| /* | |
| * FILE NAME ite_gpio.c | |
| * | |
| * BRIEF MODULE DESCRIPTION | |
| * API for ITE GPIO device. | |
| * Driver for ITE GPIO device. | |
| * | |
| * Author: MontaVista Software, Inc. <source@mvista.com> | |
| * Hai-Pao Fan <haipao@mvista.com> | |
| * | |
| * Copyright 2001 MontaVista Software Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN | |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF | |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/kernel.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/addrspace.h> | |
| #include <asm/it8172/it8172_int.h> | |
| #include <linux/sched.h> | |
| #include <linux/ite_gpio.h> | |
| #define ite_gpio_base 0x14013800 | |
| #define ITE_GPADR (*(volatile __u8 *)(0x14013800 + KSEG1)) | |
| #define ITE_GPBDR (*(volatile __u8 *)(0x14013808 + KSEG1)) | |
| #define ITE_GPCDR (*(volatile __u8 *)(0x14013810 + KSEG1)) | |
| #define ITE_GPACR (*(volatile __u16 *)(0x14013802 + KSEG1)) | |
| #define ITE_GPBCR (*(volatile __u16 *)(0x1401380a + KSEG1)) | |
| #define ITE_GPCCR (*(volatile __u16 *)(0x14013812 + KSEG1)) | |
| #define ITE_GPAICR (*(volatile __u16 *)(0x14013804 + KSEG1)) | |
| #define ITE_GPBICR (*(volatile __u16 *)(0x1401380c + KSEG1)) | |
| #define ITE_GPCICR (*(volatile __u16 *)(0x14013814 + KSEG1)) | |
| #define ITE_GPAISR (*(volatile __u8 *)(0x14013806 + KSEG1)) | |
| #define ITE_GPBISR (*(volatile __u8 *)(0x1401380e + KSEG1)) | |
| #define ITE_GPCISR (*(volatile __u8 *)(0x14013816 + KSEG1)) | |
| #define ITE_GCR (*(volatile __u8 *)(0x14013818 + KSEG1)) | |
| #define MAX_GPIO_LINE 21 | |
| static int ite_gpio_irq=IT8172_GPIO_IRQ; | |
| static long ite_irq_counter[MAX_GPIO_LINE]; | |
| wait_queue_head_t ite_gpio_wait[MAX_GPIO_LINE]; | |
| static int ite_gpio_irq_pending[MAX_GPIO_LINE]; | |
| static int ite_gpio_debug=0; | |
| #define DEB(x) if (ite_gpio_debug>=1) x | |
| int ite_gpio_in(__u32 device, __u32 mask, volatile __u32 *data) | |
| { | |
| DEB(printk("ite_gpio_in mask=0x%x\n",mask)); | |
| switch (device) { | |
| case ITE_GPIO_PORTA: | |
| ITE_GPACR = (__u16)mask; /* 0xffff */ | |
| *data = ITE_GPADR; | |
| break; | |
| case ITE_GPIO_PORTB: | |
| ITE_GPBCR = (__u16)mask; /* 0xffff */ | |
| *data = ITE_GPBDR; | |
| break; | |
| case ITE_GPIO_PORTC: | |
| ITE_GPCCR = (__u16)mask; /* 0x03ff */ | |
| *data = ITE_GPCDR; | |
| break; | |
| default: | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| int ite_gpio_out(__u32 device, __u32 mask, __u32 data) | |
| { | |
| switch (device) { | |
| case ITE_GPIO_PORTA: | |
| ITE_GPACR = (__u16)mask; /* 0x5555 */ | |
| ITE_GPADR = (__u8)data; | |
| break; | |
| case ITE_GPIO_PORTB: | |
| ITE_GPBCR = (__u16)mask; /* 0x5555 */ | |
| ITE_GPBDR = (__u8)data; | |
| break; | |
| case ITE_GPIO_PORTC: | |
| ITE_GPCCR = (__u16)mask; /* 0x0155 */ | |
| ITE_GPCDR = (__u8)data; | |
| break; | |
| default: | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| int ite_gpio_int_ctrl(__u32 device, __u32 mask, __u32 data) | |
| { | |
| switch (device) { | |
| case ITE_GPIO_PORTA: | |
| ITE_GPAICR = (ITE_GPAICR & ~mask) | (data & mask); | |
| break; | |
| case ITE_GPIO_PORTB: | |
| ITE_GPBICR = (ITE_GPBICR & ~mask) | (data & mask); | |
| break; | |
| case ITE_GPIO_PORTC: | |
| ITE_GPCICR = (ITE_GPCICR & ~mask) | (data & mask); | |
| break; | |
| default: | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| int ite_gpio_in_status(__u32 device, __u32 mask, volatile __u32 *data) | |
