| /* | |
| * Copyright (C) 2000-2002 Michael Cornwell <cornwell@acm.org> | |
| * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> | |
| * Copyright (C) 2001-2002 Klaus Smolin | |
| * IBM Storage Technology Division | |
| * Copyright (C) 2003-2004, 2007 Bartlomiej Zolnierkiewicz | |
| * | |
| * The big the bad and the ugly. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/string.h> | |
| #include <linux/kernel.h> | |
| #include <linux/timer.h> | |
| #include <linux/mm.h> | |
| #include <linux/sched.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/major.h> | |
| #include <linux/errno.h> | |
| #include <linux/genhd.h> | |
| #include <linux/blkpg.h> | |
| #include <linux/slab.h> | |
| #include <linux/pci.h> | |
| #include <linux/delay.h> | |
| #include <linux/hdreg.h> | |
| #include <linux/ide.h> | |
| #include <linux/bitops.h> | |
| #include <linux/scatterlist.h> | |
| #include <asm/byteorder.h> | |
| #include <asm/irq.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/io.h> | |
| void ide_tf_dump(const char *s, struct ide_taskfile *tf) | |
| { | |
| #ifdef DEBUG | |
| printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x " | |
| "lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n", | |
| s, tf->feature, tf->nsect, tf->lbal, | |
| tf->lbam, tf->lbah, tf->device, tf->command); | |
| printk("%s: hob: nsect 0x%02x lbal 0x%02x " | |
| "lbam 0x%02x lbah 0x%02x\n", | |
| s, tf->hob_nsect, tf->hob_lbal, | |
| tf->hob_lbam, tf->hob_lbah); | |
| #endif | |
| } | |
| int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) | |
| { | |
| ide_task_t args; | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| args.tf.nsect = 0x01; | |
| if (drive->media == ide_disk) | |
| args.tf.command = WIN_IDENTIFY; | |
| else | |
| args.tf.command = WIN_PIDENTIFY; | |
| args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; | |
| args.data_phase = TASKFILE_IN; | |
| return ide_raw_taskfile(drive, &args, buf, 1); | |
| } | |
| static int inline task_dma_ok(ide_task_t *task) | |
| { | |
| if (blk_fs_request(task->rq) || (task->tf_flags & IDE_TFLAG_FLAGGED)) | |
| return 1; | |
| switch (task->tf.command) { | |
| case WIN_WRITEDMA_ONCE: | |
| case WIN_WRITEDMA: | |
| case WIN_WRITEDMA_EXT: | |
| case WIN_READDMA_ONCE: | |
| case WIN_READDMA: | |
| case WIN_READDMA_EXT: | |
| case WIN_IDENTIFY_DMA: | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static ide_startstop_t task_no_data_intr(ide_drive_t *); | |
| static ide_startstop_t set_geometry_intr(ide_drive_t *); | |
| static ide_startstop_t recal_intr(ide_drive_t *); | |
| static ide_startstop_t set_multmode_intr(ide_drive_t *); | |
| static ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *); | |
| static ide_startstop_t task_in_intr(ide_drive_t *); | |
| ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) | |
| { | |
| ide_hwif_t *hwif = HWIF(drive); | |
| struct ide_taskfile *tf = &task->tf; | |
| ide_handler_t *handler = NULL; | |
| const struct ide_dma_ops *dma_ops = hwif->dma_ops; | |
| if (task->data_phase == TASKFILE_MULTI_IN || | |
| task->data_phase == TASKFILE_MULTI_OUT) { | |
| if (!drive->mult_count) { | |
| printk(KERN_ERR "%s: multimode not set!\n", | |
| drive->name); | |
| return ide_stopped; | |
| } | |
| } | |
| if (task->tf_flags & IDE_TFLAG_FLAGGED) | |
| task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS; | |
