sequence. | |
| */ | |
| if (fc_sof_is_init(fr_sof(fp))) { | |
| sp = fc_seq_start_next(&ep->seq); | |
| if (!sp) { | |
| reject = FC_RJT_SEQ_XS; /* exchange shortage */ | |
| goto rel; | |
| } | |
| sp->id = fh->fh_seq_id; | |
| sp->ssb_stat |= SSB_ST_RESP; | |
| } else { | |
| sp = &ep->seq; | |
| if (sp->id != fh->fh_seq_id) { | |
| atomic_inc(&mp->stats.seq_not_found); | |
| reject = FC_RJT_SEQ_ID; /* sequence/exch should exist */ | |
| goto rel; | |
| } | |
| } | |
| WARN_ON(ep != fc_seq_exch(sp)); | |
| if (f_ctl & FC_FC_SEQ_INIT) | |
| ep->esb_stat |= ESB_ST_SEQ_INIT; | |
| fr_seq(fp) = sp; | |
| out: | |
| return reject; | |
| rel: | |
| fc_exch_done(&ep->seq); | |
| fc_exch_release(ep); /* hold from fc_exch_find/fc_exch_resp */ | |
| return reject; | |
| } | |
| /* | |
| * Find the sequence for a frame being received. | |
| * We originated the sequence, so it should be found. | |
| * We may or may not have originated the exchange. | |
| * Does not hold the sequence for the caller. | |
| */ | |
| static struct fc_seq *fc_seq_lookup_orig(struct fc_exch_mgr *mp, | |
| struct fc_frame *fp) | |
| { | |
| struct fc_frame_header *fh = fc_frame_header_get(fp); | |
| struct fc_exch *ep; | |
| struct fc_seq *sp = NULL; | |
| u32 f_ctl; | |
| u16 xid; | |
| f_ctl = ntoh24(fh->fh_f_ctl); | |
| WARN_ON((f_ctl & FC_FC_SEQ_CTX) != FC_FC_SEQ_CTX); | |
| xid = ntohs((f_ctl & FC_FC_EX_CTX) ? fh->fh_ox_id : fh->fh_rx_id); | |
| ep = fc_exch_find(mp, xid); | |
| if (!ep) | |
| return NULL; | |
| if (ep->seq.id == fh->fh_seq_id) { | |
| /* | |
| * Save the RX_ID if we didn't previously know it. | |
| */ | |
| sp = &ep->seq; | |
| if ((f_ctl & FC_FC_EX_CTX) != 0 && | |
| ep->rxid == FC_XID_UNKNOWN) { | |
| ep->rxid = ntohs(fh->fh_rx_id); | |
| } | |
| } | |
| fc_exch_release(ep); | |
| return sp; | |
| } | |
| /* | |
| * Set addresses for an exchange. | |
| * Note this must be done before the first sequence of the exchange is sent. | |
| */ | |
| static void fc_exch_set_addr(struct fc_exch *ep, | |
| u32 orig_id, u32 resp_id) | |
| { | |
| ep->oid = orig_id; | |
| if (ep->esb_stat & ESB_ST_RESP) { | |
| ep->sid = resp_id; | |
| ep->did = orig_id; | |
| } else { | |
| ep->sid = orig_id; | |
| ep->did = resp_id; | |
| } | |
| } | |
| static struct fc_seq *fc_seq_start_next_locked(struct fc_seq *sp) | |
| { | |
| struct fc_exch *ep = fc_seq_exch(sp); | |
| sp = fc_seq_alloc(ep, ep->seq_id++); | |
| FC_DEBUG_EXCH("exch %4x f_ctl %6x seq %2x\n", | |
| ep->xid, ep->f_ctl, sp->id); | |
| return sp; | |
| } | |
| /* | |
| * Allocate a new sequence on the same exchange as the supplied sequence. | |
| * This will never return NULL. | |
| */ | |
| struct fc_seq *fc_seq_start_next(struct fc_seq *sp) | |
| { | |
| struct fc_exch *ep = fc_seq_exch(sp); | |
| spin_lock_bh(&ep->ex_lock); | |
| WARN_ON((ep->esb_stat & ESB_ST_COMPLETE) != 0); | |
| sp = fc_seq_start_next_locked(sp); | |
| spin_unlock_bh(&ep->ex_lock); | |
| return sp; | |
| } | |
| EXPORT_SYMBOL(fc_seq_start_next); | |
| int fc_seq_send(struct fc_lport *lp, struct fc_seq *sp, struct fc_frame *fp) | |
| { | |
| struct fc_exch *ep; | |
| struct fc_frame_header *fh = fc_frame_header_get(fp); | |
| int error; | |
| u32 f_ctl; | |
| ep = fc_seq_exch(sp); | |
| WARN_ON((ep->esb_stat & ESB_ST_SEQ_INIT) != ESB_ST_SEQ_INIT); | |
| f_ctl = ntoh24(fh->fh_f_ctl); | |
| fc_exch_setup_hdr(ep, fp, f_ctl); | |
| /* | |
| * update sequence count if this frame is carrying | |
| * multiple FC frames when sequence offload is enabled | |
| * by LLD. | |
| */ | |
| if (fr_max_payload(fp)) | |
| sp->cnt += DIV_ROUND_UP((fr_len(fp) - sizeof(*fh)), | |
| fr_max_payload(fp)); | |
| else | |
| sp->cnt++; | |
| /* | |
| * Send the frame. | |
| */ | |
| error = lp->tt.frame_send(lp, fp); | |
| /* | |
| * Update the exchange and sequence flags, | |
| * assuming all frames for the sequence have been sent. | |
| * We can only be called to send once for each sequence. | |
| */ | |
| spin_lock_bh(&ep->ex_lock); | |
| ep->f_ctl = f_ctl & ~FC_FC_FIRST_SEQ; /* not first seq */ | |
| if (f_ctl & (FC_FC_END_SEQ | FC_FC_SEQ_INIT)) | |
| ep->esb_stat &= ~ESB_ST_SEQ_INIT; | |
| spin_unlock_bh(&ep->ex_lock); | |
| return error; | |
| } | |
| EXPORT_SYMBOL(fc_seq_send); | |
| void fc_seq_els_rsp_send(struct fc_seq *sp, enum fc_els_cmd els_cmd, | |
