| /* | |
| * linux/drivers/video/imxfb.c | |
| * | |
| * Freescale i.MX Frame Buffer device driver | |
| * | |
| * Copyright (C) 2004 Sascha Hauer, Pengutronix | |
| * Based on acornfb.c Copyright (C) Russell King. | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file COPYING in the main directory of this archive for | |
| * more details. | |
| * | |
| * Please direct your questions and comments on this driver to the following | |
| * email address: | |
| * | |
| * linux-arm-kernel@lists.arm.linux.org.uk | |
| */ | |
| //#define DEBUG 1 | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/slab.h> | |
| #include <linux/fb.h> | |
| #include <linux/delay.h> | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/dma-mapping.h> | |
| #include <asm/hardware.h> | |
| #include <asm/io.h> | |
| #include <asm/arch/imxfb.h> | |
| /* | |
| * Complain if VAR is out of range. | |
| */ | |
| #define DEBUG_VAR 1 | |
| #include "imxfb.h" | |
| static struct imxfb_rgb def_rgb_16 = { | |
| .red = { .offset = 8, .length = 4, }, | |
| .green = { .offset = 4, .length = 4, }, | |
| .blue = { .offset = 0, .length = 4, }, | |
| .transp = { .offset = 0, .length = 0, }, | |
| }; | |
| static struct imxfb_rgb def_rgb_8 = { | |
| .red = { .offset = 0, .length = 8, }, | |
| .green = { .offset = 0, .length = 8, }, | |
| .blue = { .offset = 0, .length = 8, }, | |
| .transp = { .offset = 0, .length = 0, }, | |
| }; | |
| static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info); | |
| static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf) | |
| { | |
| chan &= 0xffff; | |
| chan >>= 16 - bf->length; | |
| return chan << bf->offset; | |
| } | |
| #define LCDC_PALETTE(x) __REG2(IMX_LCDC_BASE+0x800, (x)<<2) | |
| static int | |
| imxfb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue, | |
| u_int trans, struct fb_info *info) | |
| { | |
| struct imxfb_info *fbi = info->par; | |
| u_int val, ret = 1; | |
| #define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16) | |
| if (regno < fbi->palette_size) { | |
| val = (CNVT_TOHW(red, 4) << 8) | | |
| (CNVT_TOHW(green,4) << 4) | | |
| CNVT_TOHW(blue, 4); | |
| LCDC_PALETTE(regno) = val; | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| static int | |
| imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
| u_int trans, struct fb_info *info) | |
| { | |
| struct imxfb_info *fbi = info->par; | |
| unsigned int val; | |
| int ret = 1; | |
| /* | |
| * If inverse mode was selected, invert all the colours | |
| * rather than the register number. The register number | |
| * is what you poke into the framebuffer to produce the | |
| * colour you requested. | |
| */ | |
| if (fbi->cmap_inverse) { | |
| red = 0xffff - red; | |
| green = 0xffff - green; | |
| blue = 0xffff - blue; | |
| } | |
| /* | |
| * If greyscale is true, then we convert the RGB value | |
| * to greyscale no mater what visual we are using. | |
| */ | |
| if (info->var.grayscale) | |
| red = green = blue = (19595 * red + 38470 * green + | |
| 7471 * blue) >> 16; | |
| switch (info->fix.visual) { | |
| case FB_VISUAL_TRUECOLOR: | |
| /* | |
| * 12 or 16-bit True Colour. We encode the RGB value | |
