| /* | |
| * Routines having to do with the 'struct sk_buff' memory handlers. | |
| * | |
| * Authors: Alan Cox <iiitac@pyr.swan.ac.uk> | |
| * Florian La Roche <rzsfl@rz.uni-sb.de> | |
| * | |
| * Fixes: | |
| * Alan Cox : Fixed the worst of the load | |
| * balancer bugs. | |
| * Dave Platt : Interrupt stacking fix. | |
| * Richard Kooijman : Timestamp fixes. | |
| * Alan Cox : Changed buffer format. | |
| * Alan Cox : destructor hook for AF_UNIX etc. | |
| * Linus Torvalds : Better skb_clone. | |
| * Alan Cox : Added skb_copy. | |
| * Alan Cox : Added all the changed routines Linus | |
| * only put in the headers | |
| * Ray VanTassle : Fixed --skb->lock in free | |
| * Alan Cox : skb_copy copy arp field | |
| * Andi Kleen : slabified it. | |
| * Robert Olsson : Removed skb_head_pool | |
| * | |
| * NOTE: | |
| * The __skb_ routines should be called with interrupts | |
| * disabled, or you better be *real* sure that the operation is atomic | |
| * with respect to whatever list is being frobbed (e.g. via lock_sock() | |
| * or via disabling bottom half handlers, etc). | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| /* | |
| * The functions in this file will not compile correctly with gcc 2.4.x | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/in.h> | |
| #include <linux/inet.h> | |
| #include <linux/slab.h> | |
| #include <linux/netdevice.h> | |
| #ifdef CONFIG_NET_CLS_ACT | |
| #include <net/pkt_sched.h> | |
| #endif | |
| #include <linux/string.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/splice.h> | |
| #include <linux/cache.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/init.h> | |
| #include <linux/scatterlist.h> | |
| #include <net/protocol.h> | |
| #include <net/dst.h> | |
| #include <net/sock.h> | |
| #include <net/checksum.h> | |
| #include <net/xfrm.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/system.h> | |
| #include "kmap_skb.h" | |
| static struct kmem_cache *skbuff_head_cache __read_mostly; | |
| static struct kmem_cache *skbuff_fclone_cache __read_mostly; | |
| static void sock_pipe_buf_release(struct pipe_inode_info *pipe, | |
| struct pipe_buffer *buf) | |
| { | |
| struct sk_buff *skb = (struct sk_buff *) buf->private; | |
| kfree_skb(skb); | |
| } | |
| static void sock_pipe_buf_get(struct pipe_inode_info *pipe, | |
| struct pipe_buffer *buf) | |
| { | |
| struct sk_buff *skb = (struct sk_buff *) buf->private; | |
| skb_get(skb); | |
| } | |
| static int sock_pipe_buf_steal(struct pipe_inode_info *pipe, | |
| struct pipe_buffer *buf) | |
| { | |
| return 1; | |
| } | |
| /* Pipe buffer operations for a socket. */ | |
| static struct pipe_buf_operations sock_pipe_buf_ops = { | |
| .can_merge = 0, | |
| .map = generic_pipe_buf_map, | |
| .unmap = generic_pipe_buf_unmap, | |
| .confirm = generic_pipe_buf_confirm, | |
| .release = sock_pipe_buf_release, | |
| .steal = sock_pipe_buf_steal, | |
| .get = sock_pipe_buf_get, | |
| }; | |
| /* | |
| * Keep out-of-line to prevent kernel bloat. | |
| * __builtin_return_address is not used because it is not always | |
| * reliable. | |
| */ | |
| /** | |
| * skb_over_panic - private function | |
| * @skb: buffer | |
| * @sz: size | |
| * @here: address | |
| * | |
| * Out of line support code for skb_put(). Not user callable. | |
| */ | |
| void skb_over_panic(struct sk_buff *skb, int sz, void *here) | |
| { | |
| printk(KERN_EMERG "skb_over_panic: text:%p len:%d put:%d head:%p " | |
| "data:%p tail:%#lx end:%#lx dev:%s\n", | |
| here, skb->len, sz, skb->head, skb->data, | |
| (unsigned long)skb->tail, (unsigned long)skb->end, | |
| skb->dev ? skb->dev->name : "<NULL>"); | |
| BUG(); | |
| } | |
| /** | |
| * skb_under_panic - private function | |
| * @skb: buffer | |
| * @sz: size | |
| * @here: address | |
| * | |
| * Out of line support code for skb_push(). Not user callable. | |
| */ | |
| void skb_under_panic(struct sk_buff *skb, int sz, void *here) | |
| { | |
| printk(KERN_EMERG "skb_under_panic: text:%p len:%d put:%d head:%p " | |
| "data:%p tail:%#lx end:%#lx dev:%s\n", | |
| here, skb->len, sz, skb->head, skb->data, | |
| (unsigned long)skb->tail, (unsigned long)skb->end, | |
| skb->dev ? skb->dev->name : "<NULL>"); | |
| BUG(); | |
| } | |
| void skb_truesize_bug(struct sk_buff *skb) | |
| { | |
| printk(KERN_ERR "SKB BUG: Invalid truesize (%u) " | |
| "len=%u, sizeof(sk_buff)=%Zd\n", | |
| skb->truesize, skb->len, sizeof(struct sk_buff)); | |
| } | |
| EXPORT_SYMBOL(skb_truesize_bug); | |
| /* Allocate a new skbuff. We do this ourselves so we can fill in a few | |
| * 'private' fields and also do memory statistics to find all the | |
| * [BEEP] leaks. | |
| * | |
| */ | |
| /** | |
| * __alloc_skb - allocate a network buffer | |
| * @size: size to allocate | |
| * @gfp_mask: allocation mask | |
| * @fclone: allocate from fclone cache instead of head cache | |
| * and allocate a cloned (child) skb | |
| * @node: numa node to allocate memory on | |
| * | |
| * Allocate a new &sk_buff. The returned buffer has no headroom and a | |
| * tail room of size bytes. The object has a reference count of one. | |
| * The return is the buffer. On a failure the return is %NULL. | |
| * | |
| * Buffers may only be allocated from interrupts using a @gfp_mask of | |
| * %GFP_ATOMIC. | |
| */ | |
| struct sk_buff *__alloc_skb(unsigned int size, gfp_t gfp_mask, | |
| int fclone, int node) | |
| { | |
| struct kmem_cache *cache; | |
| struct skb_shared_info *shinfo; | |
| struct sk_buff *skb; | |
| u8 *data; | |
| cache = fclone ? skbuff_fclone_cache : skbuff_head_cache; | |
| /* Get the HEAD */ | |
| skb = kmem_cache_alloc_node(cache, gfp_mask & ~__GFP_DMA, node); | |
| if (!skb) | |
| goto out; | |
| size = SKB_DATA_ALIGN(size); | |
| data = kmalloc_node_track_caller(size + sizeof(struct skb_shared_info), | |
| gfp_mask, node); | |
| if (!data) | |
| goto nodata; | |
| /* | |
| * Only clear those fields we need to clear, not those that we will | |
| * actually initialise below. Hence, don't put any more fields after | |
| * the tail pointer in struct sk_buff! | |
| */ | |
| memset(skb, 0, offsetof(struct sk_buff, tail)); | |
| skb->truesize = size + sizeof(struct sk_buff); | |
| atomic_set(&skb->users, 1); | |
| skb->head = data; | |
| skb->data = data; | |
| skb_reset_tail_pointer(skb); | |
| skb->end = skb->tail + size; | |
| /* make sure we initialize shinfo sequentially */ | |
| shinfo = skb_shinfo(skb); | |
| atomic_set(&shinfo->dataref, 1); | |
| shinfo->nr_frags = 0; | |
| shinfo->gso_size = 0; | |
| shinfo->gso_segs = 0; | |
| shinfo->gso_type = 0; | |
| shinfo->ip6_frag_id = 0; | |
| shinfo->frag_list = NULL; | |
| if (fclone) { | |
| struct sk_buff *child = skb + 1; | |
| atomic_t *fclone_ref = (atomic_t *) (child + 1); | |
| skb->fclone = SKB_FCLONE_ORIG; | |
| atomic_set(fclone_ref, 1); | |
| child->fclone = SKB_FCLONE_UNAVAILABLE; | |
| } | |
| out: | |
| return skb; | |
| nodata: | |
| kmem_cache_free(cache, skb); | |
| skb = NULL; | |
| goto out; | |
| } | |
| /** | |
| * __netdev_alloc_skb - allocate an skbuff for rx on a specific device | |
| * @dev: network device to receive on | |
| * @length: length to allocate | |
| * @gfp_mask: get_free_pages mask, passed to alloc_skb | |
| * | |
| * Allocate a new &sk_buff and assign it a usage count of one. The | |
| * buffer has unspecified headroom built in. Users should allocate | |
| * the headroom they think they need without accounting for the | |
| * built in space. The built in space is used for optimisations. | |
| * | |
| * %NULL is returned if there is no free memory. | |
| */ | |
| struct sk_buff *__netdev_alloc_skb(struct net_device *dev, | |
| unsigned int length, gfp_t gfp_mask) | |
| { | |
| int node = dev->dev.parent ? dev_to_node(dev->dev.parent) : -1; | |
| struct sk_buff *skb; | |
| skb = __alloc_skb(length + NET_SKB_PAD, gfp_mask, 0, node); | |
| if (likely(skb)) { | |
| skb_reserve(skb, NET_SKB_PAD); | |
| skb->dev = dev; | |
| } | |
| return skb; | |
| } | |
| /** | |
| * dev_alloc_skb - allocate an skbuff for receiving | |
| * @length: length to allocate | |
| * | |
| * Allocate a new &sk_buff and assign it a usage count of one. The | |
| * buffer has unspecified headroom built in. Users should allocate | |
| * the headroom they think they need without accounting for the | |
| * built in space. The built in space is used for optimisations. | |
| * | |
| * %NULL is returned if there is no free memory. Although this function | |
| * allocates memory it can be called from an interrupt. | |
| */ | |
| struct sk_buff *dev_alloc_skb(unsigned int length) | |
| { | |
| /* | |
| * There is more code here than it seems: | |
| * __dev_alloc_skb is an inline | |
| */ | |
| return __dev_alloc_skb(length, GFP_ATOMIC); | |
| } | |
| EXPORT_SYMBOL(dev_alloc_skb); | |
| static void skb_drop_list(struct sk_buff **listp) | |
| { | |
| struct sk_buff *list = *listp; | |
| *listp = NULL; | |
| do { | |
| struct sk_buff *this = list; | |
| list = list->next; | |
| kfree_skb(this); | |
| } while (list); | |
| } | |
| static inline void skb_drop_fraglist(struct sk_buff *skb) | |
| { | |
| skb_drop_list(&skb_shinfo(skb)->frag_list); | |
| } | |
| static void skb_clone_fraglist(struct sk_buff *skb) | |
| { | |
| struct sk_buff *list; | |
