|  | /* | 
|  | * This file is part of wl1251 | 
|  | * | 
|  | * Copyright (C) 2009 Nokia Corporation | 
|  | * | 
|  | * Contact: Kalle Valo <kalle.valo@nokia.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #include "wl1251_init.h" | 
|  | #include "wl12xx_80211.h" | 
|  | #include "wl1251_acx.h" | 
|  | #include "wl1251_cmd.h" | 
|  | #include "wl1251_reg.h" | 
|  |  | 
|  | int wl1251_hw_init_hwenc_config(struct wl1251 *wl) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = wl1251_acx_feature_cfg(wl); | 
|  | if (ret < 0) { | 
|  | wl1251_warning("couldn't set feature config"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = wl1251_acx_default_key(wl, wl->default_key); | 
|  | if (ret < 0) { | 
|  | wl1251_warning("couldn't set default key"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wl1251_hw_init_templates_config(struct wl1251 *wl) | 
|  | { | 
|  | int ret; | 
|  | u8 partial_vbm[PARTIAL_VBM_MAX]; | 
|  |  | 
|  | /* send empty templates for fw memory reservation */ | 
|  | ret = wl1251_cmd_template_set(wl, CMD_PROBE_REQ, NULL, | 
|  | sizeof(struct wl12xx_probe_req_template)); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA, NULL, | 
|  | sizeof(struct wl12xx_null_data_template)); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1251_cmd_template_set(wl, CMD_PS_POLL, NULL, | 
|  | sizeof(struct wl12xx_ps_poll_template)); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1251_cmd_template_set(wl, CMD_QOS_NULL_DATA, NULL, | 
|  | sizeof | 
|  | (struct wl12xx_qos_null_data_template)); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, NULL, | 
|  | sizeof | 
|  | (struct wl12xx_probe_resp_template)); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1251_cmd_template_set(wl, CMD_BEACON, NULL, | 
|  | sizeof | 
|  | (struct wl12xx_beacon_template)); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* tim templates, first reserve space then allocate an empty one */ | 
|  | memset(partial_vbm, 0, PARTIAL_VBM_MAX); | 
|  | ret = wl1251_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, PARTIAL_VBM_MAX, 0); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1251_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, 1, 0); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wl1251_hw_init_rx_config(struct wl1251 *wl, u32 config, u32 filter) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = wl1251_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1251_acx_rx_config(wl, config, filter); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wl1251_hw_init_phy_config(struct wl1251 *wl) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = wl1251_acx_pd_threshold(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1251_acx_slot(wl, DEFAULT_SLOT_TIME); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1251_acx_group_address_tbl(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1251_acx_service_period_timeout(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1251_acx_rts_threshold(wl, RTS_THRESHOLD_DEF); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wl1251_hw_init_beacon_filter(struct wl1251 *wl) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = wl1251_acx_beacon_filter_opt(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1251_acx_beacon_filter_table(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wl1251_hw_init_pta(struct wl1251 *wl) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = wl1251_acx_sg_enable(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1251_acx_sg_cfg(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wl1251_hw_init_energy_detection(struct wl1251 *wl) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = wl1251_acx_cca_threshold(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wl1251_hw_init_beacon_broadcast(struct wl1251 *wl) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = wl1251_acx_bcn_dtim_options(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wl1251_hw_init_power_auth(struct wl1251 *wl) | 
|  | { | 
|  | return wl1251_acx_sleep_auth(wl, WL1251_PSM_CAM); | 
|  | } | 
|  |  | 
|  | int wl1251_hw_init_mem_config(struct wl1251 *wl) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = wl1251_acx_mem_cfg(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map), | 
|  | GFP_KERNEL); | 
|  | if (!wl->target_mem_map) { | 
|  | wl1251_error("couldn't allocate target memory map"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* we now ask for the firmware built memory map */ | 
|  | ret = wl1251_acx_mem_map(wl, wl->target_mem_map, | 
|  | sizeof(struct wl1251_acx_mem_map)); | 
|  | if (ret < 0) { | 
|  | wl1251_error("couldn't retrieve firmware memory map"); | 
|  | kfree(wl->target_mem_map); | 
|  | wl->target_mem_map = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl1251_hw_init_txq_fill(u8 qid, | 
|  | struct acx_tx_queue_qos_config *config, | 
|  | u32 num_blocks) | 