| * according to the RGB bitfield information. | |
| */ | |
| if (regno < 16) { | |
| u32 *pal = info->pseudo_palette; | |
| val = chan_to_field(red, &info->var.red); | |
| val |= chan_to_field(green, &info->var.green); | |
| val |= chan_to_field(blue, &info->var.blue); | |
| pal[regno] = val; | |
| ret = 0; | |
| } | |
| break; | |
| case FB_VISUAL_STATIC_PSEUDOCOLOR: | |
| case FB_VISUAL_PSEUDOCOLOR: | |
| ret = imxfb_setpalettereg(regno, red, green, blue, trans, info); | |
| break; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * imxfb_check_var(): | |
| * Round up in the following order: bits_per_pixel, xres, | |
| * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale, | |
| * bitfields, horizontal timing, vertical timing. | |
| */ | |
| static int | |
| imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) | |
| { | |
| struct imxfb_info *fbi = info->par; | |
| int rgbidx; | |
| if (var->xres < MIN_XRES) | |
| var->xres = MIN_XRES; | |
| if (var->yres < MIN_YRES) | |
| var->yres = MIN_YRES; | |
| if (var->xres > fbi->max_xres) | |
| var->xres = fbi->max_xres; | |
| if (var->yres > fbi->max_yres) | |
| var->yres = fbi->max_yres; | |
| var->xres_virtual = max(var->xres_virtual, var->xres); | |
| var->yres_virtual = max(var->yres_virtual, var->yres); | |
| pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel); | |
| switch (var->bits_per_pixel) { | |
| case 16: | |
| rgbidx = RGB_16; | |
| break; | |
| case 8: | |
| rgbidx = RGB_8; | |
| break; | |
| default: | |
| rgbidx = RGB_16; | |
| } | |
| /* | |
| * Copy the RGB parameters for this display | |
| * from the machine specific parameters. | |
| */ | |
| var->red = fbi->rgb[rgbidx]->red; | |
| var->green = fbi->rgb[rgbidx]->green; | |
| var->blue = fbi->rgb[rgbidx]->blue; | |
| var->transp = fbi->rgb[rgbidx]->transp; | |
| pr_debug("RGBT length = %d:%d:%d:%d\n", | |
| var->red.length, var->green.length, var->blue.length, | |
| var->transp.length); | |
| pr_debug("RGBT offset = %d:%d:%d:%d\n", | |
| var->red.offset, var->green.offset, var->blue.offset, | |
| var->transp.offset); | |
| return 0; | |
| } | |
| /* | |
| * imxfb_set_par(): | |
| * Set the user defined part of the display for the specified console | |
| */ | |
| static int imxfb_set_par(struct fb_info *info) | |
| { | |
| struct imxfb_info *fbi = info->par; | |
| struct fb_var_screeninfo *var = &info->var; | |
| pr_debug("set_par\n"); | |
| if (var->bits_per_pixel == 16) | |
| info->fix.visual = FB_VISUAL_TRUECOLOR; | |
| else if (!fbi->cmap_static) | |
| info->fix.visual = FB_VISUAL_PSEUDOCOLOR; | |
| else { | |
| /* | |
| * Some people have weird ideas about wanting static | |
| * pseudocolor maps. I suspect their user space | |
| * applications are broken. | |
| */ | |
| info->fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR; | |
| } | |
| info->fix.line_length = var->xres_virtual * | |
| var->bits_per_pixel / 8; | |
| fbi->palette_size = var->bits_per_pixel == 8 ? 256 : 16; | |
| imxfb_activate_var(var, info); | |
| return 0; | |
| } | |
| static void imxfb_enable_controller(struct imxfb_info *fbi) | |
| { | |
| pr_debug("Enabling LCD controller\n"); | |
| /* initialize LCDC */ | |