| for (list = skb_shinfo(skb)->frag_list; list; list = list->next) | |
| skb_get(list); | |
| } | |
| static void skb_release_data(struct sk_buff *skb) | |
| { | |
| if (!skb->cloned || | |
| !atomic_sub_return(skb->nohdr ? (1 << SKB_DATAREF_SHIFT) + 1 : 1, | |
| &skb_shinfo(skb)->dataref)) { | |
| if (skb_shinfo(skb)->nr_frags) { | |
| int i; | |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) | |
| put_page(skb_shinfo(skb)->frags[i].page); | |
| } | |
| if (skb_shinfo(skb)->frag_list) | |
| skb_drop_fraglist(skb); | |
| kfree(skb->head); | |
| } | |
| } | |
| /* | |
| * Free an skbuff by memory without cleaning the state. | |
| */ | |
| static void kfree_skbmem(struct sk_buff *skb) | |
| { | |
| struct sk_buff *other; | |
| atomic_t *fclone_ref; | |
| switch (skb->fclone) { | |
| case SKB_FCLONE_UNAVAILABLE: | |
| kmem_cache_free(skbuff_head_cache, skb); | |
| break; | |
| case SKB_FCLONE_ORIG: | |
| fclone_ref = (atomic_t *) (skb + 2); | |
| if (atomic_dec_and_test(fclone_ref)) | |
| kmem_cache_free(skbuff_fclone_cache, skb); | |
| break; | |
| case SKB_FCLONE_CLONE: | |
| fclone_ref = (atomic_t *) (skb + 1); | |
| other = skb - 1; | |
| /* The clone portion is available for | |
| * fast-cloning again. | |
| */ | |
| skb->fclone = SKB_FCLONE_UNAVAILABLE; | |
| if (atomic_dec_and_test(fclone_ref)) | |
| kmem_cache_free(skbuff_fclone_cache, other); | |
| break; | |
| } | |
| } | |
| /* Free everything but the sk_buff shell. */ | |
| static void skb_release_all(struct sk_buff *skb) | |
| { | |
| dst_release(skb->dst); | |
| #ifdef CONFIG_XFRM | |
| secpath_put(skb->sp); | |
| #endif | |
| if (skb->destructor) { | |
| WARN_ON(in_irq()); | |
| skb->destructor(skb); | |
| } | |
| #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) | |
| nf_conntrack_put(skb->nfct); | |
| nf_conntrack_put_reasm(skb->nfct_reasm); | |
| #endif | |
| #ifdef CONFIG_BRIDGE_NETFILTER | |
| nf_bridge_put(skb->nf_bridge); | |
| #endif | |
| /* XXX: IS this still necessary? - JHS */ | |
| #ifdef CONFIG_NET_SCHED | |
| skb->tc_index = 0; | |
| #ifdef CONFIG_NET_CLS_ACT | |
| skb->tc_verd = 0; | |
| #endif | |
| #endif | |
| skb_release_data(skb); | |
| } | |
| /** | |
| * __kfree_skb - private function | |
| * @skb: buffer | |
| * | |
| * Free an sk_buff. Release anything attached to the buffer. | |
| * Clean the state. This is an internal helper function. Users should | |
| * always call kfree_skb | |
| */ | |
| void __kfree_skb(struct sk_buff *skb) | |
| { | |
| skb_release_all(skb); | |
| kfree_skbmem(skb); | |
| } | |
| /** | |
| * kfree_skb - free an sk_buff | |
| * @skb: buffer to free | |
| * | |
| * Drop a reference to the buffer and free it if the usage count has | |
| * hit zero. | |
| */ | |
| void kfree_skb(struct sk_buff *skb) | |
| { | |
| if (unlikely(!skb)) | |
| return; | |
| if (likely(atomic_read(&skb->users) == 1)) | |
| smp_rmb(); | |
| else if (likely(!atomic_dec_and_test(&skb->users))) | |
| return; | |
| __kfree_skb(skb); | |
| } | |
| static void __copy_skb_header(struct sk_buff *new, const struct sk_buff *old) | |
| { | |
| new->tstamp = old->tstamp; | |
| new->dev = old->dev; | |
| new->transport_header = old->transport_header; | |
| new->network_header = old->network_header; | |
| new->mac_header = old->mac_header; | |
| new->dst = dst_clone(old->dst); | |
| #ifdef CONFIG_INET | |
| new->sp = secpath_get(old->sp); | |
| #endif | |
| memcpy(new->cb, old->cb, sizeof(old->cb)); | |
| new->csum_start = old->csum_start; | |
| new->csum_offset = old->csum_offset; | |
| new->local_df = old->local_df; | |
| new->pkt_type = old->pkt_type; | |
| new->ip_summed = old->ip_summed; | |
| skb_copy_queue_mapping(new, old); | |
| new->priority = old->priority; | |
| #if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE) | |
| new->ipvs_property = old->ipvs_property; | |
| #endif | |
| new->protocol = old->protocol; | |
| new->mark = old->mark; | |
| __nf_copy(new, old); | |
| #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \ | |
| defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE) | |
| new->nf_trace = old->nf_trace; | |
| #endif | |
| #ifdef CONFIG_NET_SCHED | |
| new->tc_index = old->tc_index; | |
| #ifdef CONFIG_NET_CLS_ACT | |
| new->tc_verd = old->tc_verd; | |
| #endif | |
| #endif | |
| skb_copy_secmark(new, old); | |
| } | |
| static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb) | |
| { | |
| #define C(x) n->x = skb->x | |
| n->next = n->prev = NULL; | |
| n->sk = NULL; | |
| __copy_skb_header(n, skb); | |
| C(len); | |
| C(data_len); | |
| C(mac_len); | |
| n->hdr_len = skb->nohdr ? skb_headroom(skb) : skb->hdr_len; | |
| n->cloned = 1; | |
| n->nohdr = 0; | |
| n->destructor = NULL; | |
| C(iif); | |
| C(tail); | |
| C(end); | |
| C(head); | |
| C(data); | |
| C(truesize); | |
| atomic_set(&n->users, 1); | |
| atomic_inc(&(skb_shinfo(skb)->dataref)); | |
| skb->cloned = 1; | |
| return n; | |
| #undef C | |
| } | |
| /** | |
| * skb_morph - morph one skb into another | |
| * @dst: the skb to receive the contents | |
| * @src: the skb to supply the contents | |
| * | |
| * This is identical to skb_clone except that the target skb is | |
| * supplied by the user. | |
| * | |
| * The target skb is returned upon exit. | |
| */ | |
| struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src) | |
| { | |
| skb_release_all(dst); | |
| return __skb_clone(dst, src); | |
| } | |
| EXPORT_SYMBOL_GPL(skb_morph); | |
| /** | |
| * skb_clone - duplicate an sk_buff | |
| * @skb: buffer to clone | |
| * @gfp_mask: allocation priority | |
| * | |
| * Duplicate an &sk_buff. The new one is not owned by a socket. Both | |
| * copies share the same packet data but not structure. The new | |
| * buffer has a reference count of 1. If the allocation fails the | |
| * function returns %NULL otherwise the new buffer is returned. | |
| * | |
| * If this function is called from an interrupt gfp_mask() must be | |
| * %GFP_ATOMIC. | |
| */ | |
| struct sk_buff *skb_clone(struct sk_buff *skb, gfp_t gfp_mask) | |
| { | |
| struct sk_buff *n; | |
| n = skb + 1; | |
| if (skb->fclone == SKB_FCLONE_ORIG && | |
| n->fclone == SKB_FCLONE_UNAVAILABLE) { | |
| atomic_t *fclone_ref = (atomic_t *) (n + 1); | |
| n->fclone = SKB_FCLONE_CLONE; | |
| atomic_inc(fclone_ref); | |
| } else { | |
| n = kmem_cache_alloc(skbuff_head_cache, gfp_mask); | |
| if (!n) | |
| return NULL; | |
| n->fclone = SKB_FCLONE_UNAVAILABLE; | |
| } | |
| return __skb_clone(n, skb); | |
| } | |
| static void copy_skb_header(struct sk_buff *new, const struct sk_buff *old) | |
| { | |
| #ifndef NET_SKBUFF_DATA_USES_OFFSET | |
| /* | |
| * Shift between the two data areas in bytes | |
| */ | |
| unsigned long offset = new->data - old->data; | |
| #endif | |
| __copy_skb_header(new, old); | |
| #ifndef NET_SKBUFF_DATA_USES_OFFSET | |
| /* {transport,network,mac}_header are relative to skb->head */ | |
| new->transport_header += offset; | |
| new->network_header += offset; | |
| new->mac_header += offset; | |
| #endif | |
| skb_shinfo(new)->gso_size = skb_shinfo(old)->gso_size; | |
| skb_shinfo(new)->gso_segs = skb_shinfo(old)->gso_segs; | |
| skb_shinfo(new)->gso_type = skb_shinfo(old)->gso_type; | |
| } | |
| /** | |
| * skb_copy - create private copy of an sk_buff | |
| * @skb: buffer to copy | |
| * @gfp_mask: allocation priority | |
| * | |
| * Make a copy of both an &sk_buff and its data. This is used when the | |
| * caller wishes to modify the data and needs a private copy of the | |
| * data to alter. Returns %NULL on failure or the pointer to the buffer | |
| * on success. The returned buffer has a reference count of 1. | |
| * | |
| * As by-product this function converts non-linear &sk_buff to linear | |
| * one, so that &sk_buff becomes completely private and caller is allowed | |
| * to modify all the data of returned buffer. This means that this | |
| * function is not recommended for use in circumstances when only | |
| * header is going to be modified. Use pskb_copy() instead. | |
| */ | |
| struct sk_buff *skb_copy(const struct sk_buff *skb, gfp_t gfp_mask) | |
| { | |
| int headerlen = skb->data - skb->head; | |
| /* | |
| * Allocate the copy buffer | |
| */ | |
| struct sk_buff *n; | |
| #ifdef NET_SKBUFF_DATA_USES_OFFSET | |
| n = alloc_skb(skb->end + skb->data_len, gfp_mask); | |
| #else | |
| n = alloc_skb(skb->end - skb->head + skb->data_len, gfp_mask); | |
| #endif | |
| if (!n) | |
| return NULL; | |
| /* Set the data pointer */ | |
| skb_reserve(n, headerlen); | |
| /* Set the tail pointer and length */ | |
| skb_put(n, skb->len); | |
| if (skb_copy_bits(skb, -headerlen, n->head, headerlen + skb->len)) | |
| BUG(); | |
| copy_skb_header(n, skb); | |
| return n; | |
| } | |
| /** | |
| * pskb_copy - create copy of an sk_buff with private head. | |
| * @skb: buffer to copy | |
| * @gfp_mask: allocation priority | |
| * | |
| * Make a copy of both an &sk_buff and part of its data, located | |
| * in header. Fragmented data remain shared. This is used when | |
| * the caller wishes to modify only header of &sk_buff and needs | |
| * private copy of the header to alter. Returns %NULL on failure | |
| * or the pointer to the buffer on success. | |
| * The returned buffer has a reference count of 1. | |
| */ | |
