| /* | |
| * arch/sh/kernel/setup.c | |
| * | |
| * This file handles the architecture-dependent parts of initialization | |
| * | |
| * Copyright (C) 1999 Niibe Yutaka | |
| * Copyright (C) 2002 - 2010 Paul Mundt | |
| */ | |
| #include <linux/screen_info.h> | |
| #include <linux/ioport.h> | |
| #include <linux/init.h> | |
| #include <linux/initrd.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/console.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/root_dev.h> | |
| #include <linux/utsname.h> | |
| #include <linux/nodemask.h> | |
| #include <linux/cpu.h> | |
| #include <linux/pfn.h> | |
| #include <linux/fs.h> | |
| #include <linux/mm.h> | |
| #include <linux/kexec.h> | |
| #include <linux/module.h> | |
| #include <linux/smp.h> | |
| #include <linux/err.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/crash_dump.h> | |
| #include <linux/mmzone.h> | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/memblock.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/io.h> | |
| #include <asm/page.h> | |
| #include <asm/elf.h> | |
| #include <asm/sections.h> | |
| #include <asm/irq.h> | |
| #include <asm/setup.h> | |
| #include <asm/clock.h> | |
| #include <asm/smp.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/mmzone.h> | |
| /* | |
| * Initialize loops_per_jiffy as 10000000 (1000MIPS). | |
| * This value will be used at the very early stage of serial setup. | |
| * The bigger value means no problem. | |
| */ | |
| struct sh_cpuinfo cpu_data[NR_CPUS] __read_mostly = { | |
| [0] = { | |
| .type = CPU_SH_NONE, | |
| .family = CPU_FAMILY_UNKNOWN, | |
| .loops_per_jiffy = 10000000, | |
| }, | |
| }; | |
| EXPORT_SYMBOL(cpu_data); | |
| /* | |
| * The machine vector. First entry in .machvec.init, or clobbered by | |
| * sh_mv= on the command line, prior to .machvec.init teardown. | |
| */ | |
| struct sh_machine_vector sh_mv = { .mv_name = "generic", }; | |
| EXPORT_SYMBOL(sh_mv); | |
| #ifdef CONFIG_VT | |
| struct screen_info screen_info; | |
| #endif | |
| extern int root_mountflags; | |
| #define RAMDISK_IMAGE_START_MASK 0x07FF | |
| #define RAMDISK_PROMPT_FLAG 0x8000 | |
| #define RAMDISK_LOAD_FLAG 0x4000 | |
| static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, }; | |
| static struct resource code_resource = { | |
| .name = "Kernel code", | |
| .flags = IORESOURCE_BUSY | IORESOURCE_MEM, | |
| }; | |
| static struct resource data_resource = { | |
| .name = "Kernel data", | |
| .flags = IORESOURCE_BUSY | IORESOURCE_MEM, | |
| }; | |
| static struct resource bss_resource = { | |
| .name = "Kernel bss", | |
| .flags = IORESOURCE_BUSY | IORESOURCE_MEM, | |
| }; | |
| unsigned long memory_start; | |
| EXPORT_SYMBOL(memory_start); | |
| unsigned long memory_end = 0; | |
| EXPORT_SYMBOL(memory_end); | |
| unsigned long memory_limit = 0; | |
| static struct resource mem_resources[MAX_NUMNODES]; | |
| int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; | |
| static int __init early_parse_mem(char *p) | |
| { | |
| if (!p) | |
| return 1; | |
| memory_limit = PAGE_ALIGN(memparse(p, &p)); | |
| pr_notice("Memory limited to %ldMB\n", memory_limit >> 20); | |
| return 0; | |
| } | |
| early_param("mem", early_parse_mem); | |
| void __init check_for_initrd(void) | |
| { | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| unsigned long start, end; | |
| /* | |
| * Check for the rare cases where boot loaders adhere to the boot | |
| * ABI. | |
| */ | |
| if (!LOADER_TYPE || !INITRD_START || !INITRD_SIZE) | |
