| /*arch/ppc/platforms/mpc885ads-setup.c | |
| * | |
| * Platform setup for the Freescale mpc885ads board | |
| * | |
| * Vitaly Bordug <vbordug@ru.mvista.com> | |
| * | |
| * Copyright 2005 MontaVista Software Inc. | |
| * | |
| * This file is licensed under the terms of the GNU General Public License | |
| * version 2. This program is licensed "as is" without any warranty of any | |
| * kind, whether express or implied. | |
| */ | |
| #include <linux/config.h> | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/param.h> | |
| #include <linux/string.h> | |
| #include <linux/ioport.h> | |
| #include <linux/device.h> | |
| #include <linux/fs_enet_pd.h> | |
| #include <linux/fs_uart_pd.h> | |
| #include <linux/mii.h> | |
| #include <asm/delay.h> | |
| #include <asm/io.h> | |
| #include <asm/machdep.h> | |
| #include <asm/page.h> | |
| #include <asm/processor.h> | |
| #include <asm/system.h> | |
| #include <asm/time.h> | |
| #include <asm/ppcboot.h> | |
| #include <asm/8xx_immap.h> | |
| #include <asm/commproc.h> | |
| #include <asm/ppc_sys.h> | |
| extern unsigned char __res[]; | |
| static void setup_smc1_ioports(void); | |
| static void setup_smc2_ioports(void); | |
| static void __init mpc885ads_scc_phy_init(char); | |
| static struct fs_uart_platform_info mpc885_uart_pdata[] = { | |
| [fsid_smc1_uart] = { | |
| .brg = 1, | |
| .fs_no = fsid_smc1_uart, | |
| .init_ioports = setup_smc1_ioports, | |
| .tx_num_fifo = 4, | |
| .tx_buf_size = 32, | |
| .rx_num_fifo = 4, | |
| .rx_buf_size = 32, | |
| }, | |
| [fsid_smc2_uart] = { | |
| .brg = 2, | |
| .fs_no = fsid_smc2_uart, | |
| .init_ioports = setup_smc2_ioports, | |
| .tx_num_fifo = 4, | |
| .tx_buf_size = 32, | |
| .rx_num_fifo = 4, | |
| .rx_buf_size = 32, | |
| }, | |
| }; | |
| static struct fs_mii_bus_info fec_mii_bus_info = { | |
| .method = fsmii_fec, | |
| .id = 0, | |
| }; | |
| static struct fs_mii_bus_info scc_mii_bus_info = { | |
| #ifdef CONFIG_SCC_ENET_8xx_FIXED | |
| .method = fsmii_fixed, | |
| #else | |
| .method = fsmii_fec, | |
| #endif | |
| .id = 0, | |
| }; | |
| static struct fs_platform_info mpc8xx_fec_pdata[] = { | |
| { | |
| .rx_ring = 128, | |
| .tx_ring = 16, | |
| .rx_copybreak = 240, | |
| .use_napi = 1, | |
| .napi_weight = 17, | |
| .phy_addr = 0, | |
| .phy_irq = SIU_IRQ7, | |
| .bus_info = &fec_mii_bus_info, | |
| }, { | |
| .rx_ring = 128, | |
| .tx_ring = 16, | |
| .rx_copybreak = 240, | |
| .use_napi = 1, | |
| .napi_weight = 17, | |
| .phy_addr = 1, | |
| .phy_irq = SIU_IRQ7, | |
| .bus_info = &fec_mii_bus_info, | |
| } | |
| }; | |
| static struct fs_platform_info mpc8xx_scc_pdata = { | |
| .rx_ring = 64, | |
| .tx_ring = 8, | |
| .rx_copybreak = 240, | |
| .use_napi = 1, | |
| .napi_weight = 17, | |
| .phy_addr = 2, | |
| #ifdef CONFIG_MPC8xx_SCC_ENET_FIXED | |
| .phy_irq = -1, | |
| #else | |
| .phy_irq = SIU_IRQ7, | |
| #endif | |
| .bus_info = &scc_mii_bus_info, | |
| }; | |
| void __init board_init(void) | |
| { | |
| volatile cpm8xx_t *cp = cpmp; | |
| unsigned int *bcsr_io; | |
| #ifdef CONFIG_FS_ENET | |
| immap_t *immap = (immap_t *) IMAP_ADDR; | |
| #endif | |
| bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); | |
| if (bcsr_io == NULL) { | |
| printk(KERN_CRIT "Could not remap BCSR\n"); | |
| return; | |
| } | |
| #ifdef CONFIG_SERIAL_CPM_SMC1 | |
| cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */ | |
| clrbits32(bcsr_io, BCSR1_RS232EN_1); | |
| cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX); | |
| cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); | |
| #else | |
| setbits32(bcsr_io,BCSR1_RS232EN_1); | |
| cp->cp_smc[0].smc_smcmr = 0; | |
| cp->cp_smc[0].smc_smce = 0; | |
| #endif | |
| #ifdef CONFIG_SERIAL_CPM_SMC2 | |
| cp->cp_simode &= ~(0xe0000000 >> 1); | |
