| # | |
| # Serial device configuration | |
| # | |
| # $Id: Kconfig,v 1.11 2004/03/11 18:08:04 lethal Exp $ | |
| # | |
| menu "Serial drivers" | |
| # | |
| # The new 8250/16550 serial drivers | |
| config SERIAL_8250 | |
| tristate "8250/16550 and compatible serial support" | |
| depends on (BROKEN || !SPARC) | |
| select SERIAL_CORE | |
| ---help--- | |
| This selects whether you want to include the driver for the standard | |
| serial ports. The standard answer is Y. People who might say N | |
| here are those that are setting up dedicated Ethernet WWW/FTP | |
| servers, or users that have one of the various bus mice instead of a | |
| serial mouse and don't intend to use their machine's standard serial | |
| port for anything. (Note that the Cyclades and Stallion multi | |
| serial port drivers do not need this driver built in for them to | |
| work.) | |
| To compile this driver as a module, choose M here: the | |
| module will be called 8250. | |
| [WARNING: Do not compile this driver as a module if you are using | |
| non-standard serial ports, since the configuration information will | |
| be lost when the driver is unloaded. This limitation may be lifted | |
| in the future.] | |
| BTW1: If you have a mouseman serial mouse which is not recognized by | |
| the X window system, try running gpm first. | |
| BTW2: If you intend to use a software modem (also called Winmodem) | |
| under Linux, forget it. These modems are crippled and require | |
| proprietary drivers which are only available under Windows. | |
| Most people will say Y or M here, so that they can use serial mice, | |
| modems and similar devices connecting to the standard serial ports. | |
| config SERIAL_8250_CONSOLE | |
| bool "Console on 8250/16550 and compatible serial port" | |
| depends on SERIAL_8250=y | |
| select SERIAL_CORE_CONSOLE | |
| ---help--- | |
| If you say Y here, it will be possible to use a serial port as the | |
| system console (the system console is the device which receives all | |
| kernel messages and warnings and which allows logins in single user | |
| mode). This could be useful if some terminal or printer is connected | |
| to that serial port. | |
| Even if you say Y here, the currently visible virtual console | |
| (/dev/tty0) will still be used as the system console by default, but | |
| you can alter that using a kernel command line option such as | |
| "console=ttyS1". (Try "man bootparam" or see the documentation of | |
| your boot loader (grub or lilo or loadlin) about how to pass options | |
| to the kernel at boot time.) | |
| If you don't have a VGA card installed and you say Y here, the | |
| kernel will automatically use the first serial line, /dev/ttyS0, as | |
| system console. | |
| If unsure, say N. | |
| config SERIAL_8250_GSC | |
| tristate | |
| depends on SERIAL_8250 && GSC | |
| default SERIAL_8250 | |
| config SERIAL_8250_PCI | |
| tristate "8250/16550 PCI device support" if EMBEDDED | |
| depends on SERIAL_8250 && PCI | |
| default SERIAL_8250 | |
| help | |
| This builds standard PCI serial support. You may be able to | |
| disable this feature if you only need legacy serial support. | |
| Saves about 9K. | |
| config SERIAL_8250_PNP | |
| tristate "8250/16550 PNP device support" if EMBEDDED | |
| depends on SERIAL_8250 && PNP | |
| default SERIAL_8250 | |
| help | |
| This builds standard PNP serial support. You may be able to | |
| disable this feature if you only need legacy serial support. | |
| config SERIAL_8250_HP300 | |
| tristate | |
| depends on SERIAL_8250 && HP300 | |
| default SERIAL_8250 | |
| config SERIAL_8250_CS | |
| tristate "8250/16550 PCMCIA device support" | |
| depends on PCMCIA && SERIAL_8250 | |
| ---help--- | |
| Say Y here to enable support for 16-bit PCMCIA serial devices, | |
| including serial port cards, modems, and the modem functions of | |
| multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are | |
| credit-card size devices often used with laptops.) | |
| To compile this driver as a module, choose M here: the | |
| module will be called serial_cs. | |
| If unsure, say N. | |
| config SERIAL_8250_NR_UARTS | |
| int "Maximum number of 8250/16550 serial ports" | |
| depends on SERIAL_8250 | |
| default "4" | |
| help | |
| Set this to the number of serial ports you want the driver | |