| LCDC_RMCR &= ~RMCR_LCDC_EN; /* just to be safe... */ | |
| LCDC_SSA = fbi->screen_dma; | |
| /* physical screen start address */ | |
| LCDC_VPW = VPW_VPW(fbi->max_xres * fbi->max_bpp / 8 / 4); | |
| LCDC_POS = 0x00000000; /* panning offset 0 (0 pixel offset) */ | |
| /* disable hardware cursor */ | |
| LCDC_CPOS &= ~(CPOS_CC0 | CPOS_CC1); | |
| LCDC_RMCR = RMCR_LCDC_EN; | |
| if(fbi->backlight_power) | |
| fbi->backlight_power(1); | |
| if(fbi->lcd_power) | |
| fbi->lcd_power(1); | |
| } | |
| static void imxfb_disable_controller(struct imxfb_info *fbi) | |
| { | |
| pr_debug("Disabling LCD controller\n"); | |
| if(fbi->backlight_power) | |
| fbi->backlight_power(0); | |
| if(fbi->lcd_power) | |
| fbi->lcd_power(0); | |
| LCDC_RMCR = 0; | |
| } | |
| static int imxfb_blank(int blank, struct fb_info *info) | |
| { | |
| struct imxfb_info *fbi = info->par; | |
| pr_debug("imxfb_blank: blank=%d\n", blank); | |
| switch (blank) { | |
| case FB_BLANK_POWERDOWN: | |
| case FB_BLANK_VSYNC_SUSPEND: | |
| case FB_BLANK_HSYNC_SUSPEND: | |
| case FB_BLANK_NORMAL: | |
| imxfb_disable_controller(fbi); | |
| break; | |
| case FB_BLANK_UNBLANK: | |
| imxfb_enable_controller(fbi); | |
| break; | |
| } | |
| return 0; | |
| } | |
| static struct fb_ops imxfb_ops = { | |
| .owner = THIS_MODULE, | |
| .fb_check_var = imxfb_check_var, | |
| .fb_set_par = imxfb_set_par, | |
| .fb_setcolreg = imxfb_setcolreg, | |
| .fb_fillrect = cfb_fillrect, | |
| .fb_copyarea = cfb_copyarea, | |
| .fb_imageblit = cfb_imageblit, | |
| .fb_blank = imxfb_blank, | |
| }; | |
| /* | |
| * imxfb_activate_var(): | |
| * Configures LCD Controller based on entries in var parameter. Settings are | |
| * only written to the controller if changes were made. | |
| */ | |
| static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info) | |
| { | |
| struct imxfb_info *fbi = info->par; | |
| pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n", | |
| var->xres, var->hsync_len, | |
| var->left_margin, var->right_margin); | |
| pr_debug("var: yres=%d vslen=%d um=%d bm=%d\n", | |
| var->yres, var->vsync_len, | |
| var->upper_margin, var->lower_margin); | |
| #if DEBUG_VAR | |
| if (var->xres < 16 || var->xres > 1024) | |
| printk(KERN_ERR "%s: invalid xres %d\n", | |
| info->fix.id, var->xres); | |
| if (var->hsync_len < 1 || var->hsync_len > 64) | |
| printk(KERN_ERR "%s: invalid hsync_len %d\n", | |
| info->fix.id, var->hsync_len); | |
| if (var->left_margin > 255) | |
| printk(KERN_ERR "%s: invalid left_margin %d\n", | |
| info->fix.id, var->left_margin); | |
| if (var->right_margin > 255) | |
| printk(KERN_ERR "%s: invalid right_margin %d\n", | |
| info->fix.id, var->right_margin); | |
| if (var->yres < 1 || var->yres > 511) | |
| printk(KERN_ERR "%s: invalid yres %d\n", | |
| info->fix.id, var->yres); | |
| if (var->vsync_len > 100) | |
| printk(KERN_ERR "%s: invalid vsync_len %d\n", | |
| info->fix.id, var->vsync_len); | |
| if (var->upper_margin > 63) | |
| printk(KERN_ERR "%s: invalid upper_margin %d\n", | |
| info->fix.id, var->upper_margin); | |
| if (var->lower_margin > 255) | |
| printk(KERN_ERR "%s: invalid lower_margin %d\n", | |
| info->fix.id, var->lower_margin); | |
