| /* -*- mode: c; c-basic-offset: 8; -*- | |
| * vim: noexpandtab sw=8 ts=8 sts=0: | |
| * | |
| * stack_user.c | |
| * | |
| * Code which interfaces ocfs2 with fs/dlm and a userspace stack. | |
| * | |
| * Copyright (C) 2007 Oracle. All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public | |
| * License as published by the Free Software Foundation, version 2. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/fs.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/mutex.h> | |
| #include <linux/reboot.h> | |
| #include <asm/uaccess.h> | |
| #include "ocfs2.h" /* For struct ocfs2_lock_res */ | |
| #include "stackglue.h" | |
| /* | |
| * The control protocol starts with a handshake. Until the handshake | |
| * is complete, the control device will fail all write(2)s. | |
| * | |
| * The handshake is simple. First, the client reads until EOF. Each line | |
| * of output is a supported protocol tag. All protocol tags are a single | |
| * character followed by a two hex digit version number. Currently the | |
| * only things supported is T01, for "Text-base version 0x01". Next, the | |
| * client writes the version they would like to use, including the newline. | |
| * Thus, the protocol tag is 'T01\n'. If the version tag written is | |
| * unknown, -EINVAL is returned. Once the negotiation is complete, the | |
| * client can start sending messages. | |
| * | |
| * The T01 protocol has three messages. First is the "SETN" message. | |
| * It has the following syntax: | |
| * | |
| * SETN<space><8-char-hex-nodenum><newline> | |
| * | |
| * This is 14 characters. | |
| * | |
| * The "SETN" message must be the first message following the protocol. | |
| * It tells ocfs2_control the local node number. | |
| * | |
| * Next comes the "SETV" message. It has the following syntax: | |
| * | |
| * SETV<space><2-char-hex-major><space><2-char-hex-minor><newline> | |
| * | |
| * This is 11 characters. | |
| * | |
| * The "SETV" message sets the filesystem locking protocol version as | |
| * negotiated by the client. The client negotiates based on the maximum | |
| * version advertised in /sys/fs/ocfs2/max_locking_protocol. The major | |
| * number from the "SETV" message must match | |
| * ocfs2_user_plugin.sp_proto->lp_max_version.pv_major, and the minor number | |
| * must be less than or equal to ...->lp_max_version.pv_minor. | |
| * | |
| * Once this information has been set, mounts will be allowed. From this | |
| * point on, the "DOWN" message can be sent for node down notification. | |
| * It has the following syntax: | |
| * | |
| * DOWN<space><32-char-cap-hex-uuid><space><8-char-hex-nodenum><newline> | |
| * | |
| * eg: | |
| * | |
| * DOWN 632A924FDD844190BDA93C0DF6B94899 00000001\n | |
| * | |
| * This is 47 characters. | |
| */ | |
| /* | |
| * Whether or not the client has done the handshake. | |
| * For now, we have just one protocol version. | |
| */ | |
| #define OCFS2_CONTROL_PROTO "T01\n" | |
| #define OCFS2_CONTROL_PROTO_LEN 4 | |
| /* Handshake states */ | |
| #define OCFS2_CONTROL_HANDSHAKE_INVALID (0) | |
| #define OCFS2_CONTROL_HANDSHAKE_READ (1) | |
| #define OCFS2_CONTROL_HANDSHAKE_PROTOCOL (2) | |
| #define OCFS2_CONTROL_HANDSHAKE_VALID (3) | |