| struct sk_buff *pskb_copy(struct sk_buff *skb, gfp_t gfp_mask) | |
| { | |
| /* | |
| * Allocate the copy buffer | |
| */ | |
| struct sk_buff *n; | |
| #ifdef NET_SKBUFF_DATA_USES_OFFSET | |
| n = alloc_skb(skb->end, gfp_mask); | |
| #else | |
| n = alloc_skb(skb->end - skb->head, gfp_mask); | |
| #endif | |
| if (!n) | |
| goto out; | |
| /* Set the data pointer */ | |
| skb_reserve(n, skb->data - skb->head); | |
| /* Set the tail pointer and length */ | |
| skb_put(n, skb_headlen(skb)); | |
| /* Copy the bytes */ | |
| skb_copy_from_linear_data(skb, n->data, n->len); | |
| n->truesize += skb->data_len; | |
| n->data_len = skb->data_len; | |
| n->len = skb->len; | |
| if (skb_shinfo(skb)->nr_frags) { | |
| int i; | |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | |
| skb_shinfo(n)->frags[i] = skb_shinfo(skb)->frags[i]; | |
| get_page(skb_shinfo(n)->frags[i].page); | |
| } | |
| skb_shinfo(n)->nr_frags = i; | |
| } | |
| if (skb_shinfo(skb)->frag_list) { | |
| skb_shinfo(n)->frag_list = skb_shinfo(skb)->frag_list; | |
| skb_clone_fraglist(n); | |
| } | |
| copy_skb_header(n, skb); | |
| out: | |
| return n; | |
| } | |
| /** | |
| * pskb_expand_head - reallocate header of &sk_buff | |
| * @skb: buffer to reallocate | |
| * @nhead: room to add at head | |
| * @ntail: room to add at tail | |
| * @gfp_mask: allocation priority | |
| * | |
| * Expands (or creates identical copy, if &nhead and &ntail are zero) | |
| * header of skb. &sk_buff itself is not changed. &sk_buff MUST have | |
| * reference count of 1. Returns zero in the case of success or error, | |
| * if expansion failed. In the last case, &sk_buff is not changed. | |
| * | |
| * All the pointers pointing into skb header may change and must be | |
| * reloaded after call to this function. | |
| */ | |
| int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail, | |
| gfp_t gfp_mask) | |
| { | |
| int i; | |
| u8 *data; | |
| #ifdef NET_SKBUFF_DATA_USES_OFFSET | |
| int size = nhead + skb->end + ntail; | |
| #else | |
| int size = nhead + (skb->end - skb->head) + ntail; | |
| #endif | |
| long off; | |
| if (skb_shared(skb)) | |
| BUG(); | |
| size = SKB_DATA_ALIGN(size); | |
| data = kmalloc(size + sizeof(struct skb_shared_info), gfp_mask); | |
| if (!data) | |
| goto nodata; | |
| /* Copy only real data... and, alas, header. This should be | |
| * optimized for the cases when header is void. */ | |
| #ifdef NET_SKBUFF_DATA_USES_OFFSET | |
| memcpy(data + nhead, skb->head, skb->tail); | |
| #else | |
| memcpy(data + nhead, skb->head, skb->tail - skb->head); | |
| #endif | |
| memcpy(data + size, skb_end_pointer(skb), | |
| sizeof(struct skb_shared_info)); | |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) | |
| get_page(skb_shinfo(skb)->frags[i].page); | |
| if (skb_shinfo(skb)->frag_list) | |
| skb_clone_fraglist(skb); | |
| skb_release_data(skb); | |
| off = (data + nhead) - skb->head; | |
| skb->head = data; | |
| skb->data += off; | |
| #ifdef NET_SKBUFF_DATA_USES_OFFSET | |
| skb->end = size; | |
| off = nhead; | |
| #else | |
| skb->end = skb->head + size; | |
| #endif | |
| /* {transport,network,mac}_header and tail are relative to skb->head */ | |
| skb->tail += off; | |
| skb->transport_header += off; | |
| skb->network_header += off; | |
| skb->mac_header += off; | |
| skb->csum_start += nhead; | |
| skb->cloned = 0; | |
| skb->hdr_len = 0; | |
| skb->nohdr = 0; | |
| atomic_set(&skb_shinfo(skb)->dataref, 1); | |
| return 0; | |
| nodata: | |
| return -ENOMEM; | |
| } | |
| /* Make private copy of skb with writable head and some headroom */ | |
| struct sk_buff *skb_realloc_headroom(struct sk_buff *skb, unsigned int headroom) | |
| { | |
| struct sk_buff *skb2; | |
| int delta = headroom - skb_headroom(skb); | |
| if (delta <= 0) | |
| skb2 = pskb_copy(skb, GFP_ATOMIC); | |
| else { | |
| skb2 = skb_clone(skb, GFP_ATOMIC); | |
| if (skb2 && pskb_expand_head(skb2, SKB_DATA_ALIGN(delta), 0, | |
| GFP_ATOMIC)) { | |
| kfree_skb(skb2); | |
| skb2 = NULL; | |
| } | |
| } | |
| return skb2; | |
| } | |
| /** | |
| * skb_copy_expand - copy and expand sk_buff | |
| * @skb: buffer to copy | |
| * @newheadroom: new free bytes at head | |
| * @newtailroom: new free bytes at tail | |
| * @gfp_mask: allocation priority | |
| * | |
| * Make a copy of both an &sk_buff and its data and while doing so | |
| * allocate additional space. | |
| * | |
| * This is used when the caller wishes to modify the data and needs a | |
| * private copy of the data to alter as well as more space for new fields. | |
| * Returns %NULL on failure or the pointer to the buffer | |
| * on success. The returned buffer has a reference count of 1. | |
| * | |
| * You must pass %GFP_ATOMIC as the allocation priority if this function | |
| * is called from an interrupt. | |
| */ | |
| struct sk_buff *skb_copy_expand(const struct sk_buff *skb, | |
| int newheadroom, int newtailroom, | |
| gfp_t gfp_mask) | |
| { | |
| /* | |
| * Allocate the copy buffer | |
| */ | |
| struct sk_buff *n = alloc_skb(newheadroom + skb->len + newtailroom, | |
| gfp_mask); | |
| int oldheadroom = skb_headroom(skb); | |
| int head_copy_len, head_copy_off; | |
| int off; | |
| if (!n) | |
| return NULL; | |
| skb_reserve(n, newheadroom); | |
| /* Set the tail pointer and length */ | |
| skb_put(n, skb->len); | |
| head_copy_len = oldheadroom; | |
| head_copy_off = 0; | |
| if (newheadroom <= head_copy_len) | |
| head_copy_len = newheadroom; | |
| else | |
| head_copy_off = newheadroom - head_copy_len; | |
| /* Copy the linear header and data. */ | |
| if (skb_copy_bits(skb, -head_copy_len, n->head + head_copy_off, | |
| skb->len + head_copy_len)) | |
| BUG(); | |
| copy_skb_header(n, skb); | |
| off = newheadroom - oldheadroom; | |
| n->csum_start += off; | |
| #ifdef NET_SKBUFF_DATA_USES_OFFSET | |
| n->transport_header += off; | |
| n->network_header += off; | |
| n->mac_header += off; | |
| #endif | |
| return n; | |
| } | |
| /** | |
| * skb_pad - zero pad the tail of an skb | |
| * @skb: buffer to pad | |
| * @pad: space to pad | |
| * | |
| * Ensure that a buffer is followed by a padding area that is zero | |
| * filled. Used by network drivers which may DMA or transfer data | |
| * beyond the buffer end onto the wire. | |
| * | |
| * May return error in out of memory cases. The skb is freed on error. | |
| */ | |
| int skb_pad(struct sk_buff *skb, int pad) | |
| { | |
| int err; | |
| int ntail; | |
| /* If the skbuff is non linear tailroom is always zero.. */ | |
| if (!skb_cloned(skb) && skb_tailroom(skb) >= pad) { | |
| memset(skb->data+skb->len, 0, pad); | |
| return 0; | |
| } | |
| ntail = skb->data_len + pad - (skb->end - skb->tail); | |
| if (likely(skb_cloned(skb) || ntail > 0)) { | |
| err = pskb_expand_head(skb, 0, ntail, GFP_ATOMIC); | |
| if (unlikely(err)) | |
| goto free_skb; | |
| } | |
| /* FIXME: The use of this function with non-linear skb's really needs | |
| * to be audited. | |
| */ | |
| err = skb_linearize(skb); | |
| if (unlikely(err)) | |
| goto free_skb; | |
| memset(skb->data + skb->len, 0, pad); | |
| return 0; | |
| free_skb: | |
| kfree_skb(skb); | |
| return err; | |
| } | |
| /** | |
| * skb_put - add data to a buffer | |
| * @skb: buffer to use | |
| * @len: amount of data to add | |
| * | |
| * This function extends the used data area of the buffer. If this would | |
| * exceed the total buffer size the kernel will panic. A pointer to the | |
| * first byte of the extra data is returned. | |
| */ | |
| unsigned char *skb_put(struct sk_buff *skb, unsigned int len) | |
| { | |
| unsigned char *tmp = skb_tail_pointer(skb); | |
| SKB_LINEAR_ASSERT(skb); | |
| skb->tail += len; | |
| skb->len += len; | |
| if (unlikely(skb->tail > skb->end)) | |
| skb_over_panic(skb, len, __builtin_return_address(0)); | |
| return tmp; | |
| } | |
| EXPORT_SYMBOL(skb_put); | |
| /** | |
| * skb_push - add data to the start of a buffer | |
| * @skb: buffer to use | |
| * @len: amount of data to add | |
| * | |
| * This function extends the used data area of the buffer at the buffer | |
| * start. If this would exceed the total buffer headroom the kernel will | |
| * panic. A pointer to the first byte of the extra data is returned. | |
| */ | |
| unsigned char *skb_push(struct sk_buff *skb, unsigned int len) | |
| { | |
| skb->data -= len; | |
| skb->len += len; | |
| if (unlikely(skb->data<skb->head)) | |
| skb_under_panic(skb, len, __builtin_return_address(0)); | |
| return skb->data; | |
| } | |
| EXPORT_SYMBOL(skb_push); | |
| /** | |
| * skb_pull - remove data from the start of a buffer | |
| * @skb: buffer to use | |
| * @len: amount of data to remove | |
| * | |
| * This function removes data from the start of a buffer, returning | |
| * the memory to the headroom. A pointer to the next data in the buffer | |
| * is returned. Once the data has been pulled future pushes will overwrite | |
| * the old data. | |
| */ | |
| unsigned char *skb_pull(struct sk_buff *skb, unsigned int len) | |
| { | |
| return unlikely(len > skb->len) ? NULL : __skb_pull(skb, len); | |
| } | |
| EXPORT_SYMBOL(skb_pull); | |
| /** | |
| * skb_trim - remove end from a buffer | |
| * @skb: buffer to alter | |
| * @len: new length | |
| * | |
| * Cut the length of a buffer down by removing data from the tail. If | |
