drivers/video/Kconfig - linux - Git at Google


            
            #

            
            # Video configuration

            
            #


            menu "Graphics support"


            config FB

            
            	tristate "Support for frame buffer devices"

            
            	---help---

            
            	  The frame buffer device provides an abstraction for the graphics

            
            	  hardware. It represents the frame buffer of some video hardware and

            
            	  allows application software to access the graphics hardware through

            
            	  a well-defined interface, so the software doesn't need to know

            
            	  anything about the low-level (hardware register) stuff.


            	  Frame buffer devices work identically across the different

            
            	  architectures supported by Linux and make the implementation of

            
            	  application programs easier and more portable; at this point, an X

            
            	  server exists which uses the frame buffer device exclusively.

            
            	  On several non-X86 architectures, the frame buffer device is the

            
            	  only way to use the graphics hardware.


            	  The device is accessed through special device nodes, usually located

            
            	  in the /dev directory, i.e. /dev/fb*.


            	  You need an utility program called fbset to make full use of frame

            
            	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>

            
            	  and the Framebuffer-HOWTO at

            
            	  <http://www.tahallah.demon.co.uk/programming/prog.html> for more

            
            	  information.


            	  Say Y here and to the driver for your graphics board below if you

            
            	  are compiling a kernel for a non-x86 architecture.


            	  If you are compiling for the x86 architecture, you can say Y if you

            
            	  want to play with it, but it is not essential. Please note that

            
            	  running graphical applications that directly touch the hardware

            
            	  (e.g. an accelerated X server) and that are not frame buffer

            
            	  device-aware may cause unexpected results. If unsure, say N.


            config FB_CFB_FILLRECT

            
            	tristate

            
            	depends on FB

            
            	default n

            
            	---help---

            
            	  Include the cfb_fillrect function for generic software rectangle

            
            	  filling. This is used by drivers that don't provide their own

            
            	  (accelerated) version.


            config FB_CFB_COPYAREA

            
            	tristate

            
            	depends on FB

            
            	default n

            
            	---help---

            
            	  Include the cfb_copyarea function for generic software area copying.

            
            	  This is used by drivers that don't provide their own (accelerated)

            
            	  version.


            config FB_CFB_IMAGEBLIT

            
            	tristate

            
            	depends on FB

            
            	default n

            
            	---help---

            
            	  Include the cfb_imageblit function for generic software image

            
            	  blitting. This is used by drivers that don't provide their own

            
            	  (accelerated) version.


            config FB_MACMODES

            
                   tristate

            
                   depends on FB

            
                   default n


            config FB_FIRMWARE_EDID

            
                   bool "Enable firmware EDID"

            
                   depends on FB

            
                   default y

            
                   ---help---

            
                     This enables access to the EDID transferred from the firmware.

            
            	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C

            
            	 transfers do not work for your driver and if you are using

            
            	 nvidiafb, i810fb or savagefb.


            	 In general, choosing Y for this option is safe.  If you

            
            	 experience extremely long delays while booting before you get

            
            	 something on your display, try setting this to N.  Matrox cards in

            
            	 combination with certain motherboards and monitors are known to

            
            	 suffer from this problem.


            config FB_MODE_HELPERS

            
                    bool "Enable Video Mode Handling Helpers"

            
                    depends on FB

            
            	default n

            
            	---help---

            
            	  This enables functions for handling video modes using the

            
            	  Generalized Timing Formula and the EDID parser. A few drivers rely

            
                      on this feature such as the radeonfb, rivafb, and the i810fb. If

            
            	  your driver does not take advantage of this feature, choosing Y will

            
            	  just increase the kernel size by about 5K.


            config FB_TILEBLITTING

            
                   bool "Enable Tile Blitting Support"

            
                   depends on FB

            
                   default n

            
                   ---help---

            
                     This enables tile blitting.  Tile blitting is a drawing technique

            
            	 where the screen is divided into rectangular sections (tiles), whereas

            
            	 the standard blitting divides the screen into pixels. Because the

            
            	 default drawing element is a tile, drawing functions will be passed

            
            	 parameters in terms of number of tiles instead of number of pixels.

            
            	 For example, to draw a single character, instead of using bitmaps,

            
            	 an index to an array of bitmaps will be used.  To clear or move a

            
            	 rectangular section of a screen, the rectangle will be described in

            
            	 terms of number of tiles in the x- and y-axis.


            	 This is particularly important to one driver, matroxfb.  If

            
            	 unsure, say N.


            config FB_CIRRUS

            
            	tristate "Cirrus Logic support"

            
            	depends on FB && (ZORRO || PCI)

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	---help---

            
            	  This enables support for Cirrus Logic GD542x/543x based boards on

            
            	  Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.


            	  If you have a PCI-based system, this enables support for these

            
            	  chips: GD-543x, GD-544x, GD-5480.


            	  Please read the file <file:Documentation/fb/cirrusfb.txt>.


            	  Say N unless you have such a graphics board or plan to get one

            
            	  before you next recompile the kernel.


            config FB_PM2

            
            	tristate "Permedia2 support"

            
            	depends on FB && ((AMIGA && BROKEN) || PCI)

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the Permedia2 AGP frame

            
            	  buffer card from ASK, aka `Graphic Blaster Exxtreme'.  There is a

            
            	  product page at

            
            	  <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.


            config FB_PM2_FIFO_DISCONNECT

            
            	bool "enable FIFO disconnect feature"

            
            	depends on FB_PM2 && PCI

            
            	help

            
            	  Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).


            config FB_ARMCLCD

            
            	tristate "ARM PrimeCell PL110 support"

            
            	depends on FB && ARM && ARM_AMBA

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This framebuffer device driver is for the ARM PrimeCell PL110

            
            	  Colour LCD controller.  ARM PrimeCells provide the building

            
            	  blocks for System on a Chip devices.


            	  If you want to compile this as a module (=code which can be

            
            	  inserted into and removed from the running kernel), say M

            
            	  here and read <file:Documentation/modules.txt>.  The module

            
            	  will be called amba-clcd.


            choice


            	depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)

            
            	prompt "LCD Panel"

            
            	default FB_ARMCLCD_SHARP_LQ035Q7DB02


            config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT

            
            	bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"

            
            	help

            
            	  This is an implementation of the Sharp LQ035Q7DB02, a 3.5"

            
            	  color QVGA, HRTFT panel.  The LogicPD device includes an

            
            	  an integrated HRTFT controller IC.

