| /*arch/ppc/platforms/mpc885ads-setup.c | |
| * | |
| * Platform setup for the Freescale mpc885ads board | |
| * | |
| * Vitaly Bordug <vbordug@ru.mvista.com> | |
| * | |
| * Copyright 2005 MontaVista Software Inc. | |
| * | |
| * This file is licensed under the terms of the GNU General Public License | |
| * version 2. This program is licensed "as is" without any warranty of any | |
| * kind, whether express or implied. | |
| */ | |
| #include <linux/config.h> | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/param.h> | |
| #include <linux/string.h> | |
| #include <linux/ioport.h> | |
| #include <linux/device.h> | |
| #include <linux/fs_enet_pd.h> | |
| #include <linux/fs_uart_pd.h> | |
| #include <linux/mii.h> | |
| #include <asm/delay.h> | |
| #include <asm/io.h> | |
| #include <asm/machdep.h> | |
| #include <asm/page.h> | |
| #include <asm/processor.h> | |
| #include <asm/system.h> | |
| #include <asm/time.h> | |
| #include <asm/ppcboot.h> | |
| #include <asm/8xx_immap.h> | |
| #include <asm/commproc.h> | |
| #include <asm/ppc_sys.h> | |
| #include <asm/mpc8xx.h> | |
| extern unsigned char __res[]; | |
| static void setup_fec1_ioports(void); | |
| static void setup_scc1_ioports(void); | |
| static void setup_smc1_ioports(void); | |
| static void setup_smc2_ioports(void); | |
| static struct fs_mii_bus_info fec_mii_bus_info = { | |
| .method = fsmii_fec, | |
| .id = 0, | |
| }; | |
| static struct fs_mii_bus_info scc_mii_bus_info = { | |
| .method = fsmii_fixed, | |
| .id = 0, | |
| .i.fixed.speed = 10, | |
| .i.fixed.duplex = 0, | |
| }; | |
| static struct fs_platform_info mpc8xx_fec_pdata[] = { | |
| { | |
| .rx_ring = 128, | |
| .tx_ring = 16, | |
| .rx_copybreak = 240, | |
| .use_napi = 1, | |
| .napi_weight = 17, | |
| .phy_addr = 15, | |
| .phy_irq = -1, | |
| .use_rmii = 0, | |
| .bus_info = &fec_mii_bus_info, | |
| } | |
| }; | |
| static struct fs_platform_info mpc8xx_scc_pdata = { | |
| .rx_ring = 64, | |
| .tx_ring = 8, | |
| .rx_copybreak = 240, | |
| .use_napi = 1, | |
| .napi_weight = 17, | |
| .phy_addr = -1, | |
| .phy_irq = -1, | |
| .bus_info = &scc_mii_bus_info, | |
| }; | |
| static struct fs_uart_platform_info mpc866_uart_pdata[] = { | |
| [fsid_smc1_uart] = { | |
| .brg = 1, | |
| .fs_no = fsid_smc1_uart, | |
| .init_ioports = setup_smc1_ioports, | |
| .tx_num_fifo = 4, | |
| .tx_buf_size = 32, | |
| .rx_num_fifo = 4, | |
| .rx_buf_size = 32, | |
| }, | |
| [fsid_smc2_uart] = { | |
| .brg = 2, | |
| .fs_no = fsid_smc2_uart, | |
| .init_ioports = setup_smc2_ioports, | |
| .tx_num_fifo = 4, | |
| .tx_buf_size = 32, | |
| .rx_num_fifo = 4, | |
| .rx_buf_size = 32, | |
| }, | |
| }; | |
| void __init board_init(void) | |
| { | |
| volatile cpm8xx_t *cp = cpmp; | |
| unsigned *bcsr_io; | |
| bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); | |
| if (bcsr_io == NULL) { | |
| printk(KERN_CRIT "Could not remap BCSR1\n"); | |
| return; | |
| } | |
| #ifdef CONFIG_SERIAL_CPM_SMC1 | |
| cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */ | |
| clrbits32(bcsr_io,(0x80000000 >> 7)); | |
| cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX); | |
| cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); | |
| #else | |
| setbits32(bcsr_io,(0x80000000 >> 7)); | |
| cp->cp_pbpar &= ~(0x000000c0); | |
| cp->cp_pbdir |= 0x000000c0; | |
| cp->cp_smc[0].smc_smcmr = 0; | |
| cp->cp_smc[0].smc_smce = 0; | |
| #endif | |
| #ifdef CONFIG_SERIAL_CPM_SMC2 | |
| cp->cp_simode &= ~(0xe0000000 >> 1); | |
| cp->cp_simode |= (0x20000000 >> 1); /* brg2 */ | |
| clrbits32(bcsr_io,(0x80000000 >> 13)); | |
| cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX); | |
| cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); | |
| #else | |
| clrbits32(bcsr_io,(0x80000000 >> 13)); | |