| to support. This includes any ports discovered via ACPI or | |
| PCI enumeration and any ports that may be added at run-time | |
| via hot-plug, or any ISA multi-port serial cards. | |
| config SERIAL_8250_RUNTIME_UARTS | |
| int "Number of 8250/16550 serial ports to register at runtime" | |
| depends on SERIAL_8250 | |
| range 0 SERIAL_8250_NR_UARTS | |
| default "4" | |
| help | |
| Set this to the maximum number of serial ports you want | |
| the kernel to register at boot time. This can be overriden | |
| with the module parameter "nr_uarts", or boot-time parameter | |
| 8250.nr_uarts | |
| config SERIAL_8250_EXTENDED | |
| bool "Extended 8250/16550 serial driver options" | |
| depends on SERIAL_8250 | |
| help | |
| If you wish to use any non-standard features of the standard "dumb" | |
| driver, say Y here. This includes HUB6 support, shared serial | |
| interrupts, special multiport support, support for more than the | |
| four COM 1/2/3/4 boards, etc. | |
| Note that the answer to this question won't directly affect the | |
| kernel: saying N will just cause the configurator to skip all | |
| the questions about serial driver options. If unsure, say N. | |
| config SERIAL_8250_MANY_PORTS | |
| bool "Support more than 4 legacy serial ports" | |
| depends on SERIAL_8250_EXTENDED && !IA64 | |
| help | |
| Say Y here if you have dumb serial boards other than the four | |
| standard COM 1/2/3/4 ports. This may happen if you have an AST | |
| FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available | |
| from <http://www.tldp.org/docs.html#howto>), or other custom | |
| serial port hardware which acts similar to standard serial port | |
| hardware. If you only use the standard COM 1/2/3/4 ports, you can | |
| say N here to save some memory. You can also say Y if you have an | |
| "intelligent" multiport card such as Cyclades, Digiboards, etc. | |
| config SERIAL_8250_SHARE_IRQ | |
| bool "Support for sharing serial interrupts" | |
| depends on SERIAL_8250_EXTENDED | |
| help | |
| Some serial boards have hardware support which allows multiple dumb | |
| serial ports on the same board to share a single IRQ. To enable | |
| support for this in the serial driver, say Y here. | |
| config SERIAL_8250_DETECT_IRQ | |
| bool "Autodetect IRQ on standard ports (unsafe)" | |
| depends on SERIAL_8250_EXTENDED | |
| help | |
| Say Y here if you want the kernel to try to guess which IRQ | |
| to use for your serial port. | |
| This is considered unsafe; it is far better to configure the IRQ in | |
| a boot script using the setserial command. | |
| If unsure, say N. | |
| config SERIAL_8250_RSA | |
| bool "Support RSA serial ports" | |
| depends on SERIAL_8250_EXTENDED | |
| help | |
| ::: To be written ::: | |
| # | |
| # Multi-port serial cards | |
| # | |
| config SERIAL_8250_FOURPORT | |
| tristate "Support Fourport cards" | |
| depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
| help | |
| Say Y here if you have an AST FourPort serial board. | |
| To compile this driver as a module, choose M here: the module | |
| will be called 8250_fourport. | |
| config SERIAL_8250_ACCENT | |
| tristate "Support Accent cards" | |
| depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
| help | |
| Say Y here if you have an Accent Async serial board. | |
| To compile this driver as a module, choose M here: the module | |
| will be called 8250_accent. | |
| config SERIAL_8250_BOCA | |
| tristate "Support Boca cards" | |
| depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
| help | |
| Say Y here if you have a Boca serial board. Please read the Boca | |
| mini-HOWTO, avaialble from <http://www.tldp.org/docs.html#howto> | |
| To compile this driver as a module, choose M here: the module | |
| will be called 8250_boca. | |
| config SERIAL_8250_HUB6 | |
| tristate "Support Hub6 cards" | |
| depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
| help | |
| Say Y here if you have a HUB6 serial board. | |
| To compile this driver as a module, choose M here: the module | |
| will be called 8250_hub6. | |
| config SERIAL_8250_MCA | |
| tristate "Support 8250-type ports on MCA buses" | |
| depends on SERIAL_8250 != n && MCA | |
| help | |
| Say Y here if you have a MCA serial ports. | |