| if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) { | |
| ide_tf_dump(drive->name, tf); | |
| hwif->tf_load(drive, task); | |
| } | |
| switch (task->data_phase) { | |
| case TASKFILE_MULTI_OUT: | |
| case TASKFILE_OUT: | |
| hwif->OUTBSYNC(drive, tf->command, hwif->io_ports.command_addr); | |
| ndelay(400); /* FIXME */ | |
| return pre_task_out_intr(drive, task->rq); | |
| case TASKFILE_MULTI_IN: | |
| case TASKFILE_IN: | |
| handler = task_in_intr; | |
| /* fall-through */ | |
| case TASKFILE_NO_DATA: | |
| if (handler == NULL) | |
| handler = task_no_data_intr; | |
| /* WIN_{SPECIFY,RESTORE,SETMULT} use custom handlers */ | |
| if (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) { | |
| switch (tf->command) { | |
| case WIN_SPECIFY: handler = set_geometry_intr; break; | |
| case WIN_RESTORE: handler = recal_intr; break; | |
| case WIN_SETMULT: handler = set_multmode_intr; break; | |
| } | |
| } | |
| ide_execute_command(drive, tf->command, handler, | |
| WAIT_WORSTCASE, NULL); | |
| return ide_started; | |
| default: | |
| if (task_dma_ok(task) == 0 || drive->using_dma == 0 || | |
| dma_ops->dma_setup(drive)) | |
| return ide_stopped; | |
| dma_ops->dma_exec_cmd(drive, tf->command); | |
| dma_ops->dma_start(drive); | |
| return ide_started; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(do_rw_taskfile); | |
| /* | |
| * set_multmode_intr() is invoked on completion of a WIN_SETMULT cmd. | |
| */ | |
| static ide_startstop_t set_multmode_intr(ide_drive_t *drive) | |
| { | |
| u8 stat = ide_read_status(drive); | |
| if (OK_STAT(stat, READY_STAT, BAD_STAT)) | |
| drive->mult_count = drive->mult_req; | |
| else { | |
| drive->mult_req = drive->mult_count = 0; | |
| drive->special.b.recalibrate = 1; | |
| (void) ide_dump_status(drive, "set_multmode", stat); | |
| } | |
| return ide_stopped; | |
| } | |
| /* | |
| * set_geometry_intr() is invoked on completion of a WIN_SPECIFY cmd. | |
| */ | |
| static ide_startstop_t set_geometry_intr(ide_drive_t *drive) | |
| { | |
| int retries = 5; | |
| u8 stat; | |
| while (((stat = ide_read_status(drive)) & BUSY_STAT) && retries--) | |
| udelay(10); | |
| if (OK_STAT(stat, READY_STAT, BAD_STAT)) | |
| return ide_stopped; | |
| if (stat & (ERR_STAT|DRQ_STAT)) | |
| return ide_error(drive, "set_geometry_intr", stat); | |
| BUG_ON(HWGROUP(drive)->handler != NULL); | |
| ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL); | |
| return ide_started; | |
| } | |
| /* | |
| * recal_intr() is invoked on completion of a WIN_RESTORE (recalibrate) cmd. | |
| */ | |
| static ide_startstop_t recal_intr(ide_drive_t *drive) | |
| { | |
| u8 stat = ide_read_status(drive); | |
| if (!OK_STAT(stat, READY_STAT, BAD_STAT)) | |
| return ide_error(drive, "recal_intr", stat); | |
| return ide_stopped; | |
| } | |
| /* | |
| * Handler for commands without a data phase | |
| */ | |
| static ide_startstop_t task_no_data_intr(ide_drive_t *drive) | |
| { | |
| ide_task_t *args = HWGROUP(drive)->rq->special; | |
| u8 stat; | |
| local_irq_enable_in_hardirq(); | |
| stat = ide_read_status(drive); | |
| if (!OK_STAT(stat, READY_STAT, BAD_STAT)) | |
| return ide_error(drive, "task_no_data_intr", stat); | |
| /* calls ide_end_drive_cmd */ | |
| if (args) | |
| ide_end_drive_cmd(drive, stat, ide_read_error(drive)); | |
| return ide_stopped; | |
