| #ifndef _ASM_POWERPC_MPIC_H | |
| #define _ASM_POWERPC_MPIC_H | |
| #ifdef __KERNEL__ | |
| #include <linux/irq.h> | |
| /* | |
| * Global registers | |
| */ | |
| #define MPIC_GREG_BASE 0x01000 | |
| #define MPIC_GREG_FEATURE_0 0x00000 | |
| #define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 | |
| #define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 | |
| #define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 | |
| #define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 | |
| #define MPIC_GREG_FEATURE_VERSION_MASK 0xff | |
| #define MPIC_GREG_FEATURE_1 0x00010 | |
| #define MPIC_GREG_GLOBAL_CONF_0 0x00020 | |
| #define MPIC_GREG_GCONF_RESET 0x80000000 | |
| #define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 | |
| #define MPIC_GREG_GCONF_BASE_MASK 0x000fffff | |
| #define MPIC_GREG_GLOBAL_CONF_1 0x00030 | |
| #define MPIC_GREG_VENDOR_0 0x00040 | |
| #define MPIC_GREG_VENDOR_1 0x00050 | |
| #define MPIC_GREG_VENDOR_2 0x00060 | |
| #define MPIC_GREG_VENDOR_3 0x00070 | |
| #define MPIC_GREG_VENDOR_ID 0x00080 | |
| #define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 | |
| #define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 | |
| #define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 | |
| #define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 | |
| #define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff | |
| #define MPIC_GREG_PROCESSOR_INIT 0x00090 | |
| #define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 | |
| #define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 | |
| #define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 | |
| #define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 | |
| #define MPIC_GREG_SPURIOUS 0x000e0 | |
| #define MPIC_GREG_TIMER_FREQ 0x000f0 | |
| /* | |
| * | |
| * Timer registers | |
| */ | |
| #define MPIC_TIMER_BASE 0x01100 | |
| #define MPIC_TIMER_STRIDE 0x40 | |
| #define MPIC_TIMER_CURRENT_CNT 0x00000 | |
| #define MPIC_TIMER_BASE_CNT 0x00010 | |
| #define MPIC_TIMER_VECTOR_PRI 0x00020 | |
| #define MPIC_TIMER_DESTINATION 0x00030 | |
| /* | |
| * Per-Processor registers | |
| */ | |
| #define MPIC_CPU_THISBASE 0x00000 | |
| #define MPIC_CPU_BASE 0x20000 | |
| #define MPIC_CPU_STRIDE 0x01000 | |
| #define MPIC_CPU_IPI_DISPATCH_0 0x00040 | |
| #define MPIC_CPU_IPI_DISPATCH_1 0x00050 | |
| #define MPIC_CPU_IPI_DISPATCH_2 0x00060 | |
| #define MPIC_CPU_IPI_DISPATCH_3 0x00070 | |
| #define MPIC_CPU_CURRENT_TASK_PRI 0x00080 | |
| #define MPIC_CPU_TASKPRI_MASK 0x0000000f | |
| #define MPIC_CPU_WHOAMI 0x00090 | |
| #define MPIC_CPU_WHOAMI_MASK 0x0000001f | |
| #define MPIC_CPU_INTACK 0x000a0 | |
| #define MPIC_CPU_EOI 0x000b0 | |
| /* | |
| * Per-source registers | |
| */ | |
| #define MPIC_IRQ_BASE 0x10000 | |
| #define MPIC_IRQ_STRIDE 0x00020 | |
| #define MPIC_IRQ_VECTOR_PRI 0x00000 | |
| #define MPIC_VECPRI_MASK 0x80000000 | |
| #define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ | |
| #define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 | |
| #define MPIC_VECPRI_PRIORITY_SHIFT 16 | |
| #define MPIC_VECPRI_VECTOR_MASK 0x000007ff | |
| #define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 | |
| #define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 | |
| #define MPIC_VECPRI_POLARITY_MASK 0x00800000 | |
| #define MPIC_VECPRI_SENSE_LEVEL 0x00400000 | |
| #define MPIC_VECPRI_SENSE_EDGE 0x00000000 | |