| To compile this driver as a module, choose M here: the module | |
| will be called 8250_mca. | |
| config SERIAL_8250_ACORN | |
| tristate "Acorn expansion card serial port support" | |
| depends on ARCH_ACORN && SERIAL_8250 | |
| help | |
| If you have an Atomwide Serial card or Serial Port card for an Acorn | |
| system, say Y to this option. The driver can handle 1, 2, or 3 port | |
| cards. If unsure, say N. | |
| config SERIAL_8250_AU1X00 | |
| bool "AU1X00 serial port support" | |
| depends on SERIAL_8250 != n && SOC_AU1X00 | |
| help | |
| If you have an Au1x00 board and want to use the serial port, say Y | |
| to this option. The driver can handle 1 or 2 serial ports. | |
| If unsure, say N. | |
| comment "Non-8250 serial port support" | |
| config SERIAL_AMBA_PL010 | |
| tristate "ARM AMBA PL010 serial port support" | |
| depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) | |
| select SERIAL_CORE | |
| help | |
| This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have | |
| an Integrator/AP or Integrator/PP2 platform, say Y or M here. | |
| If unsure, say N. | |
| config SERIAL_AMBA_PL010_CONSOLE | |
| bool "Support for console on AMBA serial port" | |
| depends on SERIAL_AMBA_PL010=y | |
| select SERIAL_CORE_CONSOLE | |
| ---help--- | |
| Say Y here if you wish to use an AMBA PrimeCell UART as the system | |
| console (the system console is the device which receives all kernel | |
| messages and warnings and which allows logins in single user mode). | |
| Even if you say Y here, the currently visible framebuffer console | |
| (/dev/tty0) will still be used as the system console by default, but | |
| you can alter that using a kernel command line option such as | |
| "console=ttyAM0". (Try "man bootparam" or see the documentation of | |
| your boot loader (lilo or loadlin) about how to pass options to the | |
| kernel at boot time.) | |
| config SERIAL_AMBA_PL011 | |
| tristate "ARM AMBA PL011 serial port support" | |
| depends on ARM_AMBA | |
| select SERIAL_CORE | |
| help | |
| This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have | |
| an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M | |
| here. | |
| If unsure, say N. | |
| config SERIAL_AMBA_PL011_CONSOLE | |
| bool "Support for console on AMBA serial port" | |
| depends on SERIAL_AMBA_PL011=y | |
| select SERIAL_CORE_CONSOLE | |
| ---help--- | |
| Say Y here if you wish to use an AMBA PrimeCell UART as the system | |
| console (the system console is the device which receives all kernel | |
| messages and warnings and which allows logins in single user mode). | |
| Even if you say Y here, the currently visible framebuffer console | |
| (/dev/tty0) will still be used as the system console by default, but | |
| you can alter that using a kernel command line option such as | |
| "console=ttyAM0". (Try "man bootparam" or see the documentation of | |
| your boot loader (lilo or loadlin) about how to pass options to the | |
| kernel at boot time.) | |
| config SERIAL_AT91 | |
| bool "AT91RM9200 / AT91SAM9261 serial port support" | |
| depends on ARM && (ARCH_AT91RM9200 || ARCH_AT91SAM9261) | |
| select SERIAL_CORE | |
| help | |
| This enables the driver for the on-chip UARTs of the Atmel | |
| AT91RM9200 and AT91SAM926 processor. | |
| config SERIAL_AT91_CONSOLE | |
| bool "Support for console on AT91RM9200 / AT91SAM9261 serial port" | |
| depends on SERIAL_AT91=y | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| Say Y here if you wish to use a UART on the Atmel AT91RM9200 or | |
| AT91SAM9261 as the system console (the system console is the device | |
| which receives all kernel messages and warnings and which allows | |
| logins in single user mode). | |
| config SERIAL_AT91_TTYAT | |
| bool "Install as device ttyAT0-4 instead of ttyS0-4" | |
| depends on SERIAL_AT91=y | |
| help | |
| Say Y here if you wish to have the five internal AT91RM9200 UARTs | |
| appear as /dev/ttyAT0-4 (major 204, minor 154-158) instead of the | |
| normal /dev/ttyS0-4 (major 4, minor 64-68). This is necessary if | |
| you also want other UARTs, such as external 8250/16C550 compatible | |
| UARTs. | |
| The ttySn nodes are legally reserved for the 8250 serial driver | |
| but are often misused by other serial drivers. | |
| To use this, you should create suitable ttyATn device nodes in | |