| struct fc_seq_els_data *els_data) | |
| { | |
| switch (els_cmd) { | |
| case ELS_LS_RJT: | |
| fc_seq_ls_rjt(sp, els_data->reason, els_data->explan); | |
| break; | |
| case ELS_LS_ACC: | |
| fc_seq_ls_acc(sp); | |
| break; | |
| case ELS_RRQ: | |
| fc_exch_els_rrq(sp, els_data->fp); | |
| break; | |
| case ELS_REC: | |
| fc_exch_els_rec(sp, els_data->fp); | |
| break; | |
| default: | |
| FC_DBG("Invalid ELS CMD:%x\n", els_cmd); | |
| } | |
| } | |
| EXPORT_SYMBOL(fc_seq_els_rsp_send); | |
| /* | |
| * Send a sequence, which is also the last sequence in the exchange. | |
| */ | |
| static void fc_seq_send_last(struct fc_seq *sp, struct fc_frame *fp, | |
| enum fc_rctl rctl, enum fc_fh_type fh_type) | |
| { | |
| u32 f_ctl; | |
| struct fc_exch *ep = fc_seq_exch(sp); | |
| f_ctl = FC_FC_LAST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT; | |
| f_ctl |= ep->f_ctl; | |
| fc_fill_fc_hdr(fp, rctl, ep->did, ep->sid, fh_type, f_ctl, 0); | |
| fc_seq_send(ep->lp, sp, fp); | |
| } | |
| /* | |
| * Send ACK_1 (or equiv.) indicating we received something. | |
| * The frame we're acking is supplied. | |
| */ | |
| static void fc_seq_send_ack(struct fc_seq *sp, const struct fc_frame *rx_fp) | |
| { | |
| struct fc_frame *fp; | |
| struct fc_frame_header *rx_fh; | |
| struct fc_frame_header *fh; | |
| struct fc_exch *ep = fc_seq_exch(sp); | |
| struct fc_lport *lp = ep->lp; | |
| unsigned int f_ctl; | |
| /* | |
| * Don't send ACKs for class 3. | |
| */ | |
| if (fc_sof_needs_ack(fr_sof(rx_fp))) { | |
| fp = fc_frame_alloc(lp, 0); | |
| if (!fp) | |
| return; | |
| fh = fc_frame_header_get(fp); | |
| fh->fh_r_ctl = FC_RCTL_ACK_1; | |
| fh->fh_type = FC_TYPE_BLS; | |
| /* | |
| * Form f_ctl by inverting EX_CTX and SEQ_CTX (bits 23, 22). | |
| * Echo FIRST_SEQ, LAST_SEQ, END_SEQ, END_CONN, SEQ_INIT. | |
| * Bits 9-8 are meaningful (retransmitted or unidirectional). | |
| * Last ACK uses bits 7-6 (continue sequence), | |
| * bits 5-4 are meaningful (what kind of ACK to use). | |
| */ | |
| rx_fh = fc_frame_header_get(rx_fp); | |
| f_ctl = ntoh24(rx_fh->fh_f_ctl); | |
| f_ctl &= FC_FC_EX_CTX | FC_FC_SEQ_CTX | | |
| FC_FC_FIRST_SEQ | FC_FC_LAST_SEQ | | |
| FC_FC_END_SEQ | FC_FC_END_CONN | FC_FC_SEQ_INIT | | |
| FC_FC_RETX_SEQ | FC_FC_UNI_TX; | |
| f_ctl ^= FC_FC_EX_CTX | FC_FC_SEQ_CTX; | |
| hton24(fh->fh_f_ctl, f_ctl); | |
| fc_exch_setup_hdr(ep, fp, f_ctl); | |
| fh->fh_seq_id = rx_fh->fh_seq_id; | |
| fh->fh_seq_cnt = rx_fh->fh_seq_cnt; | |
| fh->fh_parm_offset = htonl(1); /* ack single frame */ | |
| fr_sof(fp) = fr_sof(rx_fp); | |
| if (f_ctl & FC_FC_END_SEQ) | |
| fr_eof(fp) = FC_EOF_T; | |
| else | |
| fr_eof(fp) = FC_EOF_N; | |
| (void) lp->tt.frame_send(lp, fp); | |
| } | |
| } | |
| /* | |
| * Send BLS Reject. | |
| * This is for rejecting BA_ABTS only. | |
| */ | |
| static void fc_exch_send_ba_rjt(struct fc_frame *rx_fp, | |
| enum fc_ba_rjt_reason reason, | |
| enum fc_ba_rjt_explan explan) | |
| { | |
| struct fc_frame *fp; | |
| struct fc_frame_header *rx_fh; | |
| struct fc_frame_header *fh; | |
| struct fc_ba_rjt *rp; | |
| struct fc_lport *lp; | |
| unsigned int f_ctl; | |
| lp = fr_dev(rx_fp); | |
| fp = fc_frame_alloc(lp, sizeof(*rp)); | |
| if (!fp) | |
| return; | |
| fh = fc_frame_header_get(fp); | |
| rx_fh = fc_frame_header_get(rx_fp); | |
| memset(fh, 0, sizeof(*fh) + sizeof(*rp)); | |
| rp = fc_frame_payload_get(fp, sizeof(*rp)); | |
| rp->br_reason = reason; | |
| rp->br_explan = explan; | |
| /* | |
| * seq_id, cs_ctl, df_ctl and param/offset are zero. | |
| */ | |
| memcpy(fh->fh_s_id, rx_fh->fh_d_id, 3); | |
| memcpy(fh->fh_d_id, rx_fh->fh_s_id, 3); | |
| fh->fh_ox_id = rx_fh->fh_rx_id; | |
| fh->fh_rx_id = rx_fh->fh_ox_id; | |
| fh->fh_seq_cnt = rx_fh->fh_seq_cnt; | |
| fh->fh_r_ctl = FC_RCTL_BA_RJT; | |
| fh->fh_type = FC_TYPE_BLS; | |
| /* | |
| * Form f_ctl by inverting EX_CTX and SEQ_CTX (bits 23, 22). | |
| * Echo FIRST_SEQ, LAST_SEQ, END_SEQ, END_CONN, SEQ_INIT. | |
| * Bits 9-8 are meaningful (retransmitted or unidirectional). | |
| * Last ACK uses bits 7-6 (continue sequence), | |
| * bits 5-4 are meaningful (what kind of ACK to use). | |
| * Always set LAST_SEQ, END_SEQ. | |
| */ | |
| f_ctl = ntoh24(rx_fh->fh_f_ctl); | |
| f_ctl &= FC_FC_EX_CTX | FC_FC_SEQ_CTX | | |
| FC_FC_END_CONN | FC_FC_SEQ_INIT | | |