| } | |
| static u8 wait_drive_not_busy(ide_drive_t *drive) | |
| { | |
| int retries; | |
| u8 stat; | |
| /* | |
| * Last sector was transfered, wait until drive is ready. | |
| * This can take up to 10 usec, but we will wait max 1 ms. | |
| */ | |
| for (retries = 0; retries < 100; retries++) { | |
| stat = ide_read_status(drive); | |
| if (stat & BUSY_STAT) | |
| udelay(10); | |
| else | |
| break; | |
| } | |
| if (stat & BUSY_STAT) | |
| printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); | |
| return stat; | |
| } | |
| static void ide_pio_sector(ide_drive_t *drive, struct request *rq, | |
| unsigned int write) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| struct scatterlist *sg = hwif->sg_table; | |
| struct scatterlist *cursg = hwif->cursg; | |
| struct page *page; | |
| #ifdef CONFIG_HIGHMEM | |
| unsigned long flags; | |
| #endif | |
| unsigned int offset; | |
| u8 *buf; | |
| cursg = hwif->cursg; | |
| if (!cursg) { | |
| cursg = sg; | |
| hwif->cursg = sg; | |
| } | |
| page = sg_page(cursg); | |
| offset = cursg->offset + hwif->cursg_ofs * SECTOR_SIZE; | |
| /* get the current page and offset */ | |
| page = nth_page(page, (offset >> PAGE_SHIFT)); | |
| offset %= PAGE_SIZE; | |
| #ifdef CONFIG_HIGHMEM | |
| local_irq_save(flags); | |
| #endif | |
| buf = kmap_atomic(page, KM_BIO_SRC_IRQ) + offset; | |
| hwif->nleft--; | |
| hwif->cursg_ofs++; | |
| if ((hwif->cursg_ofs * SECTOR_SIZE) == cursg->length) { | |
| hwif->cursg = sg_next(hwif->cursg); | |
| hwif->cursg_ofs = 0; | |
| } | |
| /* do the actual data transfer */ | |
| if (write) | |
| hwif->output_data(drive, rq, buf, SECTOR_SIZE); | |
| else | |
| hwif->input_data(drive, rq, buf, SECTOR_SIZE); | |
| kunmap_atomic(buf, KM_BIO_SRC_IRQ); | |
| #ifdef CONFIG_HIGHMEM | |
| local_irq_restore(flags); | |
| #endif | |
| } | |
| static void ide_pio_multi(ide_drive_t *drive, struct request *rq, | |
| unsigned int write) | |
| { | |
| unsigned int nsect; | |
| nsect = min_t(unsigned int, drive->hwif->nleft, drive->mult_count); | |
| while (nsect--) | |
| ide_pio_sector(drive, rq, write); | |
| } | |
| static void ide_pio_datablock(ide_drive_t *drive, struct request *rq, | |
| unsigned int write) | |
| { | |
| u8 saved_io_32bit = drive->io_32bit; | |
| if (rq->bio) /* fs request */ | |
| rq->errors = 0; | |
| if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { | |
| ide_task_t *task = rq->special; | |
| if (task->tf_flags & IDE_TFLAG_IO_16BIT) | |
| drive->io_32bit = 0; | |
| } | |
| touch_softlockup_watchdog(); | |
| switch (drive->hwif->data_phase) { | |
| case TASKFILE_MULTI_IN: | |
| case TASKFILE_MULTI_OUT: | |
| ide_pio_multi(drive, rq, write); | |
| break; | |
| default: | |
| ide_pio_sector(drive, rq, write); | |
| break; | |
| } | |
| drive->io_32bit = saved_io_32bit; | |
| } | |
| static ide_startstop_t task_error(ide_drive_t *drive, struct request *rq, | |
| const char *s, u8 stat) | |
| { | |
| if (rq->bio) { | |
| ide_hwif_t *hwif = drive->hwif; | |
| int sectors = hwif->nsect - hwif->nleft; | |
| switch (hwif->data_phase) { | |
| case TASKFILE_IN: | |
| if (hwif->nleft) | |
| break; | |
| /* fall through */ | |
| case TASKFILE_OUT: | |
| sectors--; | |
| break; | |
| case TASKFILE_MULTI_IN: | |
| if (hwif->nleft) | |
| break; | |
| /* fall through */ | |
| case TASKFILE_MULTI_OUT: | |
