| /* |
| * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include "mt76x2u.h" |
| #include "mt76x2_eeprom.h" |
| |
| void mt76x2u_phy_set_rxpath(struct mt76x2_dev *dev) |
| { |
| u32 val; |
| |
| val = mt76_rr(dev, MT_BBP(AGC, 0)); |
| val &= ~BIT(4); |
| |
| switch (dev->chainmask & 0xf) { |
| case 2: |
| val |= BIT(3); |
| break; |
| default: |
| val &= ~BIT(3); |
| break; |
| } |
| mt76_wr(dev, MT_BBP(AGC, 0), val); |
| } |
| |
| void mt76x2u_phy_set_txdac(struct mt76x2_dev *dev) |
| { |
| int txpath; |
| |
| txpath = (dev->chainmask >> 8) & 0xf; |
| switch (txpath) { |
| case 2: |
| mt76_set(dev, MT_BBP(TXBE, 5), 0x3); |
| break; |
| default: |
| mt76_clear(dev, MT_BBP(TXBE, 5), 0x3); |
| break; |
| } |
| } |
| |
| void mt76x2u_phy_channel_calibrate(struct mt76x2_dev *dev) |
| { |
| struct ieee80211_channel *chan = dev->mt76.chandef.chan; |
| bool is_5ghz = chan->band == NL80211_BAND_5GHZ; |
| |
| if (mt76x2_channel_silent(dev)) |
| return; |
| |
| mt76x2u_mac_stop(dev); |
| |
| if (is_5ghz) |
| mt76x2u_mcu_calibrate(dev, MCU_CAL_LC, 0); |
| |
| mt76x2u_mcu_calibrate(dev, MCU_CAL_TX_LOFT, is_5ghz); |
| mt76x2u_mcu_calibrate(dev, MCU_CAL_TXIQ, is_5ghz); |
| mt76x2u_mcu_calibrate(dev, MCU_CAL_RXIQC_FI, is_5ghz); |
| mt76x2u_mcu_calibrate(dev, MCU_CAL_TEMP_SENSOR, 0); |
| |
| mt76x2u_mac_resume(dev); |
| } |
| |
| static void |
| mt76x2u_phy_tssi_compensate(struct mt76x2_dev *dev) |
| { |
| struct ieee80211_channel *chan = dev->mt76.chandef.chan; |
| struct mt76x2_tx_power_info txp; |
| struct mt76x2_tssi_comp t = {}; |
| |
| if (!dev->cal.tssi_cal_done) |
| return; |
| |
| if (!dev->cal.tssi_comp_pending) { |
| /* TSSI trigger */ |
| t.cal_mode = BIT(0); |
| mt76x2u_mcu_tssi_comp(dev, &t); |
| dev->cal.tssi_comp_pending = true; |
| } else { |
| if (mt76_rr(dev, MT_BBP(CORE, 34)) & BIT(4)) |
| return; |
| |
| dev->cal.tssi_comp_pending = false; |
| mt76x2_get_power_info(dev, &txp, chan); |
| |
| if (mt76x2_ext_pa_enabled(dev, chan->band)) |
| t.pa_mode = 1; |
| |
| t.cal_mode = BIT(1); |
| t.slope0 = txp.chain[0].tssi_slope; |
| t.offset0 = txp.chain[0].tssi_offset; |
| t.slope1 = txp.chain[1].tssi_slope; |
| t.offset1 = txp.chain[1].tssi_offset; |
| mt76x2u_mcu_tssi_comp(dev, &t); |
| |
| if (t.pa_mode || dev->cal.dpd_cal_done) |
| return; |
| |
| usleep_range(10000, 20000); |
| mt76x2u_mcu_calibrate(dev, MCU_CAL_DPD, chan->hw_value); |
| dev->cal.dpd_cal_done = true; |
| } |
| } |
| |
| static void |
| mt76x2u_phy_update_channel_gain(struct mt76x2_dev *dev) |
| { |
| u8 channel = dev->mt76.chandef.chan->hw_value; |
| int freq, freq1; |
| u32 false_cca; |
| |
| freq = dev->mt76.chandef.chan->center_freq; |
| freq1 = dev->mt76.chandef.center_freq1; |
| |
| switch (dev->mt76.chandef.width) { |
| case NL80211_CHAN_WIDTH_80: { |
| int ch_group_index; |
| |
| ch_group_index = (freq - freq1 + 30) / 20; |
| if (WARN_ON(ch_group_index < 0 || ch_group_index > 3)) |
| ch_group_index = 0; |
| channel += 6 - ch_group_index * 4; |
| break; |
| } |
| case NL80211_CHAN_WIDTH_40: |
| if (freq1 > freq) |
| channel += 2; |
| else |
| channel -= 2; |
| break; |
| default: |
| break; |
| } |
| |
| dev->cal.avg_rssi_all = mt76x2_phy_get_min_avg_rssi(dev); |
| false_cca = FIELD_GET(MT_RX_STAT_1_CCA_ERRORS, |
| mt76_rr(dev, MT_RX_STAT_1)); |
| |
| mt76x2u_mcu_set_dynamic_vga(dev, channel, false, false, |
| dev->cal.avg_rssi_all, false_cca); |
| } |
| |
| void mt76x2u_phy_calibrate(struct work_struct *work) |
| { |
| struct mt76x2_dev *dev; |
| |
| dev = container_of(work, struct mt76x2_dev, cal_work.work); |
| mt76x2u_phy_tssi_compensate(dev); |
| mt76x2u_phy_update_channel_gain(dev); |
| |
| ieee80211_queue_delayed_work(mt76_hw(dev), &dev->cal_work, |
| MT_CALIBRATE_INTERVAL); |
| } |
| |
| int mt76x2u_phy_set_channel(struct mt76x2_dev *dev, |
| struct cfg80211_chan_def *chandef) |
| { |
| u32 ext_cca_chan[4] = { |