| FC_FC_RETX_SEQ | FC_FC_UNI_TX; | |
| f_ctl ^= FC_FC_EX_CTX | FC_FC_SEQ_CTX; | |
| f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ; | |
| f_ctl &= ~FC_FC_FIRST_SEQ; | |
| hton24(fh->fh_f_ctl, f_ctl); | |
| fr_sof(fp) = fc_sof_class(fr_sof(rx_fp)); | |
| fr_eof(fp) = FC_EOF_T; | |
| if (fc_sof_needs_ack(fr_sof(fp))) | |
| fr_eof(fp) = FC_EOF_N; | |
| (void) lp->tt.frame_send(lp, fp); | |
| } | |
| /* | |
| * Handle an incoming ABTS. This would be for target mode usually, | |
| * but could be due to lost FCP transfer ready, confirm or RRQ. | |
| * We always handle this as an exchange abort, ignoring the parameter. | |
| */ | |
| static void fc_exch_recv_abts(struct fc_exch *ep, struct fc_frame *rx_fp) | |
| { | |
| struct fc_frame *fp; | |
| struct fc_ba_acc *ap; | |
| struct fc_frame_header *fh; | |
| struct fc_seq *sp; | |
| if (!ep) | |
| goto reject; | |
| spin_lock_bh(&ep->ex_lock); | |
| if (ep->esb_stat & ESB_ST_COMPLETE) { | |
| spin_unlock_bh(&ep->ex_lock); | |
| goto reject; | |
| } | |
| if (!(ep->esb_stat & ESB_ST_REC_QUAL)) | |
| fc_exch_hold(ep); /* hold for REC_QUAL */ | |
| ep->esb_stat |= ESB_ST_ABNORMAL | ESB_ST_REC_QUAL; | |
| fc_exch_timer_set_locked(ep, ep->r_a_tov); | |
| fp = fc_frame_alloc(ep->lp, sizeof(*ap)); | |
| if (!fp) { | |
| spin_unlock_bh(&ep->ex_lock); | |
| goto free; | |
| } | |
| fh = fc_frame_header_get(fp); | |
| ap = fc_frame_payload_get(fp, sizeof(*ap)); | |
| memset(ap, 0, sizeof(*ap)); | |
| sp = &ep->seq; | |
| ap->ba_high_seq_cnt = htons(0xffff); | |
| if (sp->ssb_stat & SSB_ST_RESP) { | |
| ap->ba_seq_id = sp->id; | |
| ap->ba_seq_id_val = FC_BA_SEQ_ID_VAL; | |
| ap->ba_high_seq_cnt = fh->fh_seq_cnt; | |
| ap->ba_low_seq_cnt = htons(sp->cnt); | |
| } | |
| sp = fc_seq_start_next_locked(sp); | |
| spin_unlock_bh(&ep->ex_lock); | |
| fc_seq_send_last(sp, fp, FC_RCTL_BA_ACC, FC_TYPE_BLS); | |
| fc_frame_free(rx_fp); | |
| return; | |
| reject: | |
| fc_exch_send_ba_rjt(rx_fp, FC_BA_RJT_UNABLE, FC_BA_RJT_INV_XID); | |
| free: | |
| fc_frame_free(rx_fp); | |
| } | |
| /* | |
| * Handle receive where the other end is originating the sequence. | |
| */ | |
| static void fc_exch_recv_req(struct fc_lport *lp, struct fc_exch_mgr *mp, | |
| struct fc_frame *fp) | |
| { | |
| struct fc_frame_header *fh = fc_frame_header_get(fp); | |
| struct fc_seq *sp = NULL; | |
| struct fc_exch *ep = NULL; | |
| enum fc_sof sof; | |
| enum fc_eof eof; | |
| u32 f_ctl; | |
| enum fc_pf_rjt_reason reject; | |
| fr_seq(fp) = NULL; | |
| reject = fc_seq_lookup_recip(mp, fp); | |
| if (reject == FC_RJT_NONE) { | |
| sp = fr_seq(fp); /* sequence will be held */ | |
| ep = fc_seq_exch(sp); | |
| sof = fr_sof(fp); | |
| eof = fr_eof(fp); | |
| f_ctl = ntoh24(fh->fh_f_ctl); | |
| fc_seq_send_ack(sp, fp); | |
| /* | |
| * Call the receive function. | |
| * | |
| * The receive function may allocate a new sequence | |
| * over the old one, so we shouldn't change the | |
| * sequence after this. | |
| * | |
| * The frame will be freed by the receive function. | |
| * If new exch resp handler is valid then call that | |
| * first. | |
| */ | |
| if (ep->resp) | |
| ep->resp(sp, fp, ep->arg); | |
| else | |
| lp->tt.lport_recv(lp, sp, fp); | |
| fc_exch_release(ep); /* release from lookup */ | |
| } else { | |
| FC_DEBUG_EXCH("exch/seq lookup failed: reject %x\n", reject); | |
| fc_frame_free(fp); | |
| } | |
| } | |
| /* | |
| * Handle receive where the other end is originating the sequence in | |
| * response to our exchange. | |
| */ | |
| static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) | |
| { | |
| struct fc_frame_header *fh = fc_frame_header_get(fp); | |
| struct fc_seq *sp; | |
| struct fc_exch *ep; | |
| enum fc_sof sof; | |
| u32 f_ctl; | |
| void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg); | |
| void *ex_resp_arg; | |
| int rc; | |
| ep = fc_exch_find(mp, ntohs(fh->fh_ox_id)); | |
| if (!ep) { | |
| atomic_inc(&mp->stats.xid_not_found); | |
| goto out; | |
| } | |
| if (ep->rxid == FC_XID_UNKNOWN) | |
| ep->rxid = ntohs(fh->fh_rx_id); | |
| if (ep->sid != 0 && ep->sid != ntoh24(fh->fh_d_id)) { | |
| atomic_inc(&mp->stats.xid_not_found); | |
| goto rel; | |
| } | |
| if (ep->did != ntoh24(fh->fh_s_id) && | |
| ep->did != FC_FID_FLOGI) { | |
| atomic_inc(&mp->stats.xid_not_found); | |
| goto rel; | |
