| #ifndef _SCSI_SCSI_DEVICE_H | |
| #define _SCSI_SCSI_DEVICE_H | |
| #include <linux/device.h> | |
| #include <linux/list.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/blkdev.h> | |
| #include <asm/atomic.h> | |
| struct request_queue; | |
| struct scsi_cmnd; | |
| struct scsi_lun; | |
| struct scsi_sense_hdr; | |
| struct scsi_mode_data { | |
| __u32 length; | |
| __u16 block_descriptor_length; | |
| __u8 medium_type; | |
| __u8 device_specific; | |
| __u8 header_length; | |
| __u8 longlba:1; | |
| }; | |
| /* | |
| * sdev state: If you alter this, you also need to alter scsi_sysfs.c | |
| * (for the ascii descriptions) and the state model enforcer: | |
| * scsi_lib:scsi_device_set_state(). | |
| */ | |
| enum scsi_device_state { | |
| SDEV_CREATED = 1, /* device created but not added to sysfs | |
| * Only internal commands allowed (for inq) */ | |
| SDEV_RUNNING, /* device properly configured | |
| * All commands allowed */ | |
| SDEV_CANCEL, /* beginning to delete device | |
| * Only error handler commands allowed */ | |
| SDEV_DEL, /* device deleted | |
| * no commands allowed */ | |
| SDEV_QUIESCE, /* Device quiescent. No block commands | |
| * will be accepted, only specials (which | |
| * originate in the mid-layer) */ | |
| SDEV_OFFLINE, /* Device offlined (by error handling or | |
| * user request */ | |
| SDEV_BLOCK, /* Device blocked by scsi lld. No scsi | |
| * commands from user or midlayer should be issued | |
| * to the scsi lld. */ | |
| }; | |
| enum scsi_device_event { | |
| SDEV_EVT_MEDIA_CHANGE = 1, /* media has changed */ | |
| SDEV_EVT_LAST = SDEV_EVT_MEDIA_CHANGE, | |
| SDEV_EVT_MAXBITS = SDEV_EVT_LAST + 1 | |
| }; | |
| struct scsi_event { | |
| enum scsi_device_event evt_type; | |
| struct list_head node; | |
| /* put union of data structures, for non-simple event types, | |
| * here | |
| */ | |
| }; | |
| struct scsi_device { | |
| struct Scsi_Host *host; | |
| struct request_queue *request_queue; | |
| /* the next two are protected by the host->host_lock */ | |
| struct list_head siblings; /* list of all devices on this host */ | |
| struct list_head same_target_siblings; /* just the devices sharing same target id */ | |
| /* this is now protected by the request_queue->queue_lock */ | |
| unsigned int device_busy; /* commands actually active on | |
| * low-level. protected by queue_lock. */ | |
| spinlock_t list_lock; | |
| struct list_head cmd_list; /* queue of in use SCSI Command structures */ | |
| struct list_head starved_entry; | |
| struct scsi_cmnd *current_cmnd; /* currently active command */ | |
| unsigned short queue_depth; /* How deep of a queue we want */ | |
| unsigned short last_queue_full_depth; /* These two are used by */ | |
| unsigned short last_queue_full_count; /* scsi_track_queue_full() */ | |
| unsigned long last_queue_full_time;/* don't let QUEUE_FULLs on the same | |
| jiffie count on our counter, they | |
| could all be from the same event. */ | |
| unsigned int id, lun, channel; | |
| unsigned int manufacturer; /* Manufacturer of device, for using | |
| * vendor-specific cmd's */ | |
| unsigned sector_size; /* size in bytes */ | |
| void *hostdata; /* available to low-level driver */ | |
| char type; | |
| char scsi_level; | |
| char inq_periph_qual; /* PQ from INQUIRY data */ | |
| unsigned char inquiry_len; /* valid bytes in 'inquiry' */ | |
| unsigned char * inquiry; /* INQUIRY response data */ | |
| const char * vendor; /* [back_compat] point into 'inquiry' ... */ | |
| const char * model; /* ... after scan; point to static string */ | |
| const char * rev; /* ... "nullnullnullnull" before scan */ | |
| unsigned char current_tag; /* current tag */ | |
| struct scsi_target *sdev_target; /* used only for single_lun */ | |
| unsigned int sdev_bflags; /* black/white flags as also found in | |
| * scsi_devinfo.[hc]. For now used only to | |
| * pass settings from slave_alloc to scsi | |
| * core. */ | |
| unsigned writeable:1; | |
| unsigned removable:1; | |