| cp->cp_simode |= (0x20000000 >> 1); /* brg2 */ | |
| clrbits32(bcsr_io,BCSR1_RS232EN_2); | |
| cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX); | |
| cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); | |
| #else | |
| setbits32(bcsr_io,BCSR1_RS232EN_2); | |
| cp->cp_smc[1].smc_smcmr = 0; | |
| cp->cp_smc[1].smc_smce = 0; | |
| #endif | |
| iounmap(bcsr_io); | |
| #ifdef CONFIG_FS_ENET | |
| /* use MDC for MII (common) */ | |
| setbits16(&immap->im_ioport.iop_pdpar, 0x0080); | |
| clrbits16(&immap->im_ioport.iop_pddir, 0x0080); | |
| #endif | |
| } | |
| static void setup_fec1_ioports(void) | |
| { | |
| immap_t *immap = (immap_t *) IMAP_ADDR; | |
| /* configure FEC1 pins */ | |
| setbits16(&immap->im_ioport.iop_papar, 0xf830); | |
| setbits16(&immap->im_ioport.iop_padir, 0x0830); | |
| clrbits16(&immap->im_ioport.iop_padir, 0xf000); | |
| setbits32(&immap->im_cpm.cp_pbpar, 0x00001001); | |
| clrbits32(&immap->im_cpm.cp_pbdir, 0x00001001); | |
| setbits16(&immap->im_ioport.iop_pcpar, 0x000c); | |
| clrbits16(&immap->im_ioport.iop_pcdir, 0x000c); | |
| setbits32(&immap->im_cpm.cp_pepar, 0x00000003); | |
| setbits32(&immap->im_cpm.cp_pedir, 0x00000003); | |
| clrbits32(&immap->im_cpm.cp_peso, 0x00000003); | |
| clrbits32(&immap->im_cpm.cp_cptr, 0x00000100); | |
| } | |
| static void setup_fec2_ioports(void) | |
| { | |
| immap_t *immap = (immap_t *) IMAP_ADDR; | |
| /* configure FEC2 pins */ | |
| setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc); | |
| setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc); | |
| setbits32(&immap->im_cpm.cp_peso, 0x00037800); | |
| clrbits32(&immap->im_cpm.cp_peso, 0x000087fc); | |
| clrbits32(&immap->im_cpm.cp_cptr, 0x00000080); | |
| } | |
| static void setup_scc3_ioports(void) | |
| { | |
| immap_t *immap = (immap_t *) IMAP_ADDR; | |
| unsigned *bcsr_io; | |
| bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE); | |
| if (bcsr_io == NULL) { | |
| printk(KERN_CRIT "Could not remap BCSR\n"); | |
| return; | |
| } | |
| /* Enable the PHY. | |
| */ | |
| setbits32(bcsr_io+4, BCSR4_ETH10_RST); | |
| /* Configure port A pins for Txd and Rxd. | |
| */ | |
| setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD); | |
| clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD); | |
| /* Configure port C pins to enable CLSN and RENA. | |
| */ | |
| clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA); | |
| clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA); | |
| setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA); | |
| /* Configure port E for TCLK and RCLK. | |
| */ | |
| setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK); | |
| clrbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA); | |
| clrbits32(&immap->im_cpm.cp_pedir, | |
| PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA); | |
| clrbits32(&immap->im_cpm.cp_peso, PE_ENET_TCLK | PE_ENET_RCLK); | |
| setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA); | |
| /* Configure Serial Interface clock routing. | |
| * First, clear all SCC bits to zero, then set the ones we want. | |
| */ | |
| clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK); | |
| setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT); | |
| /* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used. | |
| */ | |
| immap->im_cpm.cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); | |
| /* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode | |
| * by H/W setting after reset. SCC ethernet controller support only half duplex. | |
| * This discrepancy of modes causes a lot of carrier lost errors. | |
| */ | |
| /* In the original SCC enet driver the following code is placed at | |
| the end of the initialization */ | |
| setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA); | |
| clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA); | |
| setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA); | |
| setbits32(bcsr_io+1, BCSR1_ETHEN); | |
| iounmap(bcsr_io); | |
| } | |
| static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) | |
| { | |
| struct fs_platform_info *fpi = pdev->dev.platform_data; | |
| volatile cpm8xx_t *cp; | |
| bd_t *bd = (bd_t *) __res; | |
| char *e; | |
| int i; | |
| /* Get pointer to Communication Processor */ | |
| cp = cpmp; | |
| switch (fs_no) { | |
| case fsid_fec1: | |
| fpi = &mpc8xx_fec_pdata[0]; | |
| fpi->init_ioports = &setup_fec1_ioports; | |
| break; | |
| case fsid_fec2: | |
| fpi = &mpc8xx_fec_pdata[1]; | |
| fpi->init_ioports = &setup_fec2_ioports; | |
| break; | |
| case fsid_scc3: | |
| fpi = &mpc8xx_scc_pdata; | |
| fpi->init_ioports = &setup_scc3_ioports; | |
| mpc885ads_scc_phy_init(fpi->phy_addr); | |
| break; | |
| default: | |
| printk(KERN_WARNING"Device %s is not supported!\n", pdev->name); | |
| return; | |
| } | |
| pdev->dev.platform_data = fpi; | |
| fpi->fs_no = fs_no; | |
| e = (unsigned char *)&bd->bi_enetaddr; | |
| for (i = 0; i < 6; i++) | |
| fpi->macaddr[i] = *e++; | |
| fpi->macaddr[5 - pdev->id]++; | |
| } | |
| static void mpc885ads_fixup_fec_enet_pdata(struct platform_device *pdev, | |
| int idx) | |
| { | |
| /* This is for FEC devices only */ | |
| if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) | |
| return; | |
| mpc885ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); | |
| } | |
| static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev, | |
| int idx) | |
| { | |
| /* This is for SCC devices only */ | |
| if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) | |
| return; | |
| mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); | |
| } | |
| /* SCC ethernet controller does not have MII management channel. FEC1 MII | |
| * channel is used to communicate with the 10Mbit PHY. | |
| */ | |
| #define MII_ECNTRL_PINMUX 0x4 | |
| #define FEC_ECNTRL_PINMUX 0x00000004 | |
| #define FEC_RCNTRL_MII_MODE 0x00000004 | |
| /* Make MII read/write commands. | |
| */ | |
| #define mk_mii_write(REG, VAL, PHY_ADDR) (0x50020000 | (((REG) & 0x1f) << 18) | \ | |
| ((VAL) & 0xffff) | ((PHY_ADDR) << 23)) | |
| static void mpc885ads_scc_phy_init(char phy_addr) | |
| { | |
| volatile immap_t *immap; | |
| volatile fec_t *fecp; | |
| bd_t *bd; | |
| bd = (bd_t *) __res; | |
| immap = (immap_t *) IMAP_ADDR; /* pointer to internal registers */ | |
| fecp = &(immap->im_cpm.cp_fec); | |
| /* Enable MII pins of the FEC1 | |
| */ | |
| setbits16(&immap->im_ioport.iop_pdpar, 0x0080); | |
| clrbits16(&immap->im_ioport.iop_pddir, 0x0080); | |
| /* Set MII speed to 2.5 MHz | |
| */ | |
| out_be32(&fecp->fec_mii_speed, | |
| ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1); | |
| /* Enable FEC pin MUX | |
| */ | |
| setbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX); | |
| setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); | |
| out_be32(&fecp->fec_mii_data, | |
| mk_mii_write(MII_BMCR, BMCR_ISOLATE, phy_addr)); | |
| udelay(100); | |
| out_be32(&fecp->fec_mii_data, | |
| mk_mii_write(MII_ADVERTISE, | |
| ADVERTISE_10HALF | ADVERTISE_CSMA, phy_addr)); | |
| udelay(100); | |
| /* Disable FEC MII settings | |
| */ | |
| clrbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX); | |
| clrbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); | |
| out_be32(&fecp->fec_mii_speed, 0); | |
| } | |
| static void setup_smc1_ioports(void) | |
| { | |
| immap_t *immap = (immap_t *) IMAP_ADDR; | |
| unsigned *bcsr_io; | |
| unsigned int iobits = 0x000000c0; | |
| bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); | |