| { | |
| int ret=-1; | |
| if ((MAX_GPIO_LINE > *data) && (*data >= 0)) | |
| ret=ite_gpio_irq_pending[*data]; | |
| DEB(printk("ite_gpio_in_status %d ret=%d\n",*data, ret)); | |
| switch (device) { | |
| case ITE_GPIO_PORTA: | |
| *data = ITE_GPAISR & mask; | |
| break; | |
| case ITE_GPIO_PORTB: | |
| *data = ITE_GPBISR & mask; | |
| break; | |
| case ITE_GPIO_PORTC: | |
| *data = ITE_GPCISR & mask; | |
| break; | |
| default: | |
| return -EFAULT; | |
| } | |
| return ret; | |
| } | |
| int ite_gpio_out_status(__u32 device, __u32 mask, __u32 data) | |
| { | |
| switch (device) { | |
| case ITE_GPIO_PORTA: | |
| ITE_GPAISR = (ITE_GPAISR & ~mask) | (data & mask); | |
| break; | |
| case ITE_GPIO_PORTB: | |
| ITE_GPBISR = (ITE_GPBISR & ~mask) | (data & mask); | |
| break; | |
| case ITE_GPIO_PORTC: | |
| ITE_GPCISR = (ITE_GPCISR & ~mask) | (data & mask); | |
| break; | |
| default: | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| int ite_gpio_gen_ctrl(__u32 device, __u32 mask, __u32 data) | |
| { | |
| ITE_GCR = (ITE_GCR & ~mask) | (data & mask); | |
| return 0; | |
| } | |
| int ite_gpio_int_wait (__u32 device, __u32 mask, __u32 data) | |
| { | |
| int i,line=0, ret=0; | |
| unsigned long flags; | |
| switch (device) { | |
| case ITE_GPIO_PORTA: | |
| line = data & mask; | |
| break; | |
| case ITE_GPIO_PORTB: | |
| line = (data & mask) <<8; | |
| break; | |
| case ITE_GPIO_PORTC: | |
| line = (data & mask) <<16; | |
| break; | |
| } | |
| for (i=MAX_GPIO_LINE-1; i >= 0; i--) { | |
| if ( (line) & (1 << i)) | |
| break; | |
| } | |
| DEB(printk("wait device=0x%d mask=0x%x data=0x%x index %d\n", | |
| device, mask, data, i)); | |
| if (line & ~(1<<i)) | |
| return -EFAULT; | |
| if (ite_gpio_irq_pending[i]==1) | |
| return -EFAULT; | |
| save_flags (flags); | |
| cli(); | |
| ite_gpio_irq_pending[i] = 1; | |
| ret = interruptible_sleep_on_timeout(&ite_gpio_wait[i], 3*HZ); | |
| restore_flags (flags); | |
| ite_gpio_irq_pending[i] = 0; | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(ite_gpio_in); | |
| EXPORT_SYMBOL(ite_gpio_out); | |
| EXPORT_SYMBOL(ite_gpio_int_ctrl); | |
| EXPORT_SYMBOL(ite_gpio_in_status); | |
| EXPORT_SYMBOL(ite_gpio_out_status); | |
| EXPORT_SYMBOL(ite_gpio_gen_ctrl); | |
| EXPORT_SYMBOL(ite_gpio_int_wait); | |
| static int ite_gpio_open(struct inode *inode, struct file *file) | |
| { | |
| return 0; | |
| } | |
| static int ite_gpio_release(struct inode *inode, struct file *file) | |
| { | |
| return 0; | |
| } | |
| static int ite_gpio_ioctl(struct inode *inode, struct file *file, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| static struct ite_gpio_ioctl_data ioctl_data; | |
| if (copy_from_user(&ioctl_data, (struct ite_gpio_ioctl_data *)arg, | |
| sizeof(ioctl_data))) | |
| return -EFAULT; | |
| if ((ioctl_data.device < ITE_GPIO_PORTA) || | |
| (ioctl_data.device > ITE_GPIO_PORTC) ) | |
| return -EFAULT; | |
| switch(cmd) { | |
| case ITE_GPIO_IN: | |
| if (ite_gpio_in(ioctl_data.device, ioctl_data.mask, | |
| &ioctl_data.data)) | |
| return -EFAULT; | |
| if (copy_to_user((struct ite_gpio_ioctl_data *)arg, | |
| &ioctl_data, sizeof(ioctl_data))) | |
| return -EFAULT; | |
| break; | |
| case ITE_GPIO_OUT: | |
| return ite_gpio_out(ioctl_data.device, | |
| ioctl_data.mask, ioctl_data.data); | |
| break; | |
| case ITE_GPIO_INT_CTRL: | |