| } | |
| sof = fr_sof(fp); | |
| if (fc_sof_is_init(sof)) { | |
| sp = fc_seq_start_next(&ep->seq); | |
| sp->id = fh->fh_seq_id; | |
| sp->ssb_stat |= SSB_ST_RESP; | |
| } else { | |
| sp = &ep->seq; | |
| if (sp->id != fh->fh_seq_id) { | |
| atomic_inc(&mp->stats.seq_not_found); | |
| goto rel; | |
| } | |
| } | |
| f_ctl = ntoh24(fh->fh_f_ctl); | |
| fr_seq(fp) = sp; | |
| if (f_ctl & FC_FC_SEQ_INIT) | |
| ep->esb_stat |= ESB_ST_SEQ_INIT; | |
| if (fc_sof_needs_ack(sof)) | |
| fc_seq_send_ack(sp, fp); | |
| resp = ep->resp; | |
| ex_resp_arg = ep->arg; | |
| if (fh->fh_type != FC_TYPE_FCP && fr_eof(fp) == FC_EOF_T && | |
| (f_ctl & (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) == | |
| (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) { | |
| spin_lock_bh(&ep->ex_lock); | |
| rc = fc_exch_done_locked(ep); | |
| WARN_ON(fc_seq_exch(sp) != ep); | |
| spin_unlock_bh(&ep->ex_lock); | |
| if (!rc) | |
| fc_exch_mgr_delete_ep(ep); | |
| } | |
| /* | |
| * Call the receive function. | |
| * The sequence is held (has a refcnt) for us, | |
| * but not for the receive function. | |
| * | |
| * The receive function may allocate a new sequence | |
| * over the old one, so we shouldn't change the | |
| * sequence after this. | |
| * | |
| * The frame will be freed by the receive function. | |
| * If new exch resp handler is valid then call that | |
| * first. | |
| */ | |
| if (resp) | |
| resp(sp, fp, ex_resp_arg); | |
| else | |
| fc_frame_free(fp); | |
| fc_exch_release(ep); | |
| return; | |
| rel: | |
| fc_exch_release(ep); | |
| out: | |
| fc_frame_free(fp); | |
| } | |
| /* | |
| * Handle receive for a sequence where other end is responding to our sequence. | |
| */ | |
| static void fc_exch_recv_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) | |
| { | |
| struct fc_seq *sp; | |
| sp = fc_seq_lookup_orig(mp, fp); /* doesn't hold sequence */ | |
| if (!sp) { | |
| atomic_inc(&mp->stats.xid_not_found); | |
| FC_DEBUG_EXCH("seq lookup failed\n"); | |
| } else { | |
| atomic_inc(&mp->stats.non_bls_resp); | |
| FC_DEBUG_EXCH("non-BLS response to sequence"); | |
| } | |
| fc_frame_free(fp); | |
| } | |
| /* | |
| * Handle the response to an ABTS for exchange or sequence. | |
| * This can be BA_ACC or BA_RJT. | |
| */ | |
| static void fc_exch_abts_resp(struct fc_exch *ep, struct fc_frame *fp) | |
| { | |
| void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg); | |
| void *ex_resp_arg; | |
| struct fc_frame_header *fh; | |
| struct fc_ba_acc *ap; | |
| struct fc_seq *sp; | |
| u16 low; | |
| u16 high; | |
| int rc = 1, has_rec = 0; | |
| fh = fc_frame_header_get(fp); | |
| FC_DEBUG_EXCH("exch: BLS rctl %x - %s\n", | |
| fh->fh_r_ctl, fc_exch_rctl_name(fh->fh_r_ctl)); | |
| if (cancel_delayed_work_sync(&ep->timeout_work)) | |
| fc_exch_release(ep); /* release from pending timer hold */ | |
| spin_lock_bh(&ep->ex_lock); | |
| switch (fh->fh_r_ctl) { | |
| case FC_RCTL_BA_ACC: | |
| ap = fc_frame_payload_get(fp, sizeof(*ap)); | |
| if (!ap) | |
| break; | |
| /* | |
| * Decide whether to establish a Recovery Qualifier. | |
| * We do this if there is a non-empty SEQ_CNT range and | |
| * SEQ_ID is the same as the one we aborted. | |
| */ | |
| low = ntohs(ap->ba_low_seq_cnt); | |
| high = ntohs(ap->ba_high_seq_cnt); | |
| if ((ep->esb_stat & ESB_ST_REC_QUAL) == 0 && | |
| (ap->ba_seq_id_val != FC_BA_SEQ_ID_VAL || | |
| ap->ba_seq_id == ep->seq_id) && low != high) { | |
| ep->esb_stat |= ESB_ST_REC_QUAL; | |
| fc_exch_hold(ep); /* hold for recovery qualifier */ | |
| has_rec = 1; | |
| } | |
| break; | |
| case FC_RCTL_BA_RJT: | |
| break; | |
| default: | |
| break; | |
| } | |
| resp = ep->resp; | |
| ex_resp_arg = ep->arg; | |
| /* do we need to do some other checks here. Can we reuse more of | |
| * fc_exch_recv_seq_resp | |
| */ | |
| sp = &ep->seq; | |
| /* | |
| * do we want to check END_SEQ as well as LAST_SEQ here? | |
| */ | |
| if (ep->fh_type != FC_TYPE_FCP && | |
| ntoh24(fh->fh_f_ctl) & FC_FC_LAST_SEQ) | |
| rc = fc_exch_done_locked(ep); | |
| spin_unlock_bh(&ep->ex_lock); | |
| if (!rc) | |
| fc_exch_mgr_delete_ep(ep); | |
| if (resp) | |
| resp(sp, fp, ex_resp_arg); | |
| else | |
| fc_frame_free(fp); | |
| if (has_rec) | |
| fc_exch_timer_set(ep, ep->r_a_tov); | |
| } | |
| /* | |
| * Receive BLS sequence. | |