| if (bcsr_io == NULL) { | |
| printk(KERN_CRIT "Could not remap BCSR1\n"); | |
| return; | |
| } | |
| clrbits32(bcsr_io,BCSR1_RS232EN_1); | |
| iounmap(bcsr_io); | |
| setbits32(&immap->im_cpm.cp_pbpar, iobits); | |
| clrbits32(&immap->im_cpm.cp_pbdir, iobits); | |
| clrbits16(&immap->im_cpm.cp_pbodr, iobits); | |
| } | |
| static void setup_smc2_ioports(void) | |
| { | |
| immap_t *immap = (immap_t *) IMAP_ADDR; | |
| unsigned *bcsr_io; | |
| unsigned int iobits = 0x00000c00; | |
| bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); | |
| if (bcsr_io == NULL) { | |
| printk(KERN_CRIT "Could not remap BCSR1\n"); | |
| return; | |
| } | |
| clrbits32(bcsr_io,BCSR1_RS232EN_2); | |
| iounmap(bcsr_io); | |
| #ifndef CONFIG_SERIAL_CPM_ALT_SMC2 | |
| setbits32(&immap->im_cpm.cp_pbpar, iobits); | |
| clrbits32(&immap->im_cpm.cp_pbdir, iobits); | |
| clrbits16(&immap->im_cpm.cp_pbodr, iobits); | |
| #else | |
| setbits16(&immap->im_ioport.iop_papar, iobits); | |
| clrbits16(&immap->im_ioport.iop_padir, iobits); | |
| clrbits16(&immap->im_ioport.iop_paodr, iobits); | |
| #endif | |
| } | |
| static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev, | |
| int idx) | |
| { | |
| bd_t *bd = (bd_t *) __res; | |
| struct fs_uart_platform_info *pinfo; | |
| int num = ARRAY_SIZE(mpc885_uart_pdata); | |
| int id = fs_uart_id_smc2fsid(idx); | |
| /* no need to alter anything if console */ | |
| if ((id <= num) && (!pdev->dev.platform_data)) { | |
| pinfo = &mpc885_uart_pdata[id]; | |
| pinfo->uart_clk = bd->bi_intfreq; | |
| pdev->dev.platform_data = pinfo; | |
| } | |
| } | |
| static int mpc885ads_platform_notify(struct device *dev) | |
| { | |
| static const struct platform_notify_dev_map dev_map[] = { | |
| { | |
| .bus_id = "fsl-cpm-fec", | |
| .rtn = mpc885ads_fixup_fec_enet_pdata, | |
| }, | |
| { | |
| .bus_id = "fsl-cpm-scc", | |
| .rtn = mpc885ads_fixup_scc_enet_pdata, | |
| }, | |
| { | |
| .bus_id = "fsl-cpm-smc:uart", | |
| .rtn = mpc885ads_fixup_uart_pdata | |
| }, | |
| { | |
| .bus_id = NULL | |
| } | |
| }; | |
| platform_notify_map(dev_map,dev); | |
| return 0; | |
| } | |
| int __init mpc885ads_init(void) | |
| { | |
| printk(KERN_NOTICE "mpc885ads: Init\n"); | |
| platform_notify = mpc885ads_platform_notify; | |
| ppc_sys_device_initfunc(); | |
| ppc_sys_device_disable_all(); | |
| ppc_sys_device_enable(MPC8xx_CPM_FEC1); | |
| #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 | |
| ppc_sys_device_enable(MPC8xx_CPM_SCC1); | |
| #endif | |
| #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 | |
| ppc_sys_device_enable(MPC8xx_CPM_FEC2); | |
| #endif | |
| #ifdef CONFIG_SERIAL_CPM_SMC1 | |
| ppc_sys_device_enable(MPC8xx_CPM_SMC1); | |
| ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART); | |
| #endif | |
| #ifdef CONFIG_SERIAL_CPM_SMC2 | |
| ppc_sys_device_enable(MPC8xx_CPM_SMC2); | |
| ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); | |
| #endif | |
| return 0; | |
| } | |
| arch_initcall(mpc885ads_init); | |
| /* | |
| To prevent confusion, console selection is gross: | |
| by 0 assumed SMC1 and by 1 assumed SMC2 | |
| */ | |
| struct platform_device* early_uart_get_pdev(int index) | |
| { | |
| bd_t *bd = (bd_t *) __res; | |
| struct fs_uart_platform_info *pinfo; | |
| struct platform_device* pdev = NULL; | |
| if(index) { /*assume SMC2 here*/ | |
| pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2]; | |
| pinfo = &mpc885_uart_pdata[1]; | |
| } else { /*over SMC1*/ | |
| pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1]; | |
| pinfo = &mpc885_uart_pdata[0]; | |
| } | |
| pinfo->uart_clk = bd->bi_intfreq; | |
| pdev->dev.platform_data = pinfo; | |
| ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR); | |
| return NULL; | |
| } | |