            
            	  The native resolution is 240x320.


            config FB_ARMCLCD_SHARP_LQ057Q3DC02

            
            	bool "LogicPD LCD 5.7\" QVGA"

            
            	help

            
            	  This is an implementation of the Sharp LQ057Q3DC02, a 5.7"

            
            	  color QVGA, TFT panel.  The LogicPD device includes an

            
            	  The native resolution is 320x240.


            config FB_ARMCLCD_SHARP_LQ64D343

            
            	bool "LogicPD LCD 6.4\" VGA"

            
            	help

            
            	  This is an implementation of the Sharp LQ64D343, a 6.4"

            
            	  color VGA, TFT panel.  The LogicPD device includes an

            
            	  The native resolution is 640x480.


            config FB_ARMCLCD_SHARP_LQ10D368

            
            	bool "LogicPD LCD 10.4\" VGA"

            
            	help

            
            	  This is an implementation of the Sharp LQ10D368, a 10.4"

            
            	  color VGA, TFT panel.  The LogicPD device includes an

            
            	  The native resolution is 640x480.


            config FB_ARMCLCD_SHARP_LQ121S1DG41

            
            	bool "LogicPD LCD 12.1\" SVGA"

            
            	help

            
            	  This is an implementation of the Sharp LQ121S1DG41, a 12.1"

            
            	  color SVGA, TFT panel.  The LogicPD device includes an

            
            	  The native resolution is 800x600.


            	  This panel requires a clock rate may be an integer fraction

            
            	  of the base LCDCLK frequency.  The driver will select the

            
            	  highest frequency available that is lower than the maximum

            
            	  allowed.  The panel may flicker if the clock rate is

            
            	  slower than the recommended minimum.


            config FB_ARMCLCD_AUO_A070VW01_WIDE

            
            	bool "AU Optronics A070VW01 LCD 7.0\" WIDE"

            
            	help

            
            	  This is an implementation of the AU Optronics, a 7.0"

            
            	  WIDE Color.  The native resolution is 234x480.


            config FB_ARMCLCD_HITACHI

            
            	bool "Hitachi Wide Screen 800x480"

            
            	help

            
            	  This is an implementation of the Hitachi 800x480.


            endchoice


            config FB_ACORN

            
            	bool "Acorn VIDC support"

            
            	depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the Acorn VIDC graphics

            
            	  hardware found in Acorn RISC PCs and other ARM-based machines.  If

            
            	  unsure, say N.


            config FB_CLPS711X

            
            	bool "CLPS711X LCD support"

            
            	depends on (FB = y) && ARM && ARCH_CLPS711X

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  Say Y to enable the Framebuffer driver for the CLPS7111 and

            
            	  EP7212 processors.


            config FB_SA1100

            
            	bool "SA-1100 LCD support"

            
            	depends on (FB = y) && ARM && ARCH_SA1100

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is a framebuffer device for the SA-1100 LCD Controller.

            
            	  See <http://www.linux-fbdev.org/> for information on framebuffer

            
            	  devices.


            	  If you plan to use the LCD display with your SA-1100 system, say

            
            	  Y here.


            config FB_IMX

            
            	tristate "Motorola i.MX LCD support"

            
            	depends on FB && ARM && ARCH_IMX

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT


            config FB_CYBER2000

            
            	tristate "CyberPro 2000/2010/5000 support"

            
            	depends on FB && PCI && (BROKEN || !SPARC64)

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This enables support for the Integraphics CyberPro 20x0 and 5000

            
            	  VGA chips used in the Rebel.com Netwinder and other machines.

            
            	  Say Y if you have a NetWinder or a graphics card containing this

            
            	  device, otherwise say N.


            config FB_APOLLO

            
            	bool

            
            	depends on (FB = y) && APOLLO

            
            	default y

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_IMAGEBLIT


            config FB_Q40

            
            	bool

            
            	depends on (FB = y) && Q40

            
            	default y

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT


            config FB_AMIGA

            
            	tristate "Amiga native chipset support"

            
            	depends on FB && AMIGA

            
            	help

            
            	  This is the frame buffer device driver for the builtin graphics

            
            	  chipset found in Amigas.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called amifb.


            config FB_AMIGA_OCS

            
            	bool "Amiga OCS chipset support"

            
            	depends on FB_AMIGA

            
            	help

            
            	  This enables support for the original Agnus and Denise video chips,

            
            	  found in the Amiga 1000 and most A500's and A2000's. If you intend

            
            	  to run Linux on any of these systems, say Y; otherwise say N.


            config FB_AMIGA_ECS

            
            	bool "Amiga ECS chipset support"

            
            	depends on FB_AMIGA

            
            	help

            
            	  This enables support for the Enhanced Chip Set, found in later

            
            	  A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If

            
            	  you intend to run Linux on any of these systems, say Y; otherwise

            
            	  say N.


            config FB_AMIGA_AGA

            
            	bool "Amiga AGA chipset support"

            
            	depends on FB_AMIGA

            
            	help

            
            	  This enables support for the Advanced Graphics Architecture (also

            
            	  known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T

            
            	  and CD32. If you intend to run Linux on any of these systems, say Y;

            
            	  otherwise say N.


            config FB_CYBER

            
            	tristate "Amiga CyberVision 64 support"

            
            	depends on FB && ZORRO && BROKEN

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This enables support for the Cybervision 64 graphics card from

            
            	  Phase5. Please note that its use is not all that intuitive (i.e. if

            
            	  you have any questions, be sure to ask!). Say N unless you have a

            
            	  Cybervision 64 or plan to get one before you next recompile the

            
            	  kernel. Please note that this driver DOES NOT support the

            
            	  Cybervision 64/3D card, as they use incompatible video chips.


            config FB_VIRGE

            
            	bool "Amiga CyberVision 64/3D support "

            
            	depends on (FB = y) && ZORRO && BROKEN

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This enables support for the Cybervision 64/3D graphics card from