| * This is always a sequence initiated by the remote side. | |
| * We may be either the originator or recipient of the exchange. | |
| */ | |
| static void fc_exch_recv_bls(struct fc_exch_mgr *mp, struct fc_frame *fp) | |
| { | |
| struct fc_frame_header *fh; | |
| struct fc_exch *ep; | |
| u32 f_ctl; | |
| fh = fc_frame_header_get(fp); | |
| f_ctl = ntoh24(fh->fh_f_ctl); | |
| fr_seq(fp) = NULL; | |
| ep = fc_exch_find(mp, (f_ctl & FC_FC_EX_CTX) ? | |
| ntohs(fh->fh_ox_id) : ntohs(fh->fh_rx_id)); | |
| if (ep && (f_ctl & FC_FC_SEQ_INIT)) { | |
| spin_lock_bh(&ep->ex_lock); | |
| ep->esb_stat |= ESB_ST_SEQ_INIT; | |
| spin_unlock_bh(&ep->ex_lock); | |
| } | |
| if (f_ctl & FC_FC_SEQ_CTX) { | |
| /* | |
| * A response to a sequence we initiated. | |
| * This should only be ACKs for class 2 or F. | |
| */ | |
| switch (fh->fh_r_ctl) { | |
| case FC_RCTL_ACK_1: | |
| case FC_RCTL_ACK_0: | |
| break; | |
| default: | |
| FC_DEBUG_EXCH("BLS rctl %x - %s received", | |
| fh->fh_r_ctl, | |
| fc_exch_rctl_name(fh->fh_r_ctl)); | |
| break; | |
| } | |
| fc_frame_free(fp); | |
| } else { | |
| switch (fh->fh_r_ctl) { | |
| case FC_RCTL_BA_RJT: | |
| case FC_RCTL_BA_ACC: | |
| if (ep) | |
| fc_exch_abts_resp(ep, fp); | |
| else | |
| fc_frame_free(fp); | |
| break; | |
| case FC_RCTL_BA_ABTS: | |
| fc_exch_recv_abts(ep, fp); | |
| break; | |
| default: /* ignore junk */ | |
| fc_frame_free(fp); | |
| break; | |
| } | |
| } | |
| if (ep) | |
| fc_exch_release(ep); /* release hold taken by fc_exch_find */ | |
| } | |
| /* | |
| * Accept sequence with LS_ACC. | |
| * If this fails due to allocation or transmit congestion, assume the | |
| * originator will repeat the sequence. | |
| */ | |
| static void fc_seq_ls_acc(struct fc_seq *req_sp) | |
| { | |
| struct fc_seq *sp; | |
| struct fc_els_ls_acc *acc; | |
| struct fc_frame *fp; | |
| sp = fc_seq_start_next(req_sp); | |
| fp = fc_frame_alloc(fc_seq_exch(sp)->lp, sizeof(*acc)); | |
| if (fp) { | |
| acc = fc_frame_payload_get(fp, sizeof(*acc)); | |
| memset(acc, 0, sizeof(*acc)); | |
| acc->la_cmd = ELS_LS_ACC; | |
| fc_seq_send_last(sp, fp, FC_RCTL_ELS_REP, FC_TYPE_ELS); | |
| } | |
| } | |
| /* | |
| * Reject sequence with ELS LS_RJT. | |
| * If this fails due to allocation or transmit congestion, assume the | |
| * originator will repeat the sequence. | |
| */ | |
| static void fc_seq_ls_rjt(struct fc_seq *req_sp, enum fc_els_rjt_reason reason, | |
| enum fc_els_rjt_explan explan) | |
| { | |
| struct fc_seq *sp; | |
| struct fc_els_ls_rjt *rjt; | |
| struct fc_frame *fp; | |
| sp = fc_seq_start_next(req_sp); | |
| fp = fc_frame_alloc(fc_seq_exch(sp)->lp, sizeof(*rjt)); | |
| if (fp) { | |
| rjt = fc_frame_payload_get(fp, sizeof(*rjt)); | |
| memset(rjt, 0, sizeof(*rjt)); | |
| rjt->er_cmd = ELS_LS_RJT; | |
| rjt->er_reason = reason; | |
| rjt->er_explan = explan; | |
| fc_seq_send_last(sp, fp, FC_RCTL_ELS_REP, FC_TYPE_ELS); | |
| } | |
| } | |
| static void fc_exch_reset(struct fc_exch *ep) | |
| { | |
| struct fc_seq *sp; | |
| void (*resp)(struct fc_seq *, struct fc_frame *, void *); | |
| void *arg; | |
| int rc = 1; | |
| spin_lock_bh(&ep->ex_lock); | |
| ep->state |= FC_EX_RST_CLEANUP; | |
| /* | |
| * we really want to call del_timer_sync, but cannot due | |
| * to the lport calling with the lport lock held (some resp | |
| * functions can also grab the lport lock which could cause | |
| * a deadlock). | |
| */ | |
| if (cancel_delayed_work(&ep->timeout_work)) | |
| atomic_dec(&ep->ex_refcnt); /* drop hold for timer */ | |
| resp = ep->resp; | |
| ep->resp = NULL; | |
| if (ep->esb_stat & ESB_ST_REC_QUAL) | |
| atomic_dec(&ep->ex_refcnt); /* drop hold for rec_qual */ | |
| ep->esb_stat &= ~ESB_ST_REC_QUAL; | |
| arg = ep->arg; | |
| sp = &ep->seq; | |
| rc = fc_exch_done_locked(ep); | |
| spin_unlock_bh(&ep->ex_lock); | |
| if (!rc) | |
| fc_exch_mgr_delete_ep(ep); | |
| if (resp) | |
| resp(sp, ERR_PTR(-FC_EX_CLOSED), arg); | |
| } | |
| /* | |
| * Reset an exchange manager, releasing all sequences and exchanges. | |
| * If sid is non-zero, reset only exchanges we source from that FID. | |
| * If did is non-zero, reset only exchanges destined to that FID. | |
| */ | |
| void fc_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did) | |
| { | |
| struct fc_exch *ep; | |
| struct fc_exch *next; | |