| sectors -= drive->mult_count; | |
| default: | |
| break; | |
| } | |
| if (sectors > 0) { | |
| ide_driver_t *drv; | |
| drv = *(ide_driver_t **)rq->rq_disk->private_data; | |
| drv->end_request(drive, 1, sectors); | |
| } | |
| } | |
| return ide_error(drive, s, stat); | |
| } | |
| void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat) | |
| { | |
| if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { | |
| u8 err = ide_read_error(drive); | |
| ide_end_drive_cmd(drive, stat, err); | |
| return; | |
| } | |
| if (rq->rq_disk) { | |
| ide_driver_t *drv; | |
| drv = *(ide_driver_t **)rq->rq_disk->private_data;; | |
| drv->end_request(drive, 1, rq->nr_sectors); | |
| } else | |
| ide_end_request(drive, 1, rq->nr_sectors); | |
| } | |
| /* | |
| * We got an interrupt on a task_in case, but no errors and no DRQ. | |
| * | |
| * It might be a spurious irq (shared irq), but it might be a | |
| * command that had no output. | |
| */ | |
| static ide_startstop_t task_in_unexpected(ide_drive_t *drive, struct request *rq, u8 stat) | |
| { | |
| /* Command all done? */ | |
| if (OK_STAT(stat, READY_STAT, BUSY_STAT)) { | |
| task_end_request(drive, rq, stat); | |
| return ide_stopped; | |
| } | |
| /* Assume it was a spurious irq */ | |
| ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); | |
| return ide_started; | |
| } | |
| /* | |
| * Handler for command with PIO data-in phase (Read/Read Multiple). | |
| */ | |
| static ide_startstop_t task_in_intr(ide_drive_t *drive) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| struct request *rq = HWGROUP(drive)->rq; | |
| u8 stat = ide_read_status(drive); | |
| /* Error? */ | |
| if (stat & ERR_STAT) | |
| return task_error(drive, rq, __func__, stat); | |
| /* Didn't want any data? Odd. */ | |
| if (!(stat & DRQ_STAT)) | |
| return task_in_unexpected(drive, rq, stat); | |
| ide_pio_datablock(drive, rq, 0); | |
| /* Are we done? Check status and finish transfer. */ | |
| if (!hwif->nleft) { | |
| stat = wait_drive_not_busy(drive); | |
| if (!OK_STAT(stat, 0, BAD_STAT)) | |
| return task_error(drive, rq, __func__, stat); | |
| task_end_request(drive, rq, stat); | |
| return ide_stopped; | |
| } | |
| /* Still data left to transfer. */ | |
| ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); | |
| return ide_started; | |
| } | |
| /* | |
| * Handler for command with PIO data-out phase (Write/Write Multiple). | |
| */ | |
| static ide_startstop_t task_out_intr (ide_drive_t *drive) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| struct request *rq = HWGROUP(drive)->rq; | |
| u8 stat = ide_read_status(drive); | |
| if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) | |
| return task_error(drive, rq, __func__, stat); | |
| /* Deal with unexpected ATA data phase. */ | |
| if (((stat & DRQ_STAT) == 0) ^ !hwif->nleft) | |
| return task_error(drive, rq, __func__, stat); | |
| if (!hwif->nleft) { | |
| task_end_request(drive, rq, stat); | |
| return ide_stopped; | |
| } | |
| /* Still data left to transfer. */ | |
| ide_pio_datablock(drive, rq, 1); | |
| ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL); | |
| return ide_started; | |
| } | |
| static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq) | |
| { | |
| ide_startstop_t startstop; | |
| if (ide_wait_stat(&startstop, drive, DRQ_STAT, | |
| drive->bad_wstat, WAIT_DRQ)) { | |
| printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n", | |
| drive->name, | |
| drive->hwif->data_phase ? "MULT" : "", | |
| drive->addressing ? "_EXT" : ""); | |
| return startstop; | |
| } | |
| if (!drive->unmask) | |
| local_irq_disable(); | |
| ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL); | |
| ide_pio_datablock(drive, rq, 1); | |
| return ide_started; | |
| } | |
| int ide_raw_taskfile(ide_drive_t *drive, ide_task_t *task, u8 *buf, u16 nsect) | |
| { | |
| struct request rq; | |
| blk_rq_init(NULL, &rq); | |
| rq.cmd_type = REQ_TYPE_ATA_TASKFILE; | |
| rq.buffer = buf; | |
| /* | |
| * (ks) We transfer currently only whole sectors. | |
| * This is suffient for now. But, it would be great, | |
| * if we would find a solution to transfer any size. | |
| * To support special commands like READ LONG. | |
| */ | |
| rq.hard_nr_sectors = rq.nr_sectors = nsect; | |
| rq.hard_cur_sectors = rq.current_nr_sectors = nsect; | |
| if (task->tf_flags & IDE_TFLAG_WRITE) | |
| rq.cmd_flags |= REQ_RW; | |
| rq.special = task; | |
| task->rq = &rq; | |
| return ide_do_drive_cmd(drive, &rq, ide_wait); | |
| } | |
| EXPORT_SYMBOL(ide_raw_taskfile); | |
| int ide_no_data_taskfile(ide_drive_t *drive, ide_task_t *task) | |
| { | |
| task->data_phase = TASKFILE_NO_DATA; | |
| return ide_raw_taskfile(drive, task, NULL, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(ide_no_data_taskfile); | |
| #ifdef CONFIG_IDE_TASK_IOCTL | |
| int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) | |
| { | |
| ide_task_request_t *req_task; | |
| ide_task_t args; | |
| u8 *outbuf = NULL; | |
| u8 *inbuf = NULL; | |
| u8 *data_buf = NULL; | |
| int err = 0; | |
| int tasksize = sizeof(struct ide_task_request_s); | |
| unsigned int taskin = 0; | |
| unsigned int taskout = 0; | |
| u16 nsect = 0; | |
| char __user *buf = (char __user *)arg; | |
| // printk("IDE Taskfile ...\n"); | |
| req_task = kzalloc(tasksize, GFP_KERNEL); | |
| if (req_task == NULL) return -ENOMEM; | |
| if (copy_from_user(req_task, buf, tasksize)) { | |
| kfree(req_task); | |
| return -EFAULT; | |
| } | |
| taskout = req_task->out_size; | |
| taskin = req_task->in_size; | |
| if (taskin > 65536 || taskout > 65536) { | |
| err = -EINVAL; | |
| goto abort; | |
| } | |
| if (taskout) { | |
| int outtotal = tasksize; | |
| outbuf = kzalloc(taskout, GFP_KERNEL); | |
| if (outbuf == NULL) { | |
| err = -ENOMEM; | |
| goto abort; | |
| } | |
| if (copy_from_user(outbuf, buf + outtotal, taskout)) { | |
| err = -EFAULT; | |
| goto abort; | |
| } | |
| } | |
| if (taskin) { | |
| int intotal = tasksize + taskout; | |
| inbuf = kzalloc(taskin, GFP_KERNEL); | |
| if (inbuf == NULL) { | |
| err = -ENOMEM; | |
| goto abort; | |
| } | |
| if (copy_from_user(inbuf, buf + intotal, taskin)) { | |
| err = -EFAULT; | |
| goto abort; | |
| } | |
| } | |
| memset(&args, 0, sizeof(ide_task_t)); | |
| memcpy(&args.tf_array[0], req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2); | |
| memcpy(&args.tf_array[6], req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); | |
| args.data_phase = req_task->data_phase; | |
| args.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE | | |
| IDE_TFLAG_IN_TF; | |
| if (drive->addressing == 1) | |
| args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_IN_HOB); | |
| if (req_task->out_flags.all) { | |