| goto disable; | |
| start = INITRD_START + __MEMORY_START; | |
| end = start + INITRD_SIZE; | |
| if (unlikely(end <= start)) | |
| goto disable; | |
| if (unlikely(start & ~PAGE_MASK)) { | |
| pr_err("initrd must be page aligned\n"); | |
| goto disable; | |
| } | |
| if (unlikely(start < PAGE_OFFSET)) { | |
| pr_err("initrd start < PAGE_OFFSET\n"); | |
| goto disable; | |
| } | |
| if (unlikely(end > memblock_end_of_DRAM())) { | |
| pr_err("initrd extends beyond end of memory " | |
| "(0x%08lx > 0x%08lx)\ndisabling initrd\n", | |
| end, (unsigned long)memblock_end_of_DRAM()); | |
| goto disable; | |
| } | |
| /* | |
| * If we got this far inspite of the boot loader's best efforts | |
| * to the contrary, assume we actually have a valid initrd and | |
| * fix up the root dev. | |
| */ | |
| ROOT_DEV = Root_RAM0; | |
| /* | |
| * Address sanitization | |
| */ | |
| initrd_start = (unsigned long)__va(__pa(start)); | |
| initrd_end = initrd_start + INITRD_SIZE; | |
| memblock_reserve(__pa(initrd_start), INITRD_SIZE); | |
| return; | |
| disable: | |
| pr_info("initrd disabled\n"); | |
| initrd_start = initrd_end = 0; | |
| #endif | |
| } | |
| void __cpuinit calibrate_delay(void) | |
| { | |
| struct clk *clk = clk_get(NULL, "cpu_clk"); | |
| if (IS_ERR(clk)) | |
| panic("Need a sane CPU clock definition!"); | |
| loops_per_jiffy = (clk_get_rate(clk) >> 1) / HZ; | |
| printk(KERN_INFO "Calibrating delay loop (skipped)... " | |
| "%lu.%02lu BogoMIPS PRESET (lpj=%lu)\n", | |
| loops_per_jiffy/(500000/HZ), | |
| (loops_per_jiffy/(5000/HZ)) % 100, | |
| loops_per_jiffy); | |
| } | |
| void __init __add_active_range(unsigned int nid, unsigned long start_pfn, | |
| unsigned long end_pfn) | |
| { | |
| struct resource *res = &mem_resources[nid]; | |
| unsigned long start, end; | |
| WARN_ON(res->name); /* max one active range per node for now */ | |
| start = start_pfn << PAGE_SHIFT; | |
| end = end_pfn << PAGE_SHIFT; | |
| res->name = "System RAM"; | |
| res->start = start; | |
| res->end = end - 1; | |
| res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; | |
| if (request_resource(&iomem_resource, res)) { | |
| pr_err("unable to request memory_resource 0x%lx 0x%lx\n", | |
| start_pfn, end_pfn); | |
| return; | |
| } | |
| /* | |
| * We don't know which RAM region contains kernel data, | |
| * so we try it repeatedly and let the resource manager | |
| * test it. | |
| */ | |
| request_resource(res, &code_resource); | |
| request_resource(res, &data_resource); | |
| request_resource(res, &bss_resource); | |
| /* | |
| * Also make sure that there is a PMB mapping that covers this | |
| * range before we attempt to activate it, to avoid reset by MMU. | |
| * We can hit this path with NUMA or memory hot-add. | |
| */ | |
| pmb_bolt_mapping((unsigned long)__va(start), start, end - start, | |
| PAGE_KERNEL); | |
| add_active_range(nid, start_pfn, end_pfn); | |
| } | |
| void __init __weak plat_early_device_setup(void) | |
| { | |
| } | |
| void __init setup_arch(char **cmdline_p) | |
| { | |
| enable_mmu(); | |
| ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); | |
| printk(KERN_NOTICE "Boot params:\n" | |
| "... MOUNT_ROOT_RDONLY - %08lx\n" | |
| "... RAMDISK_FLAGS - %08lx\n" | |
| "... ORIG_ROOT_DEV - %08lx\n" | |
| "... LOADER_TYPE - %08lx\n" | |
| "... INITRD_START - %08lx\n" | |
| "... INITRD_SIZE - %08lx\n", | |
| MOUNT_ROOT_RDONLY, RAMDISK_FLAGS, | |
| ORIG_ROOT_DEV, LOADER_TYPE, | |