| /dev/, and pass "console=ttyATn" to the kernel. | |
| Say Y if you have an external 8250/16C550 UART. If unsure, say N. | |
| config SERIAL_CLPS711X | |
| tristate "CLPS711X serial port support" | |
| depends on ARM && ARCH_CLPS711X | |
| select SERIAL_CORE | |
| help | |
| ::: To be written ::: | |
| config SERIAL_CLPS711X_CONSOLE | |
| bool "Support for console on CLPS711X serial port" | |
| depends on SERIAL_CLPS711X=y | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| Even if you say Y here, the currently visible virtual console | |
| (/dev/tty0) will still be used as the system console by default, but | |
| you can alter that using a kernel command line option such as | |
| "console=ttyCL1". (Try "man bootparam" or see the documentation of | |
| your boot loader (lilo or loadlin) about how to pass options to the | |
| kernel at boot time.) | |
| config SERIAL_S3C2410 | |
| tristate "Samsung S3C2410 Serial port support" | |
| depends on ARM && ARCH_S3C2410 | |
| select SERIAL_CORE | |
| help | |
| Support for the on-chip UARTs on the Samsung S3C2410X CPU, | |
| providing /dev/ttySAC0, 1 and 2 (note, some machines may not | |
| provide all of these ports, depending on how the serial port | |
| pins are configured. | |
| config SERIAL_S3C2410_CONSOLE | |
| bool "Support for console on S3C2410 serial port" | |
| depends on SERIAL_S3C2410=y | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| Allow selection of the S3C2410 on-board serial ports for use as | |
| an virtual console. | |
| Even if you say Y here, the currently visible virtual console | |
| (/dev/tty0) will still be used as the system console by default, but | |
| you can alter that using a kernel command line option such as | |
| "console=ttySACx". (Try "man bootparam" or see the documentation of | |
| your boot loader about how to pass options to the kernel at | |
| boot time.) | |
| config SERIAL_DZ | |
| bool "DECstation DZ serial driver" | |
| depends on MACH_DECSTATION && 32BIT | |
| select SERIAL_CORE | |
| help | |
| DZ11-family serial controllers for VAXstations, including the | |
| DC7085, M7814, and M7819. | |
| config SERIAL_DZ_CONSOLE | |
| bool "Support console on DECstation DZ serial driver" | |
| depends on SERIAL_DZ=y | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| If you say Y here, it will be possible to use a serial port as the | |
| system console (the system console is the device which receives all | |
| kernel messages and warnings and which allows logins in single user | |
| mode). Note that the firmware uses ttyS0 as the serial console on | |
| the Maxine and ttyS2 on the others. | |
| If unsure, say Y. | |
| config SERIAL_21285 | |
| tristate "DC21285 serial port support" | |
| depends on ARM && FOOTBRIDGE | |
| select SERIAL_CORE | |
| help | |
| If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ | |
| PCI bridge you can enable its onboard serial port by enabling this | |
| option. | |
| config SERIAL_21285_CONSOLE | |
| bool "Console on DC21285 serial port" | |
| depends on SERIAL_21285=y | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| If you have enabled the serial port on the 21285 footbridge you can | |
| make it the console by answering Y to this option. | |
| Even if you say Y here, the currently visible virtual console | |
| (/dev/tty0) will still be used as the system console by default, but | |
| you can alter that using a kernel command line option such as | |
| "console=ttyFB". (Try "man bootparam" or see the documentation of | |
| your boot loader (lilo or loadlin) about how to pass options to the | |
| kernel at boot time.) | |
| config SERIAL_MPSC | |
| bool "Marvell MPSC serial port support" | |
| depends on PPC32 && MV64X60 | |
| select SERIAL_CORE | |
| help | |
| Say Y here if you want to use the Marvell MPSC serial controller. | |
| config SERIAL_MPSC_CONSOLE | |
| bool "Support for console on Marvell MPSC serial port" | |
| depends on SERIAL_MPSC | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| Say Y here if you want to support a serial console on a Marvell MPSC. | |
| config SERIAL_PXA | |
| bool "PXA serial port support" | |
| depends on ARM && ARCH_PXA | |
| select SERIAL_CORE | |
| help | |
| If you have a machine based on an Intel XScale PXA2xx CPU you | |