| struct fc_exch_mgr *mp = lp->emp; | |
| spin_lock_bh(&mp->em_lock); | |
| restart: | |
| list_for_each_entry_safe(ep, next, &mp->ex_list, ex_list) { | |
| if ((sid == 0 || sid == ep->sid) && | |
| (did == 0 || did == ep->did)) { | |
| fc_exch_hold(ep); | |
| spin_unlock_bh(&mp->em_lock); | |
| fc_exch_reset(ep); | |
| fc_exch_release(ep); | |
| spin_lock_bh(&mp->em_lock); | |
| /* | |
| * must restart loop incase while lock was down | |
| * multiple eps were released. | |
| */ | |
| goto restart; | |
| } | |
| } | |
| spin_unlock_bh(&mp->em_lock); | |
| } | |
| EXPORT_SYMBOL(fc_exch_mgr_reset); | |
| /* | |
| * Handle incoming ELS REC - Read Exchange Concise. | |
| * Note that the requesting port may be different than the S_ID in the request. | |
| */ | |
| static void fc_exch_els_rec(struct fc_seq *sp, struct fc_frame *rfp) | |
| { | |
| struct fc_frame *fp; | |
| struct fc_exch *ep; | |
| struct fc_exch_mgr *em; | |
| struct fc_els_rec *rp; | |
| struct fc_els_rec_acc *acc; | |
| enum fc_els_rjt_reason reason = ELS_RJT_LOGIC; | |
| enum fc_els_rjt_explan explan; | |
| u32 sid; | |
| u16 rxid; | |
| u16 oxid; | |
| rp = fc_frame_payload_get(rfp, sizeof(*rp)); | |
| explan = ELS_EXPL_INV_LEN; | |
| if (!rp) | |
| goto reject; | |
| sid = ntoh24(rp->rec_s_id); | |
| rxid = ntohs(rp->rec_rx_id); | |
| oxid = ntohs(rp->rec_ox_id); | |
| /* | |
| * Currently it's hard to find the local S_ID from the exchange | |
| * manager. This will eventually be fixed, but for now it's easier | |
| * to lookup the subject exchange twice, once as if we were | |
| * the initiator, and then again if we weren't. | |
| */ | |
| em = fc_seq_exch(sp)->em; | |
| ep = fc_exch_find(em, oxid); | |
| explan = ELS_EXPL_OXID_RXID; | |
| if (ep && ep->oid == sid) { | |
| if (ep->rxid != FC_XID_UNKNOWN && | |
| rxid != FC_XID_UNKNOWN && | |
| ep->rxid != rxid) | |
| goto rel; | |
| } else { | |
| if (ep) | |
| fc_exch_release(ep); | |
| ep = NULL; | |
| if (rxid != FC_XID_UNKNOWN) | |
| ep = fc_exch_find(em, rxid); | |
| if (!ep) | |
| goto reject; | |
| } | |
| fp = fc_frame_alloc(fc_seq_exch(sp)->lp, sizeof(*acc)); | |
| if (!fp) { | |
| fc_exch_done(sp); | |
| goto out; | |
| } | |
| sp = fc_seq_start_next(sp); | |
| acc = fc_frame_payload_get(fp, sizeof(*acc)); | |
| memset(acc, 0, sizeof(*acc)); | |
| acc->reca_cmd = ELS_LS_ACC; | |
| acc->reca_ox_id = rp->rec_ox_id; | |
| memcpy(acc->reca_ofid, rp->rec_s_id, 3); | |
| acc->reca_rx_id = htons(ep->rxid); | |
| if (ep->sid == ep->oid) | |
| hton24(acc->reca_rfid, ep->did); | |
| else | |
| hton24(acc->reca_rfid, ep->sid); | |
| acc->reca_fc4value = htonl(ep->seq.rec_data); | |
| acc->reca_e_stat = htonl(ep->esb_stat & (ESB_ST_RESP | | |
| ESB_ST_SEQ_INIT | | |
| ESB_ST_COMPLETE)); | |
| sp = fc_seq_start_next(sp); | |
| fc_seq_send_last(sp, fp, FC_RCTL_ELS_REP, FC_TYPE_ELS); | |
| out: | |
| fc_exch_release(ep); | |
| fc_frame_free(rfp); | |
| return; | |
| rel: | |
| fc_exch_release(ep); | |
| reject: | |
| fc_seq_ls_rjt(sp, reason, explan); | |
| fc_frame_free(rfp); | |
| } | |
| /* | |
| * Handle response from RRQ. | |
| * Not much to do here, really. | |
| * Should report errors. | |
| * | |
| * TODO: fix error handler. | |
| */ | |
| static void fc_exch_rrq_resp(struct fc_seq *sp, struct fc_frame *fp, void *arg) | |
| { | |
| struct fc_exch *aborted_ep = arg; | |
| unsigned int op; | |
| if (IS_ERR(fp)) { | |
| int err = PTR_ERR(fp); | |
| if (err == -FC_EX_CLOSED || err == -FC_EX_TIMEOUT) | |
| goto cleanup; | |
| FC_DBG("Cannot process RRQ, because of frame error %d\n", err); | |
| return; | |
| } | |
| op = fc_frame_payload_op(fp); | |
| fc_frame_free(fp); | |
| switch (op) { | |
| case ELS_LS_RJT: | |
| FC_DBG("LS_RJT for RRQ"); | |
| /* fall through */ | |
| case ELS_LS_ACC: | |
| goto cleanup; | |
| default: | |
| FC_DBG("unexpected response op %x for RRQ", op); | |
| return; | |
| } | |
| cleanup: | |
| fc_exch_done(&aborted_ep->seq); | |
| /* drop hold for rec qual */ | |
| fc_exch_release(aborted_ep); | |
| } | |
| /* | |
| * Send ELS RRQ - Reinstate Recovery Qualifier. | |
| * This tells the remote port to stop blocking the use of | |
| * the exchange and the seq_cnt range. | |
| */ | |
| static void fc_exch_rrq(struct fc_exch *ep) | |
| { | |
| struct fc_lport *lp; | |
| struct fc_els_rrq *rrq; | |