| /* Messages */ | |
| #define OCFS2_CONTROL_MESSAGE_OP_LEN 4 | |
| #define OCFS2_CONTROL_MESSAGE_SETNODE_OP "SETN" | |
| #define OCFS2_CONTROL_MESSAGE_SETNODE_TOTAL_LEN 14 | |
| #define OCFS2_CONTROL_MESSAGE_SETVERSION_OP "SETV" | |
| #define OCFS2_CONTROL_MESSAGE_SETVERSION_TOTAL_LEN 11 | |
| #define OCFS2_CONTROL_MESSAGE_DOWN_OP "DOWN" | |
| #define OCFS2_CONTROL_MESSAGE_DOWN_TOTAL_LEN 47 | |
| #define OCFS2_TEXT_UUID_LEN 32 | |
| #define OCFS2_CONTROL_MESSAGE_VERNUM_LEN 2 | |
| #define OCFS2_CONTROL_MESSAGE_NODENUM_LEN 8 | |
| /* | |
| * ocfs2_live_connection is refcounted because the filesystem and | |
| * miscdevice sides can detach in different order. Let's just be safe. | |
| */ | |
| struct ocfs2_live_connection { | |
| struct list_head oc_list; | |
| struct ocfs2_cluster_connection *oc_conn; | |
| }; | |
| struct ocfs2_control_private { | |
| struct list_head op_list; | |
| int op_state; | |
| int op_this_node; | |
| struct ocfs2_protocol_version op_proto; | |
| }; | |
| /* SETN<space><8-char-hex-nodenum><newline> */ | |
| struct ocfs2_control_message_setn { | |
| char tag[OCFS2_CONTROL_MESSAGE_OP_LEN]; | |
| char space; | |
| char nodestr[OCFS2_CONTROL_MESSAGE_NODENUM_LEN]; | |
| char newline; | |
| }; | |
| /* SETV<space><2-char-hex-major><space><2-char-hex-minor><newline> */ | |
| struct ocfs2_control_message_setv { | |
| char tag[OCFS2_CONTROL_MESSAGE_OP_LEN]; | |
| char space1; | |
| char major[OCFS2_CONTROL_MESSAGE_VERNUM_LEN]; | |
| char space2; | |
| char minor[OCFS2_CONTROL_MESSAGE_VERNUM_LEN]; | |
| char newline; | |
| }; | |
| /* DOWN<space><32-char-cap-hex-uuid><space><8-char-hex-nodenum><newline> */ | |
| struct ocfs2_control_message_down { | |
| char tag[OCFS2_CONTROL_MESSAGE_OP_LEN]; | |
| char space1; | |
| char uuid[OCFS2_TEXT_UUID_LEN]; | |
| char space2; | |
| char nodestr[OCFS2_CONTROL_MESSAGE_NODENUM_LEN]; | |
| char newline; | |
| }; | |
| union ocfs2_control_message { | |
| char tag[OCFS2_CONTROL_MESSAGE_OP_LEN]; | |
| struct ocfs2_control_message_setn u_setn; | |
| struct ocfs2_control_message_setv u_setv; | |
| struct ocfs2_control_message_down u_down; | |
| }; | |
| static struct ocfs2_stack_plugin ocfs2_user_plugin; | |
| static atomic_t ocfs2_control_opened; | |
| static int ocfs2_control_this_node = -1; | |
| static struct ocfs2_protocol_version running_proto; | |
| static LIST_HEAD(ocfs2_live_connection_list); | |
| static LIST_HEAD(ocfs2_control_private_list); | |
| static DEFINE_MUTEX(ocfs2_control_lock); | |
| static inline void ocfs2_control_set_handshake_state(struct file *file, | |
| int state) | |
| { | |
| struct ocfs2_control_private *p = file->private_data; | |
| p->op_state = state; | |
| } | |
| static inline int ocfs2_control_get_handshake_state(struct file *file) | |
| { | |
| struct ocfs2_control_private *p = file->private_data; | |
| return p->op_state; | |
| } | |
| static struct ocfs2_live_connection *ocfs2_connection_find(const char *name) | |
| { | |
| size_t len = strlen(name); | |
| struct ocfs2_live_connection *c; | |
| BUG_ON(!mutex_is_locked(&ocfs2_control_lock)); | |
| list_for_each_entry(c, &ocfs2_live_connection_list, oc_list) { | |
