| /* | |
| * Copyright 2010 Tilera Corporation. All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation, version 2. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | |
| * NON INFRINGEMENT. See the GNU General Public License for | |
| * more details. | |
| * | |
| * TILE SMP support routines. | |
| */ | |
| #include <linux/smp.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/irq.h> | |
| #include <linux/irq_work.h> | |
| #include <linux/module.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/homecache.h> | |
| /* | |
| * We write to width and height with a single store in head_NN.S, | |
| * so make the variable aligned to "long". | |
| */ | |
| HV_Topology smp_topology __ro_after_init __aligned(sizeof(long)); | |
| EXPORT_SYMBOL(smp_topology); | |
| #if CHIP_HAS_IPI() | |
| static unsigned long __iomem *ipi_mappings[NR_CPUS]; | |
| #endif | |
| /* Does messaging work correctly to the local cpu? */ | |
| bool self_interrupt_ok; | |
| /* | |
| * Top-level send_IPI*() functions to send messages to other cpus. | |
| */ | |
| /* Set by smp_send_stop() to avoid recursive panics. */ | |
| static int stopping_cpus; | |
| static void __send_IPI_many(HV_Recipient *recip, int nrecip, int tag) | |
| { | |
| int sent = 0; | |
| while (sent < nrecip) { | |
| int rc = hv_send_message(recip, nrecip, | |
| (HV_VirtAddr)&tag, sizeof(tag)); | |
| if (rc < 0) { | |
| if (!stopping_cpus) /* avoid recursive panic */ | |
| panic("hv_send_message returned %d", rc); | |
| break; | |
| } | |
| WARN_ONCE(rc == 0, "hv_send_message() returned zero\n"); | |
| sent += rc; | |
| } | |
| } | |
| void send_IPI_single(int cpu, int tag) | |
| { | |
| HV_Recipient recip = { | |
| .y = cpu / smp_width, | |
| .x = cpu % smp_width, | |
| .state = HV_TO_BE_SENT | |
| }; | |
| __send_IPI_many(&recip, 1, tag); | |
| } | |
| void send_IPI_many(const struct cpumask *mask, int tag) | |
| { | |
| HV_Recipient recip[NR_CPUS]; | |
| int cpu; | |
| int nrecip = 0; | |
| int my_cpu = smp_processor_id(); | |
| for_each_cpu(cpu, mask) { | |
| HV_Recipient *r; | |
| BUG_ON(cpu == my_cpu); | |
| r = &recip[nrecip++]; | |
| r->y = cpu / smp_width; | |
| r->x = cpu % smp_width; | |
| r->state = HV_TO_BE_SENT; | |
| } | |
| __send_IPI_many(recip, nrecip, tag); | |
| } | |
| void send_IPI_allbutself(int tag) | |
| { | |
| struct cpumask mask; | |
| cpumask_copy(&mask, cpu_online_mask); | |
| cpumask_clear_cpu(smp_processor_id(), &mask); | |
| send_IPI_many(&mask, tag); | |
| } | |
| /* | |
| * Functions related to starting/stopping cpus. | |
| */ | |
| /* Handler to start the current cpu. */ | |
| static void smp_start_cpu_interrupt(void) | |
| { | |
| get_irq_regs()->pc = start_cpu_function_addr; | |
| } | |
| /* Handler to stop the current cpu. */ | |
| static void smp_stop_cpu_interrupt(void) | |
| { | |
| arch_local_irq_disable_all(); | |
| set_cpu_online(smp_processor_id(), 0); | |
| for (;;) | |
| asm("nap; nop"); | |
| } | |
| /* This function calls the 'stop' function on all other CPUs in the system. */ | |
| void smp_send_stop(void) | |
| { | |
| stopping_cpus = 1; | |
| send_IPI_allbutself(MSG_TAG_STOP_CPU); | |
| } | |
| /* On panic, just wait; we may get an smp_send_stop() later on. */ | |
| void panic_smp_self_stop(void) | |
| { | |
| while (1) | |
| asm("nap; nop"); | |
| } | |
| /* | |
| * Dispatch code called from hv_message_intr() for HV_MSG_TILE hv messages. | |
| */ | |
| void evaluate_message(int tag) | |
| { | |
| switch (tag) { | |
| case MSG_TAG_START_CPU: /* Start up a cpu */ | |
| smp_start_cpu_interrupt(); | |
| break; | |
| case MSG_TAG_STOP_CPU: /* Sent to shut down slave CPU's */ | |
| smp_stop_cpu_interrupt(); | |
| break; | |
| case MSG_TAG_CALL_FUNCTION_MANY: /* Call function on cpumask */ | |