| can enable its onboard serial ports by enabling this option. | |
| config SERIAL_PXA_CONSOLE | |
| bool "Console on PXA serial port" | |
| depends on SERIAL_PXA | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| If you have enabled the serial port on the Intel XScale PXA | |
| CPU you can make it the console by answering Y to this option. | |
| Even if you say Y here, the currently visible virtual console | |
| (/dev/tty0) will still be used as the system console by default, but | |
| you can alter that using a kernel command line option such as | |
| "console=ttySA0". (Try "man bootparam" or see the documentation of | |
| your boot loader (lilo or loadlin) about how to pass options to the | |
| kernel at boot time.) | |
| config SERIAL_SA1100 | |
| bool "SA1100 serial port support" | |
| depends on ARM && ARCH_SA1100 | |
| select SERIAL_CORE | |
| help | |
| If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you | |
| can enable its onboard serial port by enabling this option. | |
| Please read <file:Documentation/arm/SA1100/serial_UART> for further | |
| info. | |
| config SERIAL_SA1100_CONSOLE | |
| bool "Console on SA1100 serial port" | |
| depends on SERIAL_SA1100 | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| If you have enabled the serial port on the SA1100/SA1110 StrongARM | |
| CPU you can make it the console by answering Y to this option. | |
| Even if you say Y here, the currently visible virtual console | |
| (/dev/tty0) will still be used as the system console by default, but | |
| you can alter that using a kernel command line option such as | |
| "console=ttySA0". (Try "man bootparam" or see the documentation of | |
| your boot loader (lilo or loadlin) about how to pass options to the | |
| kernel at boot time.) | |
| config SERIAL_IMX | |
| bool "IMX serial port support" | |
| depends on ARM && ARCH_IMX | |
| select SERIAL_CORE | |
| help | |
| If you have a machine based on a Motorola IMX CPU you | |
| can enable its onboard serial port by enabling this option. | |
| config SERIAL_IMX_CONSOLE | |
| bool "Console on IMX serial port" | |
| depends on SERIAL_IMX | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| If you have enabled the serial port on the Motorola IMX | |
| CPU you can make it the console by answering Y to this option. | |
| Even if you say Y here, the currently visible virtual console | |
| (/dev/tty0) will still be used as the system console by default, but | |
| you can alter that using a kernel command line option such as | |
| "console=ttySA0". (Try "man bootparam" or see the documentation of | |
| your boot loader (lilo or loadlin) about how to pass options to the | |
| kernel at boot time.) | |
| config SERIAL_SUNCORE | |
| bool | |
| depends on SPARC | |
| select SERIAL_CORE | |
| select SERIAL_CORE_CONSOLE | |
| default y | |
| config SERIAL_SUNZILOG | |
| tristate "Sun Zilog8530 serial support" | |
| depends on SPARC | |
| help | |
| This driver supports the Zilog8530 serial ports found on many Sparc | |
| systems. Say Y or M if you want to be able to these serial ports. | |
| config SERIAL_SUNZILOG_CONSOLE | |
| bool "Console on Sun Zilog8530 serial port" | |
| depends on SERIAL_SUNZILOG=y | |
| help | |
| If you would like to be able to use the Zilog8530 serial port | |
| on your Sparc system as the console, you can do so by answering | |
| Y to this option. | |
| config SERIAL_SUNSU | |
| tristate "Sun SU serial support" | |
| depends on SPARC && PCI | |
| help | |
| This driver supports the 8250 serial ports that run the keyboard and | |
| mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able | |
| to these serial ports. | |
| config SERIAL_SUNSU_CONSOLE | |
| bool "Console on Sun SU serial port" | |
| depends on SERIAL_SUNSU=y | |
| help | |
| If you would like to be able to use the SU serial port | |
| on your Sparc system as the console, you can do so by answering | |
| Y to this option. | |
| config SERIAL_MUX | |
| tristate "Serial MUX support" | |
| depends on GSC | |
| select SERIAL_CORE | |
| default y | |
| ---help--- | |
| Saying Y here will enable the hardware MUX serial driver for | |
| the Nova and K class systems. The hardware MUX is not 8250/16550 | |
| compatible therefore the /dev/ttyB0 device is shared between the | |