| [0] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 0) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 1) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(0)), |
| [1] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 1) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 0) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(1)), |
| [2] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 2) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 3) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(2)), |
| [3] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 3) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 2) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(3)), |
| }; |
| bool scan = test_bit(MT76_SCANNING, &dev->mt76.state); |
| struct ieee80211_channel *chan = chandef->chan; |
| u8 channel = chan->hw_value, bw, bw_index; |
| int ch_group_index, freq, freq1, ret; |
| |
| dev->cal.channel_cal_done = false; |
| freq = chandef->chan->center_freq; |
| freq1 = chandef->center_freq1; |
| |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_40: |
| bw = 1; |
| if (freq1 > freq) { |
| bw_index = 1; |
| ch_group_index = 0; |
| } else { |
| bw_index = 3; |
| ch_group_index = 1; |
| } |
| channel += 2 - ch_group_index * 4; |
| break; |
| case NL80211_CHAN_WIDTH_80: |
| ch_group_index = (freq - freq1 + 30) / 20; |
| if (WARN_ON(ch_group_index < 0 || ch_group_index > 3)) |
| ch_group_index = 0; |
| bw = 2; |
| bw_index = ch_group_index; |
| channel += 6 - ch_group_index * 4; |
| break; |
| default: |
| bw = 0; |
| bw_index = 0; |
| ch_group_index = 0; |
| break; |
| } |
| |
| mt76x2_read_rx_gain(dev); |
| mt76x2_phy_set_txpower_regs(dev, chan->band); |
| mt76x2_configure_tx_delay(dev, chan->band, bw); |
| mt76x2_phy_set_txpower(dev); |
| |
| mt76x2_phy_set_band(dev, chan->band, ch_group_index & 1); |
| mt76x2_phy_set_bw(dev, chandef->width, ch_group_index); |
| |
| mt76_rmw(dev, MT_EXT_CCA_CFG, |
| (MT_EXT_CCA_CFG_CCA0 | |
| MT_EXT_CCA_CFG_CCA1 | |
| MT_EXT_CCA_CFG_CCA2 | |
| MT_EXT_CCA_CFG_CCA3 | |
| MT_EXT_CCA_CFG_CCA_MASK), |
| ext_cca_chan[ch_group_index]); |
| |
| ret = mt76x2u_mcu_set_channel(dev, channel, bw, bw_index, scan); |
| if (ret) |
| return ret; |
| |
| mt76x2u_mcu_init_gain(dev, channel, dev->cal.rx.mcu_gain, true); |
| |
| /* Enable LDPC Rx */ |
| if (mt76xx_rev(dev) >= MT76XX_REV_E3) |
| mt76_set(dev, MT_BBP(RXO, 13), BIT(10)); |
| |
| if (!dev->cal.init_cal_done) { |
| u8 val = mt76x2_eeprom_get(dev, MT_EE_BT_RCAL_RESULT); |
| |
| if (val != 0xff) |
| mt76x2u_mcu_calibrate(dev, MCU_CAL_R, 0); |
| } |
| |
| mt76x2u_mcu_calibrate(dev, MCU_CAL_RXDCOC, channel); |
| |
| /* Rx LPF calibration */ |
| if (!dev->cal.init_cal_done) |
| mt76x2u_mcu_calibrate(dev, MCU_CAL_RC, 0); |
| dev->cal.init_cal_done = true; |
| |
| mt76_wr(dev, MT_BBP(AGC, 61), 0xff64a4e2); |
| mt76_wr(dev, MT_BBP(AGC, 7), 0x08081010); |
| mt76_wr(dev, MT_BBP(AGC, 11), 0x00000404); |
| mt76_wr(dev, MT_BBP(AGC, 2), 0x00007070); |
| mt76_wr(dev, MT_TXOP_CTRL_CFG, 0X04101b3f); |
| |
| mt76_set(dev, MT_BBP(TXO, 4), BIT(25)); |
| mt76_set(dev, MT_BBP(RXO, 13), BIT(8)); |
| |
| if (scan) |
| return 0; |
| |
| if (mt76x2_tssi_enabled(dev)) { |
| /* init default values for temp compensation */ |
| mt76_rmw_field(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP, |
| 0x38); |
| mt76_rmw_field(dev, MT_TX_ALC_CFG_2, MT_TX_ALC_CFG_2_TEMP_COMP, |
| 0x38); |
| |
| /* init tssi calibration */ |
| if (!mt76x2_channel_silent(dev)) { |
| struct ieee80211_channel *chan; |
| u32 flag = 0; |
| |
| chan = dev->mt76.chandef.chan; |
| if (chan->band == NL80211_BAND_5GHZ) |
| flag |= BIT(0); |
| if (mt76x2_ext_pa_enabled(dev, chan->band)) |
| flag |= BIT(8); |
| mt76x2u_mcu_calibrate(dev, MCU_CAL_TSSI, flag); |
| dev->cal.tssi_cal_done = true; |
| } |
| } |
| |
| ieee80211_queue_delayed_work(mt76_hw(dev), &dev->cal_work, |
| MT_CALIBRATE_INTERVAL); |
| return 0; |
| } |