| if ARCH_PXA | |
| menu "Intel PXA2xx Implementations" | |
| choice | |
| prompt "Select target board" | |
| config ARCH_LUBBOCK | |
| bool "Intel DBPXA250 Development Platform" | |
| select PXA25x | |
| select SA1111 | |
| config MACH_LOGICPD_PXA270 | |
| bool "LogicPD PXA270 Card Engine Development Platform" | |
| select PXA27x | |
| select IWMMXT | |
| config MACH_MAINSTONE | |
| bool "Intel HCDDBBVA0 Development Platform" | |
| select PXA27x | |
| select IWMMXT | |
| config ARCH_PXA_IDP | |
| bool "Accelent Xscale IDP" | |
| select PXA25x | |
| config PXA_SHARPSL | |
| bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" | |
| select SHARP_SCOOP | |
| select SHARP_PARAM | |
| help | |
| Say Y here if you intend to run this kernel on a | |
| Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), | |
| SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), | |
| SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) | |
| handheld computer. | |
| endchoice | |
| if PXA_SHARPSL | |
| choice | |
| prompt "Select target Sharp Zaurus device range" | |
| config PXA_SHARPSL_25x | |
| bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)" | |
| select PXA25x | |
| config PXA_SHARPSL_27x | |
| bool "Sharp PXA270 models (SL-Cxx00)" | |
| select PXA27x | |
| select IWMMXT | |
| endchoice | |
| endif | |
| endmenu | |
| config MACH_POODLE | |
| bool "Enable Sharp SL-5600 (Poodle) Support" | |
| depends PXA_SHARPSL_25x | |
| select SHARP_LOCOMO | |
| select PXA_SSP | |
| config MACH_CORGI | |
| bool "Enable Sharp SL-C700 (Corgi) Support" | |
| depends PXA_SHARPSL_25x | |
| select PXA_SHARP_C7xx | |
| config MACH_SHEPHERD | |
| bool "Enable Sharp SL-C750 (Shepherd) Support" | |
| depends PXA_SHARPSL_25x | |
| select PXA_SHARP_C7xx | |
| config MACH_HUSKY | |
| bool "Enable Sharp SL-C760 (Husky) Support" | |
| depends PXA_SHARPSL_25x | |
| select PXA_SHARP_C7xx | |
| config MACH_AKITA | |
| bool "Enable Sharp SL-1000 (Akita) Support" | |
| depends PXA_SHARPSL_27x | |
| select PXA_SHARP_Cxx00 | |
| select MACH_SPITZ | |
| select I2C | |
| select I2C_PXA | |
| config MACH_SPITZ | |
| bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" | |
| depends PXA_SHARPSL_27x | |
| select PXA_SHARP_Cxx00 | |
| config MACH_BORZOI | |
| bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" | |
| depends PXA_SHARPSL_27x | |
| select PXA_SHARP_Cxx00 | |
| config MACH_TOSA | |
| bool "Enable Sharp SL-6000x (Tosa) Support" | |
| depends PXA_SHARPSL_25x | |
| config PXA25x | |
| bool | |
| help | |
| Select code specific to PXA21x/25x/26x variants | |
| config PXA27x | |
| bool | |
| help | |
| Select code specific to PXA27x variants | |
| config IWMMXT | |
| bool | |
| help | |
| Enable support for iWMMXt | |
| config PXA_SHARP_C7xx | |
| bool | |
| select PXA_SSP | |
| select SHARPSL_PM | |
| help | |
| Enable support for all Sharp C7xx models | |
| config PXA_SHARP_Cxx00 | |
| bool | |
| select PXA_SSP | |
| select SHARPSL_PM | |
| help | |
| Enable common support for Sharp Cxx00 models | |
| config PXA_SSP | |
| tristate | |
| help | |
| Enable support for PXA2xx SSP ports | |
| endif |