            
            	  Phase5. Please note that its use is not all that intuitive (i.e. if

            
            	  you have any questions, be sure to ask!). Say N unless you have a

            
            	  Cybervision 64/3D or plan to get one before you next recompile the

            
            	  kernel. Please note that this driver DOES NOT support the older

            
            	  Cybervision 64 card, as they use incompatible video chips.


            config FB_RETINAZ3

            
            	tristate "Amiga Retina Z3 support"

            
            	depends on (FB = y) && ZORRO && BROKEN

            
            	help

            
            	  This enables support for the Retina Z3 graphics card. Say N unless

            
            	  you have a Retina Z3 or plan to get one before you next recompile

            
            	  the kernel.


            config FB_FM2

            
            	bool "Amiga FrameMaster II/Rainbow II support"

            
            	depends on (FB = y) && ZORRO

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the Amiga FrameMaster

            
            	  card from BSC (exhibited 1992 but not shipped as a CBM product).


            config FB_ARC

            
            	tristate "Arc Monochrome LCD board support"

            
            	depends on FB && X86

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This enables support for the Arc Monochrome LCD board. The board

            
            	  is based on the KS-108 lcd controller and is typically a matrix

            
            	  of 2*n chips. This driver was tested with a 128x64 panel. This

            
            	  driver supports it for use with x86 SBCs through a 16 bit GPIO

            
            	  interface (8 bit data, 8 bit control). If you anticpate using

            
            	  this driver, say Y or M; otherwise say N. You must specify the

            
            	  GPIO IO address to be used for setting control and data.


            config FB_ATARI

            
            	bool "Atari native chipset support"

            
            	depends on (FB = y) && ATARI && BROKEN

            
            	help

            
            	  This is the frame buffer device driver for the builtin graphics

            
            	  chipset found in Ataris.


            config FB_OF

            
            	bool "Open Firmware frame buffer device support"

            
            	depends on (FB = y) && (PPC64 || PPC_OF)

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	select FB_MACMODES

            
            	help

            
            	  Say Y if you want support with Open Firmware for your graphics

            
            	  board.


            config FB_CONTROL

            
            	bool "Apple \"control\" display support"

            
            	depends on (FB = y) && PPC_PMAC

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	select FB_MACMODES

            
            	help

            
            	  This driver supports a frame buffer for the graphics adapter in the

            
            	  Power Macintosh 7300 and others.


            config FB_PLATINUM

            
            	bool "Apple \"platinum\" display support"

            
            	depends on (FB = y) && PPC_PMAC

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	select FB_MACMODES

            
            	help

            
            	  This driver supports a frame buffer for the "platinum" graphics

            
            	  adapter in some Power Macintoshes.


            config FB_VALKYRIE

            
            	bool "Apple \"valkyrie\" display support"

            
            	depends on (FB = y) && (MAC || PPC_PMAC)

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	select FB_MACMODES

            
            	help

            
            	  This driver supports a frame buffer for the "valkyrie" graphics

            
            	  adapter in some Power Macintoshes.


            config FB_CT65550

            
            	bool "Chips 65550 display support"

            
            	depends on (FB = y) && PPC

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the Chips & Technologies

            
            	  65550 graphics chip in PowerBooks.


            config FB_ASILIANT

            
            	bool "Asiliant (Chips) 69000 display support"

            
            	depends on (FB = y) && PCI

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the Asiliant 69030 chipset


            config FB_IMSTT

            
            	bool "IMS Twin Turbo display support"

            
            	depends on (FB = y) && PCI

            
            	select FB_CFB_IMAGEBLIT

            
            	select FB_MACMODES if PPC

            
            	help

            
            	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with

            
            	  many Macintosh and compatible computers.


            config FB_VGA16

            
            	tristate "VGA 16-color graphics support"

            
            	depends on FB && (X86 || PPC)

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for VGA 16 color graphic

            
            	  cards. Say Y if you have such a card.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called vga16fb.


            config FB_STI

            
            	tristate "HP STI frame buffer device support"

            
            	depends on FB && PARISC

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	default y

            
            	---help---

            
            	  STI refers to the HP "Standard Text Interface" which is a set of

            
            	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.

            
            	  Enabling this option will implement the linux framebuffer device

            
            	  using calls to the STI BIOS routines for initialisation.


            	  If you enable this option, you will get a planar framebuffer device

            
            	  /dev/fb which will work on the most common HP graphic cards of the

            
            	  NGLE family, including the artist chips (in the 7xx and Bxxx series),

            
            	  HCRX, HCRX24, CRX, CRX24 and VisEG series.


            	  It is safe to enable this option, so you should probably say "Y".


            config FB_MAC

            
            	bool "Generic Macintosh display support"

            
            	depends on (FB = y) && MAC

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	select FB_MACMODES


            #      bool '  Apple DAFB display support' CONFIG_FB_DAFB

            
            config FB_HP300

            
            	bool

            
            	depends on (FB = y) && HP300

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_IMAGEBLIT

            
            	default y


            config FB_TGA

            
            	tristate "TGA framebuffer support"

            
            	depends on FB && ALPHA

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for generic TGA graphic

            
            	  cards. Say Y if you have one of those.


            config FB_VESA

            
            	bool "VESA VGA graphics support"

            
            	depends on (FB = y) && X86

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for generic VESA 2.0

            
            	  compliant graphic cards. The older VESA 1.2 cards are not supported.

            
            	  You will get a boot time penguin logo at no additional cost. Please

            
            	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.


            config VIDEO_SELECT

            
            	bool

            
            	depends on FB_VESA

            
            	default y


            config FB_HGA

            
            	tristate "Hercules mono graphics support"

            
            	depends on FB && X86

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  Say Y here if you have a Hercules mono graphics card.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called hgafb.


            	  As this card technology is 15 years old, most people will answer N

            
            	  here.


            config FB_HGA_ACCEL

            
            	bool "Hercules mono Acceleration functions (EXPERIMENTAL)"

            
            	depends on FB_HGA && EXPERIMENTAL

            
            	---help---

            
            	This will compile the Hercules mono graphics with

            
            	acceleration functions.


            config VIDEO_SELECT

            
            	bool

            
            	depends on (FB = y) && X86

            
            	default y


            config FB_SGIVW

            
            	tristate "SGI Visual Workstation framebuffer support"

            
            	depends on FB && X86_VISWS

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  SGI Visual Workstation support for framebuffer graphics.


            config FB_GBE

            
            	bool "SGI Graphics Backend frame buffer support"

            
            	depends on (FB = y) && (SGI_IP32 || X86_VISWS)

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
             	help

            
            	  This is the frame buffer device driver for SGI Graphics Backend.

