| #ifndef __SPARC_SYSTEM_H | |
| #define __SPARC_SYSTEM_H | |
| #include <linux/kernel.h> | |
| #include <linux/threads.h> /* NR_CPUS */ | |
| #include <linux/thread_info.h> | |
| #include <asm/page.h> | |
| #include <asm/psr.h> | |
| #include <asm/ptrace.h> | |
| #include <asm/btfixup.h> | |
| #include <asm/smp.h> | |
| #ifndef __ASSEMBLY__ | |
| #include <linux/irqflags.h> | |
| /* | |
| * Sparc (general) CPU types | |
| */ | |
| enum sparc_cpu { | |
| sun4 = 0x00, | |
| sun4c = 0x01, | |
| sun4m = 0x02, | |
| sun4d = 0x03, | |
| sun4e = 0x04, | |
| sun4u = 0x05, /* V8 ploos ploos */ | |
| sun_unknown = 0x06, | |
| ap1000 = 0x07, /* almost a sun4m */ | |
| }; | |
| /* Really, userland should not be looking at any of this... */ | |
| #ifdef __KERNEL__ | |
| extern enum sparc_cpu sparc_cpu_model; | |
| #ifndef CONFIG_SUN4 | |
| #define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c) | |
| #define ARCH_SUN4 0 | |
| #else | |
| #define ARCH_SUN4C_SUN4 1 | |
| #define ARCH_SUN4 1 | |
| #endif | |
| #define SUN4M_NCPUS 4 /* Architectural limit of sun4m. */ | |
| extern char reboot_command[]; | |
| extern struct thread_info *current_set[NR_CPUS]; | |
| extern unsigned long empty_bad_page; | |
| extern unsigned long empty_bad_page_table; | |
| extern unsigned long empty_zero_page; | |
| extern void sun_do_break(void); | |
| extern int serial_console; | |
| extern int stop_a_enabled; | |
| static inline int con_is_present(void) | |
| { | |
| return serial_console ? 0 : 1; | |
| } | |
| /* When a context switch happens we must flush all user windows so that | |
| * the windows of the current process are flushed onto its stack. This | |
| * way the windows are all clean for the next process and the stack | |
| * frames are up to date. | |
| */ | |
| extern void flush_user_windows(void); | |
| extern void kill_user_windows(void); | |
| extern void synchronize_user_stack(void); | |
| extern void fpsave(unsigned long *fpregs, unsigned long *fsr, | |
| void *fpqueue, unsigned long *fpqdepth); | |
| #ifdef CONFIG_SMP | |
| #define SWITCH_ENTER(prv) \ | |
| do { \ | |
| if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \ | |
| put_psr(get_psr() | PSR_EF); \ | |
| fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \ | |
| &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \ | |
| clear_tsk_thread_flag(prv, TIF_USEDFPU); \ | |
| (prv)->thread.kregs->psr &= ~PSR_EF; \ | |
| } \ | |
| } while(0) | |
| #define SWITCH_DO_LAZY_FPU(next) /* */ | |
| #else | |
| #define SWITCH_ENTER(prv) /* */ | |
| #define SWITCH_DO_LAZY_FPU(nxt) \ | |
| do { \ | |
| if (last_task_used_math != (nxt)) \ | |
| (nxt)->thread.kregs->psr&=~PSR_EF; \ | |
| } while(0) | |
| #endif | |
| extern void flushw_all(void); | |
| /* | |
| * Flush windows so that the VM switch which follows | |
| * would not pull the stack from under us. | |
| * | |
| * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work) | |
| * XXX WTF is the above comment? Found in late teen 2.4.x. | |
| */ | |
| #define prepare_arch_switch(next) do { \ | |
| __asm__ __volatile__( \ | |
| ".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \ | |
| "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \ | |
| "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \ | |
| "save %sp, -0x40, %sp\n\t" \ | |
| "restore; restore; restore; restore; restore; restore; restore"); \ | |
| } while(0) | |
| /* Much care has gone into this code, do not touch it. | |
| * | |
| * We need to loadup regs l0/l1 for the newly forked child | |
| * case because the trap return path relies on those registers | |
| * holding certain values, gcc is told that they are clobbered. | |
| * Gcc needs registers for 3 values in and 1 value out, so we | |
| * clobber every non-fixed-usage register besides l2/l3/o4/o5. -DaveM | |
| * | |
| * Hey Dave, that do not touch sign is too much of an incentive | |
| * - Anton & Pete | |
| */ | |
| #define switch_to(prev, next, last) do { \ | |
| SWITCH_ENTER(prev); \ | |
| SWITCH_DO_LAZY_FPU(next); \ | |
| cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask); \ | |
| __asm__ __volatile__( \ | |
| "sethi %%hi(here - 0x8), %%o7\n\t" \ | |
| "mov %%g6, %%g3\n\t" \ | |
| "or %%o7, %%lo(here - 0x8), %%o7\n\t" \ | |
| "rd %%psr, %%g4\n\t" \ | |
| "std %%sp, [%%g6 + %4]\n\t" \ | |
| "rd %%wim, %%g5\n\t" \ | |
| "wr %%g4, 0x20, %%psr\n\t" \ | |
| "nop\n\t" \ | |
| "std %%g4, [%%g6 + %3]\n\t" \ | |
| "ldd [%2 + %3], %%g4\n\t" \ | |
| "mov %2, %%g6\n\t" \ | |