| args.tf_flags |= IDE_TFLAG_FLAGGED; | |
| if (req_task->out_flags.b.data) | |
| args.tf_flags |= IDE_TFLAG_OUT_DATA; | |
| if (req_task->out_flags.b.nsector_hob) | |
| args.tf_flags |= IDE_TFLAG_OUT_HOB_NSECT; | |
| if (req_task->out_flags.b.sector_hob) | |
| args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAL; | |
| if (req_task->out_flags.b.lcyl_hob) | |
| args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAM; | |
| if (req_task->out_flags.b.hcyl_hob) | |
| args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAH; | |
| if (req_task->out_flags.b.error_feature) | |
| args.tf_flags |= IDE_TFLAG_OUT_FEATURE; | |
| if (req_task->out_flags.b.nsector) | |
| args.tf_flags |= IDE_TFLAG_OUT_NSECT; | |
| if (req_task->out_flags.b.sector) | |
| args.tf_flags |= IDE_TFLAG_OUT_LBAL; | |
| if (req_task->out_flags.b.lcyl) | |
| args.tf_flags |= IDE_TFLAG_OUT_LBAM; | |
| if (req_task->out_flags.b.hcyl) | |
| args.tf_flags |= IDE_TFLAG_OUT_LBAH; | |
| } else { | |
| args.tf_flags |= IDE_TFLAG_OUT_TF; | |
| if (args.tf_flags & IDE_TFLAG_LBA48) | |
| args.tf_flags |= IDE_TFLAG_OUT_HOB; | |
| } | |
| if (req_task->in_flags.b.data) | |
| args.tf_flags |= IDE_TFLAG_IN_DATA; | |
| switch(req_task->data_phase) { | |
| case TASKFILE_MULTI_OUT: | |
| if (!drive->mult_count) { | |
| /* (hs): give up if multcount is not set */ | |
| printk(KERN_ERR "%s: %s Multimode Write " \ | |
| "multcount is not set\n", | |
| drive->name, __func__); | |
| err = -EPERM; | |
| goto abort; | |
| } | |
| /* fall through */ | |
| case TASKFILE_OUT: | |
| /* fall through */ | |
| case TASKFILE_OUT_DMAQ: | |
| case TASKFILE_OUT_DMA: | |
| nsect = taskout / SECTOR_SIZE; | |
| data_buf = outbuf; | |
| break; | |
| case TASKFILE_MULTI_IN: | |
| if (!drive->mult_count) { | |
| /* (hs): give up if multcount is not set */ | |
| printk(KERN_ERR "%s: %s Multimode Read failure " \ | |
| "multcount is not set\n", | |
| drive->name, __func__); | |
| err = -EPERM; | |
| goto abort; | |
| } | |
| /* fall through */ | |
| case TASKFILE_IN: | |
| /* fall through */ | |
| case TASKFILE_IN_DMAQ: | |
| case TASKFILE_IN_DMA: | |
| nsect = taskin / SECTOR_SIZE; | |
| data_buf = inbuf; | |
| break; | |
| case TASKFILE_NO_DATA: | |
| break; | |
| default: | |
| err = -EFAULT; | |
| goto abort; | |
| } | |
| if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA) | |
| nsect = 0; | |
| else if (!nsect) { | |
| nsect = (args.tf.hob_nsect << 8) | args.tf.nsect; | |
| if (!nsect) { | |
| printk(KERN_ERR "%s: in/out command without data\n", | |
| drive->name); | |
| err = -EFAULT; | |
| goto abort; | |
| } | |
| } | |
| if (req_task->req_cmd == IDE_DRIVE_TASK_RAW_WRITE) | |
| args.tf_flags |= IDE_TFLAG_WRITE; | |
| err = ide_raw_taskfile(drive, &args, data_buf, nsect); | |
| memcpy(req_task->hob_ports, &args.tf_array[0], HDIO_DRIVE_HOB_HDR_SIZE - 2); | |
| memcpy(req_task->io_ports, &args.tf_array[6], HDIO_DRIVE_TASK_HDR_SIZE); | |
| if ((args.tf_flags & IDE_TFLAG_FLAGGED_SET_IN_FLAGS) && | |
| req_task->in_flags.all == 0) { | |
| req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; | |
| if (drive->addressing == 1) | |
| req_task->in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8); | |
| } | |
| if (copy_to_user(buf, req_task, tasksize)) { | |
| err = -EFAULT; | |
| goto abort; | |
| } | |
| if (taskout) { | |
