| config FADS | |
| bool | |
| choice | |
| prompt "8xx Machine Type" | |
| depends on 8xx | |
| default RPXLITE | |
| config RPXLITE | |
| bool "RPX-Lite" | |
| ---help--- | |
| Single-board computers based around the PowerPC MPC8xx chips and | |
| intended for embedded applications. The following types are | |
| supported: | |
| RPX-Lite: | |
| Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823. | |
| RPX-Classic: | |
| Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on | |
| the MPC 860 | |
| BSE-IP: | |
| Bright Star Engineering ip-Engine. | |
| TQM823L: | |
| TQM850L: | |
| TQM855L: | |
| TQM860L: | |
| MPC8xx based family of mini modules, half credit card size, | |
| up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports, | |
| 2 x CAN bus interface, ... | |
| Manufacturer: TQ Components, www.tq-group.de | |
| Date of Release: October (?) 1999 | |
| End of Life: not yet :-) | |
| URL: | |
| - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf> | |
| - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf> | |
| - images: <http://www.denx.de/embedded-ppc-en.html> | |
| FPS850L: | |
| FingerPrint Sensor System (based on TQM850L) | |
| Manufacturer: IKENDI AG, <http://www.ikendi.com/> | |
| Date of Release: November 1999 | |
| End of life: end 2000 ? | |
| URL: see TQM850L | |
| IVMS8: | |
| MPC860 based board used in the "Integrated Voice Mail System", | |
| Small Version (8 voice channels) | |
| Manufacturer: Speech Design, <http://www.speech-design.de/> | |
| Date of Release: December 2000 (?) | |
| End of life: - | |
| URL: <http://www.speech-design.de/> | |
| IVML24: | |
| MPC860 based board used in the "Integrated Voice Mail System", | |
| Large Version (24 voice channels) | |
| Manufacturer: Speech Design, <http://www.speech-design.de/> | |
| Date of Release: March 2001 (?) | |
| End of life: - | |
| URL: <http://www.speech-design.de/> | |
| HERMES: | |
| Hermes-Pro ISDN/LAN router with integrated 8 x hub | |
| Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik | |
| <http://www.multidata.de/> | |
| Date of Release: 2000 (?) | |
| End of life: - | |
| URL: <http://www.multidata.de/english/products/hpro.htm> | |
| IP860: | |
| VMEBus IP (Industry Pack) carrier board with MPC860 | |
| Manufacturer: MicroSys GmbH, <http://www.microsys.de/> | |
| Date of Release: ? | |
| End of life: - | |
| URL: <http://www.microsys.de/html/ip860.html> | |
| PCU_E: | |
| PCU = Peripheral Controller Unit, Extended | |
| Manufacturer: Siemens AG, ICN (Information and Communication Networks) | |
| <http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html> | |
| Date of Release: April 2001 | |
| End of life: August 2001 | |
| URL: n. a. | |
| config RPXCLASSIC | |
| bool "RPX-Classic" | |
| help | |
| The RPX-Classic is a single-board computer based on the Motorola | |
| MPC860. It features 16MB of DRAM and a variable amount of flash, | |
| I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two | |
| LEDs. Variants with Ethernet ports exist. Say Y here to support it | |
| directly. | |
| config BSEIP | |
| bool "BSE-IP" | |
| help | |
| Say Y here to support the Bright Star Engineering ipEngine SBC. | |
| This is a credit-card-sized device featuring a MPC823 processor, | |
| 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video | |
| controller, and two RS232 ports. | |
| config MPC8XXFADS | |
| bool "FADS" | |
| select FADS | |
| config MPC86XADS | |
| bool "MPC86XADS" | |
| help | |
| MPC86x Application Development System by Freescale Semiconductor. | |
| The MPC86xADS is meant to serve as a platform for s/w and h/w | |
| development around the MPC86X processor families. | |
| select FADS | |
| config MPC885ADS | |
| bool "MPC885ADS" | |
| help | |
| Freescale Semiconductor MPC885 Application Development System (ADS). | |
| Also known as DUET. | |
| The MPC885ADS is meant to serve as a platform for s/w and h/w | |
| development around the MPC885 processor family. | |
| config TQM823L | |
| bool "TQM823L" | |
| help | |
| Say Y here to support the TQM823L, one of an MPC8xx-based family of | |
| mini SBCs (half credit-card size) from TQ Components first released | |
| in late 1999. Technical references are at | |
| <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and | |
| <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at | |
| <http://www.denx.de/embedded-ppc-en.html>. | |
| config TQM850L | |
| bool "TQM850L" | |
| help | |
| Say Y here to support the TQM850L, one of an MPC8xx-based family of | |
| mini SBCs (half credit-card size) from TQ Components first released | |
| in late 1999. Technical references are at | |
| <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and | |
| <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at | |
| <http://www.denx.de/embedded-ppc-en.html>. | |
| config TQM855L | |
| bool "TQM855L" | |
| help | |
| Say Y here to support the TQM855L, one of an MPC8xx-based family of | |
| mini SBCs (half credit-card size) from TQ Components first released | |
| in late 1999. Technical references are at | |
| <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and | |
| <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at | |
| <http://www.denx.de/embedded-ppc-en.html>. | |
| config TQM860L | |
| bool "TQM860L" | |
