| /* | |
| * setup.c | |
| * | |
| * BRIEF MODULE DESCRIPTION | |
| * Momentum Computer Ocelot-3 board dependent boot routines | |
| * | |
| * Copyright (C) 1996, 1997, 01, 05 Ralf Baechle | |
| * Copyright (C) 2000 RidgeRun, Inc. | |
| * Copyright (C) 2001 Red Hat, Inc. | |
| * Copyright (C) 2002 Momentum Computer | |
| * | |
| * Author: Matthew Dharm, Momentum Computer | |
| * mdharm@momenco.com | |
| * | |
| * Louis Hamilton, Red Hat, Inc. | |
| * hamilton@redhat.com [MIPS64 modifications] | |
| * | |
| * Author: RidgeRun, Inc. | |
| * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com | |
| * | |
| * Copyright 2001 MontaVista Software Inc. | |
| * Author: jsun@mvista.com or jsun@junsun.net | |
| * | |
| * Copyright 2004 PMC-Sierra | |
| * Author: Manish Lachwani (lachwani@pmc-sierra.com) | |
| * | |
| * Copyright (C) 2004 MontaVista Software Inc. | |
| * Author: Manish Lachwani, mlachwani@mvista.com | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN | |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF | |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/mc146818rtc.h> | |
| #include <linux/ioport.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/pci.h> | |
| #include <linux/timex.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/mv643xx.h> | |
| #include <linux/pm.h> | |
| #include <linux/bcd.h> | |
| #include <asm/time.h> | |
| #include <asm/page.h> | |
| #include <asm/bootinfo.h> | |
| #include <asm/io.h> | |
| #include <asm/irq.h> | |
| #include <asm/pci.h> | |
| #include <asm/processor.h> | |
| #include <asm/ptrace.h> | |
| #include <asm/reboot.h> | |
| #include <asm/mc146818rtc.h> | |
| #include <asm/tlbflush.h> | |
| #include "ocelot_3_fpga.h" | |
| /* Marvell Discovery Register Base */ | |
| unsigned long marvell_base = (signed)0xf4000000; | |
| /* CPU clock */ | |
| unsigned long cpu_clock; | |
| /* RTC/NVRAM */ | |
| unsigned char* rtc_base = (unsigned char*)(signed)0xfc800000; | |
| /* FPGA Base */ | |
| unsigned long ocelot_fpga_base = (signed)0xfc000000; | |
| /* Serial base */ | |
| unsigned long uart_base = (signed)0xfd000000; | |
| /* | |
| * Marvell Discovery SRAM. This is one place where Ethernet | |
| * Tx and Rx descriptors can be placed to improve performance | |
| */ | |
| extern unsigned long mv64340_sram_base; | |
| /* These functions are used for rebooting or halting the machine*/ | |
| extern void momenco_ocelot_restart(char *command); | |
| extern void momenco_ocelot_halt(void); | |
| extern void momenco_ocelot_power_off(void); | |
| void momenco_time_init(void); | |
| static char reset_reason; | |
| void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, | |
| unsigned long entryhi, unsigned long pagemask); | |
| static inline unsigned long ENTRYLO(unsigned long paddr) | |
| { | |
| return ((paddr & PAGE_MASK) | | |
| (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL | | |
| _CACHE_UNCACHED)) >> 6; | |
| } | |
| void __init bus_error_init(void) | |
| { | |
| /* nothing */ | |
| } | |
| /* | |
| * setup code for a handoff from a version 2 PMON 2000 PROM | |
| */ | |
| void setup_wired_tlb_entries(void) | |
| { | |
| write_c0_wired(0); | |
| local_flush_tlb_all(); | |
| /* marvell and extra space */ | |
| add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), (signed)0xf4000000, PM_64K); | |
| /* fpga, rtc, and uart */ | |
| add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), (signed)0xfc000000, PM_16M); | |
| } | |
| unsigned long m48t37y_get_time(void) | |
| { | |
| unsigned int year, month, day, hour, min, sec; | |
| unsigned long flags; | |
| spin_lock_irqsave(&rtc_lock, flags); | |
| /* stop the update */ | |
| rtc_base[0x7ff8] = 0x40; | |
| year = BCD2BIN(rtc_base[0x7fff]); | |
| year += BCD2BIN(rtc_base[0x7ff1]) * 100; | |
| month = BCD2BIN(rtc_base[0x7ffe]); | |
| day = BCD2BIN(rtc_base[0x7ffd]); | |
| hour = BCD2BIN(rtc_base[0x7ffb]); | |
| min = BCD2BIN(rtc_base[0x7ffa]); | |
| sec = BCD2BIN(rtc_base[0x7ff9]); | |