            
            	  This chip is used in SGI O2 and Visual Workstation 320/540.


            config FB_GBE_MEM

            
            	int "Video memory size in MB"

            
            	depends on FB_GBE

            
            	default 4

            
            	help

            
            	  This is the amount of memory reserved for the framebuffer,

            
            	  which can be any value between 1MB and 8MB.


            config FB_SUN3

            
            	bool "Sun3 framebuffer support"

            
            	depends on (FB = y) && (SUN3 || SUN3X) && BROKEN


            config FB_SBUS

            
            	bool "SBUS and UPA framebuffers"

            
            	depends on (FB = y) && SPARC

            
            	help

            
            	  Say Y if you want support for SBUS or UPA based frame buffer device.


            config FB_BW2

            
            	bool "BWtwo support"

            
            	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the BWtwo frame buffer.


            config FB_CG3

            
            	bool "CGthree support"

            
            	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the CGthree frame buffer.


            config FB_CG6

            
            	bool "CGsix (GX,TurboGX) support"

            
            	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the CGsix (GX, TurboGX)

            
            	  frame buffer.


            config FB_PVR2

            
            	tristate "NEC PowerVR 2 display support"

            
            	depends on FB && SH_DREAMCAST

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	---help---

            
            	  Say Y here if you have a PowerVR 2 card in your box.  If you plan to

            
            	  run linux on your Dreamcast, you will have to say Y here.

            
            	  This driver may or may not work on other PowerVR 2 cards, but is

            
            	  totally untested.  Use at your own risk.  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called pvr2fb.


            	  You can pass several parameters to the driver at boot time or at

            
            	  module load time.  The parameters look like "video=pvr2:XXX", where

            
            	  the meaning of XXX can be found at the end of the main source file

            
            	  (<file:drivers/video/pvr2fb.c>). Please see the file

            
            	  <file:Documentation/fb/pvr2fb.txt>.


            config FB_EPSON1355

            
            	bool "Epson 1355 framebuffer support"

            
            	depends on (FB = y) && (SUPERH || ARCH_CEIVA)

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  Build in support for the SED1355 Epson Research Embedded RAMDAC

            
            	  LCD/CRT Controller (since redesignated as the S1D13505) as a

            
            	  framebuffer.  Product specs at

            
            	  <http://www.erd.epson.com/vdc/html/products.htm>.


            config FB_S1D13XXX

            
            	tristate "Epson S1D13XXX framebuffer support"

            
            	depends on FB

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  Support for S1D13XXX framebuffer device family (currently only

            
            	  working with S1D13806). Product specs at

            
            	  <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>


            config FB_NVIDIA

            
            	tristate "nVidia Framebuffer Support"

            
            	depends on FB && PCI

            
            	select I2C_ALGOBIT if FB_NVIDIA_I2C

            
            	select I2C if FB_NVIDIA_I2C

            
            	select FB_MODE_HELPERS

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This driver supports graphics boards with the nVidia chips, TNT

            
            	  and newer. For very old chipsets, such as the RIVA128, then use

            
            	  the rivafb.

            
            	  Say Y if you have such a graphics board.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called nvidiafb.


            config FB_NVIDIA_I2C

            
                   bool "Enable DDC Support"

            
                   depends on FB_NVIDIA

            
                   help

            
            	  This enables I2C support for nVidia Chipsets.  This is used

            
            	  only for getting EDID information from the attached display

            
            	  allowing for robust video mode handling and switching.


            	  Because fbdev-2.6 requires that drivers must be able to

            
            	  independently validate video mode parameters, you should say Y

            
            	  here.


            config FB_RIVA

            
            	tristate "nVidia Riva support"

            
            	depends on FB && PCI

            
            	select I2C_ALGOBIT if FB_RIVA_I2C

            
            	select I2C if FB_RIVA_I2C

            
            	select FB_MODE_HELPERS

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This driver supports graphics boards with the nVidia Riva/Geforce

            
            	  chips.

            
            	  Say Y if you have such a graphics board.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called rivafb.


            config FB_RIVA_I2C

            
                   bool "Enable DDC Support"

            
                   depends on FB_RIVA

            
                   help

            
            	  This enables I2C support for nVidia Chipsets.  This is used

            
            	  only for getting EDID information from the attached display

            
            	  allowing for robust video mode handling and switching.


            	  Because fbdev-2.6 requires that drivers must be able to

            
            	  independently validate video mode parameters, you should say Y

            
            	  here.


            config FB_RIVA_DEBUG

            
            	bool "Lots of debug output from Riva(nVidia) driver"

            
            	depends on FB_RIVA

            
            	default n

            
            	help

            
            	  Say Y here if you want the Riva driver to output all sorts

            
            	  of debugging informations to provide to the maintainer when

            
            	  something goes wrong.


            config FB_I810

            
            	tristate "Intel 810/815 support (EXPERIMENTAL)"

            
            	depends on FB && EXPERIMENTAL && PCI && X86_32

            
            	select AGP

            
            	select AGP_INTEL

            
            	select FB_MODE_HELPERS

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This driver supports the on-board graphics built in to the Intel 810

            
                      and 815 chipsets.  Say Y if you have and plan to use such a board.


                      To compile this driver as a module, choose M here: the

            
            	  module will be called i810fb.


                      For more information, please read

            
            	  <file:Documentation/fb/intel810.txt>


            config FB_I810_GTF

            
            	bool "use VESA Generalized Timing Formula"

            
            	depends on FB_I810

            
            	help

            
            	  If you say Y, then the VESA standard, Generalized Timing Formula

            
                      or GTF, will be used to calculate the required video timing values

            
            	  per video mode.  Since the GTF allows nondiscrete timings

            
                      (nondiscrete being a range of values as opposed to discrete being a

            
                      set of values), you'll be able to use any combination of horizontal

            
            	  and vertical resolutions, and vertical refresh rates without having

            
            	  to specify your own timing parameters.  This is especially useful

            
            	  to maximize the performance of an aging display, or if you just

            
                      have a display with nonstandard dimensions. A VESA compliant

            
            	  monitor is recommended, but can still work with non-compliant ones.

