| /* | |
| * linux/kernel/irq/spurious.c | |
| * | |
| * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar | |
| * | |
| * This file contains spurious interrupt handling. | |
| */ | |
| #include <linux/jiffies.h> | |
| #include <linux/irq.h> | |
| #include <linux/module.h> | |
| #include <linux/kallsyms.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/moduleparam.h> | |
| static int irqfixup __read_mostly; | |
| /* | |
| * Recovery handler for misrouted interrupts. | |
| */ | |
| static int misrouted_irq(int irq) | |
| { | |
| int i; | |
| int ok = 0; | |
| int work = 0; /* Did we do work for a real IRQ */ | |
| for (i = 1; i < NR_IRQS; i++) { | |
| struct irq_desc *desc = irq_desc + i; | |
| struct irqaction *action; | |
| if (i == irq) /* Already tried */ | |
| continue; | |
| spin_lock(&desc->lock); | |
| /* Already running on another processor */ | |
| if (desc->status & IRQ_INPROGRESS) { | |
| /* | |
| * Already running: If it is shared get the other | |
| * CPU to go looking for our mystery interrupt too | |
| */ | |
| if (desc->action && (desc->action->flags & IRQF_SHARED)) | |
| desc->status |= IRQ_PENDING; | |
| spin_unlock(&desc->lock); | |
| continue; | |
| } | |
| /* Honour the normal IRQ locking */ | |
| desc->status |= IRQ_INPROGRESS; | |
| action = desc->action; | |
| spin_unlock(&desc->lock); | |
| while (action) { | |
| /* Only shared IRQ handlers are safe to call */ | |
| if (action->flags & IRQF_SHARED) { | |
| if (action->handler(i, action->dev_id) == | |
| IRQ_HANDLED) | |
| ok = 1; | |
| } | |
| action = action->next; | |
| } | |
| local_irq_disable(); | |
| /* Now clean up the flags */ | |
| spin_lock(&desc->lock); | |
| action = desc->action; | |
| /* | |
| * While we were looking for a fixup someone queued a real | |
| * IRQ clashing with our walk: | |
| */ | |
| while ((desc->status & IRQ_PENDING) && action) { | |
| /* | |
| * Perform real IRQ processing for the IRQ we deferred | |
| */ | |
| work = 1; | |
| spin_unlock(&desc->lock); | |
| handle_IRQ_event(i, action); | |
| spin_lock(&desc->lock); | |
| desc->status &= ~IRQ_PENDING; | |
| } | |
| desc->status &= ~IRQ_INPROGRESS; | |
| /* | |
| * If we did actual work for the real IRQ line we must let the | |
| * IRQ controller clean up too | |
| */ | |
| if (work && desc->chip && desc->chip->end) | |
| desc->chip->end(i); | |
| spin_unlock(&desc->lock); | |
| } | |
| /* So the caller can adjust the irq error counts */ | |
| return ok; | |
| } | |
| /* | |
| * If 99,900 of the previous 100,000 interrupts have not been handled | |
| * then assume that the IRQ is stuck in some manner. Drop a diagnostic | |
| * and try to turn the IRQ off. | |
| * | |
| * (The other 100-of-100,000 interrupts may have been a correctly | |
| * functioning device sharing an IRQ with the failing one) | |
| * | |
| * Called under desc->lock | |
| */ | |
| static void | |
| __report_bad_irq(unsigned int irq, struct irq_desc *desc, | |
| irqreturn_t action_ret) | |
| { | |
| struct irqaction *action; | |
| if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) { | |
| printk(KERN_ERR "irq event %d: bogus return value %x\n", | |
| irq, action_ret); | |
| } else { | |
| printk(KERN_ERR "irq %d: nobody cared (try booting with " | |
| "the \"irqpoll\" option)\n", irq); | |
| } | |
| dump_stack(); | |
| printk(KERN_ERR "handlers:\n"); | |
| action = desc->action; | |
| while (action) { | |
| printk(KERN_ERR "[<%p>]", action->handler); | |
| print_symbol(" (%s)", | |
| (unsigned long)action->handler); | |
| printk("\n"); | |
| action = action->next; | |
| } | |
| } | |
| static void | |