| * the buffer is already under the length specified it is not modified. | |
| * The skb must be linear. | |
| */ | |
| void skb_trim(struct sk_buff *skb, unsigned int len) | |
| { | |
| if (skb->len > len) | |
| __skb_trim(skb, len); | |
| } | |
| EXPORT_SYMBOL(skb_trim); | |
| /* Trims skb to length len. It can change skb pointers. | |
| */ | |
| int ___pskb_trim(struct sk_buff *skb, unsigned int len) | |
| { | |
| struct sk_buff **fragp; | |
| struct sk_buff *frag; | |
| int offset = skb_headlen(skb); | |
| int nfrags = skb_shinfo(skb)->nr_frags; | |
| int i; | |
| int err; | |
| if (skb_cloned(skb) && | |
| unlikely((err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC)))) | |
| return err; | |
| i = 0; | |
| if (offset >= len) | |
| goto drop_pages; | |
| for (; i < nfrags; i++) { | |
| int end = offset + skb_shinfo(skb)->frags[i].size; | |
| if (end < len) { | |
| offset = end; | |
| continue; | |
| } | |
| skb_shinfo(skb)->frags[i++].size = len - offset; | |
| drop_pages: | |
| skb_shinfo(skb)->nr_frags = i; | |
| for (; i < nfrags; i++) | |
| put_page(skb_shinfo(skb)->frags[i].page); | |
| if (skb_shinfo(skb)->frag_list) | |
| skb_drop_fraglist(skb); | |
| goto done; | |
| } | |
| for (fragp = &skb_shinfo(skb)->frag_list; (frag = *fragp); | |
| fragp = &frag->next) { | |
| int end = offset + frag->len; | |
| if (skb_shared(frag)) { | |
| struct sk_buff *nfrag; | |
| nfrag = skb_clone(frag, GFP_ATOMIC); | |
| if (unlikely(!nfrag)) | |
| return -ENOMEM; | |
| nfrag->next = frag->next; | |
| kfree_skb(frag); | |
| frag = nfrag; | |
| *fragp = frag; | |
| } | |
| if (end < len) { | |
| offset = end; | |
| continue; | |
| } | |
| if (end > len && | |
| unlikely((err = pskb_trim(frag, len - offset)))) | |
| return err; | |
| if (frag->next) | |
| skb_drop_list(&frag->next); | |
| break; | |
| } | |
| done: | |
| if (len > skb_headlen(skb)) { | |
| skb->data_len -= skb->len - len; | |
| skb->len = len; | |
| } else { | |
| skb->len = len; | |
| skb->data_len = 0; | |
| skb_set_tail_pointer(skb, len); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * __pskb_pull_tail - advance tail of skb header | |
| * @skb: buffer to reallocate | |
| * @delta: number of bytes to advance tail | |
| * | |
| * The function makes a sense only on a fragmented &sk_buff, | |
| * it expands header moving its tail forward and copying necessary | |
| * data from fragmented part. | |
| * | |
| * &sk_buff MUST have reference count of 1. | |
| * | |
| * Returns %NULL (and &sk_buff does not change) if pull failed | |
| * or value of new tail of skb in the case of success. | |
| * | |
| * All the pointers pointing into skb header may change and must be | |
| * reloaded after call to this function. | |
| */ | |
| /* Moves tail of skb head forward, copying data from fragmented part, | |
| * when it is necessary. | |
| * 1. It may fail due to malloc failure. | |
| * 2. It may change skb pointers. | |
| * | |
| * It is pretty complicated. Luckily, it is called only in exceptional cases. | |
| */ | |
| unsigned char *__pskb_pull_tail(struct sk_buff *skb, int delta) | |
| { | |
| /* If skb has not enough free space at tail, get new one | |
| * plus 128 bytes for future expansions. If we have enough | |
| * room at tail, reallocate without expansion only if skb is cloned. | |
| */ | |
| int i, k, eat = (skb->tail + delta) - skb->end; | |
| if (eat > 0 || skb_cloned(skb)) { | |
| if (pskb_expand_head(skb, 0, eat > 0 ? eat + 128 : 0, | |
| GFP_ATOMIC)) | |
| return NULL; | |
| } | |
| if (skb_copy_bits(skb, skb_headlen(skb), skb_tail_pointer(skb), delta)) | |
| BUG(); | |
| /* Optimization: no fragments, no reasons to preestimate | |
| * size of pulled pages. Superb. | |
| */ | |
| if (!skb_shinfo(skb)->frag_list) | |
| goto pull_pages; | |
| /* Estimate size of pulled pages. */ | |
| eat = delta; | |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | |
| if (skb_shinfo(skb)->frags[i].size >= eat) | |
| goto pull_pages; | |
| eat -= skb_shinfo(skb)->frags[i].size; | |
| } | |
| /* If we need update frag list, we are in troubles. | |
| * Certainly, it possible to add an offset to skb data, | |
| * but taking into account that pulling is expected to | |
| * be very rare operation, it is worth to fight against | |
| * further bloating skb head and crucify ourselves here instead. | |
| * Pure masohism, indeed. 8)8) | |
| */ | |
| if (eat) { | |
| struct sk_buff *list = skb_shinfo(skb)->frag_list; | |
| struct sk_buff *clone = NULL; | |
| struct sk_buff *insp = NULL; | |
| do { | |
| BUG_ON(!list); | |
| if (list->len <= eat) { | |
| /* Eaten as whole. */ | |
| eat -= list->len; | |
| list = list->next; | |
| insp = list; | |
| } else { | |
| /* Eaten partially. */ | |
| if (skb_shared(list)) { | |
| /* Sucks! We need to fork list. :-( */ | |
| clone = skb_clone(list, GFP_ATOMIC); | |
| if (!clone) | |
| return NULL; | |
| insp = list->next; | |
| list = clone; | |
| } else { | |
| /* This may be pulled without | |
| * problems. */ | |
| insp = list; | |
| } | |
| if (!pskb_pull(list, eat)) { | |
| if (clone) | |
| kfree_skb(clone); | |
| return NULL; | |
| } | |
| break; | |
| } | |
| } while (eat); | |
| /* Free pulled out fragments. */ | |
| while ((list = skb_shinfo(skb)->frag_list) != insp) { | |
| skb_shinfo(skb)->frag_list = list->next; | |
| kfree_skb(list); | |
| } | |
| /* And insert new clone at head. */ | |
| if (clone) { | |
| clone->next = list; | |
| skb_shinfo(skb)->frag_list = clone; | |
| } | |
| } | |
| /* Success! Now we may commit changes to skb data. */ | |
| pull_pages: | |
| eat = delta; | |
| k = 0; | |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | |
| if (skb_shinfo(skb)->frags[i].size <= eat) { | |
| put_page(skb_shinfo(skb)->frags[i].page); | |
| eat -= skb_shinfo(skb)->frags[i].size; | |
| } else { | |
| skb_shinfo(skb)->frags[k] = skb_shinfo(skb)->frags[i]; | |
| if (eat) { | |
| skb_shinfo(skb)->frags[k].page_offset += eat; | |
| skb_shinfo(skb)->frags[k].size -= eat; | |
| eat = 0; | |
| } | |
| k++; | |
| } | |
| } | |
| skb_shinfo(skb)->nr_frags = k; | |
| skb->tail += delta; | |
| skb->data_len -= delta; | |
| return skb_tail_pointer(skb); | |
| } | |
| /* Copy some data bits from skb to kernel buffer. */ | |
| int skb_copy_bits(const struct sk_buff *skb, int offset, void *to, int len) | |
| { | |
| int i, copy; | |
| int start = skb_headlen(skb); | |
| if (offset > (int)skb->len - len) | |
| goto fault; | |
| /* Copy header. */ | |
| if ((copy = start - offset) > 0) { | |
| if (copy > len) | |
| copy = len; | |
| skb_copy_from_linear_data_offset(skb, offset, to, copy); | |
| if ((len -= copy) == 0) | |
| return 0; | |
| offset += copy; | |
| to += copy; | |
| } | |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | |
| int end; | |
| BUG_TRAP(start <= offset + len); | |
| end = start + skb_shinfo(skb)->frags[i].size; | |
| if ((copy = end - offset) > 0) { | |
| u8 *vaddr; | |
| if (copy > len) | |
| copy = len; | |
| vaddr = kmap_skb_frag(&skb_shinfo(skb)->frags[i]); | |
| memcpy(to, | |
| vaddr + skb_shinfo(skb)->frags[i].page_offset+ | |
| offset - start, copy); | |
| kunmap_skb_frag(vaddr); | |
| if ((len -= copy) == 0) | |
| return 0; | |
| offset += copy; | |
| to += copy; | |
| } | |
| start = end; | |
| } | |
| if (skb_shinfo(skb)->frag_list) { | |
| struct sk_buff *list = skb_shinfo(skb)->frag_list; | |
| for (; list; list = list->next) { | |
| int end; | |
| BUG_TRAP(start <= offset + len); | |
| end = start + list->len; | |
| if ((copy = end - offset) > 0) { | |
| if (copy > len) | |
| copy = len; | |
| if (skb_copy_bits(list, offset - start, | |
| to, copy)) | |
| goto fault; | |
| if ((len -= copy) == 0) | |
| return 0; | |
| offset += copy; | |
| to += copy; | |
| } | |
| start = end; | |
| } | |
| } | |
| if (!len) | |
| return 0; | |
| fault: | |
| return -EFAULT; | |
| } | |
| /* | |
| * Callback from splice_to_pipe(), if we need to release some pages | |
| * at the end of the spd in case we error'ed out in filling the pipe. | |
| */ | |
| static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i) | |
| { | |
| struct sk_buff *skb = (struct sk_buff *) spd->partial[i].private; | |
| kfree_skb(skb); | |
| } | |
| /* | |
| * Fill page/offset/length into spd, if it can hold more pages. | |
| */ | |
| static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page, | |
| unsigned int len, unsigned int offset, | |
| struct sk_buff *skb) | |
| { | |
| if (unlikely(spd->nr_pages == PIPE_BUFFERS)) | |
| return 1; | |
| spd->pages[spd->nr_pages] = page; | |
| spd->partial[spd->nr_pages].len = len; | |
| spd->partial[spd->nr_pages].offset = offset; | |
| spd->partial[spd->nr_pages].private = (unsigned long) skb_get(skb); | |
| spd->nr_pages++; | |
| return 0; | |
| } | |
| /* | |
| * Map linear and fragment data from the skb to spd. Returns number of | |
| * pages mapped. | |
| */ | |
| static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, | |
| unsigned int *total_len, | |
| struct splice_pipe_desc *spd) | |
| { | |
| unsigned int nr_pages = spd->nr_pages; | |
| unsigned int poff, plen, len, toff, tlen; | |
| int headlen, seg; | |
| toff = *offset; | |
| tlen = *total_len; | |
| if (!tlen) | |
| goto err; | |
| /* | |
| * if the offset is greater than the linear part, go directly to | |