            
            	  If you need or want this, then select this option. The timings may

            
            	  not be compliant with Intel's recommended values. Use at your own

            
            	  risk.


                      If you say N, the driver will revert to discrete video timings

            
            	  using a set recommended by Intel in their documentation.


                      If unsure, say N.


            config FB_I810_I2C

            
            	bool "Enable DDC Support"

            
            	depends on FB_I810 && FB_I810_GTF

            
            	select I2C

            
            	select I2C_ALGOBIT

            
            	help


            config FB_INTEL

            
            	tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"

            
            	depends on FB && EXPERIMENTAL && PCI && X86

            
            	select AGP

            
            	select AGP_INTEL

            
            	select FB_MODE_HELPERS

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This driver supports the on-board graphics built in to the Intel

            
                      830M/845G/852GM/855GM/865G chipsets.

            
                      Say Y if you have and plan to use such a board.


                      To compile this driver as a module, choose M here: the

            
            	  module will be called intelfb.


            config FB_INTEL_DEBUG

            
                    bool "Intel driver Debug Messages"

            
            	depends on FB_INTEL

            
            	---help---

            
            	  Say Y here if you want the Intel driver to output all sorts

            
            	  of debugging informations to provide to the maintainer when

            
            	  something goes wrong.


            config FB_MATROX

            
            	tristate "Matrox acceleration"

            
            	depends on FB && PCI

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	select FB_TILEBLITTING

            
            	select FB_MACMODES if PPC_PMAC

            
            	---help---

            
            	  Say Y here if you have a Matrox Millennium, Matrox Millennium II,

            
            	  Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox

            
            	  Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,

            
            	  Matrox G400, G450 or G550 card in your box.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called matroxfb.


            	  You can pass several parameters to the driver at boot time or at

            
            	  module load time. The parameters look like "video=matrox:XXX", and

            
            	  are described in <file:Documentation/fb/matroxfb.txt>.


            config FB_MATROX_MILLENIUM

            
            	bool "Millennium I/II support"

            
            	depends on FB_MATROX

            
            	help

            
            	  Say Y here if you have a Matrox Millennium or Matrox Millennium II

            
            	  video card. If you select "Advanced lowlevel driver options" below,

            
            	  you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp

            
            	  packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can

            
            	  also use font widths different from 8.


            config FB_MATROX_MYSTIQUE

            
            	bool "Mystique support"

            
            	depends on FB_MATROX

            
            	help

            
            	  Say Y here if you have a Matrox Mystique or Matrox Mystique 220

            
            	  video card. If you select "Advanced lowlevel driver options" below,

            
            	  you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp

            
            	  packed pixel and 32 bpp packed pixel. You can also use font widths

            
            	  different from 8.


            config FB_MATROX_G

            
            	bool "G100/G200/G400/G450/G550 support"

            
            	depends on FB_MATROX

            
            	---help---

            
            	  Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based

            
            	  video card. If you select "Advanced lowlevel driver options", you

            
            	  should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed

            
            	  pixel and 32 bpp packed pixel. You can also use font widths

            
            	  different from 8.


            	  If you need support for G400 secondary head, you must first say Y to

            
            	  "I2C support" in the character devices section, and then to

            
            	  "Matrox I2C support" and "G400 second head support" here in the

            
            	  framebuffer section. G450/G550 secondary head and digital output

            
            	  are supported without additional modules.


            	  The driver starts in monitor mode. You must use the matroxset tool

            
            	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to

            
            	  swap primary and secondary head outputs, or to change output mode.

            
            	  Secondary head driver always start in 640x480 resolution and you

            
            	  must use fbset to change it.


            	  Do not forget that second head supports only 16 and 32 bpp

            
            	  packed pixels, so it is a good idea to compile them into the kernel

            
            	  too. You can use only some font widths, as the driver uses generic

            
            	  painting procedures (the secondary head does not use acceleration

            
            	  engine).


            	  G450/G550 hardware can display TV picture only from secondary CRTC,

            
            	  and it performs no scaling, so picture must have 525 or 625 lines.


            config FB_MATROX_I2C

            
            	tristate "Matrox I2C support"

            
            	depends on FB_MATROX && I2C

            
            	select I2C_ALGOBIT

            
            	---help---

            
            	  This drivers creates I2C buses which are needed for accessing the

            
            	  DDC (I2C) bus present on all Matroxes, an I2C bus which

            
            	  interconnects Matrox optional devices, like MGA-TVO on G200 and

            
            	  G400, and the secondary head DDC bus, present on G400 only.


            	  You can say Y or M here if you want to experiment with monitor

            
            	  detection code. You must say Y or M here if you want to use either

            
            	  second head of G400 or MGA-TVO on G200 or G400.


            	  If you compile it as module, it will create a module named

            
            	  i2c-matroxfb.


            config FB_MATROX_MAVEN

            
            	tristate "G400 second head support"

            
            	depends on FB_MATROX_G && FB_MATROX_I2C

            
            	---help---

            
            	  WARNING !!! This support does not work with G450 !!!


            	  Say Y or M here if you want to use a secondary head (meaning two

            
            	  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary

            
            	  head is not compatible with accelerated XFree 3.3.x SVGA servers -

            
            	  secondary head output is blanked while you are in X. With XFree

            
            	  3.9.17 preview you can use both heads if you use SVGA over fbdev or

            
            	  the fbdev driver on first head and the fbdev driver on second head.


            	  If you compile it as module, two modules are created,

            
            	  matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for

            
            	  both G200 and G400, matroxfb_crtc2 is needed only by G400. You must

            
            	  also load i2c-matroxfb to get it to run.


            	  The driver starts in monitor mode and you must use the matroxset

            
            	  tool (available at

            
            	  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to

            
            	  PAL or NTSC or to swap primary and secondary head outputs.

            
            	  Secondary head driver also always start in 640x480 resolution, you

            
            	  must use fbset to change it.