| ".globl patchme_store_new_current\n" \ | |
| "patchme_store_new_current:\n\t" \ | |
| "st %2, [%1]\n\t" \ | |
| "wr %%g4, 0x20, %%psr\n\t" \ | |
| "nop\n\t" \ | |
| "nop\n\t" \ | |
| "nop\n\t" /* LEON needs all 3 nops: load to %sp depends on CWP. */ \ | |
| "ldd [%%g6 + %4], %%sp\n\t" \ | |
| "wr %%g5, 0x0, %%wim\n\t" \ | |
| "ldd [%%sp + 0x00], %%l0\n\t" \ | |
| "ldd [%%sp + 0x38], %%i6\n\t" \ | |
| "wr %%g4, 0x0, %%psr\n\t" \ | |
| "nop\n\t" \ | |
| "nop\n\t" \ | |
| "jmpl %%o7 + 0x8, %%g0\n\t" \ | |
| " ld [%%g3 + %5], %0\n\t" \ | |
| "here:\n" \ | |
| : "=&r" (last) \ | |
| : "r" (&(current_set[hard_smp_processor_id()])), \ | |
| "r" (task_thread_info(next)), \ | |
| "i" (TI_KPSR), \ | |
| "i" (TI_KSP), \ | |
| "i" (TI_TASK) \ | |
| : "g1", "g2", "g3", "g4", "g5", "g7", \ | |
| "l0", "l1", "l3", "l4", "l5", "l6", "l7", \ | |
| "i0", "i1", "i2", "i3", "i4", "i5", \ | |
| "o0", "o1", "o2", "o3", "o7"); \ | |
| } while(0) | |
| /* XXX Change this if we ever use a PSO mode kernel. */ | |
| #define mb() __asm__ __volatile__ ("" : : : "memory") | |
| #define rmb() mb() | |
| #define wmb() mb() | |
| #define read_barrier_depends() do { } while(0) | |
| #define set_mb(__var, __value) do { __var = __value; mb(); } while(0) | |
| #define smp_mb() __asm__ __volatile__("":::"memory") | |
| #define smp_rmb() __asm__ __volatile__("":::"memory") | |
| #define smp_wmb() __asm__ __volatile__("":::"memory") | |
| #define smp_read_barrier_depends() do { } while(0) | |
| #define nop() __asm__ __volatile__ ("nop") | |
| /* This has special calling conventions */ | |
| #ifndef CONFIG_SMP | |
| BTFIXUPDEF_CALL(void, ___xchg32, void) | |
| #endif | |
| static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val) | |
| { | |
| #ifdef CONFIG_SMP | |
| __asm__ __volatile__("swap [%2], %0" | |
| : "=&r" (val) | |
| : "0" (val), "r" (m) | |
| : "memory"); | |
| return val; | |
| #else | |
| register unsigned long *ptr asm("g1"); | |
| register unsigned long ret asm("g2"); | |
| ptr = (unsigned long *) m; | |
| ret = val; | |
| /* Note: this is magic and the nop there is | |
| really needed. */ | |
| __asm__ __volatile__( | |
| "mov %%o7, %%g4\n\t" | |
| "call ___f____xchg32\n\t" | |
| " nop\n\t" | |
| : "=&r" (ret) | |
| : "0" (ret), "r" (ptr) | |
| : "g3", "g4", "g7", "memory", "cc"); | |
| return ret; | |
| #endif | |
| } | |
| #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) | |
| extern void __xchg_called_with_bad_pointer(void); | |
| static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size) | |
| { | |
| switch (size) { | |
| case 4: | |
| return xchg_u32(ptr, x); | |
| }; | |
| __xchg_called_with_bad_pointer(); | |
| return x; | |
| } | |
| /* Emulate cmpxchg() the same way we emulate atomics, | |
| * by hashing the object address and indexing into an array | |
| * of spinlocks to get a bit of performance... | |
| * | |
| * See arch/sparc/lib/atomic32.c for implementation. | |
| * | |
| * Cribbed from <asm-parisc/atomic.h> | |
| */ | |
| #define __HAVE_ARCH_CMPXCHG 1 | |
| /* bug catcher for when unsupported size is used - won't link */ | |
| extern void __cmpxchg_called_with_bad_pointer(void); | |
| /* we only need to support cmpxchg of a u32 on sparc */ | |
| extern unsigned long __cmpxchg_u32(volatile u32 *m, u32 old, u32 new_); | |
| /* don't worry...optimizer will get rid of most of this */ | |
| static inline unsigned long | |
| __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size) | |
| { | |
| switch (size) { | |
| case 4: | |
| return __cmpxchg_u32((u32 *)ptr, (u32)old, (u32)new_); | |
| default: | |
| __cmpxchg_called_with_bad_pointer(); | |
| break; | |
| } | |
| return old; | |
| } | |
| #define cmpxchg(ptr, o, n) \ | |
| ({ \ | |
| __typeof__(*(ptr)) _o_ = (o); \ | |
| __typeof__(*(ptr)) _n_ = (n); \ | |
| (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ | |
| (unsigned long)_n_, sizeof(*(ptr))); \ | |
| }) | |
| #include <asm-generic/cmpxchg-local.h> | |
| /* | |
| * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make | |
| * them available. | |
| */ | |
| #define cmpxchg_local(ptr, o, n) \ | |
| ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ | |
| (unsigned long)(n), sizeof(*(ptr)))) | |
| #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) | |
| extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn)); | |
| #endif /* __KERNEL__ */ | |
| #endif /* __ASSEMBLY__ */ | |
| #define arch_align_stack(x) (x) | |
| #endif /* !(__SPARC_SYSTEM_H) */ |