| What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_sensing_mode |
| Date: August 2015 |
| KernelVersion: 4.2.0 |
| Contact: source@cogentembedded.com |
| Description: |
| Program sensor type for threshold detector inputs. |
| Could be either "GND-Open" or "Supply-Open" mode. Y is a |
| threshold detector input channel. Channels 0..7, 8..15, 16..23 |
| and 24..31 has common sensor types. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/events/in_voltageY_thresh_falling_value |
| Date: August 2015 |
| KernelVersion: 4.2.0 |
| Contact: source@cogentembedded.com |
| Description: |
| Channel Y low voltage threshold. If sensor input voltage goes lower then |
| this value then the threshold falling event is pushed. |
| Depending on in_voltageY_sensing_mode the low voltage threshold |
| is separately set for "GND-Open" and "Supply-Open" modes. |
| Channels 0..31 have common low threshold values, but could have different |
| sensing_modes. |
| The low voltage threshold range is between 2..21V. |
| Hysteresis between low and high thresholds can not be lower then 2 and |
| can not be odd. |
| If falling threshold results hysteresis to odd value then rising |
| threshold is automatically subtracted by one. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/events/in_voltageY_thresh_rising_value |
| Date: August 2015 |
| KernelVersion: 4.2.0 |
| Contact: source@cogentembedded.com |
| Description: |
| Channel Y high voltage threshold. If sensor input voltage goes higher then |
| this value then the threshold rising event is pushed. |
| Depending on in_voltageY_sensing_mode the high voltage threshold |
| is separately set for "GND-Open" and "Supply-Open" modes. |
| Channels 0..31 have common high threshold values, but could have different |
| sensing_modes. |
| The high voltage threshold range is between 3..22V. |
| Hysteresis between low and high thresholds can not be lower then 2 and |
| can not be odd. |
| If rising threshold results hysteresis to odd value then falling |
| threshold is automatically appended by one. |
