| /* | |
| * Device probing and sysfs code. | |
| * | |
| * Copyright (C) 2005-2006 Kristian Hoegsberg <krh@bitplanet.net> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software Foundation, | |
| * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/wait.h> | |
| #include <linux/errno.h> | |
| #include <linux/kthread.h> | |
| #include <linux/device.h> | |
| #include <linux/delay.h> | |
| #include <linux/idr.h> | |
| #include <linux/string.h> | |
| #include <linux/rwsem.h> | |
| #include <linux/semaphore.h> | |
| #include <asm/system.h> | |
| #include <linux/ctype.h> | |
| #include "fw-transaction.h" | |
| #include "fw-topology.h" | |
| #include "fw-device.h" | |
| void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 * p) | |
| { | |
| ci->p = p + 1; | |
| ci->end = ci->p + (p[0] >> 16); | |
| } | |
| EXPORT_SYMBOL(fw_csr_iterator_init); | |
| int fw_csr_iterator_next(struct fw_csr_iterator *ci, int *key, int *value) | |
| { | |
| *key = *ci->p >> 24; | |
| *value = *ci->p & 0xffffff; | |
| return ci->p++ < ci->end; | |
| } | |
| EXPORT_SYMBOL(fw_csr_iterator_next); | |
| static int is_fw_unit(struct device *dev); | |
| static int match_unit_directory(u32 * directory, const struct fw_device_id *id) | |
| { | |
| struct fw_csr_iterator ci; | |
| int key, value, match; | |
| match = 0; | |
| fw_csr_iterator_init(&ci, directory); | |
| while (fw_csr_iterator_next(&ci, &key, &value)) { | |
| if (key == CSR_VENDOR && value == id->vendor) | |
| match |= FW_MATCH_VENDOR; | |
| if (key == CSR_MODEL && value == id->model) | |
| match |= FW_MATCH_MODEL; | |
| if (key == CSR_SPECIFIER_ID && value == id->specifier_id) | |
| match |= FW_MATCH_SPECIFIER_ID; | |
| if (key == CSR_VERSION && value == id->version) | |
| match |= FW_MATCH_VERSION; | |
| } | |
| return (match & id->match_flags) == id->match_flags; | |
| } | |
| static int fw_unit_match(struct device *dev, struct device_driver *drv) | |
| { | |
| struct fw_unit *unit = fw_unit(dev); | |
| struct fw_driver *driver = fw_driver(drv); | |
| int i; | |
| /* We only allow binding to fw_units. */ | |
| if (!is_fw_unit(dev)) | |
| return 0; | |
| for (i = 0; driver->id_table[i].match_flags != 0; i++) { | |
| if (match_unit_directory(unit->directory, &driver->id_table[i])) | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static int get_modalias(struct fw_unit *unit, char *buffer, size_t buffer_size) | |
| { | |
| struct fw_device *device = fw_device(unit->device.parent); | |
| struct fw_csr_iterator ci; | |
| int key, value; | |
| int vendor = 0; | |
| int model = 0; | |
| int specifier_id = 0; | |
| int version = 0; | |
| fw_csr_iterator_init(&ci, &device->config_rom[5]); | |
| while (fw_csr_iterator_next(&ci, &key, &value)) { | |
| switch (key) { | |
| case CSR_VENDOR: | |
| vendor = value; | |
| break; | |
| case CSR_MODEL: | |
| model = value; | |
| break; | |
| } | |
| } | |
| fw_csr_iterator_init(&ci, unit->directory); | |
| while (fw_csr_iterator_next(&ci, &key, &value)) { | |
| switch (key) { | |
| case CSR_SPECIFIER_ID: | |
| specifier_id = value; | |
| break; | |
| case CSR_VERSION: | |
| version = value; | |
| break; | |
| } | |
| } | |
| return snprintf(buffer, buffer_size, | |
| "ieee1394:ven%08Xmo%08Xsp%08Xver%08X", | |
| vendor, model, specifier_id, version); | |
| } | |
| static int | |
| fw_unit_uevent(struct device *dev, struct kobj_uevent_env *env) | |
| { | |
| struct fw_unit *unit = fw_unit(dev); | |
| char modalias[64]; | |
| get_modalias(unit, modalias, sizeof(modalias)); | |
| if (add_uevent_var(env, "MODALIAS=%s", modalias)) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| struct bus_type fw_bus_type = { | |
| .name = "firewire", | |