            	  Also do not forget that second head supports only 16 and 32 bpp

            
            	  packed pixels, so it is a good idea to compile them into the kernel

            
            	  too.  You can use only some font widths, as the driver uses generic

            
            	  painting procedures (the secondary head does not use acceleration

            
            	  engine).


            config FB_MATROX_MULTIHEAD

            
            	bool "Multihead support"

            
            	depends on FB_MATROX

            
            	---help---

            
            	  Say Y here if you have more than one (supported) Matrox device in

            
            	  your computer and you want to use all of them for different monitors

            
            	  ("multihead"). If you have only one device, you should say N because

            
            	  the driver compiled with Y is larger and a bit slower, especially on

            
            	  ia32 (ix86).


            	  If you said M to "Matrox unified accelerated driver" and N here, you

            
            	  will still be able to use several Matrox devices simultaneously:

            
            	  insert several instances of the module matroxfb into the kernel

            
            	  with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.

            
            	  for the different Matrox devices. This method is slightly faster but

            
            	  uses 40 KB of kernel memory per Matrox card.


            	  There is no need for enabling 'Matrox multihead support' if you have

            
            	  only one Matrox card in the box.


            config FB_RADEON

            
            	tristate "ATI Radeon display support"

            
            	depends on FB && PCI

            
            	select I2C_ALGOBIT if FB_RADEON_I2C

            
            	select I2C if FB_RADEON_I2C

            
            	select FB_MODE_HELPERS

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	select FB_MACMODES if PPC_OF

            
            	help

            
            	  Choose this option if you want to use an ATI Radeon graphics card as

            
            	  a framebuffer device.  There are both PCI and AGP versions.  You

            
            	  don't need to choose this to run the Radeon in plain VGA mode.


            	  If you say Y here and want DDC/I2C support you must first say Y to

            
            	  "I2C support" and "I2C bit-banging support" in the character devices

            
            	  section.


            	  If you say M here then "I2C support" and "I2C bit-banging support"

            
            	  can be build either as modules or built-in.


            	  There is a product page at

            
            	  http://apps.ati.com/ATIcompare/

            
            config FB_RADEON_I2C

            
            	bool "DDC/I2C for ATI Radeon support"

            
            	depends on FB_RADEON

            
            	default y

            
            	help

            
            	  Say Y here if you want DDC/I2C support for your Radeon board.


            config FB_RADEON_DEBUG

            
            	bool "Lots of debug output from Radeon driver"

            
            	depends on FB_RADEON

            
            	default n

            
            	help

            
            	  Say Y here if you want the Radeon driver to output all sorts

            
            	  of debugging informations to provide to the maintainer when

            
            	  something goes wrong.


            config FB_ATY128

            
            	tristate "ATI Rage128 display support"

            
            	depends on FB && PCI

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	select FB_MACMODES if PPC_PMAC

            
            	help

            
            	  This driver supports graphics boards with the ATI Rage128 chips.

            
            	  Say Y if you have such a graphics board and read

            
            	  <file:Documentation/fb/aty128fb.txt>.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called aty128fb.


            config FB_ATY

            
            	tristate "ATI Mach64 display support" if PCI || ATARI

            
            	depends on FB && !SPARC32

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	select FB_MACMODES if PPC

            
            	help

            
            	  This driver supports graphics boards with the ATI Mach64 chips.

            
            	  Say Y if you have such a graphics board.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called atyfb.


            config FB_ATY_CT

            
            	bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"

            
            	depends on PCI && FB_ATY

            
            	default y if SPARC64 && FB_PCI

            
            	help

            
            	  Say Y here to support use of ATI's 64-bit Rage boards (or other

            
            	  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a

            
            	  framebuffer device.  The ATI product support page for these boards

            
            	  is at <http://support.ati.com/products/pc/mach64/>.


            config FB_ATY_GENERIC_LCD

            
            	bool "Mach64 generic LCD support (EXPERIMENTAL)"

            
            	depends on FB_ATY_CT

            
            	help

            
            	  Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,

            
            	  Rage XC, or Rage XL chipset.


            config FB_ATY_GX

            
            	bool "Mach64 GX support" if PCI

            
            	depends on FB_ATY

            
            	default y if ATARI

            
            	help

            
            	  Say Y here to support use of the ATI Mach64 Graphics Expression

            
            	  board (or other boards based on the Mach64 GX chipset) as a

            
            	  framebuffer device.  The ATI product support page for these boards

            
            	  is at

            
            	  <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.


            config FB_S3TRIO

            
            	bool "S3 Trio display support"

            
            	depends on (FB = y) && PPC && BROKEN

            
            	help

            
            	  If you have a S3 Trio say Y. Say N for S3 Virge.


            config FB_SAVAGE

            
            	tristate "S3 Savage support"

            
            	depends on FB && PCI && EXPERIMENTAL

            
            	select I2C_ALGOBIT if FB_SAVAGE_I2C

            
            	select I2C if FB_SAVAGE_I2C

            
            	select FB_MODE_HELPERS

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This driver supports notebooks and computers with S3 Savage PCI/AGP

            
            	  chips.


            	  Say Y if you have such a graphics card.


            	  To compile this driver as a module, choose M here; the module

            
            	  will be called savagefb.


            config FB_SAVAGE_I2C

            
                   bool "Enable DDC2 Support"

            
                   depends on FB_SAVAGE

            
                   help

            
            	  This enables I2C support for S3 Savage Chipsets.  This is used

            
            	  only for getting EDID information from the attached display

            
            	  allowing for robust video mode handling and switching.


            	  Because fbdev-2.6 requires that drivers must be able to

            
            	  independently validate video mode parameters, you should say Y

            
            	  here.


            config FB_SAVAGE_ACCEL

            
                   bool "Enable Console Acceleration"

            
                   depends on FB_SAVAGE

            
                   default n

            
                   help

            
                      This option will compile in console acceleration support. If

            
                      the resulting framebuffer console has bothersome glitches, then

            
                      choose N here.


            config FB_SIS

            
            	tristate "SiS/XGI display support"

            
            	depends on FB && PCI

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the SiS 300, 315, 330

            
            	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.

            
            	  Specs available at <http://www.sis.com> and <http://www.xgitech.com>.