| if ((c->oc_conn->cc_namelen == len) && | |
| !strncmp(c->oc_conn->cc_name, name, len)) | |
| return c; | |
| } | |
| return c; | |
| } | |
| /* | |
| * ocfs2_live_connection structures are created underneath the ocfs2 | |
| * mount path. Since the VFS prevents multiple calls to | |
| * fill_super(), we can't get dupes here. | |
| */ | |
| static int ocfs2_live_connection_new(struct ocfs2_cluster_connection *conn, | |
| struct ocfs2_live_connection **c_ret) | |
| { | |
| int rc = 0; | |
| struct ocfs2_live_connection *c; | |
| c = kzalloc(sizeof(struct ocfs2_live_connection), GFP_KERNEL); | |
| if (!c) | |
| return -ENOMEM; | |
| mutex_lock(&ocfs2_control_lock); | |
| c->oc_conn = conn; | |
| if (atomic_read(&ocfs2_control_opened)) | |
| list_add(&c->oc_list, &ocfs2_live_connection_list); | |
| else { | |
| printk(KERN_ERR | |
| "ocfs2: Userspace control daemon is not present\n"); | |
| rc = -ESRCH; | |
| } | |
| mutex_unlock(&ocfs2_control_lock); | |
| if (!rc) | |
| *c_ret = c; | |
| else | |
| kfree(c); | |
| return rc; | |
| } | |
| /* | |
| * This function disconnects the cluster connection from ocfs2_control. | |
| * Afterwards, userspace can't affect the cluster connection. | |
| */ | |
| static void ocfs2_live_connection_drop(struct ocfs2_live_connection *c) | |
| { | |
| mutex_lock(&ocfs2_control_lock); | |
| list_del_init(&c->oc_list); | |
| c->oc_conn = NULL; | |
| mutex_unlock(&ocfs2_control_lock); | |
| kfree(c); | |
| } | |
| static int ocfs2_control_cfu(void *target, size_t target_len, | |
| const char __user *buf, size_t count) | |
| { | |
| /* The T01 expects write(2) calls to have exactly one command */ | |
| if ((count != target_len) || | |
| (count > sizeof(union ocfs2_control_message))) | |
| return -EINVAL; | |
| if (copy_from_user(target, buf, target_len)) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| static ssize_t ocfs2_control_validate_protocol(struct file *file, | |
| const char __user *buf, | |
| size_t count) | |
| { | |
| ssize_t ret; | |
| char kbuf[OCFS2_CONTROL_PROTO_LEN]; | |
| ret = ocfs2_control_cfu(kbuf, OCFS2_CONTROL_PROTO_LEN, | |
| buf, count); | |
| if (ret) | |
| return ret; | |
| if (strncmp(kbuf, OCFS2_CONTROL_PROTO, OCFS2_CONTROL_PROTO_LEN)) | |
| return -EINVAL; | |
| ocfs2_control_set_handshake_state(file, | |
| OCFS2_CONTROL_HANDSHAKE_PROTOCOL); | |
| return count; | |
| } | |
| static void ocfs2_control_send_down(const char *uuid, | |
| int nodenum) | |
| { | |
| struct ocfs2_live_connection *c; | |
| mutex_lock(&ocfs2_control_lock); | |
| c = ocfs2_connection_find(uuid); | |
| if (c) { | |
| BUG_ON(c->oc_conn == NULL); | |
| c->oc_conn->cc_recovery_handler(nodenum, | |
| c->oc_conn->cc_recovery_data); | |
| } | |
| mutex_unlock(&ocfs2_control_lock); | |
| } | |
| /* | |
| * Called whenever configuration elements are sent to /dev/ocfs2_control. | |
| * If all configuration elements are present, try to set the global | |
| * values. If there is a problem, return an error. Skip any missing | |
| * elements, and only bump ocfs2_control_opened when we have all elements | |
| * and are successful. | |
| */ | |
| static int ocfs2_control_install_private(struct file *file) | |
| { | |
| int rc = 0; | |