| .match = fw_unit_match, | |
| }; | |
| EXPORT_SYMBOL(fw_bus_type); | |
| static void fw_device_release(struct device *dev) | |
| { | |
| struct fw_device *device = fw_device(dev); | |
| struct fw_card *card = device->card; | |
| unsigned long flags; | |
| /* | |
| * Take the card lock so we don't set this to NULL while a | |
| * FW_NODE_UPDATED callback is being handled. | |
| */ | |
| spin_lock_irqsave(&card->lock, flags); | |
| device->node->data = NULL; | |
| spin_unlock_irqrestore(&card->lock, flags); | |
| fw_node_put(device->node); | |
| kfree(device->config_rom); | |
| kfree(device); | |
| atomic_dec(&card->device_count); | |
| } | |
| int fw_device_enable_phys_dma(struct fw_device *device) | |
| { | |
| int generation = device->generation; | |
| /* device->node_id, accessed below, must not be older than generation */ | |
| smp_rmb(); | |
| return device->card->driver->enable_phys_dma(device->card, | |
| device->node_id, | |
| generation); | |
| } | |
| EXPORT_SYMBOL(fw_device_enable_phys_dma); | |
| struct config_rom_attribute { | |
| struct device_attribute attr; | |
| u32 key; | |
| }; | |
| static ssize_t | |
| show_immediate(struct device *dev, struct device_attribute *dattr, char *buf) | |
| { | |
| struct config_rom_attribute *attr = | |
| container_of(dattr, struct config_rom_attribute, attr); | |
| struct fw_csr_iterator ci; | |
| u32 *dir; | |
| int key, value, ret = -ENOENT; | |
| down_read(&fw_device_rwsem); | |
| if (is_fw_unit(dev)) | |
| dir = fw_unit(dev)->directory; | |
| else | |
| dir = fw_device(dev)->config_rom + 5; | |
| fw_csr_iterator_init(&ci, dir); | |
| while (fw_csr_iterator_next(&ci, &key, &value)) | |
| if (attr->key == key) { | |
| ret = snprintf(buf, buf ? PAGE_SIZE : 0, | |
| "0x%06x\n", value); | |
| break; | |
| } | |
| up_read(&fw_device_rwsem); | |
| return ret; | |
| } | |
| #define IMMEDIATE_ATTR(name, key) \ | |
| { __ATTR(name, S_IRUGO, show_immediate, NULL), key } | |
| static ssize_t | |
| show_text_leaf(struct device *dev, struct device_attribute *dattr, char *buf) | |
| { | |
| struct config_rom_attribute *attr = | |
| container_of(dattr, struct config_rom_attribute, attr); | |
| struct fw_csr_iterator ci; | |
| u32 *dir, *block = NULL, *p, *end; | |
| int length, key, value, last_key = 0, ret = -ENOENT; | |
| char *b; | |
| down_read(&fw_device_rwsem); | |
| if (is_fw_unit(dev)) | |
| dir = fw_unit(dev)->directory; | |
| else | |
| dir = fw_device(dev)->config_rom + 5; | |
| fw_csr_iterator_init(&ci, dir); | |
| while (fw_csr_iterator_next(&ci, &key, &value)) { | |
| if (attr->key == last_key && | |
| key == (CSR_DESCRIPTOR | CSR_LEAF)) | |
| block = ci.p - 1 + value; | |
| last_key = key; | |
| } | |
| if (block == NULL) | |
| goto out; | |
| length = min(block[0] >> 16, 256U); | |
| if (length < 3) | |
| goto out; | |
| if (block[1] != 0 || block[2] != 0) | |
| /* Unknown encoding. */ | |
| goto out; | |
| if (buf == NULL) { | |
| ret = length * 4; | |
| goto out; | |
| } | |
| b = buf; | |
| end = &block[length + 1]; | |
| for (p = &block[3]; p < end; p++, b += 4) | |
| * (u32 *) b = (__force u32) __cpu_to_be32(*p); | |
| /* Strip trailing whitespace and add newline. */ | |
| while (b--, (isspace(*b) || *b == '\0') && b > buf); | |
| strcpy(b + 1, "\n"); | |
| ret = b + 2 - buf; | |
| out: | |
| up_read(&fw_device_rwsem); | |
| return ret; | |
| } | |
| #define TEXT_LEAF_ATTR(name, key) \ | |
| { __ATTR(name, S_IRUGO, show_text_leaf, NULL), key } | |
| static struct config_rom_attribute config_rom_attributes[] = { | |
| IMMEDIATE_ATTR(vendor, CSR_VENDOR), | |
| IMMEDIATE_ATTR(hardware_version, CSR_HARDWARE_VERSION), | |
| IMMEDIATE_ATTR(specifier_id, CSR_SPECIFIER_ID), | |