| #endif | |
| LCDC_HCR = HCR_H_WIDTH(var->hsync_len) | | |
| HCR_H_WAIT_1(var->left_margin) | | |
| HCR_H_WAIT_2(var->right_margin); | |
| LCDC_VCR = VCR_V_WIDTH(var->vsync_len) | | |
| VCR_V_WAIT_1(var->upper_margin) | | |
| VCR_V_WAIT_2(var->lower_margin); | |
| LCDC_SIZE = SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres); | |
| LCDC_PCR = fbi->pcr; | |
| LCDC_PWMR = fbi->pwmr; | |
| LCDC_LSCR1 = fbi->lscr1; | |
| LCDC_DMACR = fbi->dmacr; | |
| return 0; | |
| } | |
| static void imxfb_setup_gpio(struct imxfb_info *fbi) | |
| { | |
| int width; | |
| LCDC_RMCR &= ~(RMCR_LCDC_EN | RMCR_SELF_REF); | |
| if( fbi->pcr & PCR_TFT ) | |
| width = 16; | |
| else | |
| width = 1 << ((fbi->pcr >> 28) & 0x3); | |
| switch(width) { | |
| case 16: | |
| imx_gpio_mode(PD30_PF_LD15); | |
| imx_gpio_mode(PD29_PF_LD14); | |
| imx_gpio_mode(PD28_PF_LD13); | |
| imx_gpio_mode(PD27_PF_LD12); | |
| imx_gpio_mode(PD26_PF_LD11); | |
| imx_gpio_mode(PD25_PF_LD10); | |
| imx_gpio_mode(PD24_PF_LD9); | |
| imx_gpio_mode(PD23_PF_LD8); | |
| case 8: | |
| imx_gpio_mode(PD22_PF_LD7); | |
| imx_gpio_mode(PD21_PF_LD6); | |
| imx_gpio_mode(PD20_PF_LD5); | |
| imx_gpio_mode(PD19_PF_LD4); | |
| case 4: | |
| imx_gpio_mode(PD18_PF_LD3); | |
| imx_gpio_mode(PD17_PF_LD2); | |
| case 2: | |
| imx_gpio_mode(PD16_PF_LD1); | |
| case 1: | |
| imx_gpio_mode(PD15_PF_LD0); | |
| } | |
| /* initialize GPIOs */ | |
| imx_gpio_mode(PD6_PF_LSCLK); | |
| imx_gpio_mode(PD11_PF_CONTRAST); | |
| imx_gpio_mode(PD14_PF_FLM_VSYNC); | |
| imx_gpio_mode(PD13_PF_LP_HSYNC); | |
| imx_gpio_mode(PD12_PF_ACD_OE); | |
| /* These are only needed for Sharp HR TFT displays */ | |
| if (fbi->pcr & PCR_SHARP) { | |
| imx_gpio_mode(PD7_PF_REV); | |
| imx_gpio_mode(PD8_PF_CLS); | |
| imx_gpio_mode(PD9_PF_PS); | |
| imx_gpio_mode(PD10_PF_SPL_SPR); | |
| } | |
| } | |
| #ifdef CONFIG_PM | |
| /* | |
| * Power management hooks. Note that we won't be called from IRQ context, | |
| * unlike the blank functions above, so we may sleep. | |
| */ | |
| static int imxfb_suspend(struct platform_device *dev, pm_message_t state) | |
| { | |
| struct imxfb_info *fbi = platform_get_drvdata(dev); | |
| pr_debug("%s\n",__func__); | |
| imxfb_disable_controller(fbi); | |
| return 0; | |
| } | |
| static int imxfb_resume(struct platform_device *dev) | |
| { | |
| struct imxfb_info *fbi = platform_get_drvdata(dev); | |
| pr_debug("%s\n",__func__); | |
| imxfb_enable_controller(fbi); | |
| return 0; | |
| } | |
| #else | |
| #define imxfb_suspend NULL | |
| #define imxfb_resume NULL | |
| #endif | |
| static int __init imxfb_init_fbinfo(struct device *dev) | |
| { | |
| struct imxfb_mach_info *inf = dev->platform_data; | |
| struct fb_info *info = dev_get_drvdata(dev); | |
| struct imxfb_info *fbi = info->par; | |
| pr_debug("%s\n",__func__); | |
| info->pseudo_palette = kmalloc( sizeof(u32) * 16, GFP_KERNEL); | |
| if (!info->pseudo_palette) | |
| return -ENOMEM; | |
| memset(fbi, 0, sizeof(struct imxfb_info)); | |
| fbi->dev = dev; | |
| strlcpy(info->fix.id, IMX_NAME, sizeof(info->fix.id)); | |
| info->fix.type = FB_TYPE_PACKED_PIXELS; | |
| info->fix.type_aux = 0; | |
| info->fix.xpanstep = 0; | |
