| /* | |
| * linux/fs/inode.c | |
| * | |
| * (C) 1997 Linus Torvalds | |
| */ | |
| #include <linux/config.h> | |
| #include <linux/fs.h> | |
| #include <linux/mm.h> | |
| #include <linux/dcache.h> | |
| #include <linux/init.h> | |
| #include <linux/quotaops.h> | |
| #include <linux/slab.h> | |
| #include <linux/writeback.h> | |
| #include <linux/module.h> | |
| #include <linux/backing-dev.h> | |
| #include <linux/wait.h> | |
| #include <linux/hash.h> | |
| #include <linux/swap.h> | |
| #include <linux/security.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/cdev.h> | |
| #include <linux/bootmem.h> | |
| /* | |
| * This is needed for the following functions: | |
| * - inode_has_buffers | |
| * - invalidate_inode_buffers | |
| * - invalidate_bdev | |
| * | |
| * FIXME: remove all knowledge of the buffer layer from this file | |
| */ | |
| #include <linux/buffer_head.h> | |
| /* | |
| * New inode.c implementation. | |
| * | |
| * This implementation has the basic premise of trying | |
| * to be extremely low-overhead and SMP-safe, yet be | |
| * simple enough to be "obviously correct". | |
| * | |
| * Famous last words. | |
| */ | |
| /* inode dynamic allocation 1999, Andrea Arcangeli <andrea@suse.de> */ | |
| /* #define INODE_PARANOIA 1 */ | |
| /* #define INODE_DEBUG 1 */ | |
| /* | |
| * Inode lookup is no longer as critical as it used to be: | |
| * most of the lookups are going to be through the dcache. | |
| */ | |
| #define I_HASHBITS i_hash_shift | |
| #define I_HASHMASK i_hash_mask | |
| static unsigned int i_hash_mask; | |
| static unsigned int i_hash_shift; | |
| /* | |
| * Each inode can be on two separate lists. One is | |
| * the hash list of the inode, used for lookups. The | |
| * other linked list is the "type" list: | |
| * "in_use" - valid inode, i_count > 0, i_nlink > 0 | |
| * "dirty" - as "in_use" but also dirty | |
| * "unused" - valid inode, i_count = 0 | |
| * | |
| * A "dirty" list is maintained for each super block, | |
| * allowing for low-overhead inode sync() operations. | |
| */ | |
| LIST_HEAD(inode_in_use); | |
| LIST_HEAD(inode_unused); | |
| static struct hlist_head *inode_hashtable; | |
| /* | |
| * A simple spinlock to protect the list manipulations. | |
| * | |
| * NOTE! You also have to own the lock if you change | |
| * the i_state of an inode while it is in use.. | |
| */ | |
| DEFINE_SPINLOCK(inode_lock); | |
| /* | |
| * iprune_sem provides exclusion between the kswapd or try_to_free_pages | |
| * icache shrinking path, and the umount path. Without this exclusion, | |
| * by the time prune_icache calls iput for the inode whose pages it has | |
| * been invalidating, or by the time it calls clear_inode & destroy_inode | |
| * from its final dispose_list, the struct super_block they refer to | |
| * (for inode->i_sb->s_op) may already have been freed and reused. | |
| */ | |
| DECLARE_MUTEX(iprune_sem); | |
| /* | |
| * Statistics gathering.. | |
| */ | |
| struct inodes_stat_t inodes_stat; | |
| static kmem_cache_t * inode_cachep; | |
| static struct inode *alloc_inode(struct super_block *sb) | |
| { | |
| static struct address_space_operations empty_aops; | |
| static struct inode_operations empty_iops; | |
| static struct file_operations empty_fops; | |
| struct inode *inode; | |
| if (sb->s_op->alloc_inode) | |
| inode = sb->s_op->alloc_inode(sb); | |
| else | |
| inode = (struct inode *) kmem_cache_alloc(inode_cachep, SLAB_KERNEL); | |
| if (inode) { | |
| struct address_space * const mapping = &inode->i_data; | |
| inode->i_sb = sb; | |
| inode->i_blkbits = sb->s_blocksize_bits; | |
| inode->i_flags = 0; | |
| atomic_set(&inode->i_count, 1); | |
| inode->i_op = &empty_iops; | |
| inode->i_fop = &empty_fops; | |
| inode->i_nlink = 1; | |
| atomic_set(&inode->i_writecount, 0); | |
| inode->i_size = 0; | |
| inode->i_blocks = 0; | |
| inode->i_bytes = 0; | |
| inode->i_generation = 0; | |
| #ifdef CONFIG_QUOTA | |
| memset(&inode->i_dquot, 0, sizeof(inode->i_dquot)); | |
| #endif | |
| inode->i_pipe = NULL; | |
| inode->i_bdev = NULL; | |
| inode->i_cdev = NULL; | |
| inode->i_rdev = 0; | |
| inode->i_security = NULL; | |
| inode->dirtied_when = 0; | |
| if (security_inode_alloc(inode)) { | |
| if (inode->i_sb->s_op->destroy_inode) | |
| inode->i_sb->s_op->destroy_inode(inode); | |
| else | |
| kmem_cache_free(inode_cachep, (inode)); | |
| return NULL; | |
| } | |
| mapping->a_ops = &empty_aops; | |
| mapping->host = inode; | |
| mapping->flags = 0; | |
| mapping_set_gfp_mask(mapping, GFP_HIGHUSER); | |
| mapping->assoc_mapping = NULL; | |
| mapping->backing_dev_info = &default_backing_dev_info; | |
| /* | |
| * If the block_device provides a backing_dev_info for client | |
| * inodes then use that. Otherwise the inode share the bdev's | |
| * backing_dev_info. | |
| */ | |
| if (sb->s_bdev) { | |
| struct backing_dev_info *bdi; | |
| bdi = sb->s_bdev->bd_inode_backing_dev_info; | |
| if (!bdi) | |
| bdi = sb->s_bdev->bd_inode->i_mapping->backing_dev_info; | |
| mapping->backing_dev_info = bdi; | |
| } | |
| memset(&inode->u, 0, sizeof(inode->u)); | |