| report_bad_irq(unsigned int irq, struct irq_desc *desc, irqreturn_t action_ret) | |
| { | |
| static int count = 100; | |
| if (count > 0) { | |
| count--; | |
| __report_bad_irq(irq, desc, action_ret); | |
| } | |
| } | |
| static inline int try_misrouted_irq(unsigned int irq, struct irq_desc *desc, irqreturn_t action_ret) | |
| { | |
| struct irqaction *action; | |
| if (!irqfixup) | |
| return 0; | |
| /* We didn't actually handle the IRQ - see if it was misrouted? */ | |
| if (action_ret == IRQ_NONE) | |
| return 1; | |
| /* | |
| * But for 'irqfixup == 2' we also do it for handled interrupts if | |
| * they are marked as IRQF_IRQPOLL (or for irq zero, which is the | |
| * traditional PC timer interrupt.. Legacy) | |
| */ | |
| if (irqfixup < 2) | |
| return 0; | |
| if (!irq) | |
| return 1; | |
| /* | |
| * Since we don't get the descriptor lock, "action" can | |
| * change under us. We don't really care, but we don't | |
| * want to follow a NULL pointer. So tell the compiler to | |
| * just load it once by using a barrier. | |
| */ | |
| action = desc->action; | |
| barrier(); | |
| return action && (action->flags & IRQF_IRQPOLL); | |
| } | |
| void note_interrupt(unsigned int irq, struct irq_desc *desc, | |
| irqreturn_t action_ret) | |
| { | |
| if (unlikely(action_ret != IRQ_HANDLED)) { | |
| /* | |
| * If we are seeing only the odd spurious IRQ caused by | |
| * bus asynchronicity then don't eventually trigger an error, | |
| * otherwise the couter becomes a doomsday timer for otherwise | |
| * working systems | |
| */ | |
| if (time_after(jiffies, desc->last_unhandled + HZ/10)) | |
| desc->irqs_unhandled = 1; | |
| else | |
| desc->irqs_unhandled++; | |
| desc->last_unhandled = jiffies; | |
| if (unlikely(action_ret != IRQ_NONE)) | |
| report_bad_irq(irq, desc, action_ret); | |
| } | |
| if (unlikely(try_misrouted_irq(irq, desc, action_ret))) { | |
| int ok = misrouted_irq(irq); | |
| if (action_ret == IRQ_NONE) | |
| desc->irqs_unhandled -= ok; | |
| } | |
| desc->irq_count++; | |
| if (likely(desc->irq_count < 100000)) | |
| return; | |
| desc->irq_count = 0; | |
| if (unlikely(desc->irqs_unhandled > 99900)) { | |
| /* | |
| * The interrupt is stuck | |
| */ | |
| __report_bad_irq(irq, desc, action_ret); | |
| /* | |
| * Now kill the IRQ | |
| */ | |
| printk(KERN_EMERG "Disabling IRQ #%d\n", irq); | |
| desc->status |= IRQ_DISABLED | IRQ_SPURIOUS_DISABLED; | |
| desc->depth++; | |
| desc->chip->disable(irq); | |
| } | |
| desc->irqs_unhandled = 0; | |
| } | |
| int noirqdebug __read_mostly; | |
| int noirqdebug_setup(char *str) | |
| { | |
| noirqdebug = 1; | |
| printk(KERN_INFO "IRQ lockup detection disabled\n"); | |
| return 1; | |
| } | |
| __setup("noirqdebug", noirqdebug_setup); | |
| module_param(noirqdebug, bool, 0644); | |
| MODULE_PARM_DESC(noirqdebug, "Disable irq lockup detection when true"); | |
| static int __init irqfixup_setup(char *str) | |
| { | |
| irqfixup = 1; | |
| printk(KERN_WARNING "Misrouted IRQ fixup support enabled.\n"); | |
| printk(KERN_WARNING "This may impact system performance.\n"); | |
| return 1; | |
| } | |
| __setup("irqfixup", irqfixup_setup); | |
| module_param(irqfixup, int, 0644); | |
| MODULE_PARM_DESC("irqfixup", "0: No fixup, 1: irqfixup mode 2: irqpoll mode"); | |
| static int __init irqpoll_setup(char *str) | |
| { | |
| irqfixup = 2; | |
| printk(KERN_WARNING "Misrouted IRQ fixup and polling support " | |
| "enabled\n"); | |
| printk(KERN_WARNING "This may significantly impact system " | |
| "performance\n"); | |
| return 1; | |
| } | |
| __setup("irqpoll", irqpoll_setup); |