| int set_p = 1; | |
| struct ocfs2_control_private *p = file->private_data; | |
| BUG_ON(p->op_state != OCFS2_CONTROL_HANDSHAKE_PROTOCOL); | |
| mutex_lock(&ocfs2_control_lock); | |
| if (p->op_this_node < 0) { | |
| set_p = 0; | |
| } else if ((ocfs2_control_this_node >= 0) && | |
| (ocfs2_control_this_node != p->op_this_node)) { | |
| rc = -EINVAL; | |
| goto out_unlock; | |
| } | |
| if (!p->op_proto.pv_major) { | |
| set_p = 0; | |
| } else if (!list_empty(&ocfs2_live_connection_list) && | |
| ((running_proto.pv_major != p->op_proto.pv_major) || | |
| (running_proto.pv_minor != p->op_proto.pv_minor))) { | |
| rc = -EINVAL; | |
| goto out_unlock; | |
| } | |
| if (set_p) { | |
| ocfs2_control_this_node = p->op_this_node; | |
| running_proto.pv_major = p->op_proto.pv_major; | |
| running_proto.pv_minor = p->op_proto.pv_minor; | |
| } | |
| out_unlock: | |
| mutex_unlock(&ocfs2_control_lock); | |
| if (!rc && set_p) { | |
| /* We set the global values successfully */ | |
| atomic_inc(&ocfs2_control_opened); | |
| ocfs2_control_set_handshake_state(file, | |
| OCFS2_CONTROL_HANDSHAKE_VALID); | |
| } | |
| return rc; | |
| } | |
| static int ocfs2_control_get_this_node(void) | |
| { | |
| int rc; | |
| mutex_lock(&ocfs2_control_lock); | |
| if (ocfs2_control_this_node < 0) | |
| rc = -EINVAL; | |
| else | |
| rc = ocfs2_control_this_node; | |
| mutex_unlock(&ocfs2_control_lock); | |
| return rc; | |
| } | |
| static int ocfs2_control_do_setnode_msg(struct file *file, | |
| struct ocfs2_control_message_setn *msg) | |
| { | |
| long nodenum; | |
| char *ptr = NULL; | |
| struct ocfs2_control_private *p = file->private_data; | |
| if (ocfs2_control_get_handshake_state(file) != | |
| OCFS2_CONTROL_HANDSHAKE_PROTOCOL) | |
| return -EINVAL; | |
| if (strncmp(msg->tag, OCFS2_CONTROL_MESSAGE_SETNODE_OP, | |
| OCFS2_CONTROL_MESSAGE_OP_LEN)) | |
| return -EINVAL; | |
| if ((msg->space != ' ') || (msg->newline != '\n')) | |
| return -EINVAL; | |
| msg->space = msg->newline = '\0'; | |
| nodenum = simple_strtol(msg->nodestr, &ptr, 16); | |
| if (!ptr || *ptr) | |
| return -EINVAL; | |
| if ((nodenum == LONG_MIN) || (nodenum == LONG_MAX) || | |
| (nodenum > INT_MAX) || (nodenum < 0)) | |
| return -ERANGE; | |
| p->op_this_node = nodenum; | |
| return ocfs2_control_install_private(file); | |
| } | |
| static int ocfs2_control_do_setversion_msg(struct file *file, | |
| struct ocfs2_control_message_setv *msg) | |
| { | |
| long major, minor; | |
| char *ptr = NULL; | |
| struct ocfs2_control_private *p = file->private_data; | |
| struct ocfs2_protocol_version *max = | |
| &ocfs2_user_plugin.sp_proto->lp_max_version; | |
| if (ocfs2_control_get_handshake_state(file) != | |
| OCFS2_CONTROL_HANDSHAKE_PROTOCOL) | |
| return -EINVAL; | |
| if (strncmp(msg->tag, OCFS2_CONTROL_MESSAGE_SETVERSION_OP, | |
| OCFS2_CONTROL_MESSAGE_OP_LEN)) | |
| return -EINVAL; | |
| if ((msg->space1 != ' ') || (msg->space2 != ' ') || | |
| (msg->newline != '\n')) | |
| return -EINVAL; | |
| msg->space1 = msg->space2 = msg->newline = '\0'; | |
| major = simple_strtol(msg->major, &ptr, 16); | |
| if (!ptr || *ptr) | |
| return -EINVAL; | |
| minor = simple_strtol(msg->minor, &ptr, 16); | |