| inode->i_mapping = mapping; | |
| } | |
| return inode; | |
| } | |
| void destroy_inode(struct inode *inode) | |
| { | |
| if (inode_has_buffers(inode)) | |
| BUG(); | |
| security_inode_free(inode); | |
| if (inode->i_sb->s_op->destroy_inode) | |
| inode->i_sb->s_op->destroy_inode(inode); | |
| else | |
| kmem_cache_free(inode_cachep, (inode)); | |
| } | |
| /* | |
| * These are initializations that only need to be done | |
| * once, because the fields are idempotent across use | |
| * of the inode, so let the slab aware of that. | |
| */ | |
| void inode_init_once(struct inode *inode) | |
| { | |
| memset(inode, 0, sizeof(*inode)); | |
| INIT_HLIST_NODE(&inode->i_hash); | |
| INIT_LIST_HEAD(&inode->i_dentry); | |
| INIT_LIST_HEAD(&inode->i_devices); | |
| sema_init(&inode->i_sem, 1); | |
| init_rwsem(&inode->i_alloc_sem); | |
| INIT_RADIX_TREE(&inode->i_data.page_tree, GFP_ATOMIC); | |
| rwlock_init(&inode->i_data.tree_lock); | |
| spin_lock_init(&inode->i_data.i_mmap_lock); | |
| INIT_LIST_HEAD(&inode->i_data.private_list); | |
| spin_lock_init(&inode->i_data.private_lock); | |
| INIT_RAW_PRIO_TREE_ROOT(&inode->i_data.i_mmap); | |
| INIT_LIST_HEAD(&inode->i_data.i_mmap_nonlinear); | |
| spin_lock_init(&inode->i_lock); | |
| i_size_ordered_init(inode); | |
| } | |
| EXPORT_SYMBOL(inode_init_once); | |
| static void init_once(void * foo, kmem_cache_t * cachep, unsigned long flags) | |
| { | |
| struct inode * inode = (struct inode *) foo; | |
| if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) == | |
| SLAB_CTOR_CONSTRUCTOR) | |
| inode_init_once(inode); | |
| } | |
| /* | |
| * inode_lock must be held | |
| */ | |
| void __iget(struct inode * inode) | |
| { | |
| if (atomic_read(&inode->i_count)) { | |
| atomic_inc(&inode->i_count); | |
| return; | |
| } | |
| atomic_inc(&inode->i_count); | |
| if (!(inode->i_state & (I_DIRTY|I_LOCK))) | |
| list_move(&inode->i_list, &inode_in_use); | |
| inodes_stat.nr_unused--; | |
| } | |
| /** | |
| * clear_inode - clear an inode | |
| * @inode: inode to clear | |
| * | |
| * This is called by the filesystem to tell us | |
| * that the inode is no longer useful. We just | |
| * terminate it with extreme prejudice. | |
| */ | |
| void clear_inode(struct inode *inode) | |
| { | |
| might_sleep(); | |
| invalidate_inode_buffers(inode); | |
| if (inode->i_data.nrpages) | |
| BUG(); | |
| if (!(inode->i_state & I_FREEING)) | |
| BUG(); | |
| if (inode->i_state & I_CLEAR) | |
| BUG(); | |
| wait_on_inode(inode); | |
| DQUOT_DROP(inode); | |
| if (inode->i_sb && inode->i_sb->s_op->clear_inode) | |
| inode->i_sb->s_op->clear_inode(inode); | |
| if (inode->i_bdev) | |
| bd_forget(inode); | |
| if (inode->i_cdev) | |
| cd_forget(inode); | |
| inode->i_state = I_CLEAR; | |
| } | |
| EXPORT_SYMBOL(clear_inode); | |
| /* | |
| * dispose_list - dispose of the contents of a local list | |
| * @head: the head of the list to free | |
| * | |
| * Dispose-list gets a local list with local inodes in it, so it doesn't | |
| * need to worry about list corruption and SMP locks. | |
| */ | |
| static void dispose_list(struct list_head *head) | |
| { | |
| int nr_disposed = 0; | |
| while (!list_empty(head)) { | |
| struct inode *inode; | |
| inode = list_entry(head->next, struct inode, i_list); | |
| list_del(&inode->i_list); | |
| if (inode->i_data.nrpages) | |
| truncate_inode_pages(&inode->i_data, 0); | |
| clear_inode(inode); | |
| destroy_inode(inode); | |
| nr_disposed++; | |
| } | |
| spin_lock(&inode_lock); | |
| inodes_stat.nr_inodes -= nr_disposed; | |
| spin_unlock(&inode_lock); | |
| } | |
| /* | |
| * Invalidate all inodes for a device. | |
| */ | |
| static int invalidate_list(struct list_head *head, struct list_head *dispose) | |
| { | |
| struct list_head *next; | |
| int busy = 0, count = 0; | |
| next = head->next; | |
| for (;;) { | |
| struct list_head * tmp = next; | |
| struct inode * inode; | |
| /* | |
| * We can reschedule here without worrying about the list's | |
| * consistency because the per-sb list of inodes must not | |
| * change during umount anymore, and because iprune_sem keeps | |
| * shrink_icache_memory() away. | |
| */ | |
| cond_resched_lock(&inode_lock); | |
| next = next->next; | |
| if (tmp == head) | |
| break; | |
| inode = list_entry(tmp, struct inode, i_sb_list); | |
| invalidate_inode_buffers(inode); | |
| if (!atomic_read(&inode->i_count)) { | |
| hlist_del_init(&inode->i_hash); | |
| list_del(&inode->i_sb_list); | |
| list_move(&inode->i_list, dispose); | |
| inode->i_state |= I_FREEING; | |
| count++; | |
| continue; | |
| } | |
| busy = 1; | |
| } | |
| /* only unused inodes may be cached with i_count zero */ | |
| inodes_stat.nr_unused -= count; | |
| return busy; | |
| } | |
| /** | |
| * invalidate_inodes - discard the inodes on a device | |
| * @sb: superblock | |
| * | |
| * Discard all of the inodes for a given superblock. If the discard | |
| * fails because there are busy inodes then a non zero value is returned. | |
| * If the discard is successful all the inodes have been discarded. | |