| IMMEDIATE_ATTR(version, CSR_VERSION), | |
| IMMEDIATE_ATTR(model, CSR_MODEL), | |
| TEXT_LEAF_ATTR(vendor_name, CSR_VENDOR), | |
| TEXT_LEAF_ATTR(model_name, CSR_MODEL), | |
| TEXT_LEAF_ATTR(hardware_version_name, CSR_HARDWARE_VERSION), | |
| }; | |
| static void | |
| init_fw_attribute_group(struct device *dev, | |
| struct device_attribute *attrs, | |
| struct fw_attribute_group *group) | |
| { | |
| struct device_attribute *attr; | |
| int i, j; | |
| for (j = 0; attrs[j].attr.name != NULL; j++) | |
| group->attrs[j] = &attrs[j].attr; | |
| for (i = 0; i < ARRAY_SIZE(config_rom_attributes); i++) { | |
| attr = &config_rom_attributes[i].attr; | |
| if (attr->show(dev, attr, NULL) < 0) | |
| continue; | |
| group->attrs[j++] = &attr->attr; | |
| } | |
| BUG_ON(j >= ARRAY_SIZE(group->attrs)); | |
| group->attrs[j++] = NULL; | |
| group->groups[0] = &group->group; | |
| group->groups[1] = NULL; | |
| group->group.attrs = group->attrs; | |
| dev->groups = group->groups; | |
| } | |
| static ssize_t | |
| modalias_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct fw_unit *unit = fw_unit(dev); | |
| int length; | |
| length = get_modalias(unit, buf, PAGE_SIZE); | |
| strcpy(buf + length, "\n"); | |
| return length + 1; | |
| } | |
| static ssize_t | |
| rom_index_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct fw_device *device = fw_device(dev->parent); | |
| struct fw_unit *unit = fw_unit(dev); | |
| return snprintf(buf, PAGE_SIZE, "%d\n", | |
| (int)(unit->directory - device->config_rom)); | |
| } | |
| static struct device_attribute fw_unit_attributes[] = { | |
| __ATTR_RO(modalias), | |
| __ATTR_RO(rom_index), | |
| __ATTR_NULL, | |
| }; | |
| static ssize_t | |
| config_rom_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct fw_device *device = fw_device(dev); | |
| size_t length; | |
| down_read(&fw_device_rwsem); | |
| length = device->config_rom_length * 4; | |
| memcpy(buf, device->config_rom, length); | |
| up_read(&fw_device_rwsem); | |
| return length; | |
| } | |
| static ssize_t | |
| guid_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct fw_device *device = fw_device(dev); | |
| int ret; | |
| down_read(&fw_device_rwsem); | |
| ret = snprintf(buf, PAGE_SIZE, "0x%08x%08x\n", | |
| device->config_rom[3], device->config_rom[4]); | |
| up_read(&fw_device_rwsem); | |
| return ret; | |
| } | |
| static struct device_attribute fw_device_attributes[] = { | |
| __ATTR_RO(config_rom), | |
| __ATTR_RO(guid), | |
| __ATTR_NULL, | |
| }; | |
| struct read_quadlet_callback_data { | |
| struct completion done; | |
| int rcode; | |
| u32 data; | |
| }; | |
| static void | |
| complete_transaction(struct fw_card *card, int rcode, | |
| void *payload, size_t length, void *data) | |
| { | |
| struct read_quadlet_callback_data *callback_data = data; | |
| if (rcode == RCODE_COMPLETE) | |
| callback_data->data = be32_to_cpu(*(__be32 *)payload); | |
| callback_data->rcode = rcode; | |
| complete(&callback_data->done); | |
| } | |
| static int | |
| read_rom(struct fw_device *device, int generation, int index, u32 *data) | |
| { | |
| struct read_quadlet_callback_data callback_data; | |
| struct fw_transaction t; | |
| u64 offset; | |
| /* device->node_id, accessed below, must not be older than generation */ | |
| smp_rmb(); | |
| init_completion(&callback_data.done); | |
| offset = (CSR_REGISTER_BASE | CSR_CONFIG_ROM) + index * 4; | |
| fw_send_request(device->card, &t, TCODE_READ_QUADLET_REQUEST, | |
| device->node_id, generation, device->max_speed, | |
| offset, NULL, 4, complete_transaction, &callback_data); | |
| wait_for_completion(&callback_data.done); | |
| *data = callback_data.data; | |