| INITRD_START, INITRD_SIZE); | |
| #ifdef CONFIG_BLK_DEV_RAM | |
| rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK; | |
| rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0); | |
| rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0); | |
| #endif | |
| if (!MOUNT_ROOT_RDONLY) | |
| root_mountflags &= ~MS_RDONLY; | |
| init_mm.start_code = (unsigned long) _text; | |
| init_mm.end_code = (unsigned long) _etext; | |
| init_mm.end_data = (unsigned long) _edata; | |
| init_mm.brk = (unsigned long) _end; | |
| code_resource.start = virt_to_phys(_text); | |
| code_resource.end = virt_to_phys(_etext)-1; | |
| data_resource.start = virt_to_phys(_etext); | |
| data_resource.end = virt_to_phys(_edata)-1; | |
| bss_resource.start = virt_to_phys(__bss_start); | |
| bss_resource.end = virt_to_phys(_ebss)-1; | |
| #ifdef CONFIG_CMDLINE_OVERWRITE | |
| strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line)); | |
| #else | |
| strlcpy(command_line, COMMAND_LINE, sizeof(command_line)); | |
| #ifdef CONFIG_CMDLINE_EXTEND | |
| strlcat(command_line, " ", sizeof(command_line)); | |
| strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line)); | |
| #endif | |
| #endif | |
| /* Save unparsed command line copy for /proc/cmdline */ | |
| memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); | |
| *cmdline_p = command_line; | |
| parse_early_param(); | |
| plat_early_device_setup(); | |
| sh_mv_setup(); | |
| /* Let earlyprintk output early console messages */ | |
| early_platform_driver_probe("earlyprintk", 1, 1); | |
| paging_init(); | |
| #ifdef CONFIG_DUMMY_CONSOLE | |
| conswitchp = &dummy_con; | |
| #endif | |
| /* Perform the machine specific initialisation */ | |
| if (likely(sh_mv.mv_setup)) | |
| sh_mv.mv_setup(cmdline_p); | |
| plat_smp_setup(); | |
| } | |
| /* processor boot mode configuration */ | |
| int generic_mode_pins(void) | |
| { | |
| pr_warning("generic_mode_pins(): missing mode pin configuration\n"); | |
| return 0; | |
| } | |
| int test_mode_pin(int pin) | |
| { | |
| return sh_mv.mv_mode_pins() & pin; | |
| } | |
| static const char *cpu_name[] = { | |
| [CPU_SH7201] = "SH7201", | |
| [CPU_SH7203] = "SH7203", [CPU_SH7263] = "SH7263", | |
| [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", | |
| [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", | |
| [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", | |
| [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", | |
| [CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720", | |
| [CPU_SH7721] = "SH7721", [CPU_SH7729] = "SH7729", | |
| [CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S", | |
| [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751", | |
| [CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760", | |
| [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", | |
| [CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770", | |
| [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", | |
| [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", | |
| [CPU_SH7786] = "SH7786", [CPU_SH7757] = "SH7757", | |
| [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3", | |
| [CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103", | |
| [CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723", | |
| [CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724", | |
| [CPU_SH_NONE] = "Unknown" | |
| }; | |
| const char *get_cpu_subtype(struct sh_cpuinfo *c) | |