| */ | |
| int invalidate_inodes(struct super_block * sb) | |
| { | |
| int busy; | |
| LIST_HEAD(throw_away); | |
| down(&iprune_sem); | |
| spin_lock(&inode_lock); | |
| busy = invalidate_list(&sb->s_inodes, &throw_away); | |
| spin_unlock(&inode_lock); | |
| dispose_list(&throw_away); | |
| up(&iprune_sem); | |
| return busy; | |
| } | |
| EXPORT_SYMBOL(invalidate_inodes); | |
| int __invalidate_device(struct block_device *bdev) | |
| { | |
| struct super_block *sb = get_super(bdev); | |
| int res = 0; | |
| if (sb) { | |
| /* | |
| * no need to lock the super, get_super holds the | |
| * read semaphore so the filesystem cannot go away | |
| * under us (->put_super runs with the write lock | |
| * hold). | |
| */ | |
| shrink_dcache_sb(sb); | |
| res = invalidate_inodes(sb); | |
| drop_super(sb); | |
| } | |
| invalidate_bdev(bdev, 0); | |
| return res; | |
| } | |
| EXPORT_SYMBOL(__invalidate_device); | |
| static int can_unuse(struct inode *inode) | |
| { | |
| if (inode->i_state) | |
| return 0; | |
| if (inode_has_buffers(inode)) | |
| return 0; | |
| if (atomic_read(&inode->i_count)) | |
| return 0; | |
| if (inode->i_data.nrpages) | |
| return 0; | |
| return 1; | |
| } | |
| /* | |
| * Scan `goal' inodes on the unused list for freeable ones. They are moved to | |
| * a temporary list and then are freed outside inode_lock by dispose_list(). | |
| * | |
| * Any inodes which are pinned purely because of attached pagecache have their | |
| * pagecache removed. We expect the final iput() on that inode to add it to | |
| * the front of the inode_unused list. So look for it there and if the | |
| * inode is still freeable, proceed. The right inode is found 99.9% of the | |
| * time in testing on a 4-way. | |
| * | |
| * If the inode has metadata buffers attached to mapping->private_list then | |
| * try to remove them. | |
| */ | |
| static void prune_icache(int nr_to_scan) | |
| { | |
| LIST_HEAD(freeable); | |
| int nr_pruned = 0; | |
| int nr_scanned; | |
| unsigned long reap = 0; | |
| down(&iprune_sem); | |
| spin_lock(&inode_lock); | |
| for (nr_scanned = 0; nr_scanned < nr_to_scan; nr_scanned++) { | |
| struct inode *inode; | |
| if (list_empty(&inode_unused)) | |
| break; | |
| inode = list_entry(inode_unused.prev, struct inode, i_list); | |
| if (inode->i_state || atomic_read(&inode->i_count)) { | |
| list_move(&inode->i_list, &inode_unused); | |
| continue; | |
| } | |
| if (inode_has_buffers(inode) || inode->i_data.nrpages) { | |
| __iget(inode); | |
| spin_unlock(&inode_lock); | |
| if (remove_inode_buffers(inode)) | |
| reap += invalidate_inode_pages(&inode->i_data); | |
| iput(inode); | |
| spin_lock(&inode_lock); | |
| if (inode != list_entry(inode_unused.next, | |
| struct inode, i_list)) | |
| continue; /* wrong inode or list_empty */ | |
| if (!can_unuse(inode)) | |
| continue; | |
| } | |
| hlist_del_init(&inode->i_hash); | |
| list_del_init(&inode->i_sb_list); | |
| list_move(&inode->i_list, &freeable); | |
| inode->i_state |= I_FREEING; | |
| nr_pruned++; | |
| } | |
| inodes_stat.nr_unused -= nr_pruned; | |
| spin_unlock(&inode_lock); | |
| dispose_list(&freeable); | |
| up(&iprune_sem); | |
| if (current_is_kswapd()) | |
| mod_page_state(kswapd_inodesteal, reap); | |
| else | |
| mod_page_state(pginodesteal, reap); | |
| } | |
| /* | |
| * shrink_icache_memory() will attempt to reclaim some unused inodes. Here, | |
| * "unused" means that no dentries are referring to the inodes: the files are | |
| * not open and the dcache references to those inodes have already been | |
| * reclaimed. | |
| * | |
| * This function is passed the number of inodes to scan, and it returns the | |
| * total number of remaining possibly-reclaimable inodes. | |
| */ | |
| static int shrink_icache_memory(int nr, unsigned int gfp_mask) | |
| { | |
| if (nr) { | |
| /* | |
| * Nasty deadlock avoidance. We may hold various FS locks, | |
| * and we don't want to recurse into the FS that called us | |
| * in clear_inode() and friends.. | |
| */ | |
| if (!(gfp_mask & __GFP_FS)) | |
| return -1; | |
| prune_icache(nr); | |
| } | |
| return (inodes_stat.nr_unused / 100) * sysctl_vfs_cache_pressure; | |
| } | |
| static void __wait_on_freeing_inode(struct inode *inode); | |
| /* | |
| * Called with the inode lock held. | |
| * NOTE: we are not increasing the inode-refcount, you must call __iget() | |
| * by hand after calling find_inode now! This simplifies iunique and won't | |
| * add any additional branch in the common code. | |
| */ | |
| static struct inode * find_inode(struct super_block * sb, struct hlist_head *head, int (*test)(struct inode *, void *), void *data) | |
| { | |
| struct hlist_node *node; | |
| struct inode * inode = NULL; | |
| repeat: | |
| hlist_for_each (node, head) { | |
| inode = hlist_entry(node, struct inode, i_hash); | |
| if (inode->i_sb != sb) | |
| continue; | |
| if (!test(inode, data)) | |
| continue; | |
| if (inode->i_state & (I_FREEING|I_CLEAR)) { | |
| __wait_on_freeing_inode(inode); | |
| goto repeat; | |
| } | |
| break; | |
| } | |
| return node ? inode : NULL; | |