| info->fix.ypanstep = 0; | |
| info->fix.ywrapstep = 0; | |
| info->fix.accel = FB_ACCEL_NONE; | |
| info->var.nonstd = 0; | |
| info->var.activate = FB_ACTIVATE_NOW; | |
| info->var.height = -1; | |
| info->var.width = -1; | |
| info->var.accel_flags = 0; | |
| info->var.vmode = FB_VMODE_NONINTERLACED; | |
| info->fbops = &imxfb_ops; | |
| info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST; | |
| fbi->rgb[RGB_16] = &def_rgb_16; | |
| fbi->rgb[RGB_8] = &def_rgb_8; | |
| fbi->max_xres = inf->xres; | |
| info->var.xres = inf->xres; | |
| info->var.xres_virtual = inf->xres; | |
| fbi->max_yres = inf->yres; | |
| info->var.yres = inf->yres; | |
| info->var.yres_virtual = inf->yres; | |
| fbi->max_bpp = inf->bpp; | |
| info->var.bits_per_pixel = inf->bpp; | |
| info->var.nonstd = inf->nonstd; | |
| info->var.pixclock = inf->pixclock; | |
| info->var.hsync_len = inf->hsync_len; | |
| info->var.left_margin = inf->left_margin; | |
| info->var.right_margin = inf->right_margin; | |
| info->var.vsync_len = inf->vsync_len; | |
| info->var.upper_margin = inf->upper_margin; | |
| info->var.lower_margin = inf->lower_margin; | |
| info->var.sync = inf->sync; | |
| info->var.grayscale = inf->cmap_greyscale; | |
| fbi->cmap_inverse = inf->cmap_inverse; | |
| fbi->cmap_static = inf->cmap_static; | |
| fbi->pcr = inf->pcr; | |
| fbi->lscr1 = inf->lscr1; | |
| fbi->dmacr = inf->dmacr; | |
| fbi->pwmr = inf->pwmr; | |
| fbi->lcd_power = inf->lcd_power; | |
| fbi->backlight_power = inf->backlight_power; | |
| info->fix.smem_len = fbi->max_xres * fbi->max_yres * | |
| fbi->max_bpp / 8; | |
| return 0; | |
| } | |
| /* | |
| * Allocates the DRAM memory for the frame buffer. This buffer is | |
| * remapped into a non-cached, non-buffered, memory region to | |
| * allow pixel writes to occur without flushing the cache. | |
| * Once this area is remapped, all virtual memory access to the | |
| * video memory should occur at the new region. | |
| */ | |
| static int __init imxfb_map_video_memory(struct fb_info *info) | |
| { | |
| struct imxfb_info *fbi = info->par; | |
| fbi->map_size = PAGE_ALIGN(info->fix.smem_len); | |
| fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size, | |
| &fbi->map_dma,GFP_KERNEL); | |
| if (fbi->map_cpu) { | |
| info->screen_base = fbi->map_cpu; | |
| fbi->screen_cpu = fbi->map_cpu; | |
| fbi->screen_dma = fbi->map_dma; | |
| info->fix.smem_start = fbi->screen_dma; | |
| } | |
| return fbi->map_cpu ? 0 : -ENOMEM; | |
| } | |
| static int __init imxfb_probe(struct platform_device *pdev) | |
| { | |
| struct imxfb_info *fbi; | |
| struct fb_info *info; | |
| struct imxfb_mach_info *inf; | |
| struct resource *res; | |
| int ret; | |
| printk("i.MX Framebuffer driver\n"); | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if(!res) | |
| return -ENODEV; | |
| inf = pdev->dev.platform_data; | |
| if(!inf) { | |
| dev_err(&pdev->dev,"No platform_data available\n"); | |
| return -ENOMEM; | |
| } | |
| info = framebuffer_alloc(sizeof(struct imxfb_info), &pdev->dev); | |
| if(!info) | |
| return -ENOMEM; | |
| fbi = info->par; | |
| platform_set_drvdata(pdev, info); | |
| ret = imxfb_init_fbinfo(&pdev->dev); | |
