| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP | |
| M68000 Hi-Performance Microprocessor Division | |
| M68060 Software Package | |
| Production Release P1.00 -- October 10, 1994 | |
| M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. | |
| THE SOFTWARE is provided on an "AS IS" basis and without warranty. | |
| To the maximum extent permitted by applicable law, | |
| MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, | |
| INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE | |
| and any warranty against infringement with regard to the SOFTWARE | |
| (INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials. | |
| To the maximum extent permitted by applicable law, | |
| IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER | |
| (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, | |
| BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) | |
| ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE. | |
| Motorola assumes no responsibility for the maintenance and support of the SOFTWARE. | |
| You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE | |
| so long as this entire notice is retained without alteration in any modified and/or | |
| redistributed versions, and that such modified versions are clearly identified as such. | |
| No licenses are granted by implication, estoppel or otherwise under any patents | |
| or trademarks of Motorola, Inc. | |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| CHANGES SINCE LAST RELEASE: | |
| --------------------------- | |
| 1) "movep" emulation where data was being read from memory | |
| was reading the intermediate bytes. Emulation now only | |
| reads the required bytes. | |
| 2) "flogn", "flog2", and "flog10" of "1" was setting the | |
| Inexact FPSR bit. Emulation now does not set Inexact for | |
| this case. | |
| 3) For an opclass three FP instruction where the effective addressing | |
| mode was pre-decrement or post-increment and the address register | |
| was A0 or A1, the address register was not being updated as a result | |
| of the operation. This has been corrected. | |
| 4) Beta B.2 version had the following erratum: | |
| Scenario: | |
| --------- | |
| If {i,d}mem_{read,write}_{byte,word,long}() returns | |
| a failing value to the 68060SP, the package ignores | |
| this return value and continues with program execution | |
| as if it never received a failing value. | |
| Effect: | |
| ------- | |
| For example, if a user executed "fsin.x ADDR,fp0" where | |
| ADDR should cause a "segmentation violation", the memory read | |
| requested by the package should return a failing value | |
| to the package. Since the package currently ignores this | |
| return value, the user program will continue to the | |
| next instruction, and the result created in fp0 will be | |
| undefined. | |
| Fix: | |
| ---- | |
| This has been fixed in the current release. | |
| Notes: | |
| ------ | |
| Upon receiving a non-zero (failing) return value from | |
| a {i,d}mem_{read,write}_{byte,word,long}() "call-out", | |
| the package creates a 16-byte access error stack frame | |
| from the current exception stack frame and exits | |
| through the "call-out" _real_access(). This is the process | |
| as described in the MC68060 User's Manual. | |
| For instruction read access errors, the info stacked is: | |
| SR = SR at time of exception | |
| PC = PC of instruction being emulated | |
| VOFF = $4008 (stack frame format type) | |
| ADDRESS = PC of instruction being emulated | |
| FSLW = FAULT STATUS LONGWORD | |
| The valid FSLW bits are: | |
| bit 27 = 1 (misaligned bit) | |
| bit 24 = 1 (read) | |
| bit 23 = 0 (write) | |
| bit 22:21 = 10 (SIZE = word) | |
| bit 20:19 = 00 (TT) | |
| bit 18:16 = x10 (TM; x = 1 for supervisor mode) | |
| bit 15 = 1 (IO) | |
| bit 0 = 1 (Software Emulation Error) | |
| all other bits are EQUAL TO ZERO and can be set by the _real_access() | |
| "call-out" stub by the user as appropriate. The MC68060 User's Manual | |
| stated that ONLY "bit 0" would be set. The 060SP attempts to set a few | |
| other bits. | |
| For data read/write access errors, the info stacked is: | |
| SR = SR at time of exception | |
| PC = PC of instruction being emulated | |
| VOFF = $4008 (stack frame format type) | |
| ADDRESS = Address of source or destination operand | |
| FSLW = FAULT STATUS LONGWORD | |
| The valid FSLW bits are: | |
| bit 27 = 0 (misaligned bit) | |
| bit 24 = x (read; 1 if read, 0 if write) | |
| bit 23 = x (write; 1 if write, 0 if read) | |
| bit 22:21 = xx (SIZE; see MC68060 User's Manual) | |
| bit 20:19 = 00 (TT) | |
| bit 18:16 = x01 (TM; x = 1 for supervisor mode) | |
| bit 15 = 0 (IO) | |
| bit 0 = 1 (Software Emulation Error) | |
| all other bits are EQUAL TO ZERO and can be set by the _real_access() | |
| "call-out" stub by the user as appropriate. The MC68060 User's Manual | |
| stated that ONLY "bit 0" would be set. The 060SP attempts to set a few | |
| other bits. |