| * the fragments. | |
| */ | |
| headlen = skb_headlen(skb); | |
| if (toff >= headlen) { | |
| toff -= headlen; | |
| goto map_frag; | |
| } | |
| /* | |
| * first map the linear region into the pages/partial map, skipping | |
| * any potential initial offset. | |
| */ | |
| len = 0; | |
| while (len < headlen) { | |
| void *p = skb->data + len; | |
| poff = (unsigned long) p & (PAGE_SIZE - 1); | |
| plen = min_t(unsigned int, headlen - len, PAGE_SIZE - poff); | |
| len += plen; | |
| if (toff) { | |
| if (plen <= toff) { | |
| toff -= plen; | |
| continue; | |
| } | |
| plen -= toff; | |
| poff += toff; | |
| toff = 0; | |
| } | |
| plen = min(plen, tlen); | |
| if (!plen) | |
| break; | |
| /* | |
| * just jump directly to update and return, no point | |
| * in going over fragments when the output is full. | |
| */ | |
| if (spd_fill_page(spd, virt_to_page(p), plen, poff, skb)) | |
| goto done; | |
| tlen -= plen; | |
| } | |
| /* | |
| * then map the fragments | |
| */ | |
| map_frag: | |
| for (seg = 0; seg < skb_shinfo(skb)->nr_frags; seg++) { | |
| const skb_frag_t *f = &skb_shinfo(skb)->frags[seg]; | |
| plen = f->size; | |
| poff = f->page_offset; | |
| if (toff) { | |
| if (plen <= toff) { | |
| toff -= plen; | |
| continue; | |
| } | |
| plen -= toff; | |
| poff += toff; | |
| toff = 0; | |
| } | |
| plen = min(plen, tlen); | |
| if (!plen) | |
| break; | |
| if (spd_fill_page(spd, f->page, plen, poff, skb)) | |
| break; | |
| tlen -= plen; | |
| } | |
| done: | |
| if (spd->nr_pages - nr_pages) { | |
| *offset = 0; | |
| *total_len = tlen; | |
| return 0; | |
| } | |
| err: | |
| return 1; | |
| } | |
| /* | |
| * Map data from the skb to a pipe. Should handle both the linear part, | |
| * the fragments, and the frag list. It does NOT handle frag lists within | |
| * the frag list, if such a thing exists. We'd probably need to recurse to | |
| * handle that cleanly. | |
| */ | |
| int skb_splice_bits(struct sk_buff *__skb, unsigned int offset, | |
| struct pipe_inode_info *pipe, unsigned int tlen, | |
| unsigned int flags) | |
| { | |
| struct partial_page partial[PIPE_BUFFERS]; | |
| struct page *pages[PIPE_BUFFERS]; | |
| struct splice_pipe_desc spd = { | |
| .pages = pages, | |
| .partial = partial, | |
| .flags = flags, | |
| .ops = &sock_pipe_buf_ops, | |
| .spd_release = sock_spd_release, | |
| }; | |
| struct sk_buff *skb; | |
| /* | |
| * I'd love to avoid the clone here, but tcp_read_sock() | |
| * ignores reference counts and unconditonally kills the sk_buff | |
| * on return from the actor. | |
| */ | |
| skb = skb_clone(__skb, GFP_KERNEL); | |
| if (unlikely(!skb)) | |
| return -ENOMEM; | |
| /* | |
| * __skb_splice_bits() only fails if the output has no room left, | |
| * so no point in going over the frag_list for the error case. | |
| */ | |
| if (__skb_splice_bits(skb, &offset, &tlen, &spd)) | |
| goto done; | |
| else if (!tlen) | |
| goto done; | |
| /* | |
| * now see if we have a frag_list to map | |
| */ | |
| if (skb_shinfo(skb)->frag_list) { | |
| struct sk_buff *list = skb_shinfo(skb)->frag_list; | |
| for (; list && tlen; list = list->next) { | |
| if (__skb_splice_bits(list, &offset, &tlen, &spd)) | |
| break; | |
| } | |
| } | |
| done: | |
| /* | |
| * drop our reference to the clone, the pipe consumption will | |
| * drop the rest. | |
| */ | |
| kfree_skb(skb); | |
| if (spd.nr_pages) { | |
| int ret; | |
| struct sock *sk = __skb->sk; | |
| /* | |
| * Drop the socket lock, otherwise we have reverse | |
| * locking dependencies between sk_lock and i_mutex | |
| * here as compared to sendfile(). We enter here | |
| * with the socket lock held, and splice_to_pipe() will | |
| * grab the pipe inode lock. For sendfile() emulation, | |
| * we call into ->sendpage() with the i_mutex lock held | |
| * and networking will grab the socket lock. | |
| */ | |
| release_sock(sk); | |
| ret = splice_to_pipe(pipe, &spd); | |
| lock_sock(sk); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * skb_store_bits - store bits from kernel buffer to skb | |
| * @skb: destination buffer | |
| * @offset: offset in destination | |
| * @from: source buffer | |
| * @len: number of bytes to copy | |
| * | |
| * Copy the specified number of bytes from the source buffer to the | |
| * destination skb. This function handles all the messy bits of | |
| * traversing fragment lists and such. | |
| */ | |
| int skb_store_bits(struct sk_buff *skb, int offset, const void *from, int len) | |
| { | |
| int i, copy; | |
| int start = skb_headlen(skb); | |
| if (offset > (int)skb->len - len) | |
| goto fault; | |
| if ((copy = start - offset) > 0) { | |
| if (copy > len) | |
| copy = len; | |
| skb_copy_to_linear_data_offset(skb, offset, from, copy); | |
| if ((len -= copy) == 0) | |
| return 0; | |
| offset += copy; | |
| from += copy; | |
| } | |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | |
| skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; | |
| int end; | |
| BUG_TRAP(start <= offset + len); | |
| end = start + frag->size; | |
| if ((copy = end - offset) > 0) { | |
| u8 *vaddr; | |
| if (copy > len) | |
| copy = len; | |
| vaddr = kmap_skb_frag(frag); | |
| memcpy(vaddr + frag->page_offset + offset - start, | |
| from, copy); | |
| kunmap_skb_frag(vaddr); | |
| if ((len -= copy) == 0) | |
| return 0; | |
| offset += copy; | |
| from += copy; | |
| } | |
| start = end; | |
| } | |
| if (skb_shinfo(skb)->frag_list) { | |
| struct sk_buff *list = skb_shinfo(skb)->frag_list; | |
| for (; list; list = list->next) { | |
| int end; | |
| BUG_TRAP(start <= offset + len); | |
| end = start + list->len; | |
| if ((copy = end - offset) > 0) { | |
| if (copy > len) | |
| copy = len; | |
| if (skb_store_bits(list, offset - start, | |
| from, copy)) | |
| goto fault; | |
| if ((len -= copy) == 0) | |
| return 0; | |
| offset += copy; | |
| from += copy; | |
| } | |
| start = end; | |
| } | |
| } | |
| if (!len) | |
| return 0; | |
| fault: | |
| return -EFAULT; | |
| } | |
| EXPORT_SYMBOL(skb_store_bits); | |
| /* Checksum skb data. */ | |
| __wsum skb_checksum(const struct sk_buff *skb, int offset, | |
| int len, __wsum csum) | |
| { | |
| int start = skb_headlen(skb); | |
| int i, copy = start - offset; | |
| int pos = 0; | |
| /* Checksum header. */ | |
| if (copy > 0) { | |
| if (copy > len) | |
| copy = len; | |
| csum = csum_partial(skb->data + offset, copy, csum); | |
| if ((len -= copy) == 0) | |
| return csum; | |
| offset += copy; | |
| pos = copy; | |
| } | |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | |
| int end; | |
| BUG_TRAP(start <= offset + len); | |
| end = start + skb_shinfo(skb)->frags[i].size; | |
| if ((copy = end - offset) > 0) { | |
| __wsum csum2; | |
| u8 *vaddr; | |
| skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; | |
| if (copy > len) | |
| copy = len; | |
| vaddr = kmap_skb_frag(frag); | |
| csum2 = csum_partial(vaddr + frag->page_offset + | |
| offset - start, copy, 0); | |
| kunmap_skb_frag(vaddr); | |
| csum = csum_block_add(csum, csum2, pos); | |
| if (!(len -= copy)) | |
| return csum; | |
| offset += copy; | |
| pos += copy; | |
| } | |
| start = end; | |
| } | |
| if (skb_shinfo(skb)->frag_list) { | |
| struct sk_buff *list = skb_shinfo(skb)->frag_list; | |
| for (; list; list = list->next) { | |
| int end; | |
| BUG_TRAP(start <= offset + len); | |
| end = start + list->len; | |
| if ((copy = end - offset) > 0) { | |
| __wsum csum2; | |
| if (copy > len) | |
| copy = len; | |
| csum2 = skb_checksum(list, offset - start, | |
| copy, 0); | |
| csum = csum_block_add(csum, csum2, pos); | |
| if ((len -= copy) == 0) | |
| return csum; | |
| offset += copy; | |
| pos += copy; | |
| } | |
| start = end; | |
| } | |
| } | |
| BUG_ON(len); | |
| return csum; | |
| } | |
| /* Both of above in one bottle. */ | |
| __wsum skb_copy_and_csum_bits(const struct sk_buff *skb, int offset, | |
| u8 *to, int len, __wsum csum) | |
| { | |
| int start = skb_headlen(skb); | |
| int i, copy = start - offset; | |
| int pos = 0; | |
| /* Copy header. */ | |
| if (copy > 0) { | |
| if (copy > len) | |
| copy = len; | |
| csum = csum_partial_copy_nocheck(skb->data + offset, to, | |
| copy, csum); | |
| if ((len -= copy) == 0) | |
| return csum; | |
| offset += copy; | |
| to += copy; | |
| pos = copy; | |
| } | |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | |
| int end; | |
| BUG_TRAP(start <= offset + len); | |
| end = start + skb_shinfo(skb)->frags[i].size; | |
| if ((copy = end - offset) > 0) { | |
| __wsum csum2; | |
| u8 *vaddr; | |
| skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; | |
| if (copy > len) | |
| copy = len; | |
| vaddr = kmap_skb_frag(frag); | |
| csum2 = csum_partial_copy_nocheck(vaddr + | |
| frag->page_offset + | |
| offset - start, to, | |
| copy, 0); | |
| kunmap_skb_frag(vaddr); | |
| csum = csum_block_add(csum, csum2, pos); | |
| if (!(len -= copy)) | |
| return csum; | |
| offset += copy; | |
| to += copy; | |
| pos += copy; | |
| } | |
| start = end; | |
| } | |
| if (skb_shinfo(skb)->frag_list) { | |
| struct sk_buff *list = skb_shinfo(skb)->frag_list; | |
| for (; list; list = list->next) { | |
| __wsum csum2; | |
| int end; | |
| BUG_TRAP(start <= offset + len); | |
| end = start + list->len; | |
