| /* | 
 |  * MTX-1 platform devices registration | 
 |  * | 
 |  * Copyright (C) 2007-2009, Florian Fainelli <florian@openwrt.org> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/leds.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/gpio_keys.h> | 
 | #include <linux/input.h> | 
 | #include <linux/mtd/partitions.h> | 
 | #include <linux/mtd/physmap.h> | 
 | #include <mtd/mtd-abi.h> | 
 |  | 
 | static struct gpio_keys_button mtx1_gpio_button[] = { | 
 | 	{ | 
 | 		.gpio = 207, | 
 | 		.code = BTN_0, | 
 | 		.desc = "System button", | 
 | 	} | 
 | }; | 
 |  | 
 | static struct gpio_keys_platform_data mtx1_buttons_data = { | 
 | 	.buttons = mtx1_gpio_button, | 
 | 	.nbuttons = ARRAY_SIZE(mtx1_gpio_button), | 
 | }; | 
 |  | 
 | static struct platform_device mtx1_button = { | 
 | 	.name = "gpio-keys", | 
 | 	.id = -1, | 
 | 	.dev = { | 
 | 		.platform_data = &mtx1_buttons_data, | 
 | 	} | 
 | }; | 
 |  | 
 | static struct resource mtx1_wdt_res[] = { | 
 | 	[0] = { | 
 | 		.start	= 15, | 
 | 		.end	= 15, | 
 | 		.name	= "mtx1-wdt-gpio", | 
 | 		.flags	= IORESOURCE_IRQ, | 
 | 	} | 
 | }; | 
 |  | 
 | static struct platform_device mtx1_wdt = { | 
 | 	.name = "mtx1-wdt", | 
 | 	.id = 0, | 
 | 	.num_resources = ARRAY_SIZE(mtx1_wdt_res), | 
 | 	.resource = mtx1_wdt_res, | 
 | }; | 
 |  | 
 | static struct gpio_led default_leds[] = { | 
 | 	{ | 
 | 		.name	= "mtx1:green", | 
 | 		.gpio = 211, | 
 | 	}, { | 
 | 		.name = "mtx1:red", | 
 | 		.gpio = 212, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct gpio_led_platform_data mtx1_led_data = { | 
 | 	.num_leds = ARRAY_SIZE(default_leds), | 
 | 	.leds = default_leds, | 
 | }; | 
 |  | 
 | static struct platform_device mtx1_gpio_leds = { | 
 | 	.name = "leds-gpio", | 
 | 	.id = -1, | 
 | 	.dev = { | 
 | 		.platform_data = &mtx1_led_data, | 
 | 	} | 
 | }; | 
 |  | 
 | static struct mtd_partition mtx1_mtd_partitions[] = { | 
 | 	{ | 
 | 		.name	= "filesystem", | 
 | 		.size	= 0x01C00000, | 
 | 		.offset	= 0, | 
 | 	}, | 
 | 	{ | 
 | 		.name	= "yamon", | 
 | 		.size	= 0x00100000, | 
 | 		.offset	= MTDPART_OFS_APPEND, | 
 | 		.mask_flags = MTD_WRITEABLE, | 
 | 	}, | 
 | 	{ | 
 | 		.name	= "kernel", | 
 | 		.size	= 0x002c0000, | 
 | 		.offset	= MTDPART_OFS_APPEND, | 
 | 	}, | 
 | 	{ | 
 | 		.name	= "yamon env", | 
 | 		.size	= 0x00040000, | 
 | 		.offset	= MTDPART_OFS_APPEND, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct physmap_flash_data mtx1_flash_data = { | 
 | 	.width		= 4, | 
 | 	.nr_parts	= 4, | 
 | 	.parts		= mtx1_mtd_partitions, | 
 | }; | 
 |  | 
 | static struct resource mtx1_mtd_resource = { | 
 | 	.start	= 0x1e000000, | 
 | 	.end	= 0x1fffffff, | 
 | 	.flags	= IORESOURCE_MEM, | 
 | }; | 
 |  | 
 | static struct platform_device mtx1_mtd = { | 
 | 	.name		= "physmap-flash", | 
 | 	.dev		= { | 
 | 		.platform_data	= &mtx1_flash_data, | 
 | 	}, | 
 | 	.num_resources	= 1, | 
 | 	.resource	= &mtx1_mtd_resource, | 
 | }; | 
 |  | 
 | static struct __initdata platform_device * mtx1_devs[] = { | 
 | 	&mtx1_gpio_leds, | 
 | 	&mtx1_wdt, | 
 | 	&mtx1_button, | 
 | 	&mtx1_mtd, | 
 | }; | 
 |  | 
 | static int __init mtx1_register_devices(void) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	rc = gpio_request(mtx1_gpio_button[0].gpio, | 
 | 					mtx1_gpio_button[0].desc); | 
 | 	if (rc < 0) { | 
 | 		printk(KERN_INFO "mtx1: failed to request %d\n", | 
 | 					mtx1_gpio_button[0].gpio); | 
 | 		goto out; | 
 | 	} | 
 | 	gpio_direction_input(mtx1_gpio_button[0].gpio); | 
 | out: | 
 | 	return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs)); | 
 | } | 
 |  | 
 | arch_initcall(mtx1_register_devices); |