| /* start the update */ | |
| rtc_base[0x7ff8] = 0x00; | |
| spin_unlock_irqrestore(&rtc_lock, flags); | |
| return mktime(year, month, day, hour, min, sec); | |
| } | |
| int m48t37y_set_time(unsigned long sec) | |
| { | |
| struct rtc_time tm; | |
| unsigned long flags; | |
| /* convert to a more useful format -- note months count from 0 */ | |
| to_tm(sec, &tm); | |
| tm.tm_mon += 1; | |
| spin_lock_irqsave(&rtc_lock, flags); | |
| /* enable writing */ | |
| rtc_base[0x7ff8] = 0x80; | |
| /* year */ | |
| rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100); | |
| rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100); | |
| /* month */ | |
| rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon); | |
| /* day */ | |
| rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday); | |
| /* hour/min/sec */ | |
| rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour); | |
| rtc_base[0x7ffa] = BIN2BCD(tm.tm_min); | |
| rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec); | |
| /* day of week -- not really used, but let's keep it up-to-date */ | |
| rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1); | |
| /* disable writing */ | |
| rtc_base[0x7ff8] = 0x00; | |
| spin_unlock_irqrestore(&rtc_lock, flags); | |
| return 0; | |
| } | |
| void momenco_timer_setup(struct irqaction *irq) | |
| { | |
| setup_irq(7, irq); /* Timer interrupt, unmask status IM7 */ | |
| } | |
| void momenco_time_init(void) | |
| { | |
| setup_wired_tlb_entries(); | |
| /* | |
| * Ocelot-3 board has been built with both | |
| * the Rm7900 and the Rm7065C | |
| */ | |
| mips_hpt_frequency = cpu_clock / 2; | |
| board_timer_setup = momenco_timer_setup; | |
| rtc_mips_get_time = m48t37y_get_time; | |
| rtc_mips_set_time = m48t37y_set_time; | |
| } | |
| /* | |
| * PCI Support for Ocelot-3 | |
| */ | |
| /* Bus #0 IO and MEM space */ | |
| #define OCELOT_3_PCI_IO_0_START 0xe0000000 | |
| #define OCELOT_3_PCI_IO_0_SIZE 0x08000000 | |
| #define OCELOT_3_PCI_MEM_0_START 0xc0000000 | |
| #define OCELOT_3_PCI_MEM_0_SIZE 0x10000000 | |
| /* Bus #1 IO and MEM space */ | |
| #define OCELOT_3_PCI_IO_1_START 0xe8000000 | |
| #define OCELOT_3_PCI_IO_1_SIZE 0x08000000 | |
| #define OCELOT_3_PCI_MEM_1_START 0xd0000000 | |
| #define OCELOT_3_PCI_MEM_1_SIZE 0x10000000 | |
| static struct resource mv_pci_io_mem0_resource = { | |
| .name = "MV64340 PCI0 IO MEM", | |
| .start = OCELOT_3_PCI_IO_0_START, | |
| .end = OCELOT_3_PCI_IO_0_START + OCELOT_3_PCI_IO_0_SIZE - 1, | |
| .flags = IORESOURCE_IO, | |
| }; | |
| static struct resource mv_pci_io_mem1_resource = { | |
| .name = "MV64340 PCI1 IO MEM", | |
| .start = OCELOT_3_PCI_IO_1_START, | |
| .end = OCELOT_3_PCI_IO_1_START + OCELOT_3_PCI_IO_1_SIZE - 1, | |
| .flags = IORESOURCE_IO, | |
| }; | |
| static struct resource mv_pci_mem0_resource = { | |
| .name = "MV64340 PCI0 MEM", | |
| .start = OCELOT_3_PCI_MEM_0_START, | |
| .end = OCELOT_3_PCI_MEM_0_START + OCELOT_3_PCI_MEM_0_SIZE - 1, | |
| .flags = IORESOURCE_MEM, | |
| }; | |
| static struct resource mv_pci_mem1_resource = { | |
| .name = "MV64340 PCI1 MEM", | |
| .start = OCELOT_3_PCI_MEM_1_START, | |
| .end = OCELOT_3_PCI_MEM_1_START + OCELOT_3_PCI_MEM_1_SIZE - 1, | |
| .flags = IORESOURCE_MEM, | |
| }; | |
| static struct mv_pci_controller mv_bus0_controller = { | |
| .pcic = { | |
| .pci_ops = &mv_pci_ops, | |
| .mem_resource = &mv_pci_mem0_resource, | |
| .io_resource = &mv_pci_io_mem0_resource, | |
| }, | |
| .config_addr = MV64340_PCI_0_CONFIG_ADDR, | |
| .config_vreg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG, | |
| }; | |
| static struct mv_pci_controller mv_bus1_controller = { | |
| .pcic = { | |
| .pci_ops = &mv_pci_ops, | |
| .mem_resource = &mv_pci_mem1_resource, | |
| .io_resource = &mv_pci_io_mem1_resource, | |
| }, | |
| .config_addr = MV64340_PCI_1_CONFIG_ADDR, | |
| .config_vreg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG, | |
| }; | |
| static __init int __init ja_pci_init(void) | |