| if ((copy = end - offset) > 0) { | |
| if (copy > len) | |
| copy = len; | |
| csum2 = skb_copy_and_csum_bits(list, | |
| offset - start, | |
| to, copy, 0); | |
| csum = csum_block_add(csum, csum2, pos); | |
| if ((len -= copy) == 0) | |
| return csum; | |
| offset += copy; | |
| to += copy; | |
| pos += copy; | |
| } | |
| start = end; | |
| } | |
| } | |
| BUG_ON(len); | |
| return csum; | |
| } | |
| void skb_copy_and_csum_dev(const struct sk_buff *skb, u8 *to) | |
| { | |
| __wsum csum; | |
| long csstart; | |
| if (skb->ip_summed == CHECKSUM_PARTIAL) | |
| csstart = skb->csum_start - skb_headroom(skb); | |
| else | |
| csstart = skb_headlen(skb); | |
| BUG_ON(csstart > skb_headlen(skb)); | |
| skb_copy_from_linear_data(skb, to, csstart); | |
| csum = 0; | |
| if (csstart != skb->len) | |
| csum = skb_copy_and_csum_bits(skb, csstart, to + csstart, | |
| skb->len - csstart, 0); | |
| if (skb->ip_summed == CHECKSUM_PARTIAL) { | |
| long csstuff = csstart + skb->csum_offset; | |
| *((__sum16 *)(to + csstuff)) = csum_fold(csum); | |
| } | |
| } | |
| /** | |
| * skb_dequeue - remove from the head of the queue | |
| * @list: list to dequeue from | |
| * | |
| * Remove the head of the list. The list lock is taken so the function | |
| * may be used safely with other locking list functions. The head item is | |
| * returned or %NULL if the list is empty. | |
| */ | |
| struct sk_buff *skb_dequeue(struct sk_buff_head *list) | |
| { | |
| unsigned long flags; | |
| struct sk_buff *result; | |
| spin_lock_irqsave(&list->lock, flags); | |
| result = __skb_dequeue(list); | |
| spin_unlock_irqrestore(&list->lock, flags); | |
| return result; | |
| } | |
| /** | |
| * skb_dequeue_tail - remove from the tail of the queue | |
| * @list: list to dequeue from | |
| * | |
| * Remove the tail of the list. The list lock is taken so the function | |
| * may be used safely with other locking list functions. The tail item is | |
| * returned or %NULL if the list is empty. | |
| */ | |
| struct sk_buff *skb_dequeue_tail(struct sk_buff_head *list) | |
| { | |
| unsigned long flags; | |
| struct sk_buff *result; | |
| spin_lock_irqsave(&list->lock, flags); | |
| result = __skb_dequeue_tail(list); | |
| spin_unlock_irqrestore(&list->lock, flags); | |
| return result; | |
| } | |
| /** | |
| * skb_queue_purge - empty a list | |
| * @list: list to empty | |
| * | |
| * Delete all buffers on an &sk_buff list. Each buffer is removed from | |
| * the list and one reference dropped. This function takes the list | |
| * lock and is atomic with respect to other list locking functions. | |
| */ | |
| void skb_queue_purge(struct sk_buff_head *list) | |
| { | |
| struct sk_buff *skb; | |
| while ((skb = skb_dequeue(list)) != NULL) | |
| kfree_skb(skb); | |
| } | |
| /** | |
| * skb_queue_head - queue a buffer at the list head | |
| * @list: list to use | |
| * @newsk: buffer to queue | |
| * | |
| * Queue a buffer at the start of the list. This function takes the | |
| * list lock and can be used safely with other locking &sk_buff functions | |
| * safely. | |
| * | |
| * A buffer cannot be placed on two lists at the same time. | |
| */ | |
| void skb_queue_head(struct sk_buff_head *list, struct sk_buff *newsk) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&list->lock, flags); | |
| __skb_queue_head(list, newsk); | |
| spin_unlock_irqrestore(&list->lock, flags); | |
| } | |
| /** | |
| * skb_queue_tail - queue a buffer at the list tail | |
| * @list: list to use | |
| * @newsk: buffer to queue | |
| * | |
| * Queue a buffer at the tail of the list. This function takes the | |
| * list lock and can be used safely with other locking &sk_buff functions | |
| * safely. | |
| * | |
| * A buffer cannot be placed on two lists at the same time. | |
| */ | |
| void skb_queue_tail(struct sk_buff_head *list, struct sk_buff *newsk) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&list->lock, flags); | |
| __skb_queue_tail(list, newsk); | |
| spin_unlock_irqrestore(&list->lock, flags); | |
| } | |
| /** | |
| * skb_unlink - remove a buffer from a list | |
| * @skb: buffer to remove | |
| * @list: list to use | |
| * | |
| * Remove a packet from a list. The list locks are taken and this | |
| * function is atomic with respect to other list locked calls | |
| * | |
| * You must know what list the SKB is on. | |
| */ | |
| void skb_unlink(struct sk_buff *skb, struct sk_buff_head *list) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&list->lock, flags); | |
| __skb_unlink(skb, list); | |
| spin_unlock_irqrestore(&list->lock, flags); | |
| } | |
| /** | |
| * skb_append - append a buffer | |
| * @old: buffer to insert after | |
| * @newsk: buffer to insert | |
| * @list: list to use | |
| * | |
| * Place a packet after a given packet in a list. The list locks are taken | |
| * and this function is atomic with respect to other list locked calls. | |
| * A buffer cannot be placed on two lists at the same time. | |
| */ | |
| void skb_append(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&list->lock, flags); | |
| __skb_queue_after(list, old, newsk); | |
| spin_unlock_irqrestore(&list->lock, flags); | |
| } | |
| /** | |
| * skb_insert - insert a buffer | |
| * @old: buffer to insert before | |
| * @newsk: buffer to insert | |
| * @list: list to use | |
| * | |
| * Place a packet before a given packet in a list. The list locks are | |
| * taken and this function is atomic with respect to other list locked | |
| * calls. | |
| * | |
| * A buffer cannot be placed on two lists at the same time. | |
| */ | |
| void skb_insert(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&list->lock, flags); | |
| __skb_insert(newsk, old->prev, old, list); | |
| spin_unlock_irqrestore(&list->lock, flags); | |
| } | |
| static inline void skb_split_inside_header(struct sk_buff *skb, | |
| struct sk_buff* skb1, | |
| const u32 len, const int pos) | |
| { | |
| int i; | |
| skb_copy_from_linear_data_offset(skb, len, skb_put(skb1, pos - len), | |
| pos - len); | |
| /* And move data appendix as is. */ | |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) | |
| skb_shinfo(skb1)->frags[i] = skb_shinfo(skb)->frags[i]; | |
| skb_shinfo(skb1)->nr_frags = skb_shinfo(skb)->nr_frags; | |
| skb_shinfo(skb)->nr_frags = 0; | |
| skb1->data_len = skb->data_len; | |
| skb1->len += skb1->data_len; | |
| skb->data_len = 0; | |
| skb->len = len; | |
| skb_set_tail_pointer(skb, len); | |
| } | |
| static inline void skb_split_no_header(struct sk_buff *skb, | |
| struct sk_buff* skb1, | |
| const u32 len, int pos) | |
| { | |
| int i, k = 0; | |
| const int nfrags = skb_shinfo(skb)->nr_frags; | |
| skb_shinfo(skb)->nr_frags = 0; | |
| skb1->len = skb1->data_len = skb->len - len; | |
| skb->len = len; | |
| skb->data_len = len - pos; | |
| for (i = 0; i < nfrags; i++) { | |
| int size = skb_shinfo(skb)->frags[i].size; | |
| if (pos + size > len) { | |
| skb_shinfo(skb1)->frags[k] = skb_shinfo(skb)->frags[i]; | |
| if (pos < len) { | |
| /* Split frag. | |
| * We have two variants in this case: | |
| * 1. Move all the frag to the second | |
| * part, if it is possible. F.e. | |
| * this approach is mandatory for TUX, | |
| * where splitting is expensive. | |
| * 2. Split is accurately. We make this. | |
| */ | |
| get_page(skb_shinfo(skb)->frags[i].page); | |
| skb_shinfo(skb1)->frags[0].page_offset += len - pos; | |
| skb_shinfo(skb1)->frags[0].size -= len - pos; | |
| skb_shinfo(skb)->frags[i].size = len - pos; | |
| skb_shinfo(skb)->nr_frags++; | |
| } | |
| k++; | |
| } else | |
| skb_shinfo(skb)->nr_frags++; | |
| pos += size; | |
| } | |
| skb_shinfo(skb1)->nr_frags = k; | |
| } | |
| /** | |
| * skb_split - Split fragmented skb to two parts at length len. | |
| * @skb: the buffer to split | |
| * @skb1: the buffer to receive the second part | |
| * @len: new length for skb | |
| */ | |
| void skb_split(struct sk_buff *skb, struct sk_buff *skb1, const u32 len) | |
| { | |
| int pos = skb_headlen(skb); | |
| if (len < pos) /* Split line is inside header. */ | |
| skb_split_inside_header(skb, skb1, len, pos); | |
| else /* Second chunk has no header, nothing to copy. */ | |
| skb_split_no_header(skb, skb1, len, pos); | |
| } | |
| /** | |
| * skb_prepare_seq_read - Prepare a sequential read of skb data | |
| * @skb: the buffer to read | |
| * @from: lower offset of data to be read | |
| * @to: upper offset of data to be read | |
| * @st: state variable | |
| * | |
| * Initializes the specified state variable. Must be called before | |
| * invoking skb_seq_read() for the first time. | |
| */ | |
| void skb_prepare_seq_read(struct sk_buff *skb, unsigned int from, | |
| unsigned int to, struct skb_seq_state *st) | |
| { | |
| st->lower_offset = from; | |
| st->upper_offset = to; | |
| st->root_skb = st->cur_skb = skb; | |
| st->frag_idx = st->stepped_offset = 0; | |
| st->frag_data = NULL; | |
| } | |
| /** | |
| * skb_seq_read - Sequentially read skb data | |
| * @consumed: number of bytes consumed by the caller so far | |
| * @data: destination pointer for data to be returned | |
| * @st: state variable | |
| * | |
| * Reads a block of skb data at &consumed relative to the | |
| * lower offset specified to skb_prepare_seq_read(). Assigns | |