| cp->cp_pbpar &= ~(0x00000c00); | |
| cp->cp_pbdir |= 0x00000c00; | |
| cp->cp_smc[1].smc_smcmr = 0; | |
| cp->cp_smc[1].smc_smce = 0; | |
| #endif | |
| iounmap(bcsr_io); | |
| } | |
| static void setup_fec1_ioports(void) | |
| { | |
| immap_t *immap = (immap_t *) IMAP_ADDR; | |
| setbits16(&immap->im_ioport.iop_pdpar, 0x1fff); | |
| setbits16(&immap->im_ioport.iop_pddir, 0x1fff); | |
| } | |
| static void setup_scc1_ioports(void) | |
| { | |
| immap_t *immap = (immap_t *) IMAP_ADDR; | |
| unsigned *bcsr_io; | |
| bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); | |
| if (bcsr_io == NULL) { | |
| printk(KERN_CRIT "Could not remap BCSR1\n"); | |
| return; | |
| } | |
| /* Enable the PHY. | |
| */ | |
| clrbits32(bcsr_io,BCSR1_ETHEN); | |
| /* Configure port A pins for Txd and Rxd. | |
| */ | |
| /* Disable receive and transmit in case EPPC-Bug started it. | |
| */ | |
| setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD); | |
| clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD); | |
| clrbits16(&immap->im_ioport.iop_paodr, PA_ENET_TXD); | |
| /* Configure port C pins to enable CLSN and RENA. | |
| */ | |
| clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA); | |
| clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA); | |
| setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA); | |
| /* Configure port A for TCLK and RCLK. | |
| */ | |
| setbits16(&immap->im_ioport.iop_papar, PA_ENET_TCLK | PA_ENET_RCLK); | |
| clrbits16(&immap->im_ioport.iop_padir, PA_ENET_TCLK | PA_ENET_RCLK); | |
| clrbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA); | |
| clrbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA); | |
| /* Configure Serial Interface clock routing. | |
| * First, clear all SCC bits to zero, then set the ones we want. | |
| */ | |
| clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK); | |
| setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT); | |
| /* In the original SCC enet driver the following code is placed at | |
| the end of the initialization */ | |
| setbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA); | |
| setbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA); | |
| } | |
| static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) | |
| { | |
| struct fs_platform_info *fpi = pdev->dev.platform_data; | |
| volatile cpm8xx_t *cp; | |
| bd_t *bd = (bd_t *) __res; | |
| char *e; | |
| int i; | |
| /* Get pointer to Communication Processor */ | |
| cp = cpmp; | |
| switch (fs_no) { | |
| case fsid_fec1: | |
| fpi = &mpc8xx_fec_pdata[0]; | |
| fpi->init_ioports = &setup_fec1_ioports; | |
| break; | |
| case fsid_scc1: | |
| fpi = &mpc8xx_scc_pdata; | |
| fpi->init_ioports = &setup_scc1_ioports; | |
| break; | |
| default: | |
| printk(KERN_WARNING"Device %s is not supported!\n", pdev->name); | |
| return; | |
| } | |
| pdev->dev.platform_data = fpi; | |
| fpi->fs_no = fs_no; | |
| e = (unsigned char *)&bd->bi_enetaddr; | |
| for (i = 0; i < 6; i++) | |
| fpi->macaddr[i] = *e++; | |
| fpi->macaddr[5 - pdev->id]++; | |
| } | |
| static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev, | |
| int idx) | |
| { | |
| /* This is for FEC devices only */ | |
| if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) | |
| return; | |
| mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); | |
| } | |
| static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev, | |
| int idx) | |
| { | |
| /* This is for SCC devices only */ | |
| if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) | |
| return; | |
| mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); | |
| } | |
| static void setup_smc1_ioports(void) | |
| { | |
| immap_t *immap = (immap_t *) IMAP_ADDR; | |
| unsigned *bcsr_io; | |
| unsigned int iobits = 0x000000c0; | |
| bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); | |
| if (bcsr_io == NULL) { | |
| printk(KERN_CRIT "Could not remap BCSR1\n"); | |
| return; | |
| } | |
| clrbits32(bcsr_io,BCSR1_RS232EN_1); | |
| iounmap(bcsr_io); | |
| setbits32(&immap->im_cpm.cp_pbpar, iobits); | |
| clrbits32(&immap->im_cpm.cp_pbdir, iobits); | |
| clrbits16(&immap->im_cpm.cp_pbodr, iobits); | |
| } | |
| static void setup_smc2_ioports(void) | |
| { | |
| immap_t *immap = (immap_t *) IMAP_ADDR; | |
| unsigned *bcsr_io; | |
| unsigned int iobits = 0x00000c00; | |
| bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); | |
| if (bcsr_io == NULL) { | |
| printk(KERN_CRIT "Could not remap BCSR1\n"); | |
| return; | |
| } | |
| clrbits32(bcsr_io,BCSR1_RS232EN_2); | |
| iounmap(bcsr_io); | |
| #ifndef CONFIG_SERIAL_CPM_ALT_SMC2 | |
| setbits32(&immap->im_cpm.cp_pbpar, iobits); | |
| clrbits32(&immap->im_cpm.cp_pbdir, iobits); | |
| clrbits16(&immap->im_cpm.cp_pbodr, iobits); | |
| #else | |
| setbits16(&immap->im_ioport.iop_papar, iobits); | |
| clrbits16(&immap->im_ioport.iop_padir, iobits); | |
| clrbits16(&immap->im_ioport.iop_paodr, iobits); | |
| #endif | |
| } | |
| static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev, | |
| int idx) | |
| { | |
| bd_t *bd = (bd_t *) __res; | |
| struct fs_uart_platform_info *pinfo; | |
| int num = ARRAY_SIZE(mpc866_uart_pdata); | |
| int id = fs_uart_id_smc2fsid(idx); | |
| /* no need to alter anything if console */ | |
| if ((id <= num) && (!pdev->dev.platform_data)) { | |
| pinfo = &mpc866_uart_pdata[id]; | |
| pinfo->uart_clk = bd->bi_intfreq; | |
| pdev->dev.platform_data = pinfo; | |
| } | |
| } | |
| static int mpc866ads_platform_notify(struct device *dev) | |
| { | |
| static const struct platform_notify_dev_map dev_map[] = { | |
| { | |
| .bus_id = "fsl-cpm-fec", | |
| .rtn = mpc866ads_fixup_fec_enet_pdata, | |
| }, | |
| { | |
| .bus_id = "fsl-cpm-scc", | |
| .rtn = mpc866ads_fixup_scc_enet_pdata, | |
| }, | |
| { | |
| .bus_id = "fsl-cpm-smc:uart", | |
| .rtn = mpc866ads_fixup_uart_pdata | |
| }, | |
| { | |
| .bus_id = NULL | |
| } | |
| }; | |
| platform_notify_map(dev_map,dev); | |
| return 0; | |
| } | |
| int __init mpc866ads_init(void) | |
| { | |
| printk(KERN_NOTICE "mpc866ads: Init\n"); | |
| platform_notify = mpc866ads_platform_notify; | |
| ppc_sys_device_initfunc(); | |
| ppc_sys_device_disable_all(); | |
| #ifdef MPC8xx_SECOND_ETH_SCC1 | |
| ppc_sys_device_enable(MPC8xx_CPM_SCC1); | |
| #endif | |
| ppc_sys_device_enable(MPC8xx_CPM_FEC1); | |
| /* Since either of the uarts could be used as console, they need to ready */ | |
| #ifdef CONFIG_SERIAL_CPM_SMC1 | |
| ppc_sys_device_enable(MPC8xx_CPM_SMC1); | |
| ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART); | |
| #endif | |
| #ifdef CONFIG_SERIAL_CPM_SMC | |
| ppc_sys_device_enable(MPC8xx_CPM_SMC2); | |
| ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); | |
| #endif | |
| return 0; | |
| } | |
| /* | |
| To prevent confusion, console selection is gross: | |
| by 0 assumed SMC1 and by 1 assumed SMC2 | |
| */ | |
| struct platform_device* early_uart_get_pdev(int index) | |
| { | |
| bd_t *bd = (bd_t *) __res; | |
| struct fs_uart_platform_info *pinfo; | |
| struct platform_device* pdev = NULL; | |
| if(index) { /*assume SMC2 here*/ | |
| pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2]; | |
| pinfo = &mpc866_uart_pdata[1]; | |
| } else { /*over SMC1*/ | |
| pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1]; | |
| pinfo = &mpc866_uart_pdata[0]; | |
| } | |
| pinfo->uart_clk = bd->bi_intfreq; | |
| pdev->dev.platform_data = pinfo; | |
| ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR); | |
| return NULL; | |
| } | |
| arch_initcall(mpc866ads_init); |