| } | |
| /* | |
| * find_inode_fast is the fast path version of find_inode, see the comment at | |
| * iget_locked for details. | |
| */ | |
| static struct inode * find_inode_fast(struct super_block * sb, struct hlist_head *head, unsigned long ino) | |
| { | |
| struct hlist_node *node; | |
| struct inode * inode = NULL; | |
| repeat: | |
| hlist_for_each (node, head) { | |
| inode = hlist_entry(node, struct inode, i_hash); | |
| if (inode->i_ino != ino) | |
| continue; | |
| if (inode->i_sb != sb) | |
| continue; | |
| if (inode->i_state & (I_FREEING|I_CLEAR)) { | |
| __wait_on_freeing_inode(inode); | |
| goto repeat; | |
| } | |
| break; | |
| } | |
| return node ? inode : NULL; | |
| } | |
| /** | |
| * new_inode - obtain an inode | |
| * @sb: superblock | |
| * | |
| * Allocates a new inode for given superblock. | |
| */ | |
| struct inode *new_inode(struct super_block *sb) | |
| { | |
| static unsigned long last_ino; | |
| struct inode * inode; | |
| spin_lock_prefetch(&inode_lock); | |
| inode = alloc_inode(sb); | |
| if (inode) { | |
| spin_lock(&inode_lock); | |
| inodes_stat.nr_inodes++; | |
| list_add(&inode->i_list, &inode_in_use); | |
| list_add(&inode->i_sb_list, &sb->s_inodes); | |
| inode->i_ino = ++last_ino; | |
| inode->i_state = 0; | |
| spin_unlock(&inode_lock); | |
| } | |
| return inode; | |
| } | |
| EXPORT_SYMBOL(new_inode); | |
| void unlock_new_inode(struct inode *inode) | |
| { | |
| /* | |
| * This is special! We do not need the spinlock | |
| * when clearing I_LOCK, because we're guaranteed | |
| * that nobody else tries to do anything about the | |
| * state of the inode when it is locked, as we | |
| * just created it (so there can be no old holders | |
| * that haven't tested I_LOCK). | |
| */ | |
| inode->i_state &= ~(I_LOCK|I_NEW); | |
| wake_up_inode(inode); | |
| } | |
| EXPORT_SYMBOL(unlock_new_inode); | |
| /* | |
| * This is called without the inode lock held.. Be careful. | |
| * | |
| * We no longer cache the sb_flags in i_flags - see fs.h | |
| * -- rmk@arm.uk.linux.org | |
| */ | |
| static struct inode * get_new_inode(struct super_block *sb, struct hlist_head *head, int (*test)(struct inode *, void *), int (*set)(struct inode *, void *), void *data) | |
| { | |
| struct inode * inode; | |
| inode = alloc_inode(sb); | |
| if (inode) { | |
| struct inode * old; | |
| spin_lock(&inode_lock); | |
| /* We released the lock, so.. */ | |
| old = find_inode(sb, head, test, data); | |
| if (!old) { | |
| if (set(inode, data)) | |
| goto set_failed; | |
| inodes_stat.nr_inodes++; | |
| list_add(&inode->i_list, &inode_in_use); | |
| list_add(&inode->i_sb_list, &sb->s_inodes); | |
| hlist_add_head(&inode->i_hash, head); | |
| inode->i_state = I_LOCK|I_NEW; | |
| spin_unlock(&inode_lock); | |
| /* Return the locked inode with I_NEW set, the | |
| * caller is responsible for filling in the contents | |
| */ | |
| return inode; | |
| } | |
| /* | |
| * Uhhuh, somebody else created the same inode under | |
| * us. Use the old inode instead of the one we just | |
| * allocated. | |
| */ | |
| __iget(old); | |
| spin_unlock(&inode_lock); | |
| destroy_inode(inode); | |
| inode = old; | |
| wait_on_inode(inode); | |
| } | |
| return inode; | |
| set_failed: | |
| spin_unlock(&inode_lock); | |
| destroy_inode(inode); | |
| return NULL; | |
| } | |
| /* | |
| * get_new_inode_fast is the fast path version of get_new_inode, see the | |
| * comment at iget_locked for details. | |
| */ | |
| static struct inode * get_new_inode_fast(struct super_block *sb, struct hlist_head *head, unsigned long ino) | |
| { | |
| struct inode * inode; | |
| inode = alloc_inode(sb); | |
| if (inode) { | |
| struct inode * old; | |
| spin_lock(&inode_lock); | |
| /* We released the lock, so.. */ | |
| old = find_inode_fast(sb, head, ino); | |
| if (!old) { | |
| inode->i_ino = ino; | |
| inodes_stat.nr_inodes++; | |
| list_add(&inode->i_list, &inode_in_use); | |
| list_add(&inode->i_sb_list, &sb->s_inodes); | |
| hlist_add_head(&inode->i_hash, head); | |
| inode->i_state = I_LOCK|I_NEW; | |
| spin_unlock(&inode_lock); | |
| /* Return the locked inode with I_NEW set, the | |
| * caller is responsible for filling in the contents | |
| */ | |
| return inode; | |
| } | |
| /* | |
| * Uhhuh, somebody else created the same inode under | |
| * us. Use the old inode instead of the one we just | |
| * allocated. | |
| */ | |
| __iget(old); | |
| spin_unlock(&inode_lock); | |
| destroy_inode(inode); | |
| inode = old; | |
| wait_on_inode(inode); | |
| } | |
| return inode; | |
| } | |
| static inline unsigned long hash(struct super_block *sb, unsigned long hashval) | |
| { | |
| unsigned long tmp; | |
| tmp = (hashval * (unsigned long)sb) ^ (GOLDEN_RATIO_PRIME + hashval) / | |
| L1_CACHE_BYTES; | |
| tmp = tmp ^ ((tmp ^ GOLDEN_RATIO_PRIME) >> I_HASHBITS); | |
| return tmp & I_HASHMASK; | |
| } | |
| /** | |
| * iunique - get a unique inode number | |
| * @sb: superblock | |
| * @max_reserved: highest reserved inode number | |
| * | |
| * Obtain an inode number that is unique on the system for a given | |