| if (!ptr || *ptr) | |
| return -EINVAL; | |
| /* | |
| * The major must be between 1 and 255, inclusive. The minor | |
| * must be between 0 and 255, inclusive. The version passed in | |
| * must be within the maximum version supported by the filesystem. | |
| */ | |
| if ((major == LONG_MIN) || (major == LONG_MAX) || | |
| (major > (u8)-1) || (major < 1)) | |
| return -ERANGE; | |
| if ((minor == LONG_MIN) || (minor == LONG_MAX) || | |
| (minor > (u8)-1) || (minor < 0)) | |
| return -ERANGE; | |
| if ((major != max->pv_major) || | |
| (minor > max->pv_minor)) | |
| return -EINVAL; | |
| p->op_proto.pv_major = major; | |
| p->op_proto.pv_minor = minor; | |
| return ocfs2_control_install_private(file); | |
| } | |
| static int ocfs2_control_do_down_msg(struct file *file, | |
| struct ocfs2_control_message_down *msg) | |
| { | |
| long nodenum; | |
| char *p = NULL; | |
| if (ocfs2_control_get_handshake_state(file) != | |
| OCFS2_CONTROL_HANDSHAKE_VALID) | |
| return -EINVAL; | |
| if (strncmp(msg->tag, OCFS2_CONTROL_MESSAGE_DOWN_OP, | |
| OCFS2_CONTROL_MESSAGE_OP_LEN)) | |
| return -EINVAL; | |
| if ((msg->space1 != ' ') || (msg->space2 != ' ') || | |
| (msg->newline != '\n')) | |
| return -EINVAL; | |
| msg->space1 = msg->space2 = msg->newline = '\0'; | |
| nodenum = simple_strtol(msg->nodestr, &p, 16); | |
| if (!p || *p) | |
| return -EINVAL; | |
| if ((nodenum == LONG_MIN) || (nodenum == LONG_MAX) || | |
| (nodenum > INT_MAX) || (nodenum < 0)) | |
| return -ERANGE; | |
| ocfs2_control_send_down(msg->uuid, nodenum); | |
| return 0; | |
| } | |
| static ssize_t ocfs2_control_message(struct file *file, | |
| const char __user *buf, | |
| size_t count) | |
| { | |
| ssize_t ret; | |
| union ocfs2_control_message msg; | |
| /* Try to catch padding issues */ | |
| WARN_ON(offsetof(struct ocfs2_control_message_down, uuid) != | |
| (sizeof(msg.u_down.tag) + sizeof(msg.u_down.space1))); | |
| memset(&msg, 0, sizeof(union ocfs2_control_message)); | |
| ret = ocfs2_control_cfu(&msg, count, buf, count); | |
| if (ret) | |
| goto out; | |
| if ((count == OCFS2_CONTROL_MESSAGE_SETNODE_TOTAL_LEN) && | |
| !strncmp(msg.tag, OCFS2_CONTROL_MESSAGE_SETNODE_OP, | |
| OCFS2_CONTROL_MESSAGE_OP_LEN)) | |
| ret = ocfs2_control_do_setnode_msg(file, &msg.u_setn); | |
| else if ((count == OCFS2_CONTROL_MESSAGE_SETVERSION_TOTAL_LEN) && | |
| !strncmp(msg.tag, OCFS2_CONTROL_MESSAGE_SETVERSION_OP, | |
| OCFS2_CONTROL_MESSAGE_OP_LEN)) | |
| ret = ocfs2_control_do_setversion_msg(file, &msg.u_setv); | |
| else if ((count == OCFS2_CONTROL_MESSAGE_DOWN_TOTAL_LEN) && | |
| !strncmp(msg.tag, OCFS2_CONTROL_MESSAGE_DOWN_OP, | |
| OCFS2_CONTROL_MESSAGE_OP_LEN)) | |
| ret = ocfs2_control_do_down_msg(file, &msg.u_down); | |
| else | |
| ret = -EINVAL; | |
| out: | |
| return ret ? ret : count; | |
| } | |
| static ssize_t ocfs2_control_write(struct file *file, | |
| const char __user *buf, | |
| size_t count, | |
| loff_t *ppos) | |
| { | |
| ssize_t ret; | |
| switch (ocfs2_control_get_handshake_state(file)) { | |
| case OCFS2_CONTROL_HANDSHAKE_INVALID: | |
| ret = -EINVAL; | |
| break; | |
| case OCFS2_CONTROL_HANDSHAKE_READ: | |
| ret = ocfs2_control_validate_protocol(file, buf, | |