| Serial MUX and the PDC software console. The following steps | |
| need to be completed to use the Serial MUX: | |
| 1. create the device entry (mknod /dev/ttyB0 c 11 0) | |
| 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 | |
| 3. Add device ttyB0 to /etc/securetty (if you want to log on as | |
| root on this console.) | |
| 4. Change the kernel command console parameter to: console=ttyB0 | |
| config SERIAL_MUX_CONSOLE | |
| bool "Support for console on serial MUX" | |
| depends on SERIAL_MUX | |
| select SERIAL_CORE_CONSOLE | |
| default y | |
| config PDC_CONSOLE | |
| bool "PDC software console support" | |
| depends on PARISC && !SERIAL_MUX && VT | |
| default n | |
| help | |
| Saying Y here will enable the software based PDC console to be | |
| used as the system console. This is useful for machines in | |
| which the hardware based console has not been written yet. The | |
| following steps must be competed to use the PDC console: | |
| 1. create the device entry (mknod /dev/ttyB0 c 11 0) | |
| 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 | |
| 3. Add device ttyB0 to /etc/securetty (if you want to log on as | |
| root on this console.) | |
| 4. Change the kernel command console parameter to: console=ttyB0 | |
| config SERIAL_SUNSAB | |
| tristate "Sun Siemens SAB82532 serial support" | |
| depends on SPARC && PCI | |
| help | |
| This driver supports the Siemens SAB82532 DUSCC serial ports on newer | |
| (PCI) UltraSPARC systems. Say Y or M if you want to be able to these | |
| serial ports. | |
| config SERIAL_SUNSAB_CONSOLE | |
| bool "Console on Sun Siemens SAB82532 serial port" | |
| depends on SERIAL_SUNSAB=y | |
| help | |
| If you would like to be able to use the SAB82532 serial port | |
| on your Sparc system as the console, you can do so by answering | |
| Y to this option. | |
| config SERIAL_SUNHV | |
| bool "Sun4v Hypervisor Console support" | |
| depends on SPARC64 | |
| help | |
| This driver supports the console device found on SUN4V Sparc | |
| systems. Say Y if you want to be able to use this device. | |
| config SERIAL_IP22_ZILOG | |
| tristate "IP22 Zilog8530 serial support" | |
| depends on SGI_IP22 | |
| select SERIAL_CORE | |
| help | |
| This driver supports the Zilog8530 serial ports found on SGI IP22 | |
| systems. Say Y or M if you want to be able to these serial ports. | |
| config SERIAL_IP22_ZILOG_CONSOLE | |
| bool "Console on IP22 Zilog8530 serial port" | |
| depends on SERIAL_IP22_ZILOG=y | |
| select SERIAL_CORE_CONSOLE | |
| config V850E_UART | |
| bool "NEC V850E on-chip UART support" | |
| depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1 | |
| select SERIAL_CORE | |
| default y | |
| config V850E_UARTB | |
| bool | |
| depends V850E_UART && V850E_ME2 | |
| default y | |
| config V850E_UART_CONSOLE | |
| bool "Use NEC V850E on-chip UART for console" | |
| depends on V850E_UART | |
| select SERIAL_CORE_CONSOLE | |
| config SERIAL_SH_SCI | |
| tristate "SH SCI(F) serial port support" | |
| depends on SUPERH || H8300 | |
| select SERIAL_CORE | |
| config SERIAL_SH_SCI_CONSOLE | |
| bool "Support for console on SH SCI(F)" | |
| depends on SERIAL_SH_SCI=y | |
| select SERIAL_CORE_CONSOLE | |
| config SERIAL_CORE | |
| tristate | |
| config SERIAL_CORE_CONSOLE | |
| bool | |
| config SERIAL_68328 | |
| bool "68328 serial support" | |
| depends on M68328 || M68EZ328 || M68VZ328 | |
| help | |
| This driver supports the built-in serial port of the Motorola 68328 | |
| (standard, EZ and VZ varities). | |
| config SERIAL_68328_RTS_CTS | |
| bool "Support RTS/CTS on 68328 serial port" | |
| depends on SERIAL_68328 | |
| config SERIAL_COLDFIRE | |
| bool "ColdFire serial support" | |
| depends on COLDFIRE | |
| help | |
| This driver supports the built-in serial ports of the Motorola ColdFire | |
| family of CPUs. | |
| config SERIAL_68360_SMC | |
| bool "68360 SMC uart support" | |
| depends on M68360 | |
| help | |
| This driver supports the SMC serial ports of the Motorola 68360 CPU. | |
| config SERIAL_68360_SCC | |
| bool "68360 SCC uart support" | |
| depends on M68360 | |
| help | |
| This driver supports the SCC serial ports of the Motorola 68360 CPU. | |
| config SERIAL_68360 | |
| bool | |
| depends on SERIAL_68360_SMC || SERIAL_68360_SCC | |