| * superblock. This is used by file systems that have no natural | |
| * permanent inode numbering system. An inode number is returned that | |
| * is higher than the reserved limit but unique. | |
| * | |
| * BUGS: | |
| * With a large number of inodes live on the file system this function | |
| * currently becomes quite slow. | |
| */ | |
| ino_t iunique(struct super_block *sb, ino_t max_reserved) | |
| { | |
| static ino_t counter; | |
| struct inode *inode; | |
| struct hlist_head * head; | |
| ino_t res; | |
| spin_lock(&inode_lock); | |
| retry: | |
| if (counter > max_reserved) { | |
| head = inode_hashtable + hash(sb,counter); | |
| res = counter++; | |
| inode = find_inode_fast(sb, head, res); | |
| if (!inode) { | |
| spin_unlock(&inode_lock); | |
| return res; | |
| } | |
| } else { | |
| counter = max_reserved + 1; | |
| } | |
| goto retry; | |
| } | |
| EXPORT_SYMBOL(iunique); | |
| struct inode *igrab(struct inode *inode) | |
| { | |
| spin_lock(&inode_lock); | |
| if (!(inode->i_state & I_FREEING)) | |
| __iget(inode); | |
| else | |
| /* | |
| * Handle the case where s_op->clear_inode is not been | |
| * called yet, and somebody is calling igrab | |
| * while the inode is getting freed. | |
| */ | |
| inode = NULL; | |
| spin_unlock(&inode_lock); | |
| return inode; | |
| } | |
| EXPORT_SYMBOL(igrab); | |
| /** | |
| * ifind - internal function, you want ilookup5() or iget5(). | |
| * @sb: super block of file system to search | |
| * @head: the head of the list to search | |
| * @test: callback used for comparisons between inodes | |
| * @data: opaque data pointer to pass to @test | |
| * | |
| * ifind() searches for the inode specified by @data in the inode | |
| * cache. This is a generalized version of ifind_fast() for file systems where | |
| * the inode number is not sufficient for unique identification of an inode. | |
| * | |
| * If the inode is in the cache, the inode is returned with an incremented | |
| * reference count. | |
| * | |
| * Otherwise NULL is returned. | |
| * | |
| * Note, @test is called with the inode_lock held, so can't sleep. | |
| */ | |
| static inline struct inode *ifind(struct super_block *sb, | |
| struct hlist_head *head, int (*test)(struct inode *, void *), | |
| void *data) | |
| { | |
| struct inode *inode; | |
| spin_lock(&inode_lock); | |
| inode = find_inode(sb, head, test, data); | |
| if (inode) { | |
| __iget(inode); | |
| spin_unlock(&inode_lock); | |
| wait_on_inode(inode); | |
| return inode; | |
| } | |
| spin_unlock(&inode_lock); | |
| return NULL; | |
| } | |
| /** | |
| * ifind_fast - internal function, you want ilookup() or iget(). | |
| * @sb: super block of file system to search | |
| * @head: head of the list to search | |
| * @ino: inode number to search for | |
| * | |
| * ifind_fast() searches for the inode @ino in the inode cache. This is for | |
| * file systems where the inode number is sufficient for unique identification | |
| * of an inode. | |
| * | |
| * If the inode is in the cache, the inode is returned with an incremented | |
| * reference count. | |
| * | |
| * Otherwise NULL is returned. | |
| */ | |
| static inline struct inode *ifind_fast(struct super_block *sb, | |
| struct hlist_head *head, unsigned long ino) | |
| { | |
| struct inode *inode; | |
| spin_lock(&inode_lock); | |
| inode = find_inode_fast(sb, head, ino); | |
| if (inode) { | |
| __iget(inode); | |
| spin_unlock(&inode_lock); | |
| wait_on_inode(inode); | |
| return inode; | |
| } | |
| spin_unlock(&inode_lock); | |
| return NULL; | |
| } | |
| /** | |
| * ilookup5 - search for an inode in the inode cache | |
| * @sb: super block of file system to search | |
| * @hashval: hash value (usually inode number) to search for | |
| * @test: callback used for comparisons between inodes | |
| * @data: opaque data pointer to pass to @test | |
| * | |
| * ilookup5() uses ifind() to search for the inode specified by @hashval and | |
| * @data in the inode cache. This is a generalized version of ilookup() for | |
| * file systems where the inode number is not sufficient for unique | |
| * identification of an inode. | |
| * | |
| * If the inode is in the cache, the inode is returned with an incremented | |
| * reference count. | |
| * | |
| * Otherwise NULL is returned. | |
| * | |
| * Note, @test is called with the inode_lock held, so can't sleep. | |
| */ | |
| struct inode *ilookup5(struct super_block *sb, unsigned long hashval, | |
| int (*test)(struct inode *, void *), void *data) | |
| { | |
| struct hlist_head *head = inode_hashtable + hash(sb, hashval); | |
| return ifind(sb, head, test, data); | |
| } | |
| EXPORT_SYMBOL(ilookup5); | |
| /** | |
| * ilookup - search for an inode in the inode cache | |
| * @sb: super block of file system to search | |
| * @ino: inode number to search for | |
| * | |
| * ilookup() uses ifind_fast() to search for the inode @ino in the inode cache. | |
| * This is for file systems where the inode number is sufficient for unique | |
| * identification of an inode. | |
| * | |