| * the head of the data block to &data and returns the length | |
| * of the block or 0 if the end of the skb data or the upper | |
| * offset has been reached. | |
| * | |
| * The caller is not required to consume all of the data | |
| * returned, i.e. &consumed is typically set to the number | |
| * of bytes already consumed and the next call to | |
| * skb_seq_read() will return the remaining part of the block. | |
| * | |
| * Note 1: The size of each block of data returned can be arbitary, | |
| * this limitation is the cost for zerocopy seqeuental | |
| * reads of potentially non linear data. | |
| * | |
| * Note 2: Fragment lists within fragments are not implemented | |
| * at the moment, state->root_skb could be replaced with | |
| * a stack for this purpose. | |
| */ | |
| unsigned int skb_seq_read(unsigned int consumed, const u8 **data, | |
| struct skb_seq_state *st) | |
| { | |
| unsigned int block_limit, abs_offset = consumed + st->lower_offset; | |
| skb_frag_t *frag; | |
| if (unlikely(abs_offset >= st->upper_offset)) | |
| return 0; | |
| next_skb: | |
| block_limit = skb_headlen(st->cur_skb); | |
| if (abs_offset < block_limit) { | |
| *data = st->cur_skb->data + abs_offset; | |
| return block_limit - abs_offset; | |
| } | |
| if (st->frag_idx == 0 && !st->frag_data) | |
| st->stepped_offset += skb_headlen(st->cur_skb); | |
| while (st->frag_idx < skb_shinfo(st->cur_skb)->nr_frags) { | |
| frag = &skb_shinfo(st->cur_skb)->frags[st->frag_idx]; | |
| block_limit = frag->size + st->stepped_offset; | |
| if (abs_offset < block_limit) { | |
| if (!st->frag_data) | |
| st->frag_data = kmap_skb_frag(frag); | |
| *data = (u8 *) st->frag_data + frag->page_offset + | |
| (abs_offset - st->stepped_offset); | |
| return block_limit - abs_offset; | |
| } | |
| if (st->frag_data) { | |
| kunmap_skb_frag(st->frag_data); | |
| st->frag_data = NULL; | |
| } | |
| st->frag_idx++; | |
| st->stepped_offset += frag->size; | |
| } | |
| if (st->frag_data) { | |
| kunmap_skb_frag(st->frag_data); | |
| st->frag_data = NULL; | |
| } | |
| if (st->cur_skb->next) { | |
| st->cur_skb = st->cur_skb->next; | |
| st->frag_idx = 0; | |
| goto next_skb; | |
| } else if (st->root_skb == st->cur_skb && | |
| skb_shinfo(st->root_skb)->frag_list) { | |
| st->cur_skb = skb_shinfo(st->root_skb)->frag_list; | |
| goto next_skb; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * skb_abort_seq_read - Abort a sequential read of skb data | |
| * @st: state variable | |
| * | |
| * Must be called if skb_seq_read() was not called until it | |
| * returned 0. | |
| */ | |
| void skb_abort_seq_read(struct skb_seq_state *st) | |
| { | |
| if (st->frag_data) | |
| kunmap_skb_frag(st->frag_data); | |
| } | |
| #define TS_SKB_CB(state) ((struct skb_seq_state *) &((state)->cb)) | |
| static unsigned int skb_ts_get_next_block(unsigned int offset, const u8 **text, | |
| struct ts_config *conf, | |
| struct ts_state *state) | |
| { | |
| return skb_seq_read(offset, text, TS_SKB_CB(state)); | |
| } | |
| static void skb_ts_finish(struct ts_config *conf, struct ts_state *state) | |
| { | |
| skb_abort_seq_read(TS_SKB_CB(state)); | |
| } | |
| /** | |
| * skb_find_text - Find a text pattern in skb data | |
| * @skb: the buffer to look in | |
| * @from: search offset | |
| * @to: search limit | |
| * @config: textsearch configuration | |
| * @state: uninitialized textsearch state variable | |
| * | |
| * Finds a pattern in the skb data according to the specified | |
| * textsearch configuration. Use textsearch_next() to retrieve | |
| * subsequent occurrences of the pattern. Returns the offset | |
| * to the first occurrence or UINT_MAX if no match was found. | |
| */ | |
| unsigned int skb_find_text(struct sk_buff *skb, unsigned int from, | |
| unsigned int to, struct ts_config *config, | |
| struct ts_state *state) | |
| { | |
| unsigned int ret; | |
| config->get_next_block = skb_ts_get_next_block; | |
| config->finish = skb_ts_finish; | |
| skb_prepare_seq_read(skb, from, to, TS_SKB_CB(state)); | |
| ret = textsearch_find(config, state); | |
| return (ret <= to - from ? ret : UINT_MAX); | |
| } | |
| /** | |
| * skb_append_datato_frags: - append the user data to a skb | |
| * @sk: sock structure | |
| * @skb: skb structure to be appened with user data. | |
| * @getfrag: call back function to be used for getting the user data | |
| * @from: pointer to user message iov | |
| * @length: length of the iov message | |
| * | |
| * Description: This procedure append the user data in the fragment part | |
| * of the skb if any page alloc fails user this procedure returns -ENOMEM | |
| */ | |
| int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb, | |
| int (*getfrag)(void *from, char *to, int offset, | |
| int len, int odd, struct sk_buff *skb), | |
| void *from, int length) | |
| { | |
| int frg_cnt = 0; | |
| skb_frag_t *frag = NULL; | |
| struct page *page = NULL; | |
| int copy, left; | |
| int offset = 0; | |
| int ret; | |
| do { | |
| /* Return error if we don't have space for new frag */ | |
| frg_cnt = skb_shinfo(skb)->nr_frags; | |
| if (frg_cnt >= MAX_SKB_FRAGS) | |
| return -EFAULT; | |
| /* allocate a new page for next frag */ | |
| page = alloc_pages(sk->sk_allocation, 0); | |
| /* If alloc_page fails just return failure and caller will | |
| * free previous allocated pages by doing kfree_skb() | |
| */ | |
| if (page == NULL) | |
| return -ENOMEM; | |
| /* initialize the next frag */ | |
| sk->sk_sndmsg_page = page; | |
| sk->sk_sndmsg_off = 0; | |
| skb_fill_page_desc(skb, frg_cnt, page, 0, 0); | |
| skb->truesize += PAGE_SIZE; | |
| atomic_add(PAGE_SIZE, &sk->sk_wmem_alloc); | |
| /* get the new initialized frag */ | |
| frg_cnt = skb_shinfo(skb)->nr_frags; | |
| frag = &skb_shinfo(skb)->frags[frg_cnt - 1]; | |
| /* copy the user data to page */ | |
| left = PAGE_SIZE - frag->page_offset; | |
| copy = (length > left)? left : length; | |
| ret = getfrag(from, (page_address(frag->page) + | |
| frag->page_offset + frag->size), | |
| offset, copy, 0, skb); | |
| if (ret < 0) | |
| return -EFAULT; | |
| /* copy was successful so update the size parameters */ | |
| sk->sk_sndmsg_off += copy; | |
| frag->size += copy; | |
| skb->len += copy; | |
| skb->data_len += copy; | |
| offset += copy; | |
| length -= copy; | |
| } while (length > 0); | |
| return 0; | |
| } | |
| /** | |
| * skb_pull_rcsum - pull skb and update receive checksum | |
| * @skb: buffer to update | |
| * @len: length of data pulled | |
| * | |
| * This function performs an skb_pull on the packet and updates | |
| * the CHECKSUM_COMPLETE checksum. It should be used on | |
| * receive path processing instead of skb_pull unless you know | |
| * that the checksum difference is zero (e.g., a valid IP header) | |
| * or you are setting ip_summed to CHECKSUM_NONE. | |
| */ | |
| unsigned char *skb_pull_rcsum(struct sk_buff *skb, unsigned int len) | |
| { | |
| BUG_ON(len > skb->len); | |
| skb->len -= len; | |
| BUG_ON(skb->len < skb->data_len); | |
| skb_postpull_rcsum(skb, skb->data, len); | |
| return skb->data += len; | |
| } | |
| EXPORT_SYMBOL_GPL(skb_pull_rcsum); | |
| /** | |
| * skb_segment - Perform protocol segmentation on skb. | |
| * @skb: buffer to segment | |
| * @features: features for the output path (see dev->features) | |
| * | |
| * This function performs segmentation on the given skb. It returns | |
| * a pointer to the first in a list of new skbs for the segments. | |
| * In case of error it returns ERR_PTR(err). | |
| */ | |
| struct sk_buff *skb_segment(struct sk_buff *skb, int features) | |
| { | |
| struct sk_buff *segs = NULL; | |
| struct sk_buff *tail = NULL; | |
| unsigned int mss = skb_shinfo(skb)->gso_size; | |
| unsigned int doffset = skb->data - skb_mac_header(skb); | |
| unsigned int offset = doffset; | |
| unsigned int headroom; | |
| unsigned int len; | |
| int sg = features & NETIF_F_SG; | |
| int nfrags = skb_shinfo(skb)->nr_frags; | |
| int err = -ENOMEM; | |
| int i = 0; | |
| int pos; | |
| __skb_push(skb, doffset); | |
| headroom = skb_headroom(skb); | |
| pos = skb_headlen(skb); | |
| do { | |
| struct sk_buff *nskb; | |
| skb_frag_t *frag; | |
| int hsize; | |
| int k; | |
| int size; | |
| len = skb->len - offset; | |
| if (len > mss) | |
| len = mss; | |
| hsize = skb_headlen(skb) - offset; | |
| if (hsize < 0) | |
| hsize = 0; | |
| if (hsize > len || !sg) | |
| hsize = len; | |
| nskb = alloc_skb(hsize + doffset + headroom, GFP_ATOMIC); | |
| if (unlikely(!nskb)) | |
| goto err; | |
| if (segs) | |
| tail->next = nskb; | |
| else | |
| segs = nskb; | |
| tail = nskb; | |
| nskb->dev = skb->dev; | |
| skb_copy_queue_mapping(nskb, skb); | |
| nskb->priority = skb->priority; | |
| nskb->protocol = skb->protocol; | |
| nskb->dst = dst_clone(skb->dst); | |
| memcpy(nskb->cb, skb->cb, sizeof(skb->cb)); | |
| nskb->pkt_type = skb->pkt_type; | |
| nskb->mac_len = skb->mac_len; | |
| skb_reserve(nskb, headroom); | |
| skb_reset_mac_header(nskb); | |
| skb_set_network_header(nskb, skb->mac_len); | |
| nskb->transport_header = (nskb->network_header + | |
| skb_network_header_len(skb)); | |
| skb_copy_from_linear_data(skb, skb_put(nskb, doffset), | |
| doffset); | |
| if (!sg) { | |
| nskb->csum = skb_copy_and_csum_bits(skb, offset, | |