| help | |
| Say Y here to support the TQM860L, one of an MPC8xx-based family of | |
| mini SBCs (half credit-card size) from TQ Components first released | |
| in late 1999. Technical references are at | |
| <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and | |
| <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at | |
| <http://www.denx.de/embedded-ppc-en.html>. | |
| config FPS850L | |
| bool "FPS850L" | |
| config IVMS8 | |
| bool "IVMS8" | |
| help | |
| Say Y here to support the Integrated Voice-Mail Small 8-channel SBC | |
| from Speech Design, released March 2001. The manufacturer's website | |
| is at <http://www.speech-design.de/>. | |
| config IVML24 | |
| bool "IVML24" | |
| help | |
| Say Y here to support the Integrated Voice-Mail Large 24-channel SBC | |
| from Speech Design, released March 2001. The manufacturer's website | |
| is at <http://www.speech-design.de/>. | |
| config HERMES_PRO | |
| bool "HERMES" | |
| config IP860 | |
| bool "IP860" | |
| config LWMON | |
| bool "LWMON" | |
| config PCU_E | |
| bool "PCU_E" | |
| config CCM | |
| bool "CCM" | |
| config LANTEC | |
| bool "LANTEC" | |
| config MBX | |
| bool "MBX" | |
| help | |
| MBX is a line of Motorola single-board computer based around the | |
| MPC821 and MPC860 processors, and intended for embedded-controller | |
| applications. Say Y here to support these boards directly. | |
| config WINCEPT | |
| bool "WinCept" | |
| help | |
| The Wincept 100/110 is a Motorola single-board computer based on the | |
| MPC821 PowerPC, introduced in 1998 and designed to be used in | |
| thin-client machines. Say Y to support it directly. | |
| endchoice | |
| # | |
| # MPC8xx Communication options | |
| # | |
| menu "MPC8xx CPM Options" | |
| depends on 8xx | |
| config SCC_ENET | |
| bool "CPM SCC Ethernet" | |
| depends on NET_ETHERNET | |
| help | |
| Enable Ethernet support via the Motorola MPC8xx serial | |
| communications controller. | |
| choice | |
| prompt "SCC used for Ethernet" | |
| depends on SCC_ENET | |
| default SCC1_ENET | |
| config SCC1_ENET | |
| bool "SCC1" | |
| help | |
| Use MPC8xx serial communications controller 1 to drive Ethernet | |
| (default). | |
| config SCC2_ENET | |
| bool "SCC2" | |
| help | |
| Use MPC8xx serial communications controller 2 to drive Ethernet. | |
| config SCC3_ENET | |
| bool "SCC3" | |
| help | |
| Use MPC8xx serial communications controller 3 to drive Ethernet. | |
| endchoice | |
| config FEC_ENET | |
| bool "860T FEC Ethernet" | |
| depends on NET_ETHERNET | |
| help | |
| Enable Ethernet support via the Fast Ethernet Controller (FCC) on | |
| the Motorola MPC8260. | |
| config USE_MDIO | |
| bool "Use MDIO for PHY configuration" | |
| depends on FEC_ENET | |
| help | |
| On some boards the hardware configuration of the ethernet PHY can be | |
| used without any software interaction over the MDIO interface, so | |
| all MII code can be omitted. Say N here if unsure or if you don't | |
| need link status reports. | |
| config FEC_AM79C874 | |
| bool "Support AMD79C874 PHY" | |
| depends on USE_MDIO | |
| config FEC_LXT970 | |
| bool "Support LXT970 PHY" | |
| depends on USE_MDIO | |
| config FEC_LXT971 | |
| bool "Support LXT971 PHY" | |
| depends on USE_MDIO | |
| config FEC_QS6612 | |
| bool "Support QS6612 PHY" | |
| depends on USE_MDIO | |
| config ENET_BIG_BUFFERS | |
| bool "Use Big CPM Ethernet Buffers" | |
| depends on SCC_ENET || FEC_ENET | |
| help | |
| Allocate large buffers for MPC8xx Ethernet. Increases throughput | |
| and decreases the likelihood of dropped packets, but costs memory. | |
| config HTDMSOUND | |
| bool "Embedded Planet HIOX Audio" | |
| depends on SOUND=y | |
| # This doesn't really belong here, but it is convenient to ask | |
| # 8xx specific questions. | |
| comment "Generic MPC8xx Options" | |
| config 8xx_COPYBACK | |
| bool "Copy-Back Data Cache (else Writethrough)" | |
| help | |
| Saying Y here will cause the cache on an MPC8xx processor to be used | |
| in Copy-Back mode. If you say N here, it is used in Writethrough | |
| mode. | |
| If in doubt, say Y here. | |
| config 8xx_CPU6 | |
| bool "CPU6 Silicon Errata (860 Pre Rev. C)" | |
| help | |
| MPC860 CPUs, prior to Rev C have some bugs in the silicon, which | |
| require workarounds for Linux (and most other OSes to work). If you | |
| get a BUG() very early in boot, this might fix the problem. For | |
| more details read the document entitled "MPC860 Family Device Errata | |
| Reference" on Motorola's website. This option also incurs a | |
| performance hit. | |
| If in doubt, say N here. | |
| choice | |
| prompt "Microcode patch selection" | |
| default NO_UCODE_PATCH | |
| help | |
| Help not implemented yet, coming soon. | |
| config NO_UCODE_PATCH | |
| bool "None" | |
| config USB_SOF_UCODE_PATCH | |
| bool "USB SOF patch" | |
| help | |
| Help not implemented yet, coming soon. | |
| config I2C_SPI_UCODE_PATCH | |
| bool "I2C/SPI relocation patch" | |
| help | |
| Help not implemented yet, coming soon. | |
| config I2C_SPI_SMC1_UCODE_PATCH | |
| bool "I2C/SPI/SMC1 relocation patch" | |
| help | |
| Help not implemented yet, coming soon. | |
| endchoice | |
| config UCODE_PATCH | |
| bool | |
| default y | |
| depends on !NO_UCODE_PATCH | |
| endmenu | |