|  | { | 
|  | config->qid = qid; | 
|  |  | 
|  | switch (qid) { | 
|  | case QOS_AC_BE: | 
|  | config->high_threshold = | 
|  | (QOS_TX_HIGH_BE_DEF * num_blocks) / 100; | 
|  | config->low_threshold = | 
|  | (QOS_TX_LOW_BE_DEF * num_blocks) / 100; | 
|  | break; | 
|  | case QOS_AC_BK: | 
|  | config->high_threshold = | 
|  | (QOS_TX_HIGH_BK_DEF * num_blocks) / 100; | 
|  | config->low_threshold = | 
|  | (QOS_TX_LOW_BK_DEF * num_blocks) / 100; | 
|  | break; | 
|  | case QOS_AC_VI: | 
|  | config->high_threshold = | 
|  | (QOS_TX_HIGH_VI_DEF * num_blocks) / 100; | 
|  | config->low_threshold = | 
|  | (QOS_TX_LOW_VI_DEF * num_blocks) / 100; | 
|  | break; | 
|  | case QOS_AC_VO: | 
|  | config->high_threshold = | 
|  | (QOS_TX_HIGH_VO_DEF * num_blocks) / 100; | 
|  | config->low_threshold = | 
|  | (QOS_TX_LOW_VO_DEF * num_blocks) / 100; | 
|  | break; | 
|  | default: | 
|  | wl1251_error("Invalid TX queue id: %d", qid); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl1251_hw_init_tx_queue_config(struct wl1251 *wl) | 
|  | { | 
|  | struct acx_tx_queue_qos_config *config; | 
|  | struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map; | 
|  | int ret, i; | 
|  |  | 
|  | wl1251_debug(DEBUG_ACX, "acx tx queue config"); | 
|  |  | 
|  | config = kzalloc(sizeof(*config), GFP_KERNEL); | 
|  | if (!config) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < MAX_NUM_OF_AC; i++) { | 
|  | ret = wl1251_hw_init_txq_fill(i, config, | 
|  | wl_mem_map->num_tx_mem_blocks); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | ret = wl1251_cmd_configure(wl, ACX_TX_QUEUE_CFG, | 
|  | config, sizeof(*config)); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(config); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int wl1251_hw_init_data_path_config(struct wl1251 *wl) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* asking for the data path parameters */ | 
|  | wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp), | 
|  | GFP_KERNEL); | 
|  | if (!wl->data_path) { | 
|  | wl1251_error("Couldnt allocate data path parameters"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ret = wl1251_acx_data_path_params(wl, wl->data_path); | 
|  | if (ret < 0) { | 
|  | kfree(wl->data_path); | 
|  | wl->data_path = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | int wl1251_hw_init(struct wl1251 *wl) | 
|  | { | 
|  | struct wl1251_acx_mem_map *wl_mem_map; | 
|  | int ret; | 
|  |  | 
|  | ret = wl1251_hw_init_hwenc_config(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* Template settings */ | 
|  | ret = wl1251_hw_init_templates_config(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* Default memory configuration */ | 
|  | ret = wl1251_hw_init_mem_config(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* Default data path configuration  */ | 
|  | ret = wl1251_hw_init_data_path_config(wl); | 
|  | if (ret < 0) | 
|  | goto out_free_memmap; | 
|  |  | 
|  | /* RX config */ | 
|  | ret = wl1251_hw_init_rx_config(wl, | 
|  | RX_CFG_PROMISCUOUS | RX_CFG_TSF, | 
|  | RX_FILTER_OPTION_DEF); | 
|  | /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS, | 
|  | RX_FILTER_OPTION_FILTER_ALL); */ | 
|  | if (ret < 0) | 
|  | goto out_free_data_path; | 
|  |  | 
|  | /* TX queues config */ | 
|  | ret = wl1251_hw_init_tx_queue_config(wl); | 
|  | if (ret < 0) | 
|  | goto out_free_data_path; | 
|  |  | 
|  | /* PHY layer config */ | 
|  | ret = wl1251_hw_init_phy_config(wl); | 
|  | if (ret < 0) | 
|  | goto out_free_data_path; | 
|  |  | 
|  | /* Beacon filtering */ | 
|  | ret = wl1251_hw_init_beacon_filter(wl); | 
|  | if (ret < 0) | 
|  | goto out_free_data_path; | 
|  |  | 
|  | /* Bluetooth WLAN coexistence */ | 
|  | ret = wl1251_hw_init_pta(wl); | 
|  | if (ret < 0) | 
|  | goto out_free_data_path; | 
|  |  | 
|  | /* Energy detection */ | 
|  | ret = wl1251_hw_init_energy_detection(wl); | 
|  | if (ret < 0) | 
|  | goto out_free_data_path; | 
|  |  | 
|  | /* Beacons and boradcast settings */ | 
|  | ret = wl1251_hw_init_beacon_broadcast(wl); | 
|  | if (ret < 0) | 
|  | goto out_free_data_path; | 
|  |  | 
|  | /* Enable data path */ | 
|  | ret = wl1251_cmd_data_path(wl, wl->channel, 1); | 
|  | if (ret < 0) | 
|  | goto out_free_data_path; | 
|  |  | 
|  | /* Default power state */ | 
|  | ret = wl1251_hw_init_power_auth(wl); | 
|  | if (ret < 0) | 
|  | goto out_free_data_path; | 
|  |  | 
|  | wl_mem_map = wl->target_mem_map; | 
|  | wl1251_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x", | 
|  | wl_mem_map->num_tx_mem_blocks, | 
|  | wl->data_path->tx_control_addr, | 
|  | wl_mem_map->num_rx_mem_blocks, | 
|  | wl->data_path->rx_control_addr); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_free_data_path: | 
|  | kfree(wl->data_path); | 
|  |  | 
|  | out_free_memmap: | 
|  | kfree(wl->target_mem_map); | 
|  |  | 
|  | return ret; | 
|  | } |