| * If the inode is in the cache, the inode is returned with an incremented | |
| * reference count. | |
| * | |
| * Otherwise NULL is returned. | |
| */ | |
| struct inode *ilookup(struct super_block *sb, unsigned long ino) | |
| { | |
| struct hlist_head *head = inode_hashtable + hash(sb, ino); | |
| return ifind_fast(sb, head, ino); | |
| } | |
| EXPORT_SYMBOL(ilookup); | |
| /** | |
| * iget5_locked - obtain an inode from a mounted file system | |
| * @sb: super block of file system | |
| * @hashval: hash value (usually inode number) to get | |
| * @test: callback used for comparisons between inodes | |
| * @set: callback used to initialize a new struct inode | |
| * @data: opaque data pointer to pass to @test and @set | |
| * | |
| * This is iget() without the read_inode() portion of get_new_inode(). | |
| * | |
| * iget5_locked() uses ifind() to search for the inode specified by @hashval | |
| * and @data in the inode cache and if present it is returned with an increased | |
| * reference count. This is a generalized version of iget_locked() for file | |
| * systems where the inode number is not sufficient for unique identification | |
| * of an inode. | |
| * | |
| * If the inode is not in cache, get_new_inode() is called to allocate a new | |
| * inode and this is returned locked, hashed, and with the I_NEW flag set. The | |
| * file system gets to fill it in before unlocking it via unlock_new_inode(). | |
| * | |
| * Note both @test and @set are called with the inode_lock held, so can't sleep. | |
| */ | |
| struct inode *iget5_locked(struct super_block *sb, unsigned long hashval, | |
| int (*test)(struct inode *, void *), | |
| int (*set)(struct inode *, void *), void *data) | |
| { | |
| struct hlist_head *head = inode_hashtable + hash(sb, hashval); | |
| struct inode *inode; | |
| inode = ifind(sb, head, test, data); | |
| if (inode) | |
| return inode; | |
| /* | |
| * get_new_inode() will do the right thing, re-trying the search | |
| * in case it had to block at any point. | |
| */ | |
| return get_new_inode(sb, head, test, set, data); | |
| } | |
| EXPORT_SYMBOL(iget5_locked); | |
| /** | |
| * iget_locked - obtain an inode from a mounted file system | |
| * @sb: super block of file system | |
| * @ino: inode number to get | |
| * | |
| * This is iget() without the read_inode() portion of get_new_inode_fast(). | |
| * | |
| * iget_locked() uses ifind_fast() to search for the inode specified by @ino in | |
| * the inode cache and if present it is returned with an increased reference | |
| * count. This is for file systems where the inode number is sufficient for | |
| * unique identification of an inode. | |
| * | |
| * If the inode is not in cache, get_new_inode_fast() is called to allocate a | |
| * new inode and this is returned locked, hashed, and with the I_NEW flag set. | |
| * The file system gets to fill it in before unlocking it via | |
| * unlock_new_inode(). | |
| */ | |
| struct inode *iget_locked(struct super_block *sb, unsigned long ino) | |
| { | |
| struct hlist_head *head = inode_hashtable + hash(sb, ino); | |
| struct inode *inode; | |
| inode = ifind_fast(sb, head, ino); | |
| if (inode) | |
| return inode; | |
| /* | |
| * get_new_inode_fast() will do the right thing, re-trying the search | |
| * in case it had to block at any point. | |
| */ | |
| return get_new_inode_fast(sb, head, ino); | |
| } | |
| EXPORT_SYMBOL(iget_locked); | |
| /** | |
| * __insert_inode_hash - hash an inode | |
| * @inode: unhashed inode | |
| * @hashval: unsigned long value used to locate this object in the | |
| * inode_hashtable. | |
| * | |
| * Add an inode to the inode hash for this superblock. | |
| */ | |
| void __insert_inode_hash(struct inode *inode, unsigned long hashval) | |
| { | |
| struct hlist_head *head = inode_hashtable + hash(inode->i_sb, hashval); | |
| spin_lock(&inode_lock); | |
| hlist_add_head(&inode->i_hash, head); | |
| spin_unlock(&inode_lock); | |
| } | |
| EXPORT_SYMBOL(__insert_inode_hash); | |
| /** | |
| * remove_inode_hash - remove an inode from the hash | |
| * @inode: inode to unhash | |
| * | |
| * Remove an inode from the superblock. | |
| */ | |
| void remove_inode_hash(struct inode *inode) | |
| { | |
| spin_lock(&inode_lock); | |
| hlist_del_init(&inode->i_hash); | |
| spin_unlock(&inode_lock); | |
| } | |
| EXPORT_SYMBOL(remove_inode_hash); | |
| /* | |
| * Tell the filesystem that this inode is no longer of any interest and should | |
| * be completely destroyed. | |
| * | |
| * We leave the inode in the inode hash table until *after* the filesystem's | |
| * ->delete_inode completes. This ensures that an iget (such as nfsd might | |
| * instigate) will always find up-to-date information either in the hash or on | |
| * disk. | |
| * | |
| * I_FREEING is set so that no-one will take a new reference to the inode while | |
| * it is being deleted. | |
| */ | |
| void generic_delete_inode(struct inode *inode) | |
| { | |
| struct super_operations *op = inode->i_sb->s_op; | |
| list_del_init(&inode->i_list); | |
| list_del_init(&inode->i_sb_list); | |