| return callback_data.rcode; | |
| } | |
| #define READ_BIB_ROM_SIZE 256 | |
| #define READ_BIB_STACK_SIZE 16 | |
| /* | |
| * Read the bus info block, perform a speed probe, and read all of the rest of | |
| * the config ROM. We do all this with a cached bus generation. If the bus | |
| * generation changes under us, read_bus_info_block will fail and get retried. | |
| * It's better to start all over in this case because the node from which we | |
| * are reading the ROM may have changed the ROM during the reset. | |
| */ | |
| static int read_bus_info_block(struct fw_device *device, int generation) | |
| { | |
| u32 *rom, *stack, *old_rom, *new_rom; | |
| u32 sp, key; | |
| int i, end, length, ret = -1; | |
| rom = kmalloc(sizeof(*rom) * READ_BIB_ROM_SIZE + | |
| sizeof(*stack) * READ_BIB_STACK_SIZE, GFP_KERNEL); | |
| if (rom == NULL) | |
| return -ENOMEM; | |
| stack = &rom[READ_BIB_ROM_SIZE]; | |
| device->max_speed = SCODE_100; | |
| /* First read the bus info block. */ | |
| for (i = 0; i < 5; i++) { | |
| if (read_rom(device, generation, i, &rom[i]) != RCODE_COMPLETE) | |
| goto out; | |
| /* | |
| * As per IEEE1212 7.2, during power-up, devices can | |
| * reply with a 0 for the first quadlet of the config | |
| * rom to indicate that they are booting (for example, | |
| * if the firmware is on the disk of a external | |
| * harddisk). In that case we just fail, and the | |
| * retry mechanism will try again later. | |
| */ | |
| if (i == 0 && rom[i] == 0) | |
| goto out; | |
| } | |
| device->max_speed = device->node->max_speed; | |
| /* | |
| * Determine the speed of | |
| * - devices with link speed less than PHY speed, | |
| * - devices with 1394b PHY (unless only connected to 1394a PHYs), | |
| * - all devices if there are 1394b repeaters. | |
| * Note, we cannot use the bus info block's link_spd as starting point | |
| * because some buggy firmwares set it lower than necessary and because | |
| * 1394-1995 nodes do not have the field. | |
| */ | |
| if ((rom[2] & 0x7) < device->max_speed || | |
| device->max_speed == SCODE_BETA || | |
| device->card->beta_repeaters_present) { | |
| u32 dummy; | |
| /* for S1600 and S3200 */ | |
| if (device->max_speed == SCODE_BETA) | |
| device->max_speed = device->card->link_speed; | |
| while (device->max_speed > SCODE_100) { | |
| if (read_rom(device, generation, 0, &dummy) == | |
| RCODE_COMPLETE) | |
| break; | |
| device->max_speed--; | |
| } | |
| } | |
| /* | |
| * Now parse the config rom. The config rom is a recursive | |
| * directory structure so we parse it using a stack of | |
| * references to the blocks that make up the structure. We | |
| * push a reference to the root directory on the stack to | |
| * start things off. | |
| */ | |
| length = i; | |
| sp = 0; | |
| stack[sp++] = 0xc0000005; | |
| while (sp > 0) { | |
| /* | |
| * Pop the next block reference of the stack. The | |
| * lower 24 bits is the offset into the config rom, | |
| * the upper 8 bits are the type of the reference the | |
| * block. | |
| */ | |
| key = stack[--sp]; | |
| i = key & 0xffffff; | |
| if (i >= READ_BIB_ROM_SIZE) | |
| /* | |
| * The reference points outside the standard | |
| * config rom area, something's fishy. | |
| */ | |
| goto out; | |
| /* Read header quadlet for the block to get the length. */ | |
| if (read_rom(device, generation, i, &rom[i]) != RCODE_COMPLETE) | |
| goto out; | |
| end = i + (rom[i] >> 16) + 1; | |
| i++; | |
| if (end > READ_BIB_ROM_SIZE) | |
| /* | |
| * This block extends outside standard config | |
| * area (and the array we're reading it | |
| * into). That's broken, so ignore this | |
| * device. | |
| */ | |
| goto out; | |
| /* | |
