| /* | |
| * net/sched/gen_estimator.c Simple rate estimator. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| * | |
| * Authors: Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru> | |
| * | |
| * Changes: | |
| * Jamal Hadi Salim - moved it to net/core and reshulfed | |
| * names to make it usable in general net subsystem. | |
| */ | |
| #include <asm/uaccess.h> | |
| #include <asm/system.h> | |
| #include <linux/bitops.h> | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/kernel.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/string.h> | |
| #include <linux/mm.h> | |
| #include <linux/socket.h> | |
| #include <linux/sockios.h> | |
| #include <linux/in.h> | |
| #include <linux/errno.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/init.h> | |
| #include <net/sock.h> | |
| #include <net/gen_stats.h> | |
| /* | |
| This code is NOT intended to be used for statistics collection, | |
| its purpose is to provide a base for statistical multiplexing | |
| for controlled load service. | |
| If you need only statistics, run a user level daemon which | |
| periodically reads byte counters. | |
| Unfortunately, rate estimation is not a very easy task. | |
| F.e. I did not find a simple way to estimate the current peak rate | |
| and even failed to formulate the problem 8)8) | |
| So I preferred not to built an estimator into the scheduler, | |
| but run this task separately. | |
| Ideally, it should be kernel thread(s), but for now it runs | |
| from timers, which puts apparent top bounds on the number of rated | |
| flows, has minimal overhead on small, but is enough | |
| to handle controlled load service, sets of aggregates. | |
| We measure rate over A=(1<<interval) seconds and evaluate EWMA: | |
| avrate = avrate*(1-W) + rate*W | |
| where W is chosen as negative power of 2: W = 2^(-ewma_log) | |
| The resulting time constant is: | |
| T = A/(-ln(1-W)) | |
| NOTES. | |
| * The stored value for avbps is scaled by 2^5, so that maximal | |
| rate is ~1Gbit, avpps is scaled by 2^10. | |
| * Minimal interval is HZ/4=250msec (it is the greatest common divisor | |
| for HZ=100 and HZ=1024 8)), maximal interval | |
| is (HZ*2^EST_MAX_INTERVAL)/4 = 8sec. Shorter intervals | |
| are too expensive, longer ones can be implemented | |
| at user level painlessly. | |
| */ | |
| #define EST_MAX_INTERVAL 5 | |
| struct gen_estimator | |
| { | |
| struct list_head list; | |
| struct gnet_stats_basic *bstats; | |
| struct gnet_stats_rate_est *rate_est; | |
| spinlock_t *stats_lock; | |
| int ewma_log; | |
| u64 last_bytes; | |
| u32 last_packets; | |
| u32 avpps; | |
| u32 avbps; | |
| struct rcu_head e_rcu; | |
| }; | |
| struct gen_estimator_head | |
| { | |
| struct timer_list timer; | |
| struct list_head list; | |
| }; | |
| static struct gen_estimator_head elist[EST_MAX_INTERVAL+1]; | |
| /* Protects against NULL dereference */ | |
| static DEFINE_RWLOCK(est_lock); | |
| static void est_timer(unsigned long arg) | |
| { | |
| int idx = (int)arg; | |
| struct gen_estimator *e; | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(e, &elist[idx].list, list) { | |
| u64 nbytes; | |
| u32 npackets; | |
| u32 rate; | |
| spin_lock(e->stats_lock); | |
| read_lock(&est_lock); | |
| if (e->bstats == NULL) | |
| goto skip; | |
| nbytes = e->bstats->bytes; | |
| npackets = e->bstats->packets; | |
| rate = (nbytes - e->last_bytes)<<(7 - idx); | |
| e->last_bytes = nbytes; | |
| e->avbps += ((long)rate - (long)e->avbps) >> e->ewma_log; | |
| e->rate_est->bps = (e->avbps+0xF)>>5; | |
| rate = (npackets - e->last_packets)<<(12 - idx); | |
| e->last_packets = npackets; | |
| e->avpps += ((long)rate - (long)e->avpps) >> e->ewma_log; | |
| e->rate_est->pps = (e->avpps+0x1FF)>>10; | |
| skip: | |
| read_unlock(&est_lock); | |
| spin_unlock(e->stats_lock); | |
| } | |
| if (!list_empty(&elist[idx].list)) | |
| mod_timer(&elist[idx].timer, jiffies + ((HZ/4) << idx)); | |