| count); | |
| break; | |
| case OCFS2_CONTROL_HANDSHAKE_PROTOCOL: | |
| case OCFS2_CONTROL_HANDSHAKE_VALID: | |
| ret = ocfs2_control_message(file, buf, count); | |
| break; | |
| default: | |
| BUG(); | |
| ret = -EIO; | |
| break; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * This is a naive version. If we ever have a new protocol, we'll expand | |
| * it. Probably using seq_file. | |
| */ | |
| static ssize_t ocfs2_control_read(struct file *file, | |
| char __user *buf, | |
| size_t count, | |
| loff_t *ppos) | |
| { | |
| char *proto_string = OCFS2_CONTROL_PROTO; | |
| size_t to_write = 0; | |
| if (*ppos >= OCFS2_CONTROL_PROTO_LEN) | |
| return 0; | |
| to_write = OCFS2_CONTROL_PROTO_LEN - *ppos; | |
| if (to_write > count) | |
| to_write = count; | |
| if (copy_to_user(buf, proto_string + *ppos, to_write)) | |
| return -EFAULT; | |
| *ppos += to_write; | |
| /* Have we read the whole protocol list? */ | |
| if (*ppos >= OCFS2_CONTROL_PROTO_LEN) | |
| ocfs2_control_set_handshake_state(file, | |
| OCFS2_CONTROL_HANDSHAKE_READ); | |
| return to_write; | |
| } | |
| static int ocfs2_control_release(struct inode *inode, struct file *file) | |
| { | |
| struct ocfs2_control_private *p = file->private_data; | |
| mutex_lock(&ocfs2_control_lock); | |
| if (ocfs2_control_get_handshake_state(file) != | |
| OCFS2_CONTROL_HANDSHAKE_VALID) | |
| goto out; | |
| if (atomic_dec_and_test(&ocfs2_control_opened)) { | |
| if (!list_empty(&ocfs2_live_connection_list)) { | |
| /* XXX: Do bad things! */ | |
| printk(KERN_ERR | |
| "ocfs2: Unexpected release of ocfs2_control!\n" | |
| " Loss of cluster connection requires " | |
| "an emergency restart!\n"); | |
| emergency_restart(); | |
| } | |
| /* | |
| * Last valid close clears the node number and resets | |
| * the locking protocol version | |
| */ | |
| ocfs2_control_this_node = -1; | |
| running_proto.pv_major = 0; | |
| running_proto.pv_major = 0; | |
| } | |
| out: | |
| list_del_init(&p->op_list); | |
| file->private_data = NULL; | |
| mutex_unlock(&ocfs2_control_lock); | |
| kfree(p); | |
| return 0; | |
| } | |
| static int ocfs2_control_open(struct inode *inode, struct file *file) | |
| { | |
| struct ocfs2_control_private *p; | |
| p = kzalloc(sizeof(struct ocfs2_control_private), GFP_KERNEL); | |
| if (!p) | |
| return -ENOMEM; | |
| p->op_this_node = -1; | |
| mutex_lock(&ocfs2_control_lock); | |
| file->private_data = p; | |
| list_add(&p->op_list, &ocfs2_control_private_list); | |
| mutex_unlock(&ocfs2_control_lock); | |
| return 0; | |
| } | |
| static const struct file_operations ocfs2_control_fops = { | |
| .open = ocfs2_control_open, | |
| .release = ocfs2_control_release, | |
| .read = ocfs2_control_read, | |
| .write = ocfs2_control_write, | |
| .owner = THIS_MODULE, | |
| }; | |
| static struct miscdevice ocfs2_control_device = { | |
| .minor = MISC_DYNAMIC_MINOR, | |
| .name = "ocfs2_control", | |
| .fops = &ocfs2_control_fops, | |
| }; | |
| static int ocfs2_control_init(void) | |
| { | |
| int rc; | |
| atomic_set(&ocfs2_control_opened, 0); | |
| rc = misc_register(&ocfs2_control_device); | |
| if (rc) | |
| printk(KERN_ERR | |
| "ocfs2: Unable to register ocfs2_control device " | |