| default y | |
| config SERIAL_PMACZILOG | |
| tristate "PowerMac z85c30 ESCC support" | |
| depends on PPC_OF && PPC_PMAC | |
| select SERIAL_CORE | |
| help | |
| This driver supports the Zilog z85C30 serial ports found on | |
| PowerMac machines. | |
| Say Y or M if you want to be able to these serial ports. | |
| config SERIAL_PMACZILOG_CONSOLE | |
| bool "Console on PowerMac z85c30 serial port" | |
| depends on SERIAL_PMACZILOG=y | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| If you would like to be able to use the z85c30 serial port | |
| on your PowerMac as the console, you can do so by answering | |
| Y to this option. | |
| config SERIAL_LH7A40X | |
| tristate "Sharp LH7A40X embedded UART support" | |
| depends on ARM && ARCH_LH7A40X | |
| select SERIAL_CORE | |
| help | |
| This enables support for the three on-board UARTs of the | |
| Sharp LH7A40X series CPUs. Choose Y or M. | |
| config SERIAL_LH7A40X_CONSOLE | |
| bool "Support for console on Sharp LH7A40X serial port" | |
| depends on SERIAL_LH7A40X=y | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| Say Y here if you wish to use one of the serial ports as the | |
| system console--the system console is the device which | |
| receives all kernel messages and warnings and which allows | |
| logins in single user mode. | |
| Even if you say Y here, the currently visible framebuffer console | |
| (/dev/tty0) will still be used as the default system console, but | |
| you can alter that using a kernel command line, for example | |
| "console=ttyAM1". | |
| config SERIAL_CPM | |
| tristate "CPM SCC/SMC serial port support" | |
| depends on CPM2 || 8xx | |
| select SERIAL_CORE | |
| help | |
| This driver supports the SCC and SMC serial ports on Motorola | |
| embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) | |
| config SERIAL_CPM_CONSOLE | |
| bool "Support for console on CPM SCC/SMC serial port" | |
| depends on SERIAL_CPM=y | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| Say Y here if you wish to use a SCC or SMC CPM UART as the system | |
| console (the system console is the device which receives all kernel | |
| messages and warnings and which allows logins in single user mode). | |
| Even if you say Y here, the currently visible framebuffer console | |
| (/dev/tty0) will still be used as the system console by default, but | |
| you can alter that using a kernel command line option such as | |
| "console=ttyCPM0". (Try "man bootparam" or see the documentation of | |
| your boot loader (lilo or loadlin) about how to pass options to the | |
| kernel at boot time.) | |
| config SERIAL_CPM_SCC1 | |
| bool "Support for SCC1 serial port" | |
| depends on SERIAL_CPM=y | |
| help | |
| Select the is option to use SCC1 as a serial port | |
| config SERIAL_CPM_SCC2 | |
| bool "Support for SCC2 serial port" | |
| depends on SERIAL_CPM=y | |
| help | |
| Select the is option to use SCC2 as a serial port | |
| config SERIAL_CPM_SCC3 | |
| bool "Support for SCC3 serial port" | |
| depends on SERIAL_CPM=y | |
| help | |
| Select the is option to use SCC3 as a serial port | |
| config SERIAL_CPM_SCC4 | |
| bool "Support for SCC4 serial port" | |
| depends on SERIAL_CPM=y | |
| help | |
| Select the is option to use SCC4 as a serial port | |
| config SERIAL_CPM_SMC1 | |
| bool "Support for SMC1 serial port" | |
| depends on SERIAL_CPM=y | |
| help | |
| Select the is option to use SMC1 as a serial port | |
| config SERIAL_CPM_SMC2 | |
| bool "Support for SMC2 serial port" | |
| depends on SERIAL_CPM=y | |
| help | |
| Select the is option to use SMC2 as a serial port | |
| config SERIAL_SGI_L1_CONSOLE | |
| bool "SGI Altix L1 serial console support" | |
| depends on IA64_GENERIC || IA64_SGI_SN2 | |
| select SERIAL_CORE | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| If you have an SGI Altix and you would like to use the system | |
| controller serial port as your console (you want this!), | |
| say Y. Otherwise, say N. | |
| config SERIAL_MPC52xx | |
| tristate "Freescale MPC52xx family PSC serial support" | |
| depends on PPC_MPC52xx | |
| select SERIAL_CORE | |
| help | |
| This drivers support the MPC52xx PSC serial ports. If you would | |
| like to use them, you must answer Y or M to this option. Not that | |