| #define MPIC_VECPRI_SENSE_MASK 0x00400000 | |
| #define MPIC_IRQ_DESTINATION 0x00010 | |
| #define MPIC_MAX_IRQ_SOURCES 2048 | |
| #define MPIC_MAX_CPUS 32 | |
| #define MPIC_MAX_ISU 32 | |
| /* | |
| * Special vector numbers (internal use only) | |
| */ | |
| #define MPIC_VEC_SPURRIOUS 255 | |
| #define MPIC_VEC_IPI_3 254 | |
| #define MPIC_VEC_IPI_2 253 | |
| #define MPIC_VEC_IPI_1 252 | |
| #define MPIC_VEC_IPI_0 251 | |
| /* unused */ | |
| #define MPIC_VEC_TIMER_3 250 | |
| #define MPIC_VEC_TIMER_2 249 | |
| #define MPIC_VEC_TIMER_1 248 | |
| #define MPIC_VEC_TIMER_0 247 | |
| /* Type definition of the cascade handler */ | |
| typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data); | |
| #ifdef CONFIG_MPIC_BROKEN_U3 | |
| /* Fixup table entry */ | |
| struct mpic_irq_fixup | |
| { | |
| u8 __iomem *base; | |
| u8 __iomem *applebase; | |
| u32 data; | |
| unsigned int index; | |
| }; | |
| #endif /* CONFIG_MPIC_BROKEN_U3 */ | |
| /* The instance data of a given MPIC */ | |
| struct mpic | |
| { | |
| /* The "linux" controller struct */ | |
| hw_irq_controller hc_irq; | |
| #ifdef CONFIG_SMP | |
| hw_irq_controller hc_ipi; | |
| #endif | |
| const char *name; | |
| /* Flags */ | |
| unsigned int flags; | |
| /* How many irq sources in a given ISU */ | |
| unsigned int isu_size; | |
| unsigned int isu_shift; | |
| unsigned int isu_mask; | |
| /* Offset of irq vector numbers */ | |
| unsigned int irq_offset; | |
| unsigned int irq_count; | |
| /* Offset of ipi vector numbers */ | |
| unsigned int ipi_offset; | |
| /* Number of sources */ | |
| unsigned int num_sources; | |
| /* Number of CPUs */ | |
| unsigned int num_cpus; | |
| /* cascade handler */ | |
| mpic_cascade_t cascade; | |
| void *cascade_data; | |
| unsigned int cascade_vec; | |
| /* senses array */ | |
| unsigned char *senses; | |
| unsigned int senses_count; | |
| #ifdef CONFIG_MPIC_BROKEN_U3 | |
| /* The fixup table */ | |
| struct mpic_irq_fixup *fixups; | |
| spinlock_t fixup_lock; | |
| #endif | |
| /* The various ioremap'ed bases */ | |
| volatile u32 __iomem *gregs; | |
| volatile u32 __iomem *tmregs; | |
| volatile u32 __iomem *cpuregs[MPIC_MAX_CPUS]; | |
| volatile u32 __iomem *isus[MPIC_MAX_ISU]; | |
| /* link */ | |
| struct mpic *next; | |
| }; | |
| /* This is the primary controller, only that one has IPIs and | |
| * has afinity control. A non-primary MPIC always uses CPU0 | |
| * registers only | |
| */ | |
| #define MPIC_PRIMARY 0x00000001 | |
| /* Set this for a big-endian MPIC */ | |
| #define MPIC_BIG_ENDIAN 0x00000002 | |
| /* Broken U3 MPIC */ | |
| #define MPIC_BROKEN_U3 0x00000004 | |
| /* Broken IPI registers (autodetected) */ | |
| #define MPIC_BROKEN_IPI 0x00000008 | |
| /* MPIC wants a reset */ | |
| #define MPIC_WANTS_RESET 0x00000010 | |
| /* Allocate the controller structure and setup the linux irq descs | |
| * for the range if interrupts passed in. No HW initialization is | |
| * actually performed. | |
| * | |
| * @phys_addr: physial base address of the MPIC | |
| * @flags: flags, see constants above | |
| * @isu_size: number of interrupts in an ISU. Use 0 to use a | |
| * standard ISU-less setup (aka powermac) | |
| * @irq_offset: first irq number to assign to this mpic | |
| * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 | |
| * to match the number of sources | |
| * @ipi_offset: first irq number to assign to this mpic IPI sources, | |