| "(errno %d)\n", | |
| -rc); | |
| return rc; | |
| } | |
| static void ocfs2_control_exit(void) | |
| { | |
| int rc; | |
| rc = misc_deregister(&ocfs2_control_device); | |
| if (rc) | |
| printk(KERN_ERR | |
| "ocfs2: Unable to deregister ocfs2_control device " | |
| "(errno %d)\n", | |
| -rc); | |
| } | |
| static struct dlm_lksb *fsdlm_astarg_to_lksb(void *astarg) | |
| { | |
| struct ocfs2_lock_res *res = astarg; | |
| return &res->l_lksb.lksb_fsdlm; | |
| } | |
| static void fsdlm_lock_ast_wrapper(void *astarg) | |
| { | |
| struct dlm_lksb *lksb = fsdlm_astarg_to_lksb(astarg); | |
| int status = lksb->sb_status; | |
| BUG_ON(ocfs2_user_plugin.sp_proto == NULL); | |
| /* | |
| * For now we're punting on the issue of other non-standard errors | |
| * where we can't tell if the unlock_ast or lock_ast should be called. | |
| * The main "other error" that's possible is EINVAL which means the | |
| * function was called with invalid args, which shouldn't be possible | |
| * since the caller here is under our control. Other non-standard | |
| * errors probably fall into the same category, or otherwise are fatal | |
| * which means we can't carry on anyway. | |
| */ | |
| if (status == -DLM_EUNLOCK || status == -DLM_ECANCEL) | |
| ocfs2_user_plugin.sp_proto->lp_unlock_ast(astarg, 0); | |
| else | |
| ocfs2_user_plugin.sp_proto->lp_lock_ast(astarg); | |
| } | |
| static void fsdlm_blocking_ast_wrapper(void *astarg, int level) | |
| { | |
| BUG_ON(ocfs2_user_plugin.sp_proto == NULL); | |
| ocfs2_user_plugin.sp_proto->lp_blocking_ast(astarg, level); | |
| } | |
| static int user_dlm_lock(struct ocfs2_cluster_connection *conn, | |
| int mode, | |
| union ocfs2_dlm_lksb *lksb, | |
| u32 flags, | |
| void *name, | |
| unsigned int namelen, | |
| void *astarg) | |
| { | |
| int ret; | |
| if (!lksb->lksb_fsdlm.sb_lvbptr) | |
| lksb->lksb_fsdlm.sb_lvbptr = (char *)lksb + | |
| sizeof(struct dlm_lksb); | |
| ret = dlm_lock(conn->cc_lockspace, mode, &lksb->lksb_fsdlm, | |
| flags|DLM_LKF_NODLCKWT, name, namelen, 0, | |
| fsdlm_lock_ast_wrapper, astarg, | |
| fsdlm_blocking_ast_wrapper); | |
| return ret; | |
| } | |
| static int user_dlm_unlock(struct ocfs2_cluster_connection *conn, | |
| union ocfs2_dlm_lksb *lksb, | |
| u32 flags, | |
| void *astarg) | |
| { | |
| int ret; | |
| ret = dlm_unlock(conn->cc_lockspace, lksb->lksb_fsdlm.sb_lkid, | |
| flags, &lksb->lksb_fsdlm, astarg); | |
| return ret; | |
| } | |
| static int user_dlm_lock_status(union ocfs2_dlm_lksb *lksb) | |
| { | |
| return lksb->lksb_fsdlm.sb_status; | |
| } | |
| static void *user_dlm_lvb(union ocfs2_dlm_lksb *lksb) | |
| { | |
| return (void *)(lksb->lksb_fsdlm.sb_lvbptr); | |
| } | |
| static void user_dlm_dump_lksb(union ocfs2_dlm_lksb *lksb) | |
| { | |
| } | |
| /* | |
| * Compare a requested locking protocol version against the current one. | |
| * | |
| * If the major numbers are different, they are incompatible. | |
| * If the current minor is greater than the request, they are incompatible. | |
| * If the current minor is less than or equal to the request, they are | |
| * compatible, and the requester should run at the current minor version. | |
| */ | |