| { | |
| return cpu_name[c->type]; | |
| } | |
| EXPORT_SYMBOL(get_cpu_subtype); | |
| #ifdef CONFIG_PROC_FS | |
| /* Symbolic CPU flags, keep in sync with asm/cpu-features.h */ | |
| static const char *cpu_flags[] = { | |
| "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", | |
| "ptea", "llsc", "l2", "op32", "pteaex", NULL | |
| }; | |
| static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c) | |
| { | |
| unsigned long i; | |
| seq_printf(m, "cpu flags\t:"); | |
| if (!c->flags) { | |
| seq_printf(m, " %s\n", cpu_flags[0]); | |
| return; | |
| } | |
| for (i = 0; cpu_flags[i]; i++) | |
| if ((c->flags & (1 << i))) | |
| seq_printf(m, " %s", cpu_flags[i+1]); | |
| seq_printf(m, "\n"); | |
| } | |
| static void show_cacheinfo(struct seq_file *m, const char *type, | |
| struct cache_info info) | |
| { | |
| unsigned int cache_size; | |
| cache_size = info.ways * info.sets * info.linesz; | |
| seq_printf(m, "%s size\t: %2dKiB (%d-way)\n", | |
| type, cache_size >> 10, info.ways); | |
| } | |
| /* | |
| * Get CPU information for use by the procfs. | |
| */ | |
| static int show_cpuinfo(struct seq_file *m, void *v) | |
| { | |
| struct sh_cpuinfo *c = v; | |
| unsigned int cpu = c - cpu_data; | |
| if (!cpu_online(cpu)) | |
| return 0; | |
| if (cpu == 0) | |
| seq_printf(m, "machine\t\t: %s\n", get_system_type()); | |
| else | |
| seq_printf(m, "\n"); | |
| seq_printf(m, "processor\t: %d\n", cpu); | |
| seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine); | |
| seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c)); | |
| if (c->cut_major == -1) | |
| seq_printf(m, "cut\t\t: unknown\n"); | |
| else if (c->cut_minor == -1) | |
| seq_printf(m, "cut\t\t: %d.x\n", c->cut_major); | |
| else | |
| seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor); | |
| show_cpuflags(m, c); | |
| seq_printf(m, "cache type\t: "); | |
| /* | |
| * Check for what type of cache we have, we support both the | |
| * unified cache on the SH-2 and SH-3, as well as the harvard | |
| * style cache on the SH-4. | |
| */ | |
| if (c->icache.flags & SH_CACHE_COMBINED) { | |
| seq_printf(m, "unified\n"); | |
| show_cacheinfo(m, "cache", c->icache); | |
| } else { | |
| seq_printf(m, "split (harvard)\n"); | |
| show_cacheinfo(m, "icache", c->icache); | |
| show_cacheinfo(m, "dcache", c->dcache); | |
| } | |
| /* Optional secondary cache */ | |
| if (c->flags & CPU_HAS_L2_CACHE) | |
| show_cacheinfo(m, "scache", c->scache); | |
| seq_printf(m, "bogomips\t: %lu.%02lu\n", | |
| c->loops_per_jiffy/(500000/HZ), | |
| (c->loops_per_jiffy/(5000/HZ)) % 100); | |
| return 0; | |
| } | |
| static void *c_start(struct seq_file *m, loff_t *pos) | |
| { | |
| return *pos < NR_CPUS ? cpu_data + *pos : NULL; | |
| } | |
| static void *c_next(struct seq_file *m, void *v, loff_t *pos) | |
| { | |
| ++*pos; | |
| return c_start(m, pos); | |
| } | |
| static void c_stop(struct seq_file *m, void *v) | |
| { | |
| } | |
| const struct seq_operations cpuinfo_op = { | |
| .start = c_start, | |
| .next = c_next, | |
| .stop = c_stop, | |
| .show = show_cpuinfo, | |
| }; | |
| #endif /* CONFIG_PROC_FS */ | |
| struct dentry *sh_debugfs_root; | |
| static int __init sh_debugfs_init(void) | |
| { | |
| sh_debugfs_root = debugfs_create_dir("sh", NULL); | |
| if (!sh_debugfs_root) | |
| return -ENOMEM; | |
| if (IS_ERR(sh_debugfs_root)) | |
| return PTR_ERR(sh_debugfs_root); | |
| return 0; | |
| } | |
| arch_initcall(sh_debugfs_init); |