| struct fc_frame *fp; | |
| struct fc_seq *rrq_sp; | |
| u32 did; | |
| lp = ep->lp; | |
| fp = fc_frame_alloc(lp, sizeof(*rrq)); | |
| if (!fp) | |
| return; | |
| rrq = fc_frame_payload_get(fp, sizeof(*rrq)); | |
| memset(rrq, 0, sizeof(*rrq)); | |
| rrq->rrq_cmd = ELS_RRQ; | |
| hton24(rrq->rrq_s_id, ep->sid); | |
| rrq->rrq_ox_id = htons(ep->oxid); | |
| rrq->rrq_rx_id = htons(ep->rxid); | |
| did = ep->did; | |
| if (ep->esb_stat & ESB_ST_RESP) | |
| did = ep->sid; | |
| fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, did, | |
| fc_host_port_id(lp->host), FC_TYPE_ELS, | |
| FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); | |
| rrq_sp = fc_exch_seq_send(lp, fp, fc_exch_rrq_resp, NULL, ep, | |
| lp->e_d_tov); | |
| if (!rrq_sp) { | |
| ep->esb_stat |= ESB_ST_REC_QUAL; | |
| fc_exch_timer_set_locked(ep, ep->r_a_tov); | |
| return; | |
| } | |
| } | |
| /* | |
| * Handle incoming ELS RRQ - Reset Recovery Qualifier. | |
| */ | |
| static void fc_exch_els_rrq(struct fc_seq *sp, struct fc_frame *fp) | |
| { | |
| struct fc_exch *ep; /* request or subject exchange */ | |
| struct fc_els_rrq *rp; | |
| u32 sid; | |
| u16 xid; | |
| enum fc_els_rjt_explan explan; | |
| rp = fc_frame_payload_get(fp, sizeof(*rp)); | |
| explan = ELS_EXPL_INV_LEN; | |
| if (!rp) | |
| goto reject; | |
| /* | |
| * lookup subject exchange. | |
| */ | |
| ep = fc_seq_exch(sp); | |
| sid = ntoh24(rp->rrq_s_id); /* subject source */ | |
| xid = ep->did == sid ? ntohs(rp->rrq_ox_id) : ntohs(rp->rrq_rx_id); | |
| ep = fc_exch_find(ep->em, xid); | |
| explan = ELS_EXPL_OXID_RXID; | |
| if (!ep) | |
| goto reject; | |
| spin_lock_bh(&ep->ex_lock); | |
| if (ep->oxid != ntohs(rp->rrq_ox_id)) | |
| goto unlock_reject; | |
| if (ep->rxid != ntohs(rp->rrq_rx_id) && | |
| ep->rxid != FC_XID_UNKNOWN) | |
| goto unlock_reject; | |
| explan = ELS_EXPL_SID; | |
| if (ep->sid != sid) | |
| goto unlock_reject; | |
| /* | |
| * Clear Recovery Qualifier state, and cancel timer if complete. | |
| */ | |
| if (ep->esb_stat & ESB_ST_REC_QUAL) { | |
| ep->esb_stat &= ~ESB_ST_REC_QUAL; | |
| atomic_dec(&ep->ex_refcnt); /* drop hold for rec qual */ | |
| } | |
| if (ep->esb_stat & ESB_ST_COMPLETE) { | |
| if (cancel_delayed_work(&ep->timeout_work)) | |
| atomic_dec(&ep->ex_refcnt); /* drop timer hold */ | |
| } | |
| spin_unlock_bh(&ep->ex_lock); | |
| /* | |
| * Send LS_ACC. | |
| */ | |
| fc_seq_ls_acc(sp); | |
| fc_frame_free(fp); | |
| return; | |
| unlock_reject: | |
| spin_unlock_bh(&ep->ex_lock); | |
| fc_exch_release(ep); /* drop hold from fc_exch_find */ | |
| reject: | |
| fc_seq_ls_rjt(sp, ELS_RJT_LOGIC, explan); | |
| fc_frame_free(fp); | |
| } | |
| struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lp, | |
| enum fc_class class, | |
| u16 min_xid, u16 max_xid) | |
| { | |
| struct fc_exch_mgr *mp; | |
| size_t len; | |
| if (max_xid <= min_xid || min_xid == 0 || max_xid == FC_XID_UNKNOWN) { | |
| FC_DBG("Invalid min_xid 0x:%x and max_xid 0x:%x\n", | |
| min_xid, max_xid); | |
| return NULL; | |
| } | |
| /* | |
| * Memory need for EM | |
| */ | |
| #define xid_ok(i, m1, m2) (((i) >= (m1)) && ((i) <= (m2))) | |
| len = (max_xid - min_xid + 1) * (sizeof(struct fc_exch *)); | |
| len += sizeof(struct fc_exch_mgr); | |
| mp = kzalloc(len, GFP_ATOMIC); | |
| if (!mp) | |
| return NULL; | |
| mp->class = class; | |
| mp->total_exches = 0; | |
| mp->exches = (struct fc_exch **)(mp + 1); | |
| mp->lp = lp; | |
| /* adjust em exch xid range for offload */ | |
| mp->min_xid = min_xid; | |
| mp->max_xid = max_xid; | |
| mp->last_xid = min_xid - 1; | |
| mp->max_read = 0; | |
| mp->last_read = 0; | |
| if (lp->lro_enabled && xid_ok(lp->lro_xid, min_xid, max_xid)) { | |
| mp->max_read = lp->lro_xid; | |
| mp->last_read = min_xid - 1; | |
| mp->last_xid = mp->max_read; | |
| } else { | |
| /* disable lro if no xid control over read */ | |
| lp->lro_enabled = 0; | |
| } | |
| INIT_LIST_HEAD(&mp->ex_list); | |
| spin_lock_init(&mp->em_lock); | |
| mp->ep_pool = mempool_create_slab_pool(2, fc_em_cachep); | |
| if (!mp->ep_pool) | |
| goto free_mp; | |
| return mp; | |
| free_mp: | |
| kfree(mp); | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(fc_exch_mgr_alloc); | |
| void fc_exch_mgr_free(struct fc_exch_mgr *mp) | |
| { | |
| WARN_ON(!mp); | |
| /* | |
