| #ifndef _ASM_IO_H | |
| #define _ASM_IO_H | |
| /* | |
| * This file contains the definitions for the x86 IO instructions | |
| * inb/inw/inl/outb/outw/outl and the "string versions" of the same | |
| * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" | |
| * versions of the single-IO instructions (inb_p/inw_p/..). | |
| * | |
| * This file is not meant to be obfuscating: it's just complicated | |
| * to (a) handle it all in a way that makes gcc able to optimize it | |
| * as well as possible and (b) trying to avoid writing the same thing | |
| * over and over again with slight variations and possibly making a | |
| * mistake somewhere. | |
| */ | |
| /* | |
| * Thanks to James van Artsdalen for a better timing-fix than | |
| * the two short jumps: using outb's to a nonexistent port seems | |
| * to guarantee better timings even on fast machines. | |
| * | |
| * On the other hand, I'd like to be sure of a non-existent port: | |
| * I feel a bit unsafe about using 0x80 (should be safe, though) | |
| * | |
| * Linus | |
| */ | |
| /* | |
| * Bit simplified and optimized by Jan Hubicka | |
| * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. | |
| * | |
| * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, | |
| * isa_read[wl] and isa_write[wl] fixed | |
| * - Arnaldo Carvalho de Melo <acme@conectiva.com.br> | |
| */ | |
| #define __SLOW_DOWN_IO "\noutb %%al,$0x80" | |
| #ifdef REALLY_SLOW_IO | |
| #define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO | |
| #else | |
| #define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO | |
| #endif | |
| /* | |
| * Talk about misusing macros.. | |
| */ | |
| #define __OUT1(s,x) \ | |
| static inline void out##s(unsigned x value, unsigned short port) { | |
| #define __OUT2(s,s1,s2) \ | |
| __asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1" | |
| #define __OUT(s,s1,x) \ | |
| __OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \ | |
| __OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));} \ | |
| #define __IN1(s) \ | |
| static inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v; | |
| #define __IN2(s,s1,s2) \ | |
| __asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0" | |
| #define __IN(s,s1,i...) \ | |
| __IN1(s) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \ | |
| __IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \ | |
| #define __INS(s) \ | |
| static inline void ins##s(unsigned short port, void * addr, unsigned long count) \ | |
| { __asm__ __volatile__ ("rep ; ins" #s \ | |
| : "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); } | |
| #define __OUTS(s) \ | |
| static inline void outs##s(unsigned short port, const void * addr, unsigned long count) \ | |
| { __asm__ __volatile__ ("rep ; outs" #s \ | |
| : "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); } | |
| #define RETURN_TYPE unsigned char | |
| __IN(b,"") | |
| #undef RETURN_TYPE | |
| #define RETURN_TYPE unsigned short | |
| __IN(w,"") | |
| #undef RETURN_TYPE | |
| #define RETURN_TYPE unsigned int | |
| __IN(l,"") | |
| #undef RETURN_TYPE | |
| __OUT(b,"b",char) | |
| __OUT(w,"w",short) | |
| __OUT(l,,int) | |
| __INS(b) | |
| __INS(w) | |
| __INS(l) | |
| __OUTS(b) | |
| __OUTS(w) | |
| __OUTS(l) | |
| #define IO_SPACE_LIMIT 0xffff | |
| #if defined(__KERNEL__) && __x86_64__ | |
| #include <linux/vmalloc.h> | |
| #ifndef __i386__ | |
| /* | |
| * Change virtual addresses to physical addresses and vv. | |
| * These are pretty trivial | |
| */ | |
| static inline unsigned long virt_to_phys(volatile void * address) | |
| { | |
| return __pa(address); | |
| } | |
| static inline void * phys_to_virt(unsigned long address) | |
| { | |
| return __va(address); | |
| } | |
| #endif | |
| /* | |
| * Change "struct page" to physical address. | |
| */ | |
| #define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) | |
| #include <asm-generic/iomap.h> | |
| extern void __iomem *__ioremap(unsigned long offset, unsigned long size, unsigned long flags); | |
| static inline void __iomem * ioremap (unsigned long offset, unsigned long size) | |
| { | |
| return __ioremap(offset, size, 0); | |
| } | |
| extern void *early_ioremap(unsigned long addr, unsigned long size); | |
| extern void early_iounmap(void *addr, unsigned long size); | |
| /* | |
| * This one maps high address device memory and turns off caching for that area. | |
| * it's useful if some control registers are in such an area and write combining | |
| * or read caching is not desirable: | |
| */ | |
| extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size); | |
| extern void iounmap(volatile void __iomem *addr); | |
| /* | |
| * ISA I/O bus memory addresses are 1:1 with the physical address. | |
| */ | |
| #define isa_virt_to_bus virt_to_phys | |
| #define isa_page_to_bus page_to_phys | |
| #define isa_bus_to_virt phys_to_virt | |
| /* | |