| inode->i_state|=I_FREEING; | |
| inodes_stat.nr_inodes--; | |
| spin_unlock(&inode_lock); | |
| if (inode->i_data.nrpages) | |
| truncate_inode_pages(&inode->i_data, 0); | |
| security_inode_delete(inode); | |
| if (op->delete_inode) { | |
| void (*delete)(struct inode *) = op->delete_inode; | |
| if (!is_bad_inode(inode)) | |
| DQUOT_INIT(inode); | |
| /* s_op->delete_inode internally recalls clear_inode() */ | |
| delete(inode); | |
| } else | |
| clear_inode(inode); | |
| spin_lock(&inode_lock); | |
| hlist_del_init(&inode->i_hash); | |
| spin_unlock(&inode_lock); | |
| wake_up_inode(inode); | |
| if (inode->i_state != I_CLEAR) | |
| BUG(); | |
| destroy_inode(inode); | |
| } | |
| EXPORT_SYMBOL(generic_delete_inode); | |
| static void generic_forget_inode(struct inode *inode) | |
| { | |
| struct super_block *sb = inode->i_sb; | |
| if (!hlist_unhashed(&inode->i_hash)) { | |
| if (!(inode->i_state & (I_DIRTY|I_LOCK))) | |
| list_move(&inode->i_list, &inode_unused); | |
| inodes_stat.nr_unused++; | |
| spin_unlock(&inode_lock); | |
| if (!sb || (sb->s_flags & MS_ACTIVE)) | |
| return; | |
| write_inode_now(inode, 1); | |
| spin_lock(&inode_lock); | |
| inodes_stat.nr_unused--; | |
| hlist_del_init(&inode->i_hash); | |
| } | |
| list_del_init(&inode->i_list); | |
| list_del_init(&inode->i_sb_list); | |
| inode->i_state|=I_FREEING; | |
| inodes_stat.nr_inodes--; | |
| spin_unlock(&inode_lock); | |
| if (inode->i_data.nrpages) | |
| truncate_inode_pages(&inode->i_data, 0); | |
| clear_inode(inode); | |
| destroy_inode(inode); | |
| } | |
| /* | |
| * Normal UNIX filesystem behaviour: delete the | |
| * inode when the usage count drops to zero, and | |
| * i_nlink is zero. | |
| */ | |
| static void generic_drop_inode(struct inode *inode) | |
| { | |
| if (!inode->i_nlink) | |
| generic_delete_inode(inode); | |
| else | |
| generic_forget_inode(inode); | |
| } | |
| /* | |
| * Called when we're dropping the last reference | |
| * to an inode. | |
| * | |
| * Call the FS "drop()" function, defaulting to | |
| * the legacy UNIX filesystem behaviour.. | |
| * | |
| * NOTE! NOTE! NOTE! We're called with the inode lock | |
| * held, and the drop function is supposed to release | |
| * the lock! | |
| */ | |
| static inline void iput_final(struct inode *inode) | |
| { | |
| struct super_operations *op = inode->i_sb->s_op; | |
| void (*drop)(struct inode *) = generic_drop_inode; | |
| if (op && op->drop_inode) | |
| drop = op->drop_inode; | |
| drop(inode); | |
| } | |
| /** | |
| * iput - put an inode | |
| * @inode: inode to put | |
| * | |
| * Puts an inode, dropping its usage count. If the inode use count hits | |
| * zero, the inode is then freed and may also be destroyed. | |
| * | |
| * Consequently, iput() can sleep. | |
| */ | |
| void iput(struct inode *inode) | |
| { | |
| if (inode) { | |
| struct super_operations *op = inode->i_sb->s_op; | |
| BUG_ON(inode->i_state == I_CLEAR); | |
| if (op && op->put_inode) | |
| op->put_inode(inode); | |
| if (atomic_dec_and_lock(&inode->i_count, &inode_lock)) | |
| iput_final(inode); | |
| } | |
| } | |
| EXPORT_SYMBOL(iput); | |
| /** | |
| * bmap - find a block number in a file | |
| * @inode: inode of file | |
| * @block: block to find | |
| * | |
| * Returns the block number on the device holding the inode that | |
| * is the disk block number for the block of the file requested. | |
| * That is, asked for block 4 of inode 1 the function will return the | |
| * disk block relative to the disk start that holds that block of the | |
| * file. | |
| */ | |
| sector_t bmap(struct inode * inode, sector_t block) | |
| { | |
| sector_t res = 0; | |
| if (inode->i_mapping->a_ops->bmap) | |
| res = inode->i_mapping->a_ops->bmap(inode->i_mapping, block); | |
| return res; | |
| } | |
| EXPORT_SYMBOL(bmap); | |
| /** | |
| * update_atime - update the access time | |
| * @inode: inode accessed | |
| * | |
| * Update the accessed time on an inode and mark it for writeback. | |
| * This function automatically handles read only file systems and media, | |
| * as well as the "noatime" flag and inode specific "noatime" markers. | |
| */ | |
| void update_atime(struct inode *inode) | |
| { | |
| struct timespec now; | |
| if (IS_NOATIME(inode)) | |
| return; | |
| if (IS_NODIRATIME(inode) && S_ISDIR(inode->i_mode)) | |
| return; | |
| if (IS_RDONLY(inode)) | |
| return; | |
| now = current_fs_time(inode->i_sb); | |
| if (!timespec_equal(&inode->i_atime, &now)) { | |
| inode->i_atime = now; | |
| mark_inode_dirty_sync(inode); | |
| } else { | |
| if (!timespec_equal(&inode->i_atime, &now)) | |
| inode->i_atime = now; | |
| } | |
| } | |
| EXPORT_SYMBOL(update_atime); | |
| /** | |
| * inode_update_time - update mtime and ctime time | |
| * @inode: inode accessed | |
| * @ctime_too: update ctime too | |
| * | |
| * Update the mtime time on an inode and mark it for writeback. | |
| * When ctime_too is specified update the ctime too. | |
| */ | |
| void inode_update_time(struct inode *inode, int ctime_too) | |
| { | |
| struct timespec now; | |
| int sync_it = 0; | |