| * Now read in the block. If this is a directory | |
| * block, check the entries as we read them to see if | |
| * it references another block, and push it in that case. | |
| */ | |
| while (i < end) { | |
| if (read_rom(device, generation, i, &rom[i]) != | |
| RCODE_COMPLETE) | |
| goto out; | |
| if ((key >> 30) == 3 && (rom[i] >> 30) > 1 && | |
| sp < READ_BIB_STACK_SIZE) | |
| stack[sp++] = i + rom[i]; | |
| i++; | |
| } | |
| if (length < i) | |
| length = i; | |
| } | |
| old_rom = device->config_rom; | |
| new_rom = kmemdup(rom, length * 4, GFP_KERNEL); | |
| if (new_rom == NULL) | |
| goto out; | |
| down_write(&fw_device_rwsem); | |
| device->config_rom = new_rom; | |
| device->config_rom_length = length; | |
| up_write(&fw_device_rwsem); | |
| kfree(old_rom); | |
| ret = 0; | |
| device->cmc = rom[2] & 1 << 30; | |
| out: | |
| kfree(rom); | |
| return ret; | |
| } | |
| static void fw_unit_release(struct device *dev) | |
| { | |
| struct fw_unit *unit = fw_unit(dev); | |
| kfree(unit); | |
| } | |
| static struct device_type fw_unit_type = { | |
| .uevent = fw_unit_uevent, | |
| .release = fw_unit_release, | |
| }; | |
| static int is_fw_unit(struct device *dev) | |
| { | |
| return dev->type == &fw_unit_type; | |
| } | |
| static void create_units(struct fw_device *device) | |
| { | |
| struct fw_csr_iterator ci; | |
| struct fw_unit *unit; | |
| int key, value, i; | |
| i = 0; | |
| fw_csr_iterator_init(&ci, &device->config_rom[5]); | |
| while (fw_csr_iterator_next(&ci, &key, &value)) { | |
| if (key != (CSR_UNIT | CSR_DIRECTORY)) | |
| continue; | |
| /* | |
| * Get the address of the unit directory and try to | |
| * match the drivers id_tables against it. | |
| */ | |
| unit = kzalloc(sizeof(*unit), GFP_KERNEL); | |
| if (unit == NULL) { | |
| fw_error("failed to allocate memory for unit\n"); | |
| continue; | |
| } | |
| unit->directory = ci.p + value - 1; | |
| unit->device.bus = &fw_bus_type; | |
| unit->device.type = &fw_unit_type; | |
| unit->device.parent = &device->device; | |
| snprintf(unit->device.bus_id, sizeof(unit->device.bus_id), | |
| "%s.%d", device->device.bus_id, i++); | |
| init_fw_attribute_group(&unit->device, | |
| fw_unit_attributes, | |
| &unit->attribute_group); | |
| if (device_register(&unit->device) < 0) | |
| goto skip_unit; | |
| continue; | |
| skip_unit: | |
| kfree(unit); | |
| } | |
| } | |
| static int shutdown_unit(struct device *device, void *data) | |
| { | |
| device_unregister(device); | |
| return 0; | |
| } | |
| /* | |
| * fw_device_rwsem acts as dual purpose mutex: | |
| * - serializes accesses to fw_device_idr, | |
| * - serializes accesses to fw_device.config_rom/.config_rom_length and | |
| * fw_unit.directory, unless those accesses happen at safe occasions | |
| */ | |
| DECLARE_RWSEM(fw_device_rwsem); | |
| static DEFINE_IDR(fw_device_idr); | |
| int fw_cdev_major; | |
| struct fw_device *fw_device_get_by_devt(dev_t devt) | |
| { | |
| struct fw_device *device; | |
| down_read(&fw_device_rwsem); | |
| device = idr_find(&fw_device_idr, MINOR(devt)); | |
| if (device) | |
| fw_device_get(device); | |
| up_read(&fw_device_rwsem); | |
| return device; | |
| } | |
| static void fw_device_shutdown(struct work_struct *work) | |
| { | |
| struct fw_device *device = | |
| container_of(work, struct fw_device, work.work); | |
| int minor = MINOR(device->device.devt); | |
| fw_device_cdev_remove(device); | |
| device_for_each_child(&device->device, NULL, shutdown_unit); | |
| device_unregister(&device->device); | |
| down_write(&fw_device_rwsem); | |
| idr_remove(&fw_device_idr, minor); | |
| up_write(&fw_device_rwsem); | |
| fw_device_put(device); | |
| } | |