| { | |
| uint32_t enable; | |
| extern int pci_probe_only; | |
| /* PMON will assign PCI resources */ | |
| pci_probe_only = 1; | |
| enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE); | |
| /* | |
| * We require at least one enabled I/O or PCI memory window or we | |
| * will ignore this PCI bus. We ignore PCI windows 1, 2 and 3. | |
| */ | |
| if (enable & (0x01 << 9) || enable & (0x01 << 10)) | |
| register_pci_controller(&mv_bus0_controller.pcic); | |
| if (enable & (0x01 << 14) || enable & (0x01 << 15)) | |
| register_pci_controller(&mv_bus1_controller.pcic); | |
| ioport_resource.end = OCELOT_3_PCI_IO_0_START + OCELOT_3_PCI_IO_0_SIZE + | |
| OCELOT_3_PCI_IO_1_SIZE - 1; | |
| iomem_resource.end = OCELOT_3_PCI_MEM_0_START + OCELOT_3_PCI_MEM_0_SIZE + | |
| OCELOT_3_PCI_MEM_1_SIZE - 1; | |
| set_io_port_base(OCELOT_3_PCI_IO_0_START); /* mips_io_port_base */ | |
| return 0; | |
| } | |
| arch_initcall(ja_pci_init); | |
| void __init plat_mem_setup(void) | |
| { | |
| unsigned int tmpword; | |
| board_time_init = momenco_time_init; | |
| _machine_restart = momenco_ocelot_restart; | |
| _machine_halt = momenco_ocelot_halt; | |
| pm_power_off = momenco_ocelot_power_off; | |
| /* Wired TLB entries */ | |
| setup_wired_tlb_entries(); | |
| /* shut down ethernet ports, just to be sure our memory doesn't get | |
| * corrupted by random ethernet traffic. | |
| */ | |
| MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); | |
| MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); | |
| MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); | |
| MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); | |
| do {} | |
| while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); | |
| do {} | |
| while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); | |
| do {} | |
| while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); | |
| do {} | |
| while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); | |
| MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0), | |
| MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); | |
| MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1), | |
| MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); | |
| /* Turn off the Bit-Error LED */ | |
| OCELOT_FPGA_WRITE(0x80, CLR); | |
| tmpword = OCELOT_FPGA_READ(BOARDREV); | |
| if (tmpword < 26) | |
| printk("Momenco Ocelot-3: Board Assembly Rev. %c\n", | |
| 'A'+tmpword); | |
| else | |
| printk("Momenco Ocelot-3: Board Assembly Revision #0x%x\n", | |
| tmpword); | |
| tmpword = OCELOT_FPGA_READ(FPGA_REV); | |
| printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15); | |
| tmpword = OCELOT_FPGA_READ(RESET_STATUS); | |
| printk("Reset reason: 0x%x\n", tmpword); | |
| switch (tmpword) { | |
| case 0x1: | |
| printk(" - Power-up reset\n"); | |
| break; | |
| case 0x2: | |
| printk(" - Push-button reset\n"); | |
| break; | |
| case 0x4: | |
| printk(" - cPCI bus reset\n"); | |
| break; | |
| case 0x8: | |
| printk(" - Watchdog reset\n"); | |
| break; | |
| case 0x10: | |
| printk(" - Software reset\n"); | |
| break; | |
| default: | |
| printk(" - Unknown reset cause\n"); | |
| } | |
| reset_reason = tmpword; | |
| OCELOT_FPGA_WRITE(0xff, RESET_STATUS); | |
| tmpword = OCELOT_FPGA_READ(CPCI_ID); | |
| printk("cPCI ID register: 0x%02x\n", tmpword); | |
| printk(" - Slot number: %d\n", tmpword & 0x1f); | |
| printk(" - PCI bus present: %s\n", tmpword & 0x40 ? "yes" : "no"); | |
| printk(" - System Slot: %s\n", tmpword & 0x20 ? "yes" : "no"); | |
| tmpword = OCELOT_FPGA_READ(BOARD_STATUS); | |
| printk("Board Status register: 0x%02x\n", tmpword); | |
| printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent"); | |
| printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent"); | |
| printk(" - L3 cache size: %d MB\n", (1<<((tmpword&12) >> 2))&~1); | |
| /* Support for 128 MB memory */ | |
| add_memory_region(0x0, 0x08000000, BOOT_MEM_RAM); | |
| } |