| unsigned changed:1; /* Data invalid due to media change */ | |
| unsigned busy:1; /* Used to prevent races */ | |
| unsigned lockable:1; /* Able to prevent media removal */ | |
| unsigned locked:1; /* Media removal disabled */ | |
| unsigned borken:1; /* Tell the Seagate driver to be | |
| * painfully slow on this device */ | |
| unsigned disconnect:1; /* can disconnect */ | |
| unsigned soft_reset:1; /* Uses soft reset option */ | |
| unsigned sdtr:1; /* Device supports SDTR messages */ | |
| unsigned wdtr:1; /* Device supports WDTR messages */ | |
| unsigned ppr:1; /* Device supports PPR messages */ | |
| unsigned tagged_supported:1; /* Supports SCSI-II tagged queuing */ | |
| unsigned simple_tags:1; /* simple queue tag messages are enabled */ | |
| unsigned ordered_tags:1;/* ordered queue tag messages are enabled */ | |
| unsigned was_reset:1; /* There was a bus reset on the bus for | |
| * this device */ | |
| unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN | |
| * because we did a bus reset. */ | |
| unsigned use_10_for_rw:1; /* first try 10-byte read / write */ | |
| unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */ | |
| unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */ | |
| unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */ | |
| unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */ | |
| unsigned no_start_on_add:1; /* do not issue start on add */ | |
| unsigned allow_restart:1; /* issue START_UNIT in error handler */ | |
| unsigned manage_start_stop:1; /* Let HLD (sd) manage start/stop */ | |
| unsigned no_uld_attach:1; /* disable connecting to upper level drivers */ | |
| unsigned select_no_atn:1; | |
| unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */ | |
| unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */ | |
| unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */ | |
| unsigned last_sector_bug:1; /* Always read last sector in a 1 sector read */ | |
| DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */ | |
| struct list_head event_list; /* asserted events */ | |
| struct work_struct event_work; | |
| unsigned int device_blocked; /* Device returned QUEUE_FULL. */ | |
| unsigned int max_device_blocked; /* what device_blocked counts down from */ | |
| #define SCSI_DEFAULT_DEVICE_BLOCKED 3 | |
| atomic_t iorequest_cnt; | |
| atomic_t iodone_cnt; | |
| atomic_t ioerr_cnt; | |
| int timeout; | |
| struct device sdev_gendev, | |
| sdev_dev; | |
| struct execute_work ew; /* used to get process context on put */ | |
| enum scsi_device_state sdev_state; | |
| unsigned long sdev_data[0]; | |
| } __attribute__((aligned(sizeof(unsigned long)))); | |
| #define to_scsi_device(d) \ | |
| container_of(d, struct scsi_device, sdev_gendev) | |
| #define class_to_sdev(d) \ | |
| container_of(d, struct scsi_device, sdev_dev) | |
| #define transport_class_to_sdev(class_dev) \ | |
| to_scsi_device(class_dev->parent) | |
| #define sdev_printk(prefix, sdev, fmt, a...) \ | |
| dev_printk(prefix, &(sdev)->sdev_gendev, fmt, ##a) | |
| #define scmd_printk(prefix, scmd, fmt, a...) \ | |
| (scmd)->request->rq_disk ? \ | |
| sdev_printk(prefix, (scmd)->device, "[%s] " fmt, \ | |
| (scmd)->request->rq_disk->disk_name, ##a) : \ | |
| sdev_printk(prefix, (scmd)->device, fmt, ##a) | |
| enum scsi_target_state { | |
| STARGET_CREATED = 1, | |
| STARGET_RUNNING, | |
| STARGET_DEL, | |
| }; | |
| /* | |
| * scsi_target: representation of a scsi target, for now, this is only | |
| * used for single_lun devices. If no one has active IO to the target, | |
| * starget_sdev_user is NULL, else it points to the active sdev. | |
| */ | |
| struct scsi_target { | |
| struct scsi_device *starget_sdev_user; | |
| struct list_head siblings; | |
| struct list_head devices; | |
| struct device dev; | |
| unsigned int reap_ref; /* protected by the host lock */ | |
| unsigned int channel; | |
| unsigned int id; /* target id ... replace | |
| * scsi_device.id eventually */ | |
| unsigned int create:1; /* signal that it needs to be added */ | |