| * However PCI ones are not necessarily 1:1 and therefore these interfaces | |
| * are forbidden in portable PCI drivers. | |
| * | |
| * Allow them on x86 for legacy drivers, though. | |
| */ | |
| #define virt_to_bus virt_to_phys | |
| #define bus_to_virt phys_to_virt | |
| /* | |
| * readX/writeX() are used to access memory mapped devices. On some | |
| * architectures the memory mapped IO stuff needs to be accessed | |
| * differently. On the x86 architecture, we just read/write the | |
| * memory location directly. | |
| */ | |
| static inline __u8 __readb(const volatile void __iomem *addr) | |
| { | |
| return *(__force volatile __u8 *)addr; | |
| } | |
| static inline __u16 __readw(const volatile void __iomem *addr) | |
| { | |
| return *(__force volatile __u16 *)addr; | |
| } | |
| static __always_inline __u32 __readl(const volatile void __iomem *addr) | |
| { | |
| return *(__force volatile __u32 *)addr; | |
| } | |
| static inline __u64 __readq(const volatile void __iomem *addr) | |
| { | |
| return *(__force volatile __u64 *)addr; | |
| } | |
| #define readb(x) __readb(x) | |
| #define readw(x) __readw(x) | |
| #define readl(x) __readl(x) | |
| #define readq(x) __readq(x) | |
| #define readb_relaxed(a) readb(a) | |
| #define readw_relaxed(a) readw(a) | |
| #define readl_relaxed(a) readl(a) | |
| #define readq_relaxed(a) readq(a) | |
| #define __raw_readb readb | |
| #define __raw_readw readw | |
| #define __raw_readl readl | |
| #define __raw_readq readq | |
| #define mmiowb() | |
| static inline void __writel(__u32 b, volatile void __iomem *addr) | |
| { | |
| *(__force volatile __u32 *)addr = b; | |
| } | |
| static inline void __writeq(__u64 b, volatile void __iomem *addr) | |
| { | |
| *(__force volatile __u64 *)addr = b; | |
| } | |
| static inline void __writeb(__u8 b, volatile void __iomem *addr) | |
| { | |
| *(__force volatile __u8 *)addr = b; | |
| } | |
| static inline void __writew(__u16 b, volatile void __iomem *addr) | |
| { | |
| *(__force volatile __u16 *)addr = b; | |
| } | |
| #define writeq(val,addr) __writeq((val),(addr)) | |
| #define writel(val,addr) __writel((val),(addr)) | |
| #define writew(val,addr) __writew((val),(addr)) | |
| #define writeb(val,addr) __writeb((val),(addr)) | |
| #define __raw_writeb writeb | |
| #define __raw_writew writew | |
| #define __raw_writel writel | |
| #define __raw_writeq writeq | |
| void __memcpy_fromio(void*,unsigned long,unsigned); | |
| void __memcpy_toio(unsigned long,const void*,unsigned); | |
| static inline void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len) | |
| { | |
| __memcpy_fromio(to,(unsigned long)from,len); | |
| } | |
| static inline void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len) | |
| { | |
| __memcpy_toio((unsigned long)to,from,len); | |
| } | |
| void memset_io(volatile void __iomem *a, int b, size_t c); | |
| /* | |
| * ISA space is 'always mapped' on a typical x86 system, no need to | |
| * explicitly ioremap() it. The fact that the ISA IO space is mapped | |
| * to PAGE_OFFSET is pure coincidence - it does not mean ISA values | |
| * are physical addresses. The following constant pointer can be | |
| * used as the IO-area pointer (it can be iounmapped as well, so the | |
| * analogy with PCI is quite large): | |
| */ | |
| #define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) | |
| /* | |
| * Again, x86-64 does not require mem IO specific function. | |
| */ | |
| #define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void *)(b),(c),(d)) | |
| /** | |
| * check_signature - find BIOS signatures | |
| * @io_addr: mmio address to check | |
| * @signature: signature block | |
| * @length: length of signature | |
| * | |
| * Perform a signature comparison with the mmio address io_addr. This | |
| * address should have been obtained by ioremap. | |
| * Returns 1 on a match. | |
| */ | |
| static inline int check_signature(void __iomem *io_addr, | |
| const unsigned char *signature, int length) | |
| { | |
| int retval = 0; | |
| do { | |
| if (readb(io_addr) != *signature) | |
| goto out; | |
| io_addr++; | |
| signature++; | |
| length--; | |
| } while (length); | |
| retval = 1; | |
| out: | |
| return retval; | |
| } | |
| /* Nothing to do */ | |
| #define dma_cache_inv(_start,_size) do { } while (0) | |
| #define dma_cache_wback(_start,_size) do { } while (0) | |
| #define dma_cache_wback_inv(_start,_size) do { } while (0) | |
| #define flush_write_buffers() | |
| extern int iommu_bio_merge; | |
| #define BIO_VMERGE_BOUNDARY iommu_bio_merge | |
| /* | |
| * Convert a physical pointer to a virtual kernel pointer for /dev/mem | |
| * access | |
| */ | |
| #define xlate_dev_mem_ptr(p) __va(p) | |
| /* | |
| * Convert a virtual cached pointer to an uncached pointer | |
| */ | |
| #define xlate_dev_kmem_ptr(p) p | |
| #endif /* __KERNEL__ */ | |
| #endif |