| return ite_gpio_int_ctrl(ioctl_data.device, | |
| ioctl_data.mask, ioctl_data.data); | |
| break; | |
| case ITE_GPIO_IN_STATUS: | |
| if (ite_gpio_in_status(ioctl_data.device, ioctl_data.mask, | |
| &ioctl_data.data)) | |
| return -EFAULT; | |
| if (copy_to_user((struct ite_gpio_ioctl_data *)arg, | |
| &ioctl_data, sizeof(ioctl_data))) | |
| return -EFAULT; | |
| break; | |
| case ITE_GPIO_OUT_STATUS: | |
| return ite_gpio_out_status(ioctl_data.device, | |
| ioctl_data.mask, ioctl_data.data); | |
| break; | |
| case ITE_GPIO_GEN_CTRL: | |
| return ite_gpio_gen_ctrl(ioctl_data.device, | |
| ioctl_data.mask, ioctl_data.data); | |
| break; | |
| case ITE_GPIO_INT_WAIT: | |
| return ite_gpio_int_wait(ioctl_data.device, | |
| ioctl_data.mask, ioctl_data.data); | |
| break; | |
| default: | |
| return -ENOIOCTLCMD; | |
| } | |
| return 0; | |
| } | |
| static void ite_gpio_irq_handler(int this_irq, void *dev_id, | |
| struct pt_regs *regs) | |
| { | |
| int i,line; | |
| line = ITE_GPCISR & 0x1f; | |
| for (i=4; i >=0; i--) { | |
| if ( line & (1 << i)) { | |
| ++ite_irq_counter[i+16]; | |
| ite_gpio_irq_pending[i+16] = 2; | |
| wake_up_interruptible(&ite_gpio_wait[i+16]); | |
| DEB(printk("interrupt 0x%x %d\n", &ite_gpio_wait[i+16], i+16)); | |
| ITE_GPCISR = ITE_GPCISR & (1<<i); | |
| return; | |
| } | |
| } | |
| line = ITE_GPBISR; | |
| for (i=7; i >= 0; i--) { | |
| if ( line & (1 << i)) { | |
| ++ite_irq_counter[i+8]; | |
| ite_gpio_irq_pending[i+8] = 2; | |
| wake_up_interruptible(&ite_gpio_wait[i+8]); | |
| DEB(printk("interrupt 0x%x %d\n",ITE_GPBISR, i+8)); | |
| ITE_GPBISR = ITE_GPBISR & (1<<i); | |
| return; | |
| } | |
| } | |
| line = ITE_GPAISR; | |
| for (i=7; i >= 0; i--) { | |
| if ( line & (1 << i)) { | |
| ++ite_irq_counter[i]; | |
| ite_gpio_irq_pending[i] = 2; | |
| wake_up_interruptible(&ite_gpio_wait[i]); | |
| DEB(printk("interrupt 0x%x %d\n",ITE_GPAISR, i)); | |
| ITE_GPAISR = ITE_GPAISR & (1<<i); | |
| return; | |
| } | |
| } | |
| } | |
| static struct file_operations ite_gpio_fops = { | |
| .owner = THIS_MODULE, | |
| .ioctl = ite_gpio_ioctl, | |
| .open = ite_gpio_open, | |
| .release = ite_gpio_release, | |
| }; | |
| static struct miscdevice ite_gpio_miscdev = { | |
| MISC_DYNAMIC_MINOR, | |
| "ite_gpio", | |
| &ite_gpio_fops | |
| }; | |
| int __init ite_gpio_init(void) | |
| { | |
| int i; | |
| if (misc_register(&ite_gpio_miscdev)) | |
| return -ENODEV; | |
| if (!request_region(ite_gpio_base, 0x1c, "ITE GPIO")) | |
| { | |
| misc_deregister(&ite_gpio_miscdev); | |
| return -EIO; | |
| } | |
| /* initialize registers */ | |
| ITE_GPACR = 0xffff; | |
| ITE_GPBCR = 0xffff; | |
| ITE_GPCCR = 0xffff; | |
| ITE_GPAICR = 0x00ff; | |
| ITE_GPBICR = 0x00ff; | |
| ITE_GPCICR = 0x00ff; | |
| ITE_GCR = 0; | |
| for (i = 0; i < MAX_GPIO_LINE; i++) { | |
| ite_gpio_irq_pending[i]=0; | |
| init_waitqueue_head(&ite_gpio_wait[i]); | |
| } | |
| if (request_irq(ite_gpio_irq, ite_gpio_irq_handler, SA_SHIRQ, "gpio", 0) < 0) { | |
| misc_deregister(&ite_gpio_miscdev); | |
| release_region(ite_gpio_base, 0x1c); | |
| return 0; | |
| } | |
| printk("GPIO at 0x%x (irq = %d)\n", ite_gpio_base, ite_gpio_irq); | |
| return 0; | |
| } | |
| static void __exit ite_gpio_exit(void) | |
| { | |
| misc_deregister(&ite_gpio_miscdev); | |
| } | |
| module_init(ite_gpio_init); | |
| module_exit(ite_gpio_exit); | |
| MODULE_LICENSE("GPL"); |