| rcu_read_unlock(); | |
| } | |
| /** | |
| * gen_new_estimator - create a new rate estimator | |
| * @bstats: basic statistics | |
| * @rate_est: rate estimator statistics | |
| * @stats_lock: statistics lock | |
| * @opt: rate estimator configuration TLV | |
| * | |
| * Creates a new rate estimator with &bstats as source and &rate_est | |
| * as destination. A new timer with the interval specified in the | |
| * configuration TLV is created. Upon each interval, the latest statistics | |
| * will be read from &bstats and the estimated rate will be stored in | |
| * &rate_est with the statistics lock grabed during this period. | |
| * | |
| * Returns 0 on success or a negative error code. | |
| * | |
| * NOTE: Called under rtnl_mutex | |
| */ | |
| int gen_new_estimator(struct gnet_stats_basic *bstats, | |
| struct gnet_stats_rate_est *rate_est, | |
| spinlock_t *stats_lock, | |
| struct nlattr *opt) | |
| { | |
| struct gen_estimator *est; | |
| struct gnet_estimator *parm = nla_data(opt); | |
| int idx; | |
| if (nla_len(opt) < sizeof(*parm)) | |
| return -EINVAL; | |
| if (parm->interval < -2 || parm->interval > 3) | |
| return -EINVAL; | |
| est = kzalloc(sizeof(*est), GFP_KERNEL); | |
| if (est == NULL) | |
| return -ENOBUFS; | |
| idx = parm->interval + 2; | |
| est->bstats = bstats; | |
| est->rate_est = rate_est; | |
| est->stats_lock = stats_lock; | |
| est->ewma_log = parm->ewma_log; | |
| est->last_bytes = bstats->bytes; | |
| est->avbps = rate_est->bps<<5; | |
| est->last_packets = bstats->packets; | |
| est->avpps = rate_est->pps<<10; | |
| if (!elist[idx].timer.function) { | |
| INIT_LIST_HEAD(&elist[idx].list); | |
| setup_timer(&elist[idx].timer, est_timer, idx); | |
| } | |
| if (list_empty(&elist[idx].list)) | |
| mod_timer(&elist[idx].timer, jiffies + ((HZ/4) << idx)); | |
| list_add_rcu(&est->list, &elist[idx].list); | |
| return 0; | |
| } | |
| static void __gen_kill_estimator(struct rcu_head *head) | |
| { | |
| struct gen_estimator *e = container_of(head, | |
| struct gen_estimator, e_rcu); | |
| kfree(e); | |
| } | |
| /** | |
| * gen_kill_estimator - remove a rate estimator | |
| * @bstats: basic statistics | |
| * @rate_est: rate estimator statistics | |
| * | |
| * Removes the rate estimator specified by &bstats and &rate_est | |
| * and deletes the timer. | |
| * | |
| * NOTE: Called under rtnl_mutex | |
| */ | |
| void gen_kill_estimator(struct gnet_stats_basic *bstats, | |
| struct gnet_stats_rate_est *rate_est) | |
| { | |
| int idx; | |
| struct gen_estimator *e, *n; | |
| for (idx=0; idx <= EST_MAX_INTERVAL; idx++) { | |
| /* Skip non initialized indexes */ | |
| if (!elist[idx].timer.function) | |
| continue; | |
| list_for_each_entry_safe(e, n, &elist[idx].list, list) { | |
| if (e->rate_est != rate_est || e->bstats != bstats) | |
| continue; | |
| write_lock_bh(&est_lock); | |
| e->bstats = NULL; | |
| write_unlock_bh(&est_lock); | |
| list_del_rcu(&e->list); | |
| call_rcu(&e->e_rcu, __gen_kill_estimator); | |
| } | |
| } | |
| } | |
| /** | |
| * gen_replace_estimator - replace rate estimator configuration | |
| * @bstats: basic statistics | |
| * @rate_est: rate estimator statistics | |
| * @stats_lock: statistics lock | |
| * @opt: rate estimator configuration TLV | |
| * | |
| * Replaces the configuration of a rate estimator by calling | |
| * gen_kill_estimator() and gen_new_estimator(). | |
| * | |
| * Returns 0 on success or a negative error code. | |
| */ | |
| int gen_replace_estimator(struct gnet_stats_basic *bstats, | |
| struct gnet_stats_rate_est *rate_est, | |
| spinlock_t *stats_lock, struct nlattr *opt) | |
| { | |
| gen_kill_estimator(bstats, rate_est); | |
| return gen_new_estimator(bstats, rate_est, stats_lock, opt); | |
| } | |
| EXPORT_SYMBOL(gen_kill_estimator); | |
| EXPORT_SYMBOL(gen_new_estimator); | |
| EXPORT_SYMBOL(gen_replace_estimator); |