            	  To compile this driver as a module, choose M here; the module

            
            	  will be called sisfb.


            config FB_SIS_300

            
            	bool "SiS 300 series support"

            
            	depends on FB_SIS

            
            	help

            
            	  Say Y here to support use of the SiS 300/305, 540, 630 and 730.


            config FB_SIS_315

            
            	bool "SiS 315/330/340 series and XGI support"

            
            	depends on FB_SIS

            
            	help

            
            	  Say Y here to support use of the SiS 315, 330 and 340 series

            
            	  (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well

            
            	  as XGI V3XT, V5, V8 and Z7.


            config FB_NEOMAGIC

            
            	tristate "NeoMagic display support"

            
            	depends on FB && PCI

            
            	select FB_MODE_HELPERS

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This driver supports notebooks with NeoMagic PCI chips.

            
            	  Say Y if you have such a graphics card.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called neofb.


            config FB_KYRO

            
            	tristate "IMG Kyro support"

            
            	depends on FB && PCI

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  Say Y here if you have a STG4000 / Kyro / PowerVR 3 based

            
            	  graphics board.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called kyrofb.


            config FB_3DFX

            
            	tristate "3Dfx Banshee/Voodoo3 display support"

            
            	depends on FB && PCI

            
            	select FB_CFB_IMAGEBLIT

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	help

            
            	  This driver supports graphics boards with the 3Dfx Banshee/Voodoo3

            
            	  chips. Say Y if you have such a graphics board.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called tdfxfb.


            config FB_3DFX_ACCEL

            
            	bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"

            
            	depends on FB_3DFX && EXPERIMENTAL

            
            	---help---

            
            	This will compile the 3Dfx Banshee/Voodoo3 frame buffer device

            
            	with acceleration functions.


            config FB_VOODOO1

            
            	tristate "3Dfx Voodoo Graphics (sst1) support"

            
            	depends on FB && PCI

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	---help---

            
            	  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or

            
            	  Voodoo2 (cvg) based graphics card.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called sstfb.


            	  WARNING: Do not use any application that uses the 3D engine

            
            	  (namely glide) while using this driver.

            
            	  Please read the <file:Documentation/fb/README-sstfb.txt> for supported

            
            	  options and other important info  support.


            config FB_CYBLA

            
            	tristate "Cyberblade/i1 support"

            
            	depends on FB && PCI && X86_32 && !64BIT

            
            	select FB_CFB_IMAGEBLIT

            
            	select VIDEO_SELECT

            
            	---help---

            
            	  This driver is supposed to support the Trident Cyberblade/i1

            
            	  graphics core integrated in the VIA VT8601A North Bridge,

            
            	  also known as VIA Apollo PLE133.


            	  Status:

            
            	   - Developed, tested and working on EPIA 5000 and EPIA 800.

            
            	   - Does work reliable on all systems with CRT/LCD connected to

            
            	     normal VGA ports.

            
            	   - Should work on systems that do use the internal LCD port, but

            
            	     this is absolutely not tested.


            	  Character imageblit, copyarea and rectangle fill are hw accelerated,

            
            	  ypan scrolling is used by default.


            	  Please do read <file:Documentation/fb/cyblafb/*>.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called cyblafb.


            config FB_TRIDENT

            
            	tristate "Trident support"

            
            	depends on FB && PCI

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	---help---

            
            	  This driver is supposed to support graphics boards with the

            
            	  Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops

            
            	  but also on some motherboards. For more information, read

            
            	  <file:Documentation/fb/tridentfb.txt>


            	  Cyberblade/i1 support will be removed soon, use the cyblafb driver

            
            	  instead.


            	  Say Y if you have such a graphics board.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called tridentfb.


            config FB_TRIDENT_ACCEL

            
            	bool "Trident Acceleration functions (EXPERIMENTAL)"

            
            	depends on FB_TRIDENT && EXPERIMENTAL

            
            	---help---

            
            	This will compile the Trident frame buffer device with

            
            	acceleration functions.


            config FB_PM3

            
            	tristate "Permedia3 support"

            
            	depends on FB && PCI && BROKEN

            
            	help

            
            	  This is the frame buffer device driver for the 3DLabs Permedia3

            
            	  chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &

            
            	  similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000

            
            	  and maybe other boards.


            config FB_AU1100

            
            	bool "Au1100 LCD Driver"

            
            	depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y


            config FB_AU1200

            
            	bool "Au1200 LCD Driver"

            
            	depends on FB && MIPS && SOC_AU1200

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the framebuffer driver for the AMD Au1200 SOC.  It can drive

            
            	  various panels and CRTs by passing in kernel cmd line option

            
            	  au1200fb:panel=<name>.


            source "drivers/video/geode/Kconfig"


            config FB_FFB

            
            	bool "Creator/Creator3D/Elite3D support"

            
            	depends on FB_SBUS && SPARC64

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the Creator, Creator3D,

            
            	  and Elite3D graphics boards.


            config FB_TCX

            
            	bool "TCX (SS4/SS5 only) support"

            
            	depends on FB_SBUS

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the TCX 24/8bit frame

            
            	  buffer.


            config FB_CG14

            
            	bool "CGfourteen (SX) support"

            
            	depends on FB_SBUS

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the CGfourteen frame

            
            	  buffer on Desktop SPARCsystems with the SX graphics option.


            config FB_P9100

            
            	bool "P9100 (Sparcbook 3 only) support"

            
            	depends on FB_SBUS

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the P9100 card

            
            	  supported on Sparcbook 3 machines.


            config FB_LEO

            
            	bool "Leo (ZX) support"

            
            	depends on FB_SBUS

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the SBUS-based Sun ZX

            
            	  (leo) frame buffer cards.


            config FB_PCI

            
            	bool "PCI framebuffers"

            
            	depends on (FB = y) && PCI && SPARC


            config FB_IGA

            
            	bool "IGA 168x display support"

            
            	depends on SPARC32 && FB_PCI

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the framebuffer device for the INTERGRAPHICS 1680 and

            
            	  successor frame buffer cards.


            config FB_HIT

            
            	tristate "HD64461 Frame Buffer support"

            
            	depends on FB && HD64461

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  This is the frame buffer device driver for the Hitachi HD64461 LCD