| if( ret < 0 ) | |
| goto failed_init; | |
| res = request_mem_region(res->start, res->end - res->start + 1, "IMXFB"); | |
| if (!res) { | |
| ret = -EBUSY; | |
| goto failed_regs; | |
| } | |
| if (!inf->fixed_screen_cpu) { | |
| ret = imxfb_map_video_memory(info); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to allocate video RAM: %d\n", ret); | |
| ret = -ENOMEM; | |
| goto failed_map; | |
| } | |
| } else { | |
| /* Fixed framebuffer mapping enables location of the screen in eSRAM */ | |
| fbi->map_cpu = inf->fixed_screen_cpu; | |
| fbi->map_dma = inf->fixed_screen_dma; | |
| info->screen_base = fbi->map_cpu; | |
| fbi->screen_cpu = fbi->map_cpu; | |
| fbi->screen_dma = fbi->map_dma; | |
| info->fix.smem_start = fbi->screen_dma; | |
| } | |
| /* | |
| * This makes sure that our colour bitfield | |
| * descriptors are correctly initialised. | |
| */ | |
| imxfb_check_var(&info->var, info); | |
| ret = fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0); | |
| if (ret < 0) | |
| goto failed_cmap; | |
| imxfb_setup_gpio(fbi); | |
| imxfb_set_par(info); | |
| ret = register_framebuffer(info); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "failed to register framebuffer\n"); | |
| goto failed_register; | |
| } | |
| imxfb_enable_controller(fbi); | |
| return 0; | |
| failed_register: | |
| fb_dealloc_cmap(&info->cmap); | |
| failed_cmap: | |
| if (!inf->fixed_screen_cpu) | |
| dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu, | |
| fbi->map_dma); | |
| failed_map: | |
| kfree(info->pseudo_palette); | |
| failed_regs: | |
| release_mem_region(res->start, res->end - res->start); | |
| failed_init: | |
| platform_set_drvdata(pdev, NULL); | |
| framebuffer_release(info); | |
| return ret; | |
| } | |
| static int imxfb_remove(struct platform_device *pdev) | |
| { | |
| struct fb_info *info = platform_get_drvdata(pdev); | |
| struct imxfb_info *fbi = info->par; | |
| struct resource *res; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| imxfb_disable_controller(fbi); | |
| unregister_framebuffer(info); | |
| fb_dealloc_cmap(&info->cmap); | |
| kfree(info->pseudo_palette); | |
| framebuffer_release(info); | |
| release_mem_region(res->start, res->end - res->start + 1); | |
| platform_set_drvdata(pdev, NULL); | |
| return 0; | |
| } | |
| void imxfb_shutdown(struct platform_device * dev) | |
| { | |
| struct fb_info *info = platform_get_drvdata(dev); | |
| struct imxfb_info *fbi = info->par; | |
| imxfb_disable_controller(fbi); | |
| } | |
| static struct platform_driver imxfb_driver = { | |
| .probe = imxfb_probe, | |
| .suspend = imxfb_suspend, | |
| .resume = imxfb_resume, | |
| .remove = imxfb_remove, | |
| .shutdown = imxfb_shutdown, | |
| .driver = { | |
| .name = "imx-fb", | |
| }, | |
| }; | |
| int __init imxfb_init(void) | |
| { | |
| return platform_driver_register(&imxfb_driver); | |
| } | |
| static void __exit imxfb_cleanup(void) | |
| { | |
| platform_driver_unregister(&imxfb_driver); | |
| } | |
| module_init(imxfb_init); | |
| module_exit(imxfb_cleanup); | |
| MODULE_DESCRIPTION("Motorola i.MX framebuffer driver"); | |
| MODULE_AUTHOR("Sascha Hauer, Pengutronix"); | |
| MODULE_LICENSE("GPL"); |