| * The total exch count must be zero | |
| * before freeing exchange manager. | |
| */ | |
| WARN_ON(mp->total_exches != 0); | |
| mempool_destroy(mp->ep_pool); | |
| kfree(mp); | |
| } | |
| EXPORT_SYMBOL(fc_exch_mgr_free); | |
| struct fc_exch *fc_exch_get(struct fc_lport *lp, struct fc_frame *fp) | |
| { | |
| if (!lp || !lp->emp) | |
| return NULL; | |
| return fc_exch_alloc(lp->emp, fp, 0); | |
| } | |
| EXPORT_SYMBOL(fc_exch_get); | |
| struct fc_seq *fc_exch_seq_send(struct fc_lport *lp, | |
| struct fc_frame *fp, | |
| void (*resp)(struct fc_seq *, | |
| struct fc_frame *fp, | |
| void *arg), | |
| void (*destructor)(struct fc_seq *, void *), | |
| void *arg, u32 timer_msec) | |
| { | |
| struct fc_exch *ep; | |
| struct fc_seq *sp = NULL; | |
| struct fc_frame_header *fh; | |
| int rc = 1; | |
| ep = lp->tt.exch_get(lp, fp); | |
| if (!ep) { | |
| fc_frame_free(fp); | |
| return NULL; | |
| } | |
| ep->esb_stat |= ESB_ST_SEQ_INIT; | |
| fh = fc_frame_header_get(fp); | |
| fc_exch_set_addr(ep, ntoh24(fh->fh_s_id), ntoh24(fh->fh_d_id)); | |
| ep->resp = resp; | |
| ep->destructor = destructor; | |
| ep->arg = arg; | |
| ep->r_a_tov = FC_DEF_R_A_TOV; | |
| ep->lp = lp; | |
| sp = &ep->seq; | |
| ep->fh_type = fh->fh_type; /* save for possbile timeout handling */ | |
| ep->f_ctl = ntoh24(fh->fh_f_ctl); | |
| fc_exch_setup_hdr(ep, fp, ep->f_ctl); | |
| sp->cnt++; | |
| fc_fcp_ddp_setup(fr_fsp(fp), ep->xid); | |
| if (unlikely(lp->tt.frame_send(lp, fp))) | |
| goto err; | |
| if (timer_msec) | |
| fc_exch_timer_set_locked(ep, timer_msec); | |
| ep->f_ctl &= ~FC_FC_FIRST_SEQ; /* not first seq */ | |
| if (ep->f_ctl & FC_FC_SEQ_INIT) | |
| ep->esb_stat &= ~ESB_ST_SEQ_INIT; | |
| spin_unlock_bh(&ep->ex_lock); | |
| return sp; | |
| err: | |
| rc = fc_exch_done_locked(ep); | |
| spin_unlock_bh(&ep->ex_lock); | |
| if (!rc) | |
| fc_exch_mgr_delete_ep(ep); | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(fc_exch_seq_send); | |
| /* | |
| * Receive a frame | |
| */ | |
| void fc_exch_recv(struct fc_lport *lp, struct fc_exch_mgr *mp, | |
| struct fc_frame *fp) | |
| { | |
| struct fc_frame_header *fh = fc_frame_header_get(fp); | |
| u32 f_ctl; | |
| /* lport lock ? */ | |
| if (!lp || !mp || (lp->state == LPORT_ST_NONE)) { | |
| FC_DBG("fc_lport or EM is not allocated and configured"); | |
| fc_frame_free(fp); | |
| return; | |
| } | |
| /* | |
| * If frame is marked invalid, just drop it. | |
| */ | |
| f_ctl = ntoh24(fh->fh_f_ctl); | |
| switch (fr_eof(fp)) { | |
| case FC_EOF_T: | |
| if (f_ctl & FC_FC_END_SEQ) | |
| skb_trim(fp_skb(fp), fr_len(fp) - FC_FC_FILL(f_ctl)); | |
| /* fall through */ | |
| case FC_EOF_N: | |
| if (fh->fh_type == FC_TYPE_BLS) | |
| fc_exch_recv_bls(mp, fp); | |
| else if ((f_ctl & (FC_FC_EX_CTX | FC_FC_SEQ_CTX)) == | |
| FC_FC_EX_CTX) | |
| fc_exch_recv_seq_resp(mp, fp); | |
| else if (f_ctl & FC_FC_SEQ_CTX) | |
| fc_exch_recv_resp(mp, fp); | |
| else | |
| fc_exch_recv_req(lp, mp, fp); | |
| break; | |
| default: | |
| FC_DBG("dropping invalid frame (eof %x)", fr_eof(fp)); | |
| fc_frame_free(fp); | |
| break; | |
| } | |
| } | |
| EXPORT_SYMBOL(fc_exch_recv); | |
| int fc_exch_init(struct fc_lport *lp) | |
| { | |
| if (!lp->tt.exch_get) { | |
| /* | |
| * exch_put() should be NULL if | |
| * exch_get() is NULL | |
| */ | |
| WARN_ON(lp->tt.exch_put); | |
| lp->tt.exch_get = fc_exch_get; | |
| } | |
| if (!lp->tt.seq_start_next) | |
| lp->tt.seq_start_next = fc_seq_start_next; | |
| if (!lp->tt.exch_seq_send) | |
| lp->tt.exch_seq_send = fc_exch_seq_send; | |
| if (!lp->tt.seq_send) | |
| lp->tt.seq_send = fc_seq_send; | |
| if (!lp->tt.seq_els_rsp_send) | |
| lp->tt.seq_els_rsp_send = fc_seq_els_rsp_send; | |
| if (!lp->tt.exch_done) | |
| lp->tt.exch_done = fc_exch_done; | |
| if (!lp->tt.exch_mgr_reset) | |
| lp->tt.exch_mgr_reset = fc_exch_mgr_reset; | |
| if (!lp->tt.seq_exch_abort) | |
| lp->tt.seq_exch_abort = fc_seq_exch_abort; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(fc_exch_init); | |
| int fc_setup_exch_mgr(void) | |
| { | |
| fc_em_cachep = kmem_cache_create("libfc_em", sizeof(struct fc_exch), | |
| 0, SLAB_HWCACHE_ALIGN, NULL); | |
| if (!fc_em_cachep) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| void fc_destroy_exch_mgr(void) | |
| { | |
| kmem_cache_destroy(fc_em_cachep); | |
| } |