            
            	  frame buffer card.


            config FB_PMAG_AA

            
            	bool "PMAG-AA TURBOchannel framebuffer support"

            
            	depends on (FB = y) && TC

            
             	select FB_CFB_FILLRECT

            
             	select FB_CFB_COPYAREA

            
             	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)

            
            	  used mainly in the MIPS-based DECstation series.


            config FB_PMAG_BA

            
            	bool "PMAG-BA TURBOchannel framebuffer support"

            
            	depends on (FB = y) && TC

            
             	select FB_CFB_FILLRECT

            
             	select FB_CFB_COPYAREA

            
             	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)

            
            	  used mainly in the MIPS-based DECstation series.


            config FB_PMAGB_B

            
            	bool "PMAGB-B TURBOchannel framebuffer support"

            
            	depends on (FB = y) && TC

            
             	select FB_CFB_FILLRECT

            
             	select FB_CFB_COPYAREA

            
             	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly

            
            	  in the MIPS-based DECstation series. The card is currently only

            
            	  supported in 1280x1024x8 mode.


            config FB_MAXINE

            
            	bool "Maxine (Personal DECstation) onboard framebuffer support"

            
            	depends on (FB = y) && MACH_DECSTATION

            
             	select FB_CFB_FILLRECT

            
             	select FB_CFB_COPYAREA

            
             	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  Support for the onboard framebuffer (1024x768x8) in the Personal

            
            	  DECstation series (Personal DECstation 5000/20, /25, /33, /50,

            
            	  Codename "Maxine").


            config FB_TX3912

            
            	bool "TMPTX3912/PR31700 frame buffer support"

            
            	depends on (FB = y) && NINO

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core

            
            	  see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.


            	  Say Y here to enable kernel support for the on-board framebuffer.


            config FB_G364

            
            	bool "G364 frame buffer support"

            
            	depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)

            
             	select FB_CFB_FILLRECT

            
             	select FB_CFB_COPYAREA

            
             	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  The G364 driver is the framebuffer used in MIPS Magnum 4000 and

            
            	  Olivetti M700-10 systems.


            config FB_68328

            
            	bool "Motorola 68328 native frame buffer support"

            
            	depends on FB && (M68328 || M68EZ328 || M68VZ328)

            
             	select FB_CFB_FILLRECT

            
             	select FB_CFB_COPYAREA

            
             	select FB_CFB_IMAGEBLIT

            
            	help

            
            	  Say Y here if you want to support the built-in frame buffer of

            
            	  the Motorola 68328 CPU family.


            config FB_PXA

            
            	tristate "PXA LCD framebuffer support"

            
            	depends on FB && ARCH_PXA

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	---help---

            
            	  Frame buffer driver for the built-in LCD controller in the Intel

            
            	  PXA2x0 processor.


            	  This driver is also available as a module ( = code which can be

            
            	  inserted and removed from the running kernel whenever you want). The

            
            	  module will be called pxafb. If you want to compile it as a module,

            
            	  say M here and read <file:Documentation/modules.txt>.


            	  If unsure, say N.


            config FB_PXA_PARAMETERS

            
            	bool "PXA LCD command line parameters"

            
            	default n

            
            	depends on FB_PXA

            
            	---help---

            
            	  Enable the use of kernel command line or module parameters

            
            	  to configure the physical properties of the LCD panel when

            
            	  using the PXA LCD driver.


            	  This option allows you to override the panel parameters

            
            	  supplied by the platform in order to support multiple

            
            	  different models of flatpanel. If you will only be using a

            
            	  single model of flatpanel then you can safely leave this

            
            	  option disabled.


            	  <file:Documentation/fb/pxafb.txt> describes the available parameters.


            config FB_W100

            
            	tristate "W100 frame buffer support"

            
            	depends on FB && PXA_SHARPSL

            
             	select FB_CFB_FILLRECT

            
             	select FB_CFB_COPYAREA

            
             	select FB_CFB_IMAGEBLIT

            
            	---help---

            
            	  Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.


            	  This driver is also available as a module ( = code which can be

            
            	  inserted and removed from the running kernel whenever you want). The

            
            	  module will be called w100fb. If you want to compile it as a module,

            
            	  say M here and read <file:Documentation/modules.txt>.


            	  If unsure, say N.


            config FB_S3C2410

            
            	tristate "S3C2410 LCD framebuffer support"

            
            	depends on FB && ARCH_S3C2410

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	---help---

            
            	  Frame buffer driver for the built-in LCD controller in the Samsung

            
            	  S3C2410 processor.


            	  This driver is also available as a module ( = code which can be

            
            	  inserted and removed from the running kernel whenever you want). The

            
            	  module will be called s3c2410fb. If you want to compile it as a module,

            
            	  say M here and read <file:Documentation/modules.txt>.


            	  If unsure, say N.

            
            config FB_S3C2410_DEBUG

            
            	bool "S3C2410 lcd debug messages"

            
            	depends on FB_S3C2410

            
            	help

            
            	  Turn on debugging messages. Note that you can set/unset at run time

            
            	  through sysfs


            config FB_VIRTUAL

            
            	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"

            
            	depends on FB

            
            	select FB_CFB_FILLRECT

            
            	select FB_CFB_COPYAREA

            
            	select FB_CFB_IMAGEBLIT

            
            	---help---

            
            	  This is a `virtual' frame buffer device. It operates on a chunk of

            
            	  unswappable kernel memory instead of on the memory of a graphics

            
            	  board. This means you cannot see any output sent to this frame

            
            	  buffer device, while it does consume precious memory. The main use

            
            	  of this frame buffer device is testing and debugging the frame

            
            	  buffer subsystem. Do NOT enable it for normal systems! To protect

            
            	  the innocent, it has to be enabled explicitly at boot time using the

            
            	  kernel option `video=vfb:'.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called vfb.


            	  If unsure, say N.

            
            if VT

            
            	source "drivers/video/console/Kconfig"

            
            endif


            if FB || SGI_NEWPORT_CONSOLE

            
            	source "drivers/video/logo/Kconfig"

            
            endif


            if FB && SYSFS

            
            	source "drivers/video/backlight/Kconfig"

            
            endif


            endmenu