| unsigned int single_lun:1; /* Indicates we should only | |
| * allow I/O to one of the luns | |
| * for the device at a time. */ | |
| unsigned int pdt_1f_for_no_lun; /* PDT = 0x1f */ | |
| /* means no lun present */ | |
| char scsi_level; | |
| struct execute_work ew; | |
| enum scsi_target_state state; | |
| void *hostdata; /* available to low-level driver */ | |
| unsigned long starget_data[0]; /* for the transport */ | |
| /* starget_data must be the last element!!!! */ | |
| } __attribute__((aligned(sizeof(unsigned long)))); | |
| #define to_scsi_target(d) container_of(d, struct scsi_target, dev) | |
| static inline struct scsi_target *scsi_target(struct scsi_device *sdev) | |
| { | |
| return to_scsi_target(sdev->sdev_gendev.parent); | |
| } | |
| #define transport_class_to_starget(class_dev) \ | |
| to_scsi_target(class_dev->parent) | |
| #define starget_printk(prefix, starget, fmt, a...) \ | |
| dev_printk(prefix, &(starget)->dev, fmt, ##a) | |
| extern struct scsi_device *__scsi_add_device(struct Scsi_Host *, | |
| uint, uint, uint, void *hostdata); | |
| extern int scsi_add_device(struct Scsi_Host *host, uint channel, | |
| uint target, uint lun); | |
| extern void scsi_remove_device(struct scsi_device *); | |
| extern int scsi_device_get(struct scsi_device *); | |
| extern void scsi_device_put(struct scsi_device *); | |
| extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *, | |
| uint, uint, uint); | |
| extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *, | |
| uint, uint, uint); | |
| extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *, | |
| uint); | |
| extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *, | |
| uint); | |
| extern void starget_for_each_device(struct scsi_target *, void *, | |
| void (*fn)(struct scsi_device *, void *)); | |
| extern void __starget_for_each_device(struct scsi_target *, void *, | |
| void (*fn)(struct scsi_device *, | |
| void *)); | |
| /* only exposed to implement shost_for_each_device */ | |
| extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *, | |
| struct scsi_device *); | |
| /** | |
| * shost_for_each_device - iterate over all devices of a host | |
| * @sdev: the &struct scsi_device to use as a cursor | |
| * @shost: the &struct scsi_host to iterate over | |
| * | |
| * Iterator that returns each device attached to @shost. This loop | |
| * takes a reference on each device and releases it at the end. If | |
| * you break out of the loop, you must call scsi_device_put(sdev). | |
| */ | |
| #define shost_for_each_device(sdev, shost) \ | |
| for ((sdev) = __scsi_iterate_devices((shost), NULL); \ | |
| (sdev); \ | |
| (sdev) = __scsi_iterate_devices((shost), (sdev))) | |
| /** | |
| * __shost_for_each_device - iterate over all devices of a host (UNLOCKED) | |
| * @sdev: the &struct scsi_device to use as a cursor | |
| * @shost: the &struct scsi_host to iterate over | |
| * | |
| * Iterator that returns each device attached to @shost. It does _not_ | |
| * take a reference on the scsi_device, so the whole loop must be | |
| * protected by shost->host_lock. | |
| * | |
| * Note: The only reason to use this is because you need to access the | |
| * device list in interrupt context. Otherwise you really want to use | |
| * shost_for_each_device instead. | |
| */ | |
| #define __shost_for_each_device(sdev, shost) \ | |
| list_for_each_entry((sdev), &((shost)->__devices), siblings) | |
| extern void scsi_adjust_queue_depth(struct scsi_device *, int, int); | |
| extern int scsi_track_queue_full(struct scsi_device *, int); | |
| extern int scsi_set_medium_removal(struct scsi_device *, char); | |
| extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, | |
| unsigned char *buffer, int len, int timeout, | |
| int retries, struct scsi_mode_data *data, | |
| struct scsi_sense_hdr *); | |
| extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp, | |
| int modepage, unsigned char *buffer, int len, | |
| int timeout, int retries, | |