| if (IS_NOCMTIME(inode)) | |
| return; | |
| if (IS_RDONLY(inode)) | |
| return; | |
| now = current_fs_time(inode->i_sb); | |
| if (!timespec_equal(&inode->i_mtime, &now)) | |
| sync_it = 1; | |
| inode->i_mtime = now; | |
| if (ctime_too) { | |
| if (!timespec_equal(&inode->i_ctime, &now)) | |
| sync_it = 1; | |
| inode->i_ctime = now; | |
| } | |
| if (sync_it) | |
| mark_inode_dirty_sync(inode); | |
| } | |
| EXPORT_SYMBOL(inode_update_time); | |
| int inode_needs_sync(struct inode *inode) | |
| { | |
| if (IS_SYNC(inode)) | |
| return 1; | |
| if (S_ISDIR(inode->i_mode) && IS_DIRSYNC(inode)) | |
| return 1; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(inode_needs_sync); | |
| /* | |
| * Quota functions that want to walk the inode lists.. | |
| */ | |
| #ifdef CONFIG_QUOTA | |
| /* Function back in dquot.c */ | |
| int remove_inode_dquot_ref(struct inode *, int, struct list_head *); | |
| void remove_dquot_ref(struct super_block *sb, int type, | |
| struct list_head *tofree_head) | |
| { | |
| struct inode *inode; | |
| if (!sb->dq_op) | |
| return; /* nothing to do */ | |
| spin_lock(&inode_lock); /* This lock is for inodes code */ | |
| /* | |
| * We don't have to lock against quota code - test IS_QUOTAINIT is | |
| * just for speedup... | |
| */ | |
| list_for_each_entry(inode, &sb->s_inodes, i_sb_list) | |
| if (!IS_NOQUOTA(inode)) | |
| remove_inode_dquot_ref(inode, type, tofree_head); | |
| spin_unlock(&inode_lock); | |
| } | |
| #endif | |
| int inode_wait(void *word) | |
| { | |
| schedule(); | |
| return 0; | |
| } | |
| /* | |
| * If we try to find an inode in the inode hash while it is being deleted, we | |
| * have to wait until the filesystem completes its deletion before reporting | |
| * that it isn't found. This is because iget will immediately call | |
| * ->read_inode, and we want to be sure that evidence of the deletion is found | |
| * by ->read_inode. | |
| * This is called with inode_lock held. | |
| */ | |
| static void __wait_on_freeing_inode(struct inode *inode) | |
| { | |
| wait_queue_head_t *wq; | |
| DEFINE_WAIT_BIT(wait, &inode->i_state, __I_LOCK); | |
| /* | |
| * I_FREEING and I_CLEAR are cleared in process context under | |
| * inode_lock, so we have to give the tasks who would clear them | |
| * a chance to run and acquire inode_lock. | |
| */ | |
| if (!(inode->i_state & I_LOCK)) { | |
| spin_unlock(&inode_lock); | |
| yield(); | |
| spin_lock(&inode_lock); | |
| return; | |
| } | |
| wq = bit_waitqueue(&inode->i_state, __I_LOCK); | |
| prepare_to_wait(wq, &wait.wait, TASK_UNINTERRUPTIBLE); | |
| spin_unlock(&inode_lock); | |
| schedule(); | |
| finish_wait(wq, &wait.wait); | |
| spin_lock(&inode_lock); | |
| } | |
| void wake_up_inode(struct inode *inode) | |
| { | |
| /* | |
| * Prevent speculative execution through spin_unlock(&inode_lock); | |
| */ | |
| smp_mb(); | |
| wake_up_bit(&inode->i_state, __I_LOCK); | |
| } | |
| static __initdata unsigned long ihash_entries; | |
| static int __init set_ihash_entries(char *str) | |
| { | |
| if (!str) | |
| return 0; | |
| ihash_entries = simple_strtoul(str, &str, 0); | |
| return 1; | |
| } | |
| __setup("ihash_entries=", set_ihash_entries); | |
| /* | |
| * Initialize the waitqueues and inode hash table. | |
| */ | |
| void __init inode_init_early(void) | |
| { | |
| int loop; | |
| /* If hashes are distributed across NUMA nodes, defer | |
| * hash allocation until vmalloc space is available. | |
| */ | |
| if (hashdist) | |
| return; | |
| inode_hashtable = | |
| alloc_large_system_hash("Inode-cache", | |
| sizeof(struct hlist_head), | |
| ihash_entries, | |
| 14, | |
| HASH_EARLY, | |
| &i_hash_shift, | |
| &i_hash_mask, | |
| 0); | |
| for (loop = 0; loop < (1 << i_hash_shift); loop++) | |
| INIT_HLIST_HEAD(&inode_hashtable[loop]); | |
| } | |
| void __init inode_init(unsigned long mempages) | |
| { | |
| int loop; | |
| /* inode slab cache */ | |
| inode_cachep = kmem_cache_create("inode_cache", sizeof(struct inode), | |
| 0, SLAB_RECLAIM_ACCOUNT|SLAB_PANIC, init_once, NULL); | |
| set_shrinker(DEFAULT_SEEKS, shrink_icache_memory); | |
| /* Hash may have been set up in inode_init_early */ | |
| if (!hashdist) | |
| return; | |
| inode_hashtable = | |
| alloc_large_system_hash("Inode-cache", | |
| sizeof(struct hlist_head), | |
| ihash_entries, | |
| 14, | |
| 0, | |
| &i_hash_shift, | |
| &i_hash_mask, | |
| 0); | |
| for (loop = 0; loop < (1 << i_hash_shift); loop++) | |
| INIT_HLIST_HEAD(&inode_hashtable[loop]); | |
| } | |
| void init_special_inode(struct inode *inode, umode_t mode, dev_t rdev) | |
| { | |
| inode->i_mode = mode; | |
| if (S_ISCHR(mode)) { | |
| inode->i_fop = &def_chr_fops; | |
| inode->i_rdev = rdev; | |
| } else if (S_ISBLK(mode)) { | |
| inode->i_fop = &def_blk_fops; | |
| inode->i_rdev = rdev; | |
| } else if (S_ISFIFO(mode)) | |
| inode->i_fop = &def_fifo_fops; | |
| else if (S_ISSOCK(mode)) | |
| inode->i_fop = &bad_sock_fops; | |
| else | |
| printk(KERN_DEBUG "init_special_inode: bogus i_mode (%o)\n", | |
| mode); | |
| } | |
| EXPORT_SYMBOL(init_special_inode); |