| static int fs_protocol_compare(struct ocfs2_protocol_version *existing, | |
| struct ocfs2_protocol_version *request) | |
| { | |
| if (existing->pv_major != request->pv_major) | |
| return 1; | |
| if (existing->pv_minor > request->pv_minor) | |
| return 1; | |
| if (existing->pv_minor < request->pv_minor) | |
| request->pv_minor = existing->pv_minor; | |
| return 0; | |
| } | |
| static int user_cluster_connect(struct ocfs2_cluster_connection *conn) | |
| { | |
| dlm_lockspace_t *fsdlm; | |
| struct ocfs2_live_connection *control; | |
| int rc = 0; | |
| BUG_ON(conn == NULL); | |
| rc = ocfs2_live_connection_new(conn, &control); | |
| if (rc) | |
| goto out; | |
| /* | |
| * running_proto must have been set before we allowed any mounts | |
| * to proceed. | |
| */ | |
| if (fs_protocol_compare(&running_proto, &conn->cc_version)) { | |
| printk(KERN_ERR | |
| "Unable to mount with fs locking protocol version " | |
| "%u.%u because the userspace control daemon has " | |
| "negotiated %u.%u\n", | |
| conn->cc_version.pv_major, conn->cc_version.pv_minor, | |
| running_proto.pv_major, running_proto.pv_minor); | |
| rc = -EPROTO; | |
| ocfs2_live_connection_drop(control); | |
| goto out; | |
| } | |
| rc = dlm_new_lockspace(conn->cc_name, strlen(conn->cc_name), | |
| &fsdlm, DLM_LSFL_FS, DLM_LVB_LEN); | |
| if (rc) { | |
| ocfs2_live_connection_drop(control); | |
| goto out; | |
| } | |
| conn->cc_private = control; | |
| conn->cc_lockspace = fsdlm; | |
| out: | |
| return rc; | |
| } | |
| static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn, | |
| int hangup_pending) | |
| { | |
| dlm_release_lockspace(conn->cc_lockspace, 2); | |
| conn->cc_lockspace = NULL; | |
| ocfs2_live_connection_drop(conn->cc_private); | |
| conn->cc_private = NULL; | |
| return 0; | |
| } | |
| static int user_cluster_this_node(unsigned int *this_node) | |
| { | |
| int rc; | |
| rc = ocfs2_control_get_this_node(); | |
| if (rc < 0) | |
| return rc; | |
| *this_node = rc; | |
| return 0; | |
| } | |
| static struct ocfs2_stack_operations ocfs2_user_plugin_ops = { | |
| .connect = user_cluster_connect, | |
| .disconnect = user_cluster_disconnect, | |
| .this_node = user_cluster_this_node, | |
| .dlm_lock = user_dlm_lock, | |
| .dlm_unlock = user_dlm_unlock, | |
| .lock_status = user_dlm_lock_status, | |
| .lock_lvb = user_dlm_lvb, | |
| .dump_lksb = user_dlm_dump_lksb, | |
| }; | |
| static struct ocfs2_stack_plugin ocfs2_user_plugin = { | |
| .sp_name = "user", | |
| .sp_ops = &ocfs2_user_plugin_ops, | |
| .sp_owner = THIS_MODULE, | |
| }; | |
| static int __init ocfs2_user_plugin_init(void) | |
| { | |
| int rc; | |
| rc = ocfs2_control_init(); | |
| if (!rc) { | |
| rc = ocfs2_stack_glue_register(&ocfs2_user_plugin); | |
| if (rc) | |
| ocfs2_control_exit(); | |
| } | |
| return rc; | |
| } | |
| static void __exit ocfs2_user_plugin_exit(void) | |
| { | |
| ocfs2_stack_glue_unregister(&ocfs2_user_plugin); | |
| ocfs2_control_exit(); | |
| } | |
| MODULE_AUTHOR("Oracle"); | |
| MODULE_DESCRIPTION("ocfs2 driver for userspace cluster stacks"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(ocfs2_user_plugin_init); | |
| module_exit(ocfs2_user_plugin_exit); |