| struct scsi_mode_data *data, | |
| struct scsi_sense_hdr *); | |
| extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout, | |
| int retries, struct scsi_sense_hdr *sshdr); | |
| extern int scsi_device_set_state(struct scsi_device *sdev, | |
| enum scsi_device_state state); | |
| extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type, | |
| gfp_t gfpflags); | |
| extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt); | |
| extern void sdev_evt_send_simple(struct scsi_device *sdev, | |
| enum scsi_device_event evt_type, gfp_t gfpflags); | |
| extern int scsi_device_quiesce(struct scsi_device *sdev); | |
| extern void scsi_device_resume(struct scsi_device *sdev); | |
| extern void scsi_target_quiesce(struct scsi_target *); | |
| extern void scsi_target_resume(struct scsi_target *); | |
| extern void scsi_scan_target(struct device *parent, unsigned int channel, | |
| unsigned int id, unsigned int lun, int rescan); | |
| extern void scsi_target_reap(struct scsi_target *); | |
| extern void scsi_target_block(struct device *); | |
| extern void scsi_target_unblock(struct device *); | |
| extern void scsi_remove_target(struct device *); | |
| extern void int_to_scsilun(unsigned int, struct scsi_lun *); | |
| extern int scsilun_to_int(struct scsi_lun *); | |
| extern const char *scsi_device_state_name(enum scsi_device_state); | |
| extern int scsi_is_sdev_device(const struct device *); | |
| extern int scsi_is_target_device(const struct device *); | |
| extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, | |
| int data_direction, void *buffer, unsigned bufflen, | |
| unsigned char *sense, int timeout, int retries, | |
| int flag); | |
| extern int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd, | |
| int data_direction, void *buffer, unsigned bufflen, | |
| struct scsi_sense_hdr *, int timeout, int retries); | |
| extern int scsi_execute_async(struct scsi_device *sdev, | |
| const unsigned char *cmd, int cmd_len, int data_direction, | |
| void *buffer, unsigned bufflen, int use_sg, | |
| int timeout, int retries, void *privdata, | |
| void (*done)(void *, char *, int, int), | |
| gfp_t gfp); | |
| static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev) | |
| { | |
| return device_reprobe(&sdev->sdev_gendev); | |
| } | |
| static inline unsigned int sdev_channel(struct scsi_device *sdev) | |
| { | |
| return sdev->channel; | |
| } | |
| static inline unsigned int sdev_id(struct scsi_device *sdev) | |
| { | |
| return sdev->id; | |
| } | |
| #define scmd_id(scmd) sdev_id((scmd)->device) | |
| #define scmd_channel(scmd) sdev_channel((scmd)->device) | |
| static inline int scsi_device_online(struct scsi_device *sdev) | |
| { | |
| return sdev->sdev_state != SDEV_OFFLINE; | |
| } | |
| /* accessor functions for the SCSI parameters */ | |
| static inline int scsi_device_sync(struct scsi_device *sdev) | |
| { | |
| return sdev->sdtr; | |
| } | |
| static inline int scsi_device_wide(struct scsi_device *sdev) | |
| { | |
| return sdev->wdtr; | |
| } | |
| static inline int scsi_device_dt(struct scsi_device *sdev) | |
| { | |
| return sdev->ppr; | |
| } | |
| static inline int scsi_device_dt_only(struct scsi_device *sdev) | |
| { | |
| if (sdev->inquiry_len < 57) | |
| return 0; | |
| return (sdev->inquiry[56] & 0x0c) == 0x04; | |
| } | |
| static inline int scsi_device_ius(struct scsi_device *sdev) | |
| { | |
| if (sdev->inquiry_len < 57) | |
| return 0; | |
| return sdev->inquiry[56] & 0x01; | |
| } | |
| static inline int scsi_device_qas(struct scsi_device *sdev) | |
| { | |
| if (sdev->inquiry_len < 57) | |
| return 0; | |
| return sdev->inquiry[56] & 0x02; | |
| } | |
| static inline int scsi_device_enclosure(struct scsi_device *sdev) | |
| { | |
| return sdev->inquiry[6] & (1<<6); | |
| } | |
| #define MODULE_ALIAS_SCSI_DEVICE(type) \ | |
| MODULE_ALIAS("scsi:t-" __stringify(type) "*") | |
| #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x" | |
| #endif /* _SCSI_SCSI_DEVICE_H */ |