| static struct device_type fw_device_type = { | |
| .release = fw_device_release, | |
| }; | |
| /* | |
| * These defines control the retry behavior for reading the config | |
| * rom. It shouldn't be necessary to tweak these; if the device | |
| * doesn't respond to a config rom read within 10 seconds, it's not | |
| * going to respond at all. As for the initial delay, a lot of | |
| * devices will be able to respond within half a second after bus | |
| * reset. On the other hand, it's not really worth being more | |
| * aggressive than that, since it scales pretty well; if 10 devices | |
| * are plugged in, they're all getting read within one second. | |
| */ | |
| #define MAX_RETRIES 10 | |
| #define RETRY_DELAY (3 * HZ) | |
| #define INITIAL_DELAY (HZ / 2) | |
| static void fw_device_init(struct work_struct *work) | |
| { | |
| struct fw_device *device = | |
| container_of(work, struct fw_device, work.work); | |
| int minor, err; | |
| /* | |
| * All failure paths here set node->data to NULL, so that we | |
| * don't try to do device_for_each_child() on a kfree()'d | |
| * device. | |
| */ | |
| if (read_bus_info_block(device, device->generation) < 0) { | |
| if (device->config_rom_retries < MAX_RETRIES && | |
| atomic_read(&device->state) == FW_DEVICE_INITIALIZING) { | |
| device->config_rom_retries++; | |
| schedule_delayed_work(&device->work, RETRY_DELAY); | |
| } else { | |
| fw_notify("giving up on config rom for node id %x\n", | |
| device->node_id); | |
| if (device->node == device->card->root_node) | |
| schedule_delayed_work(&device->card->work, 0); | |
| fw_device_release(&device->device); | |
| } | |
| return; | |
| } | |
| err = -ENOMEM; | |
| fw_device_get(device); | |
| down_write(&fw_device_rwsem); | |
| if (idr_pre_get(&fw_device_idr, GFP_KERNEL)) | |
| err = idr_get_new(&fw_device_idr, device, &minor); | |
| up_write(&fw_device_rwsem); | |
| if (err < 0) | |
| goto error; | |
| device->device.bus = &fw_bus_type; | |
| device->device.type = &fw_device_type; | |
| device->device.parent = device->card->device; | |
| device->device.devt = MKDEV(fw_cdev_major, minor); | |
| snprintf(device->device.bus_id, sizeof(device->device.bus_id), | |
| "fw%d", minor); | |
| init_fw_attribute_group(&device->device, | |
| fw_device_attributes, | |
| &device->attribute_group); | |
| if (device_add(&device->device)) { | |
| fw_error("Failed to add device.\n"); | |
| goto error_with_cdev; | |
| } | |
| create_units(device); | |
| /* | |
| * Transition the device to running state. If it got pulled | |
| * out from under us while we did the intialization work, we | |
| * have to shut down the device again here. Normally, though, | |
| * fw_node_event will be responsible for shutting it down when | |
| * necessary. We have to use the atomic cmpxchg here to avoid | |
| * racing with the FW_NODE_DESTROYED case in | |
| * fw_node_event(). | |
| */ | |
| if (atomic_cmpxchg(&device->state, | |
| FW_DEVICE_INITIALIZING, | |
| FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) { | |
| fw_device_shutdown(work); | |
| } else { | |
| if (device->config_rom_retries) | |
| fw_notify("created device %s: GUID %08x%08x, S%d00, " | |
| "%d config ROM retries\n", | |
| device->device.bus_id, | |
| device->config_rom[3], device->config_rom[4], | |
| 1 << device->max_speed, | |
| device->config_rom_retries); | |
| else | |
| fw_notify("created device %s: GUID %08x%08x, S%d00\n", | |
| device->device.bus_id, | |
| device->config_rom[3], device->config_rom[4], | |
| 1 << device->max_speed); | |
| device->config_rom_retries = 0; | |
| } | |
| /* | |
| * Reschedule the IRM work if we just finished reading the | |
| * root node config rom. If this races with a bus reset we | |