| generic_smp_call_function_interrupt(); | |
| break; | |
| case MSG_TAG_CALL_FUNCTION_SINGLE: /* Call function on one other CPU */ | |
| generic_smp_call_function_single_interrupt(); | |
| break; | |
| case MSG_TAG_IRQ_WORK: /* Invoke IRQ work */ | |
| irq_work_run(); | |
| break; | |
| default: | |
| panic("Unknown IPI message tag %d", tag); | |
| break; | |
| } | |
| } | |
| /* | |
| * flush_icache_range() code uses smp_call_function(). | |
| */ | |
| struct ipi_flush { | |
| unsigned long start; | |
| unsigned long end; | |
| }; | |
| static void ipi_flush_icache_range(void *info) | |
| { | |
| struct ipi_flush *flush = (struct ipi_flush *) info; | |
| __flush_icache_range(flush->start, flush->end); | |
| } | |
| void flush_icache_range(unsigned long start, unsigned long end) | |
| { | |
| struct ipi_flush flush = { start, end }; | |
| /* If invoked with irqs disabled, we can not issue IPIs. */ | |
| if (irqs_disabled()) | |
| flush_remote(0, HV_FLUSH_EVICT_L1I, NULL, 0, 0, 0, | |
| NULL, NULL, 0); | |
| else { | |
| preempt_disable(); | |
| on_each_cpu(ipi_flush_icache_range, &flush, 1); | |
| preempt_enable(); | |
| } | |
| } | |
| EXPORT_SYMBOL(flush_icache_range); | |
| #ifdef CONFIG_IRQ_WORK | |
| void arch_irq_work_raise(void) | |
| { | |
| if (arch_irq_work_has_interrupt()) | |
| send_IPI_single(smp_processor_id(), MSG_TAG_IRQ_WORK); | |
| } | |
| #endif | |
| /* Called when smp_send_reschedule() triggers IRQ_RESCHEDULE. */ | |
| static irqreturn_t handle_reschedule_ipi(int irq, void *token) | |
| { | |
| __this_cpu_inc(irq_stat.irq_resched_count); | |
| scheduler_ipi(); | |
| return IRQ_HANDLED; | |
| } | |
| static struct irqaction resched_action = { | |
| .handler = handle_reschedule_ipi, | |
| .name = "resched", | |
| .dev_id = handle_reschedule_ipi /* unique token */, | |
| }; | |
| void __init ipi_init(void) | |
| { | |
| int cpu = smp_processor_id(); | |
| HV_Recipient recip = { .y = cpu_y(cpu), .x = cpu_x(cpu), | |
| .state = HV_TO_BE_SENT }; | |
| int tag = MSG_TAG_CALL_FUNCTION_SINGLE; | |
| /* | |
| * Test if we can message ourselves for arch_irq_work_raise. | |
| * This functionality is only available in the Tilera hypervisor | |
| * in versions 4.3.4 and following. | |
| */ | |
| if (hv_send_message(&recip, 1, (HV_VirtAddr)&tag, sizeof(tag)) == 1) | |
| self_interrupt_ok = true; | |
| else | |
| pr_warn("Older hypervisor: disabling fast irq_work_raise\n"); | |
| #if CHIP_HAS_IPI() | |
| /* Map IPI trigger MMIO addresses. */ | |
| for_each_possible_cpu(cpu) { | |
| HV_Coord tile; | |
| HV_PTE pte; | |
| unsigned long offset; | |
| tile.x = cpu_x(cpu); | |
| tile.y = cpu_y(cpu); | |
| if (hv_get_ipi_pte(tile, KERNEL_PL, &pte) != 0) | |
| panic("Failed to initialize IPI for cpu %d\n", cpu); | |
| offset = PFN_PHYS(pte_pfn(pte)); | |
| ipi_mappings[cpu] = ioremap_prot(offset, PAGE_SIZE, pte); | |
| } | |
| #endif | |
| /* Bind handle_reschedule_ipi() to IRQ_RESCHEDULE. */ | |
| tile_irq_activate(IRQ_RESCHEDULE, TILE_IRQ_PERCPU); | |
| BUG_ON(setup_irq(IRQ_RESCHEDULE, &resched_action)); | |
| } | |
| #if CHIP_HAS_IPI() | |
| void smp_send_reschedule(int cpu) | |
| { | |
| WARN_ON(cpu_is_offline(cpu)); | |
| /* | |
| * We just want to do an MMIO store. The traditional writeq() | |
| * functions aren't really correct here, since they're always | |
| * directed at the PCI shim. For now, just do a raw store, | |
| * casting away the __iomem attribute. | |
| */ | |
| ((unsigned long __force *)ipi_mappings[cpu])[IRQ_RESCHEDULE] = 0; | |
| } | |
| #else | |
| void smp_send_reschedule(int cpu) | |
| { | |
| HV_Coord coord; | |
| WARN_ON(cpu_is_offline(cpu)); | |
| coord.y = cpu_y(cpu); | |
| coord.x = cpu_x(cpu); | |
| hv_trigger_ipi(coord, IRQ_RESCHEDULE); | |
| } | |
| #endif /* CHIP_HAS_IPI() */ |