| int outtotal = tasksize; | |
| if (copy_to_user(buf + outtotal, outbuf, taskout)) { | |
| err = -EFAULT; | |
| goto abort; | |
| } | |
| } | |
| if (taskin) { | |
| int intotal = tasksize + taskout; | |
| if (copy_to_user(buf + intotal, inbuf, taskin)) { | |
| err = -EFAULT; | |
| goto abort; | |
| } | |
| } | |
| abort: | |
| kfree(req_task); | |
| kfree(outbuf); | |
| kfree(inbuf); | |
| // printk("IDE Taskfile ioctl ended. rc = %i\n", err); | |
| return err; | |
| } | |
| #endif | |
| int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) | |
| { | |
| u8 *buf = NULL; | |
| int bufsize = 0, err = 0; | |
| u8 args[4], xfer_rate = 0; | |
| ide_task_t tfargs; | |
| struct ide_taskfile *tf = &tfargs.tf; | |
| struct hd_driveid *id = drive->id; | |
| if (NULL == (void *) arg) { | |
| struct request rq; | |
| ide_init_drive_cmd(&rq); | |
| rq.cmd_type = REQ_TYPE_ATA_TASKFILE; | |
| return ide_do_drive_cmd(drive, &rq, ide_wait); | |
| } | |
| if (copy_from_user(args, (void __user *)arg, 4)) | |
| return -EFAULT; | |
| memset(&tfargs, 0, sizeof(ide_task_t)); | |
| tf->feature = args[2]; | |
| if (args[0] == WIN_SMART) { | |
| tf->nsect = args[3]; | |
| tf->lbal = args[1]; | |
| tf->lbam = 0x4f; | |
| tf->lbah = 0xc2; | |
| tfargs.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_IN_NSECT; | |
| } else { | |
| tf->nsect = args[1]; | |
| tfargs.tf_flags = IDE_TFLAG_OUT_FEATURE | | |
| IDE_TFLAG_OUT_NSECT | IDE_TFLAG_IN_NSECT; | |
| } | |
| tf->command = args[0]; | |
| tfargs.data_phase = args[3] ? TASKFILE_IN : TASKFILE_NO_DATA; | |
| if (args[3]) { | |
| tfargs.tf_flags |= IDE_TFLAG_IO_16BIT; | |
| bufsize = SECTOR_WORDS * 4 * args[3]; | |
| buf = kzalloc(bufsize, GFP_KERNEL); | |
| if (buf == NULL) | |
| return -ENOMEM; | |
| } | |
| if (tf->command == WIN_SETFEATURES && | |
| tf->feature == SETFEATURES_XFER && | |
| tf->nsect >= XFER_SW_DMA_0 && | |
| (id->dma_ultra || id->dma_mword || id->dma_1word)) { | |
| xfer_rate = args[1]; | |
| if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) { | |
| printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot " | |
| "be set\n", drive->name); | |
| goto abort; | |
| } | |
| } | |
| err = ide_raw_taskfile(drive, &tfargs, buf, args[3]); | |
| args[0] = tf->status; | |
| args[1] = tf->error; | |
| args[2] = tf->nsect; | |
| if (!err && xfer_rate) { | |
| /* active-retuning-calls future */ | |
| ide_set_xfer_rate(drive, xfer_rate); | |
| ide_driveid_update(drive); | |
| } | |
| abort: | |
| if (copy_to_user((void __user *)arg, &args, 4)) | |
| err = -EFAULT; | |
| if (buf) { | |
| if (copy_to_user((void __user *)(arg + 4), buf, bufsize)) | |
| err = -EFAULT; | |
| kfree(buf); | |
| } | |
| return err; | |
| } | |
| int ide_task_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) | |
| { | |
| void __user *p = (void __user *)arg; | |
| int err = 0; | |
| u8 args[7]; | |
| ide_task_t task; | |
| if (copy_from_user(args, p, 7)) | |
| return -EFAULT; | |
| memset(&task, 0, sizeof(task)); | |
| memcpy(&task.tf_array[7], &args[1], 6); | |
| task.tf.command = args[0]; | |
| task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; | |
| err = ide_no_data_taskfile(drive, &task); | |
| args[0] = task.tf.command; | |
| memcpy(&args[1], &task.tf_array[7], 6); | |
| if (copy_to_user(p, args, 7)) | |
| err = -EFAULT; | |
| return err; | |
| } |