| * just end up running the IRM work a couple of extra times - | |
| * pretty harmless. | |
| */ | |
| if (device->node == device->card->root_node) | |
| schedule_delayed_work(&device->card->work, 0); | |
| return; | |
| error_with_cdev: | |
| down_write(&fw_device_rwsem); | |
| idr_remove(&fw_device_idr, minor); | |
| up_write(&fw_device_rwsem); | |
| error: | |
| fw_device_put(device); /* fw_device_idr's reference */ | |
| put_device(&device->device); /* our reference */ | |
| } | |
| static int update_unit(struct device *dev, void *data) | |
| { | |
| struct fw_unit *unit = fw_unit(dev); | |
| struct fw_driver *driver = (struct fw_driver *)dev->driver; | |
| if (is_fw_unit(dev) && driver != NULL && driver->update != NULL) { | |
| down(&dev->sem); | |
| driver->update(unit); | |
| up(&dev->sem); | |
| } | |
| return 0; | |
| } | |
| static void fw_device_update(struct work_struct *work) | |
| { | |
| struct fw_device *device = | |
| container_of(work, struct fw_device, work.work); | |
| fw_device_cdev_update(device); | |
| device_for_each_child(&device->device, NULL, update_unit); | |
| } | |
| enum { | |
| REREAD_BIB_ERROR, | |
| REREAD_BIB_GONE, | |
| REREAD_BIB_UNCHANGED, | |
| REREAD_BIB_CHANGED, | |
| }; | |
| /* Reread and compare bus info block and header of root directory */ | |
| static int reread_bus_info_block(struct fw_device *device, int generation) | |
| { | |
| u32 q; | |
| int i; | |
| for (i = 0; i < 6; i++) { | |
| if (read_rom(device, generation, i, &q) != RCODE_COMPLETE) | |
| return REREAD_BIB_ERROR; | |
| if (i == 0 && q == 0) | |
| return REREAD_BIB_GONE; | |
| if (i > device->config_rom_length || q != device->config_rom[i]) | |
| return REREAD_BIB_CHANGED; | |
| } | |
| return REREAD_BIB_UNCHANGED; | |
| } | |
| static void fw_device_refresh(struct work_struct *work) | |
| { | |
| struct fw_device *device = | |
| container_of(work, struct fw_device, work.work); | |
| struct fw_card *card = device->card; | |
| int node_id = device->node_id; | |
| switch (reread_bus_info_block(device, device->generation)) { | |
| case REREAD_BIB_ERROR: | |
| if (device->config_rom_retries < MAX_RETRIES / 2 && | |
| atomic_read(&device->state) == FW_DEVICE_INITIALIZING) { | |
| device->config_rom_retries++; | |
| schedule_delayed_work(&device->work, RETRY_DELAY / 2); | |
| return; | |
| } | |
| goto give_up; | |
| case REREAD_BIB_GONE: | |
| goto gone; | |
| case REREAD_BIB_UNCHANGED: | |
| if (atomic_cmpxchg(&device->state, | |
| FW_DEVICE_INITIALIZING, | |
| FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) | |
| goto gone; | |
| fw_device_update(work); | |
| device->config_rom_retries = 0; | |
| goto out; | |
| case REREAD_BIB_CHANGED: | |
| break; | |
| } | |
| /* | |
| * Something changed. We keep things simple and don't investigate | |
| * further. We just destroy all previous units and create new ones. | |
| */ | |
| device_for_each_child(&device->device, NULL, shutdown_unit); | |
| if (read_bus_info_block(device, device->generation) < 0) { | |
| if (device->config_rom_retries < MAX_RETRIES && | |
| atomic_read(&device->state) == FW_DEVICE_INITIALIZING) { | |
| device->config_rom_retries++; | |
| schedule_delayed_work(&device->work, RETRY_DELAY); | |
| return; | |
| } | |
| goto give_up; | |
| } | |
| create_units(device); | |
| if (atomic_cmpxchg(&device->state, | |
| FW_DEVICE_INITIALIZING, | |
| FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) | |
| goto gone; | |
| fw_notify("refreshed device %s\n", device->device.bus_id); | |
| device->config_rom_retries = 0; | |
| goto out; | |
| give_up: | |
| fw_notify("giving up on refresh of device %s\n", device->device.bus_id); | |