| for use as console, it must be included in kernel and not as a | |
| module. | |
| config SERIAL_MPC52xx_CONSOLE | |
| bool "Console on a Freescale MPC52xx family PSC serial port" | |
| depends on SERIAL_MPC52xx=y | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| Select this options if you'd like to use one of the PSC serial port | |
| of the Freescale MPC52xx family as a console. | |
| config SERIAL_MPC52xx_CONSOLE_BAUD | |
| int "Freescale MPC52xx family PSC serial port baud" | |
| depends on SERIAL_MPC52xx_CONSOLE=y | |
| default "9600" | |
| help | |
| Select the MPC52xx console baud rate. | |
| This value is only used if the bootloader doesn't pass in the | |
| console baudrate | |
| config SERIAL_ICOM | |
| tristate "IBM Multiport Serial Adapter" | |
| depends on PCI && (PPC_ISERIES || PPC_PSERIES) | |
| select SERIAL_CORE | |
| select FW_LOADER | |
| help | |
| This driver is for a family of multiport serial adapters | |
| including 2 port RVX, 2 port internal modem, 4 port internal | |
| modem and a split 1 port RVX and 1 port internal modem. | |
| This driver can also be built as a module. If so, the module | |
| will be called icom. | |
| config SERIAL_M32R_SIO | |
| bool "M32R SIO I/F" | |
| depends on M32R | |
| default y | |
| select SERIAL_CORE | |
| help | |
| Say Y here if you want to use the M32R serial controller. | |
| config SERIAL_M32R_SIO_CONSOLE | |
| bool "use SIO console" | |
| depends on SERIAL_M32R_SIO=y | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| Say Y here if you want to support a serial console. | |
| If you use an M3T-M32700UT or an OPSPUT platform, | |
| please say also y for SERIAL_M32R_PLDSIO. | |
| config SERIAL_M32R_PLDSIO | |
| bool "M32R SIO I/F on a PLD" | |
| depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT) | |
| default n | |
| help | |
| Say Y here if you want to use the M32R serial controller | |
| on a PLD (Programmable Logic Device). | |
| If you use an M3T-M32700UT or an OPSPUT platform, | |
| please say Y. | |
| config SERIAL_TXX9 | |
| bool "TMPTX39XX/49XX SIO support" | |
| depends HAS_TXX9_SERIAL | |
| select SERIAL_CORE | |
| default y | |
| config HAS_TXX9_SERIAL | |
| bool | |
| config SERIAL_TXX9_CONSOLE | |
| bool "TMPTX39XX/49XX SIO Console support" | |
| depends on SERIAL_TXX9=y | |
| select SERIAL_CORE_CONSOLE | |
| config SERIAL_TXX9_STDSERIAL | |
| bool "TX39XX/49XX SIO act as standard serial" | |
| depends on !SERIAL_8250 && SERIAL_TXX9 | |
| config SERIAL_VR41XX | |
| tristate "NEC VR4100 series Serial Interface Unit support" | |
| depends on CPU_VR41XX | |
| select SERIAL_CORE | |
| help | |
| If you have a NEC VR4100 series processor and you want to use | |
| Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU) | |
| (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N. | |
| config SERIAL_VR41XX_CONSOLE | |
| bool "Enable NEC VR4100 series Serial Interface Unit console" | |
| depends on SERIAL_VR41XX | |
| select SERIAL_CORE_CONSOLE | |
| help | |
| If you have a NEC VR4100 series processor and you want to use | |
| a console on a serial port, say Y. Otherwise, say N. | |
| config SERIAL_JSM | |
| tristate "Digi International NEO PCI Support" | |
| depends on PCI | |
| select SERIAL_CORE | |
| help | |
| This is a driver for Digi International's Neo series | |
| of cards which provide multiple serial ports. You would need | |
| something like this to connect more than two modems to your Linux | |
| box, for instance in order to become a dial-in server. This driver | |
| supports PCI boards only. | |
| If you have a card like this, say Y here, otherwise say N. | |
| To compile this driver as a module, choose M here: the | |
| module will be called jsm. | |
| config SERIAL_SGI_IOC4 | |
| tristate "SGI IOC4 controller serial support" | |
| depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4 | |
| select SERIAL_CORE | |
| help | |
| If you have an SGI Altix with an IOC4 based Base IO card | |
| and wish to use the serial ports on this card, say Y. | |
| Otherwise, say N. | |
| config SERIAL_SGI_IOC3 | |
| tristate "SGI Altix IOC3 serial support" | |
| depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3 | |
| select SERIAL_CORE | |
| help | |
| If you have an SGI Altix with an IOC3 serial card, | |
| say Y or M. Otherwise, say N. | |
| endmenu |