| skb_put(nskb, len), | |
| len, 0); | |
| continue; | |
| } | |
| frag = skb_shinfo(nskb)->frags; | |
| k = 0; | |
| nskb->ip_summed = CHECKSUM_PARTIAL; | |
| nskb->csum = skb->csum; | |
| skb_copy_from_linear_data_offset(skb, offset, | |
| skb_put(nskb, hsize), hsize); | |
| while (pos < offset + len) { | |
| BUG_ON(i >= nfrags); | |
| *frag = skb_shinfo(skb)->frags[i]; | |
| get_page(frag->page); | |
| size = frag->size; | |
| if (pos < offset) { | |
| frag->page_offset += offset - pos; | |
| frag->size -= offset - pos; | |
| } | |
| k++; | |
| if (pos + size <= offset + len) { | |
| i++; | |
| pos += size; | |
| } else { | |
| frag->size -= pos + size - (offset + len); | |
| break; | |
| } | |
| frag++; | |
| } | |
| skb_shinfo(nskb)->nr_frags = k; | |
| nskb->data_len = len - hsize; | |
| nskb->len += nskb->data_len; | |
| nskb->truesize += nskb->data_len; | |
| } while ((offset += len) < skb->len); | |
| return segs; | |
| err: | |
| while ((skb = segs)) { | |
| segs = skb->next; | |
| kfree_skb(skb); | |
| } | |
| return ERR_PTR(err); | |
| } | |
| EXPORT_SYMBOL_GPL(skb_segment); | |
| void __init skb_init(void) | |
| { | |
| skbuff_head_cache = kmem_cache_create("skbuff_head_cache", | |
| sizeof(struct sk_buff), | |
| 0, | |
| SLAB_HWCACHE_ALIGN|SLAB_PANIC, | |
| NULL); | |
| skbuff_fclone_cache = kmem_cache_create("skbuff_fclone_cache", | |
| (2*sizeof(struct sk_buff)) + | |
| sizeof(atomic_t), | |
| 0, | |
| SLAB_HWCACHE_ALIGN|SLAB_PANIC, | |
| NULL); | |
| } | |
| /** | |
| * skb_to_sgvec - Fill a scatter-gather list from a socket buffer | |
| * @skb: Socket buffer containing the buffers to be mapped | |
| * @sg: The scatter-gather list to map into | |
| * @offset: The offset into the buffer's contents to start mapping | |
| * @len: Length of buffer space to be mapped | |
| * | |
| * Fill the specified scatter-gather list with mappings/pointers into a | |
| * region of the buffer space attached to a socket buffer. | |
| */ | |
| static int | |
| __skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) | |
| { | |
| int start = skb_headlen(skb); | |
| int i, copy = start - offset; | |
| int elt = 0; | |
| if (copy > 0) { | |
| if (copy > len) | |
| copy = len; | |
| sg_set_buf(sg, skb->data + offset, copy); | |
| elt++; | |
| if ((len -= copy) == 0) | |
| return elt; | |
| offset += copy; | |
| } | |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | |
| int end; | |
| BUG_TRAP(start <= offset + len); | |
| end = start + skb_shinfo(skb)->frags[i].size; | |
| if ((copy = end - offset) > 0) { | |
| skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; | |
| if (copy > len) | |
| copy = len; | |
| sg_set_page(&sg[elt], frag->page, copy, | |
| frag->page_offset+offset-start); | |
| elt++; | |
| if (!(len -= copy)) | |
| return elt; | |
| offset += copy; | |
| } | |
| start = end; | |
| } | |
| if (skb_shinfo(skb)->frag_list) { | |
| struct sk_buff *list = skb_shinfo(skb)->frag_list; | |
| for (; list; list = list->next) { | |
| int end; | |
| BUG_TRAP(start <= offset + len); | |
| end = start + list->len; | |
| if ((copy = end - offset) > 0) { | |
| if (copy > len) | |
| copy = len; | |
| elt += __skb_to_sgvec(list, sg+elt, offset - start, | |
| copy); | |
| if ((len -= copy) == 0) | |
| return elt; | |
| offset += copy; | |
| } | |
| start = end; | |
| } | |
| } | |
| BUG_ON(len); | |
| return elt; | |
| } | |
| int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) | |
| { | |
| int nsg = __skb_to_sgvec(skb, sg, offset, len); | |
| sg_mark_end(&sg[nsg - 1]); | |
| return nsg; | |
| } | |
| /** | |
| * skb_cow_data - Check that a socket buffer's data buffers are writable | |
| * @skb: The socket buffer to check. | |
| * @tailbits: Amount of trailing space to be added | |
| * @trailer: Returned pointer to the skb where the @tailbits space begins | |
| * | |
| * Make sure that the data buffers attached to a socket buffer are | |
| * writable. If they are not, private copies are made of the data buffers | |
| * and the socket buffer is set to use these instead. | |
| * | |
| * If @tailbits is given, make sure that there is space to write @tailbits | |
| * bytes of data beyond current end of socket buffer. @trailer will be | |
| * set to point to the skb in which this space begins. | |
| * | |
| * The number of scatterlist elements required to completely map the | |
| * COW'd and extended socket buffer will be returned. | |
| */ | |
| int skb_cow_data(struct sk_buff *skb, int tailbits, struct sk_buff **trailer) | |
| { | |
| int copyflag; | |
| int elt; | |
| struct sk_buff *skb1, **skb_p; | |
| /* If skb is cloned or its head is paged, reallocate | |
| * head pulling out all the pages (pages are considered not writable | |
| * at the moment even if they are anonymous). | |
| */ | |
| if ((skb_cloned(skb) || skb_shinfo(skb)->nr_frags) && | |
| __pskb_pull_tail(skb, skb_pagelen(skb)-skb_headlen(skb)) == NULL) | |
| return -ENOMEM; | |
| /* Easy case. Most of packets will go this way. */ | |
| if (!skb_shinfo(skb)->frag_list) { | |
| /* A little of trouble, not enough of space for trailer. | |
| * This should not happen, when stack is tuned to generate | |
| * good frames. OK, on miss we reallocate and reserve even more | |
| * space, 128 bytes is fair. */ | |
| if (skb_tailroom(skb) < tailbits && | |
| pskb_expand_head(skb, 0, tailbits-skb_tailroom(skb)+128, GFP_ATOMIC)) | |
| return -ENOMEM; | |
| /* Voila! */ | |
| *trailer = skb; | |
| return 1; | |
| } | |
| /* Misery. We are in troubles, going to mincer fragments... */ | |
| elt = 1; | |
| skb_p = &skb_shinfo(skb)->frag_list; | |
| copyflag = 0; | |
| while ((skb1 = *skb_p) != NULL) { | |
| int ntail = 0; | |
| /* The fragment is partially pulled by someone, | |
| * this can happen on input. Copy it and everything | |
| * after it. */ | |
| if (skb_shared(skb1)) | |
| copyflag = 1; | |
| /* If the skb is the last, worry about trailer. */ | |
| if (skb1->next == NULL && tailbits) { | |
| if (skb_shinfo(skb1)->nr_frags || | |
| skb_shinfo(skb1)->frag_list || | |
| skb_tailroom(skb1) < tailbits) | |
| ntail = tailbits + 128; | |
| } | |
| if (copyflag || | |
| skb_cloned(skb1) || | |
| ntail || | |
| skb_shinfo(skb1)->nr_frags || | |
| skb_shinfo(skb1)->frag_list) { | |
| struct sk_buff *skb2; | |
| /* Fuck, we are miserable poor guys... */ | |
| if (ntail == 0) | |
| skb2 = skb_copy(skb1, GFP_ATOMIC); | |
| else | |
| skb2 = skb_copy_expand(skb1, | |
| skb_headroom(skb1), | |
| ntail, | |
| GFP_ATOMIC); | |
| if (unlikely(skb2 == NULL)) | |
| return -ENOMEM; | |
| if (skb1->sk) | |
| skb_set_owner_w(skb2, skb1->sk); | |
| /* Looking around. Are we still alive? | |
| * OK, link new skb, drop old one */ | |
| skb2->next = skb1->next; | |
| *skb_p = skb2; | |
| kfree_skb(skb1); | |
| skb1 = skb2; | |
| } | |
| elt++; | |
| *trailer = skb1; | |
| skb_p = &skb1->next; | |
| } | |
| return elt; | |
| } | |
| /** | |
| * skb_partial_csum_set - set up and verify partial csum values for packet | |
| * @skb: the skb to set | |
| * @start: the number of bytes after skb->data to start checksumming. | |
| * @off: the offset from start to place the checksum. | |
| * | |
| * For untrusted partially-checksummed packets, we need to make sure the values | |
| * for skb->csum_start and skb->csum_offset are valid so we don't oops. | |
| * | |
| * This function checks and sets those values and skb->ip_summed: if this | |
| * returns false you should drop the packet. | |
| */ | |
| bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off) | |
| { | |
| if (unlikely(start > skb->len - 2) || | |
| unlikely((int)start + off > skb->len - 2)) { | |
| if (net_ratelimit()) | |
| printk(KERN_WARNING | |
| "bad partial csum: csum=%u/%u len=%u\n", | |
| start, off, skb->len); | |
| return false; | |
| } | |
| skb->ip_summed = CHECKSUM_PARTIAL; | |
| skb->csum_start = skb_headroom(skb) + start; | |
| skb->csum_offset = off; | |
| return true; | |
| } | |
| EXPORT_SYMBOL(___pskb_trim); | |
| EXPORT_SYMBOL(__kfree_skb); | |
| EXPORT_SYMBOL(kfree_skb); | |
| EXPORT_SYMBOL(__pskb_pull_tail); | |
| EXPORT_SYMBOL(__alloc_skb); | |
| EXPORT_SYMBOL(__netdev_alloc_skb); | |
| EXPORT_SYMBOL(pskb_copy); | |
| EXPORT_SYMBOL(pskb_expand_head); | |
| EXPORT_SYMBOL(skb_checksum); | |
| EXPORT_SYMBOL(skb_clone); | |
| EXPORT_SYMBOL(skb_copy); | |
| EXPORT_SYMBOL(skb_copy_and_csum_bits); | |
| EXPORT_SYMBOL(skb_copy_and_csum_dev); | |
| EXPORT_SYMBOL(skb_copy_bits); | |
| EXPORT_SYMBOL(skb_copy_expand); | |
| EXPORT_SYMBOL(skb_over_panic); | |
| EXPORT_SYMBOL(skb_pad); | |
| EXPORT_SYMBOL(skb_realloc_headroom); | |
| EXPORT_SYMBOL(skb_under_panic); | |
| EXPORT_SYMBOL(skb_dequeue); | |
| EXPORT_SYMBOL(skb_dequeue_tail); | |
| EXPORT_SYMBOL(skb_insert); | |
| EXPORT_SYMBOL(skb_queue_purge); | |
| EXPORT_SYMBOL(skb_queue_head); | |
| EXPORT_SYMBOL(skb_queue_tail); | |
| EXPORT_SYMBOL(skb_unlink); | |
| EXPORT_SYMBOL(skb_append); | |
| EXPORT_SYMBOL(skb_split); | |
| EXPORT_SYMBOL(skb_prepare_seq_read); | |
| EXPORT_SYMBOL(skb_seq_read); | |
| EXPORT_SYMBOL(skb_abort_seq_read); | |
| EXPORT_SYMBOL(skb_find_text); | |
| EXPORT_SYMBOL(skb_append_datato_frags); | |
| EXPORT_SYMBOL_GPL(skb_to_sgvec); | |
| EXPORT_SYMBOL_GPL(skb_cow_data); | |
| EXPORT_SYMBOL_GPL(skb_partial_csum_set); |