| gone: | |
| atomic_set(&device->state, FW_DEVICE_SHUTDOWN); | |
| fw_device_shutdown(work); | |
| out: | |
| if (node_id == card->root_node->node_id) | |
| schedule_delayed_work(&card->work, 0); | |
| } | |
| void fw_node_event(struct fw_card *card, struct fw_node *node, int event) | |
| { | |
| struct fw_device *device; | |
| switch (event) { | |
| case FW_NODE_CREATED: | |
| case FW_NODE_LINK_ON: | |
| if (!node->link_on) | |
| break; | |
| create: | |
| device = kzalloc(sizeof(*device), GFP_ATOMIC); | |
| if (device == NULL) | |
| break; | |
| /* | |
| * Do minimal intialization of the device here, the | |
| * rest will happen in fw_device_init(). We need the | |
| * card and node so we can read the config rom and we | |
| * need to do device_initialize() now so | |
| * device_for_each_child() in FW_NODE_UPDATED is | |
| * doesn't freak out. | |
| */ | |
| device_initialize(&device->device); | |
| atomic_set(&device->state, FW_DEVICE_INITIALIZING); | |
| atomic_inc(&card->device_count); | |
| device->card = card; | |
| device->node = fw_node_get(node); | |
| device->node_id = node->node_id; | |
| device->generation = card->generation; | |
| INIT_LIST_HEAD(&device->client_list); | |
| /* | |
| * Set the node data to point back to this device so | |
| * FW_NODE_UPDATED callbacks can update the node_id | |
| * and generation for the device. | |
| */ | |
| node->data = device; | |
| /* | |
| * Many devices are slow to respond after bus resets, | |
| * especially if they are bus powered and go through | |
| * power-up after getting plugged in. We schedule the | |
| * first config rom scan half a second after bus reset. | |
| */ | |
| INIT_DELAYED_WORK(&device->work, fw_device_init); | |
| schedule_delayed_work(&device->work, INITIAL_DELAY); | |
| break; | |
| case FW_NODE_INITIATED_RESET: | |
| device = node->data; | |
| if (device == NULL) | |
| goto create; | |
| device->node_id = node->node_id; | |
| smp_wmb(); /* update node_id before generation */ | |
| device->generation = card->generation; | |
| if (atomic_cmpxchg(&device->state, | |
| FW_DEVICE_RUNNING, | |
| FW_DEVICE_INITIALIZING) == FW_DEVICE_RUNNING) { | |
| PREPARE_DELAYED_WORK(&device->work, fw_device_refresh); | |
| schedule_delayed_work(&device->work, | |
| node == card->local_node ? 0 : INITIAL_DELAY); | |
| } | |
| break; | |
| case FW_NODE_UPDATED: | |
| if (!node->link_on || node->data == NULL) | |
| break; | |
| device = node->data; | |
| device->node_id = node->node_id; | |
| smp_wmb(); /* update node_id before generation */ | |
| device->generation = card->generation; | |
| if (atomic_read(&device->state) == FW_DEVICE_RUNNING) { | |
| PREPARE_DELAYED_WORK(&device->work, fw_device_update); | |
| schedule_delayed_work(&device->work, 0); | |
| } | |
| break; | |
| case FW_NODE_DESTROYED: | |
| case FW_NODE_LINK_OFF: | |
| if (!node->data) | |
| break; | |
| /* | |
| * Destroy the device associated with the node. There | |
| * are two cases here: either the device is fully | |
| * initialized (FW_DEVICE_RUNNING) or we're in the | |
| * process of reading its config rom | |
| * (FW_DEVICE_INITIALIZING). If it is fully | |
| * initialized we can reuse device->work to schedule a | |
| * full fw_device_shutdown(). If not, there's work | |
| * scheduled to read it's config rom, and we just put | |
| * the device in shutdown state to have that code fail | |
| * to create the device. | |
| */ | |
| device = node->data; | |
| if (atomic_xchg(&device->state, | |
| FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) { | |
| PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); | |
| schedule_delayed_work(&device->work, 0); | |
| } | |
| break; | |
| } | |
| } |