| * used only on primary mpic | |
| * @senses: array of sense values | |
| * @senses_num: number of entries in the array | |
| * | |
| * Note about the sense array. If none is passed, all interrupts are | |
| * setup to be level negative unless MPIC_BROKEN_U3 is set in which | |
| * case they are edge positive (and the array is ignored anyway). | |
| * The values in the array start at the first source of the MPIC, | |
| * that is senses[0] correspond to linux irq "irq_offset". | |
| */ | |
| extern struct mpic *mpic_alloc(unsigned long phys_addr, | |
| unsigned int flags, | |
| unsigned int isu_size, | |
| unsigned int irq_offset, | |
| unsigned int irq_count, | |
| unsigned int ipi_offset, | |
| unsigned char *senses, | |
| unsigned int senses_num, | |
| const char *name); | |
| /* Assign ISUs, to call before mpic_init() | |
| * | |
| * @mpic: controller structure as returned by mpic_alloc() | |
| * @isu_num: ISU number | |
| * @phys_addr: physical address of the ISU | |
| */ | |
| extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, | |
| unsigned long phys_addr); | |
| /* Initialize the controller. After this has been called, none of the above | |
| * should be called again for this mpic | |
| */ | |
| extern void mpic_init(struct mpic *mpic); | |
| /* Setup a cascade. Currently, only one cascade is supported this | |
| * way, though you can always do a normal request_irq() and add | |
| * other cascades this way. You should call this _after_ having | |
| * added all the ISUs | |
| * | |
| * @irq_no: "linux" irq number of the cascade (that is offset'ed vector) | |
| * @handler: cascade handler function | |
| */ | |
| extern void mpic_setup_cascade(unsigned int irq_no, mpic_cascade_t hanlder, | |
| void *data); | |
| /* | |
| * All of the following functions must only be used after the | |
| * ISUs have been assigned and the controller fully initialized | |
| * with mpic_init() | |
| */ | |
| /* Change/Read the priority of an interrupt. Default is 8 for irqs and | |
| * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the | |
| * IPI number is then the offset'ed (linux irq number mapped to the IPI) | |
| */ | |
| extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); | |
| extern unsigned int mpic_irq_get_priority(unsigned int irq); | |
| /* Setup a non-boot CPU */ | |
| extern void mpic_setup_this_cpu(void); | |
| /* Clean up for kexec (or cpu offline or ...) */ | |
| extern void mpic_teardown_this_cpu(int secondary); | |
| /* Get the current cpu priority for this cpu (0..15) */ | |
| extern int mpic_cpu_get_priority(void); | |
| /* Set the current cpu priority for this cpu */ | |
| extern void mpic_cpu_set_priority(int prio); | |
| /* Request IPIs on primary mpic */ | |
| extern void mpic_request_ipis(void); | |
| /* Send an IPI (non offseted number 0..3) */ | |
| extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); | |
| /* Send a message (IPI) to a given target (cpu number or MSG_*) */ | |
| void smp_mpic_message_pass(int target, int msg); | |
| /* Fetch interrupt from a given mpic */ | |
| extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs); | |
| /* This one gets to the primary mpic */ | |
| extern int mpic_get_irq(struct pt_regs *regs); | |
| /* global mpic for pSeries */ | |
| extern struct mpic *pSeries_mpic; | |
| #endif /* __KERNEL__ */ | |
| #